aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/amj96/rules.mk
diff options
context:
space:
mode:
authorMechMerlin <30334081+mechmerlin@users.noreply.github.com>2018-03-30 22:57:49 -0700
committerJack Humbert <jack.humb@gmail.com>2018-03-31 01:57:49 -0400
commit015aed50a36ba9582fb24023f2ecc4f14b16dcfd (patch)
tree3335cc5c50ae5dca4944c5c7f778851a1d2055b3 /keyboards/amj96/rules.mk
parentc6b5ce61e8b3eea331e2b691cf4eb3b01dab5020 (diff)
downloadfirmware-015aed50a36ba9582fb24023f2ecc4f14b16dcfd.tar.gz
firmware-015aed50a36ba9582fb24023f2ecc4f14b16dcfd.tar.bz2
firmware-015aed50a36ba9582fb24023f2ecc4f14b16dcfd.zip
AMJ96 Support (#2651)
* Initial commit: Get things compiling * port the custom matrix code * Update readme * make second layer fully transparent * populate config.h identifiers with more correct information * Add in switch backlight support * Enable backlight LEDs, and change pin for RGB * port TMK version over * remove all that TMK stuff, it didn't work lol * Updated readme * Fix keymap - Change KEYMAP to LAYOUT - Adjust formatting of table * Edit readme to reflect NOTES * add info.json for QMK configurator support * Replaced placeholder with MechMerlin
Diffstat (limited to 'keyboards/amj96/rules.mk')
-rw-r--r--keyboards/amj96/rules.mk72
1 files changed, 72 insertions, 0 deletions
diff --git a/keyboards/amj96/rules.mk b/keyboards/amj96/rules.mk
new file mode 100644
index 000000000..3421d5820
--- /dev/null
+++ b/keyboards/amj96/rules.mk
@@ -0,0 +1,72 @@
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes # USB Nkey Rollover
+# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c