diff options
Diffstat (limited to 'docs/feature_haptic_feedback.md')
-rw-r--r-- | docs/feature_haptic_feedback.md | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index d9e445de8..ff7337a51 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -2,7 +2,7 @@ ## Haptic feedback rules.mk options -The following options are currently available for haptic feedback in `rule.mk`: +The following options are currently available for haptic feedback in `rules.mk`: `HAPTIC_ENABLE += DRV2605L` @@ -41,11 +41,15 @@ First you will need a build a circuit to drive the solenoid through a mosfet as [Wiring diagram provided by Adafruit](https://playground.arduino.cc/uploads/Learning/solenoid_driver.pdf) -Select a pin that has PWM for the signal pin -``` -#define SOLENOID_PIN *pin* -``` +| Settings | Default | Description | +|--------------------------|---------------|-------------------------------------------------------| +|`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. | +|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. | +|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | +|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | + +?> Dwell time is how long the "plunger" stays activated. The dwell time changes how the solenoid sounds. Beware that some pins may be powered during bootloader (ie. A13 on the STM32F303 chip) and will result in the solenoid kept in the on state through the whole flashing process. This may overheat and damage the solenoid. If you find that the pin the solenoid is connected to is triggering the solenoid during bootloader/DFU, select another pin. @@ -151,4 +155,4 @@ This will set what sequence HPT_RST will set as the active mode. If not defined, ### DRV2605L Continuous Haptic Mode -This mode sets continuous haptic feedback with the option to increase or decrease strength.
\ No newline at end of file +This mode sets continuous haptic feedback with the option to increase or decrease strength. |