diff options
Diffstat (limited to 'keyboards/maartenwut')
38 files changed, 1285 insertions, 264 deletions
diff --git a/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c b/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c new file mode 100644 index 000000000..ebd52ffd0 --- /dev/null +++ b/keyboards/maartenwut/atom47/keymaps/junonum_a47/keymap.c @@ -0,0 +1,150 @@ +#include QMK_KEYBOARD_H + +/* enum custom_keycodes { + SHIFTEN = SAFE_RANGE, + LOWER, + RAISE, + SPACFNL, + SPACFNR, + MAIN, + ADJUST +}; */ + +#define _MAIN 0 +#define _SPLEFT 1 +#define _SPRIGHT 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 5 + +#define _DPAD 6 +#define _DPADNUM 7 + + +#define SHIFTEN RSFT_T(KC_ENT) +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define SPACFNL LT(_SPLEFT, KC_SPC) +#define SPACFNR LT(_SPRIGHT, KC_SPC) + +#define DP_ON TO(_DPAD) +#define DP_OFF TO(_MAIN) +#define DPADNUM MO(_DPADNUM) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Primary layer + [_MAIN] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SHIFTEN, + KC_LCTL, KC_LGUI, KC_LALT, LOWER, SPACFNL, SPACFNR, RAISE, KC_RALT, KC_APP, KC_RCTRL + ), + + // Main Fn navigation layer + [_SPLEFT] = LAYOUT( + _______, KC_VOLU, KC_PGUP, KC_UP, KC_PGDN, KC_INS, _______, _______, KC_UP, _______, KC_PSCR, _______, _______, + _______, KC_VOLD, KC_LEFT, KC_DOWN, KC_RGHT, KC_HOME, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_DEL , + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, KC_END, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + // Primary numeric layer using right Spacebar + [_SPRIGHT] = LAYOUT( + KC_GRV, _______, _______, KC_LBRC, KC_RBRC, _______, _______, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, _______, _______, KC_LCBR, KC_RCBR, _______, _______, KC_4, KC_5, KC_6, KC_MINUS, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_EQUAL, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + // Secondary symbol layer, also Lower + [_LOWER] = LAYOUT( + KC_TILD, _______, _______, _______, _______, _______, _______, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_SLCK, KC_PAUS, + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_DLR, KC_PERC, KC_CIRC, KC_UNDS, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_EXLM, KC_AT, KC_HASH, KC_PLUS, _______, + _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY + ), + + // Numpad layer // Also a homage to Planck with the media player/pause button + [_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY + ), + + // Safety layer for special functions + [_ADJUST] = LAYOUT( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, DP_ON, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_DPAD] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT, + KC_LCTL, KC_LGUI, KC_LALT, XXXXXXX, DPADNUM, KC_SPC, DP_OFF, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_DPADNUM] = LAYOUT( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, _______, + _______, _______, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, + _______, _______, _______, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { +/* case MAIN: + if (record->event.pressed) { + persistant_default_layer_set(1UL<<_MAIN); + } + return false; + break; */ + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; +/* case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; */ + } + return true; +} + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + // Turn capslock on + writePinLow(E6); + + + } else { + // Turn capslock off + writePinHigh(E6); + } +} diff --git a/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md b/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md new file mode 100644 index 000000000..42d837023 --- /dev/null +++ b/keyboards/maartenwut/atom47/keymaps/junonum_a47/readme.md @@ -0,0 +1 @@ +Juno's junonum keymap adapted for Atom47.
\ No newline at end of file diff --git a/keyboards/maartenwut/eon40/config.h b/keyboards/maartenwut/eon40/config.h new file mode 100644 index 000000000..e786255ff --- /dev/null +++ b/keyboards/maartenwut/eon40/config.h @@ -0,0 +1,254 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x0140 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT Eon40 +#define DESCRIPTION A 40% ortholinear PCB + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B7,D5,F5,F6} +#define MATRIX_COL_PINS {F0,F1,F4,D3,D4,D6,D7,B4,B5,B6,C6,C7} +#define UNUSED_PINS {B1,B2,B3} + +#define ENCODERS_PAD_A { E6, B0, D1 } +#define ENCODERS_PAD_B { F7, D0, D2 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define QMK_ESC_OUTPUT F0 // usually COL +#define QMK_ESC_INPUT B7 // usually ROW diff --git a/keyboards/maartenwut/eon40/eon40.c b/keyboards/maartenwut/eon40/eon40.c new file mode 100644 index 000000000..5a6fe4b20 --- /dev/null +++ b/keyboards/maartenwut/eon40/eon40.c @@ -0,0 +1,16 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "eon40.h" diff --git a/keyboards/maartenwut/eon40/eon40.h b/keyboards/maartenwut/eon40/eon40.h new file mode 100644 index 000000000..194e47032 --- /dev/null +++ b/keyboards/maartenwut/eon40/eon40.h @@ -0,0 +1,67 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} + +#define LAYOUT_planck_mit( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ +} + +#define LAYOUT_ortho_4x12_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, XXX, XXX, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/maartenwut/eon40/info.json b/keyboards/maartenwut/eon40/info.json new file mode 100644 index 000000000..056be65d0 --- /dev/null +++ b/keyboards/maartenwut/eon40/info.json @@ -0,0 +1,18 @@ +{ + "keyboard_name": "Eon40", + "url": "https://maartenwut.com/product/eon40/", + "maintainer": "qmk", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x12": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + "LAYOUT_planck_mit": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3, "w":2}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + }, + "LAYOUT_ortho_4x12_2x2u": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3, "w":2}, {"x":6, "y":3, "w":2}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}] + } + } +} diff --git a/keyboards/maartenwut/eon40/keymaps/default/keymap.c b/keyboards/maartenwut/eon40/keymaps/default/keymap.c new file mode 100644 index 000000000..e9b364230 --- /dev/null +++ b/keyboards/maartenwut/eon40/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //Low +#define _HI 2 //High + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_ortho_4x12( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_RALT, MO(_LO), KC_SPC, KC_BSPC, MO(_HI), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + +[_LO] = LAYOUT_ortho_4x12( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), + +[_HI] = LAYOUT_ortho_4x12( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +};
\ No newline at end of file diff --git a/keyboards/maartenwut/eon40/keymaps/default/readme.md b/keyboards/maartenwut/eon40/keymaps/default/readme.md new file mode 100644 index 000000000..7185afb0e --- /dev/null +++ b/keyboards/maartenwut/eon40/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Eon40. diff --git a/keyboards/maartenwut/eon40/readme.md b/keyboards/maartenwut/eon40/readme.md new file mode 100644 index 000000000..05dffd7af --- /dev/null +++ b/keyboards/maartenwut/eon40/readme.md @@ -0,0 +1,21 @@ +# Eon40 + +## Support +* Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) +* Hardware Supported: Eon40 +* Hardware Availability: [maartenwut.com](https://maartenwut.com) + + +## Features +- QMK Firmware +- 19mm switch spacing +- USB-C Connector +- Up to three rotary encoders +- No leds + +## Build +Make example for this keyboard (after setting up your build environment): + + make maartenwut/eon40:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/maartenwut/eon40/rules.mk b/keyboards/maartenwut/eon40/rules.mk new file mode 100644 index 000000000..5161f8d07 --- /dev/null +++ b/keyboards/maartenwut/eon40/rules.mk @@ -0,0 +1,37 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +ENCODER_ENABLE = yes + +LAYOUTS = ortho_4x12 planck_mit +LAYOUTS_HAS_RGB = no diff --git a/keyboards/maartenwut/minitomic/config.h b/keyboards/maartenwut/minitomic/config.h new file mode 100644 index 000000000..8a6eed541 --- /dev/null +++ b/keyboards/maartenwut/minitomic/config.h @@ -0,0 +1,252 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x0145 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT Minitomic +#define DESCRIPTION A 45% staggered keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B1,B3,D4,D6} +#define MATRIX_COL_PINS {C6,B6,B5,B4,D7,F0,F1,F4,F5,F6,F7,B7,E6} +#define UNUSED_PINS {B2,D0,D1,D2,D3,D5} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 + +#define QMK_ESC_OUTPUT C6 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED C7 diff --git a/keyboards/maartenwut/minitomic/info.json b/keyboards/maartenwut/minitomic/info.json new file mode 100644 index 000000000..4af72b36e --- /dev/null +++ b/keyboards/maartenwut/minitomic/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Minitomic", + "url": "", + "maintainer": "qmk", + "width": 13, + "height": 4, + "layouts": { + "LAYOUT_split_space": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3, "w":1.25}, {"x":2.5, "y":3}, {"x":3.5, "y":3}, {"x":4.5, "y":3, "w":1.75}, {"x":6.25, "y":3, "w":2}, {"x":8.25, "y":3}, {"x":9.25, "y":3, "w":1.25}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}] + }, + "LAYOUT_full_space": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2, "w":1.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3, "w":6.25}, {"x":9.5, "y":3}, {"x":10.5, "y":3, "w":1.25}, {"x":11.75, "y":3, "w":1.25}] + } + } +} diff --git a/keyboards/maartenwut/minitomic/keymaps/default/keymap.c b/keyboards/maartenwut/minitomic/keymaps/default/keymap.c new file mode 100644 index 000000000..4d9a69fec --- /dev/null +++ b/keyboards/maartenwut/minitomic/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _MA 0 //Main layer +#define _LO 1 //Low +#define _HI 2 //High + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_MA] = LAYOUT_split_space( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, MO(_LO), KC_SPC, KC_SPC, MO(_HI), KC_RALT, KC_APP, KC_RCTRL), \ + +[_LO] = LAYOUT_split_space( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), _______, _______, KC_QUOT, KC_LBRC, KC_RBRC, KC_BSLS, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET), \ + +[_HI] = LAYOUT_split_space( + _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_UP, KC_PGDN, _______, _______, _______, \ + KC_CAPS, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MPLY, KC_PSCR, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +};
\ No newline at end of file diff --git a/keyboards/maartenwut/minitomic/keymaps/default/readme.md b/keyboards/maartenwut/minitomic/keymaps/default/readme.md new file mode 100644 index 000000000..0ec508ffa --- /dev/null +++ b/keyboards/maartenwut/minitomic/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the Minitomic. diff --git a/keyboards/maartenwut/minitomic/minitomic.c b/keyboards/maartenwut/minitomic/minitomic.c new file mode 100644 index 000000000..71447b196 --- /dev/null +++ b/keyboards/maartenwut/minitomic/minitomic.c @@ -0,0 +1,50 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "minitomic.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +void led_init_ports(void) { + //Set led pin as output, then high (off) + writePinHigh(C7); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + // writePin sets the pin high for 1 and low for 0. + // In this example the pins are inverted, setting + // it low/0 turns it on, and high/1 turns the LED off. + // This behavior depends on whether the LED is between the pin + // and VCC or the pin and GND. + writePin(C7, !led_state.caps_lock); + } + return res; +} + diff --git a/keyboards/maartenwut/minitomic/minitomic.h b/keyboards/maartenwut/minitomic/minitomic.h new file mode 100644 index 000000000..ad2e8330b --- /dev/null +++ b/keyboards/maartenwut/minitomic/minitomic.h @@ -0,0 +1,53 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" +#define XXX KC_NO + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_split_space( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX }, \ + { k30, k31, k32, k33, k34, XXX, k36, k37, XXX, k39, k3a, k3b, XXX } \ +} + +#define LAYOUT_full_space( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k36, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX }, \ + { k30, k31, k32, XXX, XXX, XXX, k36, XXX, XXX, k39, k3a, k3b, XXX } \ +} diff --git a/keyboards/maartenwut/minitomic/readme.md b/keyboards/maartenwut/minitomic/readme.md new file mode 100644 index 000000000..df0a611f8 --- /dev/null +++ b/keyboards/maartenwut/minitomic/readme.md @@ -0,0 +1,23 @@ +# Minitomic + + + +## Support +* Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) +* Hardware Supported: Minitomic +* Hardware Availability: [maartenwut.com](https://maartenwut.com) + + +## Features +- QMK Firmware +- European switch spacing (19mm) +- USB-C Connector +- Capslock indicator under tab key +- Reset button under left shift key + +## Build +Make example for this keyboard (after setting up your build environment): + + make maartenwut/minitomic:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/maartenwut/minitomic/rules.mk b/keyboards/maartenwut/minitomic/rules.mk new file mode 100644 index 000000000..d483b8db7 --- /dev/null +++ b/keyboards/maartenwut/minitomic/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs
\ No newline at end of file diff --git a/keyboards/maartenwut/plain60/config.h b/keyboards/maartenwut/plain60/config.h index d17481617..af4fb6231 100644 --- a/keyboards/maartenwut/plain60/config.h +++ b/keyboards/maartenwut/plain60/config.h @@ -47,24 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define QMK_ESC_OUTPUT D2 // usually COL #define QMK_ESC_INPUT B4 // usually ROW - -//VIA -#define DYNAMIC_KEYMAP_LAYER_COUNT 4 - -// EEPROM usage - -// TODO: refactor with new user EEPROM code (coming soon) -#define EEPROM_MAGIC 0x451F -#define EEPROM_MAGIC_ADDR 34 -// Bump this every time we change what we store -// This will automatically reset the EEPROM with defaults -// and avoid loading invalid data from the EEPROM -#define EEPROM_VERSION 0x08 -#define EEPROM_VERSION_ADDR 36 - -// Dynamic keymap starts after EEPROM version -#define DYNAMIC_KEYMAP_EEPROM_ADDR 37 -// Dynamic macro starts after dynamic keymaps (37+(4*10*6*2)) = (37+480) -#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637 -#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 387 // 1024-DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR -#define DYNAMIC_KEYMAP_MACRO_COUNT 16 diff --git a/keyboards/maartenwut/plain60/keymaps/audio/config.h b/keyboards/maartenwut/plain60/keymaps/audio/config.h new file mode 100644 index 000000000..9a43b7fbe --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/audio/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define B7_AUDIO diff --git a/keyboards/maartenwut/plain60/keymaps/audio/keymap.c b/keyboards/maartenwut/plain60/keymaps/audio/keymap.c new file mode 100644 index 000000000..91ac37501 --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/audio/keymap.c @@ -0,0 +1,27 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum _layers { + _MA, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + AU_TOG, MU_TOG, MU_MOD, CK_TOGG, _______, _______, _______, _______) +}; diff --git a/keyboards/maartenwut/plain60/keymaps/audio/rules.mk b/keyboards/maartenwut/plain60/keymaps/audio/rules.mk new file mode 100644 index 000000000..600978d17 --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/audio/rules.mk @@ -0,0 +1,4 @@ +AUDIO_ENABLE = yes +RAW_ENABLE = no +DYNAMIC_KEYMAP_ENABLE = no + diff --git a/keyboards/maartenwut/plain60/keymaps/default/keymap.c b/keyboards/maartenwut/plain60/keymaps/default/keymap.c index 7e8cfff35..2e23dece0 100644 --- a/keyboards/maartenwut/plain60/keymaps/default/keymap.c +++ b/keyboards/maartenwut/plain60/keymaps/default/keymap.c @@ -4,7 +4,10 @@ // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them // entirely and just use numbers. -#define _MA 0 +enum _layer { + _MA, + _FN +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -12,6 +15,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL) + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______) }; diff --git a/keyboards/maartenwut/plain60/keymaps/RGB/config.h b/keyboards/maartenwut/plain60/keymaps/kwerdenker/config.h index 5fadcf821..5fadcf821 100644 --- a/keyboards/maartenwut/plain60/keymaps/RGB/config.h +++ b/keyboards/maartenwut/plain60/keymaps/kwerdenker/config.h diff --git a/keyboards/maartenwut/plain60/keymaps/RGB/keymap.c b/keyboards/maartenwut/plain60/keymaps/kwerdenker/keymap.c index 25370823d..25370823d 100644 --- a/keyboards/maartenwut/plain60/keymaps/RGB/keymap.c +++ b/keyboards/maartenwut/plain60/keymaps/kwerdenker/keymap.c diff --git a/keyboards/maartenwut/plain60/keymaps/RGB/rules.mk b/keyboards/maartenwut/plain60/keymaps/kwerdenker/rules.mk index 793bd869a..facc9dc7e 100644 --- a/keyboards/maartenwut/plain60/keymaps/RGB/rules.mk +++ b/keyboards/maartenwut/plain60/keymaps/kwerdenker/rules.mk @@ -16,8 +16,7 @@ # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) -RAW_ENABLE = no -DYNAMIC_KEYMAP_ENABLE = no + diff --git a/keyboards/maartenwut/plain60/keymaps/rgb/config.h b/keyboards/maartenwut/plain60/keymaps/rgb/config.h new file mode 100644 index 000000000..842693812 --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/rgb/config.h @@ -0,0 +1,8 @@ +#pragma once + +#define RGB_DI_PIN B0 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 // limit to 20 otherwise brownouts +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/maartenwut/plain60/keymaps/rgb/keymap.c b/keyboards/maartenwut/plain60/keymaps/rgb/keymap.c new file mode 100644 index 000000000..abfb5f6b1 --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/rgb/keymap.c @@ -0,0 +1,27 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum _layers { + _MA, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_MA] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, LT(_FN, KC_UP), \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(_FN, KC_APP), KC_RCTRL), + +[_FN] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/maartenwut/plain60/keymaps/rgb/rules.mk b/keyboards/maartenwut/plain60/keymaps/rgb/rules.mk new file mode 100644 index 000000000..b6cd87b7d --- /dev/null +++ b/keyboards/maartenwut/plain60/keymaps/rgb/rules.mk @@ -0,0 +1,3 @@ +RGBLIGHT_ENABLE = yes +RAW_ENABLE = no +DYNAMIC_KEYMAP_ENABLE = no diff --git a/keyboards/maartenwut/plain60/keymaps/via/rules.mk b/keyboards/maartenwut/plain60/keymaps/via/rules.mk index 2b23b188b..1e5b99807 100644 --- a/keyboards/maartenwut/plain60/keymaps/via/rules.mk +++ b/keyboards/maartenwut/plain60/keymaps/via/rules.mk @@ -1,5 +1 @@ -# rules.mk overrides to enable VIA -SRC += keyboards/wilba_tech/wt_main.c - -RAW_ENABLE = yes -DYNAMIC_KEYMAP_ENABLE = yes +VIA_ENABLE = yes diff --git a/keyboards/maartenwut/plain60/rules.mk b/keyboards/maartenwut/plain60/rules.mk index 77b5a3eb9..398b59227 100644 --- a/keyboards/maartenwut/plain60/rules.mk +++ b/keyboards/maartenwut/plain60/rules.mk @@ -14,14 +14,14 @@ BOOTLOADER = qmk-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150) +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no UNICODE_ENABLE = no # Unicode diff --git a/keyboards/maartenwut/wasdat/config.h b/keyboards/maartenwut/wasdat/config.h index b5c4d3bc2..ffd33d853 100644 --- a/keyboards/maartenwut/wasdat/config.h +++ b/keyboards/maartenwut/wasdat/config.h @@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 +#define PRODUCT_ID 0xC474 #define DEVICE_VER 0x0001 #define MANUFACTURER Maartenwut #define PRODUCT Wasdat diff --git a/keyboards/maartenwut/wasdat/matrix.c b/keyboards/maartenwut/wasdat/matrix.c index 04d221971..6dd79b533 100644 --- a/keyboards/maartenwut/wasdat/matrix.c +++ b/keyboards/maartenwut/wasdat/matrix.c @@ -17,34 +17,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include <stdint.h> #include <stdbool.h> #include "wait.h" -#include "print.h" -#include "debug.h" #include "util.h" #include "matrix.h" #include "debounce.h" #include "quantum.h" -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -#ifdef MATRIX_MASKED - extern const matrix_row_t matrix_mask[]; -#endif - #ifdef DIRECT_PINS static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; #elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) @@ -52,150 +29,58 @@ static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; //static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; #endif -/* matrix state(1:on, 0:off) */ -static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values -static matrix_row_t matrix[MATRIX_ROWS]; //debounced values - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a - // switch blocker installed and the switch is always pressed. -#ifdef MATRIX_MASKED - return matrix[row] & matrix_mask[row]; -#else - return matrix[row]; -#endif -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; -} - +// matrix code #ifdef DIRECT_PINS static void init_pins(void) { - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - pin_t pin = direct_pins[row][col]; - if (pin != NO_PIN) { - setPinInputHigh(pin); - } + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } } - } } static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t last_row_value = current_matrix[current_row]; - current_matrix[current_row] = 0; + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - pin_t pin = direct_pins[current_row][col_index]; - if (pin != NO_PIN) { - current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } } - } - return (last_row_value != current_matrix[current_row]); + return (last_row_value != current_matrix[current_row]); } #elif (DIODE_DIRECTION == COL2ROW) -static void select_row(uint8_t row) -{ +static void select_row(uint8_t row) { setPinOutput(row_pins[row]); writePinLow(row_pins[row]); } -static void unselect_row(uint8_t row) -{ - setPinInputHigh(row_pins[row]); -} +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } -static void unselect_rows(void) -{ - for(uint8_t x = 0; x < MATRIX_ROWS; x++) { +static void unselect_rows(void) { + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { setPinInputHigh(row_pins[x]); } } static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } } -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) -{ +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { // Store last value of row prior to reading matrix_row_t last_row_value = current_matrix[current_row]; @@ -207,13 +92,13 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) wait_us(30); // For each col... - for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { // Select the col pin to read (active low) uint8_t pin_state = readPin(col_pins[col_index]); // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); + current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); } // Unselect row @@ -245,8 +130,7 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) * col 14: B7 * col 15: B3 */ -static void select_col(uint8_t col) -{ +static void select_col(uint8_t col) { switch (col) { case 0: writePinLow(C7); @@ -304,8 +188,7 @@ static void select_col(uint8_t col) } } -static void unselect_col(uint8_t col) -{ +static void unselect_col(uint8_t col) { switch (col) { case 0: writePinHigh(C7); @@ -363,8 +246,7 @@ static void unselect_col(uint8_t col) } } -static void unselect_cols(void) -{ +static void unselect_cols(void) { //Native setPinOutput(D3); setPinOutput(D7); @@ -397,14 +279,13 @@ static void unselect_cols(void) } static void init_pins(void) { - unselect_cols(); - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInputHigh(row_pins[x]); - } + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } } -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) -{ +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { bool matrix_changed = false; // Select col and wait for col selecton to stabilize @@ -412,27 +293,21 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) wait_us(30); // For each row... - for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) - { - + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { // Store last value of row prior to reading matrix_row_t last_row_value = current_matrix[row_index]; // Check row pin state - if (readPin(row_pins[row_index]) == 0) - { + if (readPin(row_pins[row_index]) == 0) { // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - else - { + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); } // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) - { + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { matrix_changed = true; } } @@ -445,40 +320,25 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) #endif -void matrix_init(void) { - +void matrix_init_custom(void) { // initialize key pins init_pins(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - raw_matrix[i] = 0; - matrix[i] = 0; - } - - debounce_init(MATRIX_ROWS); - - matrix_init_quantum(); } -uint8_t matrix_scan(void) -{ - bool changed = false; +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; #if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); - } + // Set row, read cols + for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { + changed |= read_cols_on_row(current_matrix, current_row); + } #elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); - } + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } #endif - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - - matrix_scan_quantum(); - return (uint8_t)changed; + return changed; } diff --git a/keyboards/maartenwut/wasdat/readme.md b/keyboards/maartenwut/wasdat/readme.md index 1cb42cc01..65ae6231e 100644 --- a/keyboards/maartenwut/wasdat/readme.md +++ b/keyboards/maartenwut/wasdat/readme.md @@ -4,9 +4,9 @@ A drop-in replacement controller for the WASD v2 TKL and fullsize models. -Keyboard Maintainer: [Maartenwut](https://github.com/Maartenwut) -Hardware Supported: WASD v2 TKL/Fullsize ANSI & ISO with Wasdat controller -Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat/) +* Keyboard Maintainer: [Maartenwut](https://github.com/Maartenwut) +* Hardware Supported: WASD v2 TKL/Fullsize ANSI & ISO with Wasdat controller +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/wasdat/) ## Flashing @@ -16,6 +16,6 @@ The WASD has no reset button, but it does have a bank of DIP switches on the bot Make example for this keyboard (after setting up your build environment): - make wasdat:default + make maartenwut/wasdat:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/maartenwut/wasdat/rules.mk b/keyboards/maartenwut/wasdat/rules.mk index 059e84a1a..db9728623 100644 --- a/keyboards/maartenwut/wasdat/rules.mk +++ b/keyboards/maartenwut/wasdat/rules.mk @@ -14,24 +14,24 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode +MIDI_ENABLE = no # MIDI support BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +HD44780_ENABLE = no # Enable support for HD44780 based LCDs -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite SRC += matrix.c + LAYOUTS = fullsize_ansi fullsize_iso tkl_ansi tkl_iso diff --git a/keyboards/maartenwut/wasdat/wasdat.h b/keyboards/maartenwut/wasdat/wasdat.h index 508ada485..d9f1f95a2 100644 --- a/keyboards/maartenwut/wasdat/wasdat.h +++ b/keyboards/maartenwut/wasdat/wasdat.h @@ -19,7 +19,7 @@ #define XXX KC_NO -/* This a shortcut to help you visually see your layout. +/* This is a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical * layout of the board and position of the keys. diff --git a/keyboards/maartenwut/wonderland/keymaps/default/keymap.c b/keyboards/maartenwut/wonderland/keymaps/default/keymap.c index ccb022f68..da03d7615 100755 --- a/keyboards/maartenwut/wonderland/keymaps/default/keymap.c +++ b/keyboards/maartenwut/wonderland/keymaps/default/keymap.c @@ -22,3 +22,33 @@ RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX _______, KC_LALT, _______, _______, _______, KC_RALT, _______ \ ) }; + +#ifdef USE_LEDS_FOR_LAYERS +// example of how to use LEDs as layer indicators +static uint8_t top = 1; +static uint8_t middle = 0; +static uint8_t bottom = 0; + +layer_state_t layer_state_set_user(layer_state_t state) { + top = middle = bottom = 0; + switch (get_highest_layer(state)) { + case _BASE: + top = 1; + break; + case _FUNC: + middle = 1; + break; + default: // for any other layers, or the default layer + break; + } + return state; +} + +// override kb level function +bool led_update_user(led_t usb_led) { + writePin(B1, !top); + writePin(B2, !middle); + writePin(B3, !bottom); + return false; // we are using LEDs for something else override kb +} +#endif diff --git a/keyboards/maartenwut/wonderland/wonderland.c b/keyboards/maartenwut/wonderland/wonderland.c index 9f3233e0f..441544381 100755 --- a/keyboards/maartenwut/wonderland/wonderland.c +++ b/keyboards/maartenwut/wonderland/wonderland.c @@ -1,5 +1,6 @@ #include "wonderland.h" +__attribute__ ((weak)) void matrix_init_kb(void) { // put your keyboard start-up code here // runs once when the firmware starts up @@ -7,12 +8,14 @@ void matrix_init_kb(void) { led_init_ports(); }; +__attribute__ ((weak)) void matrix_scan_kb(void) { // put your looping keyboard code here // runs every cycle (a lot) matrix_scan_user(); }; +__attribute__ ((weak)) void led_init_ports(void) { // * Set our LED pins as output setPinOutput(B1); @@ -20,23 +23,12 @@ void led_init_ports(void) { setPinOutput(B3); } -void led_set_kb(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinLow(B1); - } else { - writePinHigh(B1); +bool led_update_kb(led_t led_state) { + bool runDefault = led_update_user(led_state); + if (runDefault) { + writePin(B1, !led_state.num_lock); + writePin(B2, !led_state.caps_lock); + writePin(B3, !led_state.scroll_lock); } - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B2); - } else { - writePinHigh(B2); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinLow(B3); - } else { - writePinHigh(B3); - } - led_set_user(usb_led); + return runDefault; } |