From 1c2705eea59c6e772dd771c5f77fbbddeda1d61d Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 11 Jun 2016 17:24:28 -0500
Subject: fixed color detection routine in makefile

---
 tmk_core/rules.mk | 58 +++++++++++++++++++++++++++----------------------------
 1 file changed, 28 insertions(+), 30 deletions(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 8cae22b38..79a728245 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -43,7 +43,7 @@
 # make flip-ee = Download the eeprom file to the device, using Atmel FLIP
 #                (must have Atmel FLIP installed).
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -66,7 +66,7 @@ BUILD_DIR = .build
 OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
 
 
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -161,10 +161,8 @@ CFLAGS += -fshort-enums
 CFLAGS += -fno-strict-aliasing
 # add color
 ifeq ($(COLOR),true)
-ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
 	CFLAGS+= -fdiagnostics-color
-else ifeq ("$(shell echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "")
-	CFLAGS+= -fcolor-diagnostics
 endif
 endif
 CFLAGS += -Wall
@@ -223,7 +221,7 @@ endif
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
@@ -239,7 +237,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
+PRINTF_LIB =
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -251,7 +249,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
+SCANF_LIB =
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -263,7 +261,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
+EXTRALIBDIRS =
 
 
 
@@ -324,7 +322,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -358,7 +356,7 @@ endif
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -396,22 +394,22 @@ ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
 ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
 
 # Default target.
-all: 
-	@$(MAKE) begin 
-	@$(MAKE) gccversion 
-	@$(MAKE) sizebefore 
+all:
+	@$(MAKE) begin
+	@$(MAKE) gccversion
+	@$(MAKE) sizebefore
 	@$(MAKE) clean_list # force clean each time
-	@$(MAKE) build 
-	@$(MAKE) sizeafter 
+	@$(MAKE) build
+	@$(MAKE) sizeafter
 	@$(MAKE) end
 
 # Quick make that doesn't clean
-quick: 
-	@$(MAKE) begin 
-	@$(MAKE) gccversion 
-	@$(MAKE) sizebefore 
-	@$(MAKE) build 
-	@$(MAKE) sizeafter 
+quick:
+	@$(MAKE) begin
+	@$(MAKE) gccversion
+	@$(MAKE) sizebefore
+	@$(MAKE) build
+	@$(MAKE) sizeafter
 	@$(MAKE) end
 
 # Change the build target to build a HEX file or a library.
@@ -456,12 +454,12 @@ sizeafter:
 	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
 
 # Display compiler version information.
-gccversion : 
+gccversion :
 	@$(SILENT) || $(CC) --version
 
 
 
-# Program the device.  
+# Program the device.
 program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
 	$(PROGRAM_CMD)
 
@@ -492,7 +490,7 @@ endif
 	dfu-programmer $(MCU) erase
 	dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
 	dfu-programmer $(MCU) reset
-	
+
 dfu-start:
 	dfu-programmer $(MCU) reset
 	dfu-programmer $(MCU) start
@@ -514,9 +512,9 @@ endif
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set
 #     a breakpoint at main().
-gdb-config: 
+gdb-config:
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -618,7 +616,7 @@ $(OBJDIR)/%.o : %.c
 $(OBJDIR)/%.o : %.cpp
 	@mkdir -p $(@D)
 	@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
 	@$(BUILD_CMD)
 
 # Compile: create assembler files from C source files.
@@ -642,7 +640,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ 
+	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
 
 # Target: clean project.
 clean: begin clean_list end
-- 
cgit v1.2.3


From fdaae7ec8836ffa47949bde0d5dd865acb3016e8 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 11 Jun 2016 17:24:28 -0500
Subject: fixed color detection routine in makefile

---
 tmk_core/rules.mk | 550 +++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 356 insertions(+), 194 deletions(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index d2350f27c..8563f1e07 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -14,27 +14,71 @@
 # Frederik Rouleau
 # Carlos Lamas
 #
-
-# Enable vpath seraching for source files only
-# Without this, output files, could be read from the wrong .build directories
-VPATH_SRC := $(VPATH)
-vpath %.c $(VPATH_SRC)
-vpath %.h $(VPATH_SRC)
-vpath %.cpp $(VPATH_SRC)
-vpath %.hpp $(VPATH_SRC)
-vpath %.S $(VPATH_SRC)
-VPATH :=
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
 
 
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
 
-# Optimization level, can be [0, 1, 2, 3, s].
+BUILD_DIR = .build
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
+
+
+# Optimization level, can be [0, 1, 2, 3, s]. 
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 
-COLOR ?= true
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+COLOR?=true
 
 ifeq ($(COLOR),true)
 	NO_COLOR=\033[0m
@@ -45,38 +89,30 @@ ifeq ($(COLOR),true)
 	BOLD=\033[1m
 endif
 
-AUTOGEN ?= false
-
-ifneq ($(shell awk --version 2>/dev/null),)
-	AWK=awk
-else
-	AWK=cat && test
-endif
-
-OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
-ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
-WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
 
 ifndef $(SILENT)
 	SILENT = false
 endif
 
-TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
+TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
 TAB_LOG_PLAIN = printf "$$LOG\n"
-AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
-AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
-PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && exit 1
-PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
-PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && exit 1
-PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
-PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
+AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
+AWK_CMD = awk '{ printf "%-69s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
+PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
+PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
 BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
 
 # List any extra directories to look for include files here.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS += $(subst :, ,$(VPATH_SRC))
+EXTRAINCDIRS = $(subst :, ,$(VPATH))
 
 
 # Compiler flag to set the C Standard level.
@@ -88,14 +124,17 @@ CSTANDARD = -std=gnu99
 
 
 # Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
 CDEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
 ADEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 CPPDEFS += $(OPT_DEFS)
@@ -109,12 +148,20 @@ CPPDEFS += $(OPT_DEFS)
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CFLAGS += -g$(DEBUG)
+CFLAGS = -g$(DEBUG)
 CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fdata-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
 # add color
 ifeq ($(COLOR),true)
-ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
 	CFLAGS+= -fdiagnostics-color
 endif
 endif
@@ -140,9 +187,16 @@ endif
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CPPFLAGS += -g$(DEBUG)
+CPPFLAGS = -g$(DEBUG)
 CPPFLAGS += $(CPPDEFS)
 CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -ffunction-sections
+CPPFLAGS += -fdata-sections
 # to supress "warning: only initialized variables can be placed into program memory area"
 CPPFLAGS += -w
 CPPFLAGS += -Wall
@@ -169,7 +223,7 @@ endif
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
-ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 ifdef CONFIG_H
     ASFLAGS += -include $(CONFIG_H)
@@ -203,6 +257,28 @@ SCANF_LIB =
 MATH_LIB = -lm
 
 
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS = 
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
 #---------------- Linker Options ----------------
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
@@ -211,8 +287,9 @@ MATH_LIB = -lm
 # Comennt out "--relax" option to avoid a error such:
 # 	(.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
 #
-LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
 #LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -220,13 +297,59 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 # You can give EXTRALDFLAGS at 'make' command line.
 LDFLAGS += $(EXTRALDFLAGS)
 
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when 
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
 # Define programs and commands.
 SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
 REMOVE = rm -f
 REMOVEDIR = rmdir
 COPY = cp
 WINSHELL = cmd
 SECHO = $(SILENT) || echo
+# Autodecct teensy loader
+ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+  TEENSY_LOADER_CLI = teensy-loader-cli
+else
+  TEENSY_LOADER_CLI = teensy_loader_cli
+endif
 
 # Define Messages
 # English
@@ -239,7 +362,6 @@ MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_FLASH = Creating load file for Flash:
 MSG_EEPROM = Creating load file for EEPROM:
-MSG_BIN = Creating binary load file for Flash:
 MSG_EXTENDED_LISTING = Creating Extended Listing:
 MSG_SYMBOL_TABLE = Creating Symbol Table:
 MSG_LINKING = Linking:
@@ -248,24 +370,12 @@ MSG_COMPILING_CPP = Compiling:
 MSG_ASSEMBLING = Assembling:
 MSG_CLEANING = Cleaning project:
 MSG_CREATING_LIBRARY = Creating library:
-MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
-	Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
-	git submodule sync --recursive\n\
-	git submodule update --init --recursive$(NO_COLOR)\n\n\
-	You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
-	or if you have modified the ChibiOS libraries yourself. \n\n
+
+
 
 
 # Define all object files.
 OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
-# The files in the lib folder are shared between all keymaps, so generate that folder name by removing
-# the keymap from the name
-KBOBJDIR=$(subst _$(KEYMAP),,$(OBJDIR))
-# And fixup the object files to match
-LIBOBJ = $(foreach v,$(OBJ),$(if $(findstring /lib/,$v),$v))
-NONLIBOBJ := $(filter-out $(LIBOBJ),$(OBJ))
-LIBOBJ := $(subst _$(KEYMAP)/,/,$(LIBOBJ))
-OBJ := $(LIBOBJ) $(NONLIBOBJ)
 
 # Define all listing files.
 LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
@@ -273,20 +383,34 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst
 
 # Compiler flags to generate dependency files.
 #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@)
+GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
 
 
 # Combine all necessary flags and optional flags.
 # Add target processor to flags.
 # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
-ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
-
-MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
+ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
 
 # Default target.
-all: build sizeafter
+all: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) clean_list # force clean each time
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
+
+# Quick make that doesn't clean
+quick: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex
@@ -302,14 +426,17 @@ sym: $(BUILD_DIR)/$(TARGET).sym
 LIBNAME=lib$(TARGET).a
 lib: $(LIBNAME)
 
-check_submodule:
-	git submodule status --recursive | \
-	while IFS= read -r x; do \
-		case "$$x" in \
-			\ *) ;; \
-			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
-		esac \
-	done
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@$(SECHO) $(MSG_BEGIN)
+
+end:
+	@$(SECHO) $(MSG_END)
+
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
@@ -320,31 +447,134 @@ sizebefore:
 	@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 
-sizeafter: $(BUILD_DIR)/$(TARGET).hex
+sizeafter:
 	@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 	# test file sizes eventually
-	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
+	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
 
 # Display compiler version information.
 gccversion :
 	@$(SILENT) || $(CC) --version
 
+
+
+# Program the device.  
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(PROGRAM_CMD)
+
+teensy: $(BUILD_DIR)/$(TARGET).hex
+	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
+
+flip: $(BUILD_DIR)/$(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+dfu-no-build:
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
+	dfu-programmer $(MCU) reset
+	
+dfu-start:
+	dfu-programmer $(MCU) reset
+	dfu-programmer $(MCU) start
+
+flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
+
+dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
+else
+	dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
+endif
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set 
+#     a breakpoint at main().
+gdb-config: 
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+extcoff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf
 	@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
-	$(eval CMD=$(HEX) $< $@)
+	$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
+	@$(BUILD_CMD)
+	@$(COPY) $@ $(TARGET).hex
+	$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
+	$(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
 	@$(BUILD_CMD)
-	@if $(AUTOGEN); then \
-		$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
-		$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
-	else \
-		$(COPY) $@ $(TARGET).hex; \
-	fi
 
 %.eep: %.elf
 	@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
-	$(eval CMD=$(EEP) $< $@ || exit 0)
+	$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
 	@$(BUILD_CMD)
 
 # Create extended listing file from ELF output file.
@@ -359,11 +589,6 @@ gccversion :
 	$(eval CMD=$(NM) -n $< > $@ )
 	@$(BUILD_CMD)
 
-%.bin: %.elf
-	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
-	$(eval CMD=$(BIN) $< $@ || exit 0)
-	@$(BUILD_CMD)
-
 # Create library from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
 .PRECIOUS : $(OBJ)
@@ -372,164 +597,101 @@ gccversion :
 	$(eval CMD=$(AR) $@ $(OBJ) )
 	@$(BUILD_CMD)
 
-BEGIN = gccversion check_submodule sizebefore
-
 # Link: create ELF output file from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).elf
 .PRECIOUS : $(OBJ)
-# Note the obj.txt depeendency is there to force linking if a source file is deleted
-%.elf: $(OBJ) $(OBJDIR)/cflags.txt $(OBJDIR)/ldflags.txt $(OBJDIR)/obj.txt | $(BEGIN)
+%.elf: $(OBJ)
 	@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
-	$(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS))
+	$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
 	@$(BUILD_CMD)
 
-define GEN_OBJRULE
 # Compile: create object files from C source files.
-$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
-	@$$(BUILD_CMD)
+$(OBJDIR)/%.o : %.c
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
+	@$(BUILD_CMD)
 
 # Compile: create object files from C++ source files.
-$1/%.o : %.cpp $1/%.d $1/cppflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING_CPP) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CPPFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
+$(OBJDIR)/%.o : %.cpp
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
 	@$(BUILD_CMD)
 
-# Assemble: create object files from assembler source files.
-$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_ASFLAGS) $$< -o $$@)
-	@$$(BUILD_CMD)
-
-$1/force:
-
-$1/cflags.txt: $1/force
-	echo '$$(ALL_CFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CFLAGS)' > $$@
-
-$1/cppflags.txt: $1/force
-	echo '$$(ALL_CPPFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CPPFLAGS)' > $$@
-
-$1/asflags.txt: $1/force
-	echo '$$(ALL_ASFLAGS)' | cmp -s - $$@ || echo '$$(ALL_ASFLAGS)' > $$@
-
-$1/ldflags.txt: $1/force
-	echo '$$(LDFLAGS)' | cmp -s - $$@ || echo '$$(LDFLAGS)' > $$@
-
-$1/obj.txt: $1/force
-	echo '$$(OBJ)' | cmp -s - $$@ || echo '$$(OBJ)' > $$@
-
-$1/compiler.txt: $1/force
-	$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
-endef
-
-# We have to use static rules for the .d files for some reason
-DEPS = $(patsubst %.o,%.d,$(OBJ))
-# Keep the .d files
-.PRECIOUS: $(DEPS)
-# Empty rule to force recompilation if the .d file is missing
-$(DEPS):
-
-# Since the object files could be in two different folders, generate
-# separate rules for them, rather than having too generic rules
-$(eval $(call GEN_OBJRULE,$(OBJDIR)))
-$(eval $(call GEN_OBJRULE,$(KBOBJDIR)))
-
 # Compile: create assembler files from C source files.
-%.s : %.c | $(BEGIN)
+%.s : %.c
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
 # Compile: create assembler files from C++ source files.
-%.s : %.cpp | $(BEGIN)
+%.s : %.cpp
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
+	@$(BUILD_CMD)
+
 # Create preprocessed source for use in sending a bug report.
-%.i : %.c | $(BEGIN)
-	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ 
 
 # Target: clean project.
-clean:
-	$(REMOVE) -r $(OBJDIR) 2>/dev/null
-	$(REMOVE) -r $(KBOBJDIR) 2>/dev/null
-	$(REMOVE) $(BUILD_DIR)/$(TARGET).*
+clean: begin clean_list end
+
+clean_list :
+	$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
 
 show_path:
 	@echo VPATH=$(VPATH)
 	@echo SRC=$(SRC)
 
-SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
-SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
-SUBDIRS := $(sort $(SUBDIRS))
-# $(error $(SUBDIRS))
-all-keyboards-defaults-%:
+SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
+all-keyboards-defaults:
 	@for x in $(SUBDIRS) ; do \
 		printf "Compiling with default: $$x" | $(AWK_CMD); \
-		LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keyboards-defaults: all-keyboards-defaults-all
-
-KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
-all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
-all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
-all-keyboards: all-keyboards-all
-
-define make_keyboard
-$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
-$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
-$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
-$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
-$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
-@for x in $(KEYMAPS) ; do \
-	printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-	LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
-done
-endef
-
-define make_keyboard_helper
-# Just remove the -all and so on from the first argument and pass it forward
-$(call make_keyboard,$(subst -$2,,$1),$2)
-endef
-
-/keyboards/%-all:
-	$(call make_keyboard_helper,$@,all)
-/keyboards/%-clean:
-	$(call make_keyboard_helper,$@,clean)
-/keyboards/%:
-	$(call make_keyboard_helper,$@,all)
-
-all-keymaps-%:
-	$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
-	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
+all-keyboards: $(KEYBOARDS)
+/keyboard/%:
+	$(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
 	@for x in $(KEYMAPS) ; do \
-		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-		LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keymaps: all-keymaps-all
+all-keymaps:
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
+	@for x in $(KEYMAPS) ; do \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+	done
 
 # Create build directory
 $(shell mkdir $(BUILD_DIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
-$(shell mkdir $(KBOBJDIR) 2>/dev/null)
+
 
 # Include the dependency files.
--include $(patsubst %.o,%.d,$(OBJ))
+-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
 
 
 # Listing of phony targets.
-.PHONY : all finish sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff check_submodule \
+.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
-all-keyboards-defaults all-keyboards all-keymaps \
-all-keyboards-defaults-% all-keyboards-% all-keymaps-%
+all-keyboards-defaults all-keyboards all-keymaps
-- 
cgit v1.2.3


From dd553d460e280298839bddd66fca36ecdf64f721 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 11 Jun 2016 17:24:28 -0500
Subject: fixed color detection routine in makefile

---
 tmk_core/rules.mk | 550 +++++++++++++++++++++++++++++++++++-------------------
 1 file changed, 356 insertions(+), 194 deletions(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index d2350f27c..8563f1e07 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -14,27 +14,71 @@
 # Frederik Rouleau
 # Carlos Lamas
 #
-
-# Enable vpath seraching for source files only
-# Without this, output files, could be read from the wrong .build directories
-VPATH_SRC := $(VPATH)
-vpath %.c $(VPATH_SRC)
-vpath %.h $(VPATH_SRC)
-vpath %.cpp $(VPATH_SRC)
-vpath %.hpp $(VPATH_SRC)
-vpath %.S $(VPATH_SRC)
-VPATH :=
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
 
 
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
 
-# Optimization level, can be [0, 1, 2, 3, s].
+BUILD_DIR = .build
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
+
+
+# Optimization level, can be [0, 1, 2, 3, s]. 
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 
-COLOR ?= true
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+COLOR?=true
 
 ifeq ($(COLOR),true)
 	NO_COLOR=\033[0m
@@ -45,38 +89,30 @@ ifeq ($(COLOR),true)
 	BOLD=\033[1m
 endif
 
-AUTOGEN ?= false
-
-ifneq ($(shell awk --version 2>/dev/null),)
-	AWK=awk
-else
-	AWK=cat && test
-endif
-
-OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
-ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
-WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
 
 ifndef $(SILENT)
 	SILENT = false
 endif
 
-TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
+TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
 TAB_LOG_PLAIN = printf "$$LOG\n"
-AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
-AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
-PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && exit 1
-PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
-PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && exit 1
-PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
-PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
+AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
+AWK_CMD = awk '{ printf "%-69s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
+PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
+PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
 BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
 
 # List any extra directories to look for include files here.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS += $(subst :, ,$(VPATH_SRC))
+EXTRAINCDIRS = $(subst :, ,$(VPATH))
 
 
 # Compiler flag to set the C Standard level.
@@ -88,14 +124,17 @@ CSTANDARD = -std=gnu99
 
 
 # Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
 CDEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
 ADEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 CPPDEFS += $(OPT_DEFS)
@@ -109,12 +148,20 @@ CPPDEFS += $(OPT_DEFS)
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CFLAGS += -g$(DEBUG)
+CFLAGS = -g$(DEBUG)
 CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fdata-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
 # add color
 ifeq ($(COLOR),true)
-ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
 	CFLAGS+= -fdiagnostics-color
 endif
 endif
@@ -140,9 +187,16 @@ endif
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CPPFLAGS += -g$(DEBUG)
+CPPFLAGS = -g$(DEBUG)
 CPPFLAGS += $(CPPDEFS)
 CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -ffunction-sections
+CPPFLAGS += -fdata-sections
 # to supress "warning: only initialized variables can be placed into program memory area"
 CPPFLAGS += -w
 CPPFLAGS += -Wall
@@ -169,7 +223,7 @@ endif
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
-ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 ifdef CONFIG_H
     ASFLAGS += -include $(CONFIG_H)
@@ -203,6 +257,28 @@ SCANF_LIB =
 MATH_LIB = -lm
 
 
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS = 
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
 #---------------- Linker Options ----------------
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
@@ -211,8 +287,9 @@ MATH_LIB = -lm
 # Comennt out "--relax" option to avoid a error such:
 # 	(.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
 #
-LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
 #LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -220,13 +297,59 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 # You can give EXTRALDFLAGS at 'make' command line.
 LDFLAGS += $(EXTRALDFLAGS)
 
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when 
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
 # Define programs and commands.
 SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
 REMOVE = rm -f
 REMOVEDIR = rmdir
 COPY = cp
 WINSHELL = cmd
 SECHO = $(SILENT) || echo
+# Autodecct teensy loader
+ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+  TEENSY_LOADER_CLI = teensy-loader-cli
+else
+  TEENSY_LOADER_CLI = teensy_loader_cli
+endif
 
 # Define Messages
 # English
@@ -239,7 +362,6 @@ MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_FLASH = Creating load file for Flash:
 MSG_EEPROM = Creating load file for EEPROM:
-MSG_BIN = Creating binary load file for Flash:
 MSG_EXTENDED_LISTING = Creating Extended Listing:
 MSG_SYMBOL_TABLE = Creating Symbol Table:
 MSG_LINKING = Linking:
@@ -248,24 +370,12 @@ MSG_COMPILING_CPP = Compiling:
 MSG_ASSEMBLING = Assembling:
 MSG_CLEANING = Cleaning project:
 MSG_CREATING_LIBRARY = Creating library:
-MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
-	Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
-	git submodule sync --recursive\n\
-	git submodule update --init --recursive$(NO_COLOR)\n\n\
-	You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
-	or if you have modified the ChibiOS libraries yourself. \n\n
+
+
 
 
 # Define all object files.
 OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
-# The files in the lib folder are shared between all keymaps, so generate that folder name by removing
-# the keymap from the name
-KBOBJDIR=$(subst _$(KEYMAP),,$(OBJDIR))
-# And fixup the object files to match
-LIBOBJ = $(foreach v,$(OBJ),$(if $(findstring /lib/,$v),$v))
-NONLIBOBJ := $(filter-out $(LIBOBJ),$(OBJ))
-LIBOBJ := $(subst _$(KEYMAP)/,/,$(LIBOBJ))
-OBJ := $(LIBOBJ) $(NONLIBOBJ)
 
 # Define all listing files.
 LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
@@ -273,20 +383,34 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst
 
 # Compiler flags to generate dependency files.
 #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@)
+GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
 
 
 # Combine all necessary flags and optional flags.
 # Add target processor to flags.
 # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
-ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
-
-MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
+ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
 
 # Default target.
-all: build sizeafter
+all: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) clean_list # force clean each time
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
+
+# Quick make that doesn't clean
+quick: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex
@@ -302,14 +426,17 @@ sym: $(BUILD_DIR)/$(TARGET).sym
 LIBNAME=lib$(TARGET).a
 lib: $(LIBNAME)
 
-check_submodule:
-	git submodule status --recursive | \
-	while IFS= read -r x; do \
-		case "$$x" in \
-			\ *) ;; \
-			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
-		esac \
-	done
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@$(SECHO) $(MSG_BEGIN)
+
+end:
+	@$(SECHO) $(MSG_END)
+
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
@@ -320,31 +447,134 @@ sizebefore:
 	@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 
-sizeafter: $(BUILD_DIR)/$(TARGET).hex
+sizeafter:
 	@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 	# test file sizes eventually
-	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
+	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
 
 # Display compiler version information.
 gccversion :
 	@$(SILENT) || $(CC) --version
 
+
+
+# Program the device.  
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(PROGRAM_CMD)
+
+teensy: $(BUILD_DIR)/$(TARGET).hex
+	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
+
+flip: $(BUILD_DIR)/$(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+dfu-no-build:
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
+	dfu-programmer $(MCU) reset
+	
+dfu-start:
+	dfu-programmer $(MCU) reset
+	dfu-programmer $(MCU) start
+
+flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
+
+dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
+else
+	dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
+endif
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set 
+#     a breakpoint at main().
+gdb-config: 
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+extcoff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf
 	@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
-	$(eval CMD=$(HEX) $< $@)
+	$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
+	@$(BUILD_CMD)
+	@$(COPY) $@ $(TARGET).hex
+	$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
+	$(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
 	@$(BUILD_CMD)
-	@if $(AUTOGEN); then \
-		$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
-		$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
-	else \
-		$(COPY) $@ $(TARGET).hex; \
-	fi
 
 %.eep: %.elf
 	@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
-	$(eval CMD=$(EEP) $< $@ || exit 0)
+	$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
 	@$(BUILD_CMD)
 
 # Create extended listing file from ELF output file.
@@ -359,11 +589,6 @@ gccversion :
 	$(eval CMD=$(NM) -n $< > $@ )
 	@$(BUILD_CMD)
 
-%.bin: %.elf
-	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
-	$(eval CMD=$(BIN) $< $@ || exit 0)
-	@$(BUILD_CMD)
-
 # Create library from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
 .PRECIOUS : $(OBJ)
@@ -372,164 +597,101 @@ gccversion :
 	$(eval CMD=$(AR) $@ $(OBJ) )
 	@$(BUILD_CMD)
 
-BEGIN = gccversion check_submodule sizebefore
-
 # Link: create ELF output file from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).elf
 .PRECIOUS : $(OBJ)
-# Note the obj.txt depeendency is there to force linking if a source file is deleted
-%.elf: $(OBJ) $(OBJDIR)/cflags.txt $(OBJDIR)/ldflags.txt $(OBJDIR)/obj.txt | $(BEGIN)
+%.elf: $(OBJ)
 	@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
-	$(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS))
+	$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
 	@$(BUILD_CMD)
 
-define GEN_OBJRULE
 # Compile: create object files from C source files.
-$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
-	@$$(BUILD_CMD)
+$(OBJDIR)/%.o : %.c
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
+	@$(BUILD_CMD)
 
 # Compile: create object files from C++ source files.
-$1/%.o : %.cpp $1/%.d $1/cppflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING_CPP) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CPPFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
+$(OBJDIR)/%.o : %.cpp
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
 	@$(BUILD_CMD)
 
-# Assemble: create object files from assembler source files.
-$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_ASFLAGS) $$< -o $$@)
-	@$$(BUILD_CMD)
-
-$1/force:
-
-$1/cflags.txt: $1/force
-	echo '$$(ALL_CFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CFLAGS)' > $$@
-
-$1/cppflags.txt: $1/force
-	echo '$$(ALL_CPPFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CPPFLAGS)' > $$@
-
-$1/asflags.txt: $1/force
-	echo '$$(ALL_ASFLAGS)' | cmp -s - $$@ || echo '$$(ALL_ASFLAGS)' > $$@
-
-$1/ldflags.txt: $1/force
-	echo '$$(LDFLAGS)' | cmp -s - $$@ || echo '$$(LDFLAGS)' > $$@
-
-$1/obj.txt: $1/force
-	echo '$$(OBJ)' | cmp -s - $$@ || echo '$$(OBJ)' > $$@
-
-$1/compiler.txt: $1/force
-	$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
-endef
-
-# We have to use static rules for the .d files for some reason
-DEPS = $(patsubst %.o,%.d,$(OBJ))
-# Keep the .d files
-.PRECIOUS: $(DEPS)
-# Empty rule to force recompilation if the .d file is missing
-$(DEPS):
-
-# Since the object files could be in two different folders, generate
-# separate rules for them, rather than having too generic rules
-$(eval $(call GEN_OBJRULE,$(OBJDIR)))
-$(eval $(call GEN_OBJRULE,$(KBOBJDIR)))
-
 # Compile: create assembler files from C source files.
-%.s : %.c | $(BEGIN)
+%.s : %.c
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
 # Compile: create assembler files from C++ source files.
-%.s : %.cpp | $(BEGIN)
+%.s : %.cpp
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
+	@$(BUILD_CMD)
+
 # Create preprocessed source for use in sending a bug report.
-%.i : %.c | $(BEGIN)
-	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ 
 
 # Target: clean project.
-clean:
-	$(REMOVE) -r $(OBJDIR) 2>/dev/null
-	$(REMOVE) -r $(KBOBJDIR) 2>/dev/null
-	$(REMOVE) $(BUILD_DIR)/$(TARGET).*
+clean: begin clean_list end
+
+clean_list :
+	$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
 
 show_path:
 	@echo VPATH=$(VPATH)
 	@echo SRC=$(SRC)
 
-SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
-SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
-SUBDIRS := $(sort $(SUBDIRS))
-# $(error $(SUBDIRS))
-all-keyboards-defaults-%:
+SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
+all-keyboards-defaults:
 	@for x in $(SUBDIRS) ; do \
 		printf "Compiling with default: $$x" | $(AWK_CMD); \
-		LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keyboards-defaults: all-keyboards-defaults-all
-
-KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
-all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
-all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
-all-keyboards: all-keyboards-all
-
-define make_keyboard
-$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
-$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
-$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
-$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
-$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
-@for x in $(KEYMAPS) ; do \
-	printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-	LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
-done
-endef
-
-define make_keyboard_helper
-# Just remove the -all and so on from the first argument and pass it forward
-$(call make_keyboard,$(subst -$2,,$1),$2)
-endef
-
-/keyboards/%-all:
-	$(call make_keyboard_helper,$@,all)
-/keyboards/%-clean:
-	$(call make_keyboard_helper,$@,clean)
-/keyboards/%:
-	$(call make_keyboard_helper,$@,all)
-
-all-keymaps-%:
-	$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
-	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
+all-keyboards: $(KEYBOARDS)
+/keyboard/%:
+	$(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
 	@for x in $(KEYMAPS) ; do \
-		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-		LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keymaps: all-keymaps-all
+all-keymaps:
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
+	@for x in $(KEYMAPS) ; do \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+	done
 
 # Create build directory
 $(shell mkdir $(BUILD_DIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
-$(shell mkdir $(KBOBJDIR) 2>/dev/null)
+
 
 # Include the dependency files.
--include $(patsubst %.o,%.d,$(OBJ))
+-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
 
 
 # Listing of phony targets.
-.PHONY : all finish sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff check_submodule \
+.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
-all-keyboards-defaults all-keyboards all-keymaps \
-all-keyboards-defaults-% all-keyboards-% all-keymaps-%
+all-keyboards-defaults all-keyboards all-keymaps
-- 
cgit v1.2.3


From e1590abea9c8d0fbfcd4c4e71f0758709f975d08 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 11 Jun 2016 17:24:28 -0500
Subject: fixed color detection routine in makefile

---
 tmk_core/rules.mk | 161 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 161 insertions(+)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index d2350f27c..f97c5cb49 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -203,6 +203,28 @@ SCANF_LIB =
 MATH_LIB = -lm
 
 
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS = 
+
+
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+
+
 #---------------- Linker Options ----------------
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
@@ -220,6 +242,40 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 # You can give EXTRALDFLAGS at 'make' command line.
 LDFLAGS += $(EXTRALDFLAGS)
 
+
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when 
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+
+
+#============================================================================
+
+
 # Define programs and commands.
 SHELL = sh
 REMOVE = rm -f
@@ -330,6 +386,111 @@ sizeafter: $(BUILD_DIR)/$(TARGET).hex
 gccversion :
 	@$(SILENT) || $(CC) --version
 
+
+
+# Program the device.  
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(PROGRAM_CMD)
+
+teensy: $(BUILD_DIR)/$(TARGET).hex
+	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
+
+flip: $(BUILD_DIR)/$(TARGET).hex
+	batchisp -hardware usb -device $(MCU) -operation erase f
+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+	dfu-programmer $(MCU) reset
+
+dfu-no-build:
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) erase --force
+else
+	dfu-programmer $(MCU) erase
+endif
+	dfu-programmer $(MCU) erase
+	dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
+	dfu-programmer $(MCU) reset
+	
+dfu-start:
+	dfu-programmer $(MCU) reset
+	dfu-programmer $(MCU) start
+
+flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+	$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
+	batchisp -hardware usb -device $(MCU) -operation start reset 0
+	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
+
+dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+	dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
+else
+	dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
+endif
+	dfu-programmer $(MCU) reset
+
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set 
+#     a breakpoint at main().
+gdb-config: 
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+
+
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+
+
+coff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+extcoff: $(BUILD_DIR)/$(TARGET).elf
+	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
+
+
+
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf
 	@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
-- 
cgit v1.2.3


From 2dfe13ac6d12fb2a8e46061cf81ba223adf0550d Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 11 Jun 2016 17:24:28 -0500
Subject: fixed color detection routine in makefile

---
 tmk_core/rules.mk | 389 +++++++++++++++++++++++++++---------------------------
 1 file changed, 195 insertions(+), 194 deletions(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index f97c5cb49..8563f1e07 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -14,27 +14,71 @@
 # Frederik Rouleau
 # Carlos Lamas
 #
-
-# Enable vpath seraching for source files only
-# Without this, output files, could be read from the wrong .build directories
-VPATH_SRC := $(VPATH)
-vpath %.c $(VPATH_SRC)
-vpath %.h $(VPATH_SRC)
-vpath %.cpp $(VPATH_SRC)
-vpath %.hpp $(VPATH_SRC)
-vpath %.S $(VPATH_SRC)
-VPATH :=
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
 
 
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
 
-# Optimization level, can be [0, 1, 2, 3, s].
+BUILD_DIR = .build
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
+
+
+# Optimization level, can be [0, 1, 2, 3, s]. 
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 
-COLOR ?= true
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+COLOR?=true
 
 ifeq ($(COLOR),true)
 	NO_COLOR=\033[0m
@@ -45,38 +89,30 @@ ifeq ($(COLOR),true)
 	BOLD=\033[1m
 endif
 
-AUTOGEN ?= false
-
-ifneq ($(shell awk --version 2>/dev/null),)
-	AWK=awk
-else
-	AWK=cat && test
-endif
-
-OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
-ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
-WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
 
 ifndef $(SILENT)
 	SILENT = false
 endif
 
-TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
+TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
 TAB_LOG_PLAIN = printf "$$LOG\n"
-AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
-AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
-PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && exit 1
-PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
-PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && exit 1
-PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
-PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
+AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
+AWK_CMD = awk '{ printf "%-69s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
+PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
+PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
 BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
 
 # List any extra directories to look for include files here.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS += $(subst :, ,$(VPATH_SRC))
+EXTRAINCDIRS = $(subst :, ,$(VPATH))
 
 
 # Compiler flag to set the C Standard level.
@@ -88,14 +124,17 @@ CSTANDARD = -std=gnu99
 
 
 # Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
 CDEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
 ADEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 CPPDEFS += $(OPT_DEFS)
@@ -109,12 +148,20 @@ CPPDEFS += $(OPT_DEFS)
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CFLAGS += -g$(DEBUG)
+CFLAGS = -g$(DEBUG)
 CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -ffunction-sections
+CFLAGS += -fdata-sections
+CFLAGS += -fno-inline-small-functions
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
 # add color
 ifeq ($(COLOR),true)
-ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
 	CFLAGS+= -fdiagnostics-color
 endif
 endif
@@ -140,9 +187,16 @@ endif
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CPPFLAGS += -g$(DEBUG)
+CPPFLAGS = -g$(DEBUG)
 CPPFLAGS += $(CPPDEFS)
 CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -ffunction-sections
+CPPFLAGS += -fdata-sections
 # to supress "warning: only initialized variables can be placed into program memory area"
 CPPFLAGS += -w
 CPPFLAGS += -Wall
@@ -169,7 +223,7 @@ endif
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
-ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 ifdef CONFIG_H
     ASFLAGS += -include $(CONFIG_H)
@@ -233,8 +287,9 @@ EXTMEMOPTS =
 # Comennt out "--relax" option to avoid a error such:
 # 	(.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
 #
-LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
 #LDFLAGS += -Wl,--relax
+LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -278,11 +333,23 @@ DEBUG_HOST = localhost
 
 # Define programs and commands.
 SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
 REMOVE = rm -f
 REMOVEDIR = rmdir
 COPY = cp
 WINSHELL = cmd
 SECHO = $(SILENT) || echo
+# Autodecct teensy loader
+ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
+  TEENSY_LOADER_CLI = teensy-loader-cli
+else
+  TEENSY_LOADER_CLI = teensy_loader_cli
+endif
 
 # Define Messages
 # English
@@ -295,7 +362,6 @@ MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_FLASH = Creating load file for Flash:
 MSG_EEPROM = Creating load file for EEPROM:
-MSG_BIN = Creating binary load file for Flash:
 MSG_EXTENDED_LISTING = Creating Extended Listing:
 MSG_SYMBOL_TABLE = Creating Symbol Table:
 MSG_LINKING = Linking:
@@ -304,24 +370,12 @@ MSG_COMPILING_CPP = Compiling:
 MSG_ASSEMBLING = Assembling:
 MSG_CLEANING = Cleaning project:
 MSG_CREATING_LIBRARY = Creating library:
-MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
-	Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
-	git submodule sync --recursive\n\
-	git submodule update --init --recursive$(NO_COLOR)\n\n\
-	You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
-	or if you have modified the ChibiOS libraries yourself. \n\n
+
+
 
 
 # Define all object files.
 OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
-# The files in the lib folder are shared between all keymaps, so generate that folder name by removing
-# the keymap from the name
-KBOBJDIR=$(subst _$(KEYMAP),,$(OBJDIR))
-# And fixup the object files to match
-LIBOBJ = $(foreach v,$(OBJ),$(if $(findstring /lib/,$v),$v))
-NONLIBOBJ := $(filter-out $(LIBOBJ),$(OBJ))
-LIBOBJ := $(subst _$(KEYMAP)/,/,$(LIBOBJ))
-OBJ := $(LIBOBJ) $(NONLIBOBJ)
 
 # Define all listing files.
 LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
@@ -329,20 +383,34 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst
 
 # Compiler flags to generate dependency files.
 #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@)
+GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
 
 
 # Combine all necessary flags and optional flags.
 # Add target processor to flags.
 # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
-ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
-
-MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
+ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
 
 # Default target.
-all: build sizeafter
+all: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) clean_list # force clean each time
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
+
+# Quick make that doesn't clean
+quick: 
+	@$(MAKE) begin 
+	@$(MAKE) gccversion 
+	@$(MAKE) sizebefore 
+	@$(MAKE) build 
+	@$(MAKE) sizeafter 
+	@$(MAKE) end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex
@@ -358,14 +426,17 @@ sym: $(BUILD_DIR)/$(TARGET).sym
 LIBNAME=lib$(TARGET).a
 lib: $(LIBNAME)
 
-check_submodule:
-	git submodule status --recursive | \
-	while IFS= read -r x; do \
-		case "$$x" in \
-			\ *) ;; \
-			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
-		esac \
-	done
+
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@$(SECHO) $(MSG_BEGIN)
+
+end:
+	@$(SECHO) $(MSG_END)
+
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
@@ -376,11 +447,11 @@ sizebefore:
 	@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 
-sizeafter: $(BUILD_DIR)/$(TARGET).hex
+sizeafter:
 	@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 	# test file sizes eventually
-	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
+	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
 
 # Display compiler version information.
 gccversion :
@@ -494,18 +565,16 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf
 	@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
-	$(eval CMD=$(HEX) $< $@)
+	$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
+	@$(BUILD_CMD)
+	@$(COPY) $@ $(TARGET).hex
+	$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
+	$(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
 	@$(BUILD_CMD)
-	@if $(AUTOGEN); then \
-		$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
-		$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
-	else \
-		$(COPY) $@ $(TARGET).hex; \
-	fi
 
 %.eep: %.elf
 	@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
-	$(eval CMD=$(EEP) $< $@ || exit 0)
+	$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
 	@$(BUILD_CMD)
 
 # Create extended listing file from ELF output file.
@@ -520,11 +589,6 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	$(eval CMD=$(NM) -n $< > $@ )
 	@$(BUILD_CMD)
 
-%.bin: %.elf
-	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
-	$(eval CMD=$(BIN) $< $@ || exit 0)
-	@$(BUILD_CMD)
-
 # Create library from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
 .PRECIOUS : $(OBJ)
@@ -533,164 +597,101 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	$(eval CMD=$(AR) $@ $(OBJ) )
 	@$(BUILD_CMD)
 
-BEGIN = gccversion check_submodule sizebefore
-
 # Link: create ELF output file from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).elf
 .PRECIOUS : $(OBJ)
-# Note the obj.txt depeendency is there to force linking if a source file is deleted
-%.elf: $(OBJ) $(OBJDIR)/cflags.txt $(OBJDIR)/ldflags.txt $(OBJDIR)/obj.txt | $(BEGIN)
+%.elf: $(OBJ)
 	@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
-	$(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS))
+	$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
 	@$(BUILD_CMD)
 
-define GEN_OBJRULE
 # Compile: create object files from C source files.
-$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
-	@$$(BUILD_CMD)
+$(OBJDIR)/%.o : %.c
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
+	@$(BUILD_CMD)
 
 # Compile: create object files from C++ source files.
-$1/%.o : %.cpp $1/%.d $1/cppflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$$(SILENT) || printf "$$(MSG_COMPILING_CPP) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_CPPFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
+$(OBJDIR)/%.o : %.cpp
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
 	@$(BUILD_CMD)
 
-# Assemble: create object files from assembler source files.
-$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN)
-	@mkdir -p $$(@D)
-	@$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD)
-	$$(eval CMD=$$(CC) -c $$(ALL_ASFLAGS) $$< -o $$@)
-	@$$(BUILD_CMD)
-
-$1/force:
-
-$1/cflags.txt: $1/force
-	echo '$$(ALL_CFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CFLAGS)' > $$@
-
-$1/cppflags.txt: $1/force
-	echo '$$(ALL_CPPFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CPPFLAGS)' > $$@
-
-$1/asflags.txt: $1/force
-	echo '$$(ALL_ASFLAGS)' | cmp -s - $$@ || echo '$$(ALL_ASFLAGS)' > $$@
-
-$1/ldflags.txt: $1/force
-	echo '$$(LDFLAGS)' | cmp -s - $$@ || echo '$$(LDFLAGS)' > $$@
-
-$1/obj.txt: $1/force
-	echo '$$(OBJ)' | cmp -s - $$@ || echo '$$(OBJ)' > $$@
-
-$1/compiler.txt: $1/force
-	$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
-endef
-
-# We have to use static rules for the .d files for some reason
-DEPS = $(patsubst %.o,%.d,$(OBJ))
-# Keep the .d files
-.PRECIOUS: $(DEPS)
-# Empty rule to force recompilation if the .d file is missing
-$(DEPS):
-
-# Since the object files could be in two different folders, generate
-# separate rules for them, rather than having too generic rules
-$(eval $(call GEN_OBJRULE,$(OBJDIR)))
-$(eval $(call GEN_OBJRULE,$(KBOBJDIR)))
-
 # Compile: create assembler files from C source files.
-%.s : %.c | $(BEGIN)
+%.s : %.c
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
 # Compile: create assembler files from C++ source files.
-%.s : %.cpp | $(BEGIN)
+%.s : %.cpp
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@mkdir -p $(@D)
+	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+	$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
+	@$(BUILD_CMD)
+
 # Create preprocessed source for use in sending a bug report.
-%.i : %.c | $(BEGIN)
-	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ 
 
 # Target: clean project.
-clean:
-	$(REMOVE) -r $(OBJDIR) 2>/dev/null
-	$(REMOVE) -r $(KBOBJDIR) 2>/dev/null
-	$(REMOVE) $(BUILD_DIR)/$(TARGET).*
+clean: begin clean_list end
+
+clean_list :
+	$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
+	$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
 
 show_path:
 	@echo VPATH=$(VPATH)
 	@echo SRC=$(SRC)
 
-SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
-SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
-SUBDIRS := $(sort $(SUBDIRS))
-# $(error $(SUBDIRS))
-all-keyboards-defaults-%:
+SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
+all-keyboards-defaults:
 	@for x in $(SUBDIRS) ; do \
 		printf "Compiling with default: $$x" | $(AWK_CMD); \
-		LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keyboards-defaults: all-keyboards-defaults-all
-
-KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
-all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
-all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
-all-keyboards: all-keyboards-all
-
-define make_keyboard
-$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
-$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
-$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
-$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
-$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
-@for x in $(KEYMAPS) ; do \
-	printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-	LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
-done
-endef
-
-define make_keyboard_helper
-# Just remove the -all and so on from the first argument and pass it forward
-$(call make_keyboard,$(subst -$2,,$1),$2)
-endef
-
-/keyboards/%-all:
-	$(call make_keyboard_helper,$@,all)
-/keyboards/%-clean:
-	$(call make_keyboard_helper,$@,clean)
-/keyboards/%:
-	$(call make_keyboard_helper,$@,all)
-
-all-keymaps-%:
-	$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
-	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
+all-keyboards: $(KEYBOARDS)
+/keyboard/%:
+	$(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
 	@for x in $(KEYMAPS) ; do \
-		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
-		LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keymaps: all-keymaps-all
+all-keymaps:
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
+	@for x in $(KEYMAPS) ; do \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+		LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+	done
 
 # Create build directory
 $(shell mkdir $(BUILD_DIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
-$(shell mkdir $(KBOBJDIR) 2>/dev/null)
+
 
 # Include the dependency files.
--include $(patsubst %.o,%.d,$(OBJ))
+-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
 
 
 # Listing of phony targets.
-.PHONY : all finish sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff check_submodule \
+.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
-all-keyboards-defaults all-keyboards all-keymaps \
-all-keyboards-defaults-% all-keyboards-% all-keymaps-%
+all-keyboards-defaults all-keyboards all-keymaps
-- 
cgit v1.2.3


From 462e516ad9afb3540b70597afffed4fe77ae8988 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 20 Aug 2016 08:34:42 -0500
Subject: Merge

---
 tmk_core/rules.mk | 550 +++++++++++++++++++-----------------------------------
 1 file changed, 194 insertions(+), 356 deletions(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 8563f1e07..86ad90f5d 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -14,71 +14,27 @@
 # Frederik Rouleau
 # Carlos Lamas
 #
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
+
+# Enable vpath seraching for source files only
+# Without this, output files, could be read from the wrong .build directories
+VPATH_SRC := $(VPATH)
+vpath %.c $(VPATH_SRC)
+vpath %.h $(VPATH_SRC)
+vpath %.cpp $(VPATH_SRC)
+vpath %.hpp $(VPATH_SRC)
+vpath %.S $(VPATH_SRC)
+VPATH :=
 
 
 # Output format. (can be srec, ihex, binary)
 FORMAT = ihex
 
-BUILD_DIR = .build
-
-# Object files directory
-#     To put object files in current directory, use a dot (.), do NOT make
-#     this an empty or blank macro!
-OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
-
-
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 
-
-# Debugging format.
-#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-#     AVR Studio 4.10 requires dwarf-2.
-#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-COLOR?=true
+COLOR ?= true
 
 ifeq ($(COLOR),true)
 	NO_COLOR=\033[0m
@@ -89,30 +45,38 @@ ifeq ($(COLOR),true)
 	BOLD=\033[1m
 endif
 
-OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
-ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
-WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
+AUTOGEN ?= false
+
+ifneq ($(shell awk --version 2>/dev/null),)
+	AWK=awk
+else
+	AWK=cat && test
+endif
+
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
 
 ifndef $(SILENT)
 	SILENT = false
 endif
 
-TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
+TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
 TAB_LOG_PLAIN = printf "$$LOG\n"
-AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
-AWK_CMD = awk '{ printf "%-69s", $$0; }'
-PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
-PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
-PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
-PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
-PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
+AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
+AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && exit 1
+PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && exit 1
+PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
 BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
 
 # List any extra directories to look for include files here.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(subst :, ,$(VPATH))
+EXTRAINCDIRS += $(subst :, ,$(VPATH_SRC))
 
 
 # Compiler flag to set the C Standard level.
@@ -124,17 +88,14 @@ CSTANDARD = -std=gnu99
 
 
 # Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
 CDEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
 ADEFS += $(OPT_DEFS)
 
 
 # Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 CPPDEFS += $(OPT_DEFS)
@@ -148,20 +109,12 @@ CPPDEFS += $(OPT_DEFS)
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
+CFLAGS += -g$(DEBUG)
 CFLAGS += $(CDEFS)
 CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fdata-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
 # add color
 ifeq ($(COLOR),true)
-ifeq ("$(echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
 	CFLAGS+= -fdiagnostics-color
 endif
 endif
@@ -187,16 +140,9 @@ endif
 #  -Wall...:     warning level
 #  -Wa,...:      tell GCC to pass this to the assembler.
 #    -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += -g$(DEBUG)
 CPPFLAGS += $(CPPDEFS)
 CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fdata-sections
 # to supress "warning: only initialized variables can be placed into program memory area"
 CPPFLAGS += -w
 CPPFLAGS += -Wall
@@ -223,7 +169,7 @@ endif
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
 ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 ifdef CONFIG_H
     ASFLAGS += -include $(CONFIG_H)
@@ -257,28 +203,6 @@ SCANF_LIB =
 MATH_LIB = -lm
 
 
-# List any extra directories to look for libraries here.
-#     Each directory must be seperated by a space.
-#     Use forward slashes for directory separators.
-#     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
 #---------------- Linker Options ----------------
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
@@ -287,9 +211,8 @@ EXTMEMOPTS =
 # Comennt out "--relax" option to avoid a error such:
 # 	(.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
 #
-LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
+LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
 #LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
@@ -297,59 +220,13 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 # You can give EXTRALDFLAGS at 'make' command line.
 LDFLAGS += $(EXTRALDFLAGS)
 
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
-#     avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
 # Define programs and commands.
 SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
 REMOVE = rm -f
 REMOVEDIR = rmdir
 COPY = cp
 WINSHELL = cmd
 SECHO = $(SILENT) || echo
-# Autodecct teensy loader
-ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
-  TEENSY_LOADER_CLI = teensy-loader-cli
-else
-  TEENSY_LOADER_CLI = teensy_loader_cli
-endif
 
 # Define Messages
 # English
@@ -362,6 +239,7 @@ MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_FLASH = Creating load file for Flash:
 MSG_EEPROM = Creating load file for EEPROM:
+MSG_BIN = Creating binary load file for Flash:
 MSG_EXTENDED_LISTING = Creating Extended Listing:
 MSG_SYMBOL_TABLE = Creating Symbol Table:
 MSG_LINKING = Linking:
@@ -370,12 +248,24 @@ MSG_COMPILING_CPP = Compiling:
 MSG_ASSEMBLING = Assembling:
 MSG_CLEANING = Cleaning project:
 MSG_CREATING_LIBRARY = Creating library:
-
-
+MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
+	Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
+	git submodule sync --recursive\n\
+	git submodule update --init --recursive$(NO_COLOR)\n\n\
+	You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
+	or if you have modified the ChibiOS libraries yourself. \n\n
 
 
 # Define all object files.
 OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC))))
+# The files in the lib folder are shared between all keymaps, so generate that folder name by removing
+# the keymap from the name
+KBOBJDIR=$(subst _$(KEYMAP),,$(OBJDIR))
+# And fixup the object files to match
+LIBOBJ = $(foreach v,$(OBJ),$(if $(findstring /lib/,$v),$v))
+NONLIBOBJ := $(filter-out $(LIBOBJ),$(OBJ))
+LIBOBJ := $(subst _$(KEYMAP)/,/,$(LIBOBJ))
+OBJ := $(LIBOBJ) $(NONLIBOBJ)
 
 # Define all listing files.
 LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC))))
@@ -383,34 +273,20 @@ LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst
 
 # Compiler flags to generate dependency files.
 #GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
+GENDEPFLAGS = -MMD -MP -MF $(patsubst %.o,%.td,$@)
 
 
 # Combine all necessary flags and optional flags.
 # Add target processor to flags.
 # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
-ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
+ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
+
+MOVE_DEP = mv -f $(patsubst %.o,%.td,$@) $(patsubst %.o,%.d,$@)
 
 # Default target.
-all: 
-	@$(MAKE) begin 
-	@$(MAKE) gccversion 
-	@$(MAKE) sizebefore 
-	@$(MAKE) clean_list # force clean each time
-	@$(MAKE) build 
-	@$(MAKE) sizeafter 
-	@$(MAKE) end
-
-# Quick make that doesn't clean
-quick: 
-	@$(MAKE) begin 
-	@$(MAKE) gccversion 
-	@$(MAKE) sizebefore 
-	@$(MAKE) build 
-	@$(MAKE) sizeafter 
-	@$(MAKE) end
+all: build sizeafter
 
 # Change the build target to build a HEX file or a library.
 build: elf hex
@@ -426,17 +302,14 @@ sym: $(BUILD_DIR)/$(TARGET).sym
 LIBNAME=lib$(TARGET).a
 lib: $(LIBNAME)
 
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
-	@$(SECHO) $(MSG_BEGIN)
-
-end:
-	@$(SECHO) $(MSG_END)
-
+check_submodule:
+	git submodule status --recursive | \
+	while IFS= read -r x; do \
+		case "$$x" in \
+			\ *) ;; \
+			*) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
+		esac \
+	done
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
@@ -447,134 +320,31 @@ sizebefore:
 	@if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 
-sizeafter:
+sizeafter: $(BUILD_DIR)/$(TARGET).hex
 	@if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
 	2>/dev/null; $(SECHO); fi
 	# test file sizes eventually
-	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
+	# @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
 
 # Display compiler version information.
 gccversion :
 	@$(SILENT) || $(CC) --version
 
-
-
-# Program the device.  
-program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-	$(PROGRAM_CMD)
-
-teensy: $(BUILD_DIR)/$(TARGET).hex
-	$(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-
-flip: $(BUILD_DIR)/$(TARGET).hex
-	batchisp -hardware usb -device $(MCU) -operation erase f
-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
-	dfu-programmer $(MCU) erase --force
-else
-	dfu-programmer $(MCU) erase
-endif
-	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
-	dfu-programmer $(MCU) reset
-
-dfu-no-build:
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
-	dfu-programmer $(MCU) erase --force
-else
-	dfu-programmer $(MCU) erase
-endif
-	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
-	dfu-programmer $(MCU) reset
-	
-dfu-start:
-	dfu-programmer $(MCU) reset
-	dfu-programmer $(MCU) start
-
-flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-	$(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
-	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
-	batchisp -hardware usb -device $(MCU) -operation start reset 0
-	$(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
-
-dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
-	dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
-else
-	dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
-endif
-	dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
-#     a breakpoint at main().
-gdb-config: 
-	@$(REMOVE) $(GDBINIT_FILE)
-	@echo define reset >> $(GDBINIT_FILE)
-	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
-	@echo end >> $(GDBINIT_FILE)
-	@echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
-	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
-	@echo load  >> $(GDBINIT_FILE)
-endif
-	@echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
-	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
-	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
-	$(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
-	@$(WINSHELL) /c pause
-
-else
-	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
-	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
-	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(BUILD_DIR)/$(TARGET).elf
-	@$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
-	$(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
-
-
-extcoff: $(BUILD_DIR)/$(TARGET).elf
-	@$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
-	$(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
-
-
-
 # Create final output files (.hex, .eep) from ELF output file.
 %.hex: %.elf
 	@$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
-	$(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
-	@$(BUILD_CMD)
-	@$(COPY) $@ $(TARGET).hex
-	$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
-	$(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
+	$(eval CMD=$(HEX) $< $@)
 	@$(BUILD_CMD)
+	@if $(AUTOGEN); then \
+		$(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
+		$(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
+	else \
+		$(COPY) $@ $(TARGET).hex; \
+	fi
 
 %.eep: %.elf
 	@$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
-	$(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
+	$(eval CMD=$(EEP) $< $@ || exit 0)
 	@$(BUILD_CMD)
 
 # Create extended listing file from ELF output file.
@@ -589,6 +359,11 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	$(eval CMD=$(NM) -n $< > $@ )
 	@$(BUILD_CMD)
 
+%.bin: %.elf
+	@$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
+	$(eval CMD=$(BIN) $< $@ || exit 0)
+	@$(BUILD_CMD)
+
 # Create library from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).a
 .PRECIOUS : $(OBJ)
@@ -597,101 +372,164 @@ extcoff: $(BUILD_DIR)/$(TARGET).elf
 	$(eval CMD=$(AR) $@ $(OBJ) )
 	@$(BUILD_CMD)
 
+BEGIN = gccversion check_submodule sizebefore
+
 # Link: create ELF output file from object files.
 .SECONDARY : $(BUILD_DIR)/$(TARGET).elf
 .PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
+# Note the obj.txt depeendency is there to force linking if a source file is deleted
+%.elf: $(OBJ) $(OBJDIR)/cflags.txt $(OBJDIR)/ldflags.txt $(OBJDIR)/obj.txt | $(BEGIN)
 	@$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
-	$(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
+	$(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS))
 	@$(BUILD_CMD)
 
+define GEN_OBJRULE
 # Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
-	@mkdir -p $(@D)
-	@$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
-	$(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
-	@$(BUILD_CMD)
+$1/%.o : %.c $1/%.d $1/cflags.txt $1/compiler.txt | $(BEGIN)
+	@mkdir -p $$(@D)
+	@$$(SILENT) || printf "$$(MSG_COMPILING) $$<" | $$(AWK_CMD)
+	$$(eval CMD=$$(CC) -c $$(ALL_CFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
+	@$$(BUILD_CMD)
 
 # Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
-	@mkdir -p $(@D)
-	@$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+$1/%.o : %.cpp $1/%.d $1/cppflags.txt $1/compiler.txt | $(BEGIN)
+	@mkdir -p $$(@D)
+	@$$(SILENT) || printf "$$(MSG_COMPILING_CPP) $$<" | $$(AWK_CMD)
+	$$(eval CMD=$$(CC) -c $$(ALL_CPPFLAGS) $$(GENDEPFLAGS) $$< -o $$@ && $$(MOVE_DEP))
 	@$(BUILD_CMD)
 
+# Assemble: create object files from assembler source files.
+$1/%.o : %.S $1/asflags.txt $1/compiler.txt | $(BEGIN)
+	@mkdir -p $$(@D)
+	@$(SILENT) || printf "$$(MSG_ASSEMBLING) $$<" | $$(AWK_CMD)
+	$$(eval CMD=$$(CC) -c $$(ALL_ASFLAGS) $$< -o $$@)
+	@$$(BUILD_CMD)
+
+$1/force:
+
+$1/cflags.txt: $1/force
+	echo '$$(ALL_CFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CFLAGS)' > $$@
+
+$1/cppflags.txt: $1/force
+	echo '$$(ALL_CPPFLAGS)' | cmp -s - $$@ || echo '$$(ALL_CPPFLAGS)' > $$@
+
+$1/asflags.txt: $1/force
+	echo '$$(ALL_ASFLAGS)' | cmp -s - $$@ || echo '$$(ALL_ASFLAGS)' > $$@
+
+$1/ldflags.txt: $1/force
+	echo '$$(LDFLAGS)' | cmp -s - $$@ || echo '$$(LDFLAGS)' > $$@
+
+$1/obj.txt: $1/force
+	echo '$$(OBJ)' | cmp -s - $$@ || echo '$$(OBJ)' > $$@
+
+$1/compiler.txt: $1/force
+	$$(CC) --version | cmp -s - $$@ || $$(CC) --version > $$@
+endef
+
+# We have to use static rules for the .d files for some reason
+DEPS = $(patsubst %.o,%.d,$(OBJ))
+# Keep the .d files
+.PRECIOUS: $(DEPS)
+# Empty rule to force recompilation if the .d file is missing
+$(DEPS):
+
+# Since the object files could be in two different folders, generate
+# separate rules for them, rather than having too generic rules
+$(eval $(call GEN_OBJRULE,$(OBJDIR)))
+$(eval $(call GEN_OBJRULE,$(KBOBJDIR)))
+
 # Compile: create assembler files from C source files.
-%.s : %.c
+%.s : %.c | $(BEGIN)
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
 # Compile: create assembler files from C++ source files.
-%.s : %.cpp
+%.s : %.cpp | $(BEGIN)
 	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
 	$(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
 	@$(BUILD_CMD)
 
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
-	@mkdir -p $(@D)
-	@$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
-	$(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
-	@$(BUILD_CMD)
-
 # Create preprocessed source for use in sending a bug report.
-%.i : %.c
-	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@ 
+%.i : %.c | $(BEGIN)
+	$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
 
 # Target: clean project.
-clean: begin clean_list end
-
-clean_list :
-	$(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
-	$(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
-	$(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
+clean:
+	$(REMOVE) -r $(OBJDIR) 2>/dev/null
+	$(REMOVE) -r $(KBOBJDIR) 2>/dev/null
+	$(REMOVE) $(BUILD_DIR)/$(TARGET).*
 
 show_path:
 	@echo VPATH=$(VPATH)
 	@echo SRC=$(SRC)
 
-SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
-all-keyboards-defaults:
+SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
+SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
+SUBDIRS := $(sort $(SUBDIRS))
+# $(error $(SUBDIRS))
+all-keyboards-defaults-%:
 	@for x in $(SUBDIRS) ; do \
 		printf "Compiling with default: $$x" | $(AWK_CMD); \
-		LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
-all-keyboards: $(KEYBOARDS)
-/keyboard/%:
-	$(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
-	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
+all-keyboards-defaults: all-keyboards-defaults-all
+
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
+all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
+all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
+all-keyboards: all-keyboards-all
+
+define make_keyboard
+$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
+$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
+$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
+$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
+@for x in $(KEYMAPS) ; do \
+	printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
+	LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+done
+endef
+
+define make_keyboard_helper
+# Just remove the -all and so on from the first argument and pass it forward
+$(call make_keyboard,$(subst -$2,,$1),$2)
+endef
+
+/keyboards/%-all:
+	$(call make_keyboard_helper,$@,all)
+/keyboards/%-clean:
+	$(call make_keyboard_helper,$@,clean)
+/keyboards/%:
+	$(call make_keyboard_helper,$@,all)
+
+all-keymaps-%:
+	$(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
+	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
 	@for x in $(KEYMAPS) ; do \
-		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
-		LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
+		LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
 	done
 
-all-keymaps:
-	$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
-	@for x in $(KEYMAPS) ; do \
-		printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
-		LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
-	done
+all-keymaps: all-keymaps-all
 
 # Create build directory
 $(shell mkdir $(BUILD_DIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
-
+$(shell mkdir $(KBOBJDIR) 2>/dev/null)
 
 # Include the dependency files.
--include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
+-include $(patsubst %.o,%.d,$(OBJ))
 
 
 # Listing of phony targets.
-.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff \
+.PHONY : all finish sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff check_submodule \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
-all-keyboards-defaults all-keyboards all-keymaps
+all-keyboards-defaults all-keyboards all-keymaps \
+all-keyboards-defaults-% all-keyboards-% all-keymaps-%
\ No newline at end of file
-- 
cgit v1.2.3


From 5febdb0a3c9e63d79d6695ebc1f58259669dd168 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 20 Aug 2016 10:26:36 -0500
Subject: Initial Commmit

---
 keyboards/vision_division/Makefile                 |  75 ++++++++++
 keyboards/vision_division/config.h                 | 162 +++++++++++++++++++++
 keyboards/vision_division/keymaps/default/Makefile |  21 +++
 keyboards/vision_division/keymaps/default/config.h |   8 +
 keyboards/vision_division/keymaps/default/keymap.c |  44 ++++++
 .../vision_division/keymaps/default/readme.md      |   1 +
 keyboards/vision_division/readme.md                |  28 ++++
 keyboards/vision_division/vision_division.c        |  28 ++++
 keyboards/vision_division/vision_division.h        |  19 +++
 tmk_core/rules.mk                                  |   2 +-
 10 files changed, 387 insertions(+), 1 deletion(-)
 create mode 100644 keyboards/vision_division/Makefile
 create mode 100644 keyboards/vision_division/config.h
 create mode 100644 keyboards/vision_division/keymaps/default/Makefile
 create mode 100644 keyboards/vision_division/keymaps/default/config.h
 create mode 100644 keyboards/vision_division/keymaps/default/keymap.c
 create mode 100644 keyboards/vision_division/keymaps/default/readme.md
 create mode 100644 keyboards/vision_division/readme.md
 create mode 100644 keyboards/vision_division/vision_division.c
 create mode 100644 keyboards/vision_division/vision_division.h

diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile
new file mode 100644
index 000000000..3f6d133c9
--- /dev/null
+++ b/keyboards/vision_division/Makefile
@@ -0,0 +1,75 @@
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=512
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes        # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= no            # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI controls
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif
+
+
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
new file mode 100644
index 000000000..106cf384c
--- /dev/null
+++ b/keyboards/vision_division/config.h
@@ -0,0 +1,162 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    You
+#define PRODUCT         vision_division
+#define DESCRIPTION     A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 2
+#define MATRIX_COLS 3
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D5 }
+#define MATRIX_COL_PINS { F1, F0, B0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+ 
+// #define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
new file mode 100644
index 000000000..f4671a9d1
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -0,0 +1,21 @@
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in 
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
new file mode 100644
index 000000000..df06a2620
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -0,0 +1,8 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+// place overrides here
+
+#endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
new file mode 100644
index 000000000..599c2cb52
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -0,0 +1,44 @@
+#include "vision_division.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = KEYMAP( /* Base */
+  KC_A,  KC_1,  KC_H, \
+    KC_TAB,  KC_SPC   \
+),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+  // MACRODOWN only works in this function
+      switch(id) {
+        case 0:
+          if (record->event.pressed) {
+            register_code(KC_RSFT);
+          } else {
+            unregister_code(KC_RSFT);
+          }
+        break;
+      }
+    return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/readme.md b/keyboards/vision_division/keymaps/default/readme.md
new file mode 100644
index 000000000..bb0ed3862
--- /dev/null
+++ b/keyboards/vision_division/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for vision_division
\ No newline at end of file
diff --git a/keyboards/vision_division/readme.md b/keyboards/vision_division/readme.md
new file mode 100644
index 000000000..0a637fd06
--- /dev/null
+++ b/keyboards/vision_division/readme.md
@@ -0,0 +1,28 @@
+vision_division keyboard firmware
+======================
+
+## Quantum MK Firmware
+
+For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
+
+## Building
+
+Download or clone the whole firmware and navigate to the keyboards/vision_division folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. 
+
+Depending on which keymap you would like to use, you will have to compile slightly differently.
+
+### Default
+
+To build with the default keymap, simply run `make`.
+
+### Other Keymaps
+
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
+
+To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
+
+```
+$ make keymap=[default|jack|<name>]
+```
+
+Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
\ No newline at end of file
diff --git a/keyboards/vision_division/vision_division.c b/keyboards/vision_division/vision_division.c
new file mode 100644
index 000000000..eb9336fa3
--- /dev/null
+++ b/keyboards/vision_division/vision_division.c
@@ -0,0 +1,28 @@
+#include "vision_division.h"
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+	// put your per-action keyboard code here
+	// runs for every action, just before processing by the firmware
+
+	return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+	led_set_user(usb_led);
+}
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
new file mode 100644
index 000000000..d30fc8499
--- /dev/null
+++ b/keyboards/vision_division/vision_division.h
@@ -0,0 +1,19 @@
+#ifndef VISION_DIVISION_H
+#define VISION_DIVISION_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguements
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+    k00, k01, k02, \
+      k10,  k11   \
+) \
+{ \
+    { k00, k01,   k02 }, \
+    { k10, KC_NO, k11 }, \
+}
+
+#endif
diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 86ad90f5d..d2350f27c 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -532,4 +532,4 @@ build elf hex eep lss sym coff extcoff check_submodule \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
 all-keyboards-defaults all-keyboards all-keymaps \
-all-keyboards-defaults-% all-keyboards-% all-keymaps-%
\ No newline at end of file
+all-keyboards-defaults-% all-keyboards-% all-keymaps-%
-- 
cgit v1.2.3


From 4807feec8a8ea51db40b881b5057784b2b00310b Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sat, 20 Aug 2016 14:49:16 -0500
Subject: In Progress Merge

---
 keyboards/vision_division/Makefile                 |  11 +-
 keyboards/vision_division/config.h                 |  31 ++++--
 keyboards/vision_division/keymaps/default/Makefile |   2 +-
 keyboards/vision_division/vision_division.h        | 111 ++++++++++++++++++++-
 4 files changed, 137 insertions(+), 18 deletions(-)

diff --git a/keyboards/vision_division/Makefile b/keyboards/vision_division/Makefile
index 3f6d133c9..4f3130c48 100644
--- a/keyboards/vision_division/Makefile
+++ b/keyboards/vision_division/Makefile
@@ -1,8 +1,9 @@
 
 
 # MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
+MCU = at90usb1286
+# MCU = at90usb1287
+# MCU = atmega32u4
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
@@ -47,13 +48,13 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=512
+OPT_DEFS += -DBOOTLOADER_SIZE=1024
 
 
 # Build Options
 #   change yes to no to disable
 #
-BOOTMAGIC_ENABLE ?= no      # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE ?= yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
 CONSOLE_ENABLE ?= yes        # Console for debug(+400)
@@ -61,7 +62,7 @@ COMMAND_ENABLE ?= yes        # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE ?= no            # USB Nkey Rollover
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
 BACKLIGHT_ENABLE ?= no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE ?= no            # MIDI controls
 UNICODE_ENABLE ?= no         # Unicode
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 106cf384c..1faea335a 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -22,15 +22,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0x2525
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    You
-#define PRODUCT         vision_division
-#define DESCRIPTION     A custom keyboard
+#define PRODUCT         Vision Division
+#define DESCRIPTION     Split or Full Keyboard
+#define MATRIX_EXTENDED
 
 /* key matrix size */
-#define MATRIX_ROWS 2
-#define MATRIX_COLS 3
+#ifdef MATRIX_EXTENDED
+	#define MATRIX_ROWS 6
+	#define MATRIX_COLS 24
+#else 
+	#define MATRIX_ROWS 6
+	#define MATRIX_COLS 12
+#endif
 
 /*
  * Keyboard Matrix Assignments
@@ -42,8 +48,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
  *
 */
-#define MATRIX_ROW_PINS { D0, D5 }
-#define MATRIX_COL_PINS { F1, F0, B0 }
+
+#ifdef MATRIX_EXTENDED
+ // Note that the extended colums are reversed because the second PCB has col 1 on the far right.
+	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3, E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7}
+#else #ifdef MATRIX_LEFT 
+	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 }
+
+
+	#define MATRIX_COL_PINS { B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 }
+#endif
+
 #define UNUSED_PINS
 
 /* COL2ROW or ROW2COL */
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index f4671a9d1..43fee2668 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -2,7 +2,7 @@
 #   change to "no" to disable the options, or define them in the Makefile in 
 #   the appropriate keymap folder that will get included automatically
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
 CONSOLE_ENABLE = no         # Console for debug(+400)
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
index d30fc8499..deeb85c1f 100644
--- a/keyboards/vision_division/vision_division.h
+++ b/keyboards/vision_division/vision_division.h
@@ -7,13 +7,114 @@
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
-#define KEYMAP( \
-    k00, k01, k02, \
-      k10,  k11   \
+#define KEYMAP_EXTENDED( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+{ \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
+    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
+    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
+    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
+}
+
+#define KEYMAP_LEFT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+{ \
+    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C },\
+    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C },\
+    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C },\
+    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C },\
+    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C },\
+    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C },\
+}
+
+#define KEYMAP_RIGHT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
 ) \
 { \
-    { k00, k01,   k02 }, \
-    { k10, KC_NO, k11 }, \
+    { k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
+    { k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
+    { k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
+    { k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
+    { k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
+    { k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
 }
 
+#ifdef MATRIX_EXTENDED
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_EXTENDED( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+#endif
+
+#ifdef MATRIX_LEFT
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_LEFT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+#endif
+
+#ifdef MATRIX_RIGHT
+#define KEYMAP( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+) \
+KEYMAP_RIGHT( \
+      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
+      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
+      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
+      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
+      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
+)
+
+#endif
+
+
 #endif
-- 
cgit v1.2.3


From 705c775a4a433249081321cea0c2def2627817dc Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Sun, 21 Aug 2016 22:05:55 -0500
Subject: Nightly

Only major change to qmk was the addition of A0-A7 pins for the AT90USB
---
 keyboards/vision_division/Potential Layouts.txt    |  84 +++++++++++
 keyboards/vision_division/config.h                 |  44 +-----
 keyboards/vision_division/keymaps/default/config.h |  36 ++++-
 keyboards/vision_division/keymaps/default/keymap.c |  28 +++-
 keyboards/vision_division/matrix_types.h           | 167 +++++++++++++++++++++
 keyboards/vision_division/vision_division.h        | 114 --------------
 quantum/config_common.h                            |   9 ++
 7 files changed, 321 insertions(+), 161 deletions(-)
 create mode 100644 keyboards/vision_division/Potential Layouts.txt
 create mode 100644 keyboards/vision_division/matrix_types.h

diff --git a/keyboards/vision_division/Potential Layouts.txt b/keyboards/vision_division/Potential Layouts.txt
new file mode 100644
index 000000000..f715ac8c6
--- /dev/null
+++ b/keyboards/vision_division/Potential Layouts.txt	
@@ -0,0 +1,84 @@
+/* Numeric Max / Numeric Normal - Full Grid
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
+
+//* Numeric Max / Homing Normal - Full Grid
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ */
+
+//* Numeric Max / Homing Normal - Traditional
+ * .-----------------------------------.       .-----------------------------------.        .-----------------_-----------------.        .-----------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------'        '-----------------------------------'        '-----------------------------------'       '--------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+ * |--------+--------+--------+        |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       '--------+--------+--------'
+ * |        |        |        |        |   o   |        |        |        |        |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------|   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|                .--------.
+ * |        |        |        |        |       |                 |        |        |        |        |        |        |        |        |        |        |                 |                |        |
+ * |--------+--------+--------+        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       .--------+--------+--------.
+ * |                 |        |        |       |        |        |        |        |        |        |                 |        |        |        |        |        |        |       |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+ */
+
+/* Numeric Max / Numeric Normal
+ * .-----------------------------------.       .--------------------------------------------------------------_--------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |  1U    |        |        |  1U    |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |  1U    |        |        |  1U    |
+ * |  /     +--------+--------+  /     |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |  /     +--------+--------+  /     |
+ * |  2U    |        |        |  2U    |   o   |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |                 |       |  2U    |        |        |  2U    |
+ * |--------+--------+--------+--------|   o   |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |        '--------+--------'        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |        '--------+--------'        |
+ * |  1U / 2UH / 2UV |  1U / 2UH / 2UV |       |        |        |        |        |        |        |     1U / 2U     |        |        |        |        |        |        |       |  1U / 2UH / 2UV |  1U / 2UH / 2UV |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
+
+/* Numeric Max / Numeric Max
+ * .-----------------------------------.       .-----------------------------------------------------------------------_-----------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |        |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------------------------.       .-----------------------------------.
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |--------+--------+--------+--------|       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------+--------|
+ * |  1U    |        |        |  1U    |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |  1U    |        |        |  1U    |
+ * |  /     +--------+--------+  /     |   o   |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |  /     +--------+--------+  /     |
+ * |  2U    |        |        |  2U    |   o   |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |                 |       |  2U    |        |        |  2U    |
+ * |--------+--------+--------+--------|   o   |-----------------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|       |--------+--------+--------+--------|
+ * |        |        |        |        |       |     1U / 2U     |        |        |        |        |        |        |        |        |        |        |        |        |     1U / 2U     |       |        |        |        |        |
+ * |        '--------+--------'        |       |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |        '--------+--------'        |
+ * |  1U / 2UH / 2UV |  1U / 2UH / 2UV |       |        |        |        |        |        |        |     1U / 2U     |     1U / 2U     |        |        |        |        |        |        |       |  1U / 2UH / 2UV |  1U / 2UH / 2UV |
+ * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------------------------'       '-----------------------------------'
+ */
diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 1faea335a..37b834973 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -20,52 +20,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2525
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    You
-#define PRODUCT         Vision Division
-#define DESCRIPTION     Split or Full Keyboard
-#define MATRIX_EXTENDED
-
-/* key matrix size */
-#ifdef MATRIX_EXTENDED
-	#define MATRIX_ROWS 6
-	#define MATRIX_COLS 24
-#else 
-	#define MATRIX_ROWS 6
-	#define MATRIX_COLS 12
-#endif
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
+// Due to the configurability of this keyboard, matrix sizes are determined in the keymap's config.h
 
-#ifdef MATRIX_EXTENDED
- // Note that the extended colums are reversed because the second PCB has col 1 on the far right.
-	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
-	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3, E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7}
-#else #ifdef MATRIX_LEFT 
-	#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
-	#define MATRIX_COL_PINS { C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3 }
-
-
-	#define MATRIX_COL_PINS { B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1 }
-#endif
-
-#define UNUSED_PINS
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
- 
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index df06a2620..c005aa8c5 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -2,7 +2,41 @@
 #define CONFIG_USER_H
 
 #include "../../config.h"
+#include "matrix_types.h"
 
-// place overrides here
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      GET_PID(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    IBNobody
+#define PRODUCT         Vision Division
+#define DESCRIPTION     Full / Split Keyboard
+
+
+#define MATRIX_ROWS 6
+#define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
+
+#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+
+#define UNUSED_PINS
+
+#define KEYMAP( \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B, k61C  \
+) \
+KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
+      k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \
+      k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C  \
+) \
 
 #endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
index 599c2cb52..3fddee78b 100644
--- a/keyboards/vision_division/keymaps/default/keymap.c
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -1,10 +1,30 @@
 #include "vision_division.h"
 
+
+
+
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = KEYMAP( /* Base */
-  KC_A,  KC_1,  KC_H, \
-    KC_TAB,  KC_SPC   \
-),
+
+  [0] = KEYMAP( \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
+    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
+    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12  \
+)
+
+/*
+      KC_VOLU, KC_MUTE, KC_VOLU, KC_F24,           KC_F20,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12     k119, k11A, k11B, k11C, \
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,          KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,       k219, k21A, k21B, k21C, \
+      KC_KP_7, KC_KP_8, KC_KP_9, KC_F23,           KC_F19,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,       k319, k31A, k31B, k31C, \
+      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,          KC_F18,  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP,       k419, k41A, k41B, k41C, \
+      KC_KP_1, KC_KP_2, KC_KP_3, KC_F22,           KC_F17,  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN,       k519, k51A, k51B, k51C. \
+      KC_KP_0, KC_F21,  KC_PDOT, KC_PENT,          KC_F16,  KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT,       k619, k61A, k61B, k61C  \
+
+    ) //-----, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------,
+
+*/
 };
 
 const uint16_t PROGMEM fn_actions[] = {
diff --git a/keyboards/vision_division/matrix_types.h b/keyboards/vision_division/matrix_types.h
new file mode 100644
index 000000000..d40b2079a
--- /dev/null
+++ b/keyboards/vision_division/matrix_types.h
@@ -0,0 +1,167 @@
+#ifndef MATRIX_TYPES_H
+#define MATRIX_TYPES_H
+
+// Because the vision/division keyboard allows for multiple PCB configurations, the configuration
+// can get tricky. The PCB itself has 12 columns, but to achieve a full sized 14-column keyboard
+// with a 4-column numeric pad on the left and a 3-column homing key cluster on the right, the
+// right PCB must have its rightmost column cut off. Also either the rightmost two columns on the
+// left PCB or the leftmost two columns on the right PCB need to be cut away.
+//
+//                          _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
+// Left Numeric Max       = 1 2 3 4 _ 5 6 7 8 9 0 A B C
+// Left Homing Max        =   2 3 4 _ 5 6 7 8 9 0 A B C
+// Left Numeric Extended  = 1 2 3 4 _ 5 6 7 8 9 0 A B
+// Left Homing Extended   =   2 3 4 _ 5 6 7 8 9 0 A B
+// Left Numeric Normal    = 1 2 3 4 _ 5 6 7 8 9 0 A
+// Left Homing Normal     =   2 3 4 _ 5 6 7 8 9 0 A
+// Right Numeric Max      =                             1 2 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Max       =                             1 2 3 4 5 6 7 8 _ 9 A B
+// Right Numeric Extended =                               2 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Extended  =                               2 3 4 5 6 7 8 _ 9 A B
+// Right Numeric Normal   =                                 3 4 5 6 7 8 _ 9 A B C
+// Right Homing Normal    =                                 3 4 5 6 7 8 _ 9 A B
+//
+//
+// A full keyboard would look like this:
+//
+// _Left_Numeric_Max__________|_Right_Homing_Normal
+// 1 2 3 4 _ 5 6 7 8 9 0 A B C|3 4 5 6 7 8 _ 9 A B
+//
+// The ideal full keyboard would use a normal and max rather than two extended because the max
+// size allows for a centered 2U space key.
+
+
+#define MATRIX_TYPE_ABSENT                      0
+#define MATRIX_TYPE_NUMERIC_MAX                 1
+#define MATRIX_TYPE_HOMING_MAX                  2
+#define MATRIX_TYPE_NUMERIC_EXTENDED            3
+#define MATRIX_TYPE_HOMING_EXTENDED             4
+#define MATRIX_TYPE_NUMERIC_NORMAL              5
+#define MATRIX_TYPE_HOMING_NORMAL               6
+#define MATRIX_TYPE_NUMERIC_MAX_TEENSY          7
+#define MATRIX_TYPE_HOMING_MAX_TEENSY           8
+#define MATRIX_TYPE_NUMERIC_EXTENDED_TEENSY     9
+#define MATRIX_TYPE_HOMING_EXTENDED_TEENSY      10
+#define MATRIX_TYPE_NUMERIC_NORMAL_TEENSY       11
+#define MATRIX_TYPE_HOMING_NORMAL_TEENSY        12
+
+
+// Column Length
+
+#define MATRIX_COLS_ABSENT                       0
+#define MATRIX_COLS_NUMERIC_MAX                 12
+#define MATRIX_COLS_HOMING_MAX                  11
+#define MATRIX_COLS_NUMERIC_EXTENDED            11
+#define MATRIX_COLS_HOMING_EXTENDED             10
+#define MATRIX_COLS_NUMERIC_NORMAL              10
+#define MATRIX_COLS_HOMING_NORMAL                9
+#define MATRIX_COLS_NUMERIC_MAX_TEENSY          12
+#define MATRIX_COLS_HOMING_MAX_TEENSY           11
+#define MATRIX_COLS_NUMERIC_EXTENDED_TEENSY     11
+#define MATRIX_COLS_HOMING_EXTENDED_TEENSY      10
+#define MATRIX_COLS_NUMERIC_NORMAL_TEENSY       10
+#define MATRIX_COLS_HOMING_NORMAL_TEENSY         9
+
+// Left PCB Pin assignments
+
+#define MATRIX_COL_PINS_LEFT_ABSENT
+
+#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX                 C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6
+#define MATRIX_COL_PINS_LEFT_HOMING_MAX                      C5, C4, A7, A3, A6, A2, A5, A1, A0, A4, E6
+#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED            C7, C5, C4, A7, A3, A6, A2, A5, A1, A0, A4
+#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED                 C5, C4, A7, A3, A6, A2, A5, A1, A0, A4
+#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL              C7, C5, C4, A7, A3, A6, A2, A5, A1, A0
+#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL                   C5, C4, A7, A3, A6, A2, A5, A1, A0
+
+#define MATRIX_COL_PINS_LEFT_NUMERIC_MAX_TEENSY          C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3
+#define MATRIX_COL_PINS_LEFT_HOMING_MAX_TEENSY               C0, E1, E0, F3, F2, F1, F0, B0, B1, B2, B3
+#define MATRIX_COL_PINS_LEFT_NUMERIC_EXTENDED_TEENSY     C1, C0, E1, E0, F3, F2, F1, F0, B0, B1, B2
+#define MATRIX_COL_PINS_LEFT_HOMING_EXTENDED_TEENSY          C0, E1, E0, F3, F2, F1, F0, B0, B1, B2
+#define MATRIX_COL_PINS_LEFT_NUMERIC_NORMAL_TEENSY       C1, C0, E1, E0, F3, F2, F1, F0, B0, B1
+#define MATRIX_COL_PINS_LEFT_HOMING_NORMAL_TEENSY            C0, E1, E0, F3, F2, F1, F0, B0, B1
+
+// Right PCB Pin assignments
+
+#define MATRIX_COL_PINS_RIGHT_ABSENT
+
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX                 E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_MAX                  E6, A4, A0, A1, A5, A2, A6, A3, A7, C4, C5
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED                A4, A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED                 A4, A0, A1, A5, A2, A6, A3, A7, C4, C5
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL                      A0, A1, A5, A2, A6, A3, A7, C4, C5, C7
+#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL                       A0, A1, A5, A2, A6, A3, A7, C4, C5
+
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_MAX_TEENSY          B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_MAX_TEENSY           B3, B2, B1, B0, F0, F1, F2, F3, E0, E1, C0
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_EXTENDED_TEENSY         B2, B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_EXTENDED_TEENSY          B2, B1, B0, F0, F1, F2, F3, E0, E1, C0
+#define MATRIX_COL_PINS_RIGHT_NUMERIC_NORMAL_TEENSY               B1, B0, F0, F1, F2, F3, E0, E1, C0, C1
+#define MATRIX_COL_PINS_RIGHT_HOMING_NORMAL_TEENSY                B1, B0, F0, F1, F2, F3, E0, E1, C0
+
+// Fetch Macros
+
+#define GET_PID(LEFT_TYPE, RIGHT_TYPE) ( ( ( MATRIX_TYPE_ ## LEFT_TYPE ) << 8 ) + ( MATRIX_TYPE_ ## RIGHT_TYPE ) )
+#define GET_MATRIX_COL(TYPE) MATRIX_COLS_ ## TYPE
+#define GET_MATRIX_COLS(LEFT_TYPE, RIGHT_TYPE) ( ( GET_MATRIX_COL(LEFT_TYPE) ) + ( GET_MATRIX_COL(RIGHT_TYPE) ) )
+#define GET_MATRIX_COL_PINS(LEFT_TYPE, RIGHT_TYPE) { MATRIX_COL_PINS_LEFT_ ## LEFT_TYPE, MATRIX_COL_PINS_RIGHT_ ## RIGHT_TYPE }
+
+// Specialized Row Macros
+
+#define KEYMAP_ROW_LEFT_ABSENT(                   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)
+
+#define KEYMAP_ROW_LEFT_NUMERIC_MAX(              k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_HOMING_MAX(               k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED(         k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_HOMING_EXTENDED(          k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL(           k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_HOMING_NORMAL(            k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_NUMERIC_MAX_TEENSY(       k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_HOMING_MAX_TEENSY(        k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_LEFT_NUMERIC_EXTENDED_TEENSY(  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_HOMING_EXTENDED_TEENSY(   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_LEFT_NUMERIC_NORMAL_TEENSY(    k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A
+#define KEYMAP_ROW_LEFT_HOMING_NORMAL_TEENSY(     k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A
+
+#define KEYMAP_ROW_RIGHT_ABSENT(                  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)
+
+#define KEYMAP_ROW_RIGHT_NUMERIC_MAX(             k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_MAX(              k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED(        k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED(         k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL(          k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_NORMAL(           k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_MAX_TEENSY(      k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_MAX_TEENSY(       k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_EXTENDED_TEENSY( k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_EXTENDED_TEENSY(  k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)        k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+#define KEYMAP_ROW_RIGHT_NUMERIC_NORMAL_TEENSY(   k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C
+#define KEYMAP_ROW_RIGHT_HOMING_NORMAL_TEENSY(    k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C)             k03, k04, k05, k06, k07, k08, k09, k0A, k0B
+
+// Changable Row Macro
+
+#define KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, \
+  k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
+) \
+KEYMAP_ROW_LEFT_ ## LEFT_TYPE(k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C), KEYMAP_ROW_RIGHT_ ## RIGHT_TYPE(k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C)
+
+// Changable Master Macro
+
+#define KEYMAP_MASTER(LEFT_TYPE, RIGHT_TYPE, \
+      k001, k002, k003, k004,       k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018,       k019, k01A, k01B, k01C, \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, k41C, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, k51C  \
+) \
+{ \
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C ) },\
+    { KEYMAP_ROW(LEFT_TYPE, RIGHT_TYPE, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C ) },\
+}
+
+
+#endif // MATRIX_TYPES_H
\ No newline at end of file
diff --git a/keyboards/vision_division/vision_division.h b/keyboards/vision_division/vision_division.h
index deeb85c1f..a1f3195e9 100644
--- a/keyboards/vision_division/vision_division.h
+++ b/keyboards/vision_division/vision_division.h
@@ -3,118 +3,4 @@
 
 #include "quantum.h"
 
-// This a shortcut to help you visually see your layout.
-// The following is an example using the Planck MIT layout
-// The first section contains all of the arguements
-// The second converts the arguments into a two-dimensional array
-#define KEYMAP_EXTENDED( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
-    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
-    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
-    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
-    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
-    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
-}
-
-#define KEYMAP_LEFT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C },\
-    { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C },\
-    { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C },\
-    { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C },\
-    { k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C },\
-    { k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C },\
-}
-
-#define KEYMAP_RIGHT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-{ \
-    { k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C },\
-    { k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C },\
-    { k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C },\
-    { k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C },\
-    { k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C },\
-    { k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C },\
-}
-
-#ifdef MATRIX_EXTENDED
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_EXTENDED( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-#endif
-
-#ifdef MATRIX_LEFT
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_LEFT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-#endif
-
-#ifdef MATRIX_RIGHT
-#define KEYMAP( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-) \
-KEYMAP_RIGHT( \
-      k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k00A, k00B, k00C, k010, k011, k012, k013, k014, k015, k016, k017, k018, k019, k01A, k01B, k01C \
-      k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, k10B, k10C, k110, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, k11C \
-      k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, k20B, k20C, k210, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, k21C \
-      k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, k30B, k30C, k310, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, k31C \
-      k400, k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k410, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C \
-      k500, k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k510, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C \
-)
-
-#endif
-
-
 #endif
diff --git a/quantum/config_common.h b/quantum/config_common.h
index 09a4fe701..7ef4b23d4 100644
--- a/quantum/config_common.h
+++ b/quantum/config_common.h
@@ -45,6 +45,15 @@
 #define F5 0xF5
 #define F6 0xF6
 #define F7 0xF7
+#define A0 0xA0
+#define A1 0xA1
+#define A2 0xA2
+#define A3 0xA3
+#define A4 0xA4
+#define A5 0xA5
+#define A6 0xA6
+#define A7 0xA7
+
 
 /* USART configuration */
 #ifdef BLUETOOTH_ENABLE
-- 
cgit v1.2.3


From 6c2b7f359cfe5122631d8772f8766c08465949c8 Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Tue, 23 Aug 2016 20:47:35 -0500
Subject: Fixed line ending

---
 tmk_core/rules.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk
index 86ad90f5d..d2350f27c 100644
--- a/tmk_core/rules.mk
+++ b/tmk_core/rules.mk
@@ -532,4 +532,4 @@ build elf hex eep lss sym coff extcoff check_submodule \
 clean clean_list debug gdb-config show_path \
 program teensy dfu flip dfu-ee flip-ee dfu-start \
 all-keyboards-defaults all-keyboards all-keymaps \
-all-keyboards-defaults-% all-keyboards-% all-keymaps-%
\ No newline at end of file
+all-keyboards-defaults-% all-keyboards-% all-keymaps-%
-- 
cgit v1.2.3


From a902206735972a15063d8d9852a87041d82d6e7b Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Tue, 23 Aug 2016 23:05:35 -0500
Subject: Nightly

Prep for Vision build
---
 keyboards/atomic/keymaps/pvc/keymap.c              |  32 +-
 keyboards/planck/keymaps/pvc/keymap.c              |  20 +-
 keyboards/vision_division/keymaps/default/Makefile |   4 +-
 keyboards/vision_division/keymaps/default/config.h |  19 +-
 keyboards/vision_division/keymaps/default/keymap.c | 632 +++++++++++++++++++--
 5 files changed, 652 insertions(+), 55 deletions(-)

diff --git a/keyboards/atomic/keymaps/pvc/keymap.c b/keyboards/atomic/keymaps/pvc/keymap.c
index f16ec8a6e..b02e89d2c 100644
--- a/keyboards/atomic/keymaps/pvc/keymap.c
+++ b/keyboards/atomic/keymaps/pvc/keymap.c
@@ -154,7 +154,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* UPPER
  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
- * | PRINT  | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
+ * | PRINT  | BR TOG | BR SP+ | BR SP- | BR RST | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        | F1     | F2     | F3     | F4     |        |        | 7      | 8      | 9      | -      |        |        |        | INS    |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
@@ -180,9 +180,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      |        |        |        | INS    |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
- * |        | ^      | *      | +      | -      | ;      | :      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
+ * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
- * |        | |      | &      | !      | ~      | /      | \      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
+ * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
  * |        |        |        |        |        |                 |        |        |        |        |        |        |        |        |
  * '--------------------------------------------------------------------------------------------------------------------------------------'
@@ -191,16 +191,30 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [LAYER_LOWER]        = { // LOWER
   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   _______, _______, _______, KC_INS   },
-  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
-  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
+  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
+  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
  },
 
+/* FUNCTION
+ * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+ * | NUM LK |        |        |        |        |        |        |        |        |        |        |        |        | XXXXXX .        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+ * | SCR LK | F13    | F14    | F15    | F16    |        |        |        |        |        |        |        |        |        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+ * | CAP LK | F17    | F18    | F19    | F20    |        |        |        |        |        |        |        | XXXXXX .        |        |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+ * |        | F21    | F22    | F23    | F24    |        |        |        |        |        |        | XXXXXX .        | VOL UP | MUTE   |
+ * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+ * |        |        |        |        |        | PLAY/PAUSE      |        |        |        |        |        | PTRACK | VOL DN | NTRACK |
+ * '--------------------------------------------------------------------------------------------------------------------------------------'
+ */
+
  [LAYER_FUNCTION]     = { // FUNCTION
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
-  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_F21,  KC_F22,  KC_F23,  KC_F24,  _______, KC_PAUS  },
-  { KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_PSCR  },
-  { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, KC_VOLU, KC_MUTE  },
+  { KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+  { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+  { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXX  },
+  { _______, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_VOLU, KC_MUTE  },
   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT  },
  },
 
diff --git a/keyboards/planck/keymaps/pvc/keymap.c b/keyboards/planck/keymaps/pvc/keymap.c
index 2fc5f0da1..0bb7f0def 100644
--- a/keyboards/planck/keymaps/pvc/keymap.c
+++ b/keyboards/planck/keymaps/pvc/keymap.c
@@ -166,9 +166,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * .-----------------------------------------------------------------------------------------------------------.
  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      | PG UP  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        | ^      | *      | +      | -      | ;      | :      | _      | '      | "      | `      | PG DN  |
+ * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      | PG DN  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * |        | |      | &      | !      | ~      | /      | \      | =      | <      | >      | ?      | HOME   |
+ * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | HOME   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
  * |        |        |        |        |        |        |        |        |        |        |        | END    |
  * '-----------------------------------------------------------------------------------------------------------'
@@ -176,27 +176,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
  [LAYER_LOWER]        = { // LOWER
   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   KC_PGUP  },
-  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SCLN, KC_COLN, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  KC_PGDN  },
-  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SLSH, KC_BSLS, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, KC_HOME  },
+  { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  KC_PGDN  },
+  { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, KC_HOME  },
   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END   },
  },
 
 
 /* FUNCTION
  * .-----------------------------------------------------------------------------------------------------------.
- * | NUM LK | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | PAUSE  |
+ * | NUM LK | F13    | F14    | F15    | F16    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | PAUSE  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | CAP LK | F11    | F12    | F13    | F14    | F15    | F16    | F17    | F18    | F19    | F20    | PRINT  |
+ * | CAP LK | F17    | F18    | F19    | F20    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | PRINT  |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
- * | SCR LK | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE   |
+ * | SCR LK | F21    | F22    | F23    | F24    | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | XXXXXX | MUTE   |
  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | PLAY   | PLAY   | LOWER  | VOL UP | VOL DN | NEXT   | PREV   |
  * '-----------------------------------------------------------------------------------------------------------'
  */
  [LAYER_FUNCTION]     = { // FUNCTION
-  { KC_NLCK, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_PAUS  },
-  { KC_CAPS, KC_F11,  KC_F12,  KC_F13,  KC_F14,  KC_F15,  KC_F16,  KC_F17,  KC_F18,  KC_F19,  KC_F20,  KC_PSCR  },
-  { KC_SLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE  },
+  { KC_NLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PAUS  },
+  { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSCR  },
+  { KC_SLCK, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MUTE  },
   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, KC_VOLU, KC_VOLD, KC_MPRV, KC_MNXT  },
  },
 
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index 43fee2668..393a9e23a 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -1,11 +1,11 @@
 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in 
+#   change to "no" to disable the options, or define them in the Makefile in
 #   the appropriate keymap folder that will get included automatically
 #
 BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
+CONSOLE_ENABLE = yes        # Console for debug(+400)
 COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index c005aa8c5..34eaaff5b 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -22,7 +22,7 @@
 
 #define UNUSED_PINS
 
-#define KEYMAP( \
+/*#define KEYMAP( \
       k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k10B, k10C, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, k11C, \
       k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k20B, k20C, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, k21C, \
       k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k30B, k30C, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, k31C, \
@@ -37,6 +37,23 @@ KEYMAP_MASTER(NUMERIC_MAX_TEENSY, NUMERIC_MAX, \
       k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, k40B, k40C, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, k41C, \
       k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, k50B, k50C, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, k51C, \
       k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, k60B, k60C, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, k61C  \
+)*/
+
+#define KEYMAP( \
+      k101, k102, k103, k104,       k105, k106, k107, k108, k109, k10A, k111, k112, k113, k114, k115, k116, k117, k118,       k119, k11A, k11B, \
+      k201, k202, k203, k204,       k205, k206, k207, k208, k209, k20A, k211, k212, k213, k214, k215, k216, k217, k218,       k219, k21A, k21B, \
+      k301, k302, k303, k304,       k305, k306, k307, k308, k309, k30A, k311, k312, k313, k314, k315, k316, k317, k318,       k319, k31A, k31B, \
+      k401, k402, k403, k404,       k405, k406, k407, k408, k409, k40A, k411, k412, k413, k414, k415, k416, k417, k418,       k419, k41A, k41B, \
+      k501, k502, k503, k504,       k505, k506, k507, k508, k509, k50A, k511, k512, k513, k514, k515, k516, k517, k518,       k519, k51A, k51B, \
+      k601, k602, k603, k604,       k605, k606, k607, k608, k609, k60A, k611, k612, k613, k614, k615, k616, k617, k618,       k619, k61A, k61B  \
 ) \
+KEYMAP_MASTER(NUMERIC_NORMAL, HOMING_MAX_TEENSY, \
+      k101, k102, k103, k104, k105, k106, k107, k108, k109, k10A, KC_NO, KC_NO, k111, k112, k113, k114, k115, k116, k117, k118, k119, k11A, k11B, KC_NO, \
+      k201, k202, k203, k204, k205, k206, k207, k208, k209, k20A, KC_NO, KC_NO, k211, k212, k213, k214, k215, k216, k217, k218, k219, k21A, k21B, KC_NO, \
+      k301, k302, k303, k304, k305, k306, k307, k308, k309, k30A, KC_NO, KC_NO, k311, k312, k313, k314, k315, k316, k317, k318, k319, k31A, k31B, KC_NO, \
+      k401, k402, k403, k404, k405, k406, k407, k408, k409, k40A, KC_NO, KC_NO, k411, k412, k413, k414, k415, k416, k417, k418, k419, k41A, k41B, KC_NO, \
+      k501, k502, k503, k504, k505, k506, k507, k508, k509, k50A, KC_NO, KC_NO, k511, k512, k513, k514, k515, k516, k517, k518, k519, k51A, k51B, KC_NO, \
+      k601, k602, k603, k604, k605, k606, k607, k608, k609, k60A, KC_NO, KC_NO, k611, k612, k613, k614, k615, k616, k617, k618, k619, k61A, k61B, KC_NO  \
+)
 
 #endif
\ No newline at end of file
diff --git a/keyboards/vision_division/keymaps/default/keymap.c b/keyboards/vision_division/keymaps/default/keymap.c
index 3fddee78b..b8cef9c75 100644
--- a/keyboards/vision_division/keymaps/default/keymap.c
+++ b/keyboards/vision_division/keymaps/default/keymap.c
@@ -1,64 +1,630 @@
 #include "vision_division.h"
+#include "action_layer.h"
+#include "eeconfig.h"
+#include "led.h"
 
+#ifdef AUDIO_ENABLE
+    #include "audio.h"
+    #include "song_list.h"
+#endif
 
+#define LAYER_QWERTY                     0
+#define LAYER_COLEMAK                    1
+#define LAYER_DVORAK                     2
+#define LAYER_UPPER                      3
+#define LAYER_LOWER                      4
+#define LAYER_FUNCTION                   5
+#define LAYER_MOUSE                      6
+#define LAYER_ADJUST                     7
 
+#define MACRO_QWERTY                     0
+#define MACRO_COLEMAK                    1
+#define MACRO_DVORAK                     2
+#define MACRO_UPPER                      3
+#define MACRO_LOWER                      4
+#define MACRO_FUNCTION                   5
+#define MACRO_MOUSE                      6
+#define MACRO_TIMBRE_1                   7
+#define MACRO_TIMBRE_2                   8
+#define MACRO_TIMBRE_3                   9
+#define MACRO_TIMBRE_4                  10
+#define MACRO_TEMPO_U                   11
+#define MACRO_TEMPO_D                   12
+#define MACRO_TONE_DEFAULT              13
+#define MACRO_MUSIC_TOGGLE              14
+#define MACRO_AUDIO_TOGGLE              16
+#define MACRO_INC_VOICE                 18
+#define MACRO_DEC_VOICE                 19
+#define MACRO_BACKLIGHT                 20
+#define MACRO_BREATH_TOGGLE             21
+#define MACRO_BREATH_SPEED_INC          23
+#define MACRO_BREATH_SPEED_DEC          24
+#define MACRO_BREATH_DEFAULT            25
+
+#define M_QWRTY             M(MACRO_QWERTY)
+#define M_COLMK             M(MACRO_COLEMAK)
+#define M_DVORK             M(MACRO_DVORAK)
+#define M_UPPER             M(MACRO_UPPER)
+#define M_LOWER             M(MACRO_LOWER)
+#define M_FUNCT             M(MACRO_FUNCTION)
+#define M_MOUSE             M(MACRO_MOUSE)
+#define TIMBR_1             M(MACRO_TIMBRE_1)
+#define TIMBR_2             M(MACRO_TIMBRE_2)
+#define TIMBR_3             M(MACRO_TIMBRE_3)
+#define TIMBR_4             M(MACRO_TIMBRE_4)
+#define TMPO_UP             M(MACRO_TEMPO_U)
+#define TMPO_DN             M(MACRO_TEMPO_D)
+#define TMPO_DF             M(MACRO_TONE_DEFAULT)
+#define M_BACKL             M(MACRO_BACKLIGHT)
+#define M_BRTOG             M(MACRO_BREATH_TOGGLE)
+#define M_BSPDU             M(MACRO_BREATH_SPEED_INC)
+#define M_BSPDD             M(MACRO_BREATH_SPEED_DEC)
+#define M_BDFLT             M(MACRO_BREATH_DEFAULT)
+
+
+#define VC_UP               M(MACRO_INC_VOICE)
+#define VC_DOWN             M(MACRO_DEC_VOICE)
+
+
+#define SC_UNDO             LCTL(KC_Z)
+#define SC_REDO             LCTL(KC_Y)
+#define SC_CUT              LCTL(KC_X)
+#define SC_COPY             LCTL(KC_C)
+#define SC_PSTE             LCTL(KC_V)
+#define SC_SELA             LCTL(KC_A)
+#define SC_SAVE             LCTL(KC_S)
+#define SC_OPEN             LCTL(KC_O)
+#define SC_ACLS             LALT(KC_F4)
+#define SC_CCLS             LCTL(KC_F4)
+
+#define OS_SHFT             KC_FN0
+
+#define _______             KC_TRNS
+#define XXXXXXX             KC_NO
+#define ________________    _______, _______
+#define XXXXXXXXXXXXXXXX    XXXXXXX, XXXXXXX
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-  [0] = KEYMAP( \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, \
-    KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_A,    KC_B,    KC_C,    KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT, \
-    KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12  \
+
+KEYMAP( \
+      KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX,       KC_F1,   KC_F2,   KC_F3,   KC_F4,   XXXXXXX, KC_F5,   KC_F6,   KC_F7,   KC_F8,   XXXXXXX, KC_F9,   KC_F10,  KC_F11,  KC_F12,        KC_PSCR, KC_SLCK, KC_PAUS, \
+      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,       KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_EQL,  KC_BSPC,       KC_INS,  KC_HOME, KC_PGUP, \
+      KC_KP_7, KC_KP_8, KC_KP_9, KC_PPLS,       KC_TAB,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_MINS, KC_BSLS,       KC_DEL,  KC_END,  KC_PGDN, \
+      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,       KC_CAPS, KC_BSPC, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,        XXXXXXX, XXXXXXX, XXXXXXX, \
+      KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT,       KC_LSFT, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT,       XXXXXXX, KC_UP,   XXXXXXX, \
+      KC_KP_0, KC_KP_0, KC_PDOT, KC_PENT,       KC_LCTL, KC_LCTL, XXXXXXX, KC_LALT, KC_LGUI, XXXXXXX, KC_SPC,  KC_SPC,  XXXXXXX, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_RCTL,       KC_LEFT, KC_DOWN, KC_RGHT  \
 )
 
-/*
-      KC_VOLU, KC_MUTE, KC_VOLU, KC_F24,           KC_F20,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12     k119, k11A, k11B, k11C, \
-      KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,          KC_ESC,  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC,       k219, k21A, k21B, k21C, \
-      KC_KP_7, KC_KP_8, KC_KP_9, KC_F23,           KC_F19,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,       k319, k31A, k31B, k31C, \
-      KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS,          KC_F18,  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP,       k419, k41A, k41B, k41C, \
-      KC_KP_1, KC_KP_2, KC_KP_3, KC_F22,           KC_F17,  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN,       k519, k51A, k51B, k51C. \
-      KC_KP_0, KC_F21,  KC_PDOT, KC_PENT,          KC_F16,  KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT,       k619, k61A, k61B, k61C  \
 
-    ) //-----, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------, -------,
+//  [LAYER_QWERTY]       = { // QWERTY
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+
+// /* Numeric Max / Homing Normal - Traditional
+//  * .-----------------------------------.       .-----------------------------------.        .-----------------_-----------------.        .-----------------------------------.       .--------------------------.
+//  * |        |        |        |        |       |        |        |        |        |        |        |        |        |        |        |        |        |        |        |       |        |        |        |
+//  * '-----------------------------------'       '-----------------------------------'        '-----------------------------------'        '-----------------------------------'       '--------------------------'
+//  * .-----------------------------------.       .-----------------------------------------------------------------------------------------------------------------------------.       .--------------------------.
+//  * |        |        |        |        |       | ESC    | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      |        |       |        |        |        |
+//  * |--------+--------+--------+--------|       | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       |--------+--------+--------|
+//  * |        |        |        |        |       | TAB    | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      |        |       |        |        |        |
+//  * |--------+--------+--------+        |   o   | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|       '--------+--------+--------'
+//  * |        |        |        |        |   o   | CAPS   | CAPS   | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      |        |
+//  * |--------+--------+--------+--------|   o   | -------+ -------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---+--------|                .--------.
+//  * |        |        |        |        |       | LSHIFT | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | XXXXXX |        |                |        |
+//  * |--------+--------+--------+        |       | -------+ -------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+--------+--------|       .--------+--------+--------.
+//  * |                 |        |        |       | LCTRL  | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  |        |       |        |        |        |
+//  * '-----------------------------------'       '-----------------------------------------------------------------------------------------------------------------------------'       '--------------------------'
+//  */
+
+
+// /* QWERTY
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | Q      | W      | E      | R      | T      | Y      | U      | I      | O      | P      | [      | ]      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAPS   | A      | S      | D      | F      | G      | H      | J      | K      | L      | ;      | '      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | Z      | X      | C      | V      | B      | N      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_QWERTY]       = { // QWERTY
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+//  /* COLEMAK
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | -      | =      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | Q      | W      | F      | P      | G      | J      | L      | U      | Y      | ;      | [      | ]      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | BACKSP | A      | R      | S      | T      | D      | H      | N      | E      | I      | O      | '      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | Z      | X      | C      | V      | B      | K      | M      | ,      | .      | /      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_COLEMAK]      = { // COLEMAK
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL   },
+//   { KC_BSPC, KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+// },
+
+// /* DVORAK
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | ESC    | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      | [      | ]      | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | TAB    | '      | ,      | .      | P      | Y      | F      | G      | C      | R      | L      | /      | =      | \      | DEL    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAPS   | A      | O      | E      | U      | I      | D      | H      | T      | N      | S      | -      | XXXXXX . ENTER  | PG UP  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * | LSHIFT | ;      | Q      | J      | K      | X      | B      | M      | W      | V      | Z      | XXXXXX . RSHIFT | UP     | PG DN  |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * | LCTRL  | LWIN   | FN     | LALT   | UPPER  | XXXXXX . SPACE  | LOWER  | SHIFT  | RALT   | APP    | RCTRL  | LEFT   | DOWN   | RIGHT  |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_DVORAK]       = { // DVORAK
+//   { KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_LBRC, KC_RBRC, KC_BSPC, KC_BSPC  },
+//   { KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_SLSH, KC_EQL,  KC_BSLS, KC_DEL   },
+//   { KC_CAPS, KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_MINS, KC_ENT,  KC_ENT,  KC_PGUP  },
+//   { KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_RSFT, KC_RSFT, KC_UP,   KC_PGDN  },
+//   { KC_LCTL, KC_LGUI, M_FUNCT, KC_LALT, M_UPPER, KC_SPC,  KC_SPC,  M_LOWER, OS_SHFT, KC_RALT, KC_APP,  KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT  },
+//  },
+
+// /* UPPER
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | PRINT  | BR TOG | BR SP+ | BR SP- | BR RST | XXXXXX | XXXXXX | NUM LK | /      | *      |        | NUM LK | SCR LK | XXXXXX . PAUSE  |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * |        | F1     | F2     | F3     | F4     |        |        | 7      | 8      | 9      | -      |        |        |        | INS    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAP LK | F5     | F6     | F7     | F8     |        |        | 4      | 5      | 6      | +      |        | XXXXXX .        | HOME   |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | F9     | F10    | F11    | F12    |        |        | 1      | 2      | 3      | ENTER  | XXXXXX .        |        | END    |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        | 0               |        | RALT   | .      | ENTER  |        |        |        |        |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_UPPER]        = { // UPPER
+//   { KC_PSCR, M_BRTOG, M_BSPDU, M_BSPDD, M_BDFLT, XXXXXXX, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, XXXXXXX, XXXXXXX, KC_SLCK, KC_PAUS, KC_PAUS  },
+//   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   XXXXXXX, XXXXXXX, KC_KP_7, KC_KP_8, KC_KP_9, KC_PMNS, _______, _______, _______, KC_INS   },
+//   { KC_CAPS, KC_F5,   KC_F6,   KC_F7,   KC_F8,   XXXXXXX, XXXXXXX, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, ________________, KC_HOME  },
+//   { _______, KC_F9,   KC_F10,  KC_F11,  KC_F12,  XXXXXXX, XXXXXXX, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, ________________, _______, KC_END   },
+//   { _______, _______, _______, _______, _______, KC_KP_0, KC_KP_0, _______, KC_RALT, KC_PDOT, KC_PENT, _______, _______, _______, _______  },
+//  },
+
+// /* LOWER
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * |        | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    | F11    | F12    | XXXXXX . BACKSP |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * |        | $      | {      | [      | (      | %      | #      | )      | ]      | }      | @      |        |        |        | INS    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * |        | ^      | *      | +      | -      | /      | \      | _      | '      | "      | `      |        | XXXXXX .        | HOME   |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | |      | &      | !      | ~      | ;      | :      | =      | <      | >      | ?      | XXXXXX .        |        | END    |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        |                 |        |        |        |        |        |        |        |        |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_LOWER]        = { // LOWER
+//   { _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  ________________  },
+//   { _______, KC_DLR,  KC_LCBR, KC_LBRC, KC_LPRN, KC_PERC, KC_HASH, KC_RPRN, KC_RBRC, KC_RCBR, KC_AT,   _______, _______, _______, KC_INS   },
+//   { _______, KC_CIRC, KC_ASTR, KC_PPLS, KC_PMNS, KC_SLSH, KC_BSLS, KC_UNDS, KC_QUOT, KC_DQT,  KC_GRV,  _______, ________________, KC_HOME  },
+//   { _______, KC_PIPE, KC_AMPR, KC_EXLM, KC_TILD, KC_SCLN, KC_COLN, KC_EQL,  KC_LT,   KC_GT,   KC_QUES, ________________, _______, KC_END   },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
+//  },
+
+// /* FUNCTION
+//  * .---------------------------------------------------------------------------------------------------------------------- 2u ------------.
+//  * | NUM LK |        |        |        |        |        |        |        |        |        |        |        |        | XXXXXX .        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+-----------------|
+//  * | SCR LK | F13    | F14    | F15    | F16    |        |        |        |        |        |        |        |        |        |        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ------------+--------|
+//  * | CAP LK | F17    | F18    | F19    | F20    |        |        |        |        |        |        |        | XXXXXX .        |        |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+- 2u ---------------------+--------|
+//  * |        | F21    | F22    | F23    | F24    |        |        |        |        |        |        | XXXXXX .        | VOL UP | MUTE   |
+//  * |--------+--------+--------+--------+--------+- 2u ------------+--------+--------+--------+--------+-----------------+--------+--------|
+//  * |        |        |        |        |        | PLAY/PAUSE      |        |        |        |        |        | PTRACK | VOL DN | NTRACK |
+//  * '--------------------------------------------------------------------------------------------------------------------------------------'
+//  */
+
+//  [LAYER_FUNCTION]     = { // FUNCTION
+//   { KC_NLCK, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+//   { KC_SLCK, KC_F13,  KC_F14,  KC_F15,  KC_F16,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+//   { KC_CAPS, KC_F17,  KC_F18,  KC_F19,  KC_F20,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXX  },
+//   { _______, KC_F21,  KC_F22,  KC_F23,  KC_F24,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_VOLU, KC_MUTE  },
+//   { _______, _______, _______, _______, _______, KC_MPLY, KC_MPLY, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT  },
+//  },
+
+// #ifdef MOUSEKEY_ENABLE
+
+//  [LAYER_MOUSE]        = { // MOUSE
+//   { _______, KC_ACL0, KC_ACL1, KC_ACL2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX  },
+//   { XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX  },
+//   { XXXXXXX, KC_BTN5, KC_BTN4, KC_BTN3, KC_BTN2, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXXXXXXXXXXX, KC_WH_U  },
+//   { _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ________________, KC_MS_U, KC_WH_D  },
+//   { _______, _______, _______, _______, _______, KC_BTN1, KC_BTN1, _______, _______, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R  },
+//  },
+
+// #endif
+
+//  [LAYER_ADJUST]       = { // ADJUST
+//   { _______, TIMBR_1, TIMBR_2, TIMBR_3, TIMBR_4, TMPO_UP, TMPO_DN, TMPO_DF, _______, _______, _______, MU_TOG,  AU_TOG,  ________________  },
+//   { _______, M_QWRTY, M_COLMK, M_DVORK, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______  },
+//   { _______, _______, _______, _______, M_BACKL, RESET,   _______, M_MOUSE, _______, _______, _______, ________________, MUV_IN,  _______  },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, MUV_DE,  _______  },
+//  },
+
+
+// /*
+//  [LAYER_EMPTY]        = { // LAYER
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______  },
+//   { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, ________________, _______, _______  },
+//   { _______, _______, _______, _______, _______, ________________, _______, _______, _______, _______, _______, _______, _______, _______  },
+//  },
+// */
 
-*/
 };
 
-const uint16_t PROGMEM fn_actions[] = {
+#ifdef AUDIO_ENABLE
+
+float tone_my_startup[][2] = SONG(ODE_TO_JOY);
+float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY);
+
+float tone_qwerty[][2]     = SONG(QWERTY_SOUND);
+float tone_dvorak[][2]     = SONG(DVORAK_SOUND);
+float tone_colemak[][2]    = SONG(COLEMAK_SOUND);
 
+float tone_audio_on[][2]   = SONG(CLOSE_ENCOUNTERS_5_NOTE);
+float tone_music_on[][2]   = SONG(DOE_A_DEER);
+float music_scale[][2]     = SONG(MUSIC_SCALE_SOUND);
+
+float tone_caps_on[][2]    = SONG(CAPS_LOCK_ON_SOUND);
+float tone_caps_off[][2]   = SONG(CAPS_LOCK_OFF_SOUND);
+float tone_numlk_on[][2]   = SONG(NUM_LOCK_ON_SOUND);
+float tone_numlk_off[][2]  = SONG(NUM_LOCK_OFF_SOUND);
+float tone_scroll_on[][2]  = SONG(SCROLL_LOCK_ON_SOUND);
+float tone_scroll_off[][2] = SONG(SCROLL_LOCK_OFF_SOUND);
+
+#endif /* AUDIO_ENABLE */
+
+void persistant_default_layer_set(uint16_t default_layer)
+{
+    eeconfig_update_default_layer(default_layer);
+    default_layer_set(default_layer);
+}
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_MODS_ONESHOT(MOD_LSFT),
 };
 
 const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
 {
-  // MACRODOWN only works in this function
-      switch(id) {
-        case 0:
-          if (record->event.pressed) {
-            register_code(KC_RSFT);
-          } else {
-            unregister_code(KC_RSFT);
-          }
-        break;
-      }
+
+    // MACRODOWN only works in this function
+    switch(id)
+    {
+
+        // case MACRO_BREATH_TOGGLE:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_toggle();
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_SPEED_INC:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_speed_inc(1);
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_SPEED_DEC:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_speed_dec(1);
+        //     }
+        //     break;
+
+        // case MACRO_BREATH_DEFAULT:
+        //     if (record->event.pressed)
+        //     {
+        //         breathing_defaults();
+        //     }
+        //     break;
+
+        case MACRO_QWERTY:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_QWERTY);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_qwerty, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_COLEMAK:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_COLEMAK);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_colemak, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_DVORAK:
+            if (record->event.pressed)
+            {
+                persistant_default_layer_set(1UL<<LAYER_DVORAK);
+                #ifdef AUDIO_ENABLE
+                    PLAY_NOTE_ARRAY(tone_dvorak, false, STACCATO);
+                #endif /* AUDIO_ENABLE */
+            }
+            break;
+
+        case MACRO_UPPER:
+            if (record->event.pressed)
+            {
+                layer_on(LAYER_UPPER);
+                // breathing_speed_set(2);
+                // breathing_pulse();
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            else
+            {
+                layer_off(LAYER_UPPER);
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            break;
+
+        case MACRO_LOWER:
+            if (record->event.pressed)
+            {
+                layer_on(LAYER_LOWER);
+                // breathing_speed_set(2);
+                // breathing_pulse();
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            else
+            {
+                layer_off(LAYER_LOWER);
+                update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
+            }
+            break;
+
+        case MACRO_FUNCTION:
+            if (record->event.pressed)
+            {
+                // breathing_speed_set(3);
+                // breathing_enable();
+                layer_on(LAYER_FUNCTION);
+            }
+            else
+            {
+                // breathing_speed_set(1);
+                // breathing_self_disable();
+                layer_off(LAYER_FUNCTION);
+            }
+            break;
+
+#ifdef MOUSEKEY_ENABLE
+
+        case MACRO_MOUSE:
+            if (record->event.pressed)
+            {
+                layer_invert(LAYER_MOUSE);
+            }
+            break;
+
+#endif /* MOUSEKEY_ENABLE */
+
+#ifdef AUDIO_ENABLE
+
+        case MACRO_TIMBRE_1:
+            if (record->event.pressed) set_timbre(TIMBRE_12);
+            break;
+
+        case MACRO_TIMBRE_2:
+            if (record->event.pressed) set_timbre(TIMBRE_25);
+            break;
+
+        case MACRO_TIMBRE_3:
+            if (record->event.pressed) set_timbre(TIMBRE_50);
+            break;
+
+        case MACRO_TIMBRE_4:
+            if (record->event.pressed) set_timbre(TIMBRE_75);
+            break;
+
+        case MACRO_TEMPO_U:
+            if (record->event.pressed) increase_tempo(10);
+            break;
+
+        case MACRO_TEMPO_D:
+            if (record->event.pressed) decrease_tempo(10);
+            break;
+
+        case MACRO_TONE_DEFAULT:
+            if (record->event.pressed)
+            {
+                set_timbre(TIMBRE_DEFAULT);
+                set_tempo(TEMPO_DEFAULT);
+            }
+            break;
+
+/*
+        case MACRO_AUDIO_TOGGLE:
+            if (record->event.pressed)
+            {
+                    if (is_audio_on())
+                    {
+                        audio_off();
+                    }
+                    else
+                    {
+                        audio_on();
+                        PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
+                    }
+            }
+            break;
+
+        case MACRO_MUSIC_TOGGLE:
+            if (record->event.pressed)
+            {
+                    if (IS_LAYER_ON(LAYER_MUSIC))
+                    {
+                        layer_off(LAYER_MUSIC);
+                        stop_all_notes();
+                    }
+                    else
+                    {
+                    PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+                    layer_on(LAYER_MUSIC);
+                    }
+            }
+            break;
+        case MACRO_INC_VOICE:
+            if (record->event.pressed)
+            {
+                #ifdef AUDIO_ENABLE
+                    voice_iterate();
+                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                #endif
+            }
+            break;
+
+        case MACRO_DEC_VOICE:
+            if (record->event.pressed)
+            {
+                #ifdef AUDIO_ENABLE
+                    voice_deiterate();
+                    PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+                #endif
+            }
+            break;
+*/
+
+#endif /* AUDIO_ENABLE */
+
+#ifdef BACKLIGHT_ENABLE
+        case MACRO_BACKLIGHT:
+            if (record->event.pressed)
+            {
+                backlight_step();
+            }
+#endif
+
+        default:
+            break;
+
+    }
     return MACRO_NONE;
 };
 
 
-void matrix_init_user(void) {
+#ifdef AUDIO_ENABLE
+
+void matrix_init_user(void)
+{
+    set_voice(default_voice);
+    startup_user();
+    println("Matrix Init");
+}
+
+void led_set_user(uint8_t usb_led)
+{
+    static uint8_t old_usb_led = 0;
+
+    _delay_ms(10); // gets rid of tick
+
+    if (!is_playing_notes())
+    {
+        if ((usb_led & (1<<USB_LED_CAPS_LOCK)) && !(old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+        {
+                // If CAPS LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_caps_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_CAPS_LOCK)) && (old_usb_led & (1<<USB_LED_CAPS_LOCK)))
+        {
+                // If CAPS LK LED is turning off...
+                PLAY_NOTE_ARRAY(tone_caps_off, false, LEGATO);
+        }
+        else if ((usb_led & (1<<USB_LED_NUM_LOCK)) && !(old_usb_led & (1<<USB_LED_NUM_LOCK)))
+        {
+                // If NUM LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_numlk_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_NUM_LOCK)) && (old_usb_led & (1<<USB_LED_NUM_LOCK)))
+        {
+                // If NUM LED is turning off...
+                PLAY_NOTE_ARRAY(tone_numlk_off, false, LEGATO);
+        }
+        else if ((usb_led & (1<<USB_LED_SCROLL_LOCK)) && !(old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+        {
+                // If SCROLL LK LED is turning on...
+                PLAY_NOTE_ARRAY(tone_scroll_on,  false, LEGATO);
+        }
+        else if (!(usb_led & (1<<USB_LED_SCROLL_LOCK)) && (old_usb_led & (1<<USB_LED_SCROLL_LOCK)))
+        {
+                // If SCROLL LED is turning off...
+                PLAY_NOTE_ARRAY(tone_scroll_off, false, LEGATO);
+        }
+    }
 
+    old_usb_led = usb_led;
 }
 
-void matrix_scan_user(void) {
 
+void startup_user()
+{
+    _delay_ms(10); // gets rid of tick
+    PLAY_NOTE_ARRAY(tone_my_startup, false, STACCATO);
+}
+
+void shutdown_user()
+{
+    PLAY_NOTE_ARRAY(tone_my_goodbye, false, STACCATO);
+    _delay_ms(2000);
+    stop_all_notes();
 }
 
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
+void audio_on_user(void)
+{
+  PLAY_NOTE_ARRAY(tone_audio_on, false, STACCATO);
 }
 
-void led_set_user(uint8_t usb_led) {
+void music_on_user(void)
+{
+  PLAY_NOTE_ARRAY(tone_music_on, false, STACCATO);
+}
+
+void music_scale_user(void)
+{
+  PLAY_NOTE_ARRAY(music_scale, false, STACCATO);
+}
 
-}
\ No newline at end of file
+#endif /* AUDIO_ENABLE */
\ No newline at end of file
-- 
cgit v1.2.3


From 936a26d04ffa12801031c058f27e221174e3fabd Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Thu, 25 Aug 2016 00:15:41 -0500
Subject: Added pin support for A0-A7

Vision Division - It works!
---
 keyboards/vision_division/config.h                 |  2 +-
 keyboards/vision_division/keymaps/default/Makefile |  2 +-
 keyboards/vision_division/keymaps/default/config.h |  6 +++---
 quantum/config_common.h                            | 16 ++++++++--------
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/keyboards/vision_division/config.h b/keyboards/vision_division/config.h
index 37b834973..f50378ffa 100644
--- a/keyboards/vision_division/config.h
+++ b/keyboards/vision_division/config.h
@@ -24,7 +24,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 
 /* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
+#define DIODE_DIRECTION ROW2COL
 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
diff --git a/keyboards/vision_division/keymaps/default/Makefile b/keyboards/vision_division/keymaps/default/Makefile
index 393a9e23a..ecbe7e1ab 100644
--- a/keyboards/vision_division/keymaps/default/Makefile
+++ b/keyboards/vision_division/keymaps/default/Makefile
@@ -10,7 +10,7 @@ COMMAND_ENABLE = yes        # Commands for debug and configuration
 NKRO_ENABLE = yes           # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
 MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
+AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
diff --git a/keyboards/vision_division/keymaps/default/config.h b/keyboards/vision_division/keymaps/default/config.h
index 34eaaff5b..16740fb15 100644
--- a/keyboards/vision_division/keymaps/default/config.h
+++ b/keyboards/vision_division/keymaps/default/config.h
@@ -7,7 +7,7 @@
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      GET_PID(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define PRODUCT_ID      GET_PID(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    IBNobody
 #define PRODUCT         Vision Division
@@ -17,8 +17,8 @@
 #define MATRIX_ROWS 6
 #define MATRIX_ROW_PINS { C2, C3, F4, F5, F6, F7 }
 
-#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
-#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_MAX_TEENSY, NUMERIC_MAX)
+#define MATRIX_COLS GET_MATRIX_COLS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
+#define MATRIX_COL_PINS GET_MATRIX_COL_PINS(NUMERIC_NORMAL, HOMING_MAX_TEENSY)
 
 #define UNUSED_PINS
 
diff --git a/quantum/config_common.h b/quantum/config_common.h
index 7ef4b23d4..8ed5f4a10 100644
--- a/quantum/config_common.h
+++ b/quantum/config_common.h
@@ -45,14 +45,14 @@
 #define F5 0xF5
 #define F6 0xF6
 #define F7 0xF7
-#define A0 0xA0
-#define A1 0xA1
-#define A2 0xA2
-#define A3 0xA3
-#define A4 0xA4
-#define A5 0xA5
-#define A6 0xA6
-#define A7 0xA7
+#define A0 0x00
+#define A1 0x01
+#define A2 0x02
+#define A3 0x03
+#define A4 0x04
+#define A5 0x05
+#define A6 0x06
+#define A7 0x07
 
 
 /* USART configuration */
-- 
cgit v1.2.3


From 34eeea787c8a1c45d5d35221e164e347b7ed65ee Mon Sep 17 00:00:00 2001
From: IBNobody <ibnobody@gmail.com>
Date: Thu, 25 Aug 2016 08:16:18 -0500
Subject: Fixed naming of Analog pins to differentiate them from DIO pins used
 by Quantum Matrix

---
 keyboards/lets_split/pro_micro.h | 64 ++++++++++++++++++++--------------------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h
index 09e219b7b..f9e7ed75d 100644
--- a/keyboards/lets_split/pro_micro.h
+++ b/keyboards/lets_split/pro_micro.h
@@ -111,18 +111,18 @@ static const uint8_t SCK  = 15;
 
 // Mapping of analog pins as digital I/O
 // A6-A11 share with digital pins
-static const uint8_t A0 = 18;
-static const uint8_t A1 = 19;
-static const uint8_t A2 = 20;
-static const uint8_t A3 = 21;
-static const uint8_t A4 = 22;
-static const uint8_t A5 = 23;
-static const uint8_t A6 = 24;   // D4
-static const uint8_t A7 = 25;   // D6
-static const uint8_t A8 = 26;   // D8
-static const uint8_t A9 = 27;   // D9
-static const uint8_t A10 = 28;  // D10
-static const uint8_t A11 = 29;  // D12
+static const uint8_t ADC0 = 18;
+static const uint8_t ADC1 = 19;
+static const uint8_t ADC2 = 20;
+static const uint8_t ADC3 = 21;
+static const uint8_t ADC4 = 22;
+static const uint8_t ADC5 = 23;
+static const uint8_t ADC6 = 24;   // D4
+static const uint8_t ADC7 = 25;   // D6
+static const uint8_t ADC8 = 26;   // D8
+static const uint8_t ADC9 = 27;   // D9
+static const uint8_t ADC10 = 28;  // D10
+static const uint8_t ADC11 = 29;  // D12
 
 #define digitalPinToPCICR(p)    ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0))
 #define digitalPinToPCICRbit(p) 0
@@ -220,26 +220,26 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
     PC, // D5 - PC6
     PD, // D6 - PD7
     PE, // D7 - PE6
-    
+
     PB, // D8 - PB4
     PB, // D9 - PB5
     PB, // D10 - PB6
     PB, // D11 - PB7
     PD, // D12 - PD6
     PC, // D13 - PC7
-    
+
     PB, // D14 - MISO - PB3
     PB, // D15 - SCK - PB1
     PB, // D16 - MOSI - PB2
     PB, // D17 - SS - PB0
-    
+
     PF, // D18 - A0 - PF7
     PF, // D19 - A1 - PF6
     PF, // D20 - A2 - PF5
     PF, // D21 - A3 - PF4
     PF, // D22 - A4 - PF1
     PF, // D23 - A5 - PF0
-    
+
     PD, // D24 - PD5
     PD, // D25 / D6 - A7 - PD7
     PB, // D26 / D8 - A8 - PB4
@@ -257,26 +257,26 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
     _BV(6), // D5 - PC6
     _BV(7), // D6 - PD7
     _BV(6), // D7 - PE6
-    
+
     _BV(4), // D8 - PB4
     _BV(5), // D9 - PB5
     _BV(6), // D10 - PB6
     _BV(7), // D11 - PB7
     _BV(6), // D12 - PD6
     _BV(7), // D13 - PC7
-    
+
     _BV(3), // D14 - MISO - PB3
     _BV(1), // D15 - SCK - PB1
     _BV(2), // D16 - MOSI - PB2
     _BV(0), // D17 - SS - PB0
-    
+
     _BV(7), // D18 - A0 - PF7
     _BV(6), // D19 - A1 - PF6
     _BV(5), // D20 - A2 - PF5
     _BV(4), // D21 - A3 - PF4
     _BV(1), // D22 - A4 - PF1
     _BV(0), // D23 - A5 - PF0
-    
+
     _BV(5), // D24 - PD5
     _BV(7), // D25 / D6 - A7 - PD7
     _BV(4), // D26 / D8 - A8 - PB4
@@ -286,24 +286,24 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = {
 };
 
 const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
-    NOT_ON_TIMER,   
+    NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
     TIMER0B,        /* 3 */
     NOT_ON_TIMER,
     TIMER3A,        /* 5 */
     TIMER4D,        /* 6 */
-    NOT_ON_TIMER,   
-    
-    NOT_ON_TIMER,   
+    NOT_ON_TIMER,
+
+    NOT_ON_TIMER,
     TIMER1A,        /* 9 */
     TIMER1B,        /* 10 */
     TIMER0A,        /* 11 */
-    
-    NOT_ON_TIMER,   
+
+    NOT_ON_TIMER,
     TIMER4A,        /* 13 */
-    
-    NOT_ON_TIMER,   
+
+    NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
     NOT_ON_TIMER,
@@ -324,11 +324,11 @@ const uint8_t PROGMEM digital_pin_to_timer_PGM[] = {
 
 const uint8_t PROGMEM analog_pin_to_channel_PGM[] = {
     7,  // A0               PF7                 ADC7
-    6,  // A1               PF6                 ADC6    
-    5,  // A2               PF5                 ADC5    
+    6,  // A1               PF6                 ADC6
+    5,  // A2               PF5                 ADC5
     4,  // A3               PF4                 ADC4
-    1,  // A4               PF1                 ADC1    
-    0,  // A5               PF0                 ADC0    
+    1,  // A4               PF1                 ADC1
+    0,  // A5               PF0                 ADC0
     8,  // A6       D4      PD4                 ADC8
     10, // A7       D6      PD7                 ADC10
     11, // A8       D8      PB4                 ADC11
-- 
cgit v1.2.3