From 78073b2ee3d46e5070f2e00c38ae681c87365a5f Mon Sep 17 00:00:00 2001
From: Giovanni Di Sirio <gdisirio@gmail.com>
Date: Sun, 19 Nov 2017 07:19:58 +0000
Subject: Removed duplicated HAL test applications now present in multi-targets
 demos.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11031 35acf78f-673a-0410-8e92-d51de3d6d3f4
---
 testhal/STM32/STM32F3xx/SPI/main.c | 160 -------------------------------------
 1 file changed, 160 deletions(-)
 delete mode 100644 testhal/STM32/STM32F3xx/SPI/main.c

(limited to 'testhal/STM32/STM32F3xx/SPI/main.c')

diff --git a/testhal/STM32/STM32F3xx/SPI/main.c b/testhal/STM32/STM32F3xx/SPI/main.c
deleted file mode 100644
index 195aec4b2..000000000
--- a/testhal/STM32/STM32F3xx/SPI/main.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).
- */
-static const SPIConfig hs_spicfg = {
-  NULL,
-  GPIOB,
-  12,
-  0,
-  SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0
-};
-
-/*
- * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first).
- */
-static const SPIConfig ls_spicfg = {
-  NULL,
-  GPIOB,
-  12,
-  SPI_CR1_BR_2 | SPI_CR1_BR_1,
-  SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0
-};
-
-/*
- * SPI TX and RX buffers.
- */
-static uint8_t txbuf[512];
-static uint8_t rxbuf[512];
-
-/*
- * SPI bus contender 1.
- */
-static THD_WORKING_AREA(spi_thread_1_wa, 256);
-static THD_FUNCTION(spi_thread_1, p) {
-
-  (void)p;
-  chRegSetThreadName("SPI thread 1");
-  while (true) {
-    spiAcquireBus(&SPID2);              /* Acquire ownership of the bus.    */
-    palSetPad(GPIOE, GPIOE_LED10_RED);  /* LED ON.                          */
-    spiStart(&SPID2, &hs_spicfg);       /* Setup transfer parameters.       */
-    spiSelect(&SPID2);                  /* Slave Select assertion.          */
-    spiExchange(&SPID2, 512,
-                txbuf, rxbuf);          /* Atomic transfer operations.      */
-    spiUnselect(&SPID2);                /* Slave Select de-assertion.       */
-    spiReleaseBus(&SPID2);              /* Ownership release.               */
-  }
-}
-
-/*
- * SPI bus contender 2.
- */
-static THD_WORKING_AREA(spi_thread_2_wa, 256);
-static THD_FUNCTION(spi_thread_2, p) {
-
-  (void)p;
-  chRegSetThreadName("SPI thread 2");
-  while (true) {
-    spiAcquireBus(&SPID2);              /* Acquire ownership of the bus.    */
-    palClearPad(GPIOE, GPIOE_LED10_RED);/* LED OFF.                         */
-    spiStart(&SPID2, &ls_spicfg);       /* Setup transfer parameters.       */
-    spiSelect(&SPID2);                  /* Slave Select assertion.          */
-    spiExchange(&SPID2, 512,
-                txbuf, rxbuf);          /* Atomic transfer operations.      */
-    spiUnselect(&SPID2);                /* Slave Select de-assertion.       */
-    spiReleaseBus(&SPID2);              /* Ownership release.               */
-  }
-}
-/*
- * This is a periodic thread that does absolutely nothing except flashing
- * a LED.
- */
-static THD_WORKING_AREA(blinker_wa, 128);
-static THD_FUNCTION(blinker, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (true) {
-    palSetPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(500);
-    palClearPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-  unsigned i;
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * SPI2 I/O pins setup.
-   */
-  palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New SCK.     */
-  palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New MISO.    */
-  palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New MOSI.    */
-  palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL |
-                           PAL_STM32_OSPEED_HIGHEST);       /* New CS.      */
-  palSetPad(GPIOB, 12);
-
-  /*
-   * Prepare transmit pattern.
-   */
-  for (i = 0; i < sizeof(txbuf); i++)
-    txbuf[i] = (uint8_t)i;
-
-  /*
-   * Starting the transmitter and receiver threads.
-   */
-  chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa),
-                    NORMALPRIO + 1, spi_thread_1, NULL);
-  chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa),
-                    NORMALPRIO + 1, spi_thread_2, NULL);
-
-  /*
-   * Starting the blinker thread.
-   */
-  chThdCreateStatic(blinker_wa, sizeof(blinker_wa),
-                    NORMALPRIO-1, blinker, NULL);
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing.
-   */
-  while (true) {
-    chThdSleepMilliseconds(500);
-  }
-  return 0;
-}
-- 
cgit v1.2.3