From eefaedd59cccaeddcde8f54f89c98a26cc570e82 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Wed, 7 May 2014 10:44:43 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6920 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- testhal/STM32/STM32F0xx/ADC/.cproject | 52 + testhal/STM32/STM32F0xx/ADC/.project | 38 + testhal/STM32/STM32F0xx/ADC/Makefile | 198 ++ testhal/STM32/STM32F0xx/ADC/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/ADC/halconf.h | 312 +++ testhal/STM32/STM32F0xx/ADC/main.c | 152 ++ testhal/STM32/STM32F0xx/ADC/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/ADC/readme.txt | 31 + testhal/STM32/STM32F0xx/EXT/.cproject | 52 + testhal/STM32/STM32F0xx/EXT/.project | 38 + testhal/STM32/STM32F0xx/EXT/Makefile | 198 ++ testhal/STM32/STM32F0xx/EXT/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/EXT/halconf.h | 312 +++ testhal/STM32/STM32F0xx/EXT/main.c | 98 + testhal/STM32/STM32F0xx/EXT/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/EXT/readme.txt | 30 + testhal/STM32/STM32F0xx/IRQ_STORM/.cproject | 52 + testhal/STM32/STM32F0xx/IRQ_STORM/.project | 38 + testhal/STM32/STM32F0xx/IRQ_STORM/Makefile | 198 ++ testhal/STM32/STM32F0xx/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/IRQ_STORM/halconf.h | 312 +++ testhal/STM32/STM32F0xx/IRQ_STORM/main.c | 332 +++ testhal/STM32/STM32F0xx/IRQ_STORM/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/IRQ_STORM/readme.txt | 31 + testhal/STM32/STM32F0xx/PWM-ICU/.cproject | 52 + testhal/STM32/STM32F0xx/PWM-ICU/.project | 38 + testhal/STM32/STM32F0xx/PWM-ICU/Makefile | 198 ++ testhal/STM32/STM32F0xx/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/PWM-ICU/halconf.h | 312 +++ testhal/STM32/STM32F0xx/PWM-ICU/main.c | 145 ++ testhal/STM32/STM32F0xx/PWM-ICU/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/PWM-ICU/readme.txt | 30 + testhal/STM32/STM32F0xx/SPI/.cproject | 52 + testhal/STM32/STM32F0xx/SPI/.project | 38 + testhal/STM32/STM32F0xx/SPI/Makefile | 198 ++ testhal/STM32/STM32F0xx/SPI/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/SPI/halconf.h | 312 +++ testhal/STM32/STM32F0xx/SPI/main.c | 162 ++ testhal/STM32/STM32F0xx/SPI/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/SPI/readme.txt | 30 + testhal/STM32/STM32F0xx/UART/.cproject | 52 + testhal/STM32/STM32F0xx/UART/.project | 38 + testhal/STM32/STM32F0xx/UART/Makefile | 198 ++ testhal/STM32/STM32F0xx/UART/chconf.h | 498 +++++ testhal/STM32/STM32F0xx/UART/halconf.h | 312 +++ testhal/STM32/STM32F0xx/UART/main.c | 142 ++ testhal/STM32/STM32F0xx/UART/mcuconf.h | 154 ++ testhal/STM32/STM32F0xx/UART/readme.txt | 31 + testhal/STM32/STM32F1xx/ADC/.cproject | 56 + testhal/STM32/STM32F1xx/ADC/.project | 33 + testhal/STM32/STM32F1xx/ADC/Makefile | 203 ++ testhal/STM32/STM32F1xx/ADC/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/ADC/halconf.h | 312 +++ testhal/STM32/STM32F1xx/ADC/main.c | 158 ++ testhal/STM32/STM32F1xx/ADC/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/ADC/readme.txt | 26 + testhal/STM32/STM32F1xx/CAN/.cproject | 56 + testhal/STM32/STM32F1xx/CAN/.project | 33 + testhal/STM32/STM32F1xx/CAN/Makefile | 203 ++ testhal/STM32/STM32F1xx/CAN/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/CAN/halconf.h | 312 +++ testhal/STM32/STM32F1xx/CAN/main.c | 111 + testhal/STM32/STM32F1xx/CAN/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/CAN/readme.txt | 26 + testhal/STM32/STM32F1xx/EXT/.cproject | 56 + testhal/STM32/STM32F1xx/EXT/.project | 33 + testhal/STM32/STM32F1xx/EXT/Makefile | 203 ++ testhal/STM32/STM32F1xx/EXT/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/EXT/halconf.h | 312 +++ testhal/STM32/STM32F1xx/EXT/main.c | 98 + testhal/STM32/STM32F1xx/EXT/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/EXT/readme.txt | 26 + testhal/STM32/STM32F1xx/IRQ_STORM/.cproject | 51 + testhal/STM32/STM32F1xx/IRQ_STORM/.project | 33 + testhal/STM32/STM32F1xx/IRQ_STORM/Makefile | 203 ++ testhal/STM32/STM32F1xx/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/IRQ_STORM/halconf.h | 312 +++ testhal/STM32/STM32F1xx/IRQ_STORM/main.c | 333 +++ testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/IRQ_STORM/readme.txt | 31 + testhal/STM32/STM32F1xx/PWM-ICU/.cproject | 51 + testhal/STM32/STM32F1xx/PWM-ICU/.project | 33 + testhal/STM32/STM32F1xx/PWM-ICU/Makefile | 203 ++ testhal/STM32/STM32F1xx/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/PWM-ICU/halconf.h | 312 +++ testhal/STM32/STM32F1xx/PWM-ICU/main.c | 141 ++ testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/PWM-ICU/readme.txt | 28 + testhal/STM32/STM32F1xx/SPI/.cproject | 51 + testhal/STM32/STM32F1xx/SPI/.project | 33 + testhal/STM32/STM32F1xx/SPI/Makefile | 203 ++ testhal/STM32/STM32F1xx/SPI/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/SPI/halconf.h | 311 +++ testhal/STM32/STM32F1xx/SPI/main.c | 136 ++ testhal/STM32/STM32F1xx/SPI/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/SPI/readme.txt | 26 + testhal/STM32/STM32F1xx/UART/.cproject | 51 + testhal/STM32/STM32F1xx/UART/.project | 33 + testhal/STM32/STM32F1xx/UART/Makefile | 203 ++ testhal/STM32/STM32F1xx/UART/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/UART/halconf.h | 312 +++ testhal/STM32/STM32F1xx/UART/main.c | 145 ++ testhal/STM32/STM32F1xx/UART/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/UART/readme.txt | 26 + testhal/STM32/STM32F1xx/USB_CDC/.cproject | 51 + testhal/STM32/STM32F1xx/USB_CDC/.project | 38 + testhal/STM32/STM32F1xx/USB_CDC/Makefile | 205 ++ testhal/STM32/STM32F1xx/USB_CDC/chconf.h | 498 +++++ testhal/STM32/STM32F1xx/USB_CDC/halconf.h | 312 +++ testhal/STM32/STM32F1xx/USB_CDC/main.c | 509 +++++ testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h | 199 ++ testhal/STM32/STM32F1xx/USB_CDC/readme.txt | 26 + testhal/STM32/STM32F1xx/USB_CDC_F107/.cproject | 50 + testhal/STM32/STM32F1xx/USB_CDC_F107/.project | 95 + testhal/STM32/STM32F1xx/USB_CDC_F107/Makefile | 209 ++ testhal/STM32/STM32F1xx/USB_CDC_F107/chconf.h | 531 +++++ testhal/STM32/STM32F1xx/USB_CDC_F107/halconf.h | 319 +++ testhal/STM32/STM32F1xx/USB_CDC_F107/main.c | 509 +++++ testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h | 207 ++ testhal/STM32/STM32F1xx/USB_CDC_F107/readme.txt | 26 + testhal/STM32/STM32F30x/ADC/.cproject | 52 + testhal/STM32/STM32F30x/ADC/.project | 90 + testhal/STM32/STM32F30x/ADC/Makefile | 203 ++ testhal/STM32/STM32F30x/ADC/chconf.h | 498 +++++ testhal/STM32/STM32F30x/ADC/halconf.h | 312 +++ testhal/STM32/STM32F30x/ADC/main.c | 172 ++ testhal/STM32/STM32F30x/ADC/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/ADC/readme.txt | 30 + testhal/STM32/STM32F30x/ADC_DUAL/.cproject | 52 + testhal/STM32/STM32F30x/ADC_DUAL/.project | 90 + testhal/STM32/STM32F30x/ADC_DUAL/Makefile | 203 ++ testhal/STM32/STM32F30x/ADC_DUAL/chconf.h | 498 +++++ testhal/STM32/STM32F30x/ADC_DUAL/halconf.h | 312 +++ testhal/STM32/STM32F30x/ADC_DUAL/main.c | 196 ++ testhal/STM32/STM32F30x/ADC_DUAL/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/ADC_DUAL/readme.txt | 30 + testhal/STM32/STM32F30x/CAN/.cproject | 52 + testhal/STM32/STM32F30x/CAN/.project | 90 + testhal/STM32/STM32F30x/CAN/Makefile | 203 ++ testhal/STM32/STM32F30x/CAN/chconf.h | 498 +++++ testhal/STM32/STM32F30x/CAN/halconf.h | 312 +++ testhal/STM32/STM32F30x/CAN/main.c | 109 + testhal/STM32/STM32F30x/CAN/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/CAN/readme.txt | 26 + testhal/STM32/STM32F30x/EXT/.cproject | 52 + testhal/STM32/STM32F30x/EXT/.project | 90 + testhal/STM32/STM32F30x/EXT/Makefile | 203 ++ testhal/STM32/STM32F30x/EXT/chconf.h | 498 +++++ testhal/STM32/STM32F30x/EXT/halconf.h | 312 +++ testhal/STM32/STM32F30x/EXT/main.c | 102 + testhal/STM32/STM32F30x/EXT/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/EXT/readme.txt | 30 + testhal/STM32/STM32F30x/IRQ_STORM/.cproject | 52 + testhal/STM32/STM32F30x/IRQ_STORM/.project | 38 + testhal/STM32/STM32F30x/IRQ_STORM/Makefile | 203 ++ testhal/STM32/STM32F30x/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F30x/IRQ_STORM/halconf.h | 312 +++ testhal/STM32/STM32F30x/IRQ_STORM/main.c | 335 +++ testhal/STM32/STM32F30x/IRQ_STORM/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/IRQ_STORM/readme.txt | 32 + testhal/STM32/STM32F30x/PWM-ICU/.cproject | 52 + testhal/STM32/STM32F30x/PWM-ICU/.project | 38 + testhal/STM32/STM32F30x/PWM-ICU/Makefile | 203 ++ testhal/STM32/STM32F30x/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32F30x/PWM-ICU/halconf.h | 312 +++ testhal/STM32/STM32F30x/PWM-ICU/main.c | 140 ++ testhal/STM32/STM32F30x/PWM-ICU/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/PWM-ICU/readme.txt | 30 + testhal/STM32/STM32F30x/SPI/.cproject | 52 + testhal/STM32/STM32F30x/SPI/.project | 90 + testhal/STM32/STM32F30x/SPI/Makefile | 203 ++ testhal/STM32/STM32F30x/SPI/chconf.h | 498 +++++ testhal/STM32/STM32F30x/SPI/halconf.h | 312 +++ testhal/STM32/STM32F30x/SPI/main.c | 162 ++ testhal/STM32/STM32F30x/SPI/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/SPI/readme.txt | 30 + testhal/STM32/STM32F30x/UART/.cproject | 52 + testhal/STM32/STM32F30x/UART/.project | 90 + testhal/STM32/STM32F30x/UART/Makefile | 203 ++ testhal/STM32/STM32F30x/UART/chconf.h | 498 +++++ testhal/STM32/STM32F30x/UART/halconf.h | 312 +++ testhal/STM32/STM32F30x/UART/main.c | 142 ++ testhal/STM32/STM32F30x/UART/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/UART/readme.txt | 31 + testhal/STM32/STM32F30x/USB_CDC/.cproject | 52 + testhal/STM32/STM32F30x/USB_CDC/.project | 43 + testhal/STM32/STM32F30x/USB_CDC/Makefile | 205 ++ testhal/STM32/STM32F30x/USB_CDC/chconf.h | 498 +++++ testhal/STM32/STM32F30x/USB_CDC/halconf.h | 312 +++ testhal/STM32/STM32F30x/USB_CDC/main.c | 516 +++++ testhal/STM32/STM32F30x/USB_CDC/mcuconf.h | 219 ++ testhal/STM32/STM32F30x/USB_CDC/readme.txt | 26 + testhal/STM32/STM32F37x/ADC/.cproject | 51 + testhal/STM32/STM32F37x/ADC/.project | 38 + testhal/STM32/STM32F37x/ADC/Makefile | 203 ++ testhal/STM32/STM32F37x/ADC/chconf.h | 498 +++++ testhal/STM32/STM32F37x/ADC/halconf.h | 312 +++ testhal/STM32/STM32F37x/ADC/main.c | 172 ++ testhal/STM32/STM32F37x/ADC/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/ADC/readme.txt | 31 + testhal/STM32/STM32F37x/CAN/.cproject | 51 + testhal/STM32/STM32F37x/CAN/.project | 38 + testhal/STM32/STM32F37x/CAN/Makefile | 203 ++ testhal/STM32/STM32F37x/CAN/chconf.h | 498 +++++ testhal/STM32/STM32F37x/CAN/halconf.h | 312 +++ testhal/STM32/STM32F37x/CAN/main.c | 109 + testhal/STM32/STM32F37x/CAN/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/CAN/readme.txt | 26 + testhal/STM32/STM32F37x/EXT/.cproject | 51 + testhal/STM32/STM32F37x/EXT/.project | 38 + testhal/STM32/STM32F37x/EXT/Makefile | 203 ++ testhal/STM32/STM32F37x/EXT/chconf.h | 498 +++++ testhal/STM32/STM32F37x/EXT/halconf.h | 312 +++ testhal/STM32/STM32F37x/EXT/main.c | 100 + testhal/STM32/STM32F37x/EXT/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/EXT/readme.txt | 30 + testhal/STM32/STM32F37x/I2C/.cproject | 51 + testhal/STM32/STM32F37x/I2C/.project | 38 + testhal/STM32/STM32F37x/I2C/Makefile | 203 ++ testhal/STM32/STM32F37x/I2C/chconf.h | 498 +++++ testhal/STM32/STM32F37x/I2C/halconf.h | 312 +++ testhal/STM32/STM32F37x/I2C/main.c | 111 + testhal/STM32/STM32F37x/I2C/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/I2C/readme.txt | 30 + testhal/STM32/STM32F37x/IRQ_STORM/.cproject | 52 + testhal/STM32/STM32F37x/IRQ_STORM/.project | 38 + testhal/STM32/STM32F37x/IRQ_STORM/Makefile | 203 ++ testhal/STM32/STM32F37x/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F37x/IRQ_STORM/halconf.h | 312 +++ testhal/STM32/STM32F37x/IRQ_STORM/main.c | 334 +++ testhal/STM32/STM32F37x/IRQ_STORM/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/IRQ_STORM/readme.txt | 31 + testhal/STM32/STM32F37x/PWM-ICU/.cproject | 51 + testhal/STM32/STM32F37x/PWM-ICU/.project | 38 + testhal/STM32/STM32F37x/PWM-ICU/Makefile | 203 ++ testhal/STM32/STM32F37x/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32F37x/PWM-ICU/halconf.h | 312 +++ testhal/STM32/STM32F37x/PWM-ICU/main.c | 138 ++ testhal/STM32/STM32F37x/PWM-ICU/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/PWM-ICU/readme.txt | 30 + testhal/STM32/STM32F37x/SDADC/.cproject | 52 + testhal/STM32/STM32F37x/SDADC/.project | 38 + testhal/STM32/STM32F37x/SDADC/Makefile | 203 ++ testhal/STM32/STM32F37x/SDADC/chconf.h | 498 +++++ testhal/STM32/STM32F37x/SDADC/halconf.h | 312 +++ testhal/STM32/STM32F37x/SDADC/main.c | 165 ++ testhal/STM32/STM32F37x/SDADC/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/SDADC/readme.txt | 31 + testhal/STM32/STM32F37x/SPI/.cproject | 51 + testhal/STM32/STM32F37x/SPI/.project | 38 + testhal/STM32/STM32F37x/SPI/Makefile | 203 ++ testhal/STM32/STM32F37x/SPI/chconf.h | 498 +++++ testhal/STM32/STM32F37x/SPI/halconf.h | 312 +++ testhal/STM32/STM32F37x/SPI/main.c | 161 ++ testhal/STM32/STM32F37x/SPI/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/SPI/readme.txt | 30 + testhal/STM32/STM32F37x/UART/.cproject | 51 + testhal/STM32/STM32F37x/UART/.project | 38 + testhal/STM32/STM32F37x/UART/Makefile | 203 ++ testhal/STM32/STM32F37x/UART/chconf.h | 498 +++++ testhal/STM32/STM32F37x/UART/halconf.h | 312 +++ testhal/STM32/STM32F37x/UART/main.c | 140 ++ testhal/STM32/STM32F37x/UART/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/UART/readme.txt | 31 + testhal/STM32/STM32F37x/USB_CDC/.cproject | 51 + testhal/STM32/STM32F37x/USB_CDC/.project | 43 + testhal/STM32/STM32F37x/USB_CDC/Makefile | 205 ++ testhal/STM32/STM32F37x/USB_CDC/chconf.h | 498 +++++ testhal/STM32/STM32F37x/USB_CDC/halconf.h | 312 +++ testhal/STM32/STM32F37x/USB_CDC/main.c | 516 +++++ testhal/STM32/STM32F37x/USB_CDC/mcuconf.h | 215 ++ testhal/STM32/STM32F37x/USB_CDC/readme.txt | 26 + testhal/STM32/STM32F4xx/ADC/.cproject | 52 + testhal/STM32/STM32F4xx/ADC/.project | 38 + testhal/STM32/STM32F4xx/ADC/Makefile | 203 ++ testhal/STM32/STM32F4xx/ADC/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/ADC/halconf.h | 312 +++ testhal/STM32/STM32F4xx/ADC/main.c | 160 ++ testhal/STM32/STM32F4xx/ADC/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/ADC/readme.txt | 30 + testhal/STM32/STM32F4xx/CAN/.cproject | 52 + testhal/STM32/STM32F4xx/CAN/.project | 90 + testhal/STM32/STM32F4xx/CAN/Makefile | 203 ++ testhal/STM32/STM32F4xx/CAN/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/CAN/halconf.h | 312 +++ testhal/STM32/STM32F4xx/CAN/main.c | 127 ++ testhal/STM32/STM32F4xx/CAN/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/CAN/readme.txt | 26 + testhal/STM32/STM32F4xx/DAC/.cproject | 52 + testhal/STM32/STM32F4xx/DAC/.project | 38 + testhal/STM32/STM32F4xx/DAC/Makefile | 203 ++ testhal/STM32/STM32F4xx/DAC/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/DAC/halconf.h | 319 +++ testhal/STM32/STM32F4xx/DAC/main.c | 43 + testhal/STM32/STM32F4xx/DAC/mcuconf.h | 332 +++ testhal/STM32/STM32F4xx/DAC/readme.txt | 30 + testhal/STM32/STM32F4xx/DMA_STORM/.cproject | 51 + testhal/STM32/STM32F4xx/DMA_STORM/.project | 38 + testhal/STM32/STM32F4xx/DMA_STORM/Makefile | 203 ++ testhal/STM32/STM32F4xx/DMA_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/DMA_STORM/halconf.h | 312 +++ testhal/STM32/STM32F4xx/DMA_STORM/main.c | 223 ++ testhal/STM32/STM32F4xx/DMA_STORM/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/EXT/.cproject | 52 + testhal/STM32/STM32F4xx/EXT/.project | 38 + testhal/STM32/STM32F4xx/EXT/Makefile | 203 ++ testhal/STM32/STM32F4xx/EXT/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/EXT/halconf.h | 312 +++ testhal/STM32/STM32F4xx/EXT/main.c | 100 + testhal/STM32/STM32F4xx/EXT/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/EXT/readme.txt | 30 + testhal/STM32/STM32F4xx/GPT/.cproject | 52 + testhal/STM32/STM32F4xx/GPT/.project | 38 + testhal/STM32/STM32F4xx/GPT/Makefile | 203 ++ testhal/STM32/STM32F4xx/GPT/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/GPT/halconf.h | 312 +++ testhal/STM32/STM32F4xx/GPT/main.c | 98 + testhal/STM32/STM32F4xx/GPT/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/GPT/readme.txt | 30 + testhal/STM32/STM32F4xx/I2C/.cproject | 52 + testhal/STM32/STM32F4xx/I2C/.project | 38 + testhal/STM32/STM32F4xx/I2C/Makefile | 203 ++ testhal/STM32/STM32F4xx/I2C/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/I2C/halconf.h | 312 +++ testhal/STM32/STM32F4xx/I2C/main.c | 181 ++ testhal/STM32/STM32F4xx/I2C/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/I2S/.cproject | 52 + testhal/STM32/STM32F4xx/I2S/.project | 38 + testhal/STM32/STM32F4xx/I2S/Makefile | 203 ++ testhal/STM32/STM32F4xx/I2S/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/I2S/halconf.h | 312 +++ testhal/STM32/STM32F4xx/I2S/main.c | 79 + testhal/STM32/STM32F4xx/I2S/mcuconf.h | 319 +++ testhal/STM32/STM32F4xx/I2S/readme.txt | 30 + testhal/STM32/STM32F4xx/IRQ_STORM/.cproject | 52 + testhal/STM32/STM32F4xx/IRQ_STORM/.project | 38 + testhal/STM32/STM32F4xx/IRQ_STORM/Makefile | 203 ++ testhal/STM32/STM32F4xx/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/IRQ_STORM/halconf.h | 312 +++ testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.ewp | 2289 +++++++++++++++++++ testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.eww | 10 + testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.icf | 39 + testhal/STM32/STM32F4xx/IRQ_STORM/keil/ch.uvproj | 945 ++++++++ testhal/STM32/STM32F4xx/IRQ_STORM/main.c | 333 +++ testhal/STM32/STM32F4xx/IRQ_STORM/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/IRQ_STORM/readme.txt | 31 + testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.cproject | 52 + testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.project | 38 + testhal/STM32/STM32F4xx/IRQ_STORM_FPU/Makefile | 203 ++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/extfunc.c | 23 + testhal/STM32/STM32F4xx/IRQ_STORM_FPU/halconf.h | 312 +++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp | 2292 ++++++++++++++++++++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww | 10 + testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf | 39 + .../STM32/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj | 945 ++++++++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/main.c | 304 +++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/IRQ_STORM_FPU/readme.txt | 30 + testhal/STM32/STM32F4xx/PWM-ICU/.cproject | 52 + testhal/STM32/STM32F4xx/PWM-ICU/.project | 38 + testhal/STM32/STM32F4xx/PWM-ICU/Makefile | 203 ++ testhal/STM32/STM32F4xx/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/PWM-ICU/halconf.h | 312 +++ testhal/STM32/STM32F4xx/PWM-ICU/main.c | 140 ++ testhal/STM32/STM32F4xx/PWM-ICU/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/PWM-ICU/readme.txt | 30 + testhal/STM32/STM32F4xx/RTC/.cproject | 52 + testhal/STM32/STM32F4xx/RTC/.project | 38 + testhal/STM32/STM32F4xx/RTC/Makefile | 208 ++ testhal/STM32/STM32F4xx/RTC/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/RTC/halconf.h | 319 +++ testhal/STM32/STM32F4xx/RTC/main.c | 239 ++ testhal/STM32/STM32F4xx/RTC/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/SDC/.cproject | 51 + testhal/STM32/STM32F4xx/SDC/.project | 38 + testhal/STM32/STM32F4xx/SDC/Makefile | 205 ++ testhal/STM32/STM32F4xx/SDC/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/SDC/halconf.h | 326 +++ testhal/STM32/STM32F4xx/SDC/main.c | 223 ++ testhal/STM32/STM32F4xx/SDC/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/SDC/readme.txt | 26 + testhal/STM32/STM32F4xx/SPI/.cproject | 52 + testhal/STM32/STM32F4xx/SPI/.project | 38 + testhal/STM32/STM32F4xx/SPI/Makefile | 203 ++ testhal/STM32/STM32F4xx/SPI/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/SPI/halconf.h | 312 +++ testhal/STM32/STM32F4xx/SPI/main.c | 138 ++ testhal/STM32/STM32F4xx/SPI/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/SPI/readme.txt | 30 + testhal/STM32/STM32F4xx/UART/.cproject | 56 + testhal/STM32/STM32F4xx/UART/.project | 38 + testhal/STM32/STM32F4xx/UART/Makefile | 203 ++ testhal/STM32/STM32F4xx/UART/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/UART/halconf.h | 312 +++ testhal/STM32/STM32F4xx/UART/main.c | 160 ++ testhal/STM32/STM32F4xx/UART/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/UART/readme.txt | 31 + testhal/STM32/STM32F4xx/USB_CDC/.cproject | 51 + testhal/STM32/STM32F4xx/USB_CDC/.project | 38 + testhal/STM32/STM32F4xx/USB_CDC/Makefile | 205 ++ testhal/STM32/STM32F4xx/USB_CDC/chconf.h | 498 +++++ testhal/STM32/STM32F4xx/USB_CDC/halconf.h | 319 +++ testhal/STM32/STM32F4xx/USB_CDC/main.c | 525 +++++ testhal/STM32/STM32F4xx/USB_CDC/mcuconf.h | 304 +++ testhal/STM32/STM32F4xx/USB_CDC/readme.txt | 26 + testhal/STM32/STM32L1xx/ADC/.cproject | 51 + testhal/STM32/STM32L1xx/ADC/.project | 33 + testhal/STM32/STM32L1xx/ADC/Makefile | 198 ++ testhal/STM32/STM32L1xx/ADC/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/ADC/halconf.h | 312 +++ testhal/STM32/STM32L1xx/ADC/main.c | 164 ++ testhal/STM32/STM32L1xx/ADC/mcuconf.h | 177 ++ testhal/STM32/STM32L1xx/ADC/readme.txt | 31 + testhal/STM32/STM32L1xx/EXT/.cproject | 51 + testhal/STM32/STM32L1xx/EXT/.project | 33 + testhal/STM32/STM32L1xx/EXT/Makefile | 198 ++ testhal/STM32/STM32L1xx/EXT/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/EXT/halconf.h | 319 +++ testhal/STM32/STM32L1xx/EXT/main.c | 98 + testhal/STM32/STM32L1xx/EXT/mcuconf.h | 171 ++ testhal/STM32/STM32L1xx/EXT/readme.txt | 30 + testhal/STM32/STM32L1xx/IRQ_STORM/.cproject | 51 + testhal/STM32/STM32L1xx/IRQ_STORM/.project | 33 + testhal/STM32/STM32L1xx/IRQ_STORM/Makefile | 198 ++ testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h | 319 +++ testhal/STM32/STM32L1xx/IRQ_STORM/main.c | 335 +++ testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h | 177 ++ testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt | 31 + testhal/STM32/STM32L1xx/PWM-ICU/.cproject | 51 + testhal/STM32/STM32L1xx/PWM-ICU/.project | 33 + testhal/STM32/STM32L1xx/PWM-ICU/Makefile | 198 ++ testhal/STM32/STM32L1xx/PWM-ICU/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/PWM-ICU/halconf.h | 319 +++ testhal/STM32/STM32L1xx/PWM-ICU/main.c | 140 ++ testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h | 177 ++ testhal/STM32/STM32L1xx/PWM-ICU/readme.txt | 31 + testhal/STM32/STM32L1xx/SPI/.cproject | 51 + testhal/STM32/STM32L1xx/SPI/.project | 33 + testhal/STM32/STM32L1xx/SPI/Makefile | 198 ++ testhal/STM32/STM32L1xx/SPI/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/SPI/halconf.h | 319 +++ testhal/STM32/STM32L1xx/SPI/main.c | 139 ++ testhal/STM32/STM32L1xx/SPI/mcuconf.h | 177 ++ testhal/STM32/STM32L1xx/SPI/readme.txt | 31 + testhal/STM32/STM32L1xx/UART/.cproject | 51 + testhal/STM32/STM32L1xx/UART/.project | 33 + testhal/STM32/STM32L1xx/UART/Makefile | 198 ++ testhal/STM32/STM32L1xx/UART/chconf.h | 498 +++++ testhal/STM32/STM32L1xx/UART/halconf.h | 319 +++ testhal/STM32/STM32L1xx/UART/main.c | 142 ++ testhal/STM32/STM32L1xx/UART/mcuconf.h | 177 ++ testhal/STM32/STM32L1xx/UART/readme.txt | 32 + testhal/STM32F0xx/ADC/.cproject | 52 - testhal/STM32F0xx/ADC/.project | 38 - testhal/STM32F0xx/ADC/Makefile | 198 -- testhal/STM32F0xx/ADC/chconf.h | 498 ----- testhal/STM32F0xx/ADC/halconf.h | 312 --- testhal/STM32F0xx/ADC/main.c | 152 -- testhal/STM32F0xx/ADC/mcuconf.h | 154 -- testhal/STM32F0xx/ADC/readme.txt | 31 - testhal/STM32F0xx/EXT/.cproject | 52 - testhal/STM32F0xx/EXT/.project | 38 - testhal/STM32F0xx/EXT/Makefile | 198 -- testhal/STM32F0xx/EXT/chconf.h | 498 ----- testhal/STM32F0xx/EXT/halconf.h | 312 --- testhal/STM32F0xx/EXT/main.c | 98 - testhal/STM32F0xx/EXT/mcuconf.h | 154 -- testhal/STM32F0xx/EXT/readme.txt | 30 - testhal/STM32F0xx/IRQ_STORM/.cproject | 52 - testhal/STM32F0xx/IRQ_STORM/.project | 38 - testhal/STM32F0xx/IRQ_STORM/Makefile | 198 -- testhal/STM32F0xx/IRQ_STORM/chconf.h | 498 ----- testhal/STM32F0xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F0xx/IRQ_STORM/main.c | 332 --- testhal/STM32F0xx/IRQ_STORM/mcuconf.h | 154 -- testhal/STM32F0xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F0xx/PWM-ICU/.cproject | 52 - testhal/STM32F0xx/PWM-ICU/.project | 38 - testhal/STM32F0xx/PWM-ICU/Makefile | 198 -- testhal/STM32F0xx/PWM-ICU/chconf.h | 498 ----- testhal/STM32F0xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F0xx/PWM-ICU/main.c | 145 -- testhal/STM32F0xx/PWM-ICU/mcuconf.h | 154 -- testhal/STM32F0xx/PWM-ICU/readme.txt | 30 - testhal/STM32F0xx/SPI/.cproject | 52 - testhal/STM32F0xx/SPI/.project | 38 - testhal/STM32F0xx/SPI/Makefile | 198 -- testhal/STM32F0xx/SPI/chconf.h | 498 ----- testhal/STM32F0xx/SPI/halconf.h | 312 --- testhal/STM32F0xx/SPI/main.c | 162 -- testhal/STM32F0xx/SPI/mcuconf.h | 154 -- testhal/STM32F0xx/SPI/readme.txt | 30 - testhal/STM32F0xx/UART/.cproject | 52 - testhal/STM32F0xx/UART/.project | 38 - testhal/STM32F0xx/UART/Makefile | 198 -- testhal/STM32F0xx/UART/chconf.h | 498 ----- testhal/STM32F0xx/UART/halconf.h | 312 --- testhal/STM32F0xx/UART/main.c | 142 -- testhal/STM32F0xx/UART/mcuconf.h | 154 -- testhal/STM32F0xx/UART/readme.txt | 31 - testhal/STM32F1xx/ADC/.cproject | 56 - testhal/STM32F1xx/ADC/.project | 33 - testhal/STM32F1xx/ADC/Makefile | 203 -- testhal/STM32F1xx/ADC/chconf.h | 498 ----- testhal/STM32F1xx/ADC/halconf.h | 312 --- testhal/STM32F1xx/ADC/main.c | 158 -- testhal/STM32F1xx/ADC/mcuconf.h | 199 -- testhal/STM32F1xx/ADC/readme.txt | 26 - testhal/STM32F1xx/CAN/.cproject | 56 - testhal/STM32F1xx/CAN/.project | 33 - testhal/STM32F1xx/CAN/Makefile | 203 -- testhal/STM32F1xx/CAN/chconf.h | 498 ----- testhal/STM32F1xx/CAN/halconf.h | 312 --- testhal/STM32F1xx/CAN/main.c | 111 - testhal/STM32F1xx/CAN/mcuconf.h | 199 -- testhal/STM32F1xx/CAN/readme.txt | 26 - testhal/STM32F1xx/EXT/.cproject | 56 - testhal/STM32F1xx/EXT/.project | 33 - testhal/STM32F1xx/EXT/Makefile | 203 -- testhal/STM32F1xx/EXT/chconf.h | 498 ----- testhal/STM32F1xx/EXT/halconf.h | 312 --- testhal/STM32F1xx/EXT/main.c | 98 - testhal/STM32F1xx/EXT/mcuconf.h | 199 -- testhal/STM32F1xx/EXT/readme.txt | 26 - testhal/STM32F1xx/IRQ_STORM/.cproject | 51 - testhal/STM32F1xx/IRQ_STORM/.project | 33 - testhal/STM32F1xx/IRQ_STORM/Makefile | 203 -- testhal/STM32F1xx/IRQ_STORM/chconf.h | 498 ----- testhal/STM32F1xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F1xx/IRQ_STORM/main.c | 333 --- testhal/STM32F1xx/IRQ_STORM/mcuconf.h | 199 -- testhal/STM32F1xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F1xx/PWM-ICU/.cproject | 51 - testhal/STM32F1xx/PWM-ICU/.project | 33 - testhal/STM32F1xx/PWM-ICU/Makefile | 203 -- testhal/STM32F1xx/PWM-ICU/chconf.h | 498 ----- testhal/STM32F1xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F1xx/PWM-ICU/main.c | 141 -- testhal/STM32F1xx/PWM-ICU/mcuconf.h | 199 -- testhal/STM32F1xx/PWM-ICU/readme.txt | 28 - testhal/STM32F1xx/SPI/.cproject | 51 - testhal/STM32F1xx/SPI/.project | 33 - testhal/STM32F1xx/SPI/Makefile | 203 -- testhal/STM32F1xx/SPI/chconf.h | 498 ----- testhal/STM32F1xx/SPI/halconf.h | 311 --- testhal/STM32F1xx/SPI/main.c | 136 -- testhal/STM32F1xx/SPI/mcuconf.h | 199 -- testhal/STM32F1xx/SPI/readme.txt | 26 - testhal/STM32F1xx/UART/.cproject | 51 - testhal/STM32F1xx/UART/.project | 33 - testhal/STM32F1xx/UART/Makefile | 203 -- testhal/STM32F1xx/UART/chconf.h | 498 ----- testhal/STM32F1xx/UART/halconf.h | 312 --- testhal/STM32F1xx/UART/main.c | 145 -- testhal/STM32F1xx/UART/mcuconf.h | 199 -- testhal/STM32F1xx/UART/readme.txt | 26 - testhal/STM32F1xx/USB_CDC/.cproject | 51 - testhal/STM32F1xx/USB_CDC/.project | 38 - testhal/STM32F1xx/USB_CDC/Makefile | 205 -- testhal/STM32F1xx/USB_CDC/chconf.h | 498 ----- testhal/STM32F1xx/USB_CDC/halconf.h | 312 --- testhal/STM32F1xx/USB_CDC/main.c | 509 ----- testhal/STM32F1xx/USB_CDC/mcuconf.h | 199 -- testhal/STM32F1xx/USB_CDC/readme.txt | 26 - testhal/STM32F1xx/USB_CDC_F107/.cproject | 50 - testhal/STM32F1xx/USB_CDC_F107/.project | 95 - testhal/STM32F1xx/USB_CDC_F107/Makefile | 209 -- testhal/STM32F1xx/USB_CDC_F107/chconf.h | 531 ----- testhal/STM32F1xx/USB_CDC_F107/halconf.h | 319 --- testhal/STM32F1xx/USB_CDC_F107/main.c | 509 ----- testhal/STM32F1xx/USB_CDC_F107/mcuconf.h | 207 -- testhal/STM32F1xx/USB_CDC_F107/readme.txt | 26 - testhal/STM32F30x/ADC/.cproject | 52 - testhal/STM32F30x/ADC/.project | 90 - testhal/STM32F30x/ADC/Makefile | 203 -- testhal/STM32F30x/ADC/chconf.h | 498 ----- testhal/STM32F30x/ADC/halconf.h | 312 --- testhal/STM32F30x/ADC/main.c | 172 -- testhal/STM32F30x/ADC/mcuconf.h | 219 -- testhal/STM32F30x/ADC/readme.txt | 30 - testhal/STM32F30x/ADC_DUAL/.cproject | 52 - testhal/STM32F30x/ADC_DUAL/.project | 90 - testhal/STM32F30x/ADC_DUAL/Makefile | 203 -- testhal/STM32F30x/ADC_DUAL/chconf.h | 498 ----- testhal/STM32F30x/ADC_DUAL/halconf.h | 312 --- testhal/STM32F30x/ADC_DUAL/main.c | 196 -- testhal/STM32F30x/ADC_DUAL/mcuconf.h | 219 -- testhal/STM32F30x/ADC_DUAL/readme.txt | 30 - testhal/STM32F30x/CAN/.cproject | 52 - testhal/STM32F30x/CAN/.project | 90 - testhal/STM32F30x/CAN/Makefile | 203 -- testhal/STM32F30x/CAN/chconf.h | 498 ----- testhal/STM32F30x/CAN/halconf.h | 312 --- testhal/STM32F30x/CAN/main.c | 109 - testhal/STM32F30x/CAN/mcuconf.h | 219 -- testhal/STM32F30x/CAN/readme.txt | 26 - testhal/STM32F30x/EXT/.cproject | 52 - testhal/STM32F30x/EXT/.project | 90 - testhal/STM32F30x/EXT/Makefile | 203 -- testhal/STM32F30x/EXT/chconf.h | 498 ----- testhal/STM32F30x/EXT/halconf.h | 312 --- testhal/STM32F30x/EXT/main.c | 102 - testhal/STM32F30x/EXT/mcuconf.h | 219 -- testhal/STM32F30x/EXT/readme.txt | 30 - testhal/STM32F30x/IRQ_STORM/.cproject | 52 - testhal/STM32F30x/IRQ_STORM/.project | 38 - testhal/STM32F30x/IRQ_STORM/Makefile | 203 -- testhal/STM32F30x/IRQ_STORM/chconf.h | 498 ----- testhal/STM32F30x/IRQ_STORM/halconf.h | 312 --- testhal/STM32F30x/IRQ_STORM/main.c | 335 --- testhal/STM32F30x/IRQ_STORM/mcuconf.h | 219 -- testhal/STM32F30x/IRQ_STORM/readme.txt | 32 - testhal/STM32F30x/PWM-ICU/.cproject | 52 - testhal/STM32F30x/PWM-ICU/.project | 38 - testhal/STM32F30x/PWM-ICU/Makefile | 203 -- testhal/STM32F30x/PWM-ICU/chconf.h | 498 ----- testhal/STM32F30x/PWM-ICU/halconf.h | 312 --- testhal/STM32F30x/PWM-ICU/main.c | 140 -- testhal/STM32F30x/PWM-ICU/mcuconf.h | 219 -- testhal/STM32F30x/PWM-ICU/readme.txt | 30 - testhal/STM32F30x/SPI/.cproject | 52 - testhal/STM32F30x/SPI/.project | 90 - testhal/STM32F30x/SPI/Makefile | 203 -- testhal/STM32F30x/SPI/chconf.h | 498 ----- testhal/STM32F30x/SPI/halconf.h | 312 --- testhal/STM32F30x/SPI/main.c | 162 -- testhal/STM32F30x/SPI/mcuconf.h | 219 -- testhal/STM32F30x/SPI/readme.txt | 30 - testhal/STM32F30x/UART/.cproject | 52 - testhal/STM32F30x/UART/.project | 90 - testhal/STM32F30x/UART/Makefile | 203 -- testhal/STM32F30x/UART/chconf.h | 498 ----- testhal/STM32F30x/UART/halconf.h | 312 --- testhal/STM32F30x/UART/main.c | 142 -- testhal/STM32F30x/UART/mcuconf.h | 219 -- testhal/STM32F30x/UART/readme.txt | 31 - testhal/STM32F30x/USB_CDC/.cproject | 52 - testhal/STM32F30x/USB_CDC/.project | 43 - testhal/STM32F30x/USB_CDC/Makefile | 205 -- testhal/STM32F30x/USB_CDC/chconf.h | 498 ----- testhal/STM32F30x/USB_CDC/halconf.h | 312 --- testhal/STM32F30x/USB_CDC/main.c | 516 ----- testhal/STM32F30x/USB_CDC/mcuconf.h | 219 -- testhal/STM32F30x/USB_CDC/readme.txt | 26 - testhal/STM32F37x/ADC/.cproject | 51 - testhal/STM32F37x/ADC/.project | 38 - testhal/STM32F37x/ADC/Makefile | 203 -- testhal/STM32F37x/ADC/chconf.h | 498 ----- testhal/STM32F37x/ADC/halconf.h | 312 --- testhal/STM32F37x/ADC/main.c | 172 -- testhal/STM32F37x/ADC/mcuconf.h | 215 -- testhal/STM32F37x/ADC/readme.txt | 31 - testhal/STM32F37x/CAN/.cproject | 51 - testhal/STM32F37x/CAN/.project | 38 - testhal/STM32F37x/CAN/Makefile | 203 -- testhal/STM32F37x/CAN/chconf.h | 498 ----- testhal/STM32F37x/CAN/halconf.h | 312 --- testhal/STM32F37x/CAN/main.c | 109 - testhal/STM32F37x/CAN/mcuconf.h | 215 -- testhal/STM32F37x/CAN/readme.txt | 26 - testhal/STM32F37x/EXT/.cproject | 51 - testhal/STM32F37x/EXT/.project | 38 - testhal/STM32F37x/EXT/Makefile | 203 -- testhal/STM32F37x/EXT/chconf.h | 498 ----- testhal/STM32F37x/EXT/halconf.h | 312 --- testhal/STM32F37x/EXT/main.c | 100 - testhal/STM32F37x/EXT/mcuconf.h | 215 -- testhal/STM32F37x/EXT/readme.txt | 30 - testhal/STM32F37x/I2C/.cproject | 51 - testhal/STM32F37x/I2C/.project | 38 - testhal/STM32F37x/I2C/Makefile | 203 -- testhal/STM32F37x/I2C/chconf.h | 498 ----- testhal/STM32F37x/I2C/halconf.h | 312 --- testhal/STM32F37x/I2C/main.c | 111 - testhal/STM32F37x/I2C/mcuconf.h | 215 -- testhal/STM32F37x/I2C/readme.txt | 30 - testhal/STM32F37x/IRQ_STORM/.cproject | 52 - testhal/STM32F37x/IRQ_STORM/.project | 38 - testhal/STM32F37x/IRQ_STORM/Makefile | 203 -- testhal/STM32F37x/IRQ_STORM/chconf.h | 498 ----- testhal/STM32F37x/IRQ_STORM/halconf.h | 312 --- testhal/STM32F37x/IRQ_STORM/main.c | 334 --- testhal/STM32F37x/IRQ_STORM/mcuconf.h | 215 -- testhal/STM32F37x/IRQ_STORM/readme.txt | 31 - testhal/STM32F37x/PWM-ICU/.cproject | 51 - testhal/STM32F37x/PWM-ICU/.project | 38 - testhal/STM32F37x/PWM-ICU/Makefile | 203 -- testhal/STM32F37x/PWM-ICU/chconf.h | 498 ----- testhal/STM32F37x/PWM-ICU/halconf.h | 312 --- testhal/STM32F37x/PWM-ICU/main.c | 138 -- testhal/STM32F37x/PWM-ICU/mcuconf.h | 215 -- testhal/STM32F37x/PWM-ICU/readme.txt | 30 - testhal/STM32F37x/SDADC/.cproject | 52 - testhal/STM32F37x/SDADC/.project | 38 - testhal/STM32F37x/SDADC/Makefile | 203 -- testhal/STM32F37x/SDADC/chconf.h | 498 ----- testhal/STM32F37x/SDADC/halconf.h | 312 --- testhal/STM32F37x/SDADC/main.c | 165 -- testhal/STM32F37x/SDADC/mcuconf.h | 215 -- testhal/STM32F37x/SDADC/readme.txt | 31 - testhal/STM32F37x/SPI/.cproject | 51 - testhal/STM32F37x/SPI/.project | 38 - testhal/STM32F37x/SPI/Makefile | 203 -- testhal/STM32F37x/SPI/chconf.h | 498 ----- testhal/STM32F37x/SPI/halconf.h | 312 --- testhal/STM32F37x/SPI/main.c | 161 -- testhal/STM32F37x/SPI/mcuconf.h | 215 -- testhal/STM32F37x/SPI/readme.txt | 30 - testhal/STM32F37x/UART/.cproject | 51 - testhal/STM32F37x/UART/.project | 38 - testhal/STM32F37x/UART/Makefile | 203 -- testhal/STM32F37x/UART/chconf.h | 498 ----- testhal/STM32F37x/UART/halconf.h | 312 --- testhal/STM32F37x/UART/main.c | 140 -- testhal/STM32F37x/UART/mcuconf.h | 215 -- testhal/STM32F37x/UART/readme.txt | 31 - testhal/STM32F37x/USB_CDC/.cproject | 51 - testhal/STM32F37x/USB_CDC/.project | 43 - testhal/STM32F37x/USB_CDC/Makefile | 205 -- testhal/STM32F37x/USB_CDC/chconf.h | 498 ----- testhal/STM32F37x/USB_CDC/halconf.h | 312 --- testhal/STM32F37x/USB_CDC/main.c | 516 ----- testhal/STM32F37x/USB_CDC/mcuconf.h | 215 -- testhal/STM32F37x/USB_CDC/readme.txt | 26 - testhal/STM32F4xx/ADC/.cproject | 52 - testhal/STM32F4xx/ADC/.project | 38 - testhal/STM32F4xx/ADC/Makefile | 203 -- testhal/STM32F4xx/ADC/chconf.h | 498 ----- testhal/STM32F4xx/ADC/halconf.h | 312 --- testhal/STM32F4xx/ADC/main.c | 160 -- testhal/STM32F4xx/ADC/mcuconf.h | 304 --- testhal/STM32F4xx/ADC/readme.txt | 30 - testhal/STM32F4xx/CAN/.cproject | 52 - testhal/STM32F4xx/CAN/.project | 90 - testhal/STM32F4xx/CAN/Makefile | 203 -- testhal/STM32F4xx/CAN/chconf.h | 498 ----- testhal/STM32F4xx/CAN/halconf.h | 312 --- testhal/STM32F4xx/CAN/main.c | 127 -- testhal/STM32F4xx/CAN/mcuconf.h | 304 --- testhal/STM32F4xx/CAN/readme.txt | 26 - testhal/STM32F4xx/DAC/.cproject | 52 - testhal/STM32F4xx/DAC/.project | 38 - testhal/STM32F4xx/DAC/Makefile | 203 -- testhal/STM32F4xx/DAC/chconf.h | 498 ----- testhal/STM32F4xx/DAC/halconf.h | 319 --- testhal/STM32F4xx/DAC/main.c | 43 - testhal/STM32F4xx/DAC/mcuconf.h | 332 --- testhal/STM32F4xx/DAC/readme.txt | 30 - testhal/STM32F4xx/DMA_STORM/.cproject | 51 - testhal/STM32F4xx/DMA_STORM/.project | 38 - testhal/STM32F4xx/DMA_STORM/Makefile | 203 -- testhal/STM32F4xx/DMA_STORM/chconf.h | 498 ----- testhal/STM32F4xx/DMA_STORM/halconf.h | 312 --- testhal/STM32F4xx/DMA_STORM/main.c | 223 -- testhal/STM32F4xx/DMA_STORM/mcuconf.h | 304 --- testhal/STM32F4xx/EXT/.cproject | 52 - testhal/STM32F4xx/EXT/.project | 38 - testhal/STM32F4xx/EXT/Makefile | 203 -- testhal/STM32F4xx/EXT/chconf.h | 498 ----- testhal/STM32F4xx/EXT/halconf.h | 312 --- testhal/STM32F4xx/EXT/main.c | 100 - testhal/STM32F4xx/EXT/mcuconf.h | 304 --- testhal/STM32F4xx/EXT/readme.txt | 30 - testhal/STM32F4xx/GPT/.cproject | 52 - testhal/STM32F4xx/GPT/.project | 38 - testhal/STM32F4xx/GPT/Makefile | 203 -- testhal/STM32F4xx/GPT/chconf.h | 498 ----- testhal/STM32F4xx/GPT/halconf.h | 312 --- testhal/STM32F4xx/GPT/main.c | 98 - testhal/STM32F4xx/GPT/mcuconf.h | 304 --- testhal/STM32F4xx/GPT/readme.txt | 30 - testhal/STM32F4xx/I2C/.cproject | 52 - testhal/STM32F4xx/I2C/.project | 38 - testhal/STM32F4xx/I2C/Makefile | 203 -- testhal/STM32F4xx/I2C/chconf.h | 498 ----- testhal/STM32F4xx/I2C/halconf.h | 312 --- testhal/STM32F4xx/I2C/main.c | 181 -- testhal/STM32F4xx/I2C/mcuconf.h | 304 --- testhal/STM32F4xx/I2S/.cproject | 52 - testhal/STM32F4xx/I2S/.project | 38 - testhal/STM32F4xx/I2S/Makefile | 203 -- testhal/STM32F4xx/I2S/chconf.h | 498 ----- testhal/STM32F4xx/I2S/halconf.h | 312 --- testhal/STM32F4xx/I2S/main.c | 79 - testhal/STM32F4xx/I2S/mcuconf.h | 319 --- testhal/STM32F4xx/I2S/readme.txt | 30 - testhal/STM32F4xx/IRQ_STORM/.cproject | 52 - testhal/STM32F4xx/IRQ_STORM/.project | 38 - testhal/STM32F4xx/IRQ_STORM/Makefile | 203 -- testhal/STM32F4xx/IRQ_STORM/chconf.h | 498 ----- testhal/STM32F4xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp | 2289 ------------------- testhal/STM32F4xx/IRQ_STORM/iar/ch.eww | 10 - testhal/STM32F4xx/IRQ_STORM/iar/ch.icf | 39 - testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj | 945 -------- testhal/STM32F4xx/IRQ_STORM/main.c | 333 --- testhal/STM32F4xx/IRQ_STORM/mcuconf.h | 304 --- testhal/STM32F4xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F4xx/IRQ_STORM_FPU/.cproject | 52 - testhal/STM32F4xx/IRQ_STORM_FPU/.project | 38 - testhal/STM32F4xx/IRQ_STORM_FPU/Makefile | 203 -- testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h | 498 ----- testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c | 23 - testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h | 312 --- testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp | 2292 -------------------- testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww | 10 - testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf | 39 - testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj | 945 -------- testhal/STM32F4xx/IRQ_STORM_FPU/main.c | 304 --- testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h | 304 --- testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt | 30 - testhal/STM32F4xx/PWM-ICU/.cproject | 52 - testhal/STM32F4xx/PWM-ICU/.project | 38 - testhal/STM32F4xx/PWM-ICU/Makefile | 203 -- testhal/STM32F4xx/PWM-ICU/chconf.h | 498 ----- testhal/STM32F4xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F4xx/PWM-ICU/main.c | 140 -- testhal/STM32F4xx/PWM-ICU/mcuconf.h | 304 --- testhal/STM32F4xx/PWM-ICU/readme.txt | 30 - testhal/STM32F4xx/RTC/.cproject | 52 - testhal/STM32F4xx/RTC/.project | 38 - testhal/STM32F4xx/RTC/Makefile | 208 -- testhal/STM32F4xx/RTC/chconf.h | 498 ----- testhal/STM32F4xx/RTC/halconf.h | 319 --- testhal/STM32F4xx/RTC/main.c | 239 -- testhal/STM32F4xx/RTC/mcuconf.h | 304 --- testhal/STM32F4xx/SDC/.cproject | 51 - testhal/STM32F4xx/SDC/.project | 38 - testhal/STM32F4xx/SDC/Makefile | 205 -- testhal/STM32F4xx/SDC/chconf.h | 498 ----- testhal/STM32F4xx/SDC/halconf.h | 326 --- testhal/STM32F4xx/SDC/main.c | 223 -- testhal/STM32F4xx/SDC/mcuconf.h | 304 --- testhal/STM32F4xx/SDC/readme.txt | 26 - testhal/STM32F4xx/SPI/.cproject | 52 - testhal/STM32F4xx/SPI/.project | 38 - testhal/STM32F4xx/SPI/Makefile | 203 -- testhal/STM32F4xx/SPI/chconf.h | 498 ----- testhal/STM32F4xx/SPI/halconf.h | 312 --- testhal/STM32F4xx/SPI/main.c | 138 -- testhal/STM32F4xx/SPI/mcuconf.h | 304 --- testhal/STM32F4xx/SPI/readme.txt | 30 - testhal/STM32F4xx/UART/.cproject | 56 - testhal/STM32F4xx/UART/.project | 38 - testhal/STM32F4xx/UART/Makefile | 203 -- testhal/STM32F4xx/UART/chconf.h | 498 ----- testhal/STM32F4xx/UART/halconf.h | 312 --- testhal/STM32F4xx/UART/main.c | 160 -- testhal/STM32F4xx/UART/mcuconf.h | 304 --- testhal/STM32F4xx/UART/readme.txt | 31 - testhal/STM32F4xx/USB_CDC/.cproject | 51 - testhal/STM32F4xx/USB_CDC/.project | 38 - testhal/STM32F4xx/USB_CDC/Makefile | 205 -- testhal/STM32F4xx/USB_CDC/chconf.h | 498 ----- testhal/STM32F4xx/USB_CDC/halconf.h | 319 --- testhal/STM32F4xx/USB_CDC/main.c | 525 ----- testhal/STM32F4xx/USB_CDC/mcuconf.h | 304 --- testhal/STM32F4xx/USB_CDC/readme.txt | 26 - testhal/STM32L1xx/ADC/.cproject | 51 - testhal/STM32L1xx/ADC/.project | 33 - testhal/STM32L1xx/ADC/Makefile | 198 -- testhal/STM32L1xx/ADC/chconf.h | 498 ----- testhal/STM32L1xx/ADC/halconf.h | 312 --- testhal/STM32L1xx/ADC/main.c | 164 -- testhal/STM32L1xx/ADC/mcuconf.h | 177 -- testhal/STM32L1xx/ADC/readme.txt | 31 - testhal/STM32L1xx/EXT/.cproject | 51 - testhal/STM32L1xx/EXT/.project | 33 - testhal/STM32L1xx/EXT/Makefile | 198 -- testhal/STM32L1xx/EXT/chconf.h | 498 ----- testhal/STM32L1xx/EXT/halconf.h | 319 --- testhal/STM32L1xx/EXT/main.c | 98 - testhal/STM32L1xx/EXT/mcuconf.h | 171 -- testhal/STM32L1xx/EXT/readme.txt | 30 - testhal/STM32L1xx/IRQ_STORM/.cproject | 51 - testhal/STM32L1xx/IRQ_STORM/.project | 33 - testhal/STM32L1xx/IRQ_STORM/Makefile | 198 -- testhal/STM32L1xx/IRQ_STORM/chconf.h | 498 ----- testhal/STM32L1xx/IRQ_STORM/halconf.h | 319 --- testhal/STM32L1xx/IRQ_STORM/main.c | 335 --- testhal/STM32L1xx/IRQ_STORM/mcuconf.h | 177 -- testhal/STM32L1xx/IRQ_STORM/readme.txt | 31 - testhal/STM32L1xx/PWM-ICU/.cproject | 51 - testhal/STM32L1xx/PWM-ICU/.project | 33 - testhal/STM32L1xx/PWM-ICU/Makefile | 198 -- testhal/STM32L1xx/PWM-ICU/chconf.h | 498 ----- testhal/STM32L1xx/PWM-ICU/halconf.h | 319 --- testhal/STM32L1xx/PWM-ICU/main.c | 140 -- testhal/STM32L1xx/PWM-ICU/mcuconf.h | 177 -- testhal/STM32L1xx/PWM-ICU/readme.txt | 31 - testhal/STM32L1xx/SPI/.cproject | 51 - testhal/STM32L1xx/SPI/.project | 33 - testhal/STM32L1xx/SPI/Makefile | 198 -- testhal/STM32L1xx/SPI/chconf.h | 498 ----- testhal/STM32L1xx/SPI/halconf.h | 319 --- testhal/STM32L1xx/SPI/main.c | 139 -- testhal/STM32L1xx/SPI/mcuconf.h | 177 -- testhal/STM32L1xx/SPI/readme.txt | 31 - testhal/STM32L1xx/UART/.cproject | 51 - testhal/STM32L1xx/UART/.project | 33 - testhal/STM32L1xx/UART/Makefile | 198 -- testhal/STM32L1xx/UART/chconf.h | 498 ----- testhal/STM32L1xx/UART/halconf.h | 319 --- testhal/STM32L1xx/UART/main.c | 142 -- testhal/STM32L1xx/UART/mcuconf.h | 177 -- testhal/STM32L1xx/UART/readme.txt | 32 - 908 files changed, 94228 insertions(+), 94228 deletions(-) create mode 100644 testhal/STM32/STM32F0xx/ADC/.cproject create mode 100644 testhal/STM32/STM32F0xx/ADC/.project create mode 100644 testhal/STM32/STM32F0xx/ADC/Makefile create mode 100644 testhal/STM32/STM32F0xx/ADC/chconf.h create mode 100644 testhal/STM32/STM32F0xx/ADC/halconf.h create mode 100644 testhal/STM32/STM32F0xx/ADC/main.c create mode 100644 testhal/STM32/STM32F0xx/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/ADC/readme.txt create mode 100644 testhal/STM32/STM32F0xx/EXT/.cproject create mode 100644 testhal/STM32/STM32F0xx/EXT/.project create mode 100644 testhal/STM32/STM32F0xx/EXT/Makefile create mode 100644 testhal/STM32/STM32F0xx/EXT/chconf.h create mode 100644 testhal/STM32/STM32F0xx/EXT/halconf.h create mode 100644 testhal/STM32/STM32F0xx/EXT/main.c create mode 100644 testhal/STM32/STM32F0xx/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/EXT/readme.txt create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/.project create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32F0xx/SPI/.cproject create mode 100644 testhal/STM32/STM32F0xx/SPI/.project create mode 100644 testhal/STM32/STM32F0xx/SPI/Makefile create mode 100644 testhal/STM32/STM32F0xx/SPI/chconf.h create mode 100644 testhal/STM32/STM32F0xx/SPI/halconf.h create mode 100644 testhal/STM32/STM32F0xx/SPI/main.c create mode 100644 testhal/STM32/STM32F0xx/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/SPI/readme.txt create mode 100644 testhal/STM32/STM32F0xx/UART/.cproject create mode 100644 testhal/STM32/STM32F0xx/UART/.project create mode 100644 testhal/STM32/STM32F0xx/UART/Makefile create mode 100644 testhal/STM32/STM32F0xx/UART/chconf.h create mode 100644 testhal/STM32/STM32F0xx/UART/halconf.h create mode 100644 testhal/STM32/STM32F0xx/UART/main.c create mode 100644 testhal/STM32/STM32F0xx/UART/mcuconf.h create mode 100644 testhal/STM32/STM32F0xx/UART/readme.txt create mode 100644 testhal/STM32/STM32F1xx/ADC/.cproject create mode 100644 testhal/STM32/STM32F1xx/ADC/.project create mode 100644 testhal/STM32/STM32F1xx/ADC/Makefile create mode 100644 testhal/STM32/STM32F1xx/ADC/chconf.h create mode 100644 testhal/STM32/STM32F1xx/ADC/halconf.h create mode 100644 testhal/STM32/STM32F1xx/ADC/main.c create mode 100644 testhal/STM32/STM32F1xx/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/ADC/readme.txt create mode 100644 testhal/STM32/STM32F1xx/CAN/.cproject create mode 100644 testhal/STM32/STM32F1xx/CAN/.project create mode 100644 testhal/STM32/STM32F1xx/CAN/Makefile create mode 100644 testhal/STM32/STM32F1xx/CAN/chconf.h create mode 100644 testhal/STM32/STM32F1xx/CAN/halconf.h create mode 100644 testhal/STM32/STM32F1xx/CAN/main.c create mode 100644 testhal/STM32/STM32F1xx/CAN/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/CAN/readme.txt create mode 100644 testhal/STM32/STM32F1xx/EXT/.cproject create mode 100644 testhal/STM32/STM32F1xx/EXT/.project create mode 100644 testhal/STM32/STM32F1xx/EXT/Makefile create mode 100644 testhal/STM32/STM32F1xx/EXT/chconf.h create mode 100644 testhal/STM32/STM32F1xx/EXT/halconf.h create mode 100644 testhal/STM32/STM32F1xx/EXT/main.c create mode 100644 testhal/STM32/STM32F1xx/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/EXT/readme.txt create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/.project create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32F1xx/SPI/.cproject create mode 100644 testhal/STM32/STM32F1xx/SPI/.project create mode 100644 testhal/STM32/STM32F1xx/SPI/Makefile create mode 100644 testhal/STM32/STM32F1xx/SPI/chconf.h create mode 100644 testhal/STM32/STM32F1xx/SPI/halconf.h create mode 100644 testhal/STM32/STM32F1xx/SPI/main.c create mode 100644 testhal/STM32/STM32F1xx/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/SPI/readme.txt create mode 100644 testhal/STM32/STM32F1xx/UART/.cproject create mode 100644 testhal/STM32/STM32F1xx/UART/.project create mode 100644 testhal/STM32/STM32F1xx/UART/Makefile create mode 100644 testhal/STM32/STM32F1xx/UART/chconf.h create mode 100644 testhal/STM32/STM32F1xx/UART/halconf.h create mode 100644 testhal/STM32/STM32F1xx/UART/main.c create mode 100644 testhal/STM32/STM32F1xx/UART/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/UART/readme.txt create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/.cproject create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/.project create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/Makefile create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/chconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/halconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/main.c create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC/readme.txt create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/.cproject create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/.project create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/Makefile create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/chconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/halconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/main.c create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/USB_CDC_F107/readme.txt create mode 100644 testhal/STM32/STM32F30x/ADC/.cproject create mode 100644 testhal/STM32/STM32F30x/ADC/.project create mode 100644 testhal/STM32/STM32F30x/ADC/Makefile create mode 100644 testhal/STM32/STM32F30x/ADC/chconf.h create mode 100644 testhal/STM32/STM32F30x/ADC/halconf.h create mode 100644 testhal/STM32/STM32F30x/ADC/main.c create mode 100644 testhal/STM32/STM32F30x/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/ADC/readme.txt create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/.cproject create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/.project create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/Makefile create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/chconf.h create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/halconf.h create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/main.c create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/ADC_DUAL/readme.txt create mode 100644 testhal/STM32/STM32F30x/CAN/.cproject create mode 100644 testhal/STM32/STM32F30x/CAN/.project create mode 100644 testhal/STM32/STM32F30x/CAN/Makefile create mode 100644 testhal/STM32/STM32F30x/CAN/chconf.h create mode 100644 testhal/STM32/STM32F30x/CAN/halconf.h create mode 100644 testhal/STM32/STM32F30x/CAN/main.c create mode 100644 testhal/STM32/STM32F30x/CAN/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/CAN/readme.txt create mode 100644 testhal/STM32/STM32F30x/EXT/.cproject create mode 100644 testhal/STM32/STM32F30x/EXT/.project create mode 100644 testhal/STM32/STM32F30x/EXT/Makefile create mode 100644 testhal/STM32/STM32F30x/EXT/chconf.h create mode 100644 testhal/STM32/STM32F30x/EXT/halconf.h create mode 100644 testhal/STM32/STM32F30x/EXT/main.c create mode 100644 testhal/STM32/STM32F30x/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/EXT/readme.txt create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/.project create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32F30x/SPI/.cproject create mode 100644 testhal/STM32/STM32F30x/SPI/.project create mode 100644 testhal/STM32/STM32F30x/SPI/Makefile create mode 100644 testhal/STM32/STM32F30x/SPI/chconf.h create mode 100644 testhal/STM32/STM32F30x/SPI/halconf.h create mode 100644 testhal/STM32/STM32F30x/SPI/main.c create mode 100644 testhal/STM32/STM32F30x/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/SPI/readme.txt create mode 100644 testhal/STM32/STM32F30x/UART/.cproject create mode 100644 testhal/STM32/STM32F30x/UART/.project create mode 100644 testhal/STM32/STM32F30x/UART/Makefile create mode 100644 testhal/STM32/STM32F30x/UART/chconf.h create mode 100644 testhal/STM32/STM32F30x/UART/halconf.h create mode 100644 testhal/STM32/STM32F30x/UART/main.c create mode 100644 testhal/STM32/STM32F30x/UART/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/UART/readme.txt create mode 100644 testhal/STM32/STM32F30x/USB_CDC/.cproject create mode 100644 testhal/STM32/STM32F30x/USB_CDC/.project create mode 100644 testhal/STM32/STM32F30x/USB_CDC/Makefile create mode 100644 testhal/STM32/STM32F30x/USB_CDC/chconf.h create mode 100644 testhal/STM32/STM32F30x/USB_CDC/halconf.h create mode 100644 testhal/STM32/STM32F30x/USB_CDC/main.c create mode 100644 testhal/STM32/STM32F30x/USB_CDC/mcuconf.h create mode 100644 testhal/STM32/STM32F30x/USB_CDC/readme.txt create mode 100644 testhal/STM32/STM32F37x/ADC/.cproject create mode 100644 testhal/STM32/STM32F37x/ADC/.project create mode 100644 testhal/STM32/STM32F37x/ADC/Makefile create mode 100644 testhal/STM32/STM32F37x/ADC/chconf.h create mode 100644 testhal/STM32/STM32F37x/ADC/halconf.h create mode 100644 testhal/STM32/STM32F37x/ADC/main.c create mode 100644 testhal/STM32/STM32F37x/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/ADC/readme.txt create mode 100644 testhal/STM32/STM32F37x/CAN/.cproject create mode 100644 testhal/STM32/STM32F37x/CAN/.project create mode 100644 testhal/STM32/STM32F37x/CAN/Makefile create mode 100644 testhal/STM32/STM32F37x/CAN/chconf.h create mode 100644 testhal/STM32/STM32F37x/CAN/halconf.h create mode 100644 testhal/STM32/STM32F37x/CAN/main.c create mode 100644 testhal/STM32/STM32F37x/CAN/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/CAN/readme.txt create mode 100644 testhal/STM32/STM32F37x/EXT/.cproject create mode 100644 testhal/STM32/STM32F37x/EXT/.project create mode 100644 testhal/STM32/STM32F37x/EXT/Makefile create mode 100644 testhal/STM32/STM32F37x/EXT/chconf.h create mode 100644 testhal/STM32/STM32F37x/EXT/halconf.h create mode 100644 testhal/STM32/STM32F37x/EXT/main.c create mode 100644 testhal/STM32/STM32F37x/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/EXT/readme.txt create mode 100644 testhal/STM32/STM32F37x/I2C/.cproject create mode 100644 testhal/STM32/STM32F37x/I2C/.project create mode 100644 testhal/STM32/STM32F37x/I2C/Makefile create mode 100644 testhal/STM32/STM32F37x/I2C/chconf.h create mode 100644 testhal/STM32/STM32F37x/I2C/halconf.h create mode 100644 testhal/STM32/STM32F37x/I2C/main.c create mode 100644 testhal/STM32/STM32F37x/I2C/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/I2C/readme.txt create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/.project create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32F37x/SDADC/.cproject create mode 100644 testhal/STM32/STM32F37x/SDADC/.project create mode 100644 testhal/STM32/STM32F37x/SDADC/Makefile create mode 100644 testhal/STM32/STM32F37x/SDADC/chconf.h create mode 100644 testhal/STM32/STM32F37x/SDADC/halconf.h create mode 100644 testhal/STM32/STM32F37x/SDADC/main.c create mode 100644 testhal/STM32/STM32F37x/SDADC/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/SDADC/readme.txt create mode 100644 testhal/STM32/STM32F37x/SPI/.cproject create mode 100644 testhal/STM32/STM32F37x/SPI/.project create mode 100644 testhal/STM32/STM32F37x/SPI/Makefile create mode 100644 testhal/STM32/STM32F37x/SPI/chconf.h create mode 100644 testhal/STM32/STM32F37x/SPI/halconf.h create mode 100644 testhal/STM32/STM32F37x/SPI/main.c create mode 100644 testhal/STM32/STM32F37x/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/SPI/readme.txt create mode 100644 testhal/STM32/STM32F37x/UART/.cproject create mode 100644 testhal/STM32/STM32F37x/UART/.project create mode 100644 testhal/STM32/STM32F37x/UART/Makefile create mode 100644 testhal/STM32/STM32F37x/UART/chconf.h create mode 100644 testhal/STM32/STM32F37x/UART/halconf.h create mode 100644 testhal/STM32/STM32F37x/UART/main.c create mode 100644 testhal/STM32/STM32F37x/UART/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/UART/readme.txt create mode 100644 testhal/STM32/STM32F37x/USB_CDC/.cproject create mode 100644 testhal/STM32/STM32F37x/USB_CDC/.project create mode 100644 testhal/STM32/STM32F37x/USB_CDC/Makefile create mode 100644 testhal/STM32/STM32F37x/USB_CDC/chconf.h create mode 100644 testhal/STM32/STM32F37x/USB_CDC/halconf.h create mode 100644 testhal/STM32/STM32F37x/USB_CDC/main.c create mode 100644 testhal/STM32/STM32F37x/USB_CDC/mcuconf.h create mode 100644 testhal/STM32/STM32F37x/USB_CDC/readme.txt create mode 100644 testhal/STM32/STM32F4xx/ADC/.cproject create mode 100644 testhal/STM32/STM32F4xx/ADC/.project create mode 100644 testhal/STM32/STM32F4xx/ADC/Makefile create mode 100644 testhal/STM32/STM32F4xx/ADC/chconf.h create mode 100644 testhal/STM32/STM32F4xx/ADC/halconf.h create mode 100644 testhal/STM32/STM32F4xx/ADC/main.c create mode 100644 testhal/STM32/STM32F4xx/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/ADC/readme.txt create mode 100644 testhal/STM32/STM32F4xx/CAN/.cproject create mode 100644 testhal/STM32/STM32F4xx/CAN/.project create mode 100644 testhal/STM32/STM32F4xx/CAN/Makefile create mode 100644 testhal/STM32/STM32F4xx/CAN/chconf.h create mode 100644 testhal/STM32/STM32F4xx/CAN/halconf.h create mode 100644 testhal/STM32/STM32F4xx/CAN/main.c create mode 100644 testhal/STM32/STM32F4xx/CAN/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/CAN/readme.txt create mode 100644 testhal/STM32/STM32F4xx/DAC/.cproject create mode 100644 testhal/STM32/STM32F4xx/DAC/.project create mode 100644 testhal/STM32/STM32F4xx/DAC/Makefile create mode 100644 testhal/STM32/STM32F4xx/DAC/chconf.h create mode 100644 testhal/STM32/STM32F4xx/DAC/halconf.h create mode 100644 testhal/STM32/STM32F4xx/DAC/main.c create mode 100644 testhal/STM32/STM32F4xx/DAC/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/DAC/readme.txt create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/.cproject create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/.project create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/Makefile create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/chconf.h create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/halconf.h create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/main.c create mode 100644 testhal/STM32/STM32F4xx/DMA_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/EXT/.cproject create mode 100644 testhal/STM32/STM32F4xx/EXT/.project create mode 100644 testhal/STM32/STM32F4xx/EXT/Makefile create mode 100644 testhal/STM32/STM32F4xx/EXT/chconf.h create mode 100644 testhal/STM32/STM32F4xx/EXT/halconf.h create mode 100644 testhal/STM32/STM32F4xx/EXT/main.c create mode 100644 testhal/STM32/STM32F4xx/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/EXT/readme.txt create mode 100644 testhal/STM32/STM32F4xx/GPT/.cproject create mode 100644 testhal/STM32/STM32F4xx/GPT/.project create mode 100644 testhal/STM32/STM32F4xx/GPT/Makefile create mode 100644 testhal/STM32/STM32F4xx/GPT/chconf.h create mode 100644 testhal/STM32/STM32F4xx/GPT/halconf.h create mode 100644 testhal/STM32/STM32F4xx/GPT/main.c create mode 100644 testhal/STM32/STM32F4xx/GPT/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/GPT/readme.txt create mode 100644 testhal/STM32/STM32F4xx/I2C/.cproject create mode 100644 testhal/STM32/STM32F4xx/I2C/.project create mode 100644 testhal/STM32/STM32F4xx/I2C/Makefile create mode 100644 testhal/STM32/STM32F4xx/I2C/chconf.h create mode 100644 testhal/STM32/STM32F4xx/I2C/halconf.h create mode 100644 testhal/STM32/STM32F4xx/I2C/main.c create mode 100644 testhal/STM32/STM32F4xx/I2C/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/I2S/.cproject create mode 100644 testhal/STM32/STM32F4xx/I2S/.project create mode 100644 testhal/STM32/STM32F4xx/I2S/Makefile create mode 100644 testhal/STM32/STM32F4xx/I2S/chconf.h create mode 100644 testhal/STM32/STM32F4xx/I2S/halconf.h create mode 100644 testhal/STM32/STM32F4xx/I2S/main.c create mode 100644 testhal/STM32/STM32F4xx/I2S/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/I2S/readme.txt create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.ewp create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.eww create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.icf create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/keil/ch.uvproj create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.cproject create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.project create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/Makefile create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/chconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/extfunc.c create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/halconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/main.c create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/IRQ_STORM_FPU/readme.txt create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/.project create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32F4xx/RTC/.cproject create mode 100644 testhal/STM32/STM32F4xx/RTC/.project create mode 100644 testhal/STM32/STM32F4xx/RTC/Makefile create mode 100644 testhal/STM32/STM32F4xx/RTC/chconf.h create mode 100644 testhal/STM32/STM32F4xx/RTC/halconf.h create mode 100644 testhal/STM32/STM32F4xx/RTC/main.c create mode 100644 testhal/STM32/STM32F4xx/RTC/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/SDC/.cproject create mode 100644 testhal/STM32/STM32F4xx/SDC/.project create mode 100644 testhal/STM32/STM32F4xx/SDC/Makefile create mode 100644 testhal/STM32/STM32F4xx/SDC/chconf.h create mode 100644 testhal/STM32/STM32F4xx/SDC/halconf.h create mode 100644 testhal/STM32/STM32F4xx/SDC/main.c create mode 100644 testhal/STM32/STM32F4xx/SDC/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/SDC/readme.txt create mode 100644 testhal/STM32/STM32F4xx/SPI/.cproject create mode 100644 testhal/STM32/STM32F4xx/SPI/.project create mode 100644 testhal/STM32/STM32F4xx/SPI/Makefile create mode 100644 testhal/STM32/STM32F4xx/SPI/chconf.h create mode 100644 testhal/STM32/STM32F4xx/SPI/halconf.h create mode 100644 testhal/STM32/STM32F4xx/SPI/main.c create mode 100644 testhal/STM32/STM32F4xx/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/SPI/readme.txt create mode 100644 testhal/STM32/STM32F4xx/UART/.cproject create mode 100644 testhal/STM32/STM32F4xx/UART/.project create mode 100644 testhal/STM32/STM32F4xx/UART/Makefile create mode 100644 testhal/STM32/STM32F4xx/UART/chconf.h create mode 100644 testhal/STM32/STM32F4xx/UART/halconf.h create mode 100644 testhal/STM32/STM32F4xx/UART/main.c create mode 100644 testhal/STM32/STM32F4xx/UART/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/UART/readme.txt create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/.cproject create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/.project create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/Makefile create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/chconf.h create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/halconf.h create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/main.c create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/mcuconf.h create mode 100644 testhal/STM32/STM32F4xx/USB_CDC/readme.txt create mode 100644 testhal/STM32/STM32L1xx/ADC/.cproject create mode 100644 testhal/STM32/STM32L1xx/ADC/.project create mode 100644 testhal/STM32/STM32L1xx/ADC/Makefile create mode 100644 testhal/STM32/STM32L1xx/ADC/chconf.h create mode 100644 testhal/STM32/STM32L1xx/ADC/halconf.h create mode 100644 testhal/STM32/STM32L1xx/ADC/main.c create mode 100644 testhal/STM32/STM32L1xx/ADC/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/ADC/readme.txt create mode 100644 testhal/STM32/STM32L1xx/EXT/.cproject create mode 100644 testhal/STM32/STM32L1xx/EXT/.project create mode 100644 testhal/STM32/STM32L1xx/EXT/Makefile create mode 100644 testhal/STM32/STM32L1xx/EXT/chconf.h create mode 100644 testhal/STM32/STM32L1xx/EXT/halconf.h create mode 100644 testhal/STM32/STM32L1xx/EXT/main.c create mode 100644 testhal/STM32/STM32L1xx/EXT/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/EXT/readme.txt create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/.cproject create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/.project create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/Makefile create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/main.c create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/.cproject create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/.project create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/Makefile create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/chconf.h create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/halconf.h create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/main.c create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/PWM-ICU/readme.txt create mode 100644 testhal/STM32/STM32L1xx/SPI/.cproject create mode 100644 testhal/STM32/STM32L1xx/SPI/.project create mode 100644 testhal/STM32/STM32L1xx/SPI/Makefile create mode 100644 testhal/STM32/STM32L1xx/SPI/chconf.h create mode 100644 testhal/STM32/STM32L1xx/SPI/halconf.h create mode 100644 testhal/STM32/STM32L1xx/SPI/main.c create mode 100644 testhal/STM32/STM32L1xx/SPI/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/SPI/readme.txt create mode 100644 testhal/STM32/STM32L1xx/UART/.cproject create mode 100644 testhal/STM32/STM32L1xx/UART/.project create mode 100644 testhal/STM32/STM32L1xx/UART/Makefile create mode 100644 testhal/STM32/STM32L1xx/UART/chconf.h create mode 100644 testhal/STM32/STM32L1xx/UART/halconf.h create mode 100644 testhal/STM32/STM32L1xx/UART/main.c create mode 100644 testhal/STM32/STM32L1xx/UART/mcuconf.h create mode 100644 testhal/STM32/STM32L1xx/UART/readme.txt delete mode 100644 testhal/STM32F0xx/ADC/.cproject delete mode 100644 testhal/STM32F0xx/ADC/.project delete mode 100644 testhal/STM32F0xx/ADC/Makefile delete mode 100644 testhal/STM32F0xx/ADC/chconf.h delete mode 100644 testhal/STM32F0xx/ADC/halconf.h delete mode 100644 testhal/STM32F0xx/ADC/main.c delete mode 100644 testhal/STM32F0xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F0xx/ADC/readme.txt delete mode 100644 testhal/STM32F0xx/EXT/.cproject delete mode 100644 testhal/STM32F0xx/EXT/.project delete mode 100644 testhal/STM32F0xx/EXT/Makefile delete mode 100644 testhal/STM32F0xx/EXT/chconf.h delete mode 100644 testhal/STM32F0xx/EXT/halconf.h delete mode 100644 testhal/STM32F0xx/EXT/main.c delete mode 100644 testhal/STM32F0xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F0xx/EXT/readme.txt delete mode 100644 testhal/STM32F0xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F0xx/IRQ_STORM/.project delete mode 100644 testhal/STM32F0xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F0xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F0xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F0xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32F0xx/PWM-ICU/.project delete mode 100644 testhal/STM32F0xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F0xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F0xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F0xx/SPI/.cproject delete mode 100644 testhal/STM32F0xx/SPI/.project delete mode 100644 testhal/STM32F0xx/SPI/Makefile delete mode 100644 testhal/STM32F0xx/SPI/chconf.h delete mode 100644 testhal/STM32F0xx/SPI/halconf.h delete mode 100644 testhal/STM32F0xx/SPI/main.c delete mode 100644 testhal/STM32F0xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F0xx/SPI/readme.txt delete mode 100644 testhal/STM32F0xx/UART/.cproject delete mode 100644 testhal/STM32F0xx/UART/.project delete mode 100644 testhal/STM32F0xx/UART/Makefile delete mode 100644 testhal/STM32F0xx/UART/chconf.h delete mode 100644 testhal/STM32F0xx/UART/halconf.h delete mode 100644 testhal/STM32F0xx/UART/main.c delete mode 100644 testhal/STM32F0xx/UART/mcuconf.h delete mode 100644 testhal/STM32F0xx/UART/readme.txt delete mode 100644 testhal/STM32F1xx/ADC/.cproject delete mode 100644 testhal/STM32F1xx/ADC/.project delete mode 100644 testhal/STM32F1xx/ADC/Makefile delete mode 100644 testhal/STM32F1xx/ADC/chconf.h delete mode 100644 testhal/STM32F1xx/ADC/halconf.h delete mode 100644 testhal/STM32F1xx/ADC/main.c delete mode 100644 testhal/STM32F1xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F1xx/ADC/readme.txt delete mode 100644 testhal/STM32F1xx/CAN/.cproject delete mode 100644 testhal/STM32F1xx/CAN/.project delete mode 100644 testhal/STM32F1xx/CAN/Makefile delete mode 100644 testhal/STM32F1xx/CAN/chconf.h delete mode 100644 testhal/STM32F1xx/CAN/halconf.h delete mode 100644 testhal/STM32F1xx/CAN/main.c delete mode 100644 testhal/STM32F1xx/CAN/mcuconf.h delete mode 100644 testhal/STM32F1xx/CAN/readme.txt delete mode 100644 testhal/STM32F1xx/EXT/.cproject delete mode 100644 testhal/STM32F1xx/EXT/.project delete mode 100644 testhal/STM32F1xx/EXT/Makefile delete mode 100644 testhal/STM32F1xx/EXT/chconf.h delete mode 100644 testhal/STM32F1xx/EXT/halconf.h delete mode 100644 testhal/STM32F1xx/EXT/main.c delete mode 100644 testhal/STM32F1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F1xx/EXT/readme.txt delete mode 100644 testhal/STM32F1xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F1xx/IRQ_STORM/.project delete mode 100644 testhal/STM32F1xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F1xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F1xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F1xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32F1xx/PWM-ICU/.project delete mode 100644 testhal/STM32F1xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F1xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F1xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F1xx/SPI/.cproject delete mode 100644 testhal/STM32F1xx/SPI/.project delete mode 100644 testhal/STM32F1xx/SPI/Makefile delete mode 100644 testhal/STM32F1xx/SPI/chconf.h delete mode 100644 testhal/STM32F1xx/SPI/halconf.h delete mode 100644 testhal/STM32F1xx/SPI/main.c delete mode 100644 testhal/STM32F1xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F1xx/SPI/readme.txt delete mode 100644 testhal/STM32F1xx/UART/.cproject delete mode 100644 testhal/STM32F1xx/UART/.project delete mode 100644 testhal/STM32F1xx/UART/Makefile delete mode 100644 testhal/STM32F1xx/UART/chconf.h delete mode 100644 testhal/STM32F1xx/UART/halconf.h delete mode 100644 testhal/STM32F1xx/UART/main.c delete mode 100644 testhal/STM32F1xx/UART/mcuconf.h delete mode 100644 testhal/STM32F1xx/UART/readme.txt delete mode 100644 testhal/STM32F1xx/USB_CDC/.cproject delete mode 100644 testhal/STM32F1xx/USB_CDC/.project delete mode 100644 testhal/STM32F1xx/USB_CDC/Makefile delete mode 100644 testhal/STM32F1xx/USB_CDC/chconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/halconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/main.c delete mode 100644 testhal/STM32F1xx/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/readme.txt delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/.cproject delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/.project delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/Makefile delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/chconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/halconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/main.c delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/mcuconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/readme.txt delete mode 100644 testhal/STM32F30x/ADC/.cproject delete mode 100644 testhal/STM32F30x/ADC/.project delete mode 100644 testhal/STM32F30x/ADC/Makefile delete mode 100644 testhal/STM32F30x/ADC/chconf.h delete mode 100644 testhal/STM32F30x/ADC/halconf.h delete mode 100644 testhal/STM32F30x/ADC/main.c delete mode 100644 testhal/STM32F30x/ADC/mcuconf.h delete mode 100644 testhal/STM32F30x/ADC/readme.txt delete mode 100644 testhal/STM32F30x/ADC_DUAL/.cproject delete mode 100644 testhal/STM32F30x/ADC_DUAL/.project delete mode 100644 testhal/STM32F30x/ADC_DUAL/Makefile delete mode 100644 testhal/STM32F30x/ADC_DUAL/chconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/halconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/main.c delete mode 100644 testhal/STM32F30x/ADC_DUAL/mcuconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/readme.txt delete mode 100644 testhal/STM32F30x/CAN/.cproject delete mode 100644 testhal/STM32F30x/CAN/.project delete mode 100644 testhal/STM32F30x/CAN/Makefile delete mode 100644 testhal/STM32F30x/CAN/chconf.h delete mode 100644 testhal/STM32F30x/CAN/halconf.h delete mode 100644 testhal/STM32F30x/CAN/main.c delete mode 100644 testhal/STM32F30x/CAN/mcuconf.h delete mode 100644 testhal/STM32F30x/CAN/readme.txt delete mode 100644 testhal/STM32F30x/EXT/.cproject delete mode 100644 testhal/STM32F30x/EXT/.project delete mode 100644 testhal/STM32F30x/EXT/Makefile delete mode 100644 testhal/STM32F30x/EXT/chconf.h delete mode 100644 testhal/STM32F30x/EXT/halconf.h delete mode 100644 testhal/STM32F30x/EXT/main.c delete mode 100644 testhal/STM32F30x/EXT/mcuconf.h delete mode 100644 testhal/STM32F30x/EXT/readme.txt delete mode 100644 testhal/STM32F30x/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F30x/IRQ_STORM/.project delete mode 100644 testhal/STM32F30x/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F30x/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/main.c delete mode 100644 testhal/STM32F30x/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F30x/PWM-ICU/.cproject delete mode 100644 testhal/STM32F30x/PWM-ICU/.project delete mode 100644 testhal/STM32F30x/PWM-ICU/Makefile delete mode 100644 testhal/STM32F30x/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/main.c delete mode 100644 testhal/STM32F30x/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F30x/SPI/.cproject delete mode 100644 testhal/STM32F30x/SPI/.project delete mode 100644 testhal/STM32F30x/SPI/Makefile delete mode 100644 testhal/STM32F30x/SPI/chconf.h delete mode 100644 testhal/STM32F30x/SPI/halconf.h delete mode 100644 testhal/STM32F30x/SPI/main.c delete mode 100644 testhal/STM32F30x/SPI/mcuconf.h delete mode 100644 testhal/STM32F30x/SPI/readme.txt delete mode 100644 testhal/STM32F30x/UART/.cproject delete mode 100644 testhal/STM32F30x/UART/.project delete mode 100644 testhal/STM32F30x/UART/Makefile delete mode 100644 testhal/STM32F30x/UART/chconf.h delete mode 100644 testhal/STM32F30x/UART/halconf.h delete mode 100644 testhal/STM32F30x/UART/main.c delete mode 100644 testhal/STM32F30x/UART/mcuconf.h delete mode 100644 testhal/STM32F30x/UART/readme.txt delete mode 100644 testhal/STM32F30x/USB_CDC/.cproject delete mode 100644 testhal/STM32F30x/USB_CDC/.project delete mode 100644 testhal/STM32F30x/USB_CDC/Makefile delete mode 100644 testhal/STM32F30x/USB_CDC/chconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/halconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/main.c delete mode 100644 testhal/STM32F30x/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/readme.txt delete mode 100644 testhal/STM32F37x/ADC/.cproject delete mode 100644 testhal/STM32F37x/ADC/.project delete mode 100644 testhal/STM32F37x/ADC/Makefile delete mode 100644 testhal/STM32F37x/ADC/chconf.h delete mode 100644 testhal/STM32F37x/ADC/halconf.h delete mode 100644 testhal/STM32F37x/ADC/main.c delete mode 100644 testhal/STM32F37x/ADC/mcuconf.h delete mode 100644 testhal/STM32F37x/ADC/readme.txt delete mode 100644 testhal/STM32F37x/CAN/.cproject delete mode 100644 testhal/STM32F37x/CAN/.project delete mode 100644 testhal/STM32F37x/CAN/Makefile delete mode 100644 testhal/STM32F37x/CAN/chconf.h delete mode 100644 testhal/STM32F37x/CAN/halconf.h delete mode 100644 testhal/STM32F37x/CAN/main.c delete mode 100644 testhal/STM32F37x/CAN/mcuconf.h delete mode 100644 testhal/STM32F37x/CAN/readme.txt delete mode 100644 testhal/STM32F37x/EXT/.cproject delete mode 100644 testhal/STM32F37x/EXT/.project delete mode 100644 testhal/STM32F37x/EXT/Makefile delete mode 100644 testhal/STM32F37x/EXT/chconf.h delete mode 100644 testhal/STM32F37x/EXT/halconf.h delete mode 100644 testhal/STM32F37x/EXT/main.c delete mode 100644 testhal/STM32F37x/EXT/mcuconf.h delete mode 100644 testhal/STM32F37x/EXT/readme.txt delete mode 100644 testhal/STM32F37x/I2C/.cproject delete mode 100644 testhal/STM32F37x/I2C/.project delete mode 100644 testhal/STM32F37x/I2C/Makefile delete mode 100644 testhal/STM32F37x/I2C/chconf.h delete mode 100644 testhal/STM32F37x/I2C/halconf.h delete mode 100644 testhal/STM32F37x/I2C/main.c delete mode 100644 testhal/STM32F37x/I2C/mcuconf.h delete mode 100644 testhal/STM32F37x/I2C/readme.txt delete mode 100644 testhal/STM32F37x/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F37x/IRQ_STORM/.project delete mode 100644 testhal/STM32F37x/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F37x/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/main.c delete mode 100644 testhal/STM32F37x/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F37x/PWM-ICU/.cproject delete mode 100644 testhal/STM32F37x/PWM-ICU/.project delete mode 100644 testhal/STM32F37x/PWM-ICU/Makefile delete mode 100644 testhal/STM32F37x/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/main.c delete mode 100644 testhal/STM32F37x/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F37x/SDADC/.cproject delete mode 100644 testhal/STM32F37x/SDADC/.project delete mode 100644 testhal/STM32F37x/SDADC/Makefile delete mode 100644 testhal/STM32F37x/SDADC/chconf.h delete mode 100644 testhal/STM32F37x/SDADC/halconf.h delete mode 100644 testhal/STM32F37x/SDADC/main.c delete mode 100644 testhal/STM32F37x/SDADC/mcuconf.h delete mode 100644 testhal/STM32F37x/SDADC/readme.txt delete mode 100644 testhal/STM32F37x/SPI/.cproject delete mode 100644 testhal/STM32F37x/SPI/.project delete mode 100644 testhal/STM32F37x/SPI/Makefile delete mode 100644 testhal/STM32F37x/SPI/chconf.h delete mode 100644 testhal/STM32F37x/SPI/halconf.h delete mode 100644 testhal/STM32F37x/SPI/main.c delete mode 100644 testhal/STM32F37x/SPI/mcuconf.h delete mode 100644 testhal/STM32F37x/SPI/readme.txt delete mode 100644 testhal/STM32F37x/UART/.cproject delete mode 100644 testhal/STM32F37x/UART/.project delete mode 100644 testhal/STM32F37x/UART/Makefile delete mode 100644 testhal/STM32F37x/UART/chconf.h delete mode 100644 testhal/STM32F37x/UART/halconf.h delete mode 100644 testhal/STM32F37x/UART/main.c delete mode 100644 testhal/STM32F37x/UART/mcuconf.h delete mode 100644 testhal/STM32F37x/UART/readme.txt delete mode 100644 testhal/STM32F37x/USB_CDC/.cproject delete mode 100644 testhal/STM32F37x/USB_CDC/.project delete mode 100644 testhal/STM32F37x/USB_CDC/Makefile delete mode 100644 testhal/STM32F37x/USB_CDC/chconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/halconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/main.c delete mode 100644 testhal/STM32F37x/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/readme.txt delete mode 100644 testhal/STM32F4xx/ADC/.cproject delete mode 100644 testhal/STM32F4xx/ADC/.project delete mode 100644 testhal/STM32F4xx/ADC/Makefile delete mode 100644 testhal/STM32F4xx/ADC/chconf.h delete mode 100644 testhal/STM32F4xx/ADC/halconf.h delete mode 100644 testhal/STM32F4xx/ADC/main.c delete mode 100644 testhal/STM32F4xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F4xx/ADC/readme.txt delete mode 100644 testhal/STM32F4xx/CAN/.cproject delete mode 100644 testhal/STM32F4xx/CAN/.project delete mode 100644 testhal/STM32F4xx/CAN/Makefile delete mode 100644 testhal/STM32F4xx/CAN/chconf.h delete mode 100644 testhal/STM32F4xx/CAN/halconf.h delete mode 100644 testhal/STM32F4xx/CAN/main.c delete mode 100644 testhal/STM32F4xx/CAN/mcuconf.h delete mode 100644 testhal/STM32F4xx/CAN/readme.txt delete mode 100644 testhal/STM32F4xx/DAC/.cproject delete mode 100644 testhal/STM32F4xx/DAC/.project delete mode 100644 testhal/STM32F4xx/DAC/Makefile delete mode 100644 testhal/STM32F4xx/DAC/chconf.h delete mode 100644 testhal/STM32F4xx/DAC/halconf.h delete mode 100644 testhal/STM32F4xx/DAC/main.c delete mode 100644 testhal/STM32F4xx/DAC/mcuconf.h delete mode 100644 testhal/STM32F4xx/DAC/readme.txt delete mode 100644 testhal/STM32F4xx/DMA_STORM/.cproject delete mode 100644 testhal/STM32F4xx/DMA_STORM/.project delete mode 100644 testhal/STM32F4xx/DMA_STORM/Makefile delete mode 100644 testhal/STM32F4xx/DMA_STORM/chconf.h delete mode 100644 testhal/STM32F4xx/DMA_STORM/halconf.h delete mode 100644 testhal/STM32F4xx/DMA_STORM/main.c delete mode 100644 testhal/STM32F4xx/DMA_STORM/mcuconf.h delete mode 100644 testhal/STM32F4xx/EXT/.cproject delete mode 100644 testhal/STM32F4xx/EXT/.project delete mode 100644 testhal/STM32F4xx/EXT/Makefile delete mode 100644 testhal/STM32F4xx/EXT/chconf.h delete mode 100644 testhal/STM32F4xx/EXT/halconf.h delete mode 100644 testhal/STM32F4xx/EXT/main.c delete mode 100644 testhal/STM32F4xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F4xx/EXT/readme.txt delete mode 100644 testhal/STM32F4xx/GPT/.cproject delete mode 100644 testhal/STM32F4xx/GPT/.project delete mode 100644 testhal/STM32F4xx/GPT/Makefile delete mode 100644 testhal/STM32F4xx/GPT/chconf.h delete mode 100644 testhal/STM32F4xx/GPT/halconf.h delete mode 100644 testhal/STM32F4xx/GPT/main.c delete mode 100644 testhal/STM32F4xx/GPT/mcuconf.h delete mode 100644 testhal/STM32F4xx/GPT/readme.txt delete mode 100644 testhal/STM32F4xx/I2C/.cproject delete mode 100644 testhal/STM32F4xx/I2C/.project delete mode 100644 testhal/STM32F4xx/I2C/Makefile delete mode 100644 testhal/STM32F4xx/I2C/chconf.h delete mode 100644 testhal/STM32F4xx/I2C/halconf.h delete mode 100644 testhal/STM32F4xx/I2C/main.c delete mode 100644 testhal/STM32F4xx/I2C/mcuconf.h delete mode 100644 testhal/STM32F4xx/I2S/.cproject delete mode 100644 testhal/STM32F4xx/I2S/.project delete mode 100644 testhal/STM32F4xx/I2S/Makefile delete mode 100644 testhal/STM32F4xx/I2S/chconf.h delete mode 100644 testhal/STM32F4xx/I2S/halconf.h delete mode 100644 testhal/STM32F4xx/I2S/main.c delete mode 100644 testhal/STM32F4xx/I2S/mcuconf.h delete mode 100644 testhal/STM32F4xx/I2S/readme.txt delete mode 100644 testhal/STM32F4xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F4xx/IRQ_STORM/.project delete mode 100644 testhal/STM32F4xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F4xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.eww delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.icf delete mode 100644 testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj delete mode 100644 testhal/STM32F4xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/.cproject delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/.project delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/Makefile delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/main.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt delete mode 100644 testhal/STM32F4xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32F4xx/PWM-ICU/.project delete mode 100644 testhal/STM32F4xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F4xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F4xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F4xx/RTC/.cproject delete mode 100644 testhal/STM32F4xx/RTC/.project delete mode 100644 testhal/STM32F4xx/RTC/Makefile delete mode 100644 testhal/STM32F4xx/RTC/chconf.h delete mode 100644 testhal/STM32F4xx/RTC/halconf.h delete mode 100644 testhal/STM32F4xx/RTC/main.c delete mode 100644 testhal/STM32F4xx/RTC/mcuconf.h delete mode 100644 testhal/STM32F4xx/SDC/.cproject delete mode 100644 testhal/STM32F4xx/SDC/.project delete mode 100644 testhal/STM32F4xx/SDC/Makefile delete mode 100644 testhal/STM32F4xx/SDC/chconf.h delete mode 100644 testhal/STM32F4xx/SDC/halconf.h delete mode 100644 testhal/STM32F4xx/SDC/main.c delete mode 100644 testhal/STM32F4xx/SDC/mcuconf.h delete mode 100644 testhal/STM32F4xx/SDC/readme.txt delete mode 100644 testhal/STM32F4xx/SPI/.cproject delete mode 100644 testhal/STM32F4xx/SPI/.project delete mode 100644 testhal/STM32F4xx/SPI/Makefile delete mode 100644 testhal/STM32F4xx/SPI/chconf.h delete mode 100644 testhal/STM32F4xx/SPI/halconf.h delete mode 100644 testhal/STM32F4xx/SPI/main.c delete mode 100644 testhal/STM32F4xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F4xx/SPI/readme.txt delete mode 100644 testhal/STM32F4xx/UART/.cproject delete mode 100644 testhal/STM32F4xx/UART/.project delete mode 100644 testhal/STM32F4xx/UART/Makefile delete mode 100644 testhal/STM32F4xx/UART/chconf.h delete mode 100644 testhal/STM32F4xx/UART/halconf.h delete mode 100644 testhal/STM32F4xx/UART/main.c delete mode 100644 testhal/STM32F4xx/UART/mcuconf.h delete mode 100644 testhal/STM32F4xx/UART/readme.txt delete mode 100644 testhal/STM32F4xx/USB_CDC/.cproject delete mode 100644 testhal/STM32F4xx/USB_CDC/.project delete mode 100644 testhal/STM32F4xx/USB_CDC/Makefile delete mode 100644 testhal/STM32F4xx/USB_CDC/chconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/halconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/main.c delete mode 100644 testhal/STM32F4xx/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/readme.txt delete mode 100644 testhal/STM32L1xx/ADC/.cproject delete mode 100644 testhal/STM32L1xx/ADC/.project delete mode 100644 testhal/STM32L1xx/ADC/Makefile delete mode 100644 testhal/STM32L1xx/ADC/chconf.h delete mode 100644 testhal/STM32L1xx/ADC/halconf.h delete mode 100644 testhal/STM32L1xx/ADC/main.c delete mode 100644 testhal/STM32L1xx/ADC/mcuconf.h delete mode 100644 testhal/STM32L1xx/ADC/readme.txt delete mode 100644 testhal/STM32L1xx/EXT/.cproject delete mode 100644 testhal/STM32L1xx/EXT/.project delete mode 100644 testhal/STM32L1xx/EXT/Makefile delete mode 100644 testhal/STM32L1xx/EXT/chconf.h delete mode 100644 testhal/STM32L1xx/EXT/halconf.h delete mode 100644 testhal/STM32L1xx/EXT/main.c delete mode 100644 testhal/STM32L1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32L1xx/EXT/readme.txt delete mode 100644 testhal/STM32L1xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32L1xx/IRQ_STORM/.project delete mode 100644 testhal/STM32L1xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32L1xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32L1xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32L1xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32L1xx/PWM-ICU/.project delete mode 100644 testhal/STM32L1xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32L1xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/main.c delete mode 100644 testhal/STM32L1xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32L1xx/SPI/.cproject delete mode 100644 testhal/STM32L1xx/SPI/.project delete mode 100644 testhal/STM32L1xx/SPI/Makefile delete mode 100644 testhal/STM32L1xx/SPI/chconf.h delete mode 100644 testhal/STM32L1xx/SPI/halconf.h delete mode 100644 testhal/STM32L1xx/SPI/main.c delete mode 100644 testhal/STM32L1xx/SPI/mcuconf.h delete mode 100644 testhal/STM32L1xx/SPI/readme.txt delete mode 100644 testhal/STM32L1xx/UART/.cproject delete mode 100644 testhal/STM32L1xx/UART/.project delete mode 100644 testhal/STM32L1xx/UART/Makefile delete mode 100644 testhal/STM32L1xx/UART/chconf.h delete mode 100644 testhal/STM32L1xx/UART/halconf.h delete mode 100644 testhal/STM32L1xx/UART/main.c delete mode 100644 testhal/STM32L1xx/UART/mcuconf.h delete mode 100644 testhal/STM32L1xx/UART/readme.txt diff --git a/testhal/STM32/STM32F0xx/ADC/.cproject b/testhal/STM32/STM32F0xx/ADC/.cproject new file mode 100644 index 000000000..6398488ab --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/ADC/.project b/testhal/STM32/STM32F0xx/ADC/.project new file mode 100644 index 000000000..7c94c96a4 --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/ADC/Makefile b/testhal/STM32/STM32F0xx/ADC/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/ADC/chconf.h b/testhal/STM32/STM32F0xx/ADC/chconf.h new file mode 100644 index 000000000..89abbc2dc --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/ADC/halconf.h b/testhal/STM32/STM32F0xx/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/ADC/main.c b/testhal/STM32/STM32F0xx/ADC/main.c new file mode 100644 index 000000000..86eb71780 --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/main.c @@ -0,0 +1,152 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 1 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 4 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + * Channels: IN10. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + ADC_CFGR1_RES_12BIT, /* CFGRR1 */ + ADC_TR(0, 0), /* TR */ + ADC_SMPR_SMP_1P5, /* SMPR */ + ADC_CHSELR_CHSEL10 /* CHSELR */ +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN10, IN11, Sensor, VRef. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + ADC_CFGR1_RES_12BIT, /* CFGRR1 */ + ADC_TR(0, 0), /* TR */ + ADC_SMPR_SMP_28P5, /* SMPR */ + ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL11 | + ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17 /* CHSELR */ +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOC, GPIOC_LED4); + chThdSleepMilliseconds(500); + palClearPad(GPIOC, GPIOC_LED4); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + adcSTM32SetCCR(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + adcStopConversion(&ADCD1); + adcSTM32SetCCR(0); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F0xx/ADC/mcuconf.h b/testhal/STM32/STM32F0xx/ADC/mcuconf.h new file mode 100644 index 000000000..652af90a1 --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/ADC/readme.txt b/testhal/STM32/STM32F0xx/ADC/readme.txt new file mode 100644 index 000000000..704ffb1a6 --- /dev/null +++ b/testhal/STM32/STM32F0xx/ADC/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx ADC driver. + +** Board Setup ** + +- Remove the LCD module. +- Connect PC0 to 3.3V and PC1 to GND for analog measurements. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F0xx/EXT/.cproject b/testhal/STM32/STM32F0xx/EXT/.cproject new file mode 100644 index 000000000..ad1273b16 --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/EXT/.project b/testhal/STM32/STM32F0xx/EXT/.project new file mode 100644 index 000000000..bae993cd8 --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/EXT/Makefile b/testhal/STM32/STM32F0xx/EXT/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/EXT/chconf.h b/testhal/STM32/STM32F0xx/EXT/chconf.h new file mode 100644 index 000000000..0e7bac72f --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/EXT/halconf.h b/testhal/STM32/STM32F0xx/EXT/halconf.h new file mode 100644 index 000000000..5b67db37b --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/EXT/main.c b/testhal/STM32/STM32F0xx/EXT/main.c new file mode 100644 index 000000000..2fdcc247e --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/main.c @@ -0,0 +1,98 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void led4off(void *arg) { + + (void)arg; + palClearPad(GPIOC, GPIOC_LED4); +} + +/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + static virtual_timer_t vt4; + + (void)extp; + (void)channel; + palSetPad(GPIOC, GPIOC_LED4); + chSysLockFromISR(); + chVTResetI(&vt4); + /* LED4 set to OFF after 200mS.*/ + chVTSetI(&vt4, MS2ST(200), led4off, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32F0xx/EXT/mcuconf.h b/testhal/STM32/STM32F0xx/EXT/mcuconf.h new file mode 100644 index 000000000..df3f85580 --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/EXT/readme.txt b/testhal/STM32/STM32F0xx/EXT/readme.txt new file mode 100644 index 000000000..542fc577e --- /dev/null +++ b/testhal/STM32/STM32F0xx/EXT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx EXT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/.cproject b/testhal/STM32/STM32F0xx/IRQ_STORM/.cproject new file mode 100644 index 000000000..8c3040aad --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/.project b/testhal/STM32/STM32F0xx/IRQ_STORM/.project new file mode 100644 index 000000000..8c63b9bf4 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/chconf.h b/testhal/STM32/STM32F0xx/IRQ_STORM/chconf.h new file mode 100644 index 000000000..1b81d6805 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/halconf.h b/testhal/STM32/STM32F0xx/IRQ_STORM/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/main.c b/testhal/STM32/STM32F0xx/IRQ_STORM/main.c new file mode 100644 index 000000000..22baf6e62 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/main.c @@ -0,0 +1,332 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOC, GPIOC_LED4); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt2cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt2cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt2cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } + chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD1, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD1, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Prepares the Serial driver 1 and GPT drivers 2 and 3. + */ + sdStart(&SD1, NULL); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ + gptStart(&GPTD1, &gpt2cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 20; interval -= interval / 10) { + gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD1); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD1); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } + return 0; +} diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F0xx/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..2a9c91850 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 TRUE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 1 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 3 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/readme.txt b/testhal/STM32/STM32F0xx/IRQ_STORM/readme.txt new file mode 100644 index 000000000..e56547a46 --- /dev/null +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/.cproject b/testhal/STM32/STM32F0xx/PWM-ICU/.cproject new file mode 100644 index 000000000..e2fc31de7 --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/.project b/testhal/STM32/STM32F0xx/PWM-ICU/.project new file mode 100644 index 000000000..021a42109 --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/Makefile b/testhal/STM32/STM32F0xx/PWM-ICU/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/chconf.h b/testhal/STM32/STM32F0xx/PWM-ICU/chconf.h new file mode 100644 index 000000000..0e7bac72f --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/halconf.h b/testhal/STM32/STM32F0xx/PWM-ICU/halconf.h new file mode 100644 index 000000000..c1a492c2d --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/main.c b/testhal/STM32/STM32F0xx/PWM-ICU/main.c new file mode 100644 index 000000000..fa4c4de8c --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/main.c @@ -0,0 +1,145 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(GPIOC, GPIOC_LED4); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(GPIOC, GPIOC_LED4); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0 +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + palSetPad(GPIOC, GPIOC_LED3); + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + palClearPad(GPIOC, GPIOC_LED3); + last_period = icuGetPeriod(icup); +} + +static void icuoverflowcb(ICUDriver *icup) { + + (void)icup; +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_HIGH, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + icuoverflowcb, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the PWM driver 2 and ICU driver 3. + * GPIOA6 is the ICU input (CH1). + * GPIOA8 is the PWM output (CH1). + * The two pins have to be externally connected together. + */ + pwmStart(&PWMD1, &pwmcfg); + palSetPadMode(GPIOA, 8, PAL_MODE_ALTERNATE(2)); + icuStart(&ICUD3, &icucfg); + palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); + icuEnable(&ICUD3); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD1, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD1, 0); + pwmStop(&PWMD1); + icuDisable(&ICUD3); + icuStop(&ICUD3); + palClearPad(GPIOC, GPIOC_LED3); + palClearPad(GPIOC, GPIOC_LED4); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F0xx/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..b4678a1f6 --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 TRUE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/readme.txt b/testhal/STM32/STM32F0xx/PWM-ICU/readme.txt new file mode 100644 index 000000000..a0c549b3b --- /dev/null +++ b/testhal/STM32/STM32F0xx/PWM-ICU/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx PWM-ICU drivers. + +** Board Setup ** + +- Connect PA8 and PA6 together. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F0xx/SPI/.cproject b/testhal/STM32/STM32F0xx/SPI/.cproject new file mode 100644 index 000000000..dd317e872 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/SPI/.project b/testhal/STM32/STM32F0xx/SPI/.project new file mode 100644 index 000000000..1e19b44f3 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/SPI/Makefile b/testhal/STM32/STM32F0xx/SPI/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/SPI/chconf.h b/testhal/STM32/STM32F0xx/SPI/chconf.h new file mode 100644 index 000000000..0e7bac72f --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/SPI/halconf.h b/testhal/STM32/STM32F0xx/SPI/halconf.h new file mode 100644 index 000000000..99f546dd1 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/SPI/main.c b/testhal/STM32/STM32F0xx/SPI/main.c new file mode 100644 index 000000000..5c0226b94 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/main.c @@ -0,0 +1,162 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 12, + 0, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOB, + 12, + SPI_CR1_BR_2 | SPI_CR1_BR_1, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static msg_t spi_thread_1(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palSetPad(GPIOC, GPIOC_LED4); /* LED ON. */ + spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static msg_t spi_thread_2(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palClearPad(GPIOC, GPIOC_LED4); /* LED OFF. */ + spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} +/* + * This is a periodic thread that does absolutely nothing except flashing + * a LED. + */ +static THD_WORKING_AREA(blinker_wa, 128); +static msg_t blinker(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOC, GPIOC_LED3); + chThdSleepMilliseconds(500); + palClearPad(GPIOC, GPIOC_LED3); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI2 I/O pins setup. + */ + palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(0) | + PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ + palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(0) | + PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ + palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(0) | + PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ + palSetPad(GPIOB, 12); + palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | + PAL_STM32_OSPEED_HIGHEST); /* New CS. */ + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Starting the blinker thread. + */ + chThdCreateStatic(blinker_wa, sizeof(blinker_wa), + NORMALPRIO-1, blinker, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F0xx/SPI/mcuconf.h b/testhal/STM32/STM32F0xx/SPI/mcuconf.h new file mode 100644 index 000000000..33146eb6a --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/SPI/readme.txt b/testhal/STM32/STM32F0xx/SPI/readme.txt new file mode 100644 index 000000000..636a7c248 --- /dev/null +++ b/testhal/STM32/STM32F0xx/SPI/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx SPI driver. + +** Board Setup ** + +- Connect PB14 and PB15 together for SPI loop-back. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F0xx/UART/.cproject b/testhal/STM32/STM32F0xx/UART/.cproject new file mode 100644 index 000000000..46c45aefc --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F0xx/UART/.project b/testhal/STM32/STM32F0xx/UART/.project new file mode 100644 index 000000000..03d8ce7d4 --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/.project @@ -0,0 +1,38 @@ + + + STM32F0xx-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F0xx/UART/Makefile b/testhal/STM32/STM32F0xx/UART/Makefile new file mode 100644 index 000000000..ab318e781 --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F051x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/UART/chconf.h b/testhal/STM32/STM32F0xx/UART/chconf.h new file mode 100644 index 000000000..0e7bac72f --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/UART/halconf.h b/testhal/STM32/STM32F0xx/UART/halconf.h new file mode 100644 index 000000000..e9b103442 --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F0xx/UART/main.c b/testhal/STM32/STM32F0xx/UART/main.c new file mode 100644 index 000000000..9df75bb9d --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/main.c @@ -0,0 +1,142 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palClearPad(GPIOC, GPIOC_LED4); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOC, GPIOC_LED4); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palClearPad(GPIOC, GPIOC_LED4); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTSetI(&vt1, MS2ST(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetPad(GPIOC, GPIOC_LED4); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTSetI(&vt2, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART1. + */ + uartStart(&UARTD1, &uart_cfg_1); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD1, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F0xx/UART/mcuconf.h b/testhal/STM32/STM32F0xx/UART/mcuconf.h new file mode 100644 index 000000000..1fd22d532 --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32/STM32F0xx/UART/readme.txt b/testhal/STM32/STM32F0xx/UART/readme.txt new file mode 100644 index 000000000..921f1bc8e --- /dev/null +++ b/testhal/STM32/STM32F0xx/UART/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32F0xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F0-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F0xx UART driver. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/ADC/.cproject b/testhal/STM32/STM32F1xx/ADC/.cproject new file mode 100644 index 000000000..96718979f --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/ADC/.project b/testhal/STM32/STM32F1xx/ADC/.project new file mode 100644 index 000000000..b0614142a --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/ADC/Makefile b/testhal/STM32/STM32F1xx/ADC/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/ADC/chconf.h b/testhal/STM32/STM32F1xx/ADC/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/ADC/halconf.h b/testhal/STM32/STM32F1xx/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/ADC/main.c b/testhal/STM32/STM32F1xx/ADC/main.c new file mode 100644 index 000000000..3fcbafbfc --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/main.c @@ -0,0 +1,158 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 1 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + * Channels: IN10. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0, 0, /* CR1, CR2 */ + ADC_SMPR1_SMP_AN10(ADC_SAMPLE_1P5), + 0, /* SMPR2 */ + ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), + 0, /* SQR2 */ + ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, ADC_CR2_TSVREFE, /* CR1, CR2 */ + ADC_SMPR1_SMP_AN11(ADC_SAMPLE_41P5) | ADC_SMPR1_SMP_AN10(ADC_SAMPLE_41P5) | + ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), + 0, /* SMPR2 */ + ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), + ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), + ADC_SQR3_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN10) | + ADC_SQR3_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN10) | + ADC_SQR3_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + palClearPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(500); + palSetPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) + adcStopConversion(&ADCD1); + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F1xx/ADC/mcuconf.h b/testhal/STM32/STM32F1xx/ADC/mcuconf.h new file mode 100644 index 000000000..8ca927071 --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/ADC/readme.txt b/testhal/STM32/STM32F1xx/ADC/readme.txt new file mode 100644 index 000000000..1502425f4 --- /dev/null +++ b/testhal/STM32/STM32F1xx/ADC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 ADC driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/CAN/.cproject b/testhal/STM32/STM32F1xx/CAN/.cproject new file mode 100644 index 000000000..bac08e768 --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/CAN/.project b/testhal/STM32/STM32F1xx/CAN/.project new file mode 100644 index 000000000..bd246b63d --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-CAN + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/CAN/Makefile b/testhal/STM32/STM32F1xx/CAN/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/CAN/chconf.h b/testhal/STM32/STM32F1xx/CAN/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/CAN/halconf.h b/testhal/STM32/STM32F1xx/CAN/halconf.h new file mode 100644 index 000000000..a1195d7e1 --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/CAN/main.c b/testhal/STM32/STM32F1xx/CAN/main.c new file mode 100644 index 000000000..39fdc29ae --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/main.c @@ -0,0 +1,111 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover + * from abort mode. + * See section 22.7.7 on the STM32 reference manual. + */ +static const CANConfig cancfg = { + CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, + CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | + CAN_BTR_TS1(8) | CAN_BTR_BRP(6) +}; + +/* + * Receiver thread. + */ +static THD_WORKING_AREA(can_rx_wa, 256); +static THD_FUNCTION(can_rx, p) { + event_listener_t el; + CANRxFrame rxmsg; + + (void)p; + chRegSetThreadName("receiver"); + chEvtRegister(&CAND1.rxfull_event, &el, 0); + while(!chThdShouldTerminateX()) { + if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + continue; + while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { + /* Process message.*/ + palTogglePad(IOPORT3, GPIOC_LED); + } + } + chEvtUnregister(&CAND1.rxfull_event, &el); + return 0; +} + +/* + * Transmitter thread. + */ +static THD_WORKING_AREA(can_tx_wa, 256); +static THD_FUNCTION(can_tx, p) { + CANTxFrame txmsg; + + (void)p; + chRegSetThreadName("transmitter"); + txmsg.IDE = CAN_IDE_EXT; + txmsg.EID = 0x01234567; + txmsg.RTR = CAN_RTR_DATA; + txmsg.DLC = 8; + txmsg.data32[0] = 0x55AA55AA; + txmsg.data32[1] = 0x00FF00FF; + + while (!chThdShouldTerminateX()) { + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the CAN driver 1. + */ + canStart(&CAND1, &cancfg); + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); + chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); + + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F1xx/CAN/mcuconf.h b/testhal/STM32/STM32F1xx/CAN/mcuconf.h new file mode 100644 index 000000000..39cf40780 --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/CAN/readme.txt b/testhal/STM32/STM32F1xx/CAN/readme.txt new file mode 100644 index 000000000..b78112885 --- /dev/null +++ b/testhal/STM32/STM32F1xx/CAN/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - CAN driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 CAN driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/EXT/.cproject b/testhal/STM32/STM32F1xx/EXT/.cproject new file mode 100644 index 000000000..5afcfb4ad --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/EXT/.project b/testhal/STM32/STM32F1xx/EXT/.project new file mode 100644 index 000000000..41d3deffa --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/EXT/Makefile b/testhal/STM32/STM32F1xx/EXT/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/EXT/chconf.h b/testhal/STM32/STM32F1xx/EXT/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/EXT/halconf.h b/testhal/STM32/STM32F1xx/EXT/halconf.h new file mode 100644 index 000000000..5b67db37b --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/EXT/main.c b/testhal/STM32/STM32F1xx/EXT/main.c new file mode 100644 index 000000000..1ca4260d0 --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/main.c @@ -0,0 +1,98 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt; + +/* LED set to OFF after 200mS.*/ +static void ledoff(void *arg) { + + (void)arg; + palSetPad(GPIOC, GPIOC_LED); +} + +/* Triggered when the button is pressed or released. The LED is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + + (void)extp; + (void)channel; + palClearPad(GPIOC, GPIOC_LED); + chSysLockFromISR(); + chVTSetI(&vt, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* Triggered when the LED goes OFF.*/ +static void extcb2(EXTDriver *extp, expchannel_t channel) { + + (void)extp; + (void)channel; +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb2}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32F1xx/EXT/mcuconf.h b/testhal/STM32/STM32F1xx/EXT/mcuconf.h new file mode 100644 index 000000000..b261fb50d --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/EXT/readme.txt b/testhal/STM32/STM32F1xx/EXT/readme.txt new file mode 100644 index 000000000..48288c565 --- /dev/null +++ b/testhal/STM32/STM32F1xx/EXT/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 EXT driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/.cproject b/testhal/STM32/STM32F1xx/IRQ_STORM/.cproject new file mode 100644 index 000000000..34b2612a8 --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/.project b/testhal/STM32/STM32F1xx/IRQ_STORM/.project new file mode 100644 index 000000000..8a26197ea --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/chconf.h b/testhal/STM32/STM32F1xx/IRQ_STORM/chconf.h new file mode 100644 index 000000000..a1efc5bbf --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/halconf.h b/testhal/STM32/STM32F1xx/IRQ_STORM/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/main.c b/testhal/STM32/STM32F1xx/IRQ_STORM/main.c new file mode 100644 index 000000000..51806a45b --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/main.c @@ -0,0 +1,333 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOC, GPIOC_LED); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } + chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD2, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD2, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 2. + */ + sdStart(&SD2, NULL); + + /* + * Activates GPTs. + */ + gptStart(&GPTD4, &gpt4cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 10; interval -= interval / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..ae5c645da --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 6 +#define STM32_GPT_TIM4_IRQ_PRIORITY 10 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/readme.txt b/testhal/STM32/STM32F1xx/IRQ_STORM/readme.txt new file mode 100644 index 000000000..32f5a3781 --- /dev/null +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ-STORM demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32F1xx GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/.cproject b/testhal/STM32/STM32F1xx/PWM-ICU/.cproject new file mode 100644 index 000000000..b98eb835e --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/.project b/testhal/STM32/STM32F1xx/PWM-ICU/.project new file mode 100644 index 000000000..dc64cb828 --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/Makefile b/testhal/STM32/STM32F1xx/PWM-ICU/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/chconf.h b/testhal/STM32/STM32F1xx/PWM-ICU/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/halconf.h b/testhal/STM32/STM32F1xx/PWM-ICU/halconf.h new file mode 100644 index 000000000..c1a492c2d --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/main.c b/testhal/STM32/STM32F1xx/PWM-ICU/main.c new file mode 100644 index 000000000..eecd5b2ad --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/main.c @@ -0,0 +1,141 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(IOPORT3, GPIOC_LED); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(IOPORT3, GPIOC_LED); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0, +#if STM32_PWM_USE_ADVANCED + 0 +#endif +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + last_period = icuGetPeriod(icup); +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_HIGH, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + NULL, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * LED initially off. + */ + palSetPad(IOPORT3, GPIOC_LED); + + /* + * Initializes the PWM driver 1 and ICU driver 4. + */ + pwmStart(&PWMD1, &pwmcfg); + palSetPadMode(IOPORT1, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL); + icuStart(&ICUD4, &icucfg); + icuEnable(&ICUD4); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD1, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD1, 0); + pwmStop(&PWMD1); + icuDisable(&ICUD4); + icuStop(&ICUD4); + palSetPad(IOPORT3, GPIOC_LED); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..f0963d15c --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 TRUE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED TRUE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/readme.txt b/testhal/STM32/STM32F1xx/PWM-ICU/readme.txt new file mode 100644 index 000000000..55ffef2cf --- /dev/null +++ b/testhal/STM32/STM32F1xx/PWM-ICU/readme.txt @@ -0,0 +1,28 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM/ICU driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 PWM and ICU drivers. Pins +PA8 and PB6 must be connected in order to trigger the ICU input with the +PWM output. The ICU unit will measure the generated PWM. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/SPI/.cproject b/testhal/STM32/STM32F1xx/SPI/.cproject new file mode 100644 index 000000000..09884e9c6 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/SPI/.project b/testhal/STM32/STM32F1xx/SPI/.project new file mode 100644 index 000000000..427a9f4a5 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/SPI/Makefile b/testhal/STM32/STM32F1xx/SPI/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/SPI/chconf.h b/testhal/STM32/STM32F1xx/SPI/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/SPI/halconf.h b/testhal/STM32/STM32F1xx/SPI/halconf.h new file mode 100644 index 000000000..5782fe449 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/halconf.h @@ -0,0 +1,311 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/SPI/main.c b/testhal/STM32/STM32F1xx/SPI/main.c new file mode 100644 index 000000000..674d5d284 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/main.c @@ -0,0 +1,136 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOA, + GPIOA_SPI1NSS, + 0 +}; + +/* + * Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOA, + GPIOA_SPI1NSS, + SPI_CR1_BR_2 | SPI_CR1_BR_1 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static THD_FUNCTION(spi_thread_1, p) { + + (void)p; + + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ + palClearPad(IOPORT3, GPIOC_LED); /* LED ON. */ + spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID1); /* Slave Select assertion. */ + spiExchange(&SPID1, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID1); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID1); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static THD_FUNCTION(spi_thread_2, p) { + + (void)p; + + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ + palSetPad(IOPORT3, GPIOC_LED); /* LED OFF. */ + spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID1); /* Slave Select assertion. */ + spiExchange(&SPID1, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID1); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID1); /* Ownership release. */ + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI1 I/O pins setup. + */ + palSetPadMode(IOPORT1, 5, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* SCK. */ + palSetPadMode(IOPORT1, 6, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MISO.*/ + palSetPadMode(IOPORT1, 7, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MOSI.*/ + palSetPadMode(IOPORT1, GPIOA_SPI1NSS, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(IOPORT1, GPIOA_SPI1NSS); + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F1xx/SPI/mcuconf.h b/testhal/STM32/STM32F1xx/SPI/mcuconf.h new file mode 100644 index 000000000..5de132afa --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/SPI/readme.txt b/testhal/STM32/STM32F1xx/SPI/readme.txt new file mode 100644 index 000000000..1a9c90b47 --- /dev/null +++ b/testhal/STM32/STM32F1xx/SPI/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 SPI driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/UART/.cproject b/testhal/STM32/STM32F1xx/UART/.cproject new file mode 100644 index 000000000..f3228a9e5 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/UART/.project b/testhal/STM32/STM32F1xx/UART/.project new file mode 100644 index 000000000..dae6d5690 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/UART/Makefile b/testhal/STM32/STM32F1xx/UART/Makefile new file mode 100644 index 000000000..59c540dfd --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/UART/chconf.h b/testhal/STM32/STM32F1xx/UART/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/UART/halconf.h b/testhal/STM32/STM32F1xx/UART/halconf.h new file mode 100644 index 000000000..e9b103442 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/UART/main.c b/testhal/STM32/STM32F1xx/UART/main.c new file mode 100644 index 000000000..526125df2 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/main.c @@ -0,0 +1,145 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + + palSetPad(IOPORT3, GPIOC_LED); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + + palClearPad(IOPORT3, GPIOC_LED); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + + palSetPad(IOPORT3, GPIOC_LED); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + + /* Flashing the LED each time a character is received.*/ + palClearPad(IOPORT3, GPIOC_LED); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 2 using the driver default configuration. + */ + uartStart(&UARTD2, &uart_cfg_1); + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD2, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F1xx/UART/mcuconf.h b/testhal/STM32/STM32F1xx/UART/mcuconf.h new file mode 100644 index 000000000..10c0684ee --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 TRUE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/UART/readme.txt b/testhal/STM32/STM32F1xx/UART/readme.txt new file mode 100644 index 000000000..e24a2c568 --- /dev/null +++ b/testhal/STM32/STM32F1xx/UART/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 UART driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/USB_CDC/.cproject b/testhal/STM32/STM32F1xx/USB_CDC/.cproject new file mode 100644 index 000000000..e949fc6a0 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/USB_CDC/.project b/testhal/STM32/STM32F1xx/USB_CDC/.project new file mode 100644 index 000000000..cf2fef72d --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/.project @@ -0,0 +1,38 @@ + + + STM32F1xx-USB_CDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/testhal/STM32/STM32F1xx/USB_CDC/Makefile b/testhal/STM32/STM32F1xx/USB_CDC/Makefile new file mode 100644 index 000000000..1f9924734 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/USB_CDC/chconf.h b/testhal/STM32/STM32F1xx/USB_CDC/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/USB_CDC/halconf.h b/testhal/STM32/STM32F1xx/USB_CDC/halconf.h new file mode 100644 index 000000000..09a9a0cdb --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/USB_CDC/main.c b/testhal/STM32/STM32F1xx/USB_CDC/main.c new file mode 100644 index 000000000..38dc09260 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/main.c @@ -0,0 +1,509 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU1; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 1, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) +#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {CH_STATE_NAMES}; + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state]); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(time); + palSetPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + thread_t *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h b/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h new file mode 100644 index 000000000..3d82f8d46 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h @@ -0,0 +1,199 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/USB_CDC/readme.txt b/testhal/STM32/STM32F1xx/USB_CDC/readme.txt new file mode 100644 index 000000000..2d71df64f --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +The application demonstrates the use of the STM32 USB driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/.cproject b/testhal/STM32/STM32F1xx/USB_CDC_F107/.cproject new file mode 100644 index 000000000..e5f35ee12 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/.cproject @@ -0,0 +1,50 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/.project b/testhal/STM32/STM32F1xx/USB_CDC_F107/.project new file mode 100644 index 000000000..cdd1937af --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/.project @@ -0,0 +1,95 @@ + + + TEST-STM32F1xx-USB_CDC_F107 + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/boards/OLIMEX_STM32_P107 + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/Makefile b/testhal/STM32/STM32F1xx/USB_CDC_F107/Makefile new file mode 100644 index 000000000..8edd271fb --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/Makefile @@ -0,0 +1,209 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Enable this if you really want to use the STM FWLib. +ifeq ($(USE_FWLIB),) + USE_FWLIB = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk +include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform_f105_f107.mk +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk +include $(CHIBIOS)/os/kernel/kernel.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F107xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of default section +# + +# List all default C defines here, like -D_DEBUG=1 +DDEFS = + +# List all default ASM defines here, like -D_DEBUG=1 +DADEFS = + +# List all default directories to look for include files here +DINCDIR = + +# List the default directory to look for the libraries here +DLIBDIR = + +# List all default libraries here +DLIBS = + +# +# End of default section +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +ifeq ($(USE_FWLIB),yes) + include $(CHIBIOS)/ext/stm32lib/stm32lib.mk + CSRC += $(STM32SRC) + INCDIR += $(STM32INC) + USE_OPT += -DUSE_STDPERIPH_DRIVER +endif + +include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/chconf.h b/testhal/STM32/STM32F1xx/USB_CDC_F107/chconf.h new file mode 100644 index 000000000..2e6fcc6ee --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/chconf.h @@ -0,0 +1,531 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) +#define CH_FREQUENCY 1000 +#endif + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + */ +#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) +#define CH_TIME_QUANTUM 20 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_USE_MEMCORE. + */ +#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) +#define CH_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread automatically. The application has + * then the responsibility to do one of the following: + * - Spawn a custom idle thread at priority @p IDLEPRIO. + * - Change the main() thread priority to @p IDLEPRIO then enter + * an endless loop. In this scenario the @p main() thread acts as + * the idle thread. + * . + * @note Unless an idle thread is spawned the @p main() thread must not + * enter a sleep state. + */ +#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) +#define CH_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) +#define CH_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) +#define CH_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) +#define CH_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Atomic semaphore API. + * @details If enabled then the semaphores the @p chSemSignalWait() API + * is included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) +#define CH_USE_SEMSW TRUE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) +#define CH_USE_MUTEXES TRUE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES. + */ +#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_CONDVARS. + */ +#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) +#define CH_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_EVENTS. + */ +#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_MESSAGES. + */ +#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) +#define CH_USE_MAILBOXES TRUE +#endif + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) +#define CH_USE_QUEUES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) +#define CH_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or + * @p CH_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) +#define CH_USE_HEAP TRUE +#endif + +/** + * @brief C-runtime allocator. + * @details If enabled the the heap allocator APIs just wrap the C-runtime + * @p malloc() and @p free() functions. + * + * @note The default is @p FALSE. + * @note Requires @p CH_USE_HEAP. + * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the + * appropriate documentation. + */ +#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) +#define CH_USE_MALLOC_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) +#define CH_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_WAITEXIT. + * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. + */ +#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) +#define CH_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_TRACE TRUE +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) +#define CH_DBG_FILL_THREADS TRUE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p Thread structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p TRUE. + * @note This debug option is defaulted to TRUE because it is required by + * some test cases into the test suite. + */ +#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) +#define CH_DBG_THREADS_PROFILING TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p Thread structure. + */ +#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) +#define THREAD_EXT_FIELDS \ + /* Add threads custom fields here.*/ +#endif + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} +#endif + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} +#endif + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) +#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} +#endif + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) +#define IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} +#endif + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_TICK_EVENT_HOOK() { \ + /* System tick event code here.*/ \ +} +#endif + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_HALT_HOOK() { \ + /* System halt code here.*/ \ +} +#endif + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/halconf.h b/testhal/STM32/STM32F1xx/USB_CDC_F107/halconf.h new file mode 100644 index 000000000..bb8ebc123 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/main.c b/testhal/STM32/STM32F1xx/USB_CDC_F107/main.c new file mode 100644 index 000000000..8dda559c0 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/main.c @@ -0,0 +1,509 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU1; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 1, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromIsr(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromIsr(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WA_SIZE(2048) +#define TEST_WA_SIZE THD_WA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {THD_STATE_NAMES}; + Thread *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state time\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state], (uint32_t)tp->p_time); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + Thread *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(IOPORT3, GPIOC_LED_STATUS1); + chThdSleepMilliseconds(time); + palSetPad(IOPORT3, GPIOC_LED_STATUS1); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + Thread *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1000); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminated(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h b/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h new file mode 100644 index 000000000..5b6ba6683 --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h @@ -0,0 +1,207 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F107 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F107_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_PREDIV1 +#define STM32_PREDIV1SRC STM32_PREDIV1SRC_PLL2 +#define STM32_PREDIV1_VALUE 5 +#define STM32_PLLMUL_VALUE 9 +#define STM32_PREDIV2_VALUE 5 +#define STM32_PLL2MUL_VALUE 8 +#define STM32_PLL3MUL_VALUE 10 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_OTG_CLOCK_REQUIRED TRUE +#define STM32_OTGFSPRE STM32_OTGFSPRE_DIV3 +#define STM32_I2S_CLOCK_REQUIRED FALSE +#define STM32_MCOSEL STM32_MCOSEL_PLL3 +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() +#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/readme.txt b/testhal/STM32/STM32F1xx/USB_CDC_F107/readme.txt new file mode 100644 index 000000000..43098d8ac --- /dev/null +++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P107 board. + +** The Demo ** + +The application demonstrates the use of the STM32 USB (OTG) driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/ADC/.cproject b/testhal/STM32/STM32F30x/ADC/.cproject new file mode 100644 index 000000000..7a8791dfc --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/ADC/.project b/testhal/STM32/STM32F30x/ADC/.project new file mode 100644 index 000000000..9503708ca --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/.project @@ -0,0 +1,90 @@ + + + STM32F30x-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/ADC/Makefile b/testhal/STM32/STM32F30x/ADC/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/ADC/chconf.h b/testhal/STM32/STM32F30x/ADC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/ADC/halconf.h b/testhal/STM32/STM32F30x/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/ADC/main.c b/testhal/STM32/STM32F30x/ADC/main.c new file mode 100644 index 000000000..9306b14d1 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/main.c @@ -0,0 +1,172 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 2 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. + * Channels: IN7, IN8. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0, /* CFGR */ + ADC_TR(0, 4095), /* TR1 */ + 0, /* CCR */ + { /* SMPR[2] */ + 0, + 0 + }, + { /* SQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), + 0, + 0, + 0 + } +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, /* CFGR */ + ADC_TR(0, 4095), /* TR1 */ + ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ + { /* SMPR[2] */ + ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) + | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), + ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) + | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), + }, + { /* SQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | + ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), + ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | + ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), + 0, + 0 + } +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOE, GPIOE_LED10_RED); + chThdSleepMilliseconds(500); + palClearPad(GPIOE, GPIOE_LED10_RED); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + adcStopConversion(&ADCD1); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F30x/ADC/mcuconf.h b/testhal/STM32/STM32F30x/ADC/mcuconf.h new file mode 100644 index 000000000..7838058a0 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/ADC/readme.txt b/testhal/STM32/STM32F30x/ADC/readme.txt new file mode 100644 index 000000000..bc0a30424 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x ADC driver. + +** Board Setup ** + +- Connect PC1 to 3.3V and PC2 to GND for analog measurements. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/.cproject b/testhal/STM32/STM32F30x/ADC_DUAL/.cproject new file mode 100644 index 000000000..980f2e991 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/.project b/testhal/STM32/STM32F30x/ADC_DUAL/.project new file mode 100644 index 000000000..86fadf546 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/.project @@ -0,0 +1,90 @@ + + + STM32F30x-ADC_DUAL + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/Makefile b/testhal/STM32/STM32F30x/ADC_DUAL/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/chconf.h b/testhal/STM32/STM32F30x/ADC_DUAL/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/halconf.h b/testhal/STM32/STM32F30x/ADC_DUAL/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/main.c b/testhal/STM32/STM32F30x/ADC_DUAL/main.c new file mode 100644 index 000000000..849207de0 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/main.c @@ -0,0 +1,196 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 4 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 16 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. + * Channels: IN7, IN8. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0, /* CFGR */ + ADC_TR(0, 4095), /* TR1 */ + ADC_CCR_DUAL(1), /* CCR */ + { /* SMPR[2] */ + 0, + 0 + }, + { /* SQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), + 0, + 0, + 0 + }, + { /* SSMPR[2] */ + 0, + 0 + }, + { /* SSQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7), + 0, + 0, + 0 + } +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, /* CFGR */ + ADC_TR(0, 4095), /* TR1 */ + ADC_CCR_DUAL(1) | ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ + { /* SMPR[2] */ + ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) + | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), + ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) + | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), + }, + { /* SQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | + ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), + ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | + ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), + 0, + 0 + }, + { /* SSMPR[2] */ + ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) + | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), + ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) + | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), + }, + { /* SSQR[4] */ + ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7) | + ADC_SQR1_SQ3_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN7), + ADC_SQR2_SQ5_N(ADC_CHANNEL_IN8) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN7) | + ADC_SQR2_SQ7_N(ADC_CHANNEL_IN17) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN16), + 0, + 0 + } +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOE, GPIOE_LED10_RED); + chThdSleepMilliseconds(500); + palClearPad(GPIOE, GPIOE_LED10_RED); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + adcStopConversion(&ADCD1); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/mcuconf.h b/testhal/STM32/STM32F30x/ADC_DUAL/mcuconf.h new file mode 100644 index 000000000..3468f7e92 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE TRUE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/ADC_DUAL/readme.txt b/testhal/STM32/STM32F30x/ADC_DUAL/readme.txt new file mode 100644 index 000000000..bc0a30424 --- /dev/null +++ b/testhal/STM32/STM32F30x/ADC_DUAL/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x ADC driver. + +** Board Setup ** + +- Connect PC1 to 3.3V and PC2 to GND for analog measurements. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/CAN/.cproject b/testhal/STM32/STM32F30x/CAN/.cproject new file mode 100644 index 000000000..e18f952ce --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/CAN/.project b/testhal/STM32/STM32F30x/CAN/.project new file mode 100644 index 000000000..03f4bead6 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/.project @@ -0,0 +1,90 @@ + + + STM32F30x-CAN + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j1 + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/CAN/Makefile b/testhal/STM32/STM32F30x/CAN/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/CAN/chconf.h b/testhal/STM32/STM32F30x/CAN/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/CAN/halconf.h b/testhal/STM32/STM32F30x/CAN/halconf.h new file mode 100644 index 000000000..a1195d7e1 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/CAN/main.c b/testhal/STM32/STM32F30x/CAN/main.c new file mode 100644 index 000000000..27ba16bf7 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/main.c @@ -0,0 +1,109 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover + * from abort mode. + */ +static const CANConfig cancfg = { + CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, + CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | + CAN_BTR_TS1(8) | CAN_BTR_BRP(6) +}; + +/* + * Receiver thread. + */ +static THD_WORKING_AREA(can_rx_wa, 256); +static msg_t can_rx(void *p) { + event_listener_t el; + CANRxFrame rxmsg; + + (void)p; + chRegSetThreadName("receiver"); + chEvtRegister(&CAND1.rxfull_event, &el, 0); + while(!chThdShouldTerminateX()) { + if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + continue; + while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { + /* Process message.*/ + palTogglePad(GPIOE, GPIOE_LED3_RED); + } + } + chEvtUnregister(&CAND1.rxfull_event, &el); + return 0; +} + +/* + * Transmitter thread. + */ +static THD_WORKING_AREA(can_tx_wa, 256); +static msg_t can_tx(void * p) { + CANTxFrame txmsg; + + (void)p; + chRegSetThreadName("transmitter"); + txmsg.IDE = CAN_IDE_EXT; + txmsg.EID = 0x01234567; + txmsg.RTR = CAN_RTR_DATA; + txmsg.DLC = 8; + txmsg.data32[0] = 0x55AA55AA; + txmsg.data32[1] = 0x00FF00FF; + + while (!chThdShouldTerminateX()) { + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the CAN driver 1. + */ + canStart(&CAND1, &cancfg); + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); + chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F30x/CAN/mcuconf.h b/testhal/STM32/STM32F30x/CAN/mcuconf.h new file mode 100644 index 000000000..86e830fe2 --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/CAN/readme.txt b/testhal/STM32/STM32F30x/CAN/readme.txt new file mode 100644 index 000000000..983b34d1d --- /dev/null +++ b/testhal/STM32/STM32F30x/CAN/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - CAN driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x CAN driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/EXT/.cproject b/testhal/STM32/STM32F30x/EXT/.cproject new file mode 100644 index 000000000..c9c383d84 --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/EXT/.project b/testhal/STM32/STM32F30x/EXT/.project new file mode 100644 index 000000000..1504226d3 --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/.project @@ -0,0 +1,90 @@ + + + STM32F30x-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/EXT/Makefile b/testhal/STM32/STM32F30x/EXT/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/EXT/chconf.h b/testhal/STM32/STM32F30x/EXT/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/EXT/halconf.h b/testhal/STM32/STM32F30x/EXT/halconf.h new file mode 100644 index 000000000..5b67db37b --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/EXT/main.c b/testhal/STM32/STM32F30x/EXT/main.c new file mode 100644 index 000000000..bd8b4359c --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/main.c @@ -0,0 +1,102 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void led5off(void *arg) { + + (void)arg; + palClearPad(GPIOE, GPIOE_LED10_RED); +} + +/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + static virtual_timer_t vt4; + + (void)extp; + (void)channel; + + palSetPad(GPIOE, GPIOE_LED10_RED); + chSysLockFromISR(); + + /* Timer reset, if still active.*/ + chVTResetI(&vt4); + + /* LED4 set to OFF after 200mS.*/ + chVTSetI(&vt4, MS2ST(200), led5off, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32F30x/EXT/mcuconf.h b/testhal/STM32/STM32F30x/EXT/mcuconf.h new file mode 100644 index 000000000..abb99ae10 --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/EXT/readme.txt b/testhal/STM32/STM32F30x/EXT/readme.txt new file mode 100644 index 000000000..39255526b --- /dev/null +++ b/testhal/STM32/STM32F30x/EXT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x EXT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/.cproject b/testhal/STM32/STM32F30x/IRQ_STORM/.cproject new file mode 100644 index 000000000..e59cf38b3 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/.project b/testhal/STM32/STM32F30x/IRQ_STORM/.project new file mode 100644 index 000000000..c3e2f6a31 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/.project @@ -0,0 +1,38 @@ + + + STM32F30x-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/Makefile b/testhal/STM32/STM32F30x/IRQ_STORM/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/chconf.h b/testhal/STM32/STM32F30x/IRQ_STORM/chconf.h new file mode 100644 index 000000000..7ff9a1440 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/halconf.h b/testhal/STM32/STM32F30x/IRQ_STORM/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/main.c b/testhal/STM32/STM32F30x/IRQ_STORM/main.c new file mode 100644 index 000000000..89d688016 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/main.c @@ -0,0 +1,335 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOE, GPIOE_LED10_RED); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } + chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD1, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD1, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART1. + */ + sdStart(&SD1, NULL); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ + + /* + * Activates GPTs. + */ + gptStart(&GPTD4, &gpt4cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 10; interval -= interval / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F30x/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..082f71c8f --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 TRUE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 10 +#define STM32_GPT_TIM4_IRQ_PRIORITY 6 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt b/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt new file mode 100644 index 000000000..5193c5f89 --- /dev/null +++ b/testhal/STM32/STM32F30x/IRQ_STORM/readme.txt @@ -0,0 +1,32 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/PWM-ICU/.cproject b/testhal/STM32/STM32F30x/PWM-ICU/.cproject new file mode 100644 index 000000000..94e436ca4 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/PWM-ICU/.project b/testhal/STM32/STM32F30x/PWM-ICU/.project new file mode 100644 index 000000000..d8190d4c4 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/.project @@ -0,0 +1,38 @@ + + + STM32F30x-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/PWM-ICU/Makefile b/testhal/STM32/STM32F30x/PWM-ICU/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/PWM-ICU/chconf.h b/testhal/STM32/STM32F30x/PWM-ICU/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/PWM-ICU/halconf.h b/testhal/STM32/STM32F30x/PWM-ICU/halconf.h new file mode 100644 index 000000000..c1a492c2d --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/PWM-ICU/main.c b/testhal/STM32/STM32F30x/PWM-ICU/main.c new file mode 100644 index 000000000..96444baef --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/main.c @@ -0,0 +1,140 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(GPIOE, GPIOE_LED4_BLUE); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(GPIOE, GPIOE_LED4_BLUE); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0 +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + palSetPad(GPIOE, GPIOE_LED9_BLUE); + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + palClearPad(GPIOE, GPIOE_LED9_BLUE); + last_period = icuGetPeriod(icup); +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_HIGH, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + NULL, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the PWM driver 4 and ICU driver 3. + * GPIOD12 is the PWM output channel 0. + * GPIOC6 is the ICU input ICU_CHANNEL_1. + * The two pins have to be externally connected together. + */ + pwmStart(&PWMD4, &pwmcfg); + palSetPadMode(GPIOD, 12, PAL_MODE_ALTERNATE(2)); + icuStart(&ICUD3, &icucfg); + palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); + icuEnable(&ICUD3); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD4, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD4, 0); + pwmStop(&PWMD4); + icuDisable(&ICUD3); + icuStop(&ICUD3); + palClearPad(GPIOE, GPIOE_LED4_BLUE); + palClearPad(GPIOE, GPIOE_LED9_BLUE); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F30x/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F30x/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..bb59d7e27 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 TRUE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 TRUE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 TRUE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 TRUE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/PWM-ICU/readme.txt b/testhal/STM32/STM32F30x/PWM-ICU/readme.txt new file mode 100644 index 000000000..bf4069267 --- /dev/null +++ b/testhal/STM32/STM32F30x/PWM-ICU/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x PWM-ICU drivers. + +** Board Setup ** + +- Connect PD12 (PWM output) and PC6 (ICU input) together. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/SPI/.cproject b/testhal/STM32/STM32F30x/SPI/.cproject new file mode 100644 index 000000000..697309c7f --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/SPI/.project b/testhal/STM32/STM32F30x/SPI/.project new file mode 100644 index 000000000..5c0b3a88c --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/.project @@ -0,0 +1,90 @@ + + + STM32F30x-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j1 + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/SPI/Makefile b/testhal/STM32/STM32F30x/SPI/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/SPI/chconf.h b/testhal/STM32/STM32F30x/SPI/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/SPI/halconf.h b/testhal/STM32/STM32F30x/SPI/halconf.h new file mode 100644 index 000000000..99f546dd1 --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/SPI/main.c b/testhal/STM32/STM32F30x/SPI/main.c new file mode 100644 index 000000000..84c870354 --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/main.c @@ -0,0 +1,162 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 12, + 0, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOB, + 12, + SPI_CR1_BR_2 | SPI_CR1_BR_1, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static msg_t spi_thread_1(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palSetPad(GPIOE, GPIOE_LED10_RED); /* LED ON. */ + spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static msg_t spi_thread_2(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palClearPad(GPIOE, GPIOE_LED10_RED);/* LED OFF. */ + spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} +/* + * This is a periodic thread that does absolutely nothing except flashing + * a LED. + */ +static THD_WORKING_AREA(blinker_wa, 128); +static msg_t blinker(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOE, GPIOE_LED3_RED); + chThdSleepMilliseconds(500); + palClearPad(GPIOE, GPIOE_LED3_RED); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI2 I/O pins setup. + */ + palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ + palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ + palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ + palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | + PAL_STM32_OSPEED_HIGHEST); /* New CS. */ + palSetPad(GPIOB, 12); + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Starting the blinker thread. + */ + chThdCreateStatic(blinker_wa, sizeof(blinker_wa), + NORMALPRIO-1, blinker, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F30x/SPI/mcuconf.h b/testhal/STM32/STM32F30x/SPI/mcuconf.h new file mode 100644 index 000000000..8ba3d4ea8 --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/SPI/readme.txt b/testhal/STM32/STM32F30x/SPI/readme.txt new file mode 100644 index 000000000..9275c06ee --- /dev/null +++ b/testhal/STM32/STM32F30x/SPI/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x SPI driver. + +** Board Setup ** + +- Connect PB14 and PB15 together for SPI loop-back. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/UART/.cproject b/testhal/STM32/STM32F30x/UART/.cproject new file mode 100644 index 000000000..813ef9678 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/UART/.project b/testhal/STM32/STM32F30x/UART/.project new file mode 100644 index 000000000..15900d6dc --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/.project @@ -0,0 +1,90 @@ + + + STM32F30x-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F30x/UART/Makefile b/testhal/STM32/STM32F30x/UART/Makefile new file mode 100644 index 000000000..46e438ab8 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/UART/chconf.h b/testhal/STM32/STM32F30x/UART/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/UART/halconf.h b/testhal/STM32/STM32F30x/UART/halconf.h new file mode 100644 index 000000000..e9b103442 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/UART/main.c b/testhal/STM32/STM32F30x/UART/main.c new file mode 100644 index 000000000..170f14f20 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/main.c @@ -0,0 +1,142 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palClearPad(GPIOE, GPIOE_LED3_RED); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOE, GPIOE_LED3_RED); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palClearPad(GPIOE, GPIOE_LED3_RED); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTSetI(&vt1, MS2ST(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetPad(GPIOE, GPIOE_LED3_RED); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTSetI(&vt2, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART1. + */ + uartStart(&UARTD1, &uart_cfg_1); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD1, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F30x/UART/mcuconf.h b/testhal/STM32/STM32F30x/UART/mcuconf.h new file mode 100644 index 000000000..f3ebfcc2a --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 TRUE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/UART/readme.txt b/testhal/STM32/STM32F30x/UART/readme.txt new file mode 100644 index 000000000..3f55599a8 --- /dev/null +++ b/testhal/STM32/STM32F30x/UART/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x UART driver. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F30x/USB_CDC/.cproject b/testhal/STM32/STM32F30x/USB_CDC/.cproject new file mode 100644 index 000000000..49ee0dcf1 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F30x/USB_CDC/.project b/testhal/STM32/STM32F30x/USB_CDC/.project new file mode 100644 index 000000000..9c8e08513 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/.project @@ -0,0 +1,43 @@ + + + STM32F30x-USB_CDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/testhal/STM32/STM32F30x/USB_CDC/Makefile b/testhal/STM32/STM32F30x/USB_CDC/Makefile new file mode 100644 index 000000000..268398918 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F303xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F30x/USB_CDC/chconf.h b/testhal/STM32/STM32F30x/USB_CDC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/USB_CDC/halconf.h b/testhal/STM32/STM32F30x/USB_CDC/halconf.h new file mode 100644 index 000000000..09a9a0cdb --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F30x/USB_CDC/main.c b/testhal/STM32/STM32F30x/USB_CDC/main.c new file mode 100644 index 000000000..31122bcbd --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/main.c @@ -0,0 +1,516 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * DP resistor control is not possible on the STM32F3-Discovery, using stubs + * for the connection macros. + */ +#define usb_lld_connect_bus(usbp) +#define usb_lld_disconnect_bus(usbp) + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU1; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 1, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) +#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {CH_STATE_NAMES}; + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state]); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIOE, GPIOE_LED3_RED); + chThdSleepMilliseconds(time); + palSetPad(GPIOE, GPIOE_LED3_RED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + thread_t *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F30x/USB_CDC/mcuconf.h b/testhal/STM32/STM32F30x/USB_CDC/mcuconf.h new file mode 100644 index 000000000..57f596299 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/mcuconf.h @@ -0,0 +1,219 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F30x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC12_DMA_PRIORITY 2 +#define STM32_ADC_ADC34_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_DUAL_MODE FALSE + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F30x/USB_CDC/readme.txt b/testhal/STM32/STM32F30x/USB_CDC/readme.txt new file mode 100644 index 000000000..39055f999 --- /dev/null +++ b/testhal/STM32/STM32F30x/USB_CDC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - USB-CDC driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x USB driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/ADC/.cproject b/testhal/STM32/STM32F37x/ADC/.cproject new file mode 100644 index 000000000..2230bab81 --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/ADC/.project b/testhal/STM32/STM32F37x/ADC/.project new file mode 100644 index 000000000..1ac97fa04 --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/.project @@ -0,0 +1,38 @@ + + + STM32F37x-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/ADC/Makefile b/testhal/STM32/STM32F37x/ADC/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/ADC/chconf.h b/testhal/STM32/STM32F37x/ADC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/ADC/halconf.h b/testhal/STM32/STM32F37x/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/ADC/main.c b/testhal/STM32/STM32F37x/ADC/main.c new file mode 100644 index 000000000..b54733dae --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/main.c @@ -0,0 +1,172 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 2 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. + * Channels: IN1, IN9. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + .u.adc = { + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + 0, /* LTR */ + 0, /* HTR */ + { /* SMPR[2] */ + 0, + ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5), + }, + { /* SQR[3] */ + 0, + 0, + ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) + } + } +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN1, IN9, IN1, IN9, IN1, IN9, VBat, Sensor. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + .u.adc = { + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + 0, /* LTR */ + 0, /* HTR */ + { /* SMPR[2] */ + ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), + ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5) + }, + { /* SQR[3] */ + 0, + ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VBAT), + ADC_SQR3_SQ6_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN1) | + ADC_SQR3_SQ4_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN1) | + ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) + } + } +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palClearPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + palSetPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver, the temperature sensor and the VBat + * measurement. + */ + adcStart(&ADCD1, NULL); + adcSTM32Calibrate(&ADCD1); + adcSTM32EnableTSVREFE(); + adcSTM32EnableVBATE(); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { + adcStopConversion(&ADCD1); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F37x/ADC/mcuconf.h b/testhal/STM32/STM32F37x/ADC/mcuconf.h new file mode 100644 index 000000000..d4e69dafe --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/ADC/readme.txt b/testhal/STM32/STM32F37x/ADC/readme.txt new file mode 100644 index 000000000..8cb97fdc2 --- /dev/null +++ b/testhal/STM32/STM32F37x/ADC/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x ADC driver on the +ADC peripheral. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/CAN/.cproject b/testhal/STM32/STM32F37x/CAN/.cproject new file mode 100644 index 000000000..a6eeccae8 --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/CAN/.project b/testhal/STM32/STM32F37x/CAN/.project new file mode 100644 index 000000000..5afd7689e --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/.project @@ -0,0 +1,38 @@ + + + STM32F37x-CAN + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/CAN/Makefile b/testhal/STM32/STM32F37x/CAN/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/CAN/chconf.h b/testhal/STM32/STM32F37x/CAN/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/CAN/halconf.h b/testhal/STM32/STM32F37x/CAN/halconf.h new file mode 100644 index 000000000..a1195d7e1 --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/CAN/main.c b/testhal/STM32/STM32F37x/CAN/main.c new file mode 100644 index 000000000..7b8b7bf59 --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/main.c @@ -0,0 +1,109 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover + * from abort mode. + */ +static const CANConfig cancfg = { + CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, + CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | + CAN_BTR_TS1(8) | CAN_BTR_BRP(6) +}; + +/* + * Receiver thread. + */ +static THD_WORKING_AREA(can_rx_wa, 256); +static THD_FUNCTION(can_rx, p) { + event_listener_t el; + CANRxFrame rxmsg; + + (void)p; + chRegSetThreadName("receiver"); + chEvtRegister(&CAND1.rxfull_event, &el, 0); + while(!chThdShouldTerminateX()) { + if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + continue; + while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { + /* Process message.*/ + palTogglePad(GPIOC, GPIOC_LED1); + } + } + chEvtUnregister(&CAND1.rxfull_event, &el); + return 0; +} + +/* + * Transmitter thread. + */ +static THD_WORKING_AREA(can_tx_wa, 256); +static THD_FUNCTION(can_tx, p) { + CANTxFrame txmsg; + + (void)p; + chRegSetThreadName("transmitter"); + txmsg.IDE = CAN_IDE_EXT; + txmsg.EID = 0x01234567; + txmsg.RTR = CAN_RTR_DATA; + txmsg.DLC = 8; + txmsg.data32[0] = 0x55AA55AA; + txmsg.data32[1] = 0x00FF00FF; + + while (!chThdShouldTerminateX()) { + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the CAN driver 1. + */ + canStart(&CAND1, &cancfg); + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); + chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F37x/CAN/mcuconf.h b/testhal/STM32/STM32F37x/CAN/mcuconf.h new file mode 100644 index 000000000..169b64c76 --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/CAN/readme.txt b/testhal/STM32/STM32F37x/CAN/readme.txt new file mode 100644 index 000000000..9acc1deee --- /dev/null +++ b/testhal/STM32/STM32F37x/CAN/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - CAN driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x CAN driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/EXT/.cproject b/testhal/STM32/STM32F37x/EXT/.cproject new file mode 100644 index 000000000..420df3639 --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/EXT/.project b/testhal/STM32/STM32F37x/EXT/.project new file mode 100644 index 000000000..042fdd5c9 --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/.project @@ -0,0 +1,38 @@ + + + STM32F37x-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/EXT/Makefile b/testhal/STM32/STM32F37x/EXT/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/EXT/chconf.h b/testhal/STM32/STM32F37x/EXT/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/EXT/halconf.h b/testhal/STM32/STM32F37x/EXT/halconf.h new file mode 100644 index 000000000..5b67db37b --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/EXT/main.c b/testhal/STM32/STM32F37x/EXT/main.c new file mode 100644 index 000000000..ed42de752 --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/main.c @@ -0,0 +1,100 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void led5off(void *arg) { + + (void)arg; + palSetPad(GPIOC, GPIOC_LED1); +} + +/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + static virtual_timer_t vt4; + + (void)extp; + (void)channel; + + palClearPad(GPIOC, GPIOC_LED1); + chSysLockFromISR(); + chVTResetI(&vt4); + + /* LED4 set to OFF after 200mS.*/ + chVTDoSetI(&vt4, MS2ST(200), led5off, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32F37x/EXT/mcuconf.h b/testhal/STM32/STM32F37x/EXT/mcuconf.h new file mode 100644 index 000000000..169b64c76 --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/EXT/readme.txt b/testhal/STM32/STM32F37x/EXT/readme.txt new file mode 100644 index 000000000..e5a0e21fb --- /dev/null +++ b/testhal/STM32/STM32F37x/EXT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x EXT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/I2C/.cproject b/testhal/STM32/STM32F37x/I2C/.cproject new file mode 100644 index 000000000..367316a03 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/I2C/.project b/testhal/STM32/STM32F37x/I2C/.project new file mode 100644 index 000000000..e6d8e13d9 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/.project @@ -0,0 +1,38 @@ + + + STM32F37x-I2C + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/I2C/Makefile b/testhal/STM32/STM32F37x/I2C/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/I2C/chconf.h b/testhal/STM32/STM32F37x/I2C/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/I2C/halconf.h b/testhal/STM32/STM32F37x/I2C/halconf.h new file mode 100644 index 000000000..858b84dbe --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/I2C/main.c b/testhal/STM32/STM32F37x/I2C/main.c new file mode 100644 index 000000000..cd1ac7417 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/main.c @@ -0,0 +1,111 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Timing values are taken from the RM except the PRESC set to 9 because + * the input clock is 72MHz. + * The timings are critical, please always refer to the STM32 Reference + * Manual before attempting changes. + */ +#if 0 +static const I2CConfig i2cconfig = { + STM32_TIMINGR_PRESC(8U) | /* 72MHz/9 = 8MHz I2CCLK. */ + STM32_TIMINGR_SCLDEL(3U) | STM32_TIMINGR_SDADEL(3U) | + STM32_TIMINGR_SCLH(3U) | STM32_TIMINGR_SCLL(9U), + 0, + 0 +}; +#endif +static const I2CConfig i2cconfig = { + STM32_TIMINGR_PRESC(15U) | + STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) | + STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U), + 0, + 0 +}; + +/* + * This is a periodic thread that does absolutely nothing except flashing + * a LED. + */ +static THD_WORKING_AREA(blinker_wa, 128); +static THD_FUNCTION(blinker, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + palClearPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Starting the I2C driver 2. + */ + i2cStart(&I2CD2, &i2cconfig); + + /* + * Starting the blinker thread. + */ + chThdCreateStatic(blinker_wa, sizeof(blinker_wa), + NORMALPRIO-1, blinker, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + unsigned i; + msg_t msg; + static const uint8_t cmd[] = {0, 0}; + uint8_t data[16]; + + msg = i2cMasterTransmitTimeout(&I2CD2, 0x52, cmd, sizeof(cmd), + data, sizeof(data), TIME_INFINITE); + if (msg != MSG_OK) + palTogglePad(GPIOC, GPIOC_LED3); + for (i = 0; i < 256; i++) { + msg = i2cMasterReceiveTimeout(&I2CD2, 0x52, + data, sizeof(data), TIME_INFINITE); + if (msg != MSG_OK) + palTogglePad(GPIOC, GPIOC_LED3); + } + chThdSleepMilliseconds(500); + palTogglePad(GPIOC, GPIOC_LED2); + } + return 0; +} diff --git a/testhal/STM32/STM32F37x/I2C/mcuconf.h b/testhal/STM32/STM32F37x/I2C/mcuconf.h new file mode 100644 index 000000000..ae51be7b1 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 TRUE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/I2C/readme.txt b/testhal/STM32/STM32F37x/I2C/readme.txt new file mode 100644 index 000000000..f7d032869 --- /dev/null +++ b/testhal/STM32/STM32F37x/I2C/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - I2C driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x I2C driver. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/.cproject b/testhal/STM32/STM32F37x/IRQ_STORM/.cproject new file mode 100644 index 000000000..77982a8a0 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/.project b/testhal/STM32/STM32F37x/IRQ_STORM/.project new file mode 100644 index 000000000..9768d6602 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/.project @@ -0,0 +1,38 @@ + + + STM32F37x-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/Makefile b/testhal/STM32/STM32F37x/IRQ_STORM/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/chconf.h b/testhal/STM32/STM32F37x/IRQ_STORM/chconf.h new file mode 100644 index 000000000..7ff9a1440 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/halconf.h b/testhal/STM32/STM32F37x/IRQ_STORM/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/main.c b/testhal/STM32/STM32F37x/IRQ_STORM/main.c new file mode 100644 index 000000000..5d42eb65e --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/main.c @@ -0,0 +1,334 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOC, GPIOC_LED1); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt2cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt2cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt2cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } + chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD2, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD2, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 2 using the default configuration, pins + * are pre-configured in board.h. + */ + sdStart(&SD2, NULL); + + /* + * Activates GPTs. + */ + gptStart(&GPTD4, &gpt2cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 10; interval -= interval / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F37x/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..a913da351 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 TRUE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM12 TRUE +#define STM32_GPT_USE_TIM14 TRUE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 10 +#define STM32_GPT_TIM4_IRQ_PRIORITY 6 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/readme.txt b/testhal/STM32/STM32F37x/IRQ_STORM/readme.txt new file mode 100644 index 000000000..740cf3c20 --- /dev/null +++ b/testhal/STM32/STM32F37x/IRQ_STORM/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +- Connect a terminal emulator to serial port connector (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/PWM-ICU/.cproject b/testhal/STM32/STM32F37x/PWM-ICU/.cproject new file mode 100644 index 000000000..42e9f611b --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/PWM-ICU/.project b/testhal/STM32/STM32F37x/PWM-ICU/.project new file mode 100644 index 000000000..3ee772eaa --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/.project @@ -0,0 +1,38 @@ + + + STM32F37x-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/PWM-ICU/Makefile b/testhal/STM32/STM32F37x/PWM-ICU/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/PWM-ICU/chconf.h b/testhal/STM32/STM32F37x/PWM-ICU/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/PWM-ICU/halconf.h b/testhal/STM32/STM32F37x/PWM-ICU/halconf.h new file mode 100644 index 000000000..c1a492c2d --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/PWM-ICU/main.c b/testhal/STM32/STM32F37x/PWM-ICU/main.c new file mode 100644 index 000000000..ccc877f3f --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/main.c @@ -0,0 +1,138 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(GPIOC, GPIOC_LED1); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(GPIOC, GPIOC_LED1); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_LOW, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0 +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + palSetPad(GPIOC, GPIOC_LED2); + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + palClearPad(GPIOC, GPIOC_LED2); + last_period = icuGetPeriod(icup); +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_LOW, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + NULL, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the PWM driver 5 and ICU driver 3. + * GPIOC0 is the PWM output. + * GPIOC6 is the ICU input. + * The two pins have to be externally connected together. + */ + pwmStart(&PWMD5, &pwmcfg); + palSetPadMode(GPIOC, 0, PAL_MODE_ALTERNATE(2)); + icuStart(&ICUD3, &icucfg); + palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); + icuEnable(&ICUD3); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD5, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD5, 0); + pwmStop(&PWMD5); + icuDisable(&ICUD3); + icuStop(&ICUD3); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F37x/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F37x/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..d779ed3f8 --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 TRUE +#define STM32_ICU_USE_TIM4 TRUE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 TRUE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/PWM-ICU/readme.txt b/testhal/STM32/STM32F37x/PWM-ICU/readme.txt new file mode 100644 index 000000000..b1acb879a --- /dev/null +++ b/testhal/STM32/STM32F37x/PWM-ICU/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x PWM and ICU drivers. + +** Board Setup ** + +- Connect PC0 and PC6 together. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/SDADC/.cproject b/testhal/STM32/STM32F37x/SDADC/.cproject new file mode 100644 index 000000000..f3f922904 --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/SDADC/.project b/testhal/STM32/STM32F37x/SDADC/.project new file mode 100644 index 000000000..72cfb92b9 --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/.project @@ -0,0 +1,38 @@ + + + STM32F37x-SDADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/SDADC/Makefile b/testhal/STM32/STM32F37x/SDADC/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/SDADC/chconf.h b/testhal/STM32/STM32F37x/SDADC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/SDADC/halconf.h b/testhal/STM32/STM32F37x/SDADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/SDADC/main.c b/testhal/STM32/STM32F37x/SDADC/main.c new file mode 100644 index 000000000..6d5bd4383 --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/main.c @@ -0,0 +1,165 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 1 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 1 +#define ADC_GRP2_BUF_DEPTH 32 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * SDADC configuration. + */ +static const ADCConfig sdadc_config = { + 0, + { + SDADC_CONFR_GAIN_1X | SDADC_CONFR_SE_ZERO_VOLT | SDADC_CONFR_COMMON_VSSSD, + 0, + 0 + } +}; + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + * Channels: ADC_IN5P. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + .u.sdadc = { + SDADC_CR2_JSWSTART, /* CR2 */ + SDADC_JCHGR_CH(5), /* JCHGR */ + { /* CONFCHR[2]*/ + SDADC_CONFCHR1_CH5(0), + 0 + } + } +}; + +/* + * ADC conversion group. + * Mode: Continuous, 32 samples of 1 channel, SW triggered. + * Channels: ADC_IN5P. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + .u.sdadc = { + SDADC_CR2_JSWSTART, /* CR2 */ + SDADC_JCHGR_CH(5), /* JCHGR */ + { /* CONFCHR[2]*/ + SDADC_CONFCHR1_CH5(0), + 0 + } + } +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + palClearPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + palSetPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the SDADC1 driver. + */ + adcStart(&SDADCD1, &sdadc_config); + adcSTM32Calibrate(&SDADCD1); + + /* + * Linear conversion. + */ + adcConvert(&SDADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&SDADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { + adcStopConversion(&SDADCD1); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F37x/SDADC/mcuconf.h b/testhal/STM32/STM32F37x/SDADC/mcuconf.h new file mode 100644 index 000000000..9768c0deb --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_SDADC1 TRUE +#define STM32_ADC_USE_SDADC2 TRUE +#define STM32_ADC_USE_SDADC3 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/SDADC/readme.txt b/testhal/STM32/STM32F37x/SDADC/readme.txt new file mode 100644 index 000000000..0e5191419 --- /dev/null +++ b/testhal/STM32/STM32F37x/SDADC/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x ADC driver on the +SDADC peripheral. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/SPI/.cproject b/testhal/STM32/STM32F37x/SPI/.cproject new file mode 100644 index 000000000..5aaba7ac7 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/SPI/.project b/testhal/STM32/STM32F37x/SPI/.project new file mode 100644 index 000000000..b3ceb5b95 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/.project @@ -0,0 +1,38 @@ + + + STM32F37x-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/SPI/Makefile b/testhal/STM32/STM32F37x/SPI/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/SPI/chconf.h b/testhal/STM32/STM32F37x/SPI/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/SPI/halconf.h b/testhal/STM32/STM32F37x/SPI/halconf.h new file mode 100644 index 000000000..99f546dd1 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/SPI/main.c b/testhal/STM32/STM32F37x/SPI/main.c new file mode 100644 index 000000000..7c005122a --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/main.c @@ -0,0 +1,161 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 10, + 0, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOB, + 10, + SPI_CR1_BR_2 | SPI_CR1_BR_1, + SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static THD_FUNCTION(spi_thread_1, p) { + + (void)p; + + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palClearPad(GPIOC, GPIOC_LED2); /* LED ON. */ + spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static THD_FUNCTION(spi_thread_2, p) { + + (void)p; + + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palSetPad(GPIOC, GPIOC_LED2); /* LED OFF. */ + spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * This is a periodic thread that does absolutely nothing except flashing + * a LED. + */ +static THD_WORKING_AREA(blinker_wa, 128); +static THD_FUNCTION(blinker, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + palClearPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI2 I/O pins setup. + */ + palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ + palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Starting the blinker thread. + */ + chThdCreateStatic(blinker_wa, sizeof(blinker_wa), + NORMALPRIO-1, blinker, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F37x/SPI/mcuconf.h b/testhal/STM32/STM32F37x/SPI/mcuconf.h new file mode 100644 index 000000000..2269c0a54 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/SPI/readme.txt b/testhal/STM32/STM32F37x/SPI/readme.txt new file mode 100644 index 000000000..ebf5f3563 --- /dev/null +++ b/testhal/STM32/STM32F37x/SPI/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x SPI driver. + +** Board Setup ** + +- Connect PB14 and PB15 together for SPI loop-back. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/UART/.cproject b/testhal/STM32/STM32F37x/UART/.cproject new file mode 100644 index 000000000..be46a014d --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/UART/.project b/testhal/STM32/STM32F37x/UART/.project new file mode 100644 index 000000000..b1fb421f4 --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/.project @@ -0,0 +1,38 @@ + + + STM32F37x-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F37x/UART/Makefile b/testhal/STM32/STM32F37x/UART/Makefile new file mode 100644 index 000000000..d8a5decbb --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/UART/chconf.h b/testhal/STM32/STM32F37x/UART/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/UART/halconf.h b/testhal/STM32/STM32F37x/UART/halconf.h new file mode 100644 index 000000000..e9b103442 --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/UART/main.c b/testhal/STM32/STM32F37x/UART/main.c new file mode 100644 index 000000000..ddba3eed7 --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/main.c @@ -0,0 +1,140 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palSetPad(GPIOC, GPIOC_LED1); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOC, GPIOC_LED1); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOC, GPIOC_LED1); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palClearPad(GPIOC, GPIOC_LED1); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART2. + */ + uartStart(&UARTD2, &uart_cfg_1); + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD2, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F37x/UART/mcuconf.h b/testhal/STM32/STM32F37x/UART/mcuconf.h new file mode 100644 index 000000000..869b709e6 --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 TRUE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/UART/readme.txt b/testhal/STM32/STM32F37x/UART/readme.txt new file mode 100644 index 000000000..27b6bfefd --- /dev/null +++ b/testhal/STM32/STM32F37x/UART/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x UART driver. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F37x/USB_CDC/.cproject b/testhal/STM32/STM32F37x/USB_CDC/.cproject new file mode 100644 index 000000000..66a97f931 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F37x/USB_CDC/.project b/testhal/STM32/STM32F37x/USB_CDC/.project new file mode 100644 index 000000000..fb16abfeb --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/.project @@ -0,0 +1,43 @@ + + + STM32F37x-USB_CDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32373C_EVAL + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/testhal/STM32/STM32F37x/USB_CDC/Makefile b/testhal/STM32/STM32F37x/USB_CDC/Makefile new file mode 100644 index 000000000..ee16155a1 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F373xC.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/chprintf.c \ + $(CHIBIOS)/os/various/shell.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/USB_CDC/chconf.h b/testhal/STM32/STM32F37x/USB_CDC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/USB_CDC/halconf.h b/testhal/STM32/STM32F37x/USB_CDC/halconf.h new file mode 100644 index 000000000..09a9a0cdb --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F37x/USB_CDC/main.c b/testhal/STM32/STM32F37x/USB_CDC/main.c new file mode 100644 index 000000000..8730cabe6 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/main.c @@ -0,0 +1,516 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * DP resistor control. + */ +#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISCONNECT) +#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISCONNECT) + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU1; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 1, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) +#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {CH_STATE_NAMES}; + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state time\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state]); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(time); + palSetPad(GPIOC, GPIOC_LED1); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + thread_t *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F37x/USB_CDC/mcuconf.h b/testhal/STM32/STM32F37x/USB_CDC/mcuconf.h new file mode 100644 index 000000000..4ebd6c8a9 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/mcuconf.h @@ -0,0 +1,215 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F30x drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F37x_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_SDPRE STM32_SDPRE_DIV12 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_SDADC1 FALSE +#define STM32_ADC_USE_SDADC2 FALSE +#define STM32_ADC_USE_SDADC3 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC1_DMA_PRIORITY 2 +#define STM32_ADC_SDADC2_DMA_PRIORITY 2 +#define STM32_ADC_SDADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32F37x/USB_CDC/readme.txt b/testhal/STM32/STM32F37x/USB_CDC/readme.txt new file mode 100644 index 000000000..1c0755213 --- /dev/null +++ b/testhal/STM32/STM32F37x/USB_CDC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - USB-CDC driver demo for STM32F37x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32373C-EVAL board. + +** The Demo ** + +The application demonstrates the use of the STM32F37x USB driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/ADC/.cproject b/testhal/STM32/STM32F4xx/ADC/.cproject new file mode 100644 index 000000000..fe8f3f8c5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/ADC/.project b/testhal/STM32/STM32F4xx/ADC/.project new file mode 100644 index 000000000..8ce12644e --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/ADC/Makefile b/testhal/STM32/STM32F4xx/ADC/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/ADC/chconf.h b/testhal/STM32/STM32F4xx/ADC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/ADC/halconf.h b/testhal/STM32/STM32F4xx/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/ADC/main.c b/testhal/STM32/STM32F4xx/ADC/main.c new file mode 100644 index 000000000..7fff13612 --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/main.c @@ -0,0 +1,160 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 1 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + * Channels: IN11. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + ADC_SMPR1_SMP_AN11(ADC_SAMPLE_3), + 0, /* SMPR2 */ + ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), + 0, /* SQR2 */ + ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | + ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), + 0, /* SMPR2 */ + ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), + ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), + ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | + ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | + ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) +}; + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOD, GPIOD_LED5); + chThdSleepMilliseconds(500); + palClearPad(GPIOD, GPIOD_LED5); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + adcSTM32EnableTSVREFE(); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + adcStopConversion(&ADCD1); + adcSTM32DisableTSVREFE(); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F4xx/ADC/mcuconf.h b/testhal/STM32/STM32F4xx/ADC/mcuconf.h new file mode 100644 index 000000000..52b78c9f5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/ADC/readme.txt b/testhal/STM32/STM32F4xx/ADC/readme.txt new file mode 100644 index 000000000..af029649b --- /dev/null +++ b/testhal/STM32/STM32F4xx/ADC/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx ADC driver. + +** Board Setup ** + +- Connect PC1 to 3.3V and PC2 to GND for analog measurements. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/CAN/.cproject b/testhal/STM32/STM32F4xx/CAN/.cproject new file mode 100644 index 000000000..fb00be23a --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/CAN/.project b/testhal/STM32/STM32F4xx/CAN/.project new file mode 100644 index 000000000..91f465f67 --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/.project @@ -0,0 +1,90 @@ + + + STM32F4xx-CAN + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + ?name? + + + + org.eclipse.cdt.make.core.append_environment + true + + + org.eclipse.cdt.make.core.autoBuildTarget + all + + + org.eclipse.cdt.make.core.buildArguments + -j1 + + + org.eclipse.cdt.make.core.buildCommand + make + + + org.eclipse.cdt.make.core.cleanBuildTarget + clean + + + org.eclipse.cdt.make.core.contents + org.eclipse.cdt.make.core.activeConfigSettings + + + org.eclipse.cdt.make.core.enableAutoBuild + false + + + org.eclipse.cdt.make.core.enableCleanBuild + true + + + org.eclipse.cdt.make.core.enableFullBuild + true + + + org.eclipse.cdt.make.core.fullBuildTarget + all + + + org.eclipse.cdt.make.core.stopOnError + true + + + org.eclipse.cdt.make.core.useDefaultBuildCmd + true + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/CAN/Makefile b/testhal/STM32/STM32F4xx/CAN/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/CAN/chconf.h b/testhal/STM32/STM32F4xx/CAN/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/CAN/halconf.h b/testhal/STM32/STM32F4xx/CAN/halconf.h new file mode 100644 index 000000000..a1195d7e1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/CAN/main.c b/testhal/STM32/STM32F4xx/CAN/main.c new file mode 100644 index 000000000..f06bad79f --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/main.c @@ -0,0 +1,127 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +struct can_instance { + CANDriver *canp; + uint32_t led; +}; + +static const struct can_instance can1 = {&CAND1, GPIOD_LED5}; +static const struct can_instance can2 = {&CAND2, GPIOD_LED3}; + +/* + * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover + * from abort mode. + * See section 22.7.7 on the STM32 reference manual. + */ +static const CANConfig cancfg = { + CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, + CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | + CAN_BTR_TS1(8) | CAN_BTR_BRP(6) +}; + +/* + * Receiver thread. + */ +static THD_WORKING_AREA(can_rx1_wa, 256); +static THD_WORKING_AREA(can_rx2_wa, 256); +static msg_t can_rx(void *p) { + struct can_instance *cip = p; + event_listener_t el; + CANRxFrame rxmsg; + + (void)p; + chRegSetThreadName("receiver"); + chEvtRegister(&cip->canp->rxfull_event, &el, 0); + while(!chThdShouldTerminateX()) { + if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + continue; + while (canReceive(cip->canp, CAN_ANY_MAILBOX, + &rxmsg, TIME_IMMEDIATE) == MSG_OK) { + /* Process message.*/ + palTogglePad(GPIOD, cip->led); + } + } + chEvtUnregister(&CAND1.rxfull_event, &el); + return 0; +} + +/* + * Transmitter thread. + */ +static THD_WORKING_AREA(can_tx_wa, 256); +static msg_t can_tx(void * p) { + CANTxFrame txmsg; + + (void)p; + chRegSetThreadName("transmitter"); + txmsg.IDE = CAN_IDE_EXT; + txmsg.EID = 0x01234567; + txmsg.RTR = CAN_RTR_DATA; + txmsg.DLC = 8; + txmsg.data32[0] = 0x55AA55AA; + txmsg.data32[1] = 0x00FF00FF; + + while (!chThdShouldTerminateX()) { + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + canTransmit(&CAND2, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the CAN drivers 1 and 2. + */ + canStart(&CAND1, &cancfg); + canStart(&CAND2, &cancfg); + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(can_rx1_wa, sizeof(can_rx1_wa), NORMALPRIO + 7, + can_rx, (void *)&can1); + chThdCreateStatic(can_rx2_wa, sizeof(can_rx2_wa), NORMALPRIO + 7, + can_rx, (void *)&can2); + chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, + can_tx, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/CAN/mcuconf.h b/testhal/STM32/STM32F4xx/CAN/mcuconf.h new file mode 100644 index 000000000..4a7490bef --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_USE_CAN2 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/CAN/readme.txt b/testhal/STM32/STM32F4xx/CAN/readme.txt new file mode 100644 index 000000000..5884567ac --- /dev/null +++ b/testhal/STM32/STM32F4xx/CAN/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - CAN driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32 CAN driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/DAC/.cproject b/testhal/STM32/STM32F4xx/DAC/.cproject new file mode 100644 index 000000000..e05dca097 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/DAC/.project b/testhal/STM32/STM32F4xx/DAC/.project new file mode 100644 index 000000000..02d405ad8 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-DAC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/DAC/Makefile b/testhal/STM32/STM32F4xx/DAC/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/DAC/chconf.h b/testhal/STM32/STM32F4xx/DAC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/DAC/halconf.h b/testhal/STM32/STM32F4xx/DAC/halconf.h new file mode 100644 index 000000000..dc8857ac7 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/DAC/main.c b/testhal/STM32/STM32F4xx/DAC/main.c new file mode 100644 index 000000000..10da042ed --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/main.c @@ -0,0 +1,43 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Normal main() thread activity, if the button is pressed then the I2s + * transfer is stopped. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/DAC/mcuconf.h b/testhal/STM32/STM32F4xx/DAC/mcuconf.h new file mode 100644 index 000000000..c9c5681ac --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/mcuconf.h @@ -0,0 +1,332 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_PLLI2S +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_USE_CHN1 TRUE +#define STM32_DAC_USE_CHN2 FALSE +#define STM32_DAC_CHN1_IRQ_PRIORITY 10 +#define STM32_DAC_CHN2_IRQ_PRIORITY 10 +#define STM32_DAC_CHN1_DMA_PRIORITY 2 +#define STM32_DAC_CHN2_DMA_PRIORITY 2 +#define STM32_DAC_DMA_ERROR_HOOK(dacp) osalSysHalt() +#define STM32_DAC_CHN1_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_DAC_CHN2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/DAC/readme.txt b/testhal/STM32/STM32F4xx/DAC/readme.txt new file mode 100644 index 000000000..f1273c649 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DAC/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - DAC driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx DAC driver. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/.cproject b/testhal/STM32/STM32F4xx/DMA_STORM/.cproject new file mode 100644 index 000000000..4b78ef53c --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/.project b/testhal/STM32/STM32F4xx/DMA_STORM/.project new file mode 100644 index 000000000..9841eee9f --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-DMA_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/Makefile b/testhal/STM32/STM32F4xx/DMA_STORM/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/chconf.h b/testhal/STM32/STM32F4xx/DMA_STORM/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/halconf.h b/testhal/STM32/STM32F4xx/DMA_STORM/halconf.h new file mode 100644 index 000000000..09ca1aaad --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/main.c b/testhal/STM32/STM32F4xx/DMA_STORM/main.c new file mode 100644 index 000000000..e334e6a67 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/main.c @@ -0,0 +1,223 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + (void)buffer; + (void)n; +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; + chSysHalt("ADC error"); +} + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | + ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), + 0, /* SMPR2 */ + ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), + ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), + ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | + ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | + ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) +}; + +/* + * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 12, + 0 +}; + +static void tmo(void *p) { + + (void)p; + chSysHalt("timeout"); +} + +/* + * SPI thread. + */ +static THD_WORKING_AREA(waSPI1, 1024); +static THD_WORKING_AREA(waSPI2, 1024); +static THD_WORKING_AREA(waSPI3, 1024); +static msg_t spi_thread(void *p) { + unsigned i; + SPIDriver *spip = (SPIDriver *)p; + virtual_timer_t vt; + uint8_t txbuf[256]; + uint8_t rxbuf[256]; + + chVTObjectInit(&vt); + + /* Prepare transmit pattern.*/ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* Continuous transmission.*/ + while (TRUE) { + /* Starts a VT working as watchdog to catch a malfunction in the SPI + driver.*/ + chVTSet(&vt, MS2ST(10), tmo, NULL); + + spiExchange(spip, sizeof(txbuf), txbuf, rxbuf); + + /* Stops the watchdog.*/ + chVTReset(&vt); + } +} + +/* + * This is a periodic thread that does absolutely nothing except flashing + * a LED. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOD, GPIOD_LED3); /* Orange. */ + chThdSleepMilliseconds(500); + palClearPad(GPIOD, GPIOD_LED3); /* Orange. */ + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + static uint8_t patterns1[4096], patterns2[4096], buf1[4096], buf2[4096]; + + /* System initializations. + - HAL initialization, this also initializes the configured device drivers + and performs the board-specific initializations. + - Kernel initialization, the main() function becomes a thread and the + RTOS is active.*/ + halInit(); + chSysInit(); + + /* Creates the blinker thread.*/ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 10, + Thread1, NULL); + + /* Activates the ADC1 driver and the temperature sensor.*/ + adcStart(&ADCD1, NULL); + adcSTM32EnableTSVREFE(); + + /* Starts an ADC continuous conversion.*/ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* Activating SPI drivers.*/ + spiStart(&SPID1, &hs_spicfg); + spiStart(&SPID2, &hs_spicfg); + spiStart(&SPID3, &hs_spicfg); + + /* Starting SPI threads instances.*/ + chThdCreateStatic(waSPI1, sizeof(waSPI1), NORMALPRIO + 1, spi_thread, &SPID1); + chThdCreateStatic(waSPI2, sizeof(waSPI2), NORMALPRIO + 1, spi_thread, &SPID2); + chThdCreateStatic(waSPI3, sizeof(waSPI3), NORMALPRIO + 1, spi_thread, &SPID3); + + /* Allocating two DMA2 streams for memory copy operations.*/ + if (dmaStreamAllocate(STM32_DMA2_STREAM6, 0, NULL, NULL)) + chSysHalt("DMA already in use"); + if (dmaStreamAllocate(STM32_DMA2_STREAM7, 0, NULL, NULL)) + chSysHalt("DMA already in use"); + for (i = 0; i < sizeof (patterns1); i++) + patterns1[i] = (uint8_t)i; + for (i = 0; i < sizeof (patterns2); i++) + patterns2[i] = (uint8_t)(i ^ 0xAA); + + /* Normal main() thread activity, it does continues memory copy operations + using 2 DMA streams at the lowest priority.*/ + while (TRUE) { + virtual_timer_t vt; + + chVTObjectInit(&vt); + + /* Starts a VT working as watchdog to catch a malfunction in the DMA + driver.*/ + chVTSet(&vt, MS2ST(10), tmo, NULL); + + /* Copy pattern 1.*/ + dmaStartMemCopy(STM32_DMA2_STREAM6, + STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | + STM32_DMA_CR_MSIZE_BYTE, + patterns1, buf1, sizeof (patterns1)); + dmaStartMemCopy(STM32_DMA2_STREAM7, + STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | + STM32_DMA_CR_MSIZE_BYTE, + patterns1, buf2, sizeof (patterns1)); + dmaWaitCompletion(STM32_DMA2_STREAM6); + dmaWaitCompletion(STM32_DMA2_STREAM7); + if (memcmp(patterns1, buf1, sizeof (patterns1))) + chSysHalt("pattern error"); + if (memcmp(patterns1, buf2, sizeof (patterns1))) + chSysHalt("pattern error"); + + /* Copy pattern 2.*/ + dmaStartMemCopy(STM32_DMA2_STREAM6, + STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | + STM32_DMA_CR_MSIZE_BYTE, + patterns2, buf1, sizeof (patterns2)); + dmaStartMemCopy(STM32_DMA2_STREAM7, + STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | + STM32_DMA_CR_MSIZE_BYTE, + patterns2, buf2, sizeof (patterns2)); + dmaWaitCompletion(STM32_DMA2_STREAM6); + dmaWaitCompletion(STM32_DMA2_STREAM7); + if (memcmp(patterns2, buf1, sizeof (patterns2))) + chSysHalt("pattern error"); + if (memcmp(patterns2, buf2, sizeof (patterns2))) + chSysHalt("pattern error"); + + /* Stops the watchdog.*/ + chVTReset(&vt); + + chThdSleepMilliseconds(2); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/DMA_STORM/mcuconf.h b/testhal/STM32/STM32F4xx/DMA_STORM/mcuconf.h new file mode 100644 index 000000000..a7eb46af3 --- /dev/null +++ b/testhal/STM32/STM32F4xx/DMA_STORM/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_USE_CAN2 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 TRUE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/EXT/.cproject b/testhal/STM32/STM32F4xx/EXT/.cproject new file mode 100644 index 000000000..b7cb49ea0 --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/EXT/.project b/testhal/STM32/STM32F4xx/EXT/.project new file mode 100644 index 000000000..5e621fa15 --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/EXT/Makefile b/testhal/STM32/STM32F4xx/EXT/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/EXT/chconf.h b/testhal/STM32/STM32F4xx/EXT/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/EXT/halconf.h b/testhal/STM32/STM32F4xx/EXT/halconf.h new file mode 100644 index 000000000..5b67db37b --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/EXT/main.c b/testhal/STM32/STM32F4xx/EXT/main.c new file mode 100644 index 000000000..2963f52a1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/main.c @@ -0,0 +1,100 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void led5off(void *arg) { + + (void)arg; + palClearPad(GPIOD, GPIOD_LED5); +} + +/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + static virtual_timer_t vt4; + + (void)extp; + (void)channel; + + palSetPad(GPIOD, GPIOD_LED5); + chSysLockFromISR(); + chVTResetI(&vt4); + + /* LED4 set to OFF after 200mS.*/ + chVTSetI(&vt4, MS2ST(200), led5off, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32F4xx/EXT/mcuconf.h b/testhal/STM32/STM32F4xx/EXT/mcuconf.h new file mode 100644 index 000000000..81031a79a --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/EXT/readme.txt b/testhal/STM32/STM32F4xx/EXT/readme.txt new file mode 100644 index 000000000..1105f431e --- /dev/null +++ b/testhal/STM32/STM32F4xx/EXT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx EXT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/GPT/.cproject b/testhal/STM32/STM32F4xx/GPT/.cproject new file mode 100644 index 000000000..11c951acb --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/GPT/.project b/testhal/STM32/STM32F4xx/GPT/.project new file mode 100644 index 000000000..89464dd13 --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-GPT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/GPT/Makefile b/testhal/STM32/STM32F4xx/GPT/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/GPT/chconf.h b/testhal/STM32/STM32F4xx/GPT/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/GPT/halconf.h b/testhal/STM32/STM32F4xx/GPT/halconf.h new file mode 100644 index 000000000..fa562add8 --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/GPT/main.c b/testhal/STM32/STM32F4xx/GPT/main.c new file mode 100644 index 000000000..88fb58e7d --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/main.c @@ -0,0 +1,98 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + + (void)gptp; + palSetPad(GPIOD, GPIOD_LED5); + chSysLockFromISR(); + gptStartOneShotI(&GPTD3, 1000); /* 0.1 second pulse.*/ + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + + (void)gptp; + palClearPad(GPIOD, GPIOD_LED5); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 10000, /* 10kHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 10000, /* 10kHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the GPT drivers 2 and 3. + */ + gptStart(&GPTD4, &gpt4cfg); + gptPolledDelay(&GPTD4, 10); /* Small delay.*/ + gptStart(&GPTD3, &gpt3cfg); + gptPolledDelay(&GPTD3, 10); /* Small delay.*/ + + /* + * Normal main() thread activity, it changes the GPT1 period every + * five seconds. + */ + while (TRUE) { + palSetPad(GPIOD, GPIOD_LED4); + gptStartContinuous(&GPTD4, 5000); + chThdSleepMilliseconds(5000); + gptStopTimer(&GPTD4); + palClearPad(GPIOD, GPIOD_LED4); + gptStartContinuous(&GPTD4, 2500); + chThdSleepMilliseconds(5000); + gptStopTimer(&GPTD4); + } +} diff --git a/testhal/STM32/STM32F4xx/GPT/mcuconf.h b/testhal/STM32/STM32F4xx/GPT/mcuconf.h new file mode 100644 index 000000000..d238f12d1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 TRUE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 TRUE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_USE_TIM9 TRUE +#define STM32_GPT_USE_TIM11 TRUE +#define STM32_GPT_USE_TIM12 TRUE +#define STM32_GPT_USE_TIM14 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/GPT/readme.txt b/testhal/STM32/STM32F4xx/GPT/readme.txt new file mode 100644 index 000000000..1508a8233 --- /dev/null +++ b/testhal/STM32/STM32F4xx/GPT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - GPT driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx GPT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/I2C/.cproject b/testhal/STM32/STM32F4xx/I2C/.cproject new file mode 100644 index 000000000..8ceae86ea --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/I2C/.project b/testhal/STM32/STM32F4xx/I2C/.project new file mode 100644 index 000000000..a3b5ed440 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-I2C + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/I2C/Makefile b/testhal/STM32/STM32F4xx/I2C/Makefile new file mode 100644 index 000000000..609ed9012 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/I2C/chconf.h b/testhal/STM32/STM32F4xx/I2C/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/I2C/halconf.h b/testhal/STM32/STM32F4xx/I2C/halconf.h new file mode 100644 index 000000000..ae69b9284 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/I2C/main.c b/testhal/STM32/STM32F4xx/I2C/main.c new file mode 100644 index 000000000..b90feb138 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/main.c @@ -0,0 +1,181 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +/* + Concepts and parts of this file have been contributed by Uladzimir Pylinsky + aka barthess. + */ + +/** + * This demo acquire data from accelerometer and prints it in shell. + */ + +#include + +#include "ch.h" +#include "hal.h" + +/* buffers depth */ +#define ACCEL_RX_DEPTH 6 +#define ACCEL_TX_DEPTH 4 + +/* mma8451q specific addresses */ +#define ACCEL_OUT_DATA 0x01 +#define ACCEL_CTRL_REG1 0x2A + +static uint8_t rxbuf[ACCEL_RX_DEPTH]; +static uint8_t txbuf[ACCEL_TX_DEPTH]; +static i2cflags_t errors = 0; +static int16_t acceleration_x, acceleration_y, acceleration_z; +#define mma8451_addr 0b0011100 + +/** + * + */ +static void print(char *p) { + + while (*p) { + sdPut(&SD2, *p++); + } +} + +/** + * + */ +static void println(char *p) { + + while (*p) { + sdPut(&SD2, *p++); + } + sdWriteTimeout(&SD2, (uint8_t *)"\r\n", 2, TIME_INFINITE); +} + +/** + * + */ +static void printn(int16_t n) { + char buf[16], *p; + + if (n > 0) + sdPut(&SD2, '+'); + else{ + sdPut(&SD2, '-'); + n = abs(n); + } + + if (!n) + sdPut(&SD2, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + sdPut(&SD2, *--p); + } +} + +/** + * Converts data from 2complemented representation to signed integer + */ +int16_t complement2signed(uint8_t msb, uint8_t lsb){ + uint16_t word = 0; + word = (msb << 8) + lsb; + if (msb > 0x7F){ + return -1 * ((int16_t)((~word) + 1)); + } + return (int16_t)word; +} + +/* I2C interface #2 */ +static const I2CConfig i2cfg2 = { + OPMODE_I2C, + 400000, + FAST_DUTY_CYCLE_2, +}; + +/* + * Application entry point. + */ +int main(void) { + msg_t status = MSG_OK; + systime_t tmo = MS2ST(4); + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Starts I2C + */ + i2cStart(&I2CD2, &i2cfg2); + + /* + * Prepares the Serial driver 2 + */ + sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ + palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); + palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); + + /** + * Prepares the accelerometer + */ + txbuf[0] = ACCEL_CTRL_REG1; /* register address */ + txbuf[1] = 0x1; + i2cAcquireBus(&I2CD2); + status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 2, rxbuf, 0, tmo); + i2cReleaseBus(&I2CD2); + + if (status != MSG_OK){ + errors = i2cGetErrors(&I2CD2); + } + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + palTogglePad(GPIOB, GPIOB_LED_B); + chThdSleepMilliseconds(100); + + txbuf[0] = ACCEL_OUT_DATA; /* register address */ + i2cAcquireBus(&I2CD2); + status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 1, rxbuf, 6, tmo); + i2cReleaseBus(&I2CD2); + + if (status != MSG_OK){ + errors = i2cGetErrors(&I2CD2); + } + + acceleration_x = complement2signed(rxbuf[0], rxbuf[1]); + acceleration_y = complement2signed(rxbuf[2], rxbuf[3]); + acceleration_z = complement2signed(rxbuf[4], rxbuf[5]); + + print("x: "); + printn(acceleration_x); + print(" y: "); + printn(acceleration_y); + print(" z: "); + printn(acceleration_z); + println(""); + } +} + + + diff --git a/testhal/STM32/STM32F4xx/I2C/mcuconf.h b/testhal/STM32/STM32F4xx/I2C/mcuconf.h new file mode 100644 index 000000000..b7813c529 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2C/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 TRUE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 TRUE +#define STM32_I2C_USE_I2C3 TRUE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/I2S/.cproject b/testhal/STM32/STM32F4xx/I2S/.cproject new file mode 100644 index 000000000..e05dca097 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/I2S/.project b/testhal/STM32/STM32F4xx/I2S/.project new file mode 100644 index 000000000..a3373c0bf --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-I2S + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/I2S/Makefile b/testhal/STM32/STM32F4xx/I2S/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/I2S/chconf.h b/testhal/STM32/STM32F4xx/I2S/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/I2S/halconf.h b/testhal/STM32/STM32F4xx/I2S/halconf.h new file mode 100644 index 000000000..fb3e8905a --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S TRUE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/I2S/main.c b/testhal/STM32/STM32F4xx/I2S/main.c new file mode 100644 index 000000000..b96f22fb4 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/main.c @@ -0,0 +1,79 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define I2S_BUF_SIZE 256 + +static uint16_t i2s_rx_buf[I2S_BUF_SIZE]; + +static void i2scallback(I2SDriver *i2sp, size_t offset, size_t n); + +static const I2SConfig i2scfg = { + NULL, + i2s_rx_buf, + I2S_BUF_SIZE, + i2scallback, + 0, + 16 +}; + +static void i2scallback(I2SDriver *i2sp, size_t offset, size_t n) { + + (void)i2sp; + (void)offset; + (void)n; +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Starting and configuring the I2S driver 2. + */ + i2sStart(&I2SD2, &i2scfg); + palSetPadMode(GPIOB, 10, PAL_MODE_ALTERNATE(5)); + palSetPadMode(GPIOC, 3, PAL_MODE_ALTERNATE(5)); + + /* + * Starting continuous I2S transfer. + */ + i2sStartExchange(&I2SD2); + + /* + * Normal main() thread activity, if the button is pressed then the I2s + * transfer is stopped. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) + i2sStopExchange(&I2SD2); + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/I2S/mcuconf.h b/testhal/STM32/STM32F4xx/I2S/mcuconf.h new file mode 100644 index 000000000..8b49e5ebd --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/mcuconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_PLLI2S +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 TRUE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/I2S/readme.txt b/testhal/STM32/STM32F4xx/I2S/readme.txt new file mode 100644 index 000000000..515e02dd9 --- /dev/null +++ b/testhal/STM32/STM32F4xx/I2S/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - I2S driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx I2S driver. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/.cproject b/testhal/STM32/STM32F4xx/IRQ_STORM/.cproject new file mode 100644 index 000000000..bf4708179 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/.project b/testhal/STM32/STM32F4xx/IRQ_STORM/.project new file mode 100644 index 000000000..122d48d9d --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F4xx/IRQ_STORM/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/chconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM/chconf.h new file mode 100644 index 000000000..7ff9a1440 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/halconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.ewp b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.ewp new file mode 100644 index 000000000..ffd2532c1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.ewp @@ -0,0 +1,2289 @@ + + + + 2 + + Debug + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 14 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + board + + $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c + + + $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h + + + + os + + hal + + include + + $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\can.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h + + + + src + + $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\can.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c + + + + + kernel + + include + + $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h + + + + src + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c + + + + + platform + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h + + + + port + + STM32F4xx + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s + + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s + + + $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c + + + $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h + + + + + test + + $PROJ_DIR$\..\..\..\..\test\test.c + + + $PROJ_DIR$\..\..\..\..\test\test.h + + + $PROJ_DIR$\..\..\..\..\test\testbmk.c + + + $PROJ_DIR$\..\..\..\..\test\testbmk.h + + + $PROJ_DIR$\..\..\..\..\test\testdyn.c + + + $PROJ_DIR$\..\..\..\..\test\testdyn.h + + + $PROJ_DIR$\..\..\..\..\test\testevt.c + + + $PROJ_DIR$\..\..\..\..\test\testevt.h + + + $PROJ_DIR$\..\..\..\..\test\testheap.c + + + $PROJ_DIR$\..\..\..\..\test\testheap.h + + + $PROJ_DIR$\..\..\..\..\test\testmbox.c + + + $PROJ_DIR$\..\..\..\..\test\testmbox.h + + + $PROJ_DIR$\..\..\..\..\test\testmsg.c + + + $PROJ_DIR$\..\..\..\..\test\testmsg.h + + + $PROJ_DIR$\..\..\..\..\test\testmtx.c + + + $PROJ_DIR$\..\..\..\..\test\testmtx.h + + + $PROJ_DIR$\..\..\..\..\test\testpools.c + + + $PROJ_DIR$\..\..\..\..\test\testpools.h + + + $PROJ_DIR$\..\..\..\..\test\testqueues.c + + + $PROJ_DIR$\..\..\..\..\test\testqueues.h + + + $PROJ_DIR$\..\..\..\..\test\testsem.c + + + $PROJ_DIR$\..\..\..\..\test\testsem.h + + + $PROJ_DIR$\..\..\..\..\test\testthd.c + + + $PROJ_DIR$\..\..\..\..\test\testthd.h + + + + $PROJ_DIR$\..\chconf.h + + + $PROJ_DIR$\..\halconf.h + + + $PROJ_DIR$\..\main.c + + + $PROJ_DIR$\..\mcuconf.h + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.eww b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.eww new file mode 100644 index 000000000..f9b3b2000 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\ch.ewp + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.icf b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.icf new file mode 100644 index 000000000..c0a51f44c --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/iar/ch.icf @@ -0,0 +1,39 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x400; +/**** End of ICF editor section. ###ICF###*/ + +/* Size of the IRQ Stack (Main Stack).*/ +define symbol __ICFEDIT_size_irqstack__ = 0x400; + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; +define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; +define block SYSHEAP with alignment = 8 {section SYSHEAP}; +define block DATABSS with alignment = 8 {readwrite, zeroinit}; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; + +place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; +place in ROM_region {readonly}; +place at start of RAM_region {block IRQSTACK}; +place in RAM_region {block DATABSS, block HEAP}; +place in RAM_region {block SYSHEAP}; +place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/keil/ch.uvproj b/testhal/STM32/STM32F4xx/IRQ_STORM/keil/ch.uvproj new file mode 100644 index 000000000..b5e042b8a --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/keil/ch.uvproj @@ -0,0 +1,945 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + Demo + 0x4 + ARM-ADS + + + STM32F407VG + STMicroelectronics + IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 + + "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) + 6103 + stm32f4xx.h + + + + + + + + + + SFD\ST\STM32F4xx\STM32F4xx.sfr + 0 + + + + ST\STM32F4xx\ + ST\STM32F4xx\ + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + ch + 1 + 0 + 0 + 1 + 1 + .\lst\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 0 + 1 + 1 + 1 + 0 + 1 + + 0 + 8 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4100 + + STLink\ST-LINKIII-KEIL.dll + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 1 + 0 + 8 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x20020000 + 0x1 + + + + + + 1 + 4 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base + + ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + --cpreproc + + + ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + board + + + board.c + 1 + ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c + + + board.h + 5 + ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h + + + + + port + + + cstartup.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s + + + chcoreasm_v7m.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s + + + chcore.c + 1 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c + + + chcore_v7m.c + 1 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c + + + chcore.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h + + + chcore_v7m.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h + + + chtypes.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h + + + cmparams.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h + + + vectors.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s + + + nvic.c + 1 + ..\..\..\..\os\ports\common\ARMCMx\nvic.c + + + nvic.h + 5 + ..\..\..\..\os\ports\common\ARMCMx\nvic.h + + + + + kernel + + + chcond.c + 1 + ..\..\..\..\os\kernel\src\chcond.c + + + chdebug.c + 1 + ..\..\..\..\os\kernel\src\chdebug.c + + + chdynamic.c + 1 + ..\..\..\..\os\kernel\src\chdynamic.c + + + chevents.c + 1 + ..\..\..\..\os\kernel\src\chevents.c + + + chheap.c + 1 + ..\..\..\..\os\kernel\src\chheap.c + + + chlists.c + 1 + ..\..\..\..\os\kernel\src\chlists.c + + + chmboxes.c + 1 + ..\..\..\..\os\kernel\src\chmboxes.c + + + chmemcore.c + 1 + ..\..\..\..\os\kernel\src\chmemcore.c + + + chmempools.c + 1 + ..\..\..\..\os\kernel\src\chmempools.c + + + chmsg.c + 1 + ..\..\..\..\os\kernel\src\chmsg.c + + + chmtx.c + 1 + ..\..\..\..\os\kernel\src\chmtx.c + + + chqueues.c + 1 + ..\..\..\..\os\kernel\src\chqueues.c + + + chregistry.c + 1 + ..\..\..\..\os\kernel\src\chregistry.c + + + chschd.c + 1 + ..\..\..\..\os\kernel\src\chschd.c + + + chsem.c + 1 + ..\..\..\..\os\kernel\src\chsem.c + + + chsys.c + 1 + ..\..\..\..\os\kernel\src\chsys.c + + + chthreads.c + 1 + ..\..\..\..\os\kernel\src\chthreads.c + + + chvt.c + 1 + ..\..\..\..\os\kernel\src\chvt.c + + + ch.h + 5 + ..\..\..\..\os\kernel\include\ch.h + + + chbsem.h + 5 + ..\..\..\..\os\kernel\include\chbsem.h + + + chcond.h + 5 + ..\..\..\..\os\kernel\include\chcond.h + + + chdebug.h + 5 + ..\..\..\..\os\kernel\include\chdebug.h + + + chdynamic.h + 5 + ..\..\..\..\os\kernel\include\chdynamic.h + + + chevents.h + 5 + ..\..\..\..\os\kernel\include\chevents.h + + + chfiles.h + 5 + ..\..\..\..\os\kernel\include\chfiles.h + + + chheap.h + 5 + ..\..\..\..\os\kernel\include\chheap.h + + + chinline.h + 5 + ..\..\..\..\os\kernel\include\chinline.h + + + chioch.h + 5 + ..\..\..\..\os\kernel\include\chioch.h + + + chlists.h + 5 + ..\..\..\..\os\kernel\include\chlists.h + + + chmboxes.h + 5 + ..\..\..\..\os\kernel\include\chmboxes.h + + + chmemcore.h + 5 + ..\..\..\..\os\kernel\include\chmemcore.h + + + chmempools.h + 5 + ..\..\..\..\os\kernel\include\chmempools.h + + + chmsg.h + 5 + ..\..\..\..\os\kernel\include\chmsg.h + + + chmtx.h + 5 + ..\..\..\..\os\kernel\include\chmtx.h + + + chqueues.h + 5 + ..\..\..\..\os\kernel\include\chqueues.h + + + chregistry.h + 5 + ..\..\..\..\os\kernel\include\chregistry.h + + + chschd.h + 5 + ..\..\..\..\os\kernel\include\chschd.h + + + chsem.h + 5 + ..\..\..\..\os\kernel\include\chsem.h + + + chstreams.h + 5 + ..\..\..\..\os\kernel\include\chstreams.h + + + chsys.h + 5 + ..\..\..\..\os\kernel\include\chsys.h + + + chthreads.h + 5 + ..\..\..\..\os\kernel\include\chthreads.h + + + chvt.h + 5 + ..\..\..\..\os\kernel\include\chvt.h + + + + + hal + + + hal.c + 1 + ..\..\..\..\os\hal\src\hal.c + + + pal.c + 1 + ..\..\..\..\os\hal\src\pal.c + + + serial.c + 1 + ..\..\..\..\os\hal\src\serial.c + + + hal.h + 5 + ..\..\..\..\os\hal\include\hal.h + + + pal.h + 5 + ..\..\..\..\os\hal\include\pal.h + + + serial.h + 5 + ..\..\..\..\os\hal\include\serial.h + + + gpt.h + 5 + ..\..\..\..\os\hal\include\gpt.h + + + gpt.c + 1 + ..\..\..\..\os\hal\src\gpt.c + + + tm.c + 1 + ..\..\..\..\os\hal\src\tm.c + + + + + platform + + + gpt_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h + + + gpt_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c + + + hal_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c + + + hal_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h + + + pal_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c + + + pal_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h + + + serial_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c + + + serial_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h + + + stm32_dma.c + 1 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c + + + stm32_dma.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h + + + stm32_rcc.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h + + + stm32l1xx.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h + + + + + test + + + test.c + 1 + ..\..\..\..\test\test.c + + + testbmk.c + 1 + ..\..\..\..\test\testbmk.c + + + testdyn.c + 1 + ..\..\..\..\test\testdyn.c + + + testevt.c + 1 + ..\..\..\..\test\testevt.c + + + testheap.c + 1 + ..\..\..\..\test\testheap.c + + + testmbox.c + 1 + ..\..\..\..\test\testmbox.c + + + testmsg.c + 1 + ..\..\..\..\test\testmsg.c + + + testmtx.c + 1 + ..\..\..\..\test\testmtx.c + + + testpools.c + 1 + ..\..\..\..\test\testpools.c + + + testqueues.c + 1 + ..\..\..\..\test\testqueues.c + + + testsem.c + 1 + ..\..\..\..\test\testsem.c + + + testthd.c + 1 + ..\..\..\..\test\testthd.c + + + test.h + 5 + ..\..\..\..\test\test.h + + + testbmk.h + 5 + ..\..\..\..\test\testbmk.h + + + testdyn.h + 5 + ..\..\..\..\test\testdyn.h + + + testevt.h + 5 + ..\..\..\..\test\testevt.h + + + testheap.h + 5 + ..\..\..\..\test\testheap.h + + + testmbox.h + 5 + ..\..\..\..\test\testmbox.h + + + testmsg.h + 5 + ..\..\..\..\test\testmsg.h + + + testmtx.h + 5 + ..\..\..\..\test\testmtx.h + + + testpools.h + 5 + ..\..\..\..\test\testpools.h + + + testqueues.h + 5 + ..\..\..\..\test\testqueues.h + + + testsem.h + 5 + ..\..\..\..\test\testsem.h + + + testthd.h + 5 + ..\..\..\..\test\testthd.h + + + + + demo + + + main.c + 1 + ..\main.c + + + mcuconf.h + 5 + ..\mcuconf.h + + + chconf.h + 5 + ..\chconf.h + + + halconf.h + 5 + ..\halconf.h + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/main.c b/testhal/STM32/STM32F4xx/IRQ_STORM/main.c new file mode 100644 index 000000000..861a6e033 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/main.c @@ -0,0 +1,333 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOD, GPIOD_LED5); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } + chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD2, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD2, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Prepares the Serial driver 2 and GPT drivers 2 and 3. + */ + sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ + palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); + palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); + gptStart(&GPTD4, &gpt4cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; + interval >= 2; + interval -= (interval + 9) / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..9fca1da26 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 10 +#define STM32_GPT_TIM4_IRQ_PRIORITY 6 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM/readme.txt b/testhal/STM32/STM32F4xx/IRQ_STORM/readme.txt new file mode 100644 index 000000000..2b9f076f5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.cproject b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.cproject new file mode 100644 index 000000000..304afdf99 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.project b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.project new file mode 100644 index 000000000..d2e79b473 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-IRQ_STORM_FPU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/Makefile b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/Makefile new file mode 100644 index 000000000..43b51f622 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = hard +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + extfunc.c main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/chconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/chconf.h new file mode 100644 index 000000000..7ff9a1440 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/extfunc.c b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/extfunc.c new file mode 100644 index 000000000..0418e3124 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/extfunc.c @@ -0,0 +1,23 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +float ff1(float par) { + return par; +} + +float ff2(float par1, float par2, float par3, float par4) { + return (par1 + par2) * (par3 + par4); +} diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/halconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/halconf.h new file mode 100644 index 000000000..40207d045 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp new file mode 100644 index 000000000..186319a4c --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp @@ -0,0 +1,2292 @@ + + + + 2 + + Debug + + ARM + + 1 + + General + 3 + + 21 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 14 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 21 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 28 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 14 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + board + + $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c + + + $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h + + + + os + + hal + + include + + $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\can.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h + + + $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h + + + + src + + $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\can.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c + + + $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c + + + + + kernel + + include + + $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h + + + $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h + + + + src + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c + + + $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c + + + + + platform + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h + + + $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h + + + + port + + STM32F4xx + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s + + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h + + + $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s + + + $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c + + + $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h + + + + + test + + $PROJ_DIR$\..\..\..\..\test\test.c + + + $PROJ_DIR$\..\..\..\..\test\test.h + + + $PROJ_DIR$\..\..\..\..\test\testbmk.c + + + $PROJ_DIR$\..\..\..\..\test\testbmk.h + + + $PROJ_DIR$\..\..\..\..\test\testdyn.c + + + $PROJ_DIR$\..\..\..\..\test\testdyn.h + + + $PROJ_DIR$\..\..\..\..\test\testevt.c + + + $PROJ_DIR$\..\..\..\..\test\testevt.h + + + $PROJ_DIR$\..\..\..\..\test\testheap.c + + + $PROJ_DIR$\..\..\..\..\test\testheap.h + + + $PROJ_DIR$\..\..\..\..\test\testmbox.c + + + $PROJ_DIR$\..\..\..\..\test\testmbox.h + + + $PROJ_DIR$\..\..\..\..\test\testmsg.c + + + $PROJ_DIR$\..\..\..\..\test\testmsg.h + + + $PROJ_DIR$\..\..\..\..\test\testmtx.c + + + $PROJ_DIR$\..\..\..\..\test\testmtx.h + + + $PROJ_DIR$\..\..\..\..\test\testpools.c + + + $PROJ_DIR$\..\..\..\..\test\testpools.h + + + $PROJ_DIR$\..\..\..\..\test\testqueues.c + + + $PROJ_DIR$\..\..\..\..\test\testqueues.h + + + $PROJ_DIR$\..\..\..\..\test\testsem.c + + + $PROJ_DIR$\..\..\..\..\test\testsem.h + + + $PROJ_DIR$\..\..\..\..\test\testthd.c + + + $PROJ_DIR$\..\..\..\..\test\testthd.h + + + + $PROJ_DIR$\..\chconf.h + + + $PROJ_DIR$\..\extfunc.c + + + $PROJ_DIR$\..\halconf.h + + + $PROJ_DIR$\..\main.c + + + $PROJ_DIR$\..\mcuconf.h + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww new file mode 100644 index 000000000..f9b3b2000 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\ch.ewp + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf new file mode 100644 index 000000000..c0a51f44c --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf @@ -0,0 +1,39 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x400; +/**** End of ICF editor section. ###ICF###*/ + +/* Size of the IRQ Stack (Main Stack).*/ +define symbol __ICFEDIT_size_irqstack__ = 0x400; + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; +define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; +define block SYSHEAP with alignment = 8 {section SYSHEAP}; +define block DATABSS with alignment = 8 {readwrite, zeroinit}; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; + +place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; +place in ROM_region {readonly}; +place at start of RAM_region {block IRQSTACK}; +place in RAM_region {block DATABSS, block HEAP}; +place in RAM_region {block SYSHEAP}; +place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj new file mode 100644 index 000000000..0f02f5523 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj @@ -0,0 +1,945 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + Demo + 0x4 + ARM-ADS + + + STM32F407VG + STMicroelectronics + IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 + + "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") + UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) + 6103 + stm32f4xx.h + + + + + + + + + + SFD\ST\STM32F4xx\STM32F4xx.sfr + 0 + + + + ST\STM32F4xx\ + ST\STM32F4xx\ + + 0 + 0 + 0 + 0 + 1 + + .\obj\ + ch + 1 + 0 + 0 + 1 + 1 + .\lst\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + + + SARMCM3.DLL + -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + + + 1 + 1 + 0 + 1 + 1 + 1 + 0 + 1 + + 0 + 8 + + + + + + + + + + + + + + STLink\ST-LINKIII-KEIL.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4100 + + STLink\ST-LINKIII-KEIL.dll + "" () + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 1 + 0 + 8 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 1 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x20000 + + + 0 + 0x20020000 + 0x1 + + + + + + 1 + 4 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base + + ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + + --cpreproc + + + ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + board + + + board.c + 1 + ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c + + + board.h + 5 + ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h + + + + + port + + + cstartup.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s + + + chcoreasm_v7m.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s + + + chcore.c + 1 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c + + + chcore_v7m.c + 1 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c + + + chcore.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h + + + chcore_v7m.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h + + + chtypes.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h + + + cmparams.h + 5 + ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h + + + vectors.s + 2 + ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s + + + nvic.c + 1 + ..\..\..\..\os\ports\common\ARMCMx\nvic.c + + + nvic.h + 5 + ..\..\..\..\os\ports\common\ARMCMx\nvic.h + + + + + kernel + + + chcond.c + 1 + ..\..\..\..\os\kernel\src\chcond.c + + + chdebug.c + 1 + ..\..\..\..\os\kernel\src\chdebug.c + + + chdynamic.c + 1 + ..\..\..\..\os\kernel\src\chdynamic.c + + + chevents.c + 1 + ..\..\..\..\os\kernel\src\chevents.c + + + chheap.c + 1 + ..\..\..\..\os\kernel\src\chheap.c + + + chlists.c + 1 + ..\..\..\..\os\kernel\src\chlists.c + + + chmboxes.c + 1 + ..\..\..\..\os\kernel\src\chmboxes.c + + + chmemcore.c + 1 + ..\..\..\..\os\kernel\src\chmemcore.c + + + chmempools.c + 1 + ..\..\..\..\os\kernel\src\chmempools.c + + + chmsg.c + 1 + ..\..\..\..\os\kernel\src\chmsg.c + + + chmtx.c + 1 + ..\..\..\..\os\kernel\src\chmtx.c + + + chqueues.c + 1 + ..\..\..\..\os\kernel\src\chqueues.c + + + chregistry.c + 1 + ..\..\..\..\os\kernel\src\chregistry.c + + + chschd.c + 1 + ..\..\..\..\os\kernel\src\chschd.c + + + chsem.c + 1 + ..\..\..\..\os\kernel\src\chsem.c + + + chsys.c + 1 + ..\..\..\..\os\kernel\src\chsys.c + + + chthreads.c + 1 + ..\..\..\..\os\kernel\src\chthreads.c + + + chvt.c + 1 + ..\..\..\..\os\kernel\src\chvt.c + + + ch.h + 5 + ..\..\..\..\os\kernel\include\ch.h + + + chbsem.h + 5 + ..\..\..\..\os\kernel\include\chbsem.h + + + chcond.h + 5 + ..\..\..\..\os\kernel\include\chcond.h + + + chdebug.h + 5 + ..\..\..\..\os\kernel\include\chdebug.h + + + chdynamic.h + 5 + ..\..\..\..\os\kernel\include\chdynamic.h + + + chevents.h + 5 + ..\..\..\..\os\kernel\include\chevents.h + + + chfiles.h + 5 + ..\..\..\..\os\kernel\include\chfiles.h + + + chheap.h + 5 + ..\..\..\..\os\kernel\include\chheap.h + + + chinline.h + 5 + ..\..\..\..\os\kernel\include\chinline.h + + + chioch.h + 5 + ..\..\..\..\os\kernel\include\chioch.h + + + chlists.h + 5 + ..\..\..\..\os\kernel\include\chlists.h + + + chmboxes.h + 5 + ..\..\..\..\os\kernel\include\chmboxes.h + + + chmemcore.h + 5 + ..\..\..\..\os\kernel\include\chmemcore.h + + + chmempools.h + 5 + ..\..\..\..\os\kernel\include\chmempools.h + + + chmsg.h + 5 + ..\..\..\..\os\kernel\include\chmsg.h + + + chmtx.h + 5 + ..\..\..\..\os\kernel\include\chmtx.h + + + chqueues.h + 5 + ..\..\..\..\os\kernel\include\chqueues.h + + + chregistry.h + 5 + ..\..\..\..\os\kernel\include\chregistry.h + + + chschd.h + 5 + ..\..\..\..\os\kernel\include\chschd.h + + + chsem.h + 5 + ..\..\..\..\os\kernel\include\chsem.h + + + chstreams.h + 5 + ..\..\..\..\os\kernel\include\chstreams.h + + + chsys.h + 5 + ..\..\..\..\os\kernel\include\chsys.h + + + chthreads.h + 5 + ..\..\..\..\os\kernel\include\chthreads.h + + + chvt.h + 5 + ..\..\..\..\os\kernel\include\chvt.h + + + + + hal + + + hal.c + 1 + ..\..\..\..\os\hal\src\hal.c + + + pal.c + 1 + ..\..\..\..\os\hal\src\pal.c + + + serial.c + 1 + ..\..\..\..\os\hal\src\serial.c + + + hal.h + 5 + ..\..\..\..\os\hal\include\hal.h + + + pal.h + 5 + ..\..\..\..\os\hal\include\pal.h + + + serial.h + 5 + ..\..\..\..\os\hal\include\serial.h + + + gpt.h + 5 + ..\..\..\..\os\hal\include\gpt.h + + + gpt.c + 1 + ..\..\..\..\os\hal\src\gpt.c + + + + + platform + + + gpt_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h + + + gpt_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c + + + hal_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c + + + hal_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h + + + pal_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c + + + pal_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h + + + serial_lld.c + 1 + ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c + + + serial_lld.h + 5 + ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h + + + stm32_dma.c + 1 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c + + + stm32_dma.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h + + + stm32_rcc.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h + + + stm32l1xx.h + 5 + ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h + + + + + test + + + test.c + 1 + ..\..\..\..\test\test.c + + + testbmk.c + 1 + ..\..\..\..\test\testbmk.c + + + testdyn.c + 1 + ..\..\..\..\test\testdyn.c + + + testevt.c + 1 + ..\..\..\..\test\testevt.c + + + testheap.c + 1 + ..\..\..\..\test\testheap.c + + + testmbox.c + 1 + ..\..\..\..\test\testmbox.c + + + testmsg.c + 1 + ..\..\..\..\test\testmsg.c + + + testmtx.c + 1 + ..\..\..\..\test\testmtx.c + + + testpools.c + 1 + ..\..\..\..\test\testpools.c + + + testqueues.c + 1 + ..\..\..\..\test\testqueues.c + + + testsem.c + 1 + ..\..\..\..\test\testsem.c + + + testthd.c + 1 + ..\..\..\..\test\testthd.c + + + test.h + 5 + ..\..\..\..\test\test.h + + + testbmk.h + 5 + ..\..\..\..\test\testbmk.h + + + testdyn.h + 5 + ..\..\..\..\test\testdyn.h + + + testevt.h + 5 + ..\..\..\..\test\testevt.h + + + testheap.h + 5 + ..\..\..\..\test\testheap.h + + + testmbox.h + 5 + ..\..\..\..\test\testmbox.h + + + testmsg.h + 5 + ..\..\..\..\test\testmsg.h + + + testmtx.h + 5 + ..\..\..\..\test\testmtx.h + + + testpools.h + 5 + ..\..\..\..\test\testpools.h + + + testqueues.h + 5 + ..\..\..\..\test\testqueues.h + + + testsem.h + 5 + ..\..\..\..\test\testsem.h + + + testthd.h + 5 + ..\..\..\..\test\testthd.h + + + + + demo + + + main.c + 1 + ..\main.c + + + mcuconf.h + 5 + ..\mcuconf.h + + + chconf.h + 5 + ..\chconf.h + + + halconf.h + 5 + ..\halconf.h + + + extfunc.c + 1 + ..\extfunc.c + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/main.c b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/main.c new file mode 100644 index 000000000..7ec769a9c --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/main.c @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +float ff1(float par); + +float ff2(float par1, float par2, float par3, float par4); + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +static bool saturated; + +/* + * Test worker thread. + */ +static THD_WORKING_AREA(waWorkerThread, 128); +static msg_t WorkerThread(void *arg) { + + (void)arg; + + while(1) { + float f1, f2, f3, f4, f5; + + f1 = ff1(3.0f); + f2 = ff1(4.0f); + f3 = ff1(5.0f); + f5 = f1 + f2 + f3; + f4 = ff1(6.0f); + f5 = ff2(f5, f4, f5, f4); + if (f5 != 324.0f) + chSysHalt("float corrupion #1"); + } +} + +/* + * Test periodic thread. + */ +static THD_WORKING_AREA(waPeriodicThread, 128); +static msg_t PeriodicThread(void *arg) { + + (void)arg; + + while(1) { + float f1, f2, f3, f4, f5; + + f1 = ff1(4.0f); + f2 = ff1(5.0f); + f3 = ff1(6.0f); + f5 = f1 + f2 + f3; + f4 = ff1(7.0f); + f5 = ff2(f5, f4, f5, f4); + if (f5 != 484.0f) + chSysHalt("float corrupion #2"); + chThdSleepSeconds(1); + } +} + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + float f1, f2, f3, f4, f5; + + (void)gptp; + + f1 = ff1(2.0f); + f2 = ff1(3.0f); + f3 = ff1(4.0f); + f5 = f1 + f2 + f3; + f4 = ff1(5.0f); + f5 = ff2(f5, f4, f5, f4); + if (f5 != 196.0f) + chSysHalt("float corrupion #3"); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + float f1, f2, f3, f4, f5; + + (void)gptp; + + f1 = ff1(1.0f); + f2 = ff1(2.0f); + f3 = ff1(3.0f); + f5 = f1 + f2 + f3; + f4 = ff1(4.0f); + f5 = ff2(f5, f4, f5, f4); + if (f5 != 100.0f) + chSysHalt("float corrupion #4"); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD2, *p++); + } + chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD2, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD2, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Prepares the Serial driver 2 and GPT drivers 2 and 3. + */ + sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ + palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); + palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); + gptStart(&GPTD4, &gpt4cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the worker threads. + */ + chThdCreateStatic(waWorkerThread, sizeof waWorkerThread, + NORMALPRIO - 20, WorkerThread, NULL); + chThdCreateStatic(waPeriodicThread, sizeof waPeriodicThread, + NORMALPRIO - 10, PeriodicThread, NULL); + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM-FPU long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 10; interval -= interval / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/mcuconf.h b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/mcuconf.h new file mode 100644 index 000000000..9fca1da26 --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 10 +#define STM32_GPT_TIM4_IRQ_PRIORITY 6 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/readme.txt b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/readme.txt new file mode 100644 index 000000000..cb043261f --- /dev/null +++ b/testhal/STM32/STM32F4xx/IRQ_STORM_FPU/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM_FPU stress test demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx GPT, PAL and Serial +drivers in order to implement a system stress demo involving the FPU. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using YAGARTO 4.6.2. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/.cproject b/testhal/STM32/STM32F4xx/PWM-ICU/.cproject new file mode 100644 index 000000000..681cedec5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/.project b/testhal/STM32/STM32F4xx/PWM-ICU/.project new file mode 100644 index 000000000..c11e50bc5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/Makefile b/testhal/STM32/STM32F4xx/PWM-ICU/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/chconf.h b/testhal/STM32/STM32F4xx/PWM-ICU/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/halconf.h b/testhal/STM32/STM32F4xx/PWM-ICU/halconf.h new file mode 100644 index 000000000..c1a492c2d --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/main.c b/testhal/STM32/STM32F4xx/PWM-ICU/main.c new file mode 100644 index 000000000..a964d221e --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/main.c @@ -0,0 +1,140 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(GPIOD, GPIOD_LED5); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(GPIOD, GPIOD_LED5); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0 +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + palSetPad(GPIOD, GPIOD_LED4); + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + palClearPad(GPIOD, GPIOD_LED4); + last_period = icuGetPeriod(icup); +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_HIGH, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + NULL, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the PWM driver 2 and ICU driver 3. + * GPIOA8 is the PWM output. + * GPIOC6 is the ICU input. + * The two pins have to be externally connected together. + */ + pwmStart(&PWMD1, &pwmcfg); + palSetPadMode(GPIOA, 8, PAL_MODE_ALTERNATE(1)); + icuStart(&ICUD3, &icucfg); + palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); + icuEnable(&ICUD3); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD1, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD1, 0); + pwmStop(&PWMD1); + icuDisable(&ICUD3); + icuStop(&ICUD3); + palClearPad(GPIOD, GPIOD_LED4); + palClearPad(GPIOD, GPIOD_LED5); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F4xx/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..0a70a1cd1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 TRUE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/PWM-ICU/readme.txt b/testhal/STM32/STM32F4xx/PWM-ICU/readme.txt new file mode 100644 index 000000000..a2b9d67a5 --- /dev/null +++ b/testhal/STM32/STM32F4xx/PWM-ICU/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx PWM-ICU drivers. + +** Board Setup ** + +- Connect PA8 and PC6 together. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/RTC/.cproject b/testhal/STM32/STM32F4xx/RTC/.cproject new file mode 100644 index 000000000..698b866bf --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/RTC/.project b/testhal/STM32/STM32F4xx/RTC/.project new file mode 100644 index 000000000..b281eb7d2 --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-RTC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/RTC/Makefile b/testhal/STM32/STM32F4xx/RTC/Makefile new file mode 100644 index 000000000..1eb858fbd --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/Makefile @@ -0,0 +1,208 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/evtimer.c \ + $(CHIBIOS)/os/various/syscalls.c \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ + $(CHIBIOS)/os/various/chrtclib.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/RTC/chconf.h b/testhal/STM32/STM32F4xx/RTC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/RTC/halconf.h b/testhal/STM32/STM32F4xx/RTC/halconf.h new file mode 100644 index 000000000..76a560cdd --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC TRUE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/RTC/main.c b/testhal/STM32/STM32F4xx/RTC/main.c new file mode 100644 index 000000000..6b25d371a --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/main.c @@ -0,0 +1,239 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* +This structure is used to hold the values representing a calendar time. +It contains the following members, with the meanings as shown. + +int tm_sec seconds after minute [0-61] (61 allows for 2 leap-seconds) +int tm_min minutes after hour [0-59] +int tm_hour hours after midnight [0-23] +int tm_mday day of the month [1-31] +int tm_mon month of year [0-11] +int tm_year current year-1900 +int tm_wday days since Sunday [0-6] +int tm_yday days since January 1st [0-365] +int tm_isdst daylight savings indicator (1 = yes, 0 = no, -1 = unknown) +*/ +#define WAKEUP_TEST FALSE + +#include +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" +#include "chrtclib.h" + +#if WAKEUP_TEST +static RTCWakeup wakeupspec; +#endif +static RTCAlarm alarmspec; +static time_t unix_time; + +/* libc stub */ +int _getpid(void) {return 1;} +/* libc stub */ +void _exit(int i) {(void)i;} +/* libc stub */ +#include +#undef errno +extern int errno; +int _kill(int pid, int sig) { + (void)pid; + (void)sig; + errno = EINVAL; + return -1; +} + + +/* sleep indicator thread */ +static WORKING_AREA(blinkWA, 128); +static msg_t blink_thd(void *arg){ + (void)arg; + while (TRUE) { + chThdSleepMilliseconds(100); + palTogglePad(GPIOB, GPIOB_LED_R); + } + return 0; +} + +static void func_sleep(void){ + chSysLock(); + SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; + PWR->CR |= (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_CSBF | PWR_CR_CWUF); + RTC->ISR &= ~(RTC_ISR_ALRBF | RTC_ISR_ALRAF | RTC_ISR_WUTF | RTC_ISR_TAMP1F | + RTC_ISR_TSOVF | RTC_ISR_TSF); + __WFI(); +} + +static void cmd_sleep(BaseSequentialStream *chp, int argc, char *argv[]){ + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: sleep\r\n"); + return; + } + chprintf(chp, "Going to sleep.\r\n"); + + chThdSleepMilliseconds(200); + + /* going to anabiosis */ + func_sleep(); +} + +/* + * + */ +static void cmd_alarm(BaseSequentialStream *chp, int argc, char *argv[]){ + int i = 0; + + (void)argv; + if (argc < 1) { + goto ERROR; + } + + if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ + rtcGetAlarm(&RTCD1, 0, &alarmspec); + chprintf(chp, "%D%s",alarmspec," - alarm in STM internal format\r\n"); + return; + } + + if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ + i = atol(argv[1]); + alarmspec.tv_datetime = ((i / 10) & 7 << 4) | (i % 10) | RTC_ALRMAR_MSK4 | + RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2; + rtcSetAlarm(&RTCD1, 0, &alarmspec); + return; + } + else{ + goto ERROR; + } + +ERROR: + chprintf(chp, "Usage: alarm get\r\n"); + chprintf(chp, " alarm set N\r\n"); + chprintf(chp, "where N is alarm time in seconds\r\n"); +} + +/* + * + */ +static void cmd_date(BaseSequentialStream *chp, int argc, char *argv[]){ + (void)argv; + struct tm timp; + + if (argc == 0) { + goto ERROR; + } + + if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ + unix_time = rtcGetTimeUnixSec(&RTCD1); + + if (unix_time == -1){ + chprintf(chp, "incorrect time in RTC cell\r\n"); + } + else{ + chprintf(chp, "%D%s",unix_time," - unix time\r\n"); + rtcGetTimeTm(&RTCD1, &timp); + chprintf(chp, "%s%s",asctime(&timp)," - formatted time string\r\n"); + } + return; + } + + if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ + unix_time = atol(argv[1]); + if (unix_time > 0){ + rtcSetTimeUnixSec(&RTCD1, unix_time); + return; + } + else{ + goto ERROR; + } + } + else{ + goto ERROR; + } + +ERROR: + chprintf(chp, "Usage: date get\r\n"); + chprintf(chp, " date set N\r\n"); + chprintf(chp, "where N is time in seconds sins Unix epoch\r\n"); + chprintf(chp, "you can get current N value from unix console by the command\r\n"); + chprintf(chp, "%s", "date +\%s\r\n"); + return; +} + +static SerialConfig ser_cfg = { + 115200, + 0, + 0, + 0, +}; + +static const ShellCommand commands[] = { + {"alarm", cmd_alarm}, + {"date", cmd_date}, + {"sleep", cmd_sleep}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SD2, + commands +}; + + +/** + * Main function. + */ +int main(void){ + + halInit(); + chSysInit(); + chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL); + +#if !WAKEUP_TEST + /* switch off wakeup */ + rtcSetPeriodicWakeup_v2(&RTCD1, NULL); + + /* Shell initialization.*/ + sdStart(&SD2, &ser_cfg); + shellInit(); + static WORKING_AREA(waShell, 1024); + shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); + + /* wait until user do not want to test wakeup */ + while (TRUE){ + chThdSleepMilliseconds(200); + } + +#else + /* set wakeup */ + wakeupspec.wakeup = ((uint32_t)4) << 16; /* select 1 Hz clock source */ + wakeupspec.wakeup |= 9; /* set counter value to 9. Period will be 9+1 seconds. */ + rtcSetPeriodicWakeup_v2(&RTCD1, &wakeupspec); + + chThdSleepSeconds(3); + func_sleep(); +#endif /* !WAKEUP_TEST */ + + return 0; +} + + diff --git a/testhal/STM32/STM32F4xx/RTC/mcuconf.h b/testhal/STM32/STM32F4xx/RTC/mcuconf.h new file mode 100644 index 000000000..14aca7564 --- /dev/null +++ b/testhal/STM32/STM32F4xx/RTC/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED TRUE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/SDC/.cproject b/testhal/STM32/STM32F4xx/SDC/.cproject new file mode 100644 index 000000000..5315ed60f --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/SDC/.project b/testhal/STM32/STM32F4xx/SDC/.project new file mode 100644 index 000000000..665aec725 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-SDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/OLIMEX_STM32_E407 + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/SDC/Makefile b/testhal/STM32/STM32F4xx/SDC/Makefile new file mode 100644 index 000000000..c7a90fa3b --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_E407/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/chprintf.c \ + $(CHIBIOS)/os/various/shell.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/SDC/chconf.h b/testhal/STM32/STM32F4xx/SDC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/SDC/halconf.h b/testhal/STM32/STM32F4xx/SDC/halconf.h new file mode 100644 index 000000000..ec7ffc153 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/halconf.h @@ -0,0 +1,326 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC TRUE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief Write timeout in milliseconds. + */ +#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__) +#define SDC_WRITE_TIMEOUT_MS 250 +#endif + +/** + * @brief Write timeout in milliseconds. + */ +#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__) +#define SDC_READ_TIMEOUT_MS 5 +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/SDC/main.c b/testhal/STM32/STM32F4xx/SDC/main.c new file mode 100644 index 000000000..264f31133 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/main.c @@ -0,0 +1,223 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +#include "chprintf.h" +#include "shell.h" + +/* + * SDIO configuration. + */ +static const SDCConfig sdccfg = { + 0 +}; + +/* + * LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOC, GPIOC_LED); + chThdSleepMilliseconds(500); + palClearPad(GPIOC, GPIOC_LED); + chThdSleepMilliseconds(500); + } +} + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +#define SDC_BURST_SIZE 16 + +/* Buffer for block read/write operations, note that an extra byte is + allocated in order to support unaligned operations.*/ +static uint8_t buf[MMCSD_BLOCK_SIZE * SDC_BURST_SIZE + 1]; + +void cmd_sdc(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *mode[] = {"SDV11", "SDV20", "MMC", NULL}; + systime_t start, end; + uint32_t n, startblk; + + if (argc != 1) { + chprintf(chp, "Usage: sdiotest read|write|all\r\n"); + return; + } + + /* Card presence check.*/ + if (!blkIsInserted(&SDCD1)) { + chprintf(chp, "Card not inserted, aborting.\r\n"); + return; + } + + /* Connection to the card.*/ + chprintf(chp, "Connecting... "); + if (sdcConnect(&SDCD1)) { + chprintf(chp, "failed\r\n"); + return; + } + chprintf(chp, "OK\r\n\r\nCard Info\r\n"); + chprintf(chp, "CSD : %08X %8X %08X %08X \r\n", + SDCD1.csd[3], SDCD1.csd[2], SDCD1.csd[1], SDCD1.csd[0]); + chprintf(chp, "CID : %08X %8X %08X %08X \r\n", + SDCD1.cid[3], SDCD1.cid[2], SDCD1.cid[1], SDCD1.cid[0]); + chprintf(chp, "Mode : %s\r\n", mode[SDCD1.cardmode]); + chprintf(chp, "Capacity : %DMB\r\n", SDCD1.capacity / 2048); + + /* The test is performed in the middle of the flash area.*/ + startblk = (SDCD1.capacity / MMCSD_BLOCK_SIZE) / 2; + + if ((strcmp(argv[0], "read") == 0) || + (strcmp(argv[0], "all") == 0)) { + + /* Single block read performance, aligned.*/ + chprintf(chp, "Single block aligned read performance: "); + start = chVTGetSystemTime(); + end = start + MS2ST(1000); + n = 0; + do { + if (blkRead(&SDCD1, startblk, buf, 1)) { + chprintf(chp, "failed\r\n"); + goto exittest; + } + n++; + } while (chVTIsSystemTimeWithin(start, end)); + chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); + + /* Multiple sequential blocks read performance, aligned.*/ + chprintf(chp, "16 sequential blocks aligned read performance: "); + start = chVTGetSystemTime(); + end = start + MS2ST(1000); + n = 0; + do { + if (blkRead(&SDCD1, startblk, buf, SDC_BURST_SIZE)) { + chprintf(chp, "failed\r\n"); + goto exittest; + } + n += SDC_BURST_SIZE; + } while (chVTIsSystemTimeWithin(start, end)); + chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); + +#if STM32_SDC_SDIO_UNALIGNED_SUPPORT + /* Single block read performance, unaligned.*/ + chprintf(chp, "Single block unaligned read performance: "); + start = chVTGetSystemTime(); + end = start + MS2ST(1000); + n = 0; + do { + if (blkRead(&SDCD1, startblk, buf + 1, 1)) { + chprintf(chp, "failed\r\n"); + goto exittest; + } + n++; + } while (chVTIsSystemTimeWithin(start, end)); + chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); + + /* Multiple sequential blocks read performance, unaligned.*/ + chprintf(chp, "16 sequential blocks unaligned read performance: "); + start = chVTGetSystemTime(); + end = start + MS2ST(1000); + n = 0; + do { + if (blkRead(&SDCD1, startblk, buf + 1, SDC_BURST_SIZE)) { + chprintf(chp, "failed\r\n"); + goto exittest; + } + n += SDC_BURST_SIZE; + } while (chVTIsSystemTimeWithin(start, end)); + chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); +#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */ + } + + if ((strcmp(argv[0], "write") == 0) || + (strcmp(argv[0], "all") == 0)) { + + } + + /* Card disconnect and command end.*/ +exittest: + sdcDisconnect(&SDCD1); +} + +static const ShellCommand commands[] = { + {"sdc", cmd_sdc}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SD6, + commands +}; + +/* + * Application entry point. + */ +int main(void) { + thread_t *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Activates the serial driver 6 using the driver default configuration. + */ + sdStart(&SD6, NULL); + + /* + * Initializes the SDIO drivers. + */ + sdcStart(&SDCD1, &sdccfg); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (!shelltp) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F4xx/SDC/mcuconf.h b/testhal/STM32/STM32F4xx/SDC/mcuconf.h new file mode 100644 index 000000000..62f693419 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 12 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_USE_ADC2 TRUE +#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 TRUE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/SDC/readme.txt b/testhal/STM32/STM32F4xx/SDC/readme.txt new file mode 100644 index 000000000..1daeb6c94 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SDC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - SDC driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-E407 board. + +** The Demo ** + +The application demonstrates the use of the STM32 SDC driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/SPI/.cproject b/testhal/STM32/STM32F4xx/SPI/.cproject new file mode 100644 index 000000000..e05dca097 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/.cproject @@ -0,0 +1,52 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/SPI/.project b/testhal/STM32/STM32F4xx/SPI/.project new file mode 100644 index 000000000..cbee7f6e6 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/SPI/Makefile b/testhal/STM32/STM32F4xx/SPI/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/SPI/chconf.h b/testhal/STM32/STM32F4xx/SPI/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/SPI/halconf.h b/testhal/STM32/STM32F4xx/SPI/halconf.h new file mode 100644 index 000000000..99f546dd1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/SPI/main.c b/testhal/STM32/STM32F4xx/SPI/main.c new file mode 100644 index 000000000..3028c2113 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/main.c @@ -0,0 +1,138 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 12, + 0 +}; + +/* + * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOB, + 12, + SPI_CR1_BR_2 | SPI_CR1_BR_1 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static msg_t spi_thread_1(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palSetPad(GPIOD, GPIOD_LED5); /* LED ON. */ + spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static msg_t spi_thread_2(void *p) { + + (void)p; + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palClearPad(GPIOD, GPIOD_LED5); /* LED OFF. */ + spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI2 I/O pins setup. + */ + palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ + palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ + palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ + palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | + PAL_STM32_OSPEED_HIGHEST); /* New CS. */ + palSetPad(GPIOB, 12); + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32F4xx/SPI/mcuconf.h b/testhal/STM32/STM32F4xx/SPI/mcuconf.h new file mode 100644 index 000000000..2df7c0f29 --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 TRUE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/SPI/readme.txt b/testhal/STM32/STM32F4xx/SPI/readme.txt new file mode 100644 index 000000000..d3d78bc8c --- /dev/null +++ b/testhal/STM32/STM32F4xx/SPI/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an ST STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx SPI driver. + +** Board Setup ** + +- Connect PB14 and PB15 together for SPI loop-back. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/UART/.cproject b/testhal/STM32/STM32F4xx/UART/.cproject new file mode 100644 index 000000000..7bb8c14a7 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/UART/.project b/testhal/STM32/STM32F4xx/UART/.project new file mode 100644 index 000000000..8ba48d6a8 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F4xx/UART/Makefile b/testhal/STM32/STM32F4xx/UART/Makefile new file mode 100644 index 000000000..12616439a --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/Makefile @@ -0,0 +1,203 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/UART/chconf.h b/testhal/STM32/STM32F4xx/UART/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/UART/halconf.h b/testhal/STM32/STM32F4xx/UART/halconf.h new file mode 100644 index 000000000..e9b103442 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/UART/main.c b/testhal/STM32/STM32F4xx/UART/main.c new file mode 100644 index 000000000..3f01dc1a1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/main.c @@ -0,0 +1,160 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt3, vt4, vt5; + +static const uint8_t message[] = "0123456789ABCDEF"; +static uint8_t buffer[16]; + +static void led3off(void *p) { + + (void)p; + palClearPad(GPIOD, GPIOD_LED3); +} + +static void led4off(void *p) { + + (void)p; + palClearPad(GPIOD, GPIOD_LED4); +} + +static void led5off(void *p) { + + (void)p; + palClearPad(GPIOD, GPIOD_LED5); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOD, GPIOD_LED5); + chSysLockFromISR(); + chVTResetI(&vt5); + chVTSetI(&vt5, MS2ST(200), led5off, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetPad(GPIOD, GPIOD_LED4); + chSysLockFromISR(); + chVTResetI(&vt4); + chVTSetI(&vt4, MS2ST(200), led4off, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; + + /* Flashing the LED each time a character is received.*/ + palSetPad(GPIOD, GPIOD_LED3); + chSysLockFromISR(); + chVTResetI(&vt3); + chVTSetI(&vt3, MS2ST(200), led3off, NULL); + chSysUnlockFromISR(); +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the UART driver 2, PA2(TX) and PA3(RX) are routed to USART2. + */ + uartStart(&UARTD2, &uart_cfg_1); + palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); + palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); + + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + /* + * Starts both a transmission and a receive operations, both will be + * handled entirely in background. + */ + uartStopReceive(&UARTD2); + uartStopSend(&UARTD2); + uartStartReceive(&UARTD2, 16, buffer); + uartStartSend(&UARTD2, 16, message); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32F4xx/UART/mcuconf.h b/testhal/STM32/STM32F4xx/UART/mcuconf.h new file mode 100644 index 000000000..1ed301f80 --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 TRUE +#define STM32_UART_USE_UART4 TRUE +#define STM32_UART_USE_UART5 TRUE +#define STM32_UART_USE_USART6 TRUE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/UART/readme.txt b/testhal/STM32/STM32F4xx/UART/readme.txt new file mode 100644 index 000000000..19a8e26da --- /dev/null +++ b/testhal/STM32/STM32F4xx/UART/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32F4xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F4-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F4xx UART driver. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA2(TX) and PA3(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32F4xx/USB_CDC/.cproject b/testhal/STM32/STM32F4xx/USB_CDC/.cproject new file mode 100644 index 000000000..16a94a05d --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F4xx/USB_CDC/.project b/testhal/STM32/STM32F4xx/USB_CDC/.project new file mode 100644 index 000000000..defd5f312 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/.project @@ -0,0 +1,38 @@ + + + STM32F4xx-USB_CDC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + test + 2 + CHIBIOS/test + + + diff --git a/testhal/STM32/STM32F4xx/USB_CDC/Makefile b/testhal/STM32/STM32F4xx/USB_CDC/Makefile new file mode 100644 index 000000000..41b4492a1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_E407/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32F407xG.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/chprintf.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/USB_CDC/chconf.h b/testhal/STM32/STM32F4xx/USB_CDC/chconf.h new file mode 100644 index 000000000..b6ca0aa69 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/USB_CDC/halconf.h b/testhal/STM32/STM32F4xx/USB_CDC/halconf.h new file mode 100644 index 000000000..bb8ebc123 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F4xx/USB_CDC/main.c b/testhal/STM32/STM32F4xx/USB_CDC/main.c new file mode 100644 index 000000000..dd01ecb25 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/main.c @@ -0,0 +1,525 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" + +#include "shell.h" +#include "chprintf.h" + +/*===========================================================================*/ +/* USB related stuff. */ +/*===========================================================================*/ + +/* + * Endpoints to be used for USBD2. + */ +#define USBD2_DATA_REQUEST_EP 1 +#define USBD2_DATA_AVAILABLE_EP 1 +#define USBD2_INTERRUPT_REQUEST_EP 2 + +/* + * Serial over USB Driver structure. + */ +static SerialUSBDriver SDU2; + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0483, /* idVendor (ST). */ + 0x5740, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 3 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(38), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, + 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, + 'c', 0, 's', 0 +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(56), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, + 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, + 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, + 'o', 0, 'r', 0, 't', 0 +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU2); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * USB driver configuration. + */ +static const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + NULL +}; + +/* + * Serial over USB driver configuration. + */ +static const SerialUSBConfig serusbcfg = { + &USBD2, + USBD2_DATA_REQUEST_EP, + USBD2_DATA_AVAILABLE_EP, + USBD2_INTERRUPT_REQUEST_EP +}; + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) +#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) + +static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { + size_t n, size; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: mem\r\n"); + return; + } + n = chHeapStatus(NULL, &size); + chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); + chprintf(chp, "heap fragments : %u\r\n", n); + chprintf(chp, "heap free total : %u bytes\r\n", size); +} + +static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { + static const char *states[] = {CH_STATE_NAMES}; + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: threads\r\n"); + return; + } + chprintf(chp, " addr stack prio refs state time\r\n"); + tp = chRegFirstThread(); + do { + chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s\r\n", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), + states[tp->p_state]); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { + thread_t *tp; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: test\r\n"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), + TestThread, chp); + if (tp == NULL) { + chprintf(chp, "out of memory\r\n"); + return; + } + chThdWait(tp); +} + +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { + chSequentialStreamWrite(&SDU2, buf, sizeof buf - 1); + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU2, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (TRUE) { + systime_t time; + + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIOC, GPIOC_LED); + chThdSleepMilliseconds(time); + palSetPad(GPIOC, GPIOC_LED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + static THD_WORKING_AREA(wa_usb_lld_pump, STM32_USB_OTG_THREAD_STACK_SIZE); + thread_t *shelltp = NULL; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU2); + sduStart(&SDU2, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + chThdCreateStatic(wa_usb_lld_pump, sizeof(wa_usb_lld_pump), + STM32_USB_OTG_THREAD_PRIO, usb_lld_pump, serusbcfg.usbp); + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Stopping and restarting the USB in order to test the stop procedure. The + * following lines are not usually required. + */ + chThdSleepMilliseconds(3000); + usbDisconnectBus(serusbcfg.usbp); + usbStop(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + if (!shelltp && (SDU2.config->usbp->state == USB_ACTIVE)) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminatedX(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/testhal/STM32/STM32F4xx/USB_CDC/mcuconf.h b/testhal/STM32/STM32F4xx/USB_CDC/mcuconf.h new file mode 100644 index 000000000..160f4afec --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/mcuconf.h @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 12 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 +#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 250 +#define STM32_SDC_READ_TIMEOUT_MS 25 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_USE_OTG2 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32/STM32F4xx/USB_CDC/readme.txt b/testhal/STM32/STM32F4xx/USB_CDC/readme.txt new file mode 100644 index 000000000..a619a3ec1 --- /dev/null +++ b/testhal/STM32/STM32F4xx/USB_CDC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-E407 board. + +** The Demo ** + +The application demonstrates the use of the STM32 USB (OTG) driver. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/ADC/.cproject b/testhal/STM32/STM32L1xx/ADC/.cproject new file mode 100644 index 000000000..dd444dc30 --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/ADC/.project b/testhal/STM32/STM32L1xx/ADC/.project new file mode 100644 index 000000000..1cd6361af --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/ADC/Makefile b/testhal/STM32/STM32L1xx/ADC/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/ADC/chconf.h b/testhal/STM32/STM32L1xx/ADC/chconf.h new file mode 100644 index 000000000..68af751f1 --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/ADC/halconf.h b/testhal/STM32/STM32L1xx/ADC/halconf.h new file mode 100644 index 000000000..23d81defc --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/ADC/main.c b/testhal/STM32/STM32L1xx/ADC/main.c new file mode 100644 index 000000000..8a2b3897b --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/main.c @@ -0,0 +1,164 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 1 +#define ADC_GRP1_BUF_DEPTH 8 + +#define ADC_GRP2_NUM_CHANNELS 8 +#define ADC_GRP2_BUF_DEPTH 16 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; + +/* + * ADC streaming callback. + */ +size_t nx = 0, ny = 0; +static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + if (samples2 == buffer) { + nx += n; + } + else { + ny += n; + } +} + +static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { + + (void)adcp; + (void)err; +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + * Channels: IN10. + */ +static const ADCConversionGroup adcgrpcfg1 = { + FALSE, + ADC_GRP1_NUM_CHANNELS, + NULL, + adcerrorcallback, + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + 0, /* SMPR1 */ + ADC_SMPR2_SMP_AN10(ADC_SAMPLE_4), + 0, /* SMPR3 */ + ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), + 0, 0, 0, /* SQR2, SQR3, SQR4 */ + ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) +}; + +/* + * ADC conversion group. + * Mode: Continuous, 16 samples of 8 channels, SW triggered. + * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. + */ +static const ADCConversionGroup adcgrpcfg2 = { + TRUE, + ADC_GRP2_NUM_CHANNELS, + adccallback, + adcerrorcallback, + 0, /* CR1 */ + ADC_CR2_SWSTART, /* CR2 */ + 0, /* SMPR1 */ + ADC_SMPR2_SMP_AN11(ADC_SAMPLE_48) | ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | + ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192) | ADC_SMPR2_SMP_VREF(ADC_SAMPLE_192), + 0, /* SMPR3 */ + ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), + 0, 0, /* SQR2, SQR3 */ + ADC_SQR4_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR4_SQ7_N(ADC_CHANNEL_VREFINT), + ADC_SQR5_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ5_N(ADC_CHANNEL_IN10) | + ADC_SQR5_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ3_N(ADC_CHANNEL_IN10) | + ADC_SQR5_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (TRUE) { + palSetPad(GPIOB, GPIOB_LED4); + chThdSleepMilliseconds(500); + palClearPad(GPIOB, GPIOB_LED4); + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Setting up analog inputs used by the demo. + */ + palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), + 0, PAL_MODE_INPUT_ANALOG); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Activates the ADC1 driver and the temperature sensor. + */ + adcStart(&ADCD1, NULL); + adcSTM32EnableTSVREFE(); + + /* + * Linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + chThdSleepMilliseconds(1000); + + /* + * Starts an ADC continuous conversion. + */ + adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + if (palReadPad(GPIOA, GPIOA_BUTTON)) { + adcStopConversion(&ADCD1); + adcSTM32DisableTSVREFE(); + } + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32L1xx/ADC/mcuconf.h b/testhal/STM32/STM32L1xx/ADC/mcuconf.h new file mode 100644 index 000000000..4f936d8b3 --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/mcuconf.h @@ -0,0 +1,177 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/ADC/readme.txt b/testhal/STM32/STM32L1xx/ADC/readme.txt new file mode 100644 index 000000000..91e9574b3 --- /dev/null +++ b/testhal/STM32/STM32L1xx/ADC/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - ADC driver demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx ADC driver. + +** Board Setup ** + +- Remove the LCD module. +- Connect PC0 to 3.3V and PC1 to GND for analog measurements. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/EXT/.cproject b/testhal/STM32/STM32L1xx/EXT/.cproject new file mode 100644 index 000000000..2148e6575 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/EXT/.project b/testhal/STM32/STM32L1xx/EXT/.project new file mode 100644 index 000000000..07851af6f --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-EXT + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/EXT/Makefile b/testhal/STM32/STM32L1xx/EXT/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/EXT/chconf.h b/testhal/STM32/STM32L1xx/EXT/chconf.h new file mode 100644 index 000000000..68af751f1 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/EXT/halconf.h b/testhal/STM32/STM32L1xx/EXT/halconf.h new file mode 100644 index 000000000..aafa92685 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/EXT/main.c b/testhal/STM32/STM32L1xx/EXT/main.c new file mode 100644 index 000000000..218826786 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/main.c @@ -0,0 +1,98 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void led4off(void *arg) { + + (void)arg; + palClearPad(GPIOB, GPIOB_LED4); +} + +/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + static virtual_timer_t vt4; + + (void)extp; + (void)channel; + palSetPad(GPIOB, GPIOB_LED4); + chSysLockFromISR(); + chVTResetI(&vt4); + /* LED4 set to OFF after 200mS.*/ + chVTDoSetI(&vt4, MS2ST(200), led4off, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL}, + {EXT_CH_MODE_DISABLED, NULL} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 5 seconds intervals. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(5000); + extChannelEnable(&EXTD1, 0); + } +} diff --git a/testhal/STM32/STM32L1xx/EXT/mcuconf.h b/testhal/STM32/STM32L1xx/EXT/mcuconf.h new file mode 100644 index 000000000..753e83df3 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/mcuconf.h @@ -0,0 +1,171 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() +#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/EXT/readme.txt b/testhal/STM32/STM32L1xx/EXT/readme.txt new file mode 100644 index 000000000..16953a3c9 --- /dev/null +++ b/testhal/STM32/STM32L1xx/EXT/readme.txt @@ -0,0 +1,30 @@ +***************************************************************************** +** ChibiOS/RT HAL - EXT driver demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx EXT driver. + +** Board Setup ** + +None required. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject b/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject new file mode 100644 index 000000000..5b23e9f4d --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/.project b/testhal/STM32/STM32L1xx/IRQ_STORM/.project new file mode 100644 index 000000000..9fd81bee3 --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-IRQ_STORM + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile b/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h b/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h new file mode 100644 index 000000000..a1963f74c --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h b/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h new file mode 100644 index 000000000..8a0de4278 --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/main.c b/testhal/STM32/STM32L1xx/IRQ_STORM/main.c new file mode 100644 index 000000000..c66bd7e13 --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/main.c @@ -0,0 +1,335 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include + +#include "ch.h" +#include "hal.h" + +/*===========================================================================*/ +/* Configurable settings. */ +/*===========================================================================*/ + +#ifndef RANDOMIZE +#define RANDOMIZE FALSE +#endif + +#ifndef ITERATIONS +#define ITERATIONS 100 +#endif + +#ifndef NUM_THREADS +#define NUM_THREADS 4 +#endif + +#ifndef MAILBOX_SIZE +#define MAILBOX_SIZE 4 +#endif + +/*===========================================================================*/ +/* Test related code. */ +/*===========================================================================*/ + +#define MSG_SEND_LEFT 0 +#define MSG_SEND_RIGHT 1 + +static bool saturated; + +/* + * Mailboxes and buffers. + */ +static mailbox_t mb[NUM_THREADS]; +static msg_t b[NUM_THREADS][MAILBOX_SIZE]; + +/* + * Test worker threads. + */ +static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); +static msg_t WorkerThread(void *arg) { + static volatile unsigned x = 0; + static unsigned cnt = 0; + unsigned me = (unsigned)arg; + unsigned target; + unsigned r; + msg_t msg; + + chRegSetThreadName("worker"); + + /* Work loop.*/ + while (TRUE) { + /* Waiting for a message.*/ + chMBFetch(&mb[me], &msg, TIME_INFINITE); + +#if RANDOMIZE + /* Pseudo-random delay.*/ + { + chSysLock(); + r = rand() & 15; + chSysUnlock(); + while (r--) + x++; + } +#else + /* Fixed delay.*/ + { + r = me >> 4; + while (r--) + x++; + } +#endif + + /* Deciding in which direction to re-send the message.*/ + if (msg == MSG_SEND_LEFT) + target = me - 1; + else + target = me + 1; + + if (target < NUM_THREADS) { + /* If this thread is not at the end of a chain re-sending the message, + note this check works because the variable target is unsigned.*/ + msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + if (msg != MSG_OK) + saturated = TRUE; + } + else { + /* Provides a visual feedback about the system.*/ + if (++cnt >= 500) { + cnt = 0; + palTogglePad(GPIOB, GPIOB_LED4); + } + } + } +} + +/* + * GPT2 callback. + */ +static void gpt4cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT3 callback. + */ +static void gpt3cb(GPTDriver *gptp) { + msg_t msg; + + (void)gptp; + chSysLockFromISR(); + msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); + if (msg != MSG_OK) + saturated = TRUE; + chSysUnlockFromISR(); +} + +/* + * GPT2 configuration. + */ +static const GPTConfig gpt4cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt4cb, /* Timer callback.*/ + 0, + 0 +}; + +/* + * GPT3 configuration. + */ +static const GPTConfig gpt3cfg = { + 1000000, /* 1MHz timer clock.*/ + gpt3cb, /* Timer callback.*/ + 0, + 0 +}; + + +/*===========================================================================*/ +/* Generic demo code. */ +/*===========================================================================*/ + +static void print(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } +} + +static void println(char *p) { + + while (*p) { + chSequentialStreamPut(&SD1, *p++); + } + chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); +} + +static void printn(uint32_t n) { + char buf[16], *p; + + if (!n) + chSequentialStreamPut(&SD1, '0'); + else { + p = buf; + while (n) + *p++ = (n % 10) + '0', n /= 10; + while (p > buf) + chSequentialStreamPut(&SD1, *--p); + } +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + gptcnt_t interval, threshold, worst; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART1. + */ + sdStart(&SD1, NULL); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ + + /* + * Activates GPTs. + */ + gptStart(&GPTD4, &gpt4cfg); + gptStart(&GPTD3, &gpt3cfg); + + /* + * Initializes the mailboxes and creates the worker threads. + */ + for (i = 0; i < NUM_THREADS; i++) { + chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); + chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], + NORMALPRIO - 20, WorkerThread, (void *)i); + } + + /* + * Test procedure. + */ + println(""); + println("*** ChibiOS/RT IRQ-STORM long duration test"); + println("***"); + print("*** Kernel: "); + println(CH_KERNEL_VERSION); + print("*** Compiled: "); + println(__DATE__ " - " __TIME__); +#ifdef PORT_COMPILER_NAME + print("*** Compiler: "); + println(PORT_COMPILER_NAME); +#endif + print("*** Architecture: "); + println(PORT_ARCHITECTURE_NAME); +#ifdef PORT_CORE_VARIANT_NAME + print("*** Core Variant: "); + println(PORT_CORE_VARIANT_NAME); +#endif +#ifdef PORT_INFO + print("*** Port Info: "); + println(PORT_INFO); +#endif +#ifdef PLATFORM_NAME + print("*** Platform: "); + println(PLATFORM_NAME); +#endif +#ifdef BOARD_NAME + print("*** Test Board: "); + println(BOARD_NAME); +#endif + println("***"); + print("*** System Clock: "); + printn(STM32_SYSCLK); + println(""); + print("*** Iterations: "); + printn(ITERATIONS); + println(""); + print("*** Randomize: "); + printn(RANDOMIZE); + println(""); + print("*** Threads: "); + printn(NUM_THREADS); + println(""); + print("*** Mailbox size: "); + printn(MAILBOX_SIZE); + println(""); + + println(""); + worst = 0; + for (i = 1; i <= ITERATIONS; i++){ + print("Iteration "); + printn(i); + println(""); + saturated = FALSE; + threshold = 0; + for (interval = 2000; interval >= 10; interval -= interval / 10) { + gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ + gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ + chThdSleepMilliseconds(1000); + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + if (!saturated) + print("."); + else { + print("#"); + if (threshold == 0) + threshold = interval; + } + } + /* Gives the worker threads a chance to empty the mailboxes before next + cycle.*/ + chThdSleepMilliseconds(20); + println(""); + print("Saturated at "); + printn(threshold); + println(" uS"); + println(""); + if (threshold > worst) + worst = threshold; + } + gptStopTimer(&GPTD4); + gptStopTimer(&GPTD3); + + print("Worst case at "); + printn(worst); + println(" uS"); + println(""); + println("Test Complete"); + + /* + * Normal main() thread activity, nothing in this test. + */ + while (TRUE) { + chThdSleepMilliseconds(5000); + } +} diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h new file mode 100644 index 000000000..50ded9f4a --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/mcuconf.h @@ -0,0 +1,177 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 TRUE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 10 +#define STM32_GPT_TIM4_IRQ_PRIORITY 6 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 TRUE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt b/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt new file mode 100644 index 000000000..9483b1f02 --- /dev/null +++ b/testhal/STM32/STM32L1xx/IRQ_STORM/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx GPT, PAL and Serial +drivers in order to implement a system stress demo. + +** Board Setup ** + +None. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/.cproject b/testhal/STM32/STM32L1xx/PWM-ICU/.cproject new file mode 100644 index 000000000..b96ec18ee --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/.project b/testhal/STM32/STM32L1xx/PWM-ICU/.project new file mode 100644 index 000000000..9b7b1ba58 --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-PWM-ICU + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/Makefile b/testhal/STM32/STM32L1xx/PWM-ICU/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h b/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h new file mode 100644 index 000000000..68af751f1 --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h b/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h new file mode 100644 index 000000000..a5adf535c --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU TRUE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/main.c b/testhal/STM32/STM32L1xx/PWM-ICU/main.c new file mode 100644 index 000000000..9e5955e4a --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/main.c @@ -0,0 +1,140 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static void pwmpcb(PWMDriver *pwmp) { + + (void)pwmp; + palClearPad(GPIOB, GPIOB_LED4); +} + +static void pwmc1cb(PWMDriver *pwmp) { + + (void)pwmp; + palSetPad(GPIOB, GPIOB_LED4); +} + +static PWMConfig pwmcfg = { + 10000, /* 10kHz PWM clock frequency. */ + 10000, /* Initial PWM period 1S. */ + pwmpcb, + { + {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, + 0 +}; + +icucnt_t last_width, last_period; + +static void icuwidthcb(ICUDriver *icup) { + + palSetPad(GPIOB, GPIOB_LED3); + last_width = icuGetWidth(icup); +} + +static void icuperiodcb(ICUDriver *icup) { + + palClearPad(GPIOB, GPIOB_LED3); + last_period = icuGetPeriod(icup); +} + +static ICUConfig icucfg = { + ICU_INPUT_ACTIVE_HIGH, + 10000, /* 10kHz ICU clock frequency. */ + icuwidthcb, + icuperiodcb, + NULL, + ICU_CHANNEL_1, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes the PWM driver 2 and ICU driver 3. + * GPIOA15 is the PWM output. + * GPIOC6 is the ICU input. + * The two pins have to be externally connected together. + */ + pwmStart(&PWMD2, &pwmcfg); + palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); + icuStart(&ICUD3, &icucfg); + palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); + icuEnable(&ICUD3); + chThdSleepMilliseconds(2000); + + /* + * Starts the PWM channel 0 using 75% duty cycle. + */ + pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 50% duty cycle. + */ + pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); + chThdSleepMilliseconds(5000); + + /* + * Changes the PWM channel 0 to 25% duty cycle. + */ + pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); + chThdSleepMilliseconds(5000); + + /* + * Changes PWM period to half second the duty cycle becomes 50% + * implicitly. + */ + pwmChangePeriod(&PWMD2, 5000); + chThdSleepMilliseconds(5000); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWMD2, 0); + pwmStop(&PWMD2); + icuDisable(&ICUD3); + icuStop(&ICUD3); + palClearPad(GPIOB, GPIOB_LED3); + palClearPad(GPIOB, GPIOB_LED4); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h b/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h new file mode 100644 index 000000000..ee982438b --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/mcuconf.h @@ -0,0 +1,177 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 TRUE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 TRUE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 4 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt b/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt new file mode 100644 index 000000000..52a2dd2ad --- /dev/null +++ b/testhal/STM32/STM32L1xx/PWM-ICU/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo will on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx PWM-ICU drivers. + +** Board Setup ** + +- Remove the LCD module. +- Connect PA15 and PC6 together. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/SPI/.cproject b/testhal/STM32/STM32L1xx/SPI/.cproject new file mode 100644 index 000000000..b2bc5eb2d --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/SPI/.project b/testhal/STM32/STM32L1xx/SPI/.project new file mode 100644 index 000000000..5e89c246f --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-SPI + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/SPI/Makefile b/testhal/STM32/STM32L1xx/SPI/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/SPI/chconf.h b/testhal/STM32/STM32L1xx/SPI/chconf.h new file mode 100644 index 000000000..68af751f1 --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/SPI/halconf.h b/testhal/STM32/STM32L1xx/SPI/halconf.h new file mode 100644 index 000000000..6549d25d6 --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/SPI/main.c b/testhal/STM32/STM32L1xx/SPI/main.c new file mode 100644 index 000000000..4931106fd --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/main.c @@ -0,0 +1,139 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +/* + * Maximum speed SPI configuration (16MHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig hs_spicfg = { + NULL, + GPIOB, + 12, + 0 +}; + +/* + * Low speed SPI configuration (256kHz, CPHA=0, CPOL=0, MSb first). + */ +static const SPIConfig ls_spicfg = { + NULL, + GPIOB, + 12, + SPI_CR1_BR_2 | SPI_CR1_BR_1 +}; + +/* + * SPI TX and RX buffers. + */ +static uint8_t txbuf[512]; +static uint8_t rxbuf[512]; + +/* + * SPI bus contender 1. + */ +static THD_WORKING_AREA(spi_thread_1_wa, 256); +static THD_FUNCTION(spi_thread_1, p) { + + (void)p; + + chRegSetThreadName("SPI thread 1"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palSetPad(GPIOB, GPIOB_LED4); /* LED ON. */ + spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * SPI bus contender 2. + */ +static THD_WORKING_AREA(spi_thread_2_wa, 256); +static THD_FUNCTION(spi_thread_2, p) { + + (void)p; + + chRegSetThreadName("SPI thread 2"); + while (TRUE) { + spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ + palClearPad(GPIOB, GPIOB_LED4); /* LED OFF. */ + spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ + spiSelect(&SPID2); /* Slave Select assertion. */ + spiExchange(&SPID2, 512, + txbuf, rxbuf); /* Atomic transfer operations. */ + spiUnselect(&SPID2); /* Slave Select de-assertion. */ + spiReleaseBus(&SPID2); /* Ownership release. */ + } + return 0; +} + +/* + * Application entry point. + */ +int main(void) { + unsigned i; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * SPI1 I/O pins setup. + */ + palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | + PAL_STM32_OSPEED_HIGHEST); /* NSS. */ + palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* SCK. */ + palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5)); /* MISO. */ + palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | + PAL_STM32_OSPEED_HIGHEST); /* MOSI. */ + palSetPad(GPIOB, 12); + + /* + * Prepare transmit pattern. + */ + for (i = 0; i < sizeof(txbuf); i++) + txbuf[i] = (uint8_t)i; + + /* + * Starting the transmitter and receiver threads. + */ + chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), + NORMALPRIO + 1, spi_thread_1, NULL); + chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), + NORMALPRIO + 1, spi_thread_2, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/STM32L1xx/SPI/mcuconf.h b/testhal/STM32/STM32L1xx/SPI/mcuconf.h new file mode 100644 index 000000000..f91b311e4 --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/mcuconf.h @@ -0,0 +1,177 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/SPI/readme.txt b/testhal/STM32/STM32L1xx/SPI/readme.txt new file mode 100644 index 000000000..2ce870851 --- /dev/null +++ b/testhal/STM32/STM32L1xx/SPI/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/RT HAL - SPI driver demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx SPI driver. + +** Board Setup ** + +- Remove the LCD module. +- Connect PB14 and PB15 together for SPI loop-back. + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32/STM32L1xx/UART/.cproject b/testhal/STM32/STM32L1xx/UART/.cproject new file mode 100644 index 000000000..dc7b9ec94 --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/.cproject @@ -0,0 +1,51 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32L1xx/UART/.project b/testhal/STM32/STM32L1xx/UART/.project new file mode 100644 index 000000000..ef391b72f --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/.project @@ -0,0 +1,33 @@ + + + STM32L1xx-UART + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32L1xx/UART/Makefile b/testhal/STM32/STM32L1xx/UART/Makefile new file mode 100644 index 000000000..ad1bb67f8 --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(PORTLD)/STM32L152xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/UART/chconf.h b/testhal/STM32/STM32L1xx/UART/chconf.h new file mode 100644 index 000000000..68af751f1 --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/UART/halconf.h b/testhal/STM32/STM32L1xx/UART/halconf.h new file mode 100644 index 000000000..243190f6d --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/halconf.h @@ -0,0 +1,319 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the TM subsystem. + */ +#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) +#define HAL_USE_TM TRUE +#endif + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32L1xx/UART/main.c b/testhal/STM32/STM32L1xx/UART/main.c new file mode 100644 index 000000000..f8b19014c --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/main.c @@ -0,0 +1,142 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +static virtual_timer_t vt1, vt2; + +static void restart(void *p) { + + (void)p; + + chSysLockFromISR(); + uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); + chSysUnlockFromISR(); +} + +static void ledoff(void *p) { + + (void)p; + palClearPad(GPIOB, GPIOB_LED4); +} + +/* + * This callback is invoked when a transmission buffer has been completely + * read by the driver. + */ +static void txend1(UARTDriver *uartp) { + + (void)uartp; + palSetPad(GPIOB, GPIOB_LED4); +} + +/* + * This callback is invoked when a transmission has physically completed. + */ +static void txend2(UARTDriver *uartp) { + + (void)uartp; + palClearPad(GPIOB, GPIOB_LED4); + chSysLockFromISR(); + chVTResetI(&vt1); + chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked on a receive error, the errors mask is passed + * as parameter. + */ +static void rxerr(UARTDriver *uartp, uartflags_t e) { + + (void)uartp; + (void)e; +} + +/* + * This callback is invoked when a character is received but the application + * was not ready to receive it, the character is passed as parameter. + */ +static void rxchar(UARTDriver *uartp, uint16_t c) { + + (void)uartp; + (void)c; + /* Flashing the LED each time a character is received.*/ + palSetPad(GPIOB, GPIOB_LED4); + chSysLockFromISR(); + chVTResetI(&vt2); + chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); + chSysUnlockFromISR(); +} + +/* + * This callback is invoked when a receive buffer has been completely written. + */ +static void rxend(UARTDriver *uartp) { + + (void)uartp; +} + +/* + * UART driver configuration structure. + */ +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + rxend, + rxchar, + rxerr, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 1, PA9 and PA10 are routed to USART1. + */ + uartStart(&UARTD1, &uart_cfg_1); + palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); + palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); + + /* + * Starts the transmission, it will be handled entirely in background. + */ + uartStartSend(&UARTD1, 13, "Starting...\r\n"); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } +} diff --git a/testhal/STM32/STM32L1xx/UART/mcuconf.h b/testhal/STM32/STM32L1xx/UART/mcuconf.h new file mode 100644 index 000000000..77c9df342 --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/mcuconf.h @@ -0,0 +1,177 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L1xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32L1xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED TRUE +#define STM32_ADC_CLOCK_ENABLED TRUE +#define STM32_USB_CLOCK_ENABLED TRUE +#define STM32_MSIRANGE STM32_MSIRANGE_2M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI +#define STM32_PLLMUL_VALUE 6 +#define STM32_PLLDIV_VALUE 3 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_RTCSEL STM32_RTCSEL_LSE +#define STM32_RTCPRE STM32_RTCPRE_DIV2 +#define STM32_VOS STM32_VOS_1P8 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 TRUE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32/STM32L1xx/UART/readme.txt b/testhal/STM32/STM32L1xx/UART/readme.txt new file mode 100644 index 000000000..5f3edb851 --- /dev/null +++ b/testhal/STM32/STM32L1xx/UART/readme.txt @@ -0,0 +1,32 @@ +***************************************************************************** +** ChibiOS/RT HAL - UART driver demo for STM32L1xx. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32L-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32L1xx UART driver. + +** Board Setup ** + +- Remove the LCD module. +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com diff --git a/testhal/STM32F0xx/ADC/.cproject b/testhal/STM32F0xx/ADC/.cproject deleted file mode 100644 index 6398488ab..000000000 --- a/testhal/STM32F0xx/ADC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/ADC/.project b/testhal/STM32F0xx/ADC/.project deleted file mode 100644 index 7c94c96a4..000000000 --- a/testhal/STM32F0xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/ADC/Makefile b/testhal/STM32F0xx/ADC/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/ADC/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/ADC/chconf.h b/testhal/STM32F0xx/ADC/chconf.h deleted file mode 100644 index 89abbc2dc..000000000 --- a/testhal/STM32F0xx/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/ADC/halconf.h b/testhal/STM32F0xx/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F0xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/ADC/main.c b/testhal/STM32F0xx/ADC/main.c deleted file mode 100644 index 86eb71780..000000000 --- a/testhal/STM32F0xx/ADC/main.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 4 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - ADC_CFGR1_RES_12BIT, /* CFGRR1 */ - ADC_TR(0, 0), /* TR */ - ADC_SMPR_SMP_1P5, /* SMPR */ - ADC_CHSELR_CHSEL10 /* CHSELR */ -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - ADC_CFGR1_RES_12BIT, /* CFGRR1 */ - ADC_TR(0, 0), /* TR */ - ADC_SMPR_SMP_28P5, /* SMPR */ - ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL11 | - ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17 /* CHSELR */ -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED4); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED4); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32SetCCR(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32SetCCR(0); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F0xx/ADC/mcuconf.h b/testhal/STM32F0xx/ADC/mcuconf.h deleted file mode 100644 index 652af90a1..000000000 --- a/testhal/STM32F0xx/ADC/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/ADC/readme.txt b/testhal/STM32F0xx/ADC/readme.txt deleted file mode 100644 index 704ffb1a6..000000000 --- a/testhal/STM32F0xx/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx ADC driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PC0 to 3.3V and PC1 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/EXT/.cproject b/testhal/STM32F0xx/EXT/.cproject deleted file mode 100644 index ad1273b16..000000000 --- a/testhal/STM32F0xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/EXT/.project b/testhal/STM32F0xx/EXT/.project deleted file mode 100644 index bae993cd8..000000000 --- a/testhal/STM32F0xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/EXT/Makefile b/testhal/STM32F0xx/EXT/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/EXT/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/EXT/chconf.h b/testhal/STM32F0xx/EXT/chconf.h deleted file mode 100644 index 0e7bac72f..000000000 --- a/testhal/STM32F0xx/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/EXT/halconf.h b/testhal/STM32F0xx/EXT/halconf.h deleted file mode 100644 index 5b67db37b..000000000 --- a/testhal/STM32F0xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/EXT/main.c b/testhal/STM32F0xx/EXT/main.c deleted file mode 100644 index 2fdcc247e..000000000 --- a/testhal/STM32F0xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOC, GPIOC_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOC, GPIOC_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F0xx/EXT/mcuconf.h b/testhal/STM32F0xx/EXT/mcuconf.h deleted file mode 100644 index df3f85580..000000000 --- a/testhal/STM32F0xx/EXT/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/EXT/readme.txt b/testhal/STM32F0xx/EXT/readme.txt deleted file mode 100644 index 542fc577e..000000000 --- a/testhal/STM32F0xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/IRQ_STORM/.cproject b/testhal/STM32F0xx/IRQ_STORM/.cproject deleted file mode 100644 index 8c3040aad..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/IRQ_STORM/.project b/testhal/STM32F0xx/IRQ_STORM/.project deleted file mode 100644 index 8c63b9bf4..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/IRQ_STORM/Makefile b/testhal/STM32F0xx/IRQ_STORM/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/IRQ_STORM/chconf.h b/testhal/STM32F0xx/IRQ_STORM/chconf.h deleted file mode 100644 index 1b81d6805..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/IRQ_STORM/halconf.h b/testhal/STM32F0xx/IRQ_STORM/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/IRQ_STORM/main.c b/testhal/STM32F0xx/IRQ_STORM/main.c deleted file mode 100644 index 22baf6e62..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/main.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED4); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 1 and GPT drivers 2 and 3. - */ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ - gptStart(&GPTD1, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h b/testhal/STM32F0xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 2a9c91850..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 1 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/IRQ_STORM/readme.txt b/testhal/STM32F0xx/IRQ_STORM/readme.txt deleted file mode 100644 index e56547a46..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/PWM-ICU/.cproject b/testhal/STM32F0xx/PWM-ICU/.cproject deleted file mode 100644 index e2fc31de7..000000000 --- a/testhal/STM32F0xx/PWM-ICU/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/PWM-ICU/.project b/testhal/STM32F0xx/PWM-ICU/.project deleted file mode 100644 index 021a42109..000000000 --- a/testhal/STM32F0xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/PWM-ICU/Makefile b/testhal/STM32F0xx/PWM-ICU/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/PWM-ICU/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/PWM-ICU/chconf.h b/testhal/STM32F0xx/PWM-ICU/chconf.h deleted file mode 100644 index 0e7bac72f..000000000 --- a/testhal/STM32F0xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/PWM-ICU/halconf.h b/testhal/STM32F0xx/PWM-ICU/halconf.h deleted file mode 100644 index c1a492c2d..000000000 --- a/testhal/STM32F0xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/PWM-ICU/main.c b/testhal/STM32F0xx/PWM-ICU/main.c deleted file mode 100644 index fa4c4de8c..000000000 --- a/testhal/STM32F0xx/PWM-ICU/main.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOC, GPIOC_LED4); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOC, GPIOC_LED4); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOC, GPIOC_LED3); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOC, GPIOC_LED3); - last_period = icuGetPeriod(icup); -} - -static void icuoverflowcb(ICUDriver *icup) { - - (void)icup; -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - icuoverflowcb, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA6 is the ICU input (CH1). - * GPIOA8 is the PWM output (CH1). - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD1, &pwmcfg); - palSetPadMode(GPIOA, 8, PAL_MODE_ALTERNATE(2)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD1, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOC, GPIOC_LED3); - palClearPad(GPIOC, GPIOC_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F0xx/PWM-ICU/mcuconf.h b/testhal/STM32F0xx/PWM-ICU/mcuconf.h deleted file mode 100644 index b4678a1f6..000000000 --- a/testhal/STM32F0xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/PWM-ICU/readme.txt b/testhal/STM32F0xx/PWM-ICU/readme.txt deleted file mode 100644 index a0c549b3b..000000000 --- a/testhal/STM32F0xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx PWM-ICU drivers. - -** Board Setup ** - -- Connect PA8 and PA6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/SPI/.cproject b/testhal/STM32F0xx/SPI/.cproject deleted file mode 100644 index dd317e872..000000000 --- a/testhal/STM32F0xx/SPI/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/SPI/.project b/testhal/STM32F0xx/SPI/.project deleted file mode 100644 index 1e19b44f3..000000000 --- a/testhal/STM32F0xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/SPI/Makefile b/testhal/STM32F0xx/SPI/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/SPI/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/SPI/chconf.h b/testhal/STM32F0xx/SPI/chconf.h deleted file mode 100644 index 0e7bac72f..000000000 --- a/testhal/STM32F0xx/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/SPI/halconf.h b/testhal/STM32F0xx/SPI/halconf.h deleted file mode 100644 index 99f546dd1..000000000 --- a/testhal/STM32F0xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/SPI/main.c b/testhal/STM32F0xx/SPI/main.c deleted file mode 100644 index 5c0226b94..000000000 --- a/testhal/STM32F0xx/SPI/main.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOC, GPIOC_LED4); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOC, GPIOC_LED4); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED3); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED3); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPad(GPIOB, 12); - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F0xx/SPI/mcuconf.h b/testhal/STM32F0xx/SPI/mcuconf.h deleted file mode 100644 index 33146eb6a..000000000 --- a/testhal/STM32F0xx/SPI/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/SPI/readme.txt b/testhal/STM32F0xx/SPI/readme.txt deleted file mode 100644 index 636a7c248..000000000 --- a/testhal/STM32F0xx/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/UART/.cproject b/testhal/STM32F0xx/UART/.cproject deleted file mode 100644 index 46c45aefc..000000000 --- a/testhal/STM32F0xx/UART/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/UART/.project b/testhal/STM32F0xx/UART/.project deleted file mode 100644 index 03d8ce7d4..000000000 --- a/testhal/STM32F0xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/UART/Makefile b/testhal/STM32F0xx/UART/Makefile deleted file mode 100644 index ab318e781..000000000 --- a/testhal/STM32F0xx/UART/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f0xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F0xx/UART/chconf.h b/testhal/STM32F0xx/UART/chconf.h deleted file mode 100644 index 0e7bac72f..000000000 --- a/testhal/STM32F0xx/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/UART/halconf.h b/testhal/STM32F0xx/UART/halconf.h deleted file mode 100644 index e9b103442..000000000 --- a/testhal/STM32F0xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/UART/main.c b/testhal/STM32F0xx/UART/main.c deleted file mode 100644 index 9df75bb9d..000000000 --- a/testhal/STM32F0xx/UART/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOC, GPIOC_LED4); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED4); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOC, GPIOC_LED4); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOC, GPIOC_LED4); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F0xx/UART/mcuconf.h b/testhal/STM32F0xx/UART/mcuconf.h deleted file mode 100644 index 1fd22d532..000000000 --- a/testhal/STM32F0xx/UART/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") diff --git a/testhal/STM32F0xx/UART/readme.txt b/testhal/STM32F0xx/UART/readme.txt deleted file mode 100644 index 921f1bc8e..000000000 --- a/testhal/STM32F0xx/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/ADC/.cproject b/testhal/STM32F1xx/ADC/.cproject deleted file mode 100644 index 96718979f..000000000 --- a/testhal/STM32F1xx/ADC/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/ADC/.project b/testhal/STM32F1xx/ADC/.project deleted file mode 100644 index b0614142a..000000000 --- a/testhal/STM32F1xx/ADC/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/ADC/Makefile b/testhal/STM32F1xx/ADC/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/ADC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/ADC/chconf.h b/testhal/STM32F1xx/ADC/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/ADC/halconf.h b/testhal/STM32F1xx/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F1xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/ADC/main.c b/testhal/STM32F1xx/ADC/main.c deleted file mode 100644 index 3fcbafbfc..000000000 --- a/testhal/STM32F1xx/ADC/main.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, 0, /* CR1, CR2 */ - ADC_SMPR1_SMP_AN10(ADC_SAMPLE_1P5), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, /* SQR2 */ - ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, ADC_CR2_TSVREFE, /* CR1, CR2 */ - ADC_SMPR1_SMP_AN11(ADC_SAMPLE_41P5) | ADC_SMPR1_SMP_AN10(ADC_SAMPLE_41P5) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN10) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN10) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) - adcStopConversion(&ADCD1); - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/ADC/mcuconf.h b/testhal/STM32F1xx/ADC/mcuconf.h deleted file mode 100644 index 8ca927071..000000000 --- a/testhal/STM32F1xx/ADC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/ADC/readme.txt b/testhal/STM32F1xx/ADC/readme.txt deleted file mode 100644 index 1502425f4..000000000 --- a/testhal/STM32F1xx/ADC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 ADC driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/CAN/.cproject b/testhal/STM32F1xx/CAN/.cproject deleted file mode 100644 index bac08e768..000000000 --- a/testhal/STM32F1xx/CAN/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/CAN/.project b/testhal/STM32F1xx/CAN/.project deleted file mode 100644 index bd246b63d..000000000 --- a/testhal/STM32F1xx/CAN/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/CAN/Makefile b/testhal/STM32F1xx/CAN/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/CAN/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/CAN/chconf.h b/testhal/STM32F1xx/CAN/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/CAN/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/CAN/halconf.h b/testhal/STM32F1xx/CAN/halconf.h deleted file mode 100644 index a1195d7e1..000000000 --- a/testhal/STM32F1xx/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/CAN/main.c b/testhal/STM32F1xx/CAN/main.c deleted file mode 100644 index 39fdc29ae..000000000 --- a/testhal/STM32F1xx/CAN/main.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - * See section 22.7.7 on the STM32 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static THD_WORKING_AREA(can_rx_wa, 256); -static THD_FUNCTION(can_rx, p) { - event_listener_t el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminateX()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { - /* Process message.*/ - palTogglePad(IOPORT3, GPIOC_LED); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static THD_WORKING_AREA(can_tx_wa, 256); -static THD_FUNCTION(can_tx, p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminateX()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/CAN/mcuconf.h b/testhal/STM32F1xx/CAN/mcuconf.h deleted file mode 100644 index 39cf40780..000000000 --- a/testhal/STM32F1xx/CAN/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/CAN/readme.txt b/testhal/STM32F1xx/CAN/readme.txt deleted file mode 100644 index b78112885..000000000 --- a/testhal/STM32F1xx/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/EXT/.cproject b/testhal/STM32F1xx/EXT/.cproject deleted file mode 100644 index 5afcfb4ad..000000000 --- a/testhal/STM32F1xx/EXT/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/EXT/.project b/testhal/STM32F1xx/EXT/.project deleted file mode 100644 index 41d3deffa..000000000 --- a/testhal/STM32F1xx/EXT/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/EXT/Makefile b/testhal/STM32F1xx/EXT/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/EXT/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/EXT/chconf.h b/testhal/STM32F1xx/EXT/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/EXT/halconf.h b/testhal/STM32F1xx/EXT/halconf.h deleted file mode 100644 index 5b67db37b..000000000 --- a/testhal/STM32F1xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/EXT/main.c b/testhal/STM32F1xx/EXT/main.c deleted file mode 100644 index 1ca4260d0..000000000 --- a/testhal/STM32F1xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt; - -/* LED set to OFF after 200mS.*/ -static void ledoff(void *arg) { - - (void)arg; - palSetPad(GPIOC, GPIOC_LED); -} - -/* Triggered when the button is pressed or released. The LED is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; - palClearPad(GPIOC, GPIOC_LED); - chSysLockFromISR(); - chVTSetI(&vt, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* Triggered when the LED goes OFF.*/ -static void extcb2(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F1xx/EXT/mcuconf.h b/testhal/STM32F1xx/EXT/mcuconf.h deleted file mode 100644 index b261fb50d..000000000 --- a/testhal/STM32F1xx/EXT/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/EXT/readme.txt b/testhal/STM32F1xx/EXT/readme.txt deleted file mode 100644 index 48288c565..000000000 --- a/testhal/STM32F1xx/EXT/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 EXT driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/IRQ_STORM/.cproject b/testhal/STM32F1xx/IRQ_STORM/.cproject deleted file mode 100644 index 34b2612a8..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/IRQ_STORM/.project b/testhal/STM32F1xx/IRQ_STORM/.project deleted file mode 100644 index 8a26197ea..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/IRQ_STORM/Makefile b/testhal/STM32F1xx/IRQ_STORM/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/IRQ_STORM/chconf.h b/testhal/STM32F1xx/IRQ_STORM/chconf.h deleted file mode 100644 index a1efc5bbf..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/IRQ_STORM/halconf.h b/testhal/STM32F1xx/IRQ_STORM/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/IRQ_STORM/main.c b/testhal/STM32F1xx/IRQ_STORM/main.c deleted file mode 100644 index 51806a45b..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/main.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2. - */ - sdStart(&SD2, NULL); - - /* - * Activates GPTs. - */ - gptStart(&GPTD4, &gpt4cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F1xx/IRQ_STORM/mcuconf.h b/testhal/STM32F1xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index ae5c645da..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 6 -#define STM32_GPT_TIM4_IRQ_PRIORITY 10 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/IRQ_STORM/readme.txt b/testhal/STM32F1xx/IRQ_STORM/readme.txt deleted file mode 100644 index 32f5a3781..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ-STORM demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32F1xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/PWM-ICU/.cproject b/testhal/STM32F1xx/PWM-ICU/.cproject deleted file mode 100644 index b98eb835e..000000000 --- a/testhal/STM32F1xx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/PWM-ICU/.project b/testhal/STM32F1xx/PWM-ICU/.project deleted file mode 100644 index dc64cb828..000000000 --- a/testhal/STM32F1xx/PWM-ICU/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/PWM-ICU/Makefile b/testhal/STM32F1xx/PWM-ICU/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/PWM-ICU/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/PWM-ICU/chconf.h b/testhal/STM32F1xx/PWM-ICU/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/PWM-ICU/halconf.h b/testhal/STM32F1xx/PWM-ICU/halconf.h deleted file mode 100644 index c1a492c2d..000000000 --- a/testhal/STM32F1xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/PWM-ICU/main.c b/testhal/STM32F1xx/PWM-ICU/main.c deleted file mode 100644 index eecd5b2ad..000000000 --- a/testhal/STM32F1xx/PWM-ICU/main.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(IOPORT3, GPIOC_LED); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(IOPORT3, GPIOC_LED); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0, -#if STM32_PWM_USE_ADVANCED - 0 -#endif -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * LED initially off. - */ - palSetPad(IOPORT3, GPIOC_LED); - - /* - * Initializes the PWM driver 1 and ICU driver 4. - */ - pwmStart(&PWMD1, &pwmcfg); - palSetPadMode(IOPORT1, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - icuStart(&ICUD4, &icucfg); - icuEnable(&ICUD4); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD1, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD4); - icuStop(&ICUD4); - palSetPad(IOPORT3, GPIOC_LED); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/PWM-ICU/mcuconf.h b/testhal/STM32F1xx/PWM-ICU/mcuconf.h deleted file mode 100644 index f0963d15c..000000000 --- a/testhal/STM32F1xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED TRUE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/PWM-ICU/readme.txt b/testhal/STM32F1xx/PWM-ICU/readme.txt deleted file mode 100644 index 55ffef2cf..000000000 --- a/testhal/STM32F1xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,28 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM/ICU driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 PWM and ICU drivers. Pins -PA8 and PB6 must be connected in order to trigger the ICU input with the -PWM output. The ICU unit will measure the generated PWM. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/SPI/.cproject b/testhal/STM32F1xx/SPI/.cproject deleted file mode 100644 index 09884e9c6..000000000 --- a/testhal/STM32F1xx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/SPI/.project b/testhal/STM32F1xx/SPI/.project deleted file mode 100644 index 427a9f4a5..000000000 --- a/testhal/STM32F1xx/SPI/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/SPI/Makefile b/testhal/STM32F1xx/SPI/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/SPI/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/SPI/chconf.h b/testhal/STM32F1xx/SPI/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SPI/halconf.h b/testhal/STM32F1xx/SPI/halconf.h deleted file mode 100644 index 5782fe449..000000000 --- a/testhal/STM32F1xx/SPI/halconf.h +++ /dev/null @@ -1,311 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SPI/main.c b/testhal/STM32F1xx/SPI/main.c deleted file mode 100644 index 674d5d284..000000000 --- a/testhal/STM32F1xx/SPI/main.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOA, - GPIOA_SPI1NSS, - 0 -}; - -/* - * Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOA, - GPIOA_SPI1NSS, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) { - - (void)p; - - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(IOPORT3, GPIOC_LED); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) { - - (void)p; - - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(IOPORT3, GPIOC_LED); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI1 I/O pins setup. - */ - palSetPadMode(IOPORT1, 5, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* SCK. */ - palSetPadMode(IOPORT1, 6, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MISO.*/ - palSetPadMode(IOPORT1, 7, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MOSI.*/ - palSetPadMode(IOPORT1, GPIOA_SPI1NSS, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(IOPORT1, GPIOA_SPI1NSS); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/SPI/mcuconf.h b/testhal/STM32F1xx/SPI/mcuconf.h deleted file mode 100644 index 5de132afa..000000000 --- a/testhal/STM32F1xx/SPI/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/SPI/readme.txt b/testhal/STM32F1xx/SPI/readme.txt deleted file mode 100644 index 1a9c90b47..000000000 --- a/testhal/STM32F1xx/SPI/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 SPI driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/UART/.cproject b/testhal/STM32F1xx/UART/.cproject deleted file mode 100644 index f3228a9e5..000000000 --- a/testhal/STM32F1xx/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/UART/.project b/testhal/STM32F1xx/UART/.project deleted file mode 100644 index dae6d5690..000000000 --- a/testhal/STM32F1xx/UART/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F1xx/UART/Makefile b/testhal/STM32F1xx/UART/Makefile deleted file mode 100644 index 59c540dfd..000000000 --- a/testhal/STM32F1xx/UART/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/UART/chconf.h b/testhal/STM32F1xx/UART/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/UART/halconf.h b/testhal/STM32F1xx/UART/halconf.h deleted file mode 100644 index e9b103442..000000000 --- a/testhal/STM32F1xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/UART/main.c b/testhal/STM32F1xx/UART/main.c deleted file mode 100644 index 526125df2..000000000 --- a/testhal/STM32F1xx/UART/main.c +++ /dev/null @@ -1,145 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - - palSetPad(IOPORT3, GPIOC_LED); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - - palClearPad(IOPORT3, GPIOC_LED); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - - palSetPad(IOPORT3, GPIOC_LED); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - - /* Flashing the LED each time a character is received.*/ - palClearPad(IOPORT3, GPIOC_LED); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2 using the driver default configuration. - */ - uartStart(&UARTD2, &uart_cfg_1); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD2, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/UART/mcuconf.h b/testhal/STM32F1xx/UART/mcuconf.h deleted file mode 100644 index 10c0684ee..000000000 --- a/testhal/STM32F1xx/UART/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/UART/readme.txt b/testhal/STM32F1xx/UART/readme.txt deleted file mode 100644 index e24a2c568..000000000 --- a/testhal/STM32F1xx/UART/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 UART driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/USB_CDC/.cproject b/testhal/STM32F1xx/USB_CDC/.cproject deleted file mode 100644 index e949fc6a0..000000000 --- a/testhal/STM32F1xx/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/USB_CDC/.project b/testhal/STM32F1xx/USB_CDC/.project deleted file mode 100644 index cf2fef72d..000000000 --- a/testhal/STM32F1xx/USB_CDC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F1xx-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F1xx/USB_CDC/Makefile b/testhal/STM32F1xx/USB_CDC/Makefile deleted file mode 100644 index 1f9924734..000000000 --- a/testhal/STM32F1xx/USB_CDC/Makefile +++ /dev/null @@ -1,205 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT = $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F1xx/USB_CDC/chconf.h b/testhal/STM32F1xx/USB_CDC/chconf.h deleted file mode 100644 index 49a557804..000000000 --- a/testhal/STM32F1xx/USB_CDC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC/halconf.h b/testhal/STM32F1xx/USB_CDC/halconf.h deleted file mode 100644 index 09a9a0cdb..000000000 --- a/testhal/STM32F1xx/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC/main.c b/testhal/STM32F1xx/USB_CDC/main.c deleted file mode 100644 index 38dc09260..000000000 --- a/testhal/STM32F1xx/USB_CDC/main.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F1xx/USB_CDC/mcuconf.h b/testhal/STM32F1xx/USB_CDC/mcuconf.h deleted file mode 100644 index 3d82f8d46..000000000 --- a/testhal/STM32F1xx/USB_CDC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/USB_CDC/readme.txt b/testhal/STM32F1xx/USB_CDC/readme.txt deleted file mode 100644 index 2d71df64f..000000000 --- a/testhal/STM32F1xx/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/USB_CDC_F107/.cproject b/testhal/STM32F1xx/USB_CDC_F107/.cproject deleted file mode 100644 index e5f35ee12..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/USB_CDC_F107/.project b/testhal/STM32F1xx/USB_CDC_F107/.project deleted file mode 100644 index cdd1937af..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/.project +++ /dev/null @@ -1,95 +0,0 @@ - - - TEST-STM32F1xx-USB_CDC_F107 - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/OLIMEX_STM32_P107 - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F1xx/USB_CDC_F107/Makefile b/testhal/STM32F1xx/USB_CDC_F107/Makefile deleted file mode 100644 index 8edd271fb..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform_f105_f107.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F107xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/USB_CDC_F107/chconf.h b/testhal/STM32F1xx/USB_CDC_F107/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC_F107/halconf.h b/testhal/STM32F1xx/USB_CDC_F107/halconf.h deleted file mode 100644 index bb8ebc123..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC_F107/main.c b/testhal/STM32F1xx/USB_CDC_F107/main.c deleted file mode 100644 index 8dda559c0..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/main.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(IOPORT3, GPIOC_LED_STATUS1); - chThdSleepMilliseconds(time); - palSetPad(IOPORT3, GPIOC_LED_STATUS1); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h b/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h deleted file mode 100644 index 5b6ba6683..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F107 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F107_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_PREDIV1 -#define STM32_PREDIV1SRC STM32_PREDIV1SRC_PLL2 -#define STM32_PREDIV1_VALUE 5 -#define STM32_PLLMUL_VALUE 9 -#define STM32_PREDIV2_VALUE 5 -#define STM32_PLL2MUL_VALUE 8 -#define STM32_PLL3MUL_VALUE 10 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_OTG_CLOCK_REQUIRED TRUE -#define STM32_OTGFSPRE STM32_OTGFSPRE_DIV3 -#define STM32_I2S_CLOCK_REQUIRED FALSE -#define STM32_MCOSEL STM32_MCOSEL_PLL3 -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F1xx/USB_CDC_F107/readme.txt b/testhal/STM32F1xx/USB_CDC_F107/readme.txt deleted file mode 100644 index 43098d8ac..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P107 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB (OTG) driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/ADC/.cproject b/testhal/STM32F30x/ADC/.cproject deleted file mode 100644 index 7a8791dfc..000000000 --- a/testhal/STM32F30x/ADC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/ADC/.project b/testhal/STM32F30x/ADC/.project deleted file mode 100644 index 9503708ca..000000000 --- a/testhal/STM32F30x/ADC/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/ADC/Makefile b/testhal/STM32F30x/ADC/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/ADC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/ADC/chconf.h b/testhal/STM32F30x/ADC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC/halconf.h b/testhal/STM32F30x/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F30x/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC/main.c b/testhal/STM32F30x/ADC/main.c deleted file mode 100644 index 9306b14d1..000000000 --- a/testhal/STM32F30x/ADC/main.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN7, IN8. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - 0, /* CCR */ - { /* SMPR[2] */ - 0, - 0 - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), - 0, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), - 0, - 0 - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/ADC/mcuconf.h b/testhal/STM32F30x/ADC/mcuconf.h deleted file mode 100644 index 7838058a0..000000000 --- a/testhal/STM32F30x/ADC/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/ADC/readme.txt b/testhal/STM32F30x/ADC/readme.txt deleted file mode 100644 index bc0a30424..000000000 --- a/testhal/STM32F30x/ADC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/ADC_DUAL/.cproject b/testhal/STM32F30x/ADC_DUAL/.cproject deleted file mode 100644 index 980f2e991..000000000 --- a/testhal/STM32F30x/ADC_DUAL/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/ADC_DUAL/.project b/testhal/STM32F30x/ADC_DUAL/.project deleted file mode 100644 index 86fadf546..000000000 --- a/testhal/STM32F30x/ADC_DUAL/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-ADC_DUAL - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/ADC_DUAL/Makefile b/testhal/STM32F30x/ADC_DUAL/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/ADC_DUAL/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/ADC_DUAL/chconf.h b/testhal/STM32F30x/ADC_DUAL/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/ADC_DUAL/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC_DUAL/halconf.h b/testhal/STM32F30x/ADC_DUAL/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F30x/ADC_DUAL/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC_DUAL/main.c b/testhal/STM32F30x/ADC_DUAL/main.c deleted file mode 100644 index 849207de0..000000000 --- a/testhal/STM32F30x/ADC_DUAL/main.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 4 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 16 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN7, IN8. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_DUAL(1), /* CCR */ - { /* SMPR[2] */ - 0, - 0 - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), - 0, - 0, - 0 - }, - { /* SSMPR[2] */ - 0, - 0 - }, - { /* SSQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7), - 0, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_DUAL(1) | ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), - 0, - 0 - }, - { /* SSMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SSQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN7), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN8) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN7) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN17) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN16), - 0, - 0 - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/ADC_DUAL/mcuconf.h b/testhal/STM32F30x/ADC_DUAL/mcuconf.h deleted file mode 100644 index 3468f7e92..000000000 --- a/testhal/STM32F30x/ADC_DUAL/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE TRUE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/ADC_DUAL/readme.txt b/testhal/STM32F30x/ADC_DUAL/readme.txt deleted file mode 100644 index bc0a30424..000000000 --- a/testhal/STM32F30x/ADC_DUAL/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/CAN/.cproject b/testhal/STM32F30x/CAN/.cproject deleted file mode 100644 index e18f952ce..000000000 --- a/testhal/STM32F30x/CAN/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/CAN/.project b/testhal/STM32F30x/CAN/.project deleted file mode 100644 index 03f4bead6..000000000 --- a/testhal/STM32F30x/CAN/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/CAN/Makefile b/testhal/STM32F30x/CAN/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/CAN/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/CAN/chconf.h b/testhal/STM32F30x/CAN/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/CAN/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/CAN/halconf.h b/testhal/STM32F30x/CAN/halconf.h deleted file mode 100644 index a1195d7e1..000000000 --- a/testhal/STM32F30x/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/CAN/main.c b/testhal/STM32F30x/CAN/main.c deleted file mode 100644 index 27ba16bf7..000000000 --- a/testhal/STM32F30x/CAN/main.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static THD_WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - event_listener_t el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminateX()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { - /* Process message.*/ - palTogglePad(GPIOE, GPIOE_LED3_RED); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static THD_WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminateX()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/CAN/mcuconf.h b/testhal/STM32F30x/CAN/mcuconf.h deleted file mode 100644 index 86e830fe2..000000000 --- a/testhal/STM32F30x/CAN/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/CAN/readme.txt b/testhal/STM32F30x/CAN/readme.txt deleted file mode 100644 index 983b34d1d..000000000 --- a/testhal/STM32F30x/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/EXT/.cproject b/testhal/STM32F30x/EXT/.cproject deleted file mode 100644 index c9c383d84..000000000 --- a/testhal/STM32F30x/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/EXT/.project b/testhal/STM32F30x/EXT/.project deleted file mode 100644 index 1504226d3..000000000 --- a/testhal/STM32F30x/EXT/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/EXT/Makefile b/testhal/STM32F30x/EXT/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/EXT/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/EXT/chconf.h b/testhal/STM32F30x/EXT/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/EXT/halconf.h b/testhal/STM32F30x/EXT/halconf.h deleted file mode 100644 index 5b67db37b..000000000 --- a/testhal/STM32F30x/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/EXT/main.c b/testhal/STM32F30x/EXT/main.c deleted file mode 100644 index bd8b4359c..000000000 --- a/testhal/STM32F30x/EXT/main.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOE, GPIOE_LED10_RED); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOE, GPIOE_LED10_RED); - chSysLockFromISR(); - - /* Timer reset, if still active.*/ - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F30x/EXT/mcuconf.h b/testhal/STM32F30x/EXT/mcuconf.h deleted file mode 100644 index abb99ae10..000000000 --- a/testhal/STM32F30x/EXT/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/EXT/readme.txt b/testhal/STM32F30x/EXT/readme.txt deleted file mode 100644 index 39255526b..000000000 --- a/testhal/STM32F30x/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/IRQ_STORM/.cproject b/testhal/STM32F30x/IRQ_STORM/.cproject deleted file mode 100644 index e59cf38b3..000000000 --- a/testhal/STM32F30x/IRQ_STORM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/IRQ_STORM/.project b/testhal/STM32F30x/IRQ_STORM/.project deleted file mode 100644 index c3e2f6a31..000000000 --- a/testhal/STM32F30x/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F30x-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/IRQ_STORM/Makefile b/testhal/STM32F30x/IRQ_STORM/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/IRQ_STORM/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/IRQ_STORM/chconf.h b/testhal/STM32F30x/IRQ_STORM/chconf.h deleted file mode 100644 index 7ff9a1440..000000000 --- a/testhal/STM32F30x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/IRQ_STORM/halconf.h b/testhal/STM32F30x/IRQ_STORM/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F30x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/IRQ_STORM/main.c b/testhal/STM32F30x/IRQ_STORM/main.c deleted file mode 100644 index 89d688016..000000000 --- a/testhal/STM32F30x/IRQ_STORM/main.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOE, GPIOE_LED10_RED); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* - * Activates GPTs. - */ - gptStart(&GPTD4, &gpt4cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F30x/IRQ_STORM/mcuconf.h b/testhal/STM32F30x/IRQ_STORM/mcuconf.h deleted file mode 100644 index 082f71c8f..000000000 --- a/testhal/STM32F30x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/IRQ_STORM/readme.txt b/testhal/STM32F30x/IRQ_STORM/readme.txt deleted file mode 100644 index 5193c5f89..000000000 --- a/testhal/STM32F30x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/PWM-ICU/.cproject b/testhal/STM32F30x/PWM-ICU/.cproject deleted file mode 100644 index 94e436ca4..000000000 --- a/testhal/STM32F30x/PWM-ICU/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/PWM-ICU/.project b/testhal/STM32F30x/PWM-ICU/.project deleted file mode 100644 index d8190d4c4..000000000 --- a/testhal/STM32F30x/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F30x-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/PWM-ICU/Makefile b/testhal/STM32F30x/PWM-ICU/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/PWM-ICU/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/PWM-ICU/chconf.h b/testhal/STM32F30x/PWM-ICU/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/PWM-ICU/halconf.h b/testhal/STM32F30x/PWM-ICU/halconf.h deleted file mode 100644 index c1a492c2d..000000000 --- a/testhal/STM32F30x/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/PWM-ICU/main.c b/testhal/STM32F30x/PWM-ICU/main.c deleted file mode 100644 index 96444baef..000000000 --- a/testhal/STM32F30x/PWM-ICU/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOE, GPIOE_LED4_BLUE); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOE, GPIOE_LED4_BLUE); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOE, GPIOE_LED9_BLUE); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOE, GPIOE_LED9_BLUE); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 4 and ICU driver 3. - * GPIOD12 is the PWM output channel 0. - * GPIOC6 is the ICU input ICU_CHANNEL_1. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD4, &pwmcfg); - palSetPadMode(GPIOD, 12, PAL_MODE_ALTERNATE(2)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD4, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD4, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD4, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD4, 0); - pwmStop(&PWMD4); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOE, GPIOE_LED4_BLUE); - palClearPad(GPIOE, GPIOE_LED9_BLUE); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/PWM-ICU/mcuconf.h b/testhal/STM32F30x/PWM-ICU/mcuconf.h deleted file mode 100644 index bb59d7e27..000000000 --- a/testhal/STM32F30x/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 TRUE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 TRUE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 TRUE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/PWM-ICU/readme.txt b/testhal/STM32F30x/PWM-ICU/readme.txt deleted file mode 100644 index bf4069267..000000000 --- a/testhal/STM32F30x/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x PWM-ICU drivers. - -** Board Setup ** - -- Connect PD12 (PWM output) and PC6 (ICU input) together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/SPI/.cproject b/testhal/STM32F30x/SPI/.cproject deleted file mode 100644 index 697309c7f..000000000 --- a/testhal/STM32F30x/SPI/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/SPI/.project b/testhal/STM32F30x/SPI/.project deleted file mode 100644 index 5c0b3a88c..000000000 --- a/testhal/STM32F30x/SPI/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/SPI/Makefile b/testhal/STM32F30x/SPI/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/SPI/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/SPI/chconf.h b/testhal/STM32F30x/SPI/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/SPI/halconf.h b/testhal/STM32F30x/SPI/halconf.h deleted file mode 100644 index 99f546dd1..000000000 --- a/testhal/STM32F30x/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/SPI/main.c b/testhal/STM32F30x/SPI/main.c deleted file mode 100644 index 84c870354..000000000 --- a/testhal/STM32F30x/SPI/main.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOE, GPIOE_LED10_RED); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOE, GPIOE_LED10_RED);/* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/SPI/mcuconf.h b/testhal/STM32F30x/SPI/mcuconf.h deleted file mode 100644 index 8ba3d4ea8..000000000 --- a/testhal/STM32F30x/SPI/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/SPI/readme.txt b/testhal/STM32F30x/SPI/readme.txt deleted file mode 100644 index 9275c06ee..000000000 --- a/testhal/STM32F30x/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/UART/.cproject b/testhal/STM32F30x/UART/.cproject deleted file mode 100644 index 813ef9678..000000000 --- a/testhal/STM32F30x/UART/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/UART/.project b/testhal/STM32F30x/UART/.project deleted file mode 100644 index 15900d6dc..000000000 --- a/testhal/STM32F30x/UART/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/UART/Makefile b/testhal/STM32F30x/UART/Makefile deleted file mode 100644 index 46e438ab8..000000000 --- a/testhal/STM32F30x/UART/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/UART/chconf.h b/testhal/STM32F30x/UART/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/UART/halconf.h b/testhal/STM32F30x/UART/halconf.h deleted file mode 100644 index e9b103442..000000000 --- a/testhal/STM32F30x/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/UART/main.c b/testhal/STM32F30x/UART/main.c deleted file mode 100644 index 170f14f20..000000000 --- a/testhal/STM32F30x/UART/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOE, GPIOE_LED3_RED); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOE, GPIOE_LED3_RED); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOE, GPIOE_LED3_RED); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOE, GPIOE_LED3_RED); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/UART/mcuconf.h b/testhal/STM32F30x/UART/mcuconf.h deleted file mode 100644 index f3ebfcc2a..000000000 --- a/testhal/STM32F30x/UART/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/UART/readme.txt b/testhal/STM32F30x/UART/readme.txt deleted file mode 100644 index 3f55599a8..000000000 --- a/testhal/STM32F30x/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/USB_CDC/.cproject b/testhal/STM32F30x/USB_CDC/.cproject deleted file mode 100644 index 49ee0dcf1..000000000 --- a/testhal/STM32F30x/USB_CDC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/USB_CDC/.project b/testhal/STM32F30x/USB_CDC/.project deleted file mode 100644 index 9c8e08513..000000000 --- a/testhal/STM32F30x/USB_CDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F30x-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F30x/USB_CDC/Makefile b/testhal/STM32F30x/USB_CDC/Makefile deleted file mode 100644 index 268398918..000000000 --- a/testhal/STM32F30x/USB_CDC/Makefile +++ /dev/null @@ -1,205 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f30x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F30x/USB_CDC/chconf.h b/testhal/STM32F30x/USB_CDC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F30x/USB_CDC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/USB_CDC/halconf.h b/testhal/STM32F30x/USB_CDC/halconf.h deleted file mode 100644 index 09a9a0cdb..000000000 --- a/testhal/STM32F30x/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/USB_CDC/main.c b/testhal/STM32F30x/USB_CDC/main.c deleted file mode 100644 index 31122bcbd..000000000 --- a/testhal/STM32F30x/USB_CDC/main.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * DP resistor control is not possible on the STM32F3-Discovery, using stubs - * for the connection macros. - */ -#define usb_lld_connect_bus(usbp) -#define usb_lld_disconnect_bus(usbp) - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(time); - palSetPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F30x/USB_CDC/mcuconf.h b/testhal/STM32F30x/USB_CDC/mcuconf.h deleted file mode 100644 index 57f596299..000000000 --- a/testhal/STM32F30x/USB_CDC/mcuconf.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/USB_CDC/readme.txt b/testhal/STM32F30x/USB_CDC/readme.txt deleted file mode 100644 index 39055f999..000000000 --- a/testhal/STM32F30x/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/ADC/.cproject b/testhal/STM32F37x/ADC/.cproject deleted file mode 100644 index 2230bab81..000000000 --- a/testhal/STM32F37x/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/ADC/.project b/testhal/STM32F37x/ADC/.project deleted file mode 100644 index 1ac97fa04..000000000 --- a/testhal/STM32F37x/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/ADC/Makefile b/testhal/STM32F37x/ADC/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/ADC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/ADC/chconf.h b/testhal/STM32F37x/ADC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/ADC/halconf.h b/testhal/STM32F37x/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F37x/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/ADC/main.c b/testhal/STM32F37x/ADC/main.c deleted file mode 100644 index b54733dae..000000000 --- a/testhal/STM32F37x/ADC/main.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN1, IN9. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - .u.adc = { - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* LTR */ - 0, /* HTR */ - { /* SMPR[2] */ - 0, - ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5), - }, - { /* SQR[3] */ - 0, - 0, - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) - } - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN1, IN9, IN1, IN9, IN1, IN9, VBat, Sensor. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - .u.adc = { - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* LTR */ - 0, /* HTR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), - ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5) - }, - { /* SQR[3] */ - 0, - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VBAT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN1) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN1) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) - } - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver, the temperature sensor and the VBat - * measurement. - */ - adcStart(&ADCD1, NULL); - adcSTM32Calibrate(&ADCD1); - adcSTM32EnableTSVREFE(); - adcSTM32EnableVBATE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/ADC/mcuconf.h b/testhal/STM32F37x/ADC/mcuconf.h deleted file mode 100644 index d4e69dafe..000000000 --- a/testhal/STM32F37x/ADC/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/ADC/readme.txt b/testhal/STM32F37x/ADC/readme.txt deleted file mode 100644 index 8cb97fdc2..000000000 --- a/testhal/STM32F37x/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x ADC driver on the -ADC peripheral. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/CAN/.cproject b/testhal/STM32F37x/CAN/.cproject deleted file mode 100644 index a6eeccae8..000000000 --- a/testhal/STM32F37x/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/CAN/.project b/testhal/STM32F37x/CAN/.project deleted file mode 100644 index 5afd7689e..000000000 --- a/testhal/STM32F37x/CAN/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/CAN/Makefile b/testhal/STM32F37x/CAN/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/CAN/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/CAN/chconf.h b/testhal/STM32F37x/CAN/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/CAN/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/CAN/halconf.h b/testhal/STM32F37x/CAN/halconf.h deleted file mode 100644 index a1195d7e1..000000000 --- a/testhal/STM32F37x/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/CAN/main.c b/testhal/STM32F37x/CAN/main.c deleted file mode 100644 index 7b8b7bf59..000000000 --- a/testhal/STM32F37x/CAN/main.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static THD_WORKING_AREA(can_rx_wa, 256); -static THD_FUNCTION(can_rx, p) { - event_listener_t el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminateX()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { - /* Process message.*/ - palTogglePad(GPIOC, GPIOC_LED1); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static THD_WORKING_AREA(can_tx_wa, 256); -static THD_FUNCTION(can_tx, p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminateX()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/CAN/mcuconf.h b/testhal/STM32F37x/CAN/mcuconf.h deleted file mode 100644 index 169b64c76..000000000 --- a/testhal/STM32F37x/CAN/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/CAN/readme.txt b/testhal/STM32F37x/CAN/readme.txt deleted file mode 100644 index 9acc1deee..000000000 --- a/testhal/STM32F37x/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/EXT/.cproject b/testhal/STM32F37x/EXT/.cproject deleted file mode 100644 index 420df3639..000000000 --- a/testhal/STM32F37x/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/EXT/.project b/testhal/STM32F37x/EXT/.project deleted file mode 100644 index 042fdd5c9..000000000 --- a/testhal/STM32F37x/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/EXT/Makefile b/testhal/STM32F37x/EXT/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/EXT/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/EXT/chconf.h b/testhal/STM32F37x/EXT/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/EXT/halconf.h b/testhal/STM32F37x/EXT/halconf.h deleted file mode 100644 index 5b67db37b..000000000 --- a/testhal/STM32F37x/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/EXT/main.c b/testhal/STM32F37x/EXT/main.c deleted file mode 100644 index ed42de752..000000000 --- a/testhal/STM32F37x/EXT/main.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palClearPad(GPIOC, GPIOC_LED1); - chSysLockFromISR(); - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTDoSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F37x/EXT/mcuconf.h b/testhal/STM32F37x/EXT/mcuconf.h deleted file mode 100644 index 169b64c76..000000000 --- a/testhal/STM32F37x/EXT/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/EXT/readme.txt b/testhal/STM32F37x/EXT/readme.txt deleted file mode 100644 index e5a0e21fb..000000000 --- a/testhal/STM32F37x/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/I2C/.cproject b/testhal/STM32F37x/I2C/.cproject deleted file mode 100644 index 367316a03..000000000 --- a/testhal/STM32F37x/I2C/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/I2C/.project b/testhal/STM32F37x/I2C/.project deleted file mode 100644 index e6d8e13d9..000000000 --- a/testhal/STM32F37x/I2C/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-I2C - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/I2C/Makefile b/testhal/STM32F37x/I2C/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/I2C/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/I2C/chconf.h b/testhal/STM32F37x/I2C/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/I2C/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/I2C/halconf.h b/testhal/STM32F37x/I2C/halconf.h deleted file mode 100644 index 858b84dbe..000000000 --- a/testhal/STM32F37x/I2C/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/I2C/main.c b/testhal/STM32F37x/I2C/main.c deleted file mode 100644 index cd1ac7417..000000000 --- a/testhal/STM32F37x/I2C/main.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Timing values are taken from the RM except the PRESC set to 9 because - * the input clock is 72MHz. - * The timings are critical, please always refer to the STM32 Reference - * Manual before attempting changes. - */ -#if 0 -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(8U) | /* 72MHz/9 = 8MHz I2CCLK. */ - STM32_TIMINGR_SCLDEL(3U) | STM32_TIMINGR_SDADEL(3U) | - STM32_TIMINGR_SCLH(3U) | STM32_TIMINGR_SCLL(9U), - 0, - 0 -}; -#endif -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(15U) | - STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) | - STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U), - 0, - 0 -}; - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(blinker_wa, 128); -static THD_FUNCTION(blinker, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starting the I2C driver 2. - */ - i2cStart(&I2CD2, &i2cconfig); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - unsigned i; - msg_t msg; - static const uint8_t cmd[] = {0, 0}; - uint8_t data[16]; - - msg = i2cMasterTransmitTimeout(&I2CD2, 0x52, cmd, sizeof(cmd), - data, sizeof(data), TIME_INFINITE); - if (msg != MSG_OK) - palTogglePad(GPIOC, GPIOC_LED3); - for (i = 0; i < 256; i++) { - msg = i2cMasterReceiveTimeout(&I2CD2, 0x52, - data, sizeof(data), TIME_INFINITE); - if (msg != MSG_OK) - palTogglePad(GPIOC, GPIOC_LED3); - } - chThdSleepMilliseconds(500); - palTogglePad(GPIOC, GPIOC_LED2); - } - return 0; -} diff --git a/testhal/STM32F37x/I2C/mcuconf.h b/testhal/STM32F37x/I2C/mcuconf.h deleted file mode 100644 index ae51be7b1..000000000 --- a/testhal/STM32F37x/I2C/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 TRUE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/I2C/readme.txt b/testhal/STM32F37x/I2C/readme.txt deleted file mode 100644 index f7d032869..000000000 --- a/testhal/STM32F37x/I2C/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - I2C driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x I2C driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/IRQ_STORM/.cproject b/testhal/STM32F37x/IRQ_STORM/.cproject deleted file mode 100644 index 77982a8a0..000000000 --- a/testhal/STM32F37x/IRQ_STORM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/IRQ_STORM/.project b/testhal/STM32F37x/IRQ_STORM/.project deleted file mode 100644 index 9768d6602..000000000 --- a/testhal/STM32F37x/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/IRQ_STORM/Makefile b/testhal/STM32F37x/IRQ_STORM/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/IRQ_STORM/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/IRQ_STORM/chconf.h b/testhal/STM32F37x/IRQ_STORM/chconf.h deleted file mode 100644 index 7ff9a1440..000000000 --- a/testhal/STM32F37x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/IRQ_STORM/halconf.h b/testhal/STM32F37x/IRQ_STORM/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F37x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/IRQ_STORM/main.c b/testhal/STM32F37x/IRQ_STORM/main.c deleted file mode 100644 index 5d42eb65e..000000000 --- a/testhal/STM32F37x/IRQ_STORM/main.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED1); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2 using the default configuration, pins - * are pre-configured in board.h. - */ - sdStart(&SD2, NULL); - - /* - * Activates GPTs. - */ - gptStart(&GPTD4, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F37x/IRQ_STORM/mcuconf.h b/testhal/STM32F37x/IRQ_STORM/mcuconf.h deleted file mode 100644 index a913da351..000000000 --- a/testhal/STM32F37x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM12 TRUE -#define STM32_GPT_USE_TIM14 TRUE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/IRQ_STORM/readme.txt b/testhal/STM32F37x/IRQ_STORM/readme.txt deleted file mode 100644 index 740cf3c20..000000000 --- a/testhal/STM32F37x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -- Connect a terminal emulator to serial port connector (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/PWM-ICU/.cproject b/testhal/STM32F37x/PWM-ICU/.cproject deleted file mode 100644 index 42e9f611b..000000000 --- a/testhal/STM32F37x/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/PWM-ICU/.project b/testhal/STM32F37x/PWM-ICU/.project deleted file mode 100644 index 3ee772eaa..000000000 --- a/testhal/STM32F37x/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/PWM-ICU/Makefile b/testhal/STM32F37x/PWM-ICU/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/PWM-ICU/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/PWM-ICU/chconf.h b/testhal/STM32F37x/PWM-ICU/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/PWM-ICU/halconf.h b/testhal/STM32F37x/PWM-ICU/halconf.h deleted file mode 100644 index c1a492c2d..000000000 --- a/testhal/STM32F37x/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/PWM-ICU/main.c b/testhal/STM32F37x/PWM-ICU/main.c deleted file mode 100644 index ccc877f3f..000000000 --- a/testhal/STM32F37x/PWM-ICU/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOC, GPIOC_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOC, GPIOC_LED1); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_LOW, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOC, GPIOC_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOC, GPIOC_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_LOW, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 5 and ICU driver 3. - * GPIOC0 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD5, &pwmcfg); - palSetPadMode(GPIOC, 0, PAL_MODE_ALTERNATE(2)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD5, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD5, 0); - pwmStop(&PWMD5); - icuDisable(&ICUD3); - icuStop(&ICUD3); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/PWM-ICU/mcuconf.h b/testhal/STM32F37x/PWM-ICU/mcuconf.h deleted file mode 100644 index d779ed3f8..000000000 --- a/testhal/STM32F37x/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 TRUE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/PWM-ICU/readme.txt b/testhal/STM32F37x/PWM-ICU/readme.txt deleted file mode 100644 index b1acb879a..000000000 --- a/testhal/STM32F37x/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x PWM and ICU drivers. - -** Board Setup ** - -- Connect PC0 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/SDADC/.cproject b/testhal/STM32F37x/SDADC/.cproject deleted file mode 100644 index f3f922904..000000000 --- a/testhal/STM32F37x/SDADC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/SDADC/.project b/testhal/STM32F37x/SDADC/.project deleted file mode 100644 index 72cfb92b9..000000000 --- a/testhal/STM32F37x/SDADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-SDADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/SDADC/Makefile b/testhal/STM32F37x/SDADC/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/SDADC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/SDADC/chconf.h b/testhal/STM32F37x/SDADC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/SDADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SDADC/halconf.h b/testhal/STM32F37x/SDADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F37x/SDADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SDADC/main.c b/testhal/STM32F37x/SDADC/main.c deleted file mode 100644 index 6d5bd4383..000000000 --- a/testhal/STM32F37x/SDADC/main.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 1 -#define ADC_GRP2_BUF_DEPTH 32 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * SDADC configuration. - */ -static const ADCConfig sdadc_config = { - 0, - { - SDADC_CONFR_GAIN_1X | SDADC_CONFR_SE_ZERO_VOLT | SDADC_CONFR_COMMON_VSSSD, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: ADC_IN5P. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - .u.sdadc = { - SDADC_CR2_JSWSTART, /* CR2 */ - SDADC_JCHGR_CH(5), /* JCHGR */ - { /* CONFCHR[2]*/ - SDADC_CONFCHR1_CH5(0), - 0 - } - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 32 samples of 1 channel, SW triggered. - * Channels: ADC_IN5P. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - .u.sdadc = { - SDADC_CR2_JSWSTART, /* CR2 */ - SDADC_JCHGR_CH(5), /* JCHGR */ - { /* CONFCHR[2]*/ - SDADC_CONFCHR1_CH5(0), - 0 - } - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the SDADC1 driver. - */ - adcStart(&SDADCD1, &sdadc_config); - adcSTM32Calibrate(&SDADCD1); - - /* - * Linear conversion. - */ - adcConvert(&SDADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&SDADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { - adcStopConversion(&SDADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/SDADC/mcuconf.h b/testhal/STM32F37x/SDADC/mcuconf.h deleted file mode 100644 index 9768c0deb..000000000 --- a/testhal/STM32F37x/SDADC/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_SDADC1 TRUE -#define STM32_ADC_USE_SDADC2 TRUE -#define STM32_ADC_USE_SDADC3 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/SDADC/readme.txt b/testhal/STM32F37x/SDADC/readme.txt deleted file mode 100644 index 0e5191419..000000000 --- a/testhal/STM32F37x/SDADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x ADC driver on the -SDADC peripheral. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/SPI/.cproject b/testhal/STM32F37x/SPI/.cproject deleted file mode 100644 index 5aaba7ac7..000000000 --- a/testhal/STM32F37x/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/SPI/.project b/testhal/STM32F37x/SPI/.project deleted file mode 100644 index b3ceb5b95..000000000 --- a/testhal/STM32F37x/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/SPI/Makefile b/testhal/STM32F37x/SPI/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/SPI/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/SPI/chconf.h b/testhal/STM32F37x/SPI/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SPI/halconf.h b/testhal/STM32F37x/SPI/halconf.h deleted file mode 100644 index 99f546dd1..000000000 --- a/testhal/STM32F37x/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SPI/main.c b/testhal/STM32F37x/SPI/main.c deleted file mode 100644 index 7c005122a..000000000 --- a/testhal/STM32F37x/SPI/main.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 10, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 10, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) { - - (void)p; - - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOC, GPIOC_LED2); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) { - - (void)p; - - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOC, GPIOC_LED2); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(blinker_wa, 128); -static THD_FUNCTION(blinker, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/SPI/mcuconf.h b/testhal/STM32F37x/SPI/mcuconf.h deleted file mode 100644 index 2269c0a54..000000000 --- a/testhal/STM32F37x/SPI/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/SPI/readme.txt b/testhal/STM32F37x/SPI/readme.txt deleted file mode 100644 index ebf5f3563..000000000 --- a/testhal/STM32F37x/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/UART/.cproject b/testhal/STM32F37x/UART/.cproject deleted file mode 100644 index be46a014d..000000000 --- a/testhal/STM32F37x/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/UART/.project b/testhal/STM32F37x/UART/.project deleted file mode 100644 index b1fb421f4..000000000 --- a/testhal/STM32F37x/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/UART/Makefile b/testhal/STM32F37x/UART/Makefile deleted file mode 100644 index d8a5decbb..000000000 --- a/testhal/STM32F37x/UART/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/UART/chconf.h b/testhal/STM32F37x/UART/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/UART/halconf.h b/testhal/STM32F37x/UART/halconf.h deleted file mode 100644 index e9b103442..000000000 --- a/testhal/STM32F37x/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/UART/main.c b/testhal/STM32F37x/UART/main.c deleted file mode 100644 index ddba3eed7..000000000 --- a/testhal/STM32F37x/UART/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED1); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palClearPad(GPIOC, GPIOC_LED1); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART2. - */ - uartStart(&UARTD2, &uart_cfg_1); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD2, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/UART/mcuconf.h b/testhal/STM32F37x/UART/mcuconf.h deleted file mode 100644 index 869b709e6..000000000 --- a/testhal/STM32F37x/UART/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/UART/readme.txt b/testhal/STM32F37x/UART/readme.txt deleted file mode 100644 index 27b6bfefd..000000000 --- a/testhal/STM32F37x/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/USB_CDC/.cproject b/testhal/STM32F37x/USB_CDC/.cproject deleted file mode 100644 index 66a97f931..000000000 --- a/testhal/STM32F37x/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/USB_CDC/.project b/testhal/STM32F37x/USB_CDC/.project deleted file mode 100644 index fb16abfeb..000000000 --- a/testhal/STM32F37x/USB_CDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F37x-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F37x/USB_CDC/Makefile b/testhal/STM32F37x/USB_CDC/Makefile deleted file mode 100644 index ee16155a1..000000000 --- a/testhal/STM32F37x/USB_CDC/Makefile +++ /dev/null @@ -1,205 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f37x.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/shell.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F37x/USB_CDC/chconf.h b/testhal/STM32F37x/USB_CDC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F37x/USB_CDC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/USB_CDC/halconf.h b/testhal/STM32F37x/USB_CDC/halconf.h deleted file mode 100644 index 09a9a0cdb..000000000 --- a/testhal/STM32F37x/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/USB_CDC/main.c b/testhal/STM32F37x/USB_CDC/main.c deleted file mode 100644 index 8730cabe6..000000000 --- a/testhal/STM32F37x/USB_CDC/main.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * DP resistor control. - */ -#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISCONNECT) -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISCONNECT) - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(time); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F37x/USB_CDC/mcuconf.h b/testhal/STM32F37x/USB_CDC/mcuconf.h deleted file mode 100644 index 4ebd6c8a9..000000000 --- a/testhal/STM32F37x/USB_CDC/mcuconf.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/USB_CDC/readme.txt b/testhal/STM32F37x/USB_CDC/readme.txt deleted file mode 100644 index 1c0755213..000000000 --- a/testhal/STM32F37x/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/ADC/.cproject b/testhal/STM32F4xx/ADC/.cproject deleted file mode 100644 index fe8f3f8c5..000000000 --- a/testhal/STM32F4xx/ADC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/ADC/.project b/testhal/STM32F4xx/ADC/.project deleted file mode 100644 index 8ce12644e..000000000 --- a/testhal/STM32F4xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/ADC/Makefile b/testhal/STM32F4xx/ADC/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/ADC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/ADC/chconf.h b/testhal/STM32F4xx/ADC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/ADC/halconf.h b/testhal/STM32F4xx/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32F4xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/ADC/main.c b/testhal/STM32F4xx/ADC/main.c deleted file mode 100644 index 7fff13612..000000000 --- a/testhal/STM32F4xx/ADC/main.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN11. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN11(ADC_SAMPLE_3), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, /* SQR2 */ - ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED5); - chThdSleepMilliseconds(500); - palClearPad(GPIOD, GPIOD_LED5); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F4xx/ADC/mcuconf.h b/testhal/STM32F4xx/ADC/mcuconf.h deleted file mode 100644 index 52b78c9f5..000000000 --- a/testhal/STM32F4xx/ADC/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/ADC/readme.txt b/testhal/STM32F4xx/ADC/readme.txt deleted file mode 100644 index af029649b..000000000 --- a/testhal/STM32F4xx/ADC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/CAN/.cproject b/testhal/STM32F4xx/CAN/.cproject deleted file mode 100644 index fb00be23a..000000000 --- a/testhal/STM32F4xx/CAN/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/CAN/.project b/testhal/STM32F4xx/CAN/.project deleted file mode 100644 index 91f465f67..000000000 --- a/testhal/STM32F4xx/CAN/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F4xx-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/CAN/Makefile b/testhal/STM32F4xx/CAN/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/CAN/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/CAN/chconf.h b/testhal/STM32F4xx/CAN/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/CAN/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/CAN/halconf.h b/testhal/STM32F4xx/CAN/halconf.h deleted file mode 100644 index a1195d7e1..000000000 --- a/testhal/STM32F4xx/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/CAN/main.c b/testhal/STM32F4xx/CAN/main.c deleted file mode 100644 index f06bad79f..000000000 --- a/testhal/STM32F4xx/CAN/main.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -struct can_instance { - CANDriver *canp; - uint32_t led; -}; - -static const struct can_instance can1 = {&CAND1, GPIOD_LED5}; -static const struct can_instance can2 = {&CAND2, GPIOD_LED3}; - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - * See section 22.7.7 on the STM32 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static THD_WORKING_AREA(can_rx1_wa, 256); -static THD_WORKING_AREA(can_rx2_wa, 256); -static msg_t can_rx(void *p) { - struct can_instance *cip = p; - event_listener_t el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&cip->canp->rxfull_event, &el, 0); - while(!chThdShouldTerminateX()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(cip->canp, CAN_ANY_MAILBOX, - &rxmsg, TIME_IMMEDIATE) == MSG_OK) { - /* Process message.*/ - palTogglePad(GPIOD, cip->led); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static THD_WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminateX()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - canTransmit(&CAND2, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN drivers 1 and 2. - */ - canStart(&CAND1, &cancfg); - canStart(&CAND2, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx1_wa, sizeof(can_rx1_wa), NORMALPRIO + 7, - can_rx, (void *)&can1); - chThdCreateStatic(can_rx2_wa, sizeof(can_rx2_wa), NORMALPRIO + 7, - can_rx, (void *)&can2); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, - can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/CAN/mcuconf.h b/testhal/STM32F4xx/CAN/mcuconf.h deleted file mode 100644 index 4a7490bef..000000000 --- a/testhal/STM32F4xx/CAN/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_USE_CAN2 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/CAN/readme.txt b/testhal/STM32F4xx/CAN/readme.txt deleted file mode 100644 index 5884567ac..000000000 --- a/testhal/STM32F4xx/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32 CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/DAC/.cproject b/testhal/STM32F4xx/DAC/.cproject deleted file mode 100644 index e05dca097..000000000 --- a/testhal/STM32F4xx/DAC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/DAC/.project b/testhal/STM32F4xx/DAC/.project deleted file mode 100644 index 02d405ad8..000000000 --- a/testhal/STM32F4xx/DAC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-DAC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/DAC/Makefile b/testhal/STM32F4xx/DAC/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/DAC/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/DAC/chconf.h b/testhal/STM32F4xx/DAC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/DAC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DAC/halconf.h b/testhal/STM32F4xx/DAC/halconf.h deleted file mode 100644 index dc8857ac7..000000000 --- a/testhal/STM32F4xx/DAC/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DAC/main.c b/testhal/STM32F4xx/DAC/main.c deleted file mode 100644 index 10da042ed..000000000 --- a/testhal/STM32F4xx/DAC/main.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Normal main() thread activity, if the button is pressed then the I2s - * transfer is stopped. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/DAC/mcuconf.h b/testhal/STM32F4xx/DAC/mcuconf.h deleted file mode 100644 index c9c5681ac..000000000 --- a/testhal/STM32F4xx/DAC/mcuconf.h +++ /dev/null @@ -1,332 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_PLLI2S -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_USE_CHN1 TRUE -#define STM32_DAC_USE_CHN2 FALSE -#define STM32_DAC_CHN1_IRQ_PRIORITY 10 -#define STM32_DAC_CHN2_IRQ_PRIORITY 10 -#define STM32_DAC_CHN1_DMA_PRIORITY 2 -#define STM32_DAC_CHN2_DMA_PRIORITY 2 -#define STM32_DAC_DMA_ERROR_HOOK(dacp) osalSysHalt() -#define STM32_DAC_CHN1_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_DAC_CHN2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/DAC/readme.txt b/testhal/STM32F4xx/DAC/readme.txt deleted file mode 100644 index f1273c649..000000000 --- a/testhal/STM32F4xx/DAC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - DAC driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx DAC driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/DMA_STORM/.cproject b/testhal/STM32F4xx/DMA_STORM/.cproject deleted file mode 100644 index 4b78ef53c..000000000 --- a/testhal/STM32F4xx/DMA_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/DMA_STORM/.project b/testhal/STM32F4xx/DMA_STORM/.project deleted file mode 100644 index 9841eee9f..000000000 --- a/testhal/STM32F4xx/DMA_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-DMA_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/DMA_STORM/Makefile b/testhal/STM32F4xx/DMA_STORM/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/DMA_STORM/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/DMA_STORM/chconf.h b/testhal/STM32F4xx/DMA_STORM/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/DMA_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DMA_STORM/halconf.h b/testhal/STM32F4xx/DMA_STORM/halconf.h deleted file mode 100644 index 09ca1aaad..000000000 --- a/testhal/STM32F4xx/DMA_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DMA_STORM/main.c b/testhal/STM32F4xx/DMA_STORM/main.c deleted file mode 100644 index e334e6a67..000000000 --- a/testhal/STM32F4xx/DMA_STORM/main.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - (void)buffer; - (void)n; -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; - chSysHalt("ADC error"); -} - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -static void tmo(void *p) { - - (void)p; - chSysHalt("timeout"); -} - -/* - * SPI thread. - */ -static THD_WORKING_AREA(waSPI1, 1024); -static THD_WORKING_AREA(waSPI2, 1024); -static THD_WORKING_AREA(waSPI3, 1024); -static msg_t spi_thread(void *p) { - unsigned i; - SPIDriver *spip = (SPIDriver *)p; - virtual_timer_t vt; - uint8_t txbuf[256]; - uint8_t rxbuf[256]; - - chVTObjectInit(&vt); - - /* Prepare transmit pattern.*/ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Continuous transmission.*/ - while (TRUE) { - /* Starts a VT working as watchdog to catch a malfunction in the SPI - driver.*/ - chVTSet(&vt, MS2ST(10), tmo, NULL); - - spiExchange(spip, sizeof(txbuf), txbuf, rxbuf); - - /* Stops the watchdog.*/ - chVTReset(&vt); - } -} - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED3); /* Orange. */ - chThdSleepMilliseconds(500); - palClearPad(GPIOD, GPIOD_LED3); /* Orange. */ - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - static uint8_t patterns1[4096], patterns2[4096], buf1[4096], buf2[4096]; - - /* System initializations. - - HAL initialization, this also initializes the configured device drivers - and performs the board-specific initializations. - - Kernel initialization, the main() function becomes a thread and the - RTOS is active.*/ - halInit(); - chSysInit(); - - /* Creates the blinker thread.*/ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 10, - Thread1, NULL); - - /* Activates the ADC1 driver and the temperature sensor.*/ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* Starts an ADC continuous conversion.*/ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* Activating SPI drivers.*/ - spiStart(&SPID1, &hs_spicfg); - spiStart(&SPID2, &hs_spicfg); - spiStart(&SPID3, &hs_spicfg); - - /* Starting SPI threads instances.*/ - chThdCreateStatic(waSPI1, sizeof(waSPI1), NORMALPRIO + 1, spi_thread, &SPID1); - chThdCreateStatic(waSPI2, sizeof(waSPI2), NORMALPRIO + 1, spi_thread, &SPID2); - chThdCreateStatic(waSPI3, sizeof(waSPI3), NORMALPRIO + 1, spi_thread, &SPID3); - - /* Allocating two DMA2 streams for memory copy operations.*/ - if (dmaStreamAllocate(STM32_DMA2_STREAM6, 0, NULL, NULL)) - chSysHalt("DMA already in use"); - if (dmaStreamAllocate(STM32_DMA2_STREAM7, 0, NULL, NULL)) - chSysHalt("DMA already in use"); - for (i = 0; i < sizeof (patterns1); i++) - patterns1[i] = (uint8_t)i; - for (i = 0; i < sizeof (patterns2); i++) - patterns2[i] = (uint8_t)(i ^ 0xAA); - - /* Normal main() thread activity, it does continues memory copy operations - using 2 DMA streams at the lowest priority.*/ - while (TRUE) { - virtual_timer_t vt; - - chVTObjectInit(&vt); - - /* Starts a VT working as watchdog to catch a malfunction in the DMA - driver.*/ - chVTSet(&vt, MS2ST(10), tmo, NULL); - - /* Copy pattern 1.*/ - dmaStartMemCopy(STM32_DMA2_STREAM6, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns1, buf1, sizeof (patterns1)); - dmaStartMemCopy(STM32_DMA2_STREAM7, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns1, buf2, sizeof (patterns1)); - dmaWaitCompletion(STM32_DMA2_STREAM6); - dmaWaitCompletion(STM32_DMA2_STREAM7); - if (memcmp(patterns1, buf1, sizeof (patterns1))) - chSysHalt("pattern error"); - if (memcmp(patterns1, buf2, sizeof (patterns1))) - chSysHalt("pattern error"); - - /* Copy pattern 2.*/ - dmaStartMemCopy(STM32_DMA2_STREAM6, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns2, buf1, sizeof (patterns2)); - dmaStartMemCopy(STM32_DMA2_STREAM7, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns2, buf2, sizeof (patterns2)); - dmaWaitCompletion(STM32_DMA2_STREAM6); - dmaWaitCompletion(STM32_DMA2_STREAM7); - if (memcmp(patterns2, buf1, sizeof (patterns2))) - chSysHalt("pattern error"); - if (memcmp(patterns2, buf2, sizeof (patterns2))) - chSysHalt("pattern error"); - - /* Stops the watchdog.*/ - chVTReset(&vt); - - chThdSleepMilliseconds(2); - } - return 0; -} diff --git a/testhal/STM32F4xx/DMA_STORM/mcuconf.h b/testhal/STM32F4xx/DMA_STORM/mcuconf.h deleted file mode 100644 index a7eb46af3..000000000 --- a/testhal/STM32F4xx/DMA_STORM/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_USE_CAN2 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/EXT/.cproject b/testhal/STM32F4xx/EXT/.cproject deleted file mode 100644 index b7cb49ea0..000000000 --- a/testhal/STM32F4xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/EXT/.project b/testhal/STM32F4xx/EXT/.project deleted file mode 100644 index 5e621fa15..000000000 --- a/testhal/STM32F4xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/EXT/Makefile b/testhal/STM32F4xx/EXT/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/EXT/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/EXT/chconf.h b/testhal/STM32F4xx/EXT/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/EXT/halconf.h b/testhal/STM32F4xx/EXT/halconf.h deleted file mode 100644 index 5b67db37b..000000000 --- a/testhal/STM32F4xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/EXT/main.c b/testhal/STM32F4xx/EXT/main.c deleted file mode 100644 index 2963f52a1..000000000 --- a/testhal/STM32F4xx/EXT/main.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromISR(); - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F4xx/EXT/mcuconf.h b/testhal/STM32F4xx/EXT/mcuconf.h deleted file mode 100644 index 81031a79a..000000000 --- a/testhal/STM32F4xx/EXT/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/EXT/readme.txt b/testhal/STM32F4xx/EXT/readme.txt deleted file mode 100644 index 1105f431e..000000000 --- a/testhal/STM32F4xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/GPT/.cproject b/testhal/STM32F4xx/GPT/.cproject deleted file mode 100644 index 11c951acb..000000000 --- a/testhal/STM32F4xx/GPT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/GPT/.project b/testhal/STM32F4xx/GPT/.project deleted file mode 100644 index 89464dd13..000000000 --- a/testhal/STM32F4xx/GPT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-GPT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/GPT/Makefile b/testhal/STM32F4xx/GPT/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/GPT/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/GPT/chconf.h b/testhal/STM32F4xx/GPT/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/GPT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/GPT/halconf.h b/testhal/STM32F4xx/GPT/halconf.h deleted file mode 100644 index fa562add8..000000000 --- a/testhal/STM32F4xx/GPT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/GPT/main.c b/testhal/STM32F4xx/GPT/main.c deleted file mode 100644 index 88fb58e7d..000000000 --- a/testhal/STM32F4xx/GPT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - - (void)gptp; - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromISR(); - gptStartOneShotI(&GPTD3, 1000); /* 0.1 second pulse.*/ - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - - (void)gptp; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 10000, /* 10kHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 10000, /* 10kHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the GPT drivers 2 and 3. - */ - gptStart(&GPTD4, &gpt4cfg); - gptPolledDelay(&GPTD4, 10); /* Small delay.*/ - gptStart(&GPTD3, &gpt3cfg); - gptPolledDelay(&GPTD3, 10); /* Small delay.*/ - - /* - * Normal main() thread activity, it changes the GPT1 period every - * five seconds. - */ - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED4); - gptStartContinuous(&GPTD4, 5000); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD4); - palClearPad(GPIOD, GPIOD_LED4); - gptStartContinuous(&GPTD4, 2500); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD4); - } -} diff --git a/testhal/STM32F4xx/GPT/mcuconf.h b/testhal/STM32F4xx/GPT/mcuconf.h deleted file mode 100644 index d238f12d1..000000000 --- a/testhal/STM32F4xx/GPT/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 TRUE -#define STM32_GPT_USE_TIM6 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM9 TRUE -#define STM32_GPT_USE_TIM11 TRUE -#define STM32_GPT_USE_TIM12 TRUE -#define STM32_GPT_USE_TIM14 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/GPT/readme.txt b/testhal/STM32F4xx/GPT/readme.txt deleted file mode 100644 index 1508a8233..000000000 --- a/testhal/STM32F4xx/GPT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - GPT driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/I2C/.cproject b/testhal/STM32F4xx/I2C/.cproject deleted file mode 100644 index 8ceae86ea..000000000 --- a/testhal/STM32F4xx/I2C/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/I2C/.project b/testhal/STM32F4xx/I2C/.project deleted file mode 100644 index a3b5ed440..000000000 --- a/testhal/STM32F4xx/I2C/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-I2C - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1 - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/I2C/Makefile b/testhal/STM32F4xx/I2C/Makefile deleted file mode 100644 index 609ed9012..000000000 --- a/testhal/STM32F4xx/I2C/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/I2C/chconf.h b/testhal/STM32F4xx/I2C/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/I2C/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2C/halconf.h b/testhal/STM32F4xx/I2C/halconf.h deleted file mode 100644 index ae69b9284..000000000 --- a/testhal/STM32F4xx/I2C/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2C/main.c b/testhal/STM32F4xx/I2C/main.c deleted file mode 100644 index b90feb138..000000000 --- a/testhal/STM32F4xx/I2C/main.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -/** - * This demo acquire data from accelerometer and prints it in shell. - */ - -#include - -#include "ch.h" -#include "hal.h" - -/* buffers depth */ -#define ACCEL_RX_DEPTH 6 -#define ACCEL_TX_DEPTH 4 - -/* mma8451q specific addresses */ -#define ACCEL_OUT_DATA 0x01 -#define ACCEL_CTRL_REG1 0x2A - -static uint8_t rxbuf[ACCEL_RX_DEPTH]; -static uint8_t txbuf[ACCEL_TX_DEPTH]; -static i2cflags_t errors = 0; -static int16_t acceleration_x, acceleration_y, acceleration_z; -#define mma8451_addr 0b0011100 - -/** - * - */ -static void print(char *p) { - - while (*p) { - sdPut(&SD2, *p++); - } -} - -/** - * - */ -static void println(char *p) { - - while (*p) { - sdPut(&SD2, *p++); - } - sdWriteTimeout(&SD2, (uint8_t *)"\r\n", 2, TIME_INFINITE); -} - -/** - * - */ -static void printn(int16_t n) { - char buf[16], *p; - - if (n > 0) - sdPut(&SD2, '+'); - else{ - sdPut(&SD2, '-'); - n = abs(n); - } - - if (!n) - sdPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - sdPut(&SD2, *--p); - } -} - -/** - * Converts data from 2complemented representation to signed integer - */ -int16_t complement2signed(uint8_t msb, uint8_t lsb){ - uint16_t word = 0; - word = (msb << 8) + lsb; - if (msb > 0x7F){ - return -1 * ((int16_t)((~word) + 1)); - } - return (int16_t)word; -} - -/* I2C interface #2 */ -static const I2CConfig i2cfg2 = { - OPMODE_I2C, - 400000, - FAST_DUTY_CYCLE_2, -}; - -/* - * Application entry point. - */ -int main(void) { - msg_t status = MSG_OK; - systime_t tmo = MS2ST(4); - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starts I2C - */ - i2cStart(&I2CD2, &i2cfg2); - - /* - * Prepares the Serial driver 2 - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - - /** - * Prepares the accelerometer - */ - txbuf[0] = ACCEL_CTRL_REG1; /* register address */ - txbuf[1] = 0x1; - i2cAcquireBus(&I2CD2); - status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 2, rxbuf, 0, tmo); - i2cReleaseBus(&I2CD2); - - if (status != MSG_OK){ - errors = i2cGetErrors(&I2CD2); - } - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - palTogglePad(GPIOB, GPIOB_LED_B); - chThdSleepMilliseconds(100); - - txbuf[0] = ACCEL_OUT_DATA; /* register address */ - i2cAcquireBus(&I2CD2); - status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 1, rxbuf, 6, tmo); - i2cReleaseBus(&I2CD2); - - if (status != MSG_OK){ - errors = i2cGetErrors(&I2CD2); - } - - acceleration_x = complement2signed(rxbuf[0], rxbuf[1]); - acceleration_y = complement2signed(rxbuf[2], rxbuf[3]); - acceleration_z = complement2signed(rxbuf[4], rxbuf[5]); - - print("x: "); - printn(acceleration_x); - print(" y: "); - printn(acceleration_y); - print(" z: "); - printn(acceleration_z); - println(""); - } -} - - - diff --git a/testhal/STM32F4xx/I2C/mcuconf.h b/testhal/STM32F4xx/I2C/mcuconf.h deleted file mode 100644 index b7813c529..000000000 --- a/testhal/STM32F4xx/I2C/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 TRUE -#define STM32_I2C_USE_I2C3 TRUE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/I2S/.cproject b/testhal/STM32F4xx/I2S/.cproject deleted file mode 100644 index e05dca097..000000000 --- a/testhal/STM32F4xx/I2S/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/I2S/.project b/testhal/STM32F4xx/I2S/.project deleted file mode 100644 index a3373c0bf..000000000 --- a/testhal/STM32F4xx/I2S/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-I2S - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/I2S/Makefile b/testhal/STM32F4xx/I2S/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/I2S/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/I2S/chconf.h b/testhal/STM32F4xx/I2S/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/I2S/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2S/halconf.h b/testhal/STM32F4xx/I2S/halconf.h deleted file mode 100644 index fb3e8905a..000000000 --- a/testhal/STM32F4xx/I2S/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S TRUE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2S/main.c b/testhal/STM32F4xx/I2S/main.c deleted file mode 100644 index b96f22fb4..000000000 --- a/testhal/STM32F4xx/I2S/main.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define I2S_BUF_SIZE 256 - -static uint16_t i2s_rx_buf[I2S_BUF_SIZE]; - -static void i2scallback(I2SDriver *i2sp, size_t offset, size_t n); - -static const I2SConfig i2scfg = { - NULL, - i2s_rx_buf, - I2S_BUF_SIZE, - i2scallback, - 0, - 16 -}; - -static void i2scallback(I2SDriver *i2sp, size_t offset, size_t n) { - - (void)i2sp; - (void)offset; - (void)n; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starting and configuring the I2S driver 2. - */ - i2sStart(&I2SD2, &i2scfg); - palSetPadMode(GPIOB, 10, PAL_MODE_ALTERNATE(5)); - palSetPadMode(GPIOC, 3, PAL_MODE_ALTERNATE(5)); - - /* - * Starting continuous I2S transfer. - */ - i2sStartExchange(&I2SD2); - - /* - * Normal main() thread activity, if the button is pressed then the I2s - * transfer is stopped. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) - i2sStopExchange(&I2SD2); - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/I2S/mcuconf.h b/testhal/STM32F4xx/I2S/mcuconf.h deleted file mode 100644 index 8b49e5ebd..000000000 --- a/testhal/STM32F4xx/I2S/mcuconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_PLLI2S -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 TRUE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/I2S/readme.txt b/testhal/STM32F4xx/I2S/readme.txt deleted file mode 100644 index 515e02dd9..000000000 --- a/testhal/STM32F4xx/I2S/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - I2S driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx I2S driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/IRQ_STORM/.cproject b/testhal/STM32F4xx/IRQ_STORM/.cproject deleted file mode 100644 index bf4708179..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/.project b/testhal/STM32F4xx/IRQ_STORM/.project deleted file mode 100644 index 122d48d9d..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/Makefile b/testhal/STM32F4xx/IRQ_STORM/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/IRQ_STORM/chconf.h b/testhal/STM32F4xx/IRQ_STORM/chconf.h deleted file mode 100644 index 7ff9a1440..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM/halconf.h b/testhal/STM32F4xx/IRQ_STORM/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp b/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp deleted file mode 100644 index ffd2532c1..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp +++ /dev/null @@ -1,2289 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - General - 3 - - 21 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 21 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - board - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c - - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h - - - - os - - hal - - include - - $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\can.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\can.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c - - - - - kernel - - include - - $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c - - - - - platform - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h - - - - port - - STM32F4xx - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s - - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - test - - $PROJ_DIR$\..\..\..\..\test\test.c - - - $PROJ_DIR$\..\..\..\..\test\test.h - - - $PROJ_DIR$\..\..\..\..\test\testbmk.c - - - $PROJ_DIR$\..\..\..\..\test\testbmk.h - - - $PROJ_DIR$\..\..\..\..\test\testdyn.c - - - $PROJ_DIR$\..\..\..\..\test\testdyn.h - - - $PROJ_DIR$\..\..\..\..\test\testevt.c - - - $PROJ_DIR$\..\..\..\..\test\testevt.h - - - $PROJ_DIR$\..\..\..\..\test\testheap.c - - - $PROJ_DIR$\..\..\..\..\test\testheap.h - - - $PROJ_DIR$\..\..\..\..\test\testmbox.c - - - $PROJ_DIR$\..\..\..\..\test\testmbox.h - - - $PROJ_DIR$\..\..\..\..\test\testmsg.c - - - $PROJ_DIR$\..\..\..\..\test\testmsg.h - - - $PROJ_DIR$\..\..\..\..\test\testmtx.c - - - $PROJ_DIR$\..\..\..\..\test\testmtx.h - - - $PROJ_DIR$\..\..\..\..\test\testpools.c - - - $PROJ_DIR$\..\..\..\..\test\testpools.h - - - $PROJ_DIR$\..\..\..\..\test\testqueues.c - - - $PROJ_DIR$\..\..\..\..\test\testqueues.h - - - $PROJ_DIR$\..\..\..\..\test\testsem.c - - - $PROJ_DIR$\..\..\..\..\test\testsem.h - - - $PROJ_DIR$\..\..\..\..\test\testthd.c - - - $PROJ_DIR$\..\..\..\..\test\testthd.h - - - - $PROJ_DIR$\..\chconf.h - - - $PROJ_DIR$\..\halconf.h - - - $PROJ_DIR$\..\main.c - - - $PROJ_DIR$\..\mcuconf.h - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww b/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww deleted file mode 100644 index f9b3b2000..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\ch.ewp - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf b/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf deleted file mode 100644 index c0a51f44c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf +++ /dev/null @@ -1,39 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x400; -/**** End of ICF editor section. ###ICF###*/ - -/* Size of the IRQ Stack (Main Stack).*/ -define symbol __ICFEDIT_size_irqstack__ = 0x400; - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; -define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; -define block SYSHEAP with alignment = 8 {section SYSHEAP}; -define block DATABSS with alignment = 8 {readwrite, zeroinit}; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section .intvec }; - -place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; -place in ROM_region {readonly}; -place at start of RAM_region {block IRQSTACK}; -place in RAM_region {block DATABSS, block HEAP}; -place in RAM_region {block SYSHEAP}; -place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj b/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj deleted file mode 100644 index b5e042b8a..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj +++ /dev/null @@ -1,945 +0,0 @@ - - - - 1.1 - -
### uVision Project, (C) Keil Software
- - - - Demo - 0x4 - ARM-ADS - - - STM32F407VG - STMicroelectronics - IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 - - "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") - UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) - 6103 - stm32f4xx.h - - - - - - - - - - SFD\ST\STM32F4xx\STM32F4xx.sfr - 0 - - - - ST\STM32F4xx\ - ST\STM32F4xx\ - - 0 - 0 - 0 - 0 - 1 - - .\obj\ - ch - 1 - 0 - 0 - 1 - 1 - .\lst\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - - - SARMCM3.DLL - -MPU - DCM.DLL - -pCM4 - SARMCM3.DLL - -MPU - TCM.DLL - -pCM4 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - - - 1 - 1 - 0 - 1 - 1 - 1 - 0 - 1 - - 0 - 8 - - - - - - - - - - - - - - STLink\ST-LINKIII-KEIL.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4100 - - STLink\ST-LINKIII-KEIL.dll - "" () - - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M4" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 2 - 1 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 1 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 1 - 0x8000000 - 0x100000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x100000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 0 - 0x20020000 - 0x1 - - - - - - 1 - 4 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base - - ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - - --cpreproc - - - ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - - - - - - - - board - - - board.c - 1 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c - - - board.h - 5 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h - - - - - port - - - cstartup.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s - - - chcoreasm_v7m.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s - - - chcore.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c - - - chcore_v7m.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c - - - chcore.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h - - - chcore_v7m.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h - - - chtypes.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h - - - cmparams.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h - - - vectors.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s - - - nvic.c - 1 - ..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - nvic.h - 5 - ..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - kernel - - - chcond.c - 1 - ..\..\..\..\os\kernel\src\chcond.c - - - chdebug.c - 1 - ..\..\..\..\os\kernel\src\chdebug.c - - - chdynamic.c - 1 - ..\..\..\..\os\kernel\src\chdynamic.c - - - chevents.c - 1 - ..\..\..\..\os\kernel\src\chevents.c - - - chheap.c - 1 - ..\..\..\..\os\kernel\src\chheap.c - - - chlists.c - 1 - ..\..\..\..\os\kernel\src\chlists.c - - - chmboxes.c - 1 - ..\..\..\..\os\kernel\src\chmboxes.c - - - chmemcore.c - 1 - ..\..\..\..\os\kernel\src\chmemcore.c - - - chmempools.c - 1 - ..\..\..\..\os\kernel\src\chmempools.c - - - chmsg.c - 1 - ..\..\..\..\os\kernel\src\chmsg.c - - - chmtx.c - 1 - ..\..\..\..\os\kernel\src\chmtx.c - - - chqueues.c - 1 - ..\..\..\..\os\kernel\src\chqueues.c - - - chregistry.c - 1 - ..\..\..\..\os\kernel\src\chregistry.c - - - chschd.c - 1 - ..\..\..\..\os\kernel\src\chschd.c - - - chsem.c - 1 - ..\..\..\..\os\kernel\src\chsem.c - - - chsys.c - 1 - ..\..\..\..\os\kernel\src\chsys.c - - - chthreads.c - 1 - ..\..\..\..\os\kernel\src\chthreads.c - - - chvt.c - 1 - ..\..\..\..\os\kernel\src\chvt.c - - - ch.h - 5 - ..\..\..\..\os\kernel\include\ch.h - - - chbsem.h - 5 - ..\..\..\..\os\kernel\include\chbsem.h - - - chcond.h - 5 - ..\..\..\..\os\kernel\include\chcond.h - - - chdebug.h - 5 - ..\..\..\..\os\kernel\include\chdebug.h - - - chdynamic.h - 5 - ..\..\..\..\os\kernel\include\chdynamic.h - - - chevents.h - 5 - ..\..\..\..\os\kernel\include\chevents.h - - - chfiles.h - 5 - ..\..\..\..\os\kernel\include\chfiles.h - - - chheap.h - 5 - ..\..\..\..\os\kernel\include\chheap.h - - - chinline.h - 5 - ..\..\..\..\os\kernel\include\chinline.h - - - chioch.h - 5 - ..\..\..\..\os\kernel\include\chioch.h - - - chlists.h - 5 - ..\..\..\..\os\kernel\include\chlists.h - - - chmboxes.h - 5 - ..\..\..\..\os\kernel\include\chmboxes.h - - - chmemcore.h - 5 - ..\..\..\..\os\kernel\include\chmemcore.h - - - chmempools.h - 5 - ..\..\..\..\os\kernel\include\chmempools.h - - - chmsg.h - 5 - ..\..\..\..\os\kernel\include\chmsg.h - - - chmtx.h - 5 - ..\..\..\..\os\kernel\include\chmtx.h - - - chqueues.h - 5 - ..\..\..\..\os\kernel\include\chqueues.h - - - chregistry.h - 5 - ..\..\..\..\os\kernel\include\chregistry.h - - - chschd.h - 5 - ..\..\..\..\os\kernel\include\chschd.h - - - chsem.h - 5 - ..\..\..\..\os\kernel\include\chsem.h - - - chstreams.h - 5 - ..\..\..\..\os\kernel\include\chstreams.h - - - chsys.h - 5 - ..\..\..\..\os\kernel\include\chsys.h - - - chthreads.h - 5 - ..\..\..\..\os\kernel\include\chthreads.h - - - chvt.h - 5 - ..\..\..\..\os\kernel\include\chvt.h - - - - - hal - - - hal.c - 1 - ..\..\..\..\os\hal\src\hal.c - - - pal.c - 1 - ..\..\..\..\os\hal\src\pal.c - - - serial.c - 1 - ..\..\..\..\os\hal\src\serial.c - - - hal.h - 5 - ..\..\..\..\os\hal\include\hal.h - - - pal.h - 5 - ..\..\..\..\os\hal\include\pal.h - - - serial.h - 5 - ..\..\..\..\os\hal\include\serial.h - - - gpt.h - 5 - ..\..\..\..\os\hal\include\gpt.h - - - gpt.c - 1 - ..\..\..\..\os\hal\src\gpt.c - - - tm.c - 1 - ..\..\..\..\os\hal\src\tm.c - - - - - platform - - - gpt_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - gpt_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - hal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c - - - hal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h - - - pal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - pal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - serial_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - serial_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - stm32_dma.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c - - - stm32_dma.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h - - - stm32_rcc.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h - - - stm32l1xx.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h - - - - - test - - - test.c - 1 - ..\..\..\..\test\test.c - - - testbmk.c - 1 - ..\..\..\..\test\testbmk.c - - - testdyn.c - 1 - ..\..\..\..\test\testdyn.c - - - testevt.c - 1 - ..\..\..\..\test\testevt.c - - - testheap.c - 1 - ..\..\..\..\test\testheap.c - - - testmbox.c - 1 - ..\..\..\..\test\testmbox.c - - - testmsg.c - 1 - ..\..\..\..\test\testmsg.c - - - testmtx.c - 1 - ..\..\..\..\test\testmtx.c - - - testpools.c - 1 - ..\..\..\..\test\testpools.c - - - testqueues.c - 1 - ..\..\..\..\test\testqueues.c - - - testsem.c - 1 - ..\..\..\..\test\testsem.c - - - testthd.c - 1 - ..\..\..\..\test\testthd.c - - - test.h - 5 - ..\..\..\..\test\test.h - - - testbmk.h - 5 - ..\..\..\..\test\testbmk.h - - - testdyn.h - 5 - ..\..\..\..\test\testdyn.h - - - testevt.h - 5 - ..\..\..\..\test\testevt.h - - - testheap.h - 5 - ..\..\..\..\test\testheap.h - - - testmbox.h - 5 - ..\..\..\..\test\testmbox.h - - - testmsg.h - 5 - ..\..\..\..\test\testmsg.h - - - testmtx.h - 5 - ..\..\..\..\test\testmtx.h - - - testpools.h - 5 - ..\..\..\..\test\testpools.h - - - testqueues.h - 5 - ..\..\..\..\test\testqueues.h - - - testsem.h - 5 - ..\..\..\..\test\testsem.h - - - testthd.h - 5 - ..\..\..\..\test\testthd.h - - - - - demo - - - main.c - 1 - ..\main.c - - - mcuconf.h - 5 - ..\mcuconf.h - - - chconf.h - 5 - ..\chconf.h - - - halconf.h - 5 - ..\halconf.h - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/main.c b/testhal/STM32F4xx/IRQ_STORM/main.c deleted file mode 100644 index 861a6e033..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/main.c +++ /dev/null @@ -1,333 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOD, GPIOD_LED5); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 2 and 3. - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - gptStart(&GPTD4, &gpt4cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; - interval >= 2; - interval -= (interval + 9) / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 9fca1da26..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/IRQ_STORM/readme.txt b/testhal/STM32F4xx/IRQ_STORM/readme.txt deleted file mode 100644 index 2b9f076f5..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject b/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject deleted file mode 100644 index 304afdf99..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/.project b/testhal/STM32F4xx/IRQ_STORM_FPU/.project deleted file mode 100644 index d2e79b473..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-IRQ_STORM_FPU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile b/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile deleted file mode 100644 index 43b51f622..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - extfunc.c main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h deleted file mode 100644 index 7ff9a1440..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c b/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c deleted file mode 100644 index 0418e3124..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -float ff1(float par) { - return par; -} - -float ff2(float par1, float par2, float par3, float par4) { - return (par1 + par2) * (par3 + par4); -} diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h deleted file mode 100644 index 40207d045..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp deleted file mode 100644 index 186319a4c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp +++ /dev/null @@ -1,2292 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - General - 3 - - 21 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 21 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - board - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c - - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h - - - - os - - hal - - include - - $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\can.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\can.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c - - - - - kernel - - include - - $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c - - - - - platform - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h - - - - port - - STM32F4xx - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s - - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - test - - $PROJ_DIR$\..\..\..\..\test\test.c - - - $PROJ_DIR$\..\..\..\..\test\test.h - - - $PROJ_DIR$\..\..\..\..\test\testbmk.c - - - $PROJ_DIR$\..\..\..\..\test\testbmk.h - - - $PROJ_DIR$\..\..\..\..\test\testdyn.c - - - $PROJ_DIR$\..\..\..\..\test\testdyn.h - - - $PROJ_DIR$\..\..\..\..\test\testevt.c - - - $PROJ_DIR$\..\..\..\..\test\testevt.h - - - $PROJ_DIR$\..\..\..\..\test\testheap.c - - - $PROJ_DIR$\..\..\..\..\test\testheap.h - - - $PROJ_DIR$\..\..\..\..\test\testmbox.c - - - $PROJ_DIR$\..\..\..\..\test\testmbox.h - - - $PROJ_DIR$\..\..\..\..\test\testmsg.c - - - $PROJ_DIR$\..\..\..\..\test\testmsg.h - - - $PROJ_DIR$\..\..\..\..\test\testmtx.c - - - $PROJ_DIR$\..\..\..\..\test\testmtx.h - - - $PROJ_DIR$\..\..\..\..\test\testpools.c - - - $PROJ_DIR$\..\..\..\..\test\testpools.h - - - $PROJ_DIR$\..\..\..\..\test\testqueues.c - - - $PROJ_DIR$\..\..\..\..\test\testqueues.h - - - $PROJ_DIR$\..\..\..\..\test\testsem.c - - - $PROJ_DIR$\..\..\..\..\test\testsem.h - - - $PROJ_DIR$\..\..\..\..\test\testthd.c - - - $PROJ_DIR$\..\..\..\..\test\testthd.h - - - - $PROJ_DIR$\..\chconf.h - - - $PROJ_DIR$\..\extfunc.c - - - $PROJ_DIR$\..\halconf.h - - - $PROJ_DIR$\..\main.c - - - $PROJ_DIR$\..\mcuconf.h - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww deleted file mode 100644 index f9b3b2000..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\ch.ewp - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf deleted file mode 100644 index c0a51f44c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf +++ /dev/null @@ -1,39 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x400; -/**** End of ICF editor section. ###ICF###*/ - -/* Size of the IRQ Stack (Main Stack).*/ -define symbol __ICFEDIT_size_irqstack__ = 0x400; - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; -define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; -define block SYSHEAP with alignment = 8 {section SYSHEAP}; -define block DATABSS with alignment = 8 {readwrite, zeroinit}; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section .intvec }; - -place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; -place in ROM_region {readonly}; -place at start of RAM_region {block IRQSTACK}; -place in RAM_region {block DATABSS, block HEAP}; -place in RAM_region {block SYSHEAP}; -place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj b/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj deleted file mode 100644 index 0f02f5523..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj +++ /dev/null @@ -1,945 +0,0 @@ - - - - 1.1 - -
### uVision Project, (C) Keil Software
- - - - Demo - 0x4 - ARM-ADS - - - STM32F407VG - STMicroelectronics - IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 - - "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") - UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) - 6103 - stm32f4xx.h - - - - - - - - - - SFD\ST\STM32F4xx\STM32F4xx.sfr - 0 - - - - ST\STM32F4xx\ - ST\STM32F4xx\ - - 0 - 0 - 0 - 0 - 1 - - .\obj\ - ch - 1 - 0 - 0 - 1 - 1 - .\lst\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - - - SARMCM3.DLL - -MPU - DCM.DLL - -pCM4 - SARMCM3.DLL - -MPU - TCM.DLL - -pCM4 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - - - 1 - 1 - 0 - 1 - 1 - 1 - 0 - 1 - - 0 - 8 - - - - - - - - - - - - - - STLink\ST-LINKIII-KEIL.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4100 - - STLink\ST-LINKIII-KEIL.dll - "" () - - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M4" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 2 - 1 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 1 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 1 - 0x8000000 - 0x100000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x100000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 0 - 0x20020000 - 0x1 - - - - - - 1 - 4 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base - - ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - - --cpreproc - - - ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - - - - - - - - board - - - board.c - 1 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c - - - board.h - 5 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h - - - - - port - - - cstartup.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s - - - chcoreasm_v7m.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s - - - chcore.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c - - - chcore_v7m.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c - - - chcore.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h - - - chcore_v7m.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h - - - chtypes.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h - - - cmparams.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h - - - vectors.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s - - - nvic.c - 1 - ..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - nvic.h - 5 - ..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - kernel - - - chcond.c - 1 - ..\..\..\..\os\kernel\src\chcond.c - - - chdebug.c - 1 - ..\..\..\..\os\kernel\src\chdebug.c - - - chdynamic.c - 1 - ..\..\..\..\os\kernel\src\chdynamic.c - - - chevents.c - 1 - ..\..\..\..\os\kernel\src\chevents.c - - - chheap.c - 1 - ..\..\..\..\os\kernel\src\chheap.c - - - chlists.c - 1 - ..\..\..\..\os\kernel\src\chlists.c - - - chmboxes.c - 1 - ..\..\..\..\os\kernel\src\chmboxes.c - - - chmemcore.c - 1 - ..\..\..\..\os\kernel\src\chmemcore.c - - - chmempools.c - 1 - ..\..\..\..\os\kernel\src\chmempools.c - - - chmsg.c - 1 - ..\..\..\..\os\kernel\src\chmsg.c - - - chmtx.c - 1 - ..\..\..\..\os\kernel\src\chmtx.c - - - chqueues.c - 1 - ..\..\..\..\os\kernel\src\chqueues.c - - - chregistry.c - 1 - ..\..\..\..\os\kernel\src\chregistry.c - - - chschd.c - 1 - ..\..\..\..\os\kernel\src\chschd.c - - - chsem.c - 1 - ..\..\..\..\os\kernel\src\chsem.c - - - chsys.c - 1 - ..\..\..\..\os\kernel\src\chsys.c - - - chthreads.c - 1 - ..\..\..\..\os\kernel\src\chthreads.c - - - chvt.c - 1 - ..\..\..\..\os\kernel\src\chvt.c - - - ch.h - 5 - ..\..\..\..\os\kernel\include\ch.h - - - chbsem.h - 5 - ..\..\..\..\os\kernel\include\chbsem.h - - - chcond.h - 5 - ..\..\..\..\os\kernel\include\chcond.h - - - chdebug.h - 5 - ..\..\..\..\os\kernel\include\chdebug.h - - - chdynamic.h - 5 - ..\..\..\..\os\kernel\include\chdynamic.h - - - chevents.h - 5 - ..\..\..\..\os\kernel\include\chevents.h - - - chfiles.h - 5 - ..\..\..\..\os\kernel\include\chfiles.h - - - chheap.h - 5 - ..\..\..\..\os\kernel\include\chheap.h - - - chinline.h - 5 - ..\..\..\..\os\kernel\include\chinline.h - - - chioch.h - 5 - ..\..\..\..\os\kernel\include\chioch.h - - - chlists.h - 5 - ..\..\..\..\os\kernel\include\chlists.h - - - chmboxes.h - 5 - ..\..\..\..\os\kernel\include\chmboxes.h - - - chmemcore.h - 5 - ..\..\..\..\os\kernel\include\chmemcore.h - - - chmempools.h - 5 - ..\..\..\..\os\kernel\include\chmempools.h - - - chmsg.h - 5 - ..\..\..\..\os\kernel\include\chmsg.h - - - chmtx.h - 5 - ..\..\..\..\os\kernel\include\chmtx.h - - - chqueues.h - 5 - ..\..\..\..\os\kernel\include\chqueues.h - - - chregistry.h - 5 - ..\..\..\..\os\kernel\include\chregistry.h - - - chschd.h - 5 - ..\..\..\..\os\kernel\include\chschd.h - - - chsem.h - 5 - ..\..\..\..\os\kernel\include\chsem.h - - - chstreams.h - 5 - ..\..\..\..\os\kernel\include\chstreams.h - - - chsys.h - 5 - ..\..\..\..\os\kernel\include\chsys.h - - - chthreads.h - 5 - ..\..\..\..\os\kernel\include\chthreads.h - - - chvt.h - 5 - ..\..\..\..\os\kernel\include\chvt.h - - - - - hal - - - hal.c - 1 - ..\..\..\..\os\hal\src\hal.c - - - pal.c - 1 - ..\..\..\..\os\hal\src\pal.c - - - serial.c - 1 - ..\..\..\..\os\hal\src\serial.c - - - hal.h - 5 - ..\..\..\..\os\hal\include\hal.h - - - pal.h - 5 - ..\..\..\..\os\hal\include\pal.h - - - serial.h - 5 - ..\..\..\..\os\hal\include\serial.h - - - gpt.h - 5 - ..\..\..\..\os\hal\include\gpt.h - - - gpt.c - 1 - ..\..\..\..\os\hal\src\gpt.c - - - - - platform - - - gpt_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - gpt_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - hal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c - - - hal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h - - - pal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - pal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - serial_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - serial_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - stm32_dma.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c - - - stm32_dma.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h - - - stm32_rcc.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h - - - stm32l1xx.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h - - - - - test - - - test.c - 1 - ..\..\..\..\test\test.c - - - testbmk.c - 1 - ..\..\..\..\test\testbmk.c - - - testdyn.c - 1 - ..\..\..\..\test\testdyn.c - - - testevt.c - 1 - ..\..\..\..\test\testevt.c - - - testheap.c - 1 - ..\..\..\..\test\testheap.c - - - testmbox.c - 1 - ..\..\..\..\test\testmbox.c - - - testmsg.c - 1 - ..\..\..\..\test\testmsg.c - - - testmtx.c - 1 - ..\..\..\..\test\testmtx.c - - - testpools.c - 1 - ..\..\..\..\test\testpools.c - - - testqueues.c - 1 - ..\..\..\..\test\testqueues.c - - - testsem.c - 1 - ..\..\..\..\test\testsem.c - - - testthd.c - 1 - ..\..\..\..\test\testthd.c - - - test.h - 5 - ..\..\..\..\test\test.h - - - testbmk.h - 5 - ..\..\..\..\test\testbmk.h - - - testdyn.h - 5 - ..\..\..\..\test\testdyn.h - - - testevt.h - 5 - ..\..\..\..\test\testevt.h - - - testheap.h - 5 - ..\..\..\..\test\testheap.h - - - testmbox.h - 5 - ..\..\..\..\test\testmbox.h - - - testmsg.h - 5 - ..\..\..\..\test\testmsg.h - - - testmtx.h - 5 - ..\..\..\..\test\testmtx.h - - - testpools.h - 5 - ..\..\..\..\test\testpools.h - - - testqueues.h - 5 - ..\..\..\..\test\testqueues.h - - - testsem.h - 5 - ..\..\..\..\test\testsem.h - - - testthd.h - 5 - ..\..\..\..\test\testthd.h - - - - - demo - - - main.c - 1 - ..\main.c - - - mcuconf.h - 5 - ..\mcuconf.h - - - chconf.h - 5 - ..\chconf.h - - - halconf.h - 5 - ..\halconf.h - - - extfunc.c - 1 - ..\extfunc.c - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/main.c b/testhal/STM32F4xx/IRQ_STORM_FPU/main.c deleted file mode 100644 index 7ec769a9c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/main.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -float ff1(float par); - -float ff2(float par1, float par2, float par3, float par4); - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -static bool saturated; - -/* - * Test worker thread. - */ -static THD_WORKING_AREA(waWorkerThread, 128); -static msg_t WorkerThread(void *arg) { - - (void)arg; - - while(1) { - float f1, f2, f3, f4, f5; - - f1 = ff1(3.0f); - f2 = ff1(4.0f); - f3 = ff1(5.0f); - f5 = f1 + f2 + f3; - f4 = ff1(6.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 324.0f) - chSysHalt("float corrupion #1"); - } -} - -/* - * Test periodic thread. - */ -static THD_WORKING_AREA(waPeriodicThread, 128); -static msg_t PeriodicThread(void *arg) { - - (void)arg; - - while(1) { - float f1, f2, f3, f4, f5; - - f1 = ff1(4.0f); - f2 = ff1(5.0f); - f3 = ff1(6.0f); - f5 = f1 + f2 + f3; - f4 = ff1(7.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 484.0f) - chSysHalt("float corrupion #2"); - chThdSleepSeconds(1); - } -} - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - float f1, f2, f3, f4, f5; - - (void)gptp; - - f1 = ff1(2.0f); - f2 = ff1(3.0f); - f3 = ff1(4.0f); - f5 = f1 + f2 + f3; - f4 = ff1(5.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 196.0f) - chSysHalt("float corrupion #3"); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - float f1, f2, f3, f4, f5; - - (void)gptp; - - f1 = ff1(1.0f); - f2 = ff1(2.0f); - f3 = ff1(3.0f); - f5 = f1 + f2 + f3; - f4 = ff1(4.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 100.0f) - chSysHalt("float corrupion #4"); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 2 and 3. - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - gptStart(&GPTD4, &gpt4cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the worker threads. - */ - chThdCreateStatic(waWorkerThread, sizeof waWorkerThread, - NORMALPRIO - 20, WorkerThread, NULL); - chThdCreateStatic(waPeriodicThread, sizeof waPeriodicThread, - NORMALPRIO - 10, PeriodicThread, NULL); - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM-FPU long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h deleted file mode 100644 index 9fca1da26..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt b/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt deleted file mode 100644 index cb043261f..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM_FPU stress test demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT, PAL and Serial -drivers in order to implement a system stress demo involving the FPU. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using YAGARTO 4.6.2. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/PWM-ICU/.cproject b/testhal/STM32F4xx/PWM-ICU/.cproject deleted file mode 100644 index 681cedec5..000000000 --- a/testhal/STM32F4xx/PWM-ICU/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/PWM-ICU/.project b/testhal/STM32F4xx/PWM-ICU/.project deleted file mode 100644 index c11e50bc5..000000000 --- a/testhal/STM32F4xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/PWM-ICU/Makefile b/testhal/STM32F4xx/PWM-ICU/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/PWM-ICU/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/PWM-ICU/chconf.h b/testhal/STM32F4xx/PWM-ICU/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/PWM-ICU/halconf.h b/testhal/STM32F4xx/PWM-ICU/halconf.h deleted file mode 100644 index c1a492c2d..000000000 --- a/testhal/STM32F4xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/PWM-ICU/main.c b/testhal/STM32F4xx/PWM-ICU/main.c deleted file mode 100644 index a964d221e..000000000 --- a/testhal/STM32F4xx/PWM-ICU/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOD, GPIOD_LED5); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOD, GPIOD_LED5); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOD, GPIOD_LED4); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOD, GPIOD_LED4); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA8 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD1, &pwmcfg); - palSetPadMode(GPIOA, 8, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD1, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOD, GPIOD_LED4); - palClearPad(GPIOD, GPIOD_LED5); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/PWM-ICU/mcuconf.h b/testhal/STM32F4xx/PWM-ICU/mcuconf.h deleted file mode 100644 index 0a70a1cd1..000000000 --- a/testhal/STM32F4xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/PWM-ICU/readme.txt b/testhal/STM32F4xx/PWM-ICU/readme.txt deleted file mode 100644 index a2b9d67a5..000000000 --- a/testhal/STM32F4xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx PWM-ICU drivers. - -** Board Setup ** - -- Connect PA8 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/RTC/.cproject b/testhal/STM32F4xx/RTC/.cproject deleted file mode 100644 index 698b866bf..000000000 --- a/testhal/STM32F4xx/RTC/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/RTC/.project b/testhal/STM32F4xx/RTC/.project deleted file mode 100644 index b281eb7d2..000000000 --- a/testhal/STM32F4xx/RTC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-RTC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/RTC/Makefile b/testhal/STM32F4xx/RTC/Makefile deleted file mode 100644 index 1eb858fbd..000000000 --- a/testhal/STM32F4xx/RTC/Makefile +++ /dev/null @@ -1,208 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/RTC/chconf.h b/testhal/STM32F4xx/RTC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/RTC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC/halconf.h b/testhal/STM32F4xx/RTC/halconf.h deleted file mode 100644 index 76a560cdd..000000000 --- a/testhal/STM32F4xx/RTC/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC/main.c b/testhal/STM32F4xx/RTC/main.c deleted file mode 100644 index 6b25d371a..000000000 --- a/testhal/STM32F4xx/RTC/main.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* -This structure is used to hold the values representing a calendar time. -It contains the following members, with the meanings as shown. - -int tm_sec seconds after minute [0-61] (61 allows for 2 leap-seconds) -int tm_min minutes after hour [0-59] -int tm_hour hours after midnight [0-23] -int tm_mday day of the month [1-31] -int tm_mon month of year [0-11] -int tm_year current year-1900 -int tm_wday days since Sunday [0-6] -int tm_yday days since January 1st [0-365] -int tm_isdst daylight savings indicator (1 = yes, 0 = no, -1 = unknown) -*/ -#define WAKEUP_TEST FALSE - -#include -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" -#include "chrtclib.h" - -#if WAKEUP_TEST -static RTCWakeup wakeupspec; -#endif -static RTCAlarm alarmspec; -static time_t unix_time; - -/* libc stub */ -int _getpid(void) {return 1;} -/* libc stub */ -void _exit(int i) {(void)i;} -/* libc stub */ -#include -#undef errno -extern int errno; -int _kill(int pid, int sig) { - (void)pid; - (void)sig; - errno = EINVAL; - return -1; -} - - -/* sleep indicator thread */ -static WORKING_AREA(blinkWA, 128); -static msg_t blink_thd(void *arg){ - (void)arg; - while (TRUE) { - chThdSleepMilliseconds(100); - palTogglePad(GPIOB, GPIOB_LED_R); - } - return 0; -} - -static void func_sleep(void){ - chSysLock(); - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - PWR->CR |= (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_CSBF | PWR_CR_CWUF); - RTC->ISR &= ~(RTC_ISR_ALRBF | RTC_ISR_ALRAF | RTC_ISR_WUTF | RTC_ISR_TAMP1F | - RTC_ISR_TSOVF | RTC_ISR_TSF); - __WFI(); -} - -static void cmd_sleep(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: sleep\r\n"); - return; - } - chprintf(chp, "Going to sleep.\r\n"); - - chThdSleepMilliseconds(200); - - /* going to anabiosis */ - func_sleep(); -} - -/* - * - */ -static void cmd_alarm(BaseSequentialStream *chp, int argc, char *argv[]){ - int i = 0; - - (void)argv; - if (argc < 1) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - rtcGetAlarm(&RTCD1, 0, &alarmspec); - chprintf(chp, "%D%s",alarmspec," - alarm in STM internal format\r\n"); - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - i = atol(argv[1]); - alarmspec.tv_datetime = ((i / 10) & 7 << 4) | (i % 10) | RTC_ALRMAR_MSK4 | - RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2; - rtcSetAlarm(&RTCD1, 0, &alarmspec); - return; - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: alarm get\r\n"); - chprintf(chp, " alarm set N\r\n"); - chprintf(chp, "where N is alarm time in seconds\r\n"); -} - -/* - * - */ -static void cmd_date(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - struct tm timp; - - if (argc == 0) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - unix_time = rtcGetTimeUnixSec(&RTCD1); - - if (unix_time == -1){ - chprintf(chp, "incorrect time in RTC cell\r\n"); - } - else{ - chprintf(chp, "%D%s",unix_time," - unix time\r\n"); - rtcGetTimeTm(&RTCD1, &timp); - chprintf(chp, "%s%s",asctime(&timp)," - formatted time string\r\n"); - } - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - unix_time = atol(argv[1]); - if (unix_time > 0){ - rtcSetTimeUnixSec(&RTCD1, unix_time); - return; - } - else{ - goto ERROR; - } - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: date get\r\n"); - chprintf(chp, " date set N\r\n"); - chprintf(chp, "where N is time in seconds sins Unix epoch\r\n"); - chprintf(chp, "you can get current N value from unix console by the command\r\n"); - chprintf(chp, "%s", "date +\%s\r\n"); - return; -} - -static SerialConfig ser_cfg = { - 115200, - 0, - 0, - 0, -}; - -static const ShellCommand commands[] = { - {"alarm", cmd_alarm}, - {"date", cmd_date}, - {"sleep", cmd_sleep}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD2, - commands -}; - - -/** - * Main function. - */ -int main(void){ - - halInit(); - chSysInit(); - chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL); - -#if !WAKEUP_TEST - /* switch off wakeup */ - rtcSetPeriodicWakeup_v2(&RTCD1, NULL); - - /* Shell initialization.*/ - sdStart(&SD2, &ser_cfg); - shellInit(); - static WORKING_AREA(waShell, 1024); - shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); - - /* wait until user do not want to test wakeup */ - while (TRUE){ - chThdSleepMilliseconds(200); - } - -#else - /* set wakeup */ - wakeupspec.wakeup = ((uint32_t)4) << 16; /* select 1 Hz clock source */ - wakeupspec.wakeup |= 9; /* set counter value to 9. Period will be 9+1 seconds. */ - rtcSetPeriodicWakeup_v2(&RTCD1, &wakeupspec); - - chThdSleepSeconds(3); - func_sleep(); -#endif /* !WAKEUP_TEST */ - - return 0; -} - - diff --git a/testhal/STM32F4xx/RTC/mcuconf.h b/testhal/STM32F4xx/RTC/mcuconf.h deleted file mode 100644 index 14aca7564..000000000 --- a/testhal/STM32F4xx/RTC/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED TRUE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/SDC/.cproject b/testhal/STM32F4xx/SDC/.cproject deleted file mode 100644 index 5315ed60f..000000000 --- a/testhal/STM32F4xx/SDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/SDC/.project b/testhal/STM32F4xx/SDC/.project deleted file mode 100644 index 665aec725..000000000 --- a/testhal/STM32F4xx/SDC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-SDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/OLIMEX_STM32_E407 - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/SDC/Makefile b/testhal/STM32F4xx/SDC/Makefile deleted file mode 100644 index c7a90fa3b..000000000 --- a/testhal/STM32F4xx/SDC/Makefile +++ /dev/null @@ -1,205 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_E407/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/shell.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/SDC/chconf.h b/testhal/STM32F4xx/SDC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/SDC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SDC/halconf.h b/testhal/STM32F4xx/SDC/halconf.h deleted file mode 100644 index ec7ffc153..000000000 --- a/testhal/STM32F4xx/SDC/halconf.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC TRUE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_WRITE_TIMEOUT_MS 250 -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_READ_TIMEOUT_MS 5 -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SDC/main.c b/testhal/STM32F4xx/SDC/main.c deleted file mode 100644 index 264f31133..000000000 --- a/testhal/STM32F4xx/SDC/main.c +++ /dev/null @@ -1,223 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#include "chprintf.h" -#include "shell.h" - -/* - * SDIO configuration. - */ -static const SDCConfig sdccfg = { - 0 -}; - -/* - * LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(500); - } -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -#define SDC_BURST_SIZE 16 - -/* Buffer for block read/write operations, note that an extra byte is - allocated in order to support unaligned operations.*/ -static uint8_t buf[MMCSD_BLOCK_SIZE * SDC_BURST_SIZE + 1]; - -void cmd_sdc(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *mode[] = {"SDV11", "SDV20", "MMC", NULL}; - systime_t start, end; - uint32_t n, startblk; - - if (argc != 1) { - chprintf(chp, "Usage: sdiotest read|write|all\r\n"); - return; - } - - /* Card presence check.*/ - if (!blkIsInserted(&SDCD1)) { - chprintf(chp, "Card not inserted, aborting.\r\n"); - return; - } - - /* Connection to the card.*/ - chprintf(chp, "Connecting... "); - if (sdcConnect(&SDCD1)) { - chprintf(chp, "failed\r\n"); - return; - } - chprintf(chp, "OK\r\n\r\nCard Info\r\n"); - chprintf(chp, "CSD : %08X %8X %08X %08X \r\n", - SDCD1.csd[3], SDCD1.csd[2], SDCD1.csd[1], SDCD1.csd[0]); - chprintf(chp, "CID : %08X %8X %08X %08X \r\n", - SDCD1.cid[3], SDCD1.cid[2], SDCD1.cid[1], SDCD1.cid[0]); - chprintf(chp, "Mode : %s\r\n", mode[SDCD1.cardmode]); - chprintf(chp, "Capacity : %DMB\r\n", SDCD1.capacity / 2048); - - /* The test is performed in the middle of the flash area.*/ - startblk = (SDCD1.capacity / MMCSD_BLOCK_SIZE) / 2; - - if ((strcmp(argv[0], "read") == 0) || - (strcmp(argv[0], "all") == 0)) { - - /* Single block read performance, aligned.*/ - chprintf(chp, "Single block aligned read performance: "); - start = chVTGetSystemTime(); - end = start + MS2ST(1000); - n = 0; - do { - if (blkRead(&SDCD1, startblk, buf, 1)) { - chprintf(chp, "failed\r\n"); - goto exittest; - } - n++; - } while (chVTIsSystemTimeWithin(start, end)); - chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); - - /* Multiple sequential blocks read performance, aligned.*/ - chprintf(chp, "16 sequential blocks aligned read performance: "); - start = chVTGetSystemTime(); - end = start + MS2ST(1000); - n = 0; - do { - if (blkRead(&SDCD1, startblk, buf, SDC_BURST_SIZE)) { - chprintf(chp, "failed\r\n"); - goto exittest; - } - n += SDC_BURST_SIZE; - } while (chVTIsSystemTimeWithin(start, end)); - chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); - -#if STM32_SDC_SDIO_UNALIGNED_SUPPORT - /* Single block read performance, unaligned.*/ - chprintf(chp, "Single block unaligned read performance: "); - start = chVTGetSystemTime(); - end = start + MS2ST(1000); - n = 0; - do { - if (blkRead(&SDCD1, startblk, buf + 1, 1)) { - chprintf(chp, "failed\r\n"); - goto exittest; - } - n++; - } while (chVTIsSystemTimeWithin(start, end)); - chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); - - /* Multiple sequential blocks read performance, unaligned.*/ - chprintf(chp, "16 sequential blocks unaligned read performance: "); - start = chVTGetSystemTime(); - end = start + MS2ST(1000); - n = 0; - do { - if (blkRead(&SDCD1, startblk, buf + 1, SDC_BURST_SIZE)) { - chprintf(chp, "failed\r\n"); - goto exittest; - } - n += SDC_BURST_SIZE; - } while (chVTIsSystemTimeWithin(start, end)); - chprintf(chp, "%D blocks/S, %D bytes/S\r\n", n, n * MMCSD_BLOCK_SIZE); -#endif /* STM32_SDC_SDIO_UNALIGNED_SUPPORT */ - } - - if ((strcmp(argv[0], "write") == 0) || - (strcmp(argv[0], "all") == 0)) { - - } - - /* Card disconnect and command end.*/ -exittest: - sdcDisconnect(&SDCD1); -} - -static const ShellCommand commands[] = { - {"sdc", cmd_sdc}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD6, - commands -}; - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Activates the serial driver 6 using the driver default configuration. - */ - sdStart(&SD6, NULL); - - /* - * Initializes the SDIO drivers. - */ - sdcStart(&SDCD1, &sdccfg); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (!shelltp) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F4xx/SDC/mcuconf.h b/testhal/STM32F4xx/SDC/mcuconf.h deleted file mode 100644 index 62f693419..000000000 --- a/testhal/STM32F4xx/SDC/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 12 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 TRUE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/SDC/readme.txt b/testhal/STM32F4xx/SDC/readme.txt deleted file mode 100644 index 1daeb6c94..000000000 --- a/testhal/STM32F4xx/SDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-E407 board. - -** The Demo ** - -The application demonstrates the use of the STM32 SDC driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/SPI/.cproject b/testhal/STM32F4xx/SPI/.cproject deleted file mode 100644 index e05dca097..000000000 --- a/testhal/STM32F4xx/SPI/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/SPI/.project b/testhal/STM32F4xx/SPI/.project deleted file mode 100644 index cbee7f6e6..000000000 --- a/testhal/STM32F4xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/SPI/Makefile b/testhal/STM32F4xx/SPI/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/SPI/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/SPI/chconf.h b/testhal/STM32F4xx/SPI/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SPI/halconf.h b/testhal/STM32F4xx/SPI/halconf.h deleted file mode 100644 index 99f546dd1..000000000 --- a/testhal/STM32F4xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SPI/main.c b/testhal/STM32F4xx/SPI/main.c deleted file mode 100644 index 3028c2113..000000000 --- a/testhal/STM32F4xx/SPI/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -/* - * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOD, GPIOD_LED5); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOD, GPIOD_LED5); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/SPI/mcuconf.h b/testhal/STM32F4xx/SPI/mcuconf.h deleted file mode 100644 index 2df7c0f29..000000000 --- a/testhal/STM32F4xx/SPI/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/SPI/readme.txt b/testhal/STM32F4xx/SPI/readme.txt deleted file mode 100644 index d3d78bc8c..000000000 --- a/testhal/STM32F4xx/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/UART/.cproject b/testhal/STM32F4xx/UART/.cproject deleted file mode 100644 index 7bb8c14a7..000000000 --- a/testhal/STM32F4xx/UART/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/UART/.project b/testhal/STM32F4xx/UART/.project deleted file mode 100644 index 8ba48d6a8..000000000 --- a/testhal/STM32F4xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/UART/Makefile b/testhal/STM32F4xx/UART/Makefile deleted file mode 100644 index 12616439a..000000000 --- a/testhal/STM32F4xx/UART/Makefile +++ /dev/null @@ -1,203 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/UART/chconf.h b/testhal/STM32F4xx/UART/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/UART/halconf.h b/testhal/STM32F4xx/UART/halconf.h deleted file mode 100644 index e9b103442..000000000 --- a/testhal/STM32F4xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/UART/main.c b/testhal/STM32F4xx/UART/main.c deleted file mode 100644 index 3f01dc1a1..000000000 --- a/testhal/STM32F4xx/UART/main.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt3, vt4, vt5; - -static const uint8_t message[] = "0123456789ABCDEF"; -static uint8_t buffer[16]; - -static void led3off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED3); -} - -static void led4off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED4); -} - -static void led5off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromISR(); - chVTResetI(&vt5); - chVTSetI(&vt5, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOD, GPIOD_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; - - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOD, GPIOD_LED3); - chSysLockFromISR(); - chVTResetI(&vt3); - chVTSetI(&vt3, MS2ST(200), led3off, NULL); - chSysUnlockFromISR(); -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the UART driver 2, PA2(TX) and PA3(RX) are routed to USART2. - */ - uartStart(&UARTD2, &uart_cfg_1); - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - /* - * Starts both a transmission and a receive operations, both will be - * handled entirely in background. - */ - uartStopReceive(&UARTD2); - uartStopSend(&UARTD2); - uartStartReceive(&UARTD2, 16, buffer); - uartStartSend(&UARTD2, 16, message); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F4xx/UART/mcuconf.h b/testhal/STM32F4xx/UART/mcuconf.h deleted file mode 100644 index 1ed301f80..000000000 --- a/testhal/STM32F4xx/UART/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USE_UART4 TRUE -#define STM32_UART_USE_UART5 TRUE -#define STM32_UART_USE_USART6 TRUE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/UART/readme.txt b/testhal/STM32F4xx/UART/readme.txt deleted file mode 100644 index 19a8e26da..000000000 --- a/testhal/STM32F4xx/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA2(TX) and PA3(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/USB_CDC/.cproject b/testhal/STM32F4xx/USB_CDC/.cproject deleted file mode 100644 index 16a94a05d..000000000 --- a/testhal/STM32F4xx/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/USB_CDC/.project b/testhal/STM32F4xx/USB_CDC/.project deleted file mode 100644 index defd5f312..000000000 --- a/testhal/STM32F4xx/USB_CDC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F4xx/USB_CDC/Makefile b/testhal/STM32F4xx/USB_CDC/Makefile deleted file mode 100644 index 41b4492a1..000000000 --- a/testhal/STM32F4xx/USB_CDC/Makefile +++ /dev/null @@ -1,205 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_E407/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f4xx.mk -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32F4xx/USB_CDC/chconf.h b/testhal/STM32F4xx/USB_CDC/chconf.h deleted file mode 100644 index b6ca0aa69..000000000 --- a/testhal/STM32F4xx/USB_CDC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/USB_CDC/halconf.h b/testhal/STM32F4xx/USB_CDC/halconf.h deleted file mode 100644 index bb8ebc123..000000000 --- a/testhal/STM32F4xx/USB_CDC/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/USB_CDC/main.c b/testhal/STM32F4xx/USB_CDC/main.c deleted file mode 100644 index dd01ecb25..000000000 --- a/testhal/STM32F4xx/USB_CDC/main.c +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD2. - */ -#define USBD2_DATA_REQUEST_EP 1 -#define USBD2_DATA_AVAILABLE_EP 1 -#define USBD2_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU2; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU2); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD2, - USBD2_DATA_REQUEST_EP, - USBD2_DATA_AVAILABLE_EP, - USBD2_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU2, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU2, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time; - - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(time); - palSetPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - static THD_WORKING_AREA(wa_usb_lld_pump, STM32_USB_OTG_THREAD_STACK_SIZE); - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU2); - sduStart(&SDU2, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - chThdCreateStatic(wa_usb_lld_pump, sizeof(wa_usb_lld_pump), - STM32_USB_OTG_THREAD_PRIO, usb_lld_pump, serusbcfg.usbp); - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Stopping and restarting the USB in order to test the stop procedure. The - * following lines are not usually required. - */ - chThdSleepMilliseconds(3000); - usbDisconnectBus(serusbcfg.usbp); - usbStop(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU2.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F4xx/USB_CDC/mcuconf.h b/testhal/STM32F4xx/USB_CDC/mcuconf.h deleted file mode 100644 index 160f4afec..000000000 --- a/testhal/STM32F4xx/USB_CDC/mcuconf.h +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 12 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_USE_OTG2 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/USB_CDC/readme.txt b/testhal/STM32F4xx/USB_CDC/readme.txt deleted file mode 100644 index a619a3ec1..000000000 --- a/testhal/STM32F4xx/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-E407 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB (OTG) driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/ADC/.cproject b/testhal/STM32L1xx/ADC/.cproject deleted file mode 100644 index dd444dc30..000000000 --- a/testhal/STM32L1xx/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/ADC/.project b/testhal/STM32L1xx/ADC/.project deleted file mode 100644 index 1cd6361af..000000000 --- a/testhal/STM32L1xx/ADC/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/ADC/Makefile b/testhal/STM32L1xx/ADC/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/ADC/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/ADC/chconf.h b/testhal/STM32L1xx/ADC/chconf.h deleted file mode 100644 index 68af751f1..000000000 --- a/testhal/STM32L1xx/ADC/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/ADC/halconf.h b/testhal/STM32L1xx/ADC/halconf.h deleted file mode 100644 index 23d81defc..000000000 --- a/testhal/STM32L1xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/ADC/main.c b/testhal/STM32L1xx/ADC/main.c deleted file mode 100644 index 8a2b3897b..000000000 --- a/testhal/STM32L1xx/ADC/main.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN10(ADC_SAMPLE_4), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, 0, 0, /* SQR2, SQR3, SQR4 */ - ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN11(ADC_SAMPLE_48) | ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | - ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192) | ADC_SMPR2_SMP_VREF(ADC_SAMPLE_192), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - 0, 0, /* SQR2, SQR3 */ - ADC_SQR4_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR4_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR5_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ5_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ3_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - palClearPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32L1xx/ADC/mcuconf.h b/testhal/STM32L1xx/ADC/mcuconf.h deleted file mode 100644 index 4f936d8b3..000000000 --- a/testhal/STM32L1xx/ADC/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/ADC/readme.txt b/testhal/STM32L1xx/ADC/readme.txt deleted file mode 100644 index 91e9574b3..000000000 --- a/testhal/STM32L1xx/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx ADC driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PC0 to 3.3V and PC1 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/EXT/.cproject b/testhal/STM32L1xx/EXT/.cproject deleted file mode 100644 index 2148e6575..000000000 --- a/testhal/STM32L1xx/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/EXT/.project b/testhal/STM32L1xx/EXT/.project deleted file mode 100644 index 07851af6f..000000000 --- a/testhal/STM32L1xx/EXT/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/EXT/Makefile b/testhal/STM32L1xx/EXT/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/EXT/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/EXT/chconf.h b/testhal/STM32L1xx/EXT/chconf.h deleted file mode 100644 index 68af751f1..000000000 --- a/testhal/STM32L1xx/EXT/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/EXT/halconf.h b/testhal/STM32L1xx/EXT/halconf.h deleted file mode 100644 index aafa92685..000000000 --- a/testhal/STM32L1xx/EXT/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/EXT/main.c b/testhal/STM32L1xx/EXT/main.c deleted file mode 100644 index 218826786..000000000 --- a/testhal/STM32L1xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTDoSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32L1xx/EXT/mcuconf.h b/testhal/STM32L1xx/EXT/mcuconf.h deleted file mode 100644 index 753e83df3..000000000 --- a/testhal/STM32L1xx/EXT/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/EXT/readme.txt b/testhal/STM32L1xx/EXT/readme.txt deleted file mode 100644 index 16953a3c9..000000000 --- a/testhal/STM32L1xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/IRQ_STORM/.cproject b/testhal/STM32L1xx/IRQ_STORM/.cproject deleted file mode 100644 index 5b23e9f4d..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/IRQ_STORM/.project b/testhal/STM32L1xx/IRQ_STORM/.project deleted file mode 100644 index 9fd81bee3..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/IRQ_STORM/Makefile b/testhal/STM32L1xx/IRQ_STORM/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/IRQ_STORM/chconf.h b/testhal/STM32L1xx/IRQ_STORM/chconf.h deleted file mode 100644 index a1963f74c..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/IRQ_STORM/halconf.h b/testhal/STM32L1xx/IRQ_STORM/halconf.h deleted file mode 100644 index 8a0de4278..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/IRQ_STORM/main.c b/testhal/STM32L1xx/IRQ_STORM/main.c deleted file mode 100644 index c66bd7e13..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/main.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool saturated; - -/* - * Mailboxes and buffers. - */ -static mailbox_t mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static THD_WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != MSG_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOB, GPIOB_LED4); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt4cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromISR(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != MSG_OK) - saturated = TRUE; - chSysUnlockFromISR(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt4cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt4cb, /* Timer callback.*/ - 0, - 0 -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb, /* Timer callback.*/ - 0, - 0 -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* - * Activates GPTs. - */ - gptStart(&GPTD4, &gpt4cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBObjectInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef PORT_COMPILER_NAME - print("*** Compiler: "); - println(PORT_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(PORT_ARCHITECTURE_NAME); -#ifdef PORT_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(PORT_CORE_VARIANT_NAME); -#endif -#ifdef PORT_INFO - print("*** Port Info: "); - println(PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD4, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD4); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32L1xx/IRQ_STORM/mcuconf.h b/testhal/STM32L1xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 50ded9f4a..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 6 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/IRQ_STORM/readme.txt b/testhal/STM32L1xx/IRQ_STORM/readme.txt deleted file mode 100644 index 9483b1f02..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/PWM-ICU/.cproject b/testhal/STM32L1xx/PWM-ICU/.cproject deleted file mode 100644 index b96ec18ee..000000000 --- a/testhal/STM32L1xx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/PWM-ICU/.project b/testhal/STM32L1xx/PWM-ICU/.project deleted file mode 100644 index 9b7b1ba58..000000000 --- a/testhal/STM32L1xx/PWM-ICU/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/PWM-ICU/Makefile b/testhal/STM32L1xx/PWM-ICU/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/PWM-ICU/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/PWM-ICU/chconf.h b/testhal/STM32L1xx/PWM-ICU/chconf.h deleted file mode 100644 index 68af751f1..000000000 --- a/testhal/STM32L1xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/PWM-ICU/halconf.h b/testhal/STM32L1xx/PWM-ICU/halconf.h deleted file mode 100644 index a5adf535c..000000000 --- a/testhal/STM32L1xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/PWM-ICU/main.c b/testhal/STM32L1xx/PWM-ICU/main.c deleted file mode 100644 index 9e5955e4a..000000000 --- a/testhal/STM32L1xx/PWM-ICU/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOB, GPIOB_LED4); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOB, GPIOB_LED4); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, - 0 -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOB, GPIOB_LED3); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOB, GPIOB_LED3); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA15 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOB, GPIOB_LED3); - palClearPad(GPIOB, GPIOB_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32L1xx/PWM-ICU/mcuconf.h b/testhal/STM32L1xx/PWM-ICU/mcuconf.h deleted file mode 100644 index ee982438b..000000000 --- a/testhal/STM32L1xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 4 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/PWM-ICU/readme.txt b/testhal/STM32L1xx/PWM-ICU/readme.txt deleted file mode 100644 index 52a2dd2ad..000000000 --- a/testhal/STM32L1xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx PWM-ICU drivers. - -** Board Setup ** - -- Remove the LCD module. -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/SPI/.cproject b/testhal/STM32L1xx/SPI/.cproject deleted file mode 100644 index b2bc5eb2d..000000000 --- a/testhal/STM32L1xx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/SPI/.project b/testhal/STM32L1xx/SPI/.project deleted file mode 100644 index 5e89c246f..000000000 --- a/testhal/STM32L1xx/SPI/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/SPI/Makefile b/testhal/STM32L1xx/SPI/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/SPI/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/SPI/chconf.h b/testhal/STM32L1xx/SPI/chconf.h deleted file mode 100644 index 68af751f1..000000000 --- a/testhal/STM32L1xx/SPI/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/SPI/halconf.h b/testhal/STM32L1xx/SPI/halconf.h deleted file mode 100644 index 6549d25d6..000000000 --- a/testhal/STM32L1xx/SPI/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/SPI/main.c b/testhal/STM32L1xx/SPI/main.c deleted file mode 100644 index 4931106fd..000000000 --- a/testhal/STM32L1xx/SPI/main.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (16MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -/* - * Low speed SPI configuration (256kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static THD_WORKING_AREA(spi_thread_1_wa, 256); -static THD_FUNCTION(spi_thread_1, p) { - - (void)p; - - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOB, GPIOB_LED4); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static THD_WORKING_AREA(spi_thread_2_wa, 256); -static THD_FUNCTION(spi_thread_2, p) { - - (void)p; - - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOB, GPIOB_LED4); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI1 I/O pins setup. - */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* NSS. */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5)); /* MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* MOSI. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32L1xx/SPI/mcuconf.h b/testhal/STM32L1xx/SPI/mcuconf.h deleted file mode 100644 index f91b311e4..000000000 --- a/testhal/STM32L1xx/SPI/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/SPI/readme.txt b/testhal/STM32L1xx/SPI/readme.txt deleted file mode 100644 index 2ce870851..000000000 --- a/testhal/STM32L1xx/SPI/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx SPI driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/UART/.cproject b/testhal/STM32L1xx/UART/.cproject deleted file mode 100644 index dc7b9ec94..000000000 --- a/testhal/STM32L1xx/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/UART/.project b/testhal/STM32L1xx/UART/.project deleted file mode 100644 index ef391b72f..000000000 --- a/testhal/STM32L1xx/UART/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32L1xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/UART/Makefile b/testhal/STM32L1xx/UART/Makefile deleted file mode 100644 index ad1bb67f8..000000000 --- a/testhal/STM32L1xx/UART/Makefile +++ /dev/null @@ -1,198 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32l1xx.mk -#include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(OSALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32L1xx/UART/chconf.h b/testhal/STM32L1xx/UART/chconf.h deleted file mode 100644 index 68af751f1..000000000 --- a/testhal/STM32L1xx/UART/chconf.h +++ /dev/null @@ -1,498 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/UART/halconf.h b/testhal/STM32L1xx/UART/halconf.h deleted file mode 100644 index 243190f6d..000000000 --- a/testhal/STM32L1xx/UART/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/UART/main.c b/testhal/STM32L1xx/UART/main.c deleted file mode 100644 index f8b19014c..000000000 --- a/testhal/STM32L1xx/UART/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromISR(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromISR(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32L1xx/UART/mcuconf.h b/testhal/STM32L1xx/UART/mcuconf.h deleted file mode 100644 index 77c9df342..000000000 --- a/testhal/STM32L1xx/UART/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/UART/readme.txt b/testhal/STM32L1xx/UART/readme.txt deleted file mode 100644 index 5f3edb851..000000000 --- a/testhal/STM32L1xx/UART/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx UART driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com -- cgit v1.2.3