From 06f9534388d942b2e94ae8b7deda6f60e2914fb1 Mon Sep 17 00:00:00 2001 From: Rob Lippert Date: Sun, 15 May 2016 12:15:09 +0000 Subject: Adds support for USB device functionality for AT90USB and ATU2/U4 series devices. Support tested on a PJRC TEENSY2++ board with AT90USB1286. Signed-off-by: Rob Lippert git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9487 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/AVR/RT-TEENSY2-USB/mcuconf.h | 90 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 90 insertions(+) create mode 100644 demos/AVR/RT-TEENSY2-USB/mcuconf.h (limited to 'demos/AVR/RT-TEENSY2-USB/mcuconf.h') diff --git a/demos/AVR/RT-TEENSY2-USB/mcuconf.h b/demos/AVR/RT-TEENSY2-USB/mcuconf.h new file mode 100644 index 000000000..c5a784bd1 --- /dev/null +++ b/demos/AVR/RT-TEENSY2-USB/mcuconf.h @@ -0,0 +1,90 @@ +/* + Copyright (C) 2015 Robert Lippert + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H_ +#define MCUCONF_H_ + +/* + * AVR drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the driver + * is enabled in halconf.h. + */ + +/* + * ADC driver system settings. + */ +#define AVR_ADC_USE_ADC1 FALSE + +/* + * CAN driver system settings. + */ + +/* + * MAC driver system settings. + */ + +/* + * PWM driver system settings. + */ +#define AVR_PWM_USE_TIM1 FALSE +#define AVR_PWM_USE_TIM2 FALSE +#define AVR_PWM_USE_TIM3 FALSE +#define AVR_PWM_USE_TIM4 FALSE +#define AVR_PWM_USE_TIM5 FALSE + +/* + * ICU driver system settings. + */ +#define AVR_ICU_USE_TIM1 FALSE +#define AVR_ICU_USE_TIM3 FALSE +#define AVR_ICU_USE_TIM4 FALSE +#define AVR_ICU_USE_TIM5 FALSE + +/* + * GPT driver system settings. + */ +#define AVR_GPT_USE_TIM1 FALSE +#define AVR_GPT_USE_TIM2 FALSE +#define AVR_GPT_USE_TIM3 FALSE +#define AVR_GPT_USE_TIM4 FALSE +#define AVR_GPT_USE_TIM5 FALSE + +/* + * SERIAL driver system settings. + */ +#define AVR_SERIAL_USE_USART0 FALSE +#define AVR_SERIAL_USE_USART1 TRUE + +/* + * I2C driver system settings. + */ +#define AVR_I2C_USE_I2C1 FALSE + +/* + * SPI driver system settings. + */ +#define AVR_SPI_USE_SPI1 FALSE +#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE FALSE + +/* + * USB driver system settings. + */ +#define AVR_USB_USE_USB1 TRUE +#define AVR_USB_USE_NAMED_ADDRESS_SPACES FALSE + +#endif /* MCUCONF_H_ */ -- cgit v1.2.3