aboutsummaryrefslogtreecommitdiffstats
path: root/keyboard/cluepad
diff options
context:
space:
mode:
Diffstat (limited to 'keyboard/cluepad')
-rw-r--r--keyboard/cluepad/Makefile136
-rw-r--r--keyboard/cluepad/backlight.c54
-rw-r--r--keyboard/cluepad/cluepad.c39
-rw-r--r--keyboard/cluepad/cluepad.h41
-rw-r--r--keyboard/cluepad/config.h101
-rw-r--r--keyboard/cluepad/keymaps/keymap_default.c122
6 files changed, 0 insertions, 493 deletions
diff --git a/keyboard/cluepad/Makefile b/keyboard/cluepad/Makefile
deleted file mode 100644
index 9d4ddc07f..000000000
--- a/keyboard/cluepad/Makefile
+++ /dev/null
@@ -1,136 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = cluepad
-
-
-# Directory common source filess exist
-TOP_DIR = ../..
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# # project specific files
-SRC = cluepad.c backlight.c
-
-ifdef KEYMAP
- SRC := keymaps/keymap_$(KEYMAP).c $(SRC)
-else
- SRC := keymaps/keymap_default.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
-# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-# EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-# CONSOLE_ENABLE = yes # Console for debug(+400)
-# COMMAND_ENABLE = yes # Commands for debug and configuration
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = yes # Enable numpad's backlight functionality
-RGBLIGHT_ENABLE = yes
-# MIDI_ENABLE = YES # MIDI controls
-# UNICODE_ENABLE = YES # Unicode
-# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
-
-# Optimize size but this may cause error "relocation truncated to fit"
-#EXTRALDFLAGS = -Wl,--relax
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-VPATH += $(TMK_DIR)
-
-include $(TOP_DIR)/quantum/quantum.mk
diff --git a/keyboard/cluepad/backlight.c b/keyboard/cluepad/backlight.c
deleted file mode 100644
index a9caed1df..000000000
--- a/keyboard/cluepad/backlight.c
+++ /dev/null
@@ -1,54 +0,0 @@
-#include <avr/io.h>
-#include "backlight.h"
-#include "led.h"
-
-#include "print.h"
-
-int pwm_level;
-
-void led_set_kb(uint8_t usb_led)
-{
- print("led_set\n");
-}
-
-void init_backlight_pin(void)
-{
- // Set C7 to output
- DDRC |= (1<<7);
-
- // Initialize the timer
- TC4H = 0x03;
- OCR4C = 0xFF;
- TCCR4A = 0b10000010;
- TCCR4B = 0b00000001;
-}
-
-void backlight_set(uint8_t level)
-{
- // Determine the PWM level
- switch (level)
- {
- case 0:
- // 33%
- pwm_level = 0x54;
- break;
- case 1:
- // 66%
- pwm_level = 0xA8;
- break;
- case 2:
- // 100%
- pwm_level = 0xFF;
- break;
- case 3:
- // 0%
- pwm_level = 0x00;
- break;
- default:
- xprintf("Unknown level: %d\n", level);
- }
-
- // Write the PWM level to the timer
- TC4H = pwm_level >> 8;
- OCR4A = 0xFF & pwm_level;
-}
diff --git a/keyboard/cluepad/cluepad.c b/keyboard/cluepad/cluepad.c
deleted file mode 100644
index d55b99960..000000000
--- a/keyboard/cluepad/cluepad.c
+++ /dev/null
@@ -1,39 +0,0 @@
-#include "cluepad.h"
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
- // leave these blank
-};
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
- // leave these blank
-};
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- if (matrix_init_user) {
- (*matrix_init_user)();
- }
-
- #ifdef BACKLIGHT_ENABLE
- init_backlight_pin();
- #endif
-
- #ifdef RGBLIGHT_ENABLE
- rgblight_init();
- #endif
-
- // JTAG disable for PORT F. write JTD bit twice within four cycles.
- MCUCR |= (1<<JTD);
- MCUCR |= (1<<JTD);
-};
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- if (matrix_scan_user) {
- (*matrix_scan_user)();
- }
-};
diff --git a/keyboard/cluepad/cluepad.h b/keyboard/cluepad/cluepad.h
deleted file mode 100644
index 36bf591e4..000000000
--- a/keyboard/cluepad/cluepad.h
+++ /dev/null
@@ -1,41 +0,0 @@
-#ifndef CLUEPAD_H
-#define CLUEPAD_H
-
-#include "matrix.h"
-#include "keymap_common.h"
-#include <stddef.h>
-
-
-/* Cluepad matrix layout
- * .-------------------.
- * |NLCK| /| *| -|
- * |-------------------|
- * | 7| 8| 9| |
- * |--------------| |
- * | 4| 5| 6| +|
- * |-------------------|
- * | 1| 2| 3| |
- * |--------------| |
- * | 0| .| Ent|
- * '-------------------'
- */
-// The first section contains all of the arguments
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
- k00, k01, k02, k03, \
- k10, k11, k12, k13, \
- k20, k21, k22, \
- k30, k31, k32, k33, \
- k40, k42 \
-) { \
- { k00, k01, k02, k03, }, \
- { k10, k11, k12, k13, }, \
- { k20, k21, k22, KC_NO, }, \
- { k30, k31, k32, k33, }, \
- { k40, KC_NO, k42, KC_NO } \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif
diff --git a/keyboard/cluepad/config.h b/keyboard/cluepad/config.h
deleted file mode 100644
index 0955e0f70..000000000
--- a/keyboard/cluepad/config.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xC1ED
-#define PRODUCT_ID 0x2312
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Clueboard
-#define PRODUCT Cluepad with RGB Underlighting
-#define DESCRIPTION QMK keyboard firmware for Cluepad
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-// ROWS: Top to bottom, COLS: Left to right
-/* Row pin configuration
-* row: 0 1 2 3 4
-* pin:
-*/
-#define MATRIX_ROW_PINS { B0, D3, D5, D4, D6 }
-/* Column pin configuration
- * col: 0 1 2 3
- * pin: F4 E6 B1 D2
- */
-#define MATRIX_COL_PINS { F4, E6, B1, D2 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Number of backlighting levels */
-#define BACKLIGHT_LEVELS 3
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Underlight configuration
- */
- #define ws2812_PORTREG PORTF
- #define ws2812_DDRREG DDRF
- #define ws2812_pin 6
- #define RGBLED_NUM 4 // Number of LEDs
- #define RGBLIGHT_HUE_STEP 10
- #define RGBLIGHT_SAT_STEP 17
- #define RGBLIGHT_VAL_STEP 17
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* Debug forcibly enabled */
-#define ALWAYS_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-#endif
diff --git a/keyboard/cluepad/keymaps/keymap_default.c b/keyboard/cluepad/keymaps/keymap_default.c
deleted file mode 100644
index 8ba49952f..000000000
--- a/keyboard/cluepad/keymaps/keymap_default.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include "cluepad.h"
-
-#include "backlight.h"
-#include "rgblight.h"
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
-#define _RS 2
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- * .-------------------.
- * |NL F| /| *| -|
- * |-------------------|
- * | 7| 8| 9| |
- * |--------------| |
- * | 4| 5| 6| +|
- * |-------------------|
- * | 1| 2| 3| |
- * |--------------| |
- * | 0| .| Ent|
- * '-------------------'
- */
-[_BL] = KEYMAP(
- LT(_FL, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, \
- KC_P7, KC_P8, KC_P9, KC_PPLS, \
- KC_P4, KC_P5, KC_P6, \
- KC_P1, KC_P2, KC_P3, KC_PENT, \
- KC_P0, KC_PDOT),
-
- /* Keymap _FL: Function Layer
- * .-------------------.
- * |NL F| | | Fn0|
- * |-------------------|
- * | | Fn4| | |
- * |--------------| |
- * | Fn3|BL_S| Fn2| Fn6|
- * |-------------------|
- * | | Fn5| | |
- * |--------------| |
- * | Fn1| | Fn7|
- * '-------------------'
- */
-[_FL] = KEYMAP(
- LT(_FL, KC_NLCK), KC_TRNS, KC_TRNS, F(0), \
- KC_TRNS, F(4), KC_TRNS, F(6), \
- F(3), BL_STEP, F(2), \
- KC_TRNS, F(5), KC_TRNS, F(7), \
- F(1), KC_TRNS)
-};
-
-enum function_id {
- RGBLED_TOGGLE,
- RGBLED_STEP_MODE,
- RGBLED_INCREASE_HUE,
- RGBLED_DECREASE_HUE,
- RGBLED_INCREASE_SAT,
- RGBLED_DECREASE_SAT,
- RGBLED_INCREASE_VAL,
- RGBLED_DECREASE_VAL,
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(RGBLED_TOGGLE),
- [1] = ACTION_FUNCTION(RGBLED_STEP_MODE),
- [2] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
- [3] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
- [4] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
- [5] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
- [6] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
- [7] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id) {
- case RGBLED_TOGGLE:
- if (record->event.pressed) {
- rgblight_toggle();
- }
- break;
- case RGBLED_INCREASE_HUE:
- if (record->event.pressed) {
- rgblight_increase_hue();
- }
- break;
- case RGBLED_DECREASE_HUE:
- if (record->event.pressed) {
- rgblight_decrease_hue();
- }
- break;
- case RGBLED_INCREASE_SAT:
- if (record->event.pressed) {
- rgblight_increase_sat();
- }
- break;
- case RGBLED_DECREASE_SAT:
- if (record->event.pressed) {
- rgblight_decrease_sat();
- }
- break;
- case RGBLED_INCREASE_VAL:
- if (record->event.pressed) {
- rgblight_increase_val();
- }
- break;
- case RGBLED_DECREASE_VAL:
- if (record->event.pressed) {
- rgblight_decrease_val();
- }
- break;
- case RGBLED_STEP_MODE:
- if (record->event.pressed) {
- rgblight_step();
- }
- break;
- }
-}
-
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-10 08:04:30 +0000