aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c')
-rw-r--r--lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c480
1 files changed, 480 insertions, 0 deletions
diff --git a/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
new file mode 100644
index 000000000..aa5503f3f
--- /dev/null
+++ b/lib/lufa/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -0,0 +1,480 @@
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2017.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaims all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * XPROG Protocol handler, to process V2 Protocol wrapped XPROG commands used in Atmel programmer devices.
+ */
+
+#define INCLUDE_FROM_XPROGPROTOCOL_C
+#include "XPROGProtocol.h"
+
+#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
+/** Base absolute address for the target's NVM controller for PDI programming */
+uint32_t XPROG_Param_NVMBase = 0x010001C0;
+
+/** Size in bytes of the target's EEPROM page */
+uint16_t XPROG_Param_EEPageSize = 32;
+
+/** Address of the TPI device's NVMCMD register for TPI programming */
+uint8_t XPROG_Param_NVMCMDRegAddr = 0x33;
+
+/** Address of the TPI device's NVMCSR register for TPI programming */
+uint8_t XPROG_Param_NVMCSRRegAddr = 0x32;
+
+/** Currently selected XPROG programming protocol */
+uint8_t XPROG_SelectedProtocol = XPROG_PROTOCOL_PDI;
+
+/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
+ * programming.
+ */
+void XPROGProtocol_SetMode(void)
+{
+ struct
+ {
+ uint8_t Protocol;
+ } SetMode_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL);
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
+
+ Endpoint_Write_8(CMD_XPROG_SETMODE);
+ Endpoint_Write_8((SetMode_XPROG_Params.Protocol != XPROG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
+ * removed and processed so that the underlying XPROG command can be handled.
+ */
+void XPROGProtocol_Command(void)
+{
+ uint8_t XPROGCommand = Endpoint_Read_8();
+
+ switch (XPROGCommand)
+ {
+ case XPROG_CMD_ENTER_PROGMODE:
+ XPROGProtocol_EnterXPROGMode();
+ break;
+ case XPROG_CMD_LEAVE_PROGMODE:
+ XPROGProtocol_LeaveXPROGMode();
+ break;
+ case XPROG_CMD_ERASE:
+ XPROGProtocol_Erase();
+ break;
+ case XPROG_CMD_WRITE_MEM:
+ XPROGProtocol_WriteMemory();
+ break;
+ case XPROG_CMD_READ_MEM:
+ XPROGProtocol_ReadMemory();
+ break;
+ case XPROG_CMD_CRC:
+ XPROGProtocol_ReadCRC();
+ break;
+ case XPROG_CMD_SET_PARAM:
+ XPROGProtocol_SetParam();
+ break;
+ }
+}
+
+/** Handler for the XPROG ENTER_PROGMODE command to establish a connection with the attached device. */
+static void XPROGProtocol_EnterXPROGMode(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ bool NVMBusEnabled = false;
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ NVMBusEnabled = XMEGANVM_EnablePDI();
+ else if (XPROG_SelectedProtocol == XPROG_PROTOCOL_TPI)
+ NVMBusEnabled = TINYNVM_EnableTPI();
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_ENTER_PROGMODE);
+ Endpoint_Write_8(NVMBusEnabled ? XPROG_ERR_OK : XPROG_ERR_FAILED);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
+ * the attached device.
+ */
+static void XPROGProtocol_LeaveXPROGMode(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ XMEGANVM_DisablePDI();
+ else
+ TINYNVM_DisableTPI();
+
+ #if defined(XCK_RESCUE_CLOCK_ENABLE) && defined(ENABLE_ISP_PROTOCOL)
+ /* If the XCK rescue clock option is enabled, we need to restart it once the
+ * XPROG mode has been exited, since the XPROG protocol stops it after use. */
+ ISPTarget_ConfigureRescueClock();
+ #endif
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_LEAVE_PROGMODE);
+ Endpoint_Write_8(XPROG_ERR_OK);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
+static void XPROGProtocol_Erase(void)
+{
+ uint8_t ReturnStatus = XPROG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ } Erase_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL);
+ Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint8_t EraseCommand;
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ {
+ /* Determine which NVM command to send to the device depending on the memory to erase */
+ switch (Erase_XPROG_Params.MemoryType)
+ {
+ case XPROG_ERASE_CHIP:
+ EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
+ break;
+ case XPROG_ERASE_APP:
+ EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
+ break;
+ case XPROG_ERASE_BOOT:
+ EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
+ break;
+ case XPROG_ERASE_EEPROM:
+ EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
+ break;
+ case XPROG_ERASE_APP_PAGE:
+ EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
+ break;
+ case XPROG_ERASE_BOOT_PAGE:
+ EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
+ break;
+ case XPROG_ERASE_EEPROM_PAGE:
+ EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
+ break;
+ case XPROG_ERASE_USERSIG:
+ EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
+ break;
+ default:
+ EraseCommand = XMEGA_NVM_CMD_NOOP;
+ break;
+ }
+
+ /* Erase the target memory, indicate timeout if occurred */
+ if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+ else
+ {
+ if (Erase_XPROG_Params.MemoryType == XPROG_ERASE_CHIP)
+ EraseCommand = TINY_NVM_CMD_CHIPERASE;
+ else
+ EraseCommand = TINY_NVM_CMD_SECTIONERASE;
+
+ /* Erase the target memory, indicate timeout if occurred */
+ if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_ERASE);
+ Endpoint_Write_8(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
+static void XPROGProtocol_WriteMemory(void)
+{
+ uint8_t ReturnStatus = XPROG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint8_t PageMode;
+ uint32_t Address;
+ uint16_t Length;
+ uint8_t ProgData[256];
+ } WriteMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
+ sizeof(WriteMemory_XPROG_Params).ProgData), NULL);
+ WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
+ WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length);
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL);
+
+ // The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
+ // to catch this and discard it before continuing on with packet processing to prevent communication issues
+ if (((sizeof(uint8_t) + sizeof(WriteMemory_XPROG_Params) - sizeof(WriteMemory_XPROG_Params.ProgData)) +
+ WriteMemory_XPROG_Params.Length) % AVRISP_DATA_EPSIZE == 0)
+ {
+ Endpoint_ClearOUT();
+ Endpoint_WaitUntilReady();
+ }
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ {
+ /* Assume FLASH page programming by default, as it is the common case */
+ uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE;
+ uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
+ uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
+ bool PagedMemory = true;
+
+ switch (WriteMemory_XPROG_Params.MemoryType)
+ {
+ case XPROG_MEM_TYPE_APPL:
+ WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
+ break;
+ case XPROG_MEM_TYPE_BOOT:
+ WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
+ break;
+ case XPROG_MEM_TYPE_EEPROM:
+ WriteCommand = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
+ WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
+ EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
+ break;
+ case XPROG_MEM_TYPE_USERSIG:
+ WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG;
+ break;
+ case XPROG_MEM_TYPE_FUSE:
+ WriteCommand = XMEGA_NVM_CMD_WRITEFUSE;
+ PagedMemory = false;
+ break;
+ case XPROG_MEM_TYPE_LOCKBITS:
+ WriteCommand = XMEGA_NVM_CMD_WRITELOCK;
+ PagedMemory = false;
+ break;
+ }
+
+ /* Send the appropriate memory write commands to the device, indicate timeout if occurred */
+ if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
+ WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
+ (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData[0]))))
+ {
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+ }
+ else
+ {
+ /* Send write command to the TPI device, indicate timeout if occurred */
+ if (!(TINYNVM_WriteMemory(WriteMemory_XPROG_Params.Address, WriteMemory_XPROG_Params.ProgData,
+ WriteMemory_XPROG_Params.Length)))
+ {
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+ }
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_WRITE_MEM);
+ Endpoint_Write_8(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
+ * attached device.
+ */
+static void XPROGProtocol_ReadMemory(void)
+{
+ uint8_t ReturnStatus = XPROG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ uint16_t Length;
+ } ReadMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL);
+ ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
+ ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint8_t ReadBuffer[256];
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ {
+ /* Read the PDI target's memory, indicate timeout if occurred */
+ if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+ else
+ {
+ /* Read the TPI target's memory, indicate timeout if occurred */
+ if (!(TINYNVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_READ_MEM);
+ Endpoint_Write_8(ReturnStatus);
+
+ if (ReturnStatus == XPROG_ERR_OK)
+ Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NULL);
+
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
+ * attached device's memory and a data set on the host.
+ */
+static void XPROGProtocol_ReadCRC(void)
+{
+ uint8_t ReturnStatus = XPROG_ERR_OK;
+
+ struct
+ {
+ uint8_t CRCType;
+ } ReadCRC_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL);
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint32_t MemoryCRC;
+
+ if (XPROG_SelectedProtocol == XPROG_PROTOCOL_PDI)
+ {
+ uint8_t CRCCommand;
+
+ /* Determine which NVM command to send to the device depending on the memory to CRC */
+ switch (ReadCRC_XPROG_Params.CRCType)
+ {
+ case XPROG_CRC_APP:
+ CRCCommand = XMEGA_NVM_CMD_APPCRC;
+ break;
+ case XPROG_CRC_BOOT:
+ CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
+ break;
+ default:
+ CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
+ break;
+ }
+
+ /* Perform and retrieve the memory CRC, indicate timeout if occurred */
+ if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
+ ReturnStatus = XPROG_ERR_TIMEOUT;
+ }
+ else
+ {
+ /* TPI does not support memory CRC */
+ ReturnStatus = XPROG_ERR_FAILED;
+ }
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_CRC);
+ Endpoint_Write_8(ReturnStatus);
+
+ if (ReturnStatus == XPROG_ERR_OK)
+ {
+ Endpoint_Write_8(MemoryCRC >> 16);
+ Endpoint_Write_16_LE(MemoryCRC & 0xFFFF);
+ }
+
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
+ * attached device.
+ */
+static void XPROGProtocol_SetParam(void)
+{
+ uint8_t ReturnStatus = XPROG_ERR_OK;
+
+ uint8_t XPROGParam = Endpoint_Read_8();
+
+ /* Determine which parameter is being set, store the new parameter value */
+ switch (XPROGParam)
+ {
+ case XPROG_PARAM_NVMBASE:
+ XPROG_Param_NVMBase = Endpoint_Read_32_BE();
+ break;
+ case XPROG_PARAM_EEPPAGESIZE:
+ XPROG_Param_EEPageSize = Endpoint_Read_16_BE();
+ break;
+ case XPROG_PARAM_NVMCMD_REG:
+ XPROG_Param_NVMCMDRegAddr = Endpoint_Read_8();
+ break;
+ case XPROG_PARAM_NVMCSR_REG:
+ XPROG_Param_NVMCSRRegAddr = Endpoint_Read_8();
+ break;
+ case XPROG_PARAM_UNKNOWN_1:
+ /* TODO: Undocumented parameter added in AVRStudio 5.1, purpose unknown. Must ACK and discard or
+ the communication with AVRStudio 5.1 will fail.
+ */
+ Endpoint_Discard_16();
+ break;
+ default:
+ ReturnStatus = XPROG_ERR_FAILED;
+ break;
+ }
+
+ Endpoint_ClearOUT();
+ Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR);
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_8(CMD_XPROG);
+ Endpoint_Write_8(XPROG_CMD_SET_PARAM);
+ Endpoint_Write_8(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+#endif
+