From 1c6848025af910e76317d228e8b66f19c6bbd1f7 Mon Sep 17 00:00:00 2001
From: edolomb <none@example.com>
Date: Thu, 17 Jan 2019 15:20:57 +0000
Subject: Deleted sama demos

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12544 110e8d01-0319-4d1e-a829-52ad28d1bb01
---
 .../RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c   | 85 ----------------------
 1 file changed, 85 deletions(-)
 delete mode 100644 demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c

(limited to 'demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c')

diff --git a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c b/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c
deleted file mode 100644
index 48525faea..000000000
--- a/demos/ATSAMA5D2/RT-SAMA5D2-XPLAINED-WOLFSSL-HALCRYPTO/main.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-
-BaseSequentialStream *serialp;
-
-extern void wolfCrypt_Init(void);
-extern void wolfcrypt_test(void);
-/*
- * Green LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (TRUE) {
-    palClearLine(LINE_LED_BLUE);
-    chThdSleepMilliseconds(500);
-    palSetLine(LINE_LED_BLUE);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-static const SerialConfig sdcfg = { 115200, 0,UART_MR_PAR_NO };
-static const CRYConfig cryptoconf = {
-    TRANSFER_POLLING,
-    AES_CFBS_128,       //cfbs
-};
-/*
- * Application entry point.
- */
-int main(void) {
-
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  sdStart(&SD1, &sdcfg);
-
-  serialp =(BaseSequentialStream *)&SD1;
-
-  	/* Redirecting  UART0 RX on PD2 and UART0 TX on PD3. */
-  	palSetGroupMode(PIOD, PAL_PORT_BIT(2) | PAL_PORT_BIT(3), 0U,
-  			PAL_SAMA_FUNC_PERIPH_A | PAL_MODE_SECURE);
-
-  	cryStart(&CRYD1, &cryptoconf);
-  /*
-   * Creates the blinker thread.
-   */
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
-  wolfCrypt_Init();
-  wolfcrypt_test();
-  /*
-   * Normal main() thread activity, in this demo it does nothing except
-   * sleeping in a loop and check the button state.
-   */
-  while (true) {
-    chThdSleepMilliseconds(500);
-  }
-}
-- 
cgit v1.2.3