aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/xd84/dev.md
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/xd84/dev.md')
-rw-r--r--keyboards/xd84/dev.md132
1 files changed, 132 insertions, 0 deletions
diff --git a/keyboards/xd84/dev.md b/keyboards/xd84/dev.md
new file mode 100644
index 000000000..453edb366
--- /dev/null
+++ b/keyboards/xd84/dev.md
@@ -0,0 +1,132 @@
+# XD84
+
+Development docs covering the following:
+- Kimera core
+- RGB
+- Backlight
+
+## Kimera core
+![Kimera core](https://gd2.alicdn.com/imgextra/i4/159916802/TB2qsIgdrJkpuFjy1zcXXa5FFXa_!!159916802.jpg)
+
+What little available info that was available for the qmk port
+- atmega32u4 16Mhz
+ - board seems to have a 6Mhz crystal
+- 2x PCA9555 I2C IO expander
+
+Links:
+- [Schematic, BOM, Gerbers](/kairyu/kimera/blob/master/kimera_core)
+- [Original firmware](https://github.com/kairyu/tmk_keyboard_custom/tree/master/keyboard/kimera)
+
+```c
+/*
+Kimera_core_v1.0 Components
+
+ U1 (atmega32u4)
+ ,----------------.
+ TX --| TX0(PD3) RAW |--
+ RX --| RX1(PD2) GND |--
+ --| GND RESET |-- RST
+ --| GND VCC |--
+ SDA --| 2(PD1) (PF4)A3 |--
+ SCL --| 3(PD0) (PF5)A2 |--
+ (INT) --| 4(PD4) (PF6)A1 |--
+ --| 5(PC6) (PF7)A0 |--
+ --| 6(PD7) (PB1)15 |-- SCK
+ LED2 --| 7(PE6) (PB3)14 |-- MISO
+ LED1 --| 8(PB4) (PB2)16 |-- MOSI
+ LED3 --| 9(PB5) (PB6)10 |-- LED4
+ `----------------'
+
+ IC1 (PCA9555) IC2 (PCA9555)
+ ,----------. ,----------.
+ SDA --| SDA P00 |-- P1 SDA --| SDA P00 |-- P17
+ SCL --| SCL P01 |-- P2 SCL --| SCL P01 |-- P18
+ INT --| INT P02 |-- P3 INT --| INT P02 |-- P19
+ | P03 |-- P4 | P03 |-- P20
+ GND --| A0 P04 |-- P5 VCC --| A0 P04 |-- P21
+ SJ1 --| A1 P05 |-- P6 SJ1 --| A1 P05 |-- P22
+ SJ2 --| A2 P06 |-- P7 SJ2 --| A2 P06 |-- P23
+ | P07 |-- P8 | P07 |-- P24
+ | | | |
+ | P10 |-- P9 | P10 |-- P25
+ | P11 |-- P10 | P11 |-- P26
+ | P12 |-- P11 | P12 |-- P27
+ | P13 |-- P12 | P13 |-- P28
+ | P14 |-- P13 | P14 |-- P29
+ | P15 |-- P14 | P15 |-- P30
+ | P16 |-- P15 | P16 |-- P31
+ | P17 |-- P16 | P17 |-- P32
+ `----------' `----------'
+*/
+
+```
+
+### Bootloader
+Default bootloader is `atmel-dfu`.
+Reboot to bootloader via magnetic switch next to icsp header.
+Flash using regular dfu methods.
+
+### XD84 pin mappings
+Taken from [kimera-config.json](https://github.com/kairyu/tkg/blob/master/keyboard/config/kimera-config.json)
+
+ "row_mapping": [ 1, 2, 3, 4, 5, 6 ],
+ "col_mapping": [ 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31 ],
+
+# RGB
+- PIN C7
+- Number of RGB LED 7
+
+# Backlight
+ TODO - not working
+
+## Assumptions
+### Pin/Port mappings
+- All cols are on the same IC
+- All rows are on the same IC and port
+- Pins mapped sequentially
+- Each port only does row or column not a mixture of both
+ - No need to have complex port config
+ -
+
+| ROW index | Kimera Pin | PCA9555 |
+| ----------|------------|-------------------|
+| 0 | 1 | IC1 Port 0 pin 0 |
+| 1 | 2 | IC1 Port 0 pin 1 |
+| 2 | 3 | IC1 Port 0 pin 2 |
+| 3 | 4 | IC1 Port 0 pin 3 |
+| 4 | 5 | IC1 Port 0 pin 4 |
+| 5 | 6 | IC1 Port 0 pin 5 |
+
+- Safe enough to assume `row_index == pin`
+
+
+| COL index | Kimera Pin | PCA9555 |
+| ----------|------------|-------------------|
+| 0 | 17 | IC2 Port 0 pin 0 |
+| 1 | 18 | IC2 Port 0 pin 1 |
+| 2 | 19 | IC2 Port 0 pin 2 |
+| 3 | 20 | IC2 Port 0 pin 3 |
+| 4 | 21 | IC2 Port 0 pin 4 |
+| 5 | 22 | IC2 Port 0 pin 5 |
+| 6 | 23 | IC2 Port 0 pin 6 |
+| 7 | 24 | IC2 Port 0 pin 7 |
+| 8 | 25 | IC2 Port 1 pin 0 |
+| 9 | 26 | IC2 Port 1 pin 1 |
+| 10 | 27 | IC2 Port 1 pin 2 |
+| 11 | 28 | IC2 Port 1 pin 3 |
+| 12 | 29 | IC2 Port 1 pin 4 |
+| 13 | 30 | IC2 Port 1 pin 5 |
+| 14 | 31 | IC2 Port 1 pin 6 |
+
+- Safe enough to assume here col_index does not need to be converted to pin
+- Reading both ports one after the other gives us the same sequential behavior
+ - maps to the usual practice of reading matrix columns
+ - while this technically gives 16 column reads, the 16th column can never be set so is safely ignored
+
+## Notes
+[pca9555 datasheet](https://www.ti.com/lit/ds/symlink/pca9555.pdf)
+
+- Other Kimera based boards with non sequential pin mappings, pins mapped across ICs, or mixed row/col configs will need more complicated `pin -> i2c_addr,port,pin` logic as well as rather more complex pin functions.
+
+## Return to stock firmware
+Not tested but original firmware seems to be available in the [kairyu/tkg-firmware](https://github.com/kairyu/tkg-firmware/blob/master/kimera-core.hex) repo.