From db61d719ed076c0d00d187b2b5fdd32b00411aa7 Mon Sep 17 00:00:00 2001
From: Rocco Marco Guglielmi <roccomarco.guglielmi@live.com>
Date: Sat, 30 Apr 2016 15:36:55 +0000
Subject: Fixed wrong comment in RT-STM32F207ZG-NUCLEO144/main.c Added bunch of
 demos related to STM32F2xx

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9391 35acf78f-673a-0410-8e92-d51de3d6d3f4
---
 testhal/STM32/STM32F2xx/PWM-ICU/main.c | 141 +++++++++++++++++++++++++++++++++
 1 file changed, 141 insertions(+)
 create mode 100644 testhal/STM32/STM32F2xx/PWM-ICU/main.c

(limited to 'testhal/STM32/STM32F2xx/PWM-ICU/main.c')

diff --git a/testhal/STM32/STM32F2xx/PWM-ICU/main.c b/testhal/STM32/STM32F2xx/PWM-ICU/main.c
new file mode 100644
index 000000000..77ff29caa
--- /dev/null
+++ b/testhal/STM32/STM32F2xx/PWM-ICU/main.c
@@ -0,0 +1,141 @@
+/*
+    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+static void pwmpcb(PWMDriver *pwmp) {
+
+  (void)pwmp;
+  palClearPad(GPIOB, GPIOB_LED1);
+}
+
+static void pwmc1cb(PWMDriver *pwmp) {
+
+  (void)pwmp;
+  palSetPad(GPIOB, GPIOB_LED1);
+}
+
+static PWMConfig pwmcfg = {
+  10000,                                    /* 10kHz PWM clock frequency.   */
+  10000,                                    /* Initial PWM period 1S.       */
+  pwmpcb,
+  {
+   {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb},
+   {PWM_OUTPUT_DISABLED, NULL},
+   {PWM_OUTPUT_DISABLED, NULL},
+   {PWM_OUTPUT_DISABLED, NULL}
+  },
+  0,
+  0
+};
+
+icucnt_t last_width, last_period;
+
+static void icuwidthcb(ICUDriver *icup) {
+
+  palSetPad(GPIOB, GPIOB_LED2);
+  last_width = icuGetWidthX(icup);
+}
+
+static void icuperiodcb(ICUDriver *icup) {
+
+  palClearPad(GPIOB, GPIOB_LED2);
+  last_period = icuGetPeriodX(icup);
+}
+
+static ICUConfig icucfg = {
+  ICU_INPUT_ACTIVE_HIGH,
+  10000,                                    /* 10kHz ICU clock frequency.   */
+  icuwidthcb,
+  icuperiodcb,
+  NULL,
+  ICU_CHANNEL_1,
+  0
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Initializes the PWM driver 1 and ICU driver 2.
+   * GPIOE9 is the PWM output.
+   * GPIOA0 is the ICU input.
+   * The two pins have to be externally connected together.
+   */
+  pwmStart(&PWMD1, &pwmcfg);
+  pwmEnablePeriodicNotification(&PWMD1);
+  icuStart(&ICUD2, &icucfg);
+  icuStartCapture(&ICUD2);
+  icuEnableNotifications(&ICUD2);
+  chThdSleepMilliseconds(2000);
+
+  /*
+   * Starts the PWM channel 0 using 75% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500));
+  pwmEnableChannelNotification(&PWMD1, 0);
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes the PWM channel 0 to 50% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes the PWM channel 0 to 25% duty cycle.
+   */
+  pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500));
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Changes PWM period to half second the duty cycle becomes 50%
+   * implicitly.
+   */
+  pwmChangePeriod(&PWMD1, 5000);
+  chThdSleepMilliseconds(5000);
+
+  /*
+   * Disables channel 0 and stops the drivers.
+   */
+  pwmDisableChannel(&PWMD1, 0);
+  pwmStop(&PWMD1);
+  icuStopCapture(&ICUD2);
+  icuStop(&ICUD2);
+  palClearPad(GPIOB, GPIOB_LED1);
+  palClearPad(GPIOB, GPIOB_LED2);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing.
+   */
+  while (true) {
+    chThdSleepMilliseconds(500);
+  }
+  return 0;
+}
-- 
cgit v1.2.3