aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Projects/Benito/Benito.txt
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Projects/Benito/Benito.txt')
-rw-r--r--lib/lufa/Projects/Benito/Benito.txt106
1 files changed, 106 insertions, 0 deletions
diff --git a/lib/lufa/Projects/Benito/Benito.txt b/lib/lufa/Projects/Benito/Benito.txt
new file mode 100644
index 000000000..07bec52b3
--- /dev/null
+++ b/lib/lufa/Projects/Benito/Benito.txt
@@ -0,0 +1,106 @@
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Benito Arduino Programmer Project
+ *
+ * \section Sec_Compat Project Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this project.
+ *
+ * \li Series 7 USB AVRs (AT90USBxxx7)
+ * \li Series 6 USB AVRs (AT90USBxxx6)
+ * \li Series 4 USB AVRs (ATMEGAxxU4)
+ * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this project.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Communications Device Class (CDC)</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Abstract Control Model (ACM)</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF CDC Class Standard \n
+ * Arduino Bootloader Specification</td>
+ * </tr>
+ * <tr>
+ * <td><b>Supported USB Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This
+ * project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse
+ * to appear on a given port pin, to control the target's /RESET pin.
+ *
+ * This is primarily designed to fit the Benito board from www.dorkbotpdx.org, but will suit all USB AVRs.
+ *
+ * After running this project for the first time on a new computer, you will need to supply the .INF file located
+ * in this project's directory as the device's driver when running under Windows. This will enable Windows to use
+ * its inbuilt CDC drivers, negating the need for custom drivers for the device. Other Operating Systems should
+ * automatically use their own inbuilt CDC-ACM drivers.
+ *
+ * \section Sec_Options Project Options
+ *
+ * The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
+ *
+ * <table>
+ * <tr>
+ * <th><b>Define Name:</b></th>
+ * <th><b>Location:</b></th>
+ * <th><b>Description:</b></th>
+ * </tr>
+ * <tr>
+ * <td>AVR_RESET_LINE_PORT</td>
+ * <td>AppConfig.h</td>
+ * <td>Indicates the PORT register of the pin used to generate the target /RESET line pulse.</td>
+ * </tr>
+ * <tr>
+ * <td>AVR_RESET_LINE_DDR</td>
+ * <td>AppConfig.h</td>
+ * <td>Indicates the DDR register of the pin used to generate the target /RESET line pulse.</td>
+ * </tr>
+ * <tr>
+ * <td>AVR_RESET_LINE_MASK</td>
+ * <td>AppConfig.h</td>
+ * <td>Indicates the mask of the pin used to generate the target /RESET line pulse.</td>
+ * </tr>
+ * <tr>
+ * <td>AVR_RESET_PULSE_MS</td>
+ * <td>AppConfig.h</td>
+ * <td>Pulse length in milliseconds for the target /RESET pulse.</td>
+ * </tr>
+ * <tr>
+ * <td>TX_RX_LED_PULSE_MS</td>
+ * <td>AppConfig.h</td>
+ * <td>Pulse length in milliseconds for the activity Tx/Rx LEDs.</td>
+ * </tr>
+ * <tr>
+ * <td>PING_PONG_LED_PULSE_MS</td>
+ * <td>AppConfig.h</td>
+ * <td>Pulse length in milliseconds for the enumeration LED ping-ponging between toggles.</td>
+ * </tr>
+ * <tr>
+ * <td>RECEIVE_BUFFER_FLUSH_MS</td>
+ * <td>AppConfig.h</td>
+ * <td>Period between flushings of received data buffer to the attached USB host.</td>
+ * </tr>
+ * </table>
+ */
+