aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/lets_split
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/lets_split')
-rw-r--r--keyboards/lets_split/readme.md4
-rw-r--r--keyboards/lets_split/rules.mk10
2 files changed, 14 insertions, 0 deletions
diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md
index 6e296737a..a63ce5907 100644
--- a/keyboards/lets_split/readme.md
+++ b/keyboards/lets_split/readme.md
@@ -74,6 +74,10 @@ not be very difficult to adapt it to support more if required.
Flashing
--------
+From the keymap directory run `make SUBPROJECT-KEYMAP-avrdude` for automatic serial port resolution and flashing.
+
+Example: `make rev2-serial-avrdude`
+
If you define `EE_HANDS` in your `config.h`, you will need to set the
EEPROM for the left and right halves. The EEPROM is used to store whether the
half is left handed or right handed. This makes it so that the same firmware
diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk
index 1aee5313c..0dc549130 100644
--- a/keyboards/lets_split/rules.mk
+++ b/keyboards/lets_split/rules.mk
@@ -73,3 +73,13 @@ USE_I2C ?= yes
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
+
+avrdude: build
+ ls /dev/tty* > /tmp/1; \
+ echo "Reset your Pro Micro then hit any key to continue..."; \
+ read -n 1 -s; \
+ ls /dev/tty* > /tmp/2; \
+ USB=`diff /tmp/1 /tmp/2 | grep '>' | sed -e 's/> //'`; \
+ avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+
+.PHONY: avrdude