From 78073b2ee3d46e5070f2e00c38ae681c87365a5f Mon Sep 17 00:00:00 2001
From: Giovanni Di Sirio <gdisirio@gmail.com>
Date: Sun, 19 Nov 2017 07:19:58 +0000
Subject: Removed duplicated HAL test applications now present in multi-targets
 demos.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11031 35acf78f-673a-0410-8e92-d51de3d6d3f4
---
 testhal/STM32/STM32F4xx/UART/main.c | 160 ------------------------------------
 1 file changed, 160 deletions(-)
 delete mode 100644 testhal/STM32/STM32F4xx/UART/main.c

(limited to 'testhal/STM32/STM32F4xx/UART/main.c')

diff --git a/testhal/STM32/STM32F4xx/UART/main.c b/testhal/STM32/STM32F4xx/UART/main.c
deleted file mode 100644
index 7ef53abeb..000000000
--- a/testhal/STM32/STM32F4xx/UART/main.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static virtual_timer_t vt3, vt4, vt5;
-
-static const uint8_t message[] = "0123456789ABCDEF";
-static uint8_t buffer[16];
-
-static void led3off(void *p) {
-
-  (void)p;
-  palClearPad(GPIOD, GPIOD_LED3);
-}
-
-static void led4off(void *p) {
-
-  (void)p;
-  palClearPad(GPIOD, GPIOD_LED4);
-}
-
-static void led5off(void *p) {
-
-  (void)p;
-  palClearPad(GPIOD, GPIOD_LED5);
-}
-
-/*
- * This callback is invoked when a transmission buffer has been completely
- * read by the driver.
- */
-static void txend1(UARTDriver *uartp) {
-
-  (void)uartp;
-}
-
-/*
- * This callback is invoked when a transmission has physically completed.
- */
-static void txend2(UARTDriver *uartp) {
-
-  (void)uartp;
-  palSetPad(GPIOD, GPIOD_LED5);
-  chSysLockFromISR();
-  chVTResetI(&vt5);
-  chVTSetI(&vt5, TIME_MS2I(200), led5off, NULL);
-  chSysUnlockFromISR();
-}
-
-/*
- * This callback is invoked on a receive error, the errors mask is passed
- * as parameter.
- */
-static void rxerr(UARTDriver *uartp, uartflags_t e) {
-
-  (void)uartp;
-  (void)e;
-}
-
-/*
- * This callback is invoked when a character is received but the application
- * was not ready to receive it, the character is passed as parameter.
- */
-static void rxchar(UARTDriver *uartp, uint16_t c) {
-
-  (void)uartp;
-  (void)c;
-  /* Flashing the LED each time a character is received.*/
-  palSetPad(GPIOD, GPIOD_LED4);
-  chSysLockFromISR();
-  chVTResetI(&vt4);
-  chVTSetI(&vt4, TIME_MS2I(200), led4off, NULL);
-  chSysUnlockFromISR();
-}
-
-/*
- * This callback is invoked when a receive buffer has been completely written.
- */
-static void rxend(UARTDriver *uartp) {
-
-  (void)uartp;
-
-  /* Flashing the LED each time a character is received.*/
-  palSetPad(GPIOD, GPIOD_LED3);
-  chSysLockFromISR();
-  chVTResetI(&vt3);
-  chVTSetI(&vt3, TIME_MS2I(200), led3off, NULL);
-  chSysUnlockFromISR();
-}
-
-/*
- * UART driver configuration structure.
- */
-static UARTConfig uart_cfg_1 = {
-  txend1,
-  txend2,
-  rxend,
-  rxchar,
-  rxerr,
-  38400,
-  0,
-  USART_CR2_LINEN,
-  0
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the UART driver 2, PA2(TX) and PA3(RX) are routed to USART2.
-   */
-  uartStart(&UARTD2, &uart_cfg_1);
-  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
-  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
-
-
-  /*
-   * Normal main() thread activity, in this demo it does nothing.
-   */
-  while (true) {
-    if (palReadPad(GPIOA, GPIOA_BUTTON)) {
-      /*
-       * Starts both a transmission and a receive operations, both will be
-       * handled entirely in background.
-       */
-      uartStopReceive(&UARTD2);
-      uartStopSend(&UARTD2);
-      uartStartReceive(&UARTD2, 16, buffer);
-      uartStartSend(&UARTD2, 16, message);
-    }
-    chThdSleepMilliseconds(500);
-  }
-}
-- 
cgit v1.2.3