From d27c34d080bd4a72169921e2f458546dc621b4e7 Mon Sep 17 00:00:00 2001
From: Giovanni Di Sirio <gdisirio@gmail.com>
Date: Sat, 6 Oct 2018 05:04:05 +0000
Subject: Removed QSPI driver and demos.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12331 110e8d01-0319-4d1e-a829-52ad28d1bb01
---
 testhal/STM32/multi/QSPI-MFS/main.c | 104 ------------------------------------
 1 file changed, 104 deletions(-)
 delete mode 100644 testhal/STM32/multi/QSPI-MFS/main.c

(limited to 'testhal/STM32/multi/QSPI-MFS/main.c')

diff --git a/testhal/STM32/multi/QSPI-MFS/main.c b/testhal/STM32/multi/QSPI-MFS/main.c
deleted file mode 100644
index e553f9719..000000000
--- a/testhal/STM32/multi/QSPI-MFS/main.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include <string.h>
-
-#include "ch.h"
-#include "hal.h"
-
-#include "m25q.h"
-#include "mfs.h"
-
-#include "mfs_test_root.h"
-
-#include "portab.h"
-
-/* 16MB device, 2 cycles delay after NCS.*/
-const QSPIConfig qspicfg1 = {
-  .end_cb           = NULL,
-  .dcr              = STM32_DCR_FSIZE(24) | STM32_DCR_CSHT(1)
-};
-
-const M25QConfig m25qcfg1 = {
-  .busp             = &QSPID1,
-  .buscfg           = &qspicfg1
-};
-
-M25QDriver m25q;
-
-const MFSConfig mfscfg1 = {
-  .flashp           = (BaseFlash *)&m25q,
-  .erased           = 0xFFFFFFFFU,
-  .bank_size        = 4096U,
-  .bank0_start      = 0U,
-  .bank0_sectors    = 1U,
-  .bank1_start      = 1U,
-  .bank1_sectors    = 1U
-};
-
-/*
- * LED blinker thread, times are in milliseconds.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-  chRegSetThreadName("blinker");
-  while (true) {
-    palToggleLine(PORTAB_LINE_LED1);
-    chThdSleepMilliseconds(500);
-    palToggleLine(PORTAB_LINE_LED1);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*Board-dependent GPIO setup code.*/
-  portab_setup();
-
-  /* Starting a serial port for test report output.*/
-  sdStart(&PORTAB_SD1, NULL);
-
-  /* Initializing and starting M25Q driver.*/
-  m25qObjectInit(&m25q);
-  m25qStart(&m25q, &m25qcfg1);
-
-  /* Creates the blinker thread.*/
-  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
-
-  /* Normal main() thread activity, in this demo it does nothing.*/
-  while (true) {
-    if (palReadLine(PORTAB_LINE_BUTTON) == PORTAB_BUTTON_PRESSED) {
-      test_execute((BaseSequentialStream *)&PORTAB_SD1, &mfs_test_suite);
-    }
-    chThdSleepMilliseconds(500);
-  }
-  return 0;
-}
-- 
cgit v1.2.3