From fb8d23c60c757d5d9c2270cb0123a53be2049a28 Mon Sep 17 00:00:00 2001 From: tmk Date: Mon, 21 Feb 2011 15:43:17 +0900 Subject: integrate V-USB support into ps2_usb --- Makefile.rules | 11 +- command.c | 4 +- key_process.c | 392 ---------------------------------------- key_process.h | 7 - keyboard.c | 10 +- keymap.h | 18 ++ keymap_skel.h | 21 --- layer.c | 2 +- main_pjrc.c | 97 ++++++++++ matrix.h | 32 ++++ matrix_skel.h | 32 ---- ps2.c | 12 +- ps2_usb/Makefile | 56 ++---- ps2_usb/Makefile.vusb | 84 +++++++++ ps2_usb/README | 15 +- ps2_usb/config.h | 38 ---- ps2_usb/config_pjrc.h | 42 +++++ ps2_usb/config_vusb.h | 116 ++++++++++++ ps2_usb/keymap.c | 9 +- ps2_usb/led.c | 16 ++ ps2_usb/main_vusb.c | 62 +++++++ ps2_usb/matrix.c | 50 +----- ps2_usb/ps2_usart.c | 325 +++++++++++++++++++++++++++++++++ ps2_usb/sendchar_dummy.c | 8 + ps2_usb/sendchar_usart.c | 58 ++++++ ps2_usb/usbconfig.h | 378 +++++++++++++++++++++++++++++++++++++++ ps2_vusb/Makefile | 78 -------- ps2_vusb/README | 12 -- ps2_vusb/config.h | 118 ------------ ps2_vusb/keymap.c | 189 -------------------- ps2_vusb/led.c | 16 -- ps2_vusb/main.c | 62 ------- ps2_vusb/matrix.c | 444 ---------------------------------------------- ps2_vusb/ps2_usart.c | 325 --------------------------------- ps2_vusb/sendchar_dummy.c | 8 - ps2_vusb/sendchar_usart.c | 58 ------ ps2_vusb/usbconfig.h | 378 --------------------------------------- tmk.c | 2 +- 38 files changed, 1289 insertions(+), 2296 deletions(-) delete mode 100644 key_process.c delete mode 100644 key_process.h create mode 100644 keymap.h delete mode 100644 keymap_skel.h create mode 100644 main_pjrc.c create mode 100644 matrix.h delete mode 100644 matrix_skel.h create mode 100644 ps2_usb/Makefile.vusb delete mode 100644 ps2_usb/config.h create mode 100644 ps2_usb/config_pjrc.h create mode 100644 ps2_usb/config_vusb.h create mode 100644 ps2_usb/led.c create mode 100644 ps2_usb/main_vusb.c create mode 100644 ps2_usb/ps2_usart.c create mode 100644 ps2_usb/sendchar_dummy.c create mode 100644 ps2_usb/sendchar_usart.c create mode 100644 ps2_usb/usbconfig.h delete mode 100644 ps2_vusb/Makefile delete mode 100644 ps2_vusb/README delete mode 100644 ps2_vusb/config.h delete mode 100644 ps2_vusb/keymap.c delete mode 100644 ps2_vusb/led.c delete mode 100644 ps2_vusb/main.c delete mode 100644 ps2_vusb/matrix.c delete mode 100644 ps2_vusb/ps2_usart.c delete mode 100644 ps2_vusb/sendchar_dummy.c delete mode 100644 ps2_vusb/sendchar_usart.c delete mode 100644 ps2_vusb/usbconfig.h diff --git a/Makefile.rules b/Makefile.rules index 96d1d7e1e..f1d0a301c 100644 --- a/Makefile.rules +++ b/Makefile.rules @@ -47,7 +47,7 @@ FORMAT = ihex # Object files directory # To put object files in current directory, use a dot (.), do NOT make # this an empty or blank macro! -OBJDIR = obj +OBJDIR = obj_$(TARGET) # Optimization level, can be [0, 1, 2, 3, s]. @@ -121,7 +121,7 @@ CFLAGS += -Wstrict-prototypes CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) CFLAGS += $(CSTANDARD) -CFLAGS += -include config.h +CFLAGS += -include $(CONFIG_H) #---------------- Compiler Options C++ ---------------- @@ -149,7 +149,7 @@ CPPFLAGS += -Wundef CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) #CPPFLAGS += $(CSTANDARD) -CPPFLAGS += -include config.h +CPPFLAGS += -include $(CONFIG_H) #---------------- Assembler Options ---------------- @@ -162,7 +162,7 @@ CPPFLAGS += -include config.h # -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 -ASFLAGS += -include config.h +ASFLAGS += -include $(CONFIG_H) #---------------- Library Options ---------------- @@ -273,7 +273,6 @@ OBJDUMP = avr-objdump SIZE = avr-size AR = avr-ar rcs NM = avr-nm -AVRDUDE = avrdude REMOVE = rm -f REMOVEDIR = rmdir COPY = cp @@ -377,7 +376,7 @@ gccversion : # Program the device. program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + $(PROGRAM_CMD) # Generate avr-gdb config/init file which does the following: diff --git a/command.c b/command.c index a31a4007b..0152ccd87 100644 --- a/command.c +++ b/command.c @@ -8,7 +8,7 @@ #include "util.h" #include "timer.h" #include "layer.h" -#include "matrix_skel.h" +#include "matrix.h" #include "command.h" #ifdef HOST_PJRC @@ -107,6 +107,8 @@ uint8_t command_proc(void) break; #ifdef USB_NKRO_ENABLE case KB_N: + host_clear_keyboard_report(); + host_send_keyboard_report(); keyboard_nkro = !keyboard_nkro; if (keyboard_nkro) print("USB_NKRO: enabled\n"); diff --git a/key_process.c b/key_process.c deleted file mode 100644 index 4367f471d..000000000 --- a/key_process.c +++ /dev/null @@ -1,392 +0,0 @@ -#include -#include -#include -#include -#include "print.h" -#include "debug.h" -#include "timer.h" -#include "util.h" -#include "jump_bootloader.h" -#include "usb_keyboard.h" -#include "usb_keycodes.h" -#include "usb.h" -#include "layer.h" -#include "matrix_skel.h" -#include "keymap_skel.h" -#include "key_process.h" -#ifdef MOUSEKEY_ENABLE -# include "mousekey.h" -#endif -#ifdef PS2_MOUSE_ENABLE -# include "ps2_mouse.h" -#endif -#ifdef USB_EXTRA_ENABLE -# include "usb_extra.h" -#endif -#ifdef USB_MOUSE_ENABLE -# include "usb_mouse.h" -#endif - - -// TODO: refactoring -void proc_matrix(void) { - bool modified = false; - uint8_t fn_bits = 0; - - matrix_scan(); - modified = matrix_is_modified(); - - if (modified) { - if (debug_matrix) matrix_print(); -#ifdef DEBUG_LED - // LED flash for debug - DEBUG_LED_CONFIG; - DEBUG_LED_ON; -#endif - } - - if (matrix_has_ghost()) { - // should send error? - debug("matrix has ghost!!\n"); - return; - } - - usb_keyboard_swap_report(); - usb_keyboard_clear_report(); - for (int row = 0; row < matrix_rows(); row++) { - for (int col = 0; col < matrix_cols(); col++) { - if (!matrix_is_on(row, col)) continue; - - uint8_t code = layer_get_keycode(row, col); - if (code == KB_NO) { - // do nothing - } else if (IS_MOD(code)) { - usb_keyboard_add_mod(code); - } else if (IS_FN(code)) { - fn_bits |= FN_BIT(code); - } -#ifdef MOUSEKEY_ENABLE - else if (IS_MOUSEKEY(code)) { - mousekey_decode(code); - } -#endif -#ifdef USB_EXTRA_ENABLE - // audio control & system control - else if (code == KB_MUTE) { - usb_extra_audio_send(AUDIO_MUTE); - usb_extra_audio_send(0); - _delay_ms(500); - } else if (code == KB_VOLU) { - usb_extra_audio_send(AUDIO_VOL_UP); - usb_extra_audio_send(0); - _delay_ms(200); - } else if (code == KB_VOLD) { - usb_extra_audio_send(AUDIO_VOL_DOWN); - usb_extra_audio_send(0); - _delay_ms(200); - } else if (code == KB_PWR) { - if (suspend && remote_wakeup) { - usb_remote_wakeup(); - } else { - usb_extra_system_send(SYSTEM_POWER_DOWN); - } - _delay_ms(1000); - } -#endif - // normal key - else if (IS_KEY(code)) { - usb_keyboard_add_key(code); - } else { - debug("ignore keycode: "); debug_hex(code); debug("\n"); - } - } - } - - if (modified) { -#ifdef DEBUG_LED - // LED flash for debug - DEBUG_LED_CONFIG; - DEBUG_LED_OFF; -#endif - } - - layer_switching(fn_bits); - - // TODO: clean code - // special mode for control, develop and debug - if (keymap_is_special_mode(fn_bits)) { - switch (usb_keyboard_get_key()) { - case KB_H: // help - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print("b: jump to bootloader\n"); - print("d: toggle debug enable\n"); - print("x: toggle matrix debug\n"); - print("k: toggle keyboard debug\n"); - print("m: toggle mouse debug\n"); - print("p: toggle print enable\n"); - print("v: print version\n"); - print("t: print timer count\n"); - print("s: print status\n"); - print("`: toggle protcol(boot/report)\n"); -#ifdef USB_NKRO_ENABLE - print("n: toggle USB_NKRO\n"); -#endif - print("Backspace: clear matrix\n"); - print("ESC: power down/wake up\n"); - print("0: switch to Layer0 \n"); - print("1: switch to Layer1 \n"); - print("2: switch to Layer2 \n"); - print("3: switch to Layer3 \n"); - print("4: switch to Layer4 \n"); -#ifdef PS2_MOUSE_ENABLE - print("[: ps2_mouse_init \n"); - print("]: ps2_mouse_read \n"); - print("\: ps2_mouse: on/off toggle \n"); -#endif - _delay_ms(500); - print_enable = false; - break; - case KB_BSPC: - usb_keyboard_clear_report(); - usb_keyboard_send(); - matrix_init(); - print("clear matrix\n"); - _delay_ms(500); - break; - case KB_0: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("current_layer: "); phex(current_layer); print("\n"); - print("default_layer: "); phex(default_layer); print("\n"); - current_layer = 0; - default_layer = 0; - print("switch to Layer0 \n"); - _delay_ms(500); - break; - case KB_1: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("current_layer: "); phex(current_layer); print("\n"); - print("default_layer: "); phex(default_layer); print("\n"); - current_layer = 1; - default_layer = 1; - print("switch to Layer1 \n"); - _delay_ms(500); - break; - case KB_2: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("current_layer: "); phex(current_layer); print("\n"); - print("default_layer: "); phex(default_layer); print("\n"); - current_layer = 2; - default_layer = 2; - print("switch to Layer2 \n"); - _delay_ms(500); - break; - case KB_3: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("current_layer: "); phex(current_layer); print("\n"); - print("default_layer: "); phex(default_layer); print("\n"); - current_layer = 3; - default_layer = 3; - print("switch to Layer3 \n"); - _delay_ms(500); - break; - case KB_4: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("current_layer: "); phex(current_layer); print("\n"); - print("default_layer: "); phex(default_layer); print("\n"); - current_layer = 4; - default_layer = 4; - print("switch to Layer4 \n"); - _delay_ms(500); - break; -#ifdef PS2_MOUSE_ENABLE - case KB_LBRC: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print("ps2_mouse_init...\n"); - _delay_ms(500); - ps2_mouse_init(); - break; - case KB_RBRC: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print("ps2_mouse_read[btn x y]: "); - _delay_ms(100); - ps2_mouse_read(); - phex(ps2_mouse_btn); print(" "); - phex(ps2_mouse_x); print(" "); - phex(ps2_mouse_y); print("\n"); - print("ps2_mouse_error_count: "); phex(ps2_mouse_error_count); print("\n"); - break; - case KB_BSLS: - ps2_mouse_enable = !ps2_mouse_enable; - print("ps2_mouse: "); - if (ps2_mouse_enable) - print("on"); - else - print("off"); - print("\n"); - _delay_ms(500); - break; -#endif - case KB_B: // bootloader - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print("jump to bootloader...\n"); - _delay_ms(1000); - jump_bootloader(); // not return - break; - case KB_D: // debug all toggle - usb_keyboard_clear_report(); - usb_keyboard_send(); - debug_enable = !debug_enable; - if (debug_enable) { - print_enable = true; - print("debug enabled.\n"); - //debug_matrix = true; - //debug_keyboard = true; - //debug_mouse = true; - } else { - print("debug disabled.\n"); - print_enable = false; - //debug_matrix = false; - //debug_keyboard = false; - //debug_mouse = false; - } - _delay_ms(1000); - break; - case KB_X: // debug matrix toggle - usb_keyboard_clear_report(); - usb_keyboard_send(); - debug_matrix = !debug_matrix; - if (debug_matrix) - print("debug matrix enabled.\n"); - else - print("debug matrix disabled.\n"); - _delay_ms(1000); - break; - case KB_K: // debug keyboard toggle - usb_keyboard_clear_report(); - usb_keyboard_send(); - debug_keyboard = !debug_keyboard; - if (debug_keyboard) - print("debug keyboard enabled.\n"); - else - print("debug keyboard disabled.\n"); - _delay_ms(1000); - break; - case KB_M: // debug mouse toggle - usb_keyboard_clear_report(); - usb_keyboard_send(); - debug_mouse = !debug_mouse; - if (debug_mouse) - print("debug mouse enabled.\n"); - else - print("debug mouse disabled.\n"); - _delay_ms(1000); - break; - case KB_V: // print version & information - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print(STR(DESCRIPTION) "\n"); - _delay_ms(1000); - break; - case KB_T: // print timer - usb_keyboard_clear_report(); - usb_keyboard_send(); - print_enable = true; - print("timer: "); phex16(timer_count); print("\n"); - _delay_ms(500); - break; - case KB_P: // print toggle - usb_keyboard_clear_report(); - usb_keyboard_send(); - if (print_enable) { - print("print disabled.\n"); - print_enable = false; - } else { - print_enable = true; - print("print enabled.\n"); - } - _delay_ms(1000); - break; - case KB_S: - usb_keyboard_clear_report(); - usb_keyboard_send(); - print("UDCON: "); phex(UDCON); print("\n"); - print("UDIEN: "); phex(UDIEN); print("\n"); - print("UDINT: "); phex(UDINT); print("\n"); - print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n"); - print("usb_keyboard_protocol:"); phex(usb_keyboard_protocol); print("\n"); - print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n"); - print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n"); -#ifdef USB_MOUSE_ENABLE - print("usb_mouse_protocol:"); phex(usb_mouse_protocol); print("\n"); -#endif - if (usb_keyboard_nkro) print("USB_NKRO: enabled\n"); else print("USB_NKRO: disabled\n"); - _delay_ms(500); - break; - case KB_GRV: - usb_keyboard_clear_report(); - usb_keyboard_send(); - usb_keyboard_protocol = !usb_keyboard_protocol; - print("keyboard protcol: "); - if (usb_keyboard_protocol) print("report"); else print("boot"); - print("\n"); - -#ifdef USB_MOUSE_ENABLE - usb_mouse_protocol = !usb_mouse_protocol; - print("mouse protcol: "); - if (usb_mouse_protocol) print("report"); else print("boot"); - print("\n"); -#endif - _delay_ms(1000); - break; -#ifdef USB_NKRO_ENABLE - case KB_N: - usb_keyboard_clear_report(); - usb_keyboard_send(); - usb_keyboard_nkro = !usb_keyboard_nkro; - if (usb_keyboard_nkro) print("USB_NKRO: enabled\n"); else print("USB_NKRO: disabled\n"); - _delay_ms(1000); - break; -#endif -#ifdef USB_EXTRA_ENABLE - case KB_ESC: - usb_keyboard_clear_report(); - usb_keyboard_send(); - if (suspend && remote_wakeup) { - usb_remote_wakeup(); - } else { - usb_extra_system_send(SYSTEM_POWER_DOWN); - } - _delay_ms(1000); - break; -#endif - } - } - - - if (modified) { - usb_keyboard_send(); - } - -#ifdef MOUSEKEY_ENABLE - mousekey_usb_send(); -#endif - -#ifdef PS2_MOUSE_ENABLE - if (ps2_mouse_read() == 0) - ps2_mouse_usb_send(); -#endif -} diff --git a/key_process.h b/key_process.h deleted file mode 100644 index bfc0218f3..000000000 --- a/key_process.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef KEY_PROCESS_H -#define KEY_PROCESS_H 1 - - -void proc_matrix(void); - -#endif diff --git a/keyboard.c b/keyboard.c index 25948ddf7..03db3257a 100644 --- a/keyboard.c +++ b/keyboard.c @@ -1,7 +1,7 @@ #include "keyboard.h" #include "host.h" #include "layer.h" -#include "matrix_skel.h" +#include "matrix.h" #include "led.h" #include "usb_keycodes.h" #include "timer.h" @@ -11,6 +11,11 @@ #ifdef MOUSEKEY_ENABLE #include "mousekey.h" #endif +/* TODO: shoud make new API */ +#ifdef USB_EXTRA_ENABLE +#include "usb_extra.h" +#include +#endif static uint8_t last_leds = 0; @@ -61,7 +66,6 @@ void keyboard_proc(void) fn_bits |= FN_BIT(code); } #ifdef USB_EXTRA_ENABLE -/* TODO: use new API // audio control & system control else if (code == KB_MUTE) { usb_extra_audio_send(AUDIO_MUTE); @@ -83,7 +87,6 @@ void keyboard_proc(void) } _delay_ms(1000); } -*/ #endif else if (IS_KEY(code)) { host_add_key(code); @@ -102,7 +105,6 @@ void keyboard_proc(void) layer_switching(fn_bits); if (command_proc()) { - // not send report return; } diff --git a/keymap.h b/keymap.h new file mode 100644 index 000000000..79ef0359d --- /dev/null +++ b/keymap.h @@ -0,0 +1,18 @@ +#ifndef KEYMAP_H +#define KEYMAP_H + +#include +#include +#include "usb_keycodes.h" + + +/* keycode in specific layer */ +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col); + +/* layer to move during press Fn key */ +uint8_t keymap_fn_layer(uint8_t fn_bits); + +/* keycode to send when release Fn key without using */ +uint8_t keymap_fn_keycode(uint8_t fn_bits); + +#endif diff --git a/keymap_skel.h b/keymap_skel.h deleted file mode 100644 index 300801ff6..000000000 --- a/keymap_skel.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef KEYMAP_SKEL_H -#define KEYMAP_SKEL_H 1 - -#include -#include -#include "usb_keycodes.h" - - -/* keycode in specific layer */ -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col); - -/* layer to move during press Fn key */ -uint8_t keymap_fn_layer(uint8_t fn_bits); - -/* keycode to send when release Fn key without using */ -uint8_t keymap_fn_keycode(uint8_t fn_bits); - -/* whether special key combination */ -bool keymap_is_special_mode(uint8_t fn_bits); - -#endif diff --git a/layer.c b/layer.c index 90314e442..0c59c91fb 100644 --- a/layer.c +++ b/layer.c @@ -1,4 +1,4 @@ -#include "keymap_skel.h" +#include "keymap.h" #include "host.h" #include "debug.h" #include "timer.h" diff --git a/main_pjrc.c b/main_pjrc.c new file mode 100644 index 000000000..18a05ffdf --- /dev/null +++ b/main_pjrc.c @@ -0,0 +1,97 @@ +/* 2010/08/23 noname + * keyboard firmware based on PJRC USB keyboard example + */ +/* Keyboard example with debug channel, for Teensy USB Development Board + * http://www.pjrc.com/teensy/usb_keyboard.html + * Copyright (c) 2008 PJRC.COM, LLC + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include +#include +#include +#include +#include "keyboard.h" +#include "usb.h" +#include "matrix.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "jump_bootloader.h" +#ifdef PS2_MOUSE_ENABLE +# include "ps2_mouse.h" +#endif + + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) + + +bool debug_enable = false; +bool debug_matrix = false; +bool debug_keyboard = false; +bool debug_mouse = false; + + +int main(void) +{ + DEBUG_LED_CONFIG; + DEBUG_LED_OFF; + + // set for 16 MHz clock + CPU_PRESCALE(0); + + // Initialize the USB, and then wait for the host to set configuration. + // If the Teensy is powered without a PC connected to the USB port, + // this will wait forever. + usb_init(); + while (!usb_configured()) /* wait */ ; + + keyboard_init(); + matrix_scan(); + if (matrix_key_count() >= 3) { +#ifdef DEBUG_LED + for (int i = 0; i < 6; i++) { + DEBUG_LED_CONFIG; + DEBUG_LED_ON; + _delay_ms(500); + DEBUG_LED_OFF; + _delay_ms(500); + } +#else + _delay_ms(5000); +#endif + print_enable = true; + debug_enable = true; + debug_matrix = true; + debug_keyboard = true; + debug_mouse = true; + print("debug enabled.\n"); + } + if (matrix_key_count() >= 4) { + print("jump to bootloader...\n"); + _delay_ms(1000); + jump_bootloader(); // not return + } + + + while (1) { + keyboard_proc(); + } +} diff --git a/matrix.h b/matrix.h new file mode 100644 index 000000000..1bcd0915f --- /dev/null +++ b/matrix.h @@ -0,0 +1,32 @@ +#ifndef MATRIX_H +#define MATRIX_H + +#include + +/* number of matrix rows */ +uint8_t matrix_rows(void); +/* number of matrix columns */ +uint8_t matrix_cols(void); +/* intialize matrix for scaning. should be called once. */ +void matrix_init(void); +/* scan all key states on matrix */ +uint8_t matrix_scan(void); +/* whether modified from previous scan. used after matrix_scan. */ +bool matrix_is_modified(void); +/* whether ghosting occur on matrix. */ +bool matrix_has_ghost(void); +/* whether a swtich is on */ +bool matrix_is_on(uint8_t row, uint8_t col); +/* matrix state on row */ +#if (MATRIX_COLS <= 8) +uint8_t matrix_get_row(uint8_t row); +#else +uint16_t matrix_get_row(uint8_t row); +#endif +/* count keys pressed */ +uint8_t matrix_key_count(void); +/* print matrix for debug */ +void matrix_print(void); + + +#endif diff --git a/matrix_skel.h b/matrix_skel.h deleted file mode 100644 index 2379ce44a..000000000 --- a/matrix_skel.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef MATRIX_SKEL_H -#define MATRIX_SKEL_H 1 - -#include - -/* number of matrix rows */ -uint8_t matrix_rows(void); -/* number of matrix columns */ -uint8_t matrix_cols(void); -/* intialize matrix for scaning. should be called once. */ -void matrix_init(void); -/* scan all key states on matrix */ -uint8_t matrix_scan(void); -/* whether modified from previous scan. used after matrix_scan. */ -bool matrix_is_modified(void); -/* whether ghosting occur on matrix. */ -bool matrix_has_ghost(void); -/* whether a swtich is on */ -bool matrix_is_on(uint8_t row, uint8_t col); -/* matrix state on row */ -#if (MATRIX_COLS <= 8) -uint8_t matrix_get_row(uint8_t row); -#else -uint16_t matrix_get_row(uint8_t row); -#endif -/* count keys pressed */ -uint8_t matrix_key_count(void); -/* print matrix for debug */ -void matrix_print(void); - - -#endif diff --git a/ps2.c b/ps2.c index 52ee1691f..99749cf6b 100644 --- a/ps2.c +++ b/ps2.c @@ -187,6 +187,9 @@ static inline void pbuf_enqueue(uint8_t data) { if (!data) return; + + uint8_t sreg = SREG; + cli(); uint8_t next = (pbuf_head + 1) % PBUF_SIZE; if (next != pbuf_tail) { pbuf[pbuf_head] = data; @@ -194,10 +197,12 @@ static inline void pbuf_enqueue(uint8_t data) } else { debug("pbuf: full\n"); } + SREG = sreg; } static inline uint8_t pbuf_dequeue(void) { uint8_t val = 0; + uint8_t sreg = SREG; cli(); if (pbuf_head != pbuf_tail) { @@ -205,17 +210,20 @@ static inline uint8_t pbuf_dequeue(void) pbuf_tail = (pbuf_tail + 1) % PBUF_SIZE; } SREG = sreg; + return val; } /* get data received by interrupt */ uint8_t ps2_host_recv(void) { - // TODO: release clock line after 100us when inhibited by error if (ps2_error) { + print("x"); + phex(ps2_error); ps2_host_send(0xFE); // request to resend ps2_error = PS2_ERR_NONE; } + idle(); return pbuf_dequeue(); } @@ -281,7 +289,7 @@ ISR(PS2_INT_VECT) } goto RETURN; ERROR: - DEBUGP(0xFF); + DEBUGP(0x0F); inhibit(); ps2_error = state; DONE: diff --git a/ps2_usb/Makefile b/ps2_usb/Makefile index bd9a76eb8..af73be2c9 100644 --- a/ps2_usb/Makefile +++ b/ps2_usb/Makefile @@ -1,46 +1,5 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - # Target file name (without extension). -TARGET = tmk_ps2_usb +TARGET = ps2_usb # Directory common source filess exist COMMON_DIR = .. @@ -49,10 +8,14 @@ COMMON_DIR = .. TARGET_DIR = . # keyboard dependent files -TARGET_SRC = keymap.c \ +TARGET_SRC = main_pjrc.c \ + keymap.c \ matrix.c \ + led.c \ ps2.c +CONFIG_H = config_pjrc.h + # MCU name, you MUST set this to match the board you are using # type "make clean" after changing this, so all files will be rebuilt @@ -78,4 +41,11 @@ USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System c USB_NKRO_ENABLE = yes # USB Nkey Rollover + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex + + + +include $(COMMON_DIR)/Makefile.pjrc include $(COMMON_DIR)/Makefile.common diff --git a/ps2_usb/Makefile.vusb b/ps2_usb/Makefile.vusb new file mode 100644 index 000000000..7b69dc27b --- /dev/null +++ b/ps2_usb/Makefile.vusb @@ -0,0 +1,84 @@ +# Target file name (without extension). +TARGET = ps2_vusb + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +TARGET_SRC = main_vusb.c \ + keymap.c \ + matrix.c \ + led.c \ + ps2_usart.c \ + sendchar_dummy.c +# sendchar_usart.c + +CONFIG_H = config_vusb.h + + +OPT_DEFS = -DDEBUG_LEVEL=0 + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +#MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 +MCU = atmega168 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 20000000 + + +# Build Options +# comment out to disable the options. +# +MOUSEKEY_ENABLE = yes # Mouse keys +#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) +#USB_NKRO_ENABLE = yes # USB Nkey Rollover + + + +#---------------- Programming Options -------------------------- +AVRDUDE = avrdude +# Type: avrdude -c ? to get a full listing. +AVRDUDE_PROGRAMMER = usbasp +AVRDUDE_PORT = +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + +PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + + +include $(COMMON_DIR)/Makefile.vusb +include $(COMMON_DIR)/Makefile.common diff --git a/ps2_usb/README b/ps2_usb/README index 3c9eb1428..ad5c6c431 100644 --- a/ps2_usb/README +++ b/ps2_usb/README @@ -47,10 +47,10 @@ Keymap customization You can customize keymaps easily by editing source code. -Build ------ +Build for Teensy +---------------- 0. Connect PS/2 keyboard to Teensy by 4 lines(Vcc, GND, Data, Clock). -1. Define following macros for PS/2 connection in config.h: +1. Define following macros for PS/2 connection in config_pjrc.h: PS2_DATA_PORT PS2_DATA_PIN PS2_DATA_DDR @@ -65,6 +65,15 @@ Build http://www.pjrc.com/teensy/loader.html +Build for V-USB +--------------- +0. Build V-USB controller board and connect PS/2 keyboard. +1. Define macros in config_vusb.h if needed. +2. Edit Makefile.vusb for build options and MCU setting. +3. make -f Makefile.vusb +4. program your V-USB controller. + + Keymap ------ You can change a keymap by editing code of keymap.c like following. diff --git a/ps2_usb/config.h b/ps2_usb/config.h deleted file mode 100644 index be96f004a..000000000 --- a/ps2_usb/config.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - -/* controller configuration */ -#include "controller_teensy.h" - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6512 -#define MANUFACTURER t.m.k. -#define PRODUCT PS/2 keyboard converter -#define DESCRIPTION convert PS/2 keyboard to USB - -/* matrix size */ -#define MATRIX_ROWS 32 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 -/* define if matrix has ghost */ -//#define MATRIX_HAS_GHOST - -/* USB NKey Rollover */ -#ifdef USB_NKRO_ENABLE -#endif - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - -/* PS/2 mouse */ -#define PS2_CLOCK_PORT PORTF -#define PS2_CLOCK_PIN PINF -#define PS2_CLOCK_DDR DDRF -#define PS2_CLOCK_BIT 0 -#define PS2_DATA_PORT PORTF -#define PS2_DATA_PIN PINF -#define PS2_DATA_DDR DDRF -#define PS2_DATA_BIT 1 - -#endif diff --git a/ps2_usb/config_pjrc.h b/ps2_usb/config_pjrc.h new file mode 100644 index 000000000..6205c4801 --- /dev/null +++ b/ps2_usb/config_pjrc.h @@ -0,0 +1,42 @@ +#ifndef CONFIG_H +#define CONFIG_H + +/* controller configuration */ +#include "controller_teensy.h" + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6512 +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2 keyboard converter +#define DESCRIPTION convert PS/2 keyboard to USB + + +/* matrix size */ +#define MATRIX_ROWS 32 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \ + keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \ +) + + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + + +/* PS/2 lines */ +#define PS2_CLOCK_PORT PORTF +#define PS2_CLOCK_PIN PINF +#define PS2_CLOCK_DDR DDRF +#define PS2_CLOCK_BIT 0 +#define PS2_DATA_PORT PORTF +#define PS2_DATA_PIN PINF +#define PS2_DATA_DDR DDRF +#define PS2_DATA_BIT 1 + +#endif diff --git a/ps2_usb/config_vusb.h b/ps2_usb/config_vusb.h new file mode 100644 index 000000000..0463f68ba --- /dev/null +++ b/ps2_usb/config_vusb.h @@ -0,0 +1,116 @@ +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x2233 +// TODO: share these strings with usbconfig.h +// Edit usbconfig.h to change these. +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2 keyboard converter +#define DESCRIPTION convert PS/2 keyboard to USB + + +/* matrix size */ +#define MATRIX_ROWS 32 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \ + keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \ +) + + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + + +/* PS/2 lines */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 4 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 + + +// Synchronous USART is used to receive data from keyboard. +// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. +// NOTE: This is recomended strongly if you use V-USB library. +#define PS2_USE_USART + +// External or Pin Change Interrupt is used to receive data from keyboard. +// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. +//#define PS2_USE_INT + + +#ifdef PS2_USE_USART +// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge +// set DDR of CLOCK as input to be slave +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1< #include #include -#include "usb_keyboard.h" #include "usb_keycodes.h" #include "print.h" #include "debug.h" #include "util.h" -#include "keymap_skel.h" +#include "keymap.h" #define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) @@ -181,9 +180,3 @@ uint8_t keymap_fn_keycode(uint8_t fn_bits) { return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); } - -// define a condition to enter special function mode -bool keymap_is_special_mode(uint8_t fn_bits) -{ - return usb_keyboard_mods == (BIT_LSHIFT | BIT_RSHIFT) || usb_keyboard_mods == (BIT_LCTRL | BIT_RSHIFT); -} diff --git a/ps2_usb/led.c b/ps2_usb/led.c new file mode 100644 index 000000000..d69b1c675 --- /dev/null +++ b/ps2_usb/led.c @@ -0,0 +1,16 @@ +#include "stdint.h" +#include "ps2.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + uint8_t ps2_led = 0; + if (usb_led & (1< +#include +#include +#include +#include "usbdrv.h" +#include "oddebug.h" +#include "host_vusb.h" +#include "keyboard.h" + + +#if 0 +#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0) +#define DEBUGP(x) do { PORTC = x; } while (0) +#else +#define DEBUGP_INIT() +#define DEBUGP(x) +#endif + + +int main(void) +{ + DEBUGP_INIT(); + wdt_enable(WDTO_1S); + odDebugInit(); + usbInit(); + + /* enforce re-enumeration, do this while interrupts are disabled! */ + usbDeviceDisconnect(); + uint8_t i = 0; + /* fake USB disconnect for > 250 ms */ + while(--i){ + wdt_reset(); + _delay_ms(1); + } + usbDeviceConnect(); + + keyboard_init(); + + sei(); + while (1) { + DEBUGP(0x1); + wdt_reset(); + usbPoll(); + DEBUGP(0x2); + keyboard_proc(); + DEBUGP(0x3); + host_vusb_keyboard_send(); + } +} diff --git a/ps2_usb/matrix.c b/ps2_usb/matrix.c index aaf89719e..52479d975 100644 --- a/ps2_usb/matrix.c +++ b/ps2_usb/matrix.c @@ -9,8 +9,7 @@ #include "util.h" #include "debug.h" #include "ps2.h" -#include "usb_keyboard.h" -#include "matrix_skel.h" +#include "matrix.h" #if (MATRIX_COLS > 16) @@ -60,8 +59,6 @@ static bool matrix_has_ghost_in_row(uint8_t row); #endif static void matrix_make(uint8_t code); static void matrix_break(uint8_t code); -static void ps2_reset(void); -static void ps2_set_leds(uint8_t leds); inline @@ -78,20 +75,8 @@ uint8_t matrix_cols(void) void matrix_init(void) { - print_enable = true; ps2_host_init(); - ps2_reset(); - - // flush LEDs - ps2_set_leds(1< + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ +/* +Primitive PS/2 Library for AVR +============================== +Host side is only supported now. +Synchronous USART is used to receive data by hardware process +rather than interrupt. During V-USB interrupt runs, CLOCK interrupt +cannot interpose. In the result it is prone to lost CLOCK edge. + + +I/O control +----------- +High state is asserted by internal pull-up. +If you have a signaling problem, you may need to have +external pull-up resisters on CLOCK and DATA line. + + +PS/2 References +--------------- +http://www.computer-engineering.org/ps2protocol/ +http://www.mcamafia.de/pdf/ibm_hitrc07.pdf +*/ +#include +#include +#include +#include +#include "ps2.h" +#include "debug.h" + + +#if 0 +#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0) +#define DEBUGP(x) do { PORTC = x; } while (0) +#else +#define DEBUGP_INIT() +#define DEBUGP(x) +#endif + +#define WAIT(stat, us, err) do { \ + if (!wait_##stat(us)) { \ + ps2_error = err; \ + goto ERROR; \ + } \ +} while (0) + + +uint8_t ps2_error = PS2_ERR_NONE; + + +static inline void clock_lo(void); +static inline void clock_hi(void); +static inline bool clock_in(void); +static inline void data_lo(void); +static inline void data_hi(void); +static inline bool data_in(void); +static inline uint16_t wait_clock_lo(uint16_t us); +static inline uint16_t wait_clock_hi(uint16_t us); +static inline uint16_t wait_data_lo(uint16_t us); +static inline uint16_t wait_data_hi(uint16_t us); +static inline void idle(void); +static inline void inhibit(void); +#if defined PS2_USE_INT || defined PS2_USE_USART +static inline uint8_t pbuf_dequeue(void); +static inline void pbuf_enqueue(uint8_t data); +#endif + + +void ps2_host_init(void) +{ + DEBUGP_INIT(); + DEBUGP(0x1); + idle(); + PS2_USART_INIT(); + PS2_USART_RX_INT_ON(); +} + +uint8_t ps2_host_send(uint8_t data) +{ + uint8_t res = 0; + bool parity = true; + ps2_error = PS2_ERR_NONE; + + DEBUGP(0x6); + PS2_USART_OFF(); + + /* terminate a transmission if we have */ + inhibit(); + _delay_us(100); + + /* start bit [1] */ + data_lo(); + clock_hi(); + WAIT(clock_lo, 15000, 1); + /* data [2-9] */ + for (uint8_t i = 0; i < 8; i++) { + _delay_us(15); + if (data&(1<>2); + } else { + pbuf_enqueue(data); + } + DEBUGP(0x8); +} + +/* send LED state to keyboard */ +void ps2_host_set_led(uint8_t led) +{ + // send 0xED then keyboard keeps waiting for next LED data + // and keyboard does not send any scan codes during waiting. + // If fail to send LED data keyboard looks like being freezed. + uint8_t retry = 3; + while (retry-- && ps2_host_send(PS2_SET_LED) != PS2_ACK) + ; + retry = 3; + while (retry-- && ps2_host_send(led) != PS2_ACK) + ; +} + + +/*-------------------------------------------------------------------- + * static functions + *------------------------------------------------------------------*/ +static inline void clock_lo() +{ + PS2_CLOCK_PORT &= ~(1< +#include "sendchar.h" + + +int8_t sendchar(uint8_t c) +{ + return 1; +} diff --git a/ps2_usb/sendchar_usart.c b/ps2_usb/sendchar_usart.c new file mode 100644 index 000000000..fe18177a3 --- /dev/null +++ b/ps2_usb/sendchar_usart.c @@ -0,0 +1,58 @@ +#include +#include "oddebug.h" +#include "sendchar.h" + + +/* from oddebug.h */ +#if defined UBRR +# define ODDBG_UBRR UBRR +#elif defined UBRRL +# define ODDBG_UBRR UBRRL +#elif defined UBRR0 +# define ODDBG_UBRR UBRR0 +#elif defined UBRR0L +# define ODDBG_UBRR UBRR0L +#endif + +#if defined UCR +# define ODDBG_UCR UCR +#elif defined UCSRB +# define ODDBG_UCR UCSRB +#elif defined UCSR0B +# define ODDBG_UCR UCSR0B +#endif + +#if defined TXEN +# define ODDBG_TXEN TXEN +#else +# define ODDBG_TXEN TXEN0 +#endif + +#if defined USR +# define ODDBG_USR USR +#elif defined UCSRA +# define ODDBG_USR UCSRA +#elif defined UCSR0A +# define ODDBG_USR UCSR0A +#endif + +#if defined UDRE +# define ODDBG_UDRE UDRE +#else +# define ODDBG_UDRE UDRE0 +#endif + +#if defined UDR +# define ODDBG_UDR UDR +#elif defined UDR0 +# define ODDBG_UDR UDR0 +#endif + + +/* from oddebug.c */ +int8_t sendchar(uint8_t c) +{ + while(!(ODDBG_USR & (1 << ODDBG_UDRE))); /* wait for data register empty */ + ODDBG_UDR = c; + return 1; +} diff --git a/ps2_usb/usbconfig.h b/ps2_usb/usbconfig.h new file mode 100644 index 000000000..9038f1eb8 --- /dev/null +++ b/ps2_usb/usbconfig.h @@ -0,0 +1,378 @@ +/* Name: usbconfig.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2005-04-01 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ + */ + +#ifndef __usbconfig_h_included__ +#define __usbconfig_h_included__ + +#include "config_vusb.h" + +/* +General Description: +This file is an example configuration (with inline documentation) for the USB +driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is +also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may +wire the lines to any other port, as long as D+ is also wired to INT0 (or any +other hardware interrupt, as long as it is the highest level interrupt, see +section at the end of this file). +*/ + +/* ---------------------------- Hardware Config ---------------------------- */ + +#define USB_CFG_IOPORTNAME D +/* This is the port where the USB bus is connected. When you configure it to + * "B", the registers PORTB, PINB and DDRB will be used. + */ +#define USB_CFG_DMINUS_BIT 3 +/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. + * This may be any bit in the port. + */ +#define USB_CFG_DPLUS_BIT 2 +/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. + * This may be any bit in the port. Please note that D+ must also be connected + * to interrupt pin INT0! [You can also use other interrupts, see section + * "Optional MCU Description" below, or you can connect D- to the interrupt, as + * it is required if you use the USB_COUNT_SOF feature. If you use D- for the + * interrupt, the USB interrupt will also be triggered at Start-Of-Frame + * markers every millisecond.] + */ +#define USB_CFG_CLOCK_KHZ (F_CPU/1000) +/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, + * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code + * require no crystal, they tolerate +/- 1% deviation from the nominal + * frequency. All other rates require a precision of 2000 ppm and thus a + * crystal! + * Since F_CPU should be defined to your actual clock rate anyway, you should + * not need to modify this setting. + */ +#define USB_CFG_CHECK_CRC 0 +/* Define this to 1 if you want that the driver checks integrity of incoming + * data packets (CRC checks). CRC checks cost quite a bit of code size and are + * currently only available for 18 MHz crystal clock. You must choose + * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. + */ + +/* ----------------------- Optional Hardware Config ------------------------ */ + +/* #define USB_CFG_PULLUP_IOPORTNAME D */ +/* If you connect the 1.5k pullup resistor from D- to a port pin instead of + * V+, you can connect and disconnect the device from firmware by calling + * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). + * This constant defines the port on which the pullup resistor is connected. + */ +/* #define USB_CFG_PULLUP_BIT 4 */ +/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined + * above) where the 1.5k pullup resistor is connected. See description + * above for details. + */ + +/* --------------------------- Functional Range ---------------------------- */ + +#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 +/* Define this to 1 if you want to compile a version with two endpoints: The + * default control endpoint 0 and an interrupt-in endpoint (any other endpoint + * number). + */ +#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 +/* Define this to 1 if you want to compile a version with three endpoints: The + * default control endpoint 0, an interrupt-in endpoint 3 (or the number + * configured below) and a catch-all default interrupt-in endpoint as above. + * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. + */ +#define USB_CFG_EP3_NUMBER 3 +/* If the so-called endpoint 3 is used, it can now be configured to any other + * endpoint number (except 0) with this macro. Default if undefined is 3. + */ +/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ +/* The above macro defines the startup condition for data toggling on the + * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. + * Since the token is toggled BEFORE sending any data, the first packet is + * sent with the oposite value of this configuration! + */ +#define USB_CFG_IMPLEMENT_HALT 0 +/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature + * for endpoint 1 (interrupt endpoint). Although you may not need this feature, + * it is required by the standard. We have made it a config option because it + * bloats the code considerably. + */ +#define USB_CFG_SUPPRESS_INTR_CODE 0 +/* Define this to 1 if you want to declare interrupt-in endpoints, but don't + * want to send any data over them. If this macro is defined to 1, functions + * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if + * you need the interrupt-in endpoints in order to comply to an interface + * (e.g. HID), but never want to send any data. This option saves a couple + * of bytes in flash memory and the transmit buffers in RAM. + */ +#define USB_CFG_INTR_POLL_INTERVAL 10 +/* If you compile a version with endpoint 1 (interrupt-in), this is the poll + * interval. The value is in milliseconds and must not be less than 10 ms for + * low speed devices. + */ +#define USB_CFG_IS_SELF_POWERED 0 +/* Define this to 1 if the device has its own power supply. Set it to 0 if the + * device is powered from the USB bus. + */ +#define USB_CFG_MAX_BUS_POWER 100 +/* Set this variable to the maximum USB bus power consumption of your device. + * The value is in milliamperes. [It will be divided by two since USB + * communicates power requirements in units of 2 mA.] + */ +#define USB_CFG_IMPLEMENT_FN_WRITE 1 +/* Set this to 1 if you want usbFunctionWrite() to be called for control-out + * transfers. Set it to 0 if you don't need it and want to save a couple of + * bytes. + */ +#define USB_CFG_IMPLEMENT_FN_READ 0 +/* Set this to 1 if you need to send control replies which are generated + * "on the fly" when usbFunctionRead() is called. If you only want to send + * data from a static buffer, set it to 0 and return the data from + * usbFunctionSetup(). This saves a couple of bytes. + */ +#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 +/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. + * You must implement the function usbFunctionWriteOut() which receives all + * interrupt/bulk data sent to any endpoint other than 0. The endpoint number + * can be found in 'usbRxToken'. + */ +#define USB_CFG_HAVE_FLOWCONTROL 0 +/* Define this to 1 if you want flowcontrol over USB data. See the definition + * of the macros usbDisableAllRequests() and usbEnableAllRequests() in + * usbdrv.h. + */ +#define USB_CFG_DRIVER_FLASH_PAGE 0 +/* If the device has more than 64 kBytes of flash, define this to the 64 k page + * where the driver's constants (descriptors) are located. Or in other words: + * Define this to 1 for boot loaders on the ATMega128. + */ +#define USB_CFG_LONG_TRANSFERS 0 +/* Define this to 1 if you want to send/receive blocks of more than 254 bytes + * in a single control-in or control-out transfer. Note that the capability + * for long transfers increases the driver size. + */ +/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ +/* This macro is a hook if you want to do unconventional things. If it is + * defined, it's inserted at the beginning of received message processing. + * If you eat the received message and don't want default processing to + * proceed, do a return after doing your things. One possible application + * (besides debugging) is to flash a status LED on each packet. + */ +/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ +/* This macro is a hook if you need to know when an USB RESET occurs. It has + * one parameter which distinguishes between the start of RESET state and its + * end. + */ +/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ +/* This macro (if defined) is executed when a USB SET_ADDRESS request was + * received. + */ +#define USB_COUNT_SOF 0 +/* define this macro to 1 if you need the global variable "usbSofCount" which + * counts SOF packets. This feature requires that the hardware interrupt is + * connected to D- instead of D+. + */ +/* #ifdef __ASSEMBLER__ + * macro myAssemblerMacro + * in YL, TCNT0 + * sts timer0Snapshot, YL + * endm + * #endif + * #define USB_SOF_HOOK myAssemblerMacro + * This macro (if defined) is executed in the assembler module when a + * Start Of Frame condition is detected. It is recommended to define it to + * the name of an assembler macro which is defined here as well so that more + * than one assembler instruction can be used. The macro may use the register + * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages + * immediately after an SOF pulse may be lost and must be retried by the host. + * What can you do with this hook? Since the SOF signal occurs exactly every + * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in + * designs running on the internal RC oscillator. + * Please note that Start Of Frame detection works only if D- is wired to the + * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! + */ +#define USB_CFG_CHECK_DATA_TOGGLING 0 +/* define this macro to 1 if you want to filter out duplicate data packets + * sent by the host. Duplicates occur only as a consequence of communication + * errors, when the host does not receive an ACK. Please note that you need to + * implement the filtering yourself in usbFunctionWriteOut() and + * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable + * for each control- and out-endpoint to check for duplicate packets. + */ +#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 +/* define this macro to 1 if you want the function usbMeasureFrameLength() + * compiled in. This function can be used to calibrate the AVR's RC oscillator. + */ +#define USB_USE_FAST_CRC 0 +/* The assembler module has two implementations for the CRC algorithm. One is + * faster, the other is smaller. This CRC routine is only used for transmitted + * messages where timing is not critical. The faster routine needs 31 cycles + * per byte while the smaller one needs 61 to 69 cycles. The faster routine + * may be worth the 32 bytes bigger code size if you transmit lots of data and + * run the AVR close to its limit. + */ + +/* -------------------------- Device Description --------------------------- */ + +#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) +/* USB vendor ID for the device, low byte first. If you have registered your + * own Vendor ID, define it here. Otherwise you may use one of obdev's free + * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) +/* This is the ID of the product, low byte first. It is interpreted in the + * scope of the vendor ID. If you have registered your own VID with usb.org + * or if you have licensed a PID from somebody else, define it here. Otherwise + * you may use one of obdev's free shared VID/PID pairs. See the file + * USB-IDs-for-free.txt for details! + * *** IMPORTANT NOTE *** + * This template uses obdev's shared VID/PID pair for Vendor Class devices + * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand + * the implications! + */ +#define USB_CFG_DEVICE_VERSION 0x00, 0x01 +/* Version number of the device: Minor number first, then major number. + */ +#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.' +#define USB_CFG_VENDOR_NAME_LEN 6 +/* These two values define the vendor name returned by the USB device. The name + * must be given as a list of characters under single quotes. The characters + * are interpreted as Unicode (UTF-16) entities. + * If you don't want a vendor name string, undefine these macros. + * ALWAYS define a vendor name containing your Internet domain name if you use + * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for + * details. + */ +#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r' +#define USB_CFG_DEVICE_NAME_LEN 23 +/* Same as above for the device name. If you don't want a device name, undefine + * the macros. See the file USB-IDs-for-free.txt before you assign a name if + * you use a shared VID/PID. + */ +/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ +/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ +/* Same as above for the serial number. If you don't want a serial number, + * undefine the macros. + * It may be useful to provide the serial number through other means than at + * compile time. See the section about descriptor properties below for how + * to fine tune control over USB descriptors such as the string descriptor + * for the serial number. + */ +#define USB_CFG_DEVICE_CLASS 0 +#define USB_CFG_DEVICE_SUBCLASS 0 +/* See USB specification if you want to conform to an existing device class. + * Class 0xff is "vendor specific". + */ +#define USB_CFG_INTERFACE_CLASS 3 /* HID */ +#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ +#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ +/* See USB specification if you want to conform to an existing device class or + * protocol. The following classes must be set at interface level: + * HID class is 3, no subclass and protocol required (but may be useful!) + * CDC class is 2, use subclass 2 and protocol 1 for ACM + */ +#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 +/* Define this to the length of the HID report descriptor, if you implement + * an HID device. Otherwise don't define it or define it to 0. + * If you use this define, you must add a PROGMEM character array named + * "usbHidReportDescriptor" to your code which contains the report descriptor. + * Don't forget to keep the array and this define in sync! + */ + +/* #define USB_PUBLIC static */ +/* Use the define above if you #include usbdrv.c instead of linking against it. + * This technique saves a couple of bytes in flash memory. + */ + +/* ------------------- Fine Control over USB Descriptors ------------------- */ +/* If you don't want to use the driver's default USB descriptors, you can + * provide our own. These can be provided as (1) fixed length static data in + * flash memory, (2) fixed length static data in RAM or (3) dynamically at + * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more + * information about this function. + * Descriptor handling is configured through the descriptor's properties. If + * no properties are defined or if they are 0, the default descriptor is used. + * Possible properties are: + * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched + * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is + * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if + * you want RAM pointers. + * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found + * in static memory is in RAM, not in flash memory. + * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), + * the driver must know the descriptor's length. The descriptor itself is + * found at the address of a well known identifier (see below). + * List of static descriptor names (must be declared PROGMEM if in flash): + * char usbDescriptorDevice[]; + * char usbDescriptorConfiguration[]; + * char usbDescriptorHidReport[]; + * char usbDescriptorString0[]; + * int usbDescriptorStringVendor[]; + * int usbDescriptorStringDevice[]; + * int usbDescriptorStringSerialNumber[]; + * Other descriptors can't be provided statically, they must be provided + * dynamically at runtime. + * + * Descriptor properties are or-ed or added together, e.g.: + * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) + * + * The following descriptors are defined: + * USB_CFG_DESCR_PROPS_DEVICE + * USB_CFG_DESCR_PROPS_CONFIGURATION + * USB_CFG_DESCR_PROPS_STRINGS + * USB_CFG_DESCR_PROPS_STRING_0 + * USB_CFG_DESCR_PROPS_STRING_VENDOR + * USB_CFG_DESCR_PROPS_STRING_PRODUCT + * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER + * USB_CFG_DESCR_PROPS_HID + * USB_CFG_DESCR_PROPS_HID_REPORT + * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) + * + * Note about string descriptors: String descriptors are not just strings, they + * are Unicode strings prefixed with a 2 byte header. Example: + * int serialNumberDescriptor[] = { + * USB_STRING_DESCRIPTOR_HEADER(6), + * 'S', 'e', 'r', 'i', 'a', 'l' + * }; + */ + +#define USB_CFG_DESCR_PROPS_DEVICE 0 +#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 +#define USB_CFG_DESCR_PROPS_STRINGS 0 +#define USB_CFG_DESCR_PROPS_STRING_0 0 +#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 +#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 +#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 +//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC +#define USB_CFG_DESCR_PROPS_HID 0 +#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC +//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 +#define USB_CFG_DESCR_PROPS_UNKNOWN 0 + +/* ----------------------- Optional MCU Description ------------------------ */ + +/* The following configurations have working defaults in usbdrv.h. You + * usually don't need to set them explicitly. Only if you want to run + * the driver on a device which is not yet supported or with a compiler + * which is not fully supported (such as IAR C) or if you use a differnt + * interrupt than INT0, you may have to define some of these. + */ +/* #define USB_INTR_CFG MCUCR */ +/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ +/* #define USB_INTR_CFG_CLR 0 */ +/* #define USB_INTR_ENABLE GIMSK */ +/* #define USB_INTR_ENABLE_BIT INT0 */ +/* #define USB_INTR_PENDING GIFR */ +/* #define USB_INTR_PENDING_BIT INTF0 */ +/* #define USB_INTR_VECTOR INT0_vect */ + +#endif /* __usbconfig_h_included__ */ diff --git a/ps2_vusb/Makefile b/ps2_vusb/Makefile deleted file mode 100644 index 6901d1f5c..000000000 --- a/ps2_vusb/Makefile +++ /dev/null @@ -1,78 +0,0 @@ -# Target file name (without extension). -TARGET = ps2_vusb - -# Directory common source filess exist -COMMON_DIR = .. - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -TARGET_SRC = main.c \ - keymap.c \ - matrix.c \ - led.c \ - ps2_usart.c \ - sendchar_dummy.c -# sendchar_usart.c - -OPT_DEFS = -DDEBUG_LEVEL=0 - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -#MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 -MCU = atmega168 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 20000000 - - -# Build Options -# comment out to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) -#USB_NKRO_ENABLE = yes # USB Nkey Rollover - - - -#---------------- Programming Options (avrdude) ---------------- -# Type: avrdude -c ? to get a full listing. -AVRDUDE_PROGRAMMER = usbasp -AVRDUDE_PORT = -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -#AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -include $(COMMON_DIR)/Makefile.vusb -include $(COMMON_DIR)/Makefile.common diff --git a/ps2_vusb/README b/ps2_vusb/README deleted file mode 100644 index 7d4512a48..000000000 --- a/ps2_vusb/README +++ /dev/null @@ -1,12 +0,0 @@ -PS/2 to USB keyboard converter with V-USB -========================================= -2011/02/07 - -NOT COMPLETED -development was suspended. - -TODO: -PS/2 library: losts data from keyboard occasionally, - should use interrupt thoroughly for communication. - -Code cleaning: merge code changed here to other subprojects and common modules. diff --git a/ps2_vusb/config.h b/ps2_vusb/config.h deleted file mode 100644 index 9447dd936..000000000 --- a/ps2_vusb/config.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef CONFIG_H -#define CONFIG_H - - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x2233 -// TODO: share these strings with usbconfig.h -// Edit usbconfig.h to change these. -#define MANUFACTURER t.m.k. -#define PRODUCT PS/2 keyboard converter -#define DESCRIPTION convert PS/2 keyboard to USB - -/* matrix size */ -#define MATRIX_ROWS 32 // keycode bit: 3-0 -#define MATRIX_COLS 8 // keycode bit: 6-4 - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \ - keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \ -) - - -/* USB NKey Rollover */ -#ifdef USB_NKRO_ENABLE -#endif - -/* mouse keys */ -#ifdef MOUSEKEY_ENABLE -# define MOUSEKEY_DELAY_TIME 255 -#endif - - -/* PS/2 lines */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 4 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 - - -// Synchronous USART is used to receive data from keyboard. -// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. -// NOTE: This is recomended strongly if you use V-USB library. -#define PS2_USE_USART - -// External or Pin Change Interrupt is used to receive data from keyboard. -// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. -//#define PS2_USE_INT - - -#ifdef PS2_USE_USART -// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge -// set DDR of CLOCK as input to be slave -#define PS2_USART_INIT() do { \ - PS2_CLOCK_DDR &= ~(1< -#include -#include -#include "usb_keycodes.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "keymap_skel.h" - - -#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) - -// Convert physical keyboard layout to matrix array. -// This is a macro to define keymap easily in keyboard layout form. -#define KEYMAP( \ - K76, K05,K06,K04,K0C, K03,K0B,K83,K0A, K01,K09,K78,K07, KFC,K7E,KFE, KB7,KBF,KDE, \ - K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ - K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ - K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ - K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ - K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \ -) { \ - { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ - { KB_NO, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \ - { KB_NO, KB_##K11, KB_##K12, KB_NO, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \ - { KB_NO, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \ - { KB_NO, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \ - { KB_NO, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \ - { KB_NO, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \ - { KB_NO, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \ - { KB_NO, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \ - { KB_NO, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ - { KB_NO, KB_NO, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_NO }, \ - { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \ - { KB_NO, KB_##K69, KB_NO, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \ - { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ - { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KAF }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KB7 }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KBF }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \ - { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ - { KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \ - { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \ - { KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \ -} - - -// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 5, // Fn0 - 6, // Fn1 - 5, // Fn2 - 0, // Fn3 - 0, // Fn4 - 0, // Fn5 - 0, // Fn6 - 0 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KB_SCLN, // Fn0 - KB_SLSH, // Fn1 - KB_A, // Fn2 - KB_NO, // Fn3 - KB_NO, // Fn4 - KB_NO, // Fn5 - KB_NO, // Fn6 - KB_NO // Fn7 -}; - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* keymap - * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. - * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| - * `---' `---------------' `---------------' `---------------' `-----------' `-----------' - * ,-----------------------------------------------------------. ,-----------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| - * |-----------------------------------------------------------| |-----------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | - * |-----------------------------------------------------------| `-----------' |-----------| +| - * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | - * |-----------------------------------------------------------| ,---. |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | - * |-----------------------------------------------------------| ,-----------. |-----------|Ent| - * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | - * `-----------------------------------------------------------' `-----------' `---------------' - */ - /* 0: default */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,FN2, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 1: plain Qwerty without layer switching */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 2: Colemak http://colemak.com */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS, - LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, - BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 5: Mouse keys */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,FN2, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), - /* 6: Cursor keys */ - KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, - CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, - LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3, - LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT - ), -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return KEYCODE(layer, row, col); -} - -uint8_t keymap_fn_layer(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_layer[biton(fn_bits)]); -} - -uint8_t keymap_fn_keycode(uint8_t fn_bits) -{ - return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); -} - -// define a condition to enter special function mode -bool keymap_is_special_mode(uint8_t fn_bits) -{ - return host_get_mods() == (BIT_LSHIFT | BIT_RSHIFT) || host_get_mods() == (BIT_LCTRL | BIT_RSHIFT); -} diff --git a/ps2_vusb/led.c b/ps2_vusb/led.c deleted file mode 100644 index d69b1c675..000000000 --- a/ps2_vusb/led.c +++ /dev/null @@ -1,16 +0,0 @@ -#include "stdint.h" -#include "ps2.h" -#include "led.h" - - -void led_set(uint8_t usb_led) -{ - uint8_t ps2_led = 0; - if (usb_led & (1< -#include -#include -#include -#include "usbdrv.h" -#include "oddebug.h" -#include "host_vusb.h" -#include "keyboard.h" - - -#if 0 -#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0) -#define DEBUGP(x) do { PORTC = x; } while (0) -#else -#define DEBUGP_INIT() -#define DEBUGP(x) -#endif - - -int main(void) -{ - DEBUGP_INIT(); - wdt_enable(WDTO_1S); - odDebugInit(); - usbInit(); - - /* enforce re-enumeration, do this while interrupts are disabled! */ - usbDeviceDisconnect(); - uint8_t i = 0; - /* fake USB disconnect for > 250 ms */ - while(--i){ - wdt_reset(); - _delay_ms(1); - } - usbDeviceConnect(); - sei(); - - keyboard_init(); - - while (1) { - DEBUGP(0x1); - wdt_reset(); - usbPoll(); - DEBUGP(0x2); - keyboard_proc(); - DEBUGP(0x3); - host_vusb_keyboard_send(); - } -} diff --git a/ps2_vusb/matrix.c b/ps2_vusb/matrix.c deleted file mode 100644 index ca3e0ef3e..000000000 --- a/ps2_vusb/matrix.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * scan matrix - */ -#include -#include -#include -#include -#include "print.h" -#include "util.h" -#include "debug.h" -#include "ps2.h" -#include "matrix_skel.h" - - -#if (MATRIX_COLS > 16) -# error "MATRIX_COLS must not exceed 16" -#endif -#if (MATRIX_ROWS > 255) -# error "MATRIX_ROWS must not exceed 255" -#endif - - -/* - * Matrix usage: - * "PS/2 Scan Codes Set 2" is assigned to 256(32x8)cells matrix. - * Hmm, It is very sparse and not efficient :( - * - * 8bit - * --------- - * 0| | - * :| XX | 00-7F for normal codes(without E0-prefix) - * f|_________| - * 10| | - * :| E0 XX | 80-FF for E0-prefix codes(use (XX|0x80) as code) - * 1f| | - * --------- - * exceptions: - * 83: F8[0x83](normal codes but > 0x7F) - * FC: PrintScreen[E0 7C or 84] - * FE: Puause - */ -#define F8 (0x83) -#define PRINT_SCREEN (0xFC) -#define PAUSE (0xFE) -#define ROW(code) (code>>3) -#define COL(code) (code&0x07) - -static bool is_modified = false; - -// matrix state buffer(1:on, 0:off) -#if (MATRIX_COLS <= 8) -static uint8_t matrix[MATRIX_ROWS]; -#else -static uint16_t matrix[MATRIX_ROWS]; -#endif - -#ifdef MATRIX_HAS_GHOST -static bool matrix_has_ghost_in_row(uint8_t row); -#endif -static void matrix_make(uint8_t code); -static void matrix_break(uint8_t code); - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - ps2_host_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - return; -} - -/* - * PS/2 Scan Code Set 2: Exceptional Handling - * - * There are several keys to be handled exceptionally. - * The scan code for these keys are varied or prefix/postfix'd - * depending on modifier key state. - * - * References: - * http://www.microsoft.com/whdc/archive/scancode.mspx - * http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/scancode.doc - * - * - * Insert, Delete, Home, End, PageUp, PageDown, Up, Down, Right, Left: - * Num Lock: off - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Ohter | | - * LShift | E0 F0 12 | E0 12 - * RShift | E0 F0 59 | E0 59 - * L+RShift | E0 F0 12 E0 F0 59 | E0 59 E0 12 - * - * Num Lock: on - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Other | E0 12 | E0 F0 12 - * Shift'd | | - * - * Handling: ignore these prefix/postfix codes - * - * - * Keypad-/: - * modifiers | make | break - * ----------+---------------------------+---------------------- - * Ohter | | - * LShift | E0 F0 12 | E0 12 - * RShift | E0 F0 59 | E0 59 - * L+RShift | E0 F0 12 E0 F0 59 | E0 59 E0 12 - * - * Handling: ignore these prefix/postfix codes - * - * - * PrintScreen: - * With hoding down modifiers, the scan code is sent as following: - * - * modifiers | make | break - * ----------+--------------+----------------------------------- - * Other | E0 12 E0 7C | E0 F0 7C E0 F0 12 - * Shift'd | E0 7C | E0 F0 7C - * Control'd | E0 7C | E0 F0 7C - * Alt'd | 84 | F0 84 - * - * Handling: ignore prefix/postfix codes and treat both scan code - * E0 7C and 84 as PrintScreen. - * - * Pause: - * With hoding down modifiers, the scan code is sent as following: - * - * modifiers | make(no break code) - * ----------+-------------------------------------------------- - * no mods | E1 14 77 E1 F0 14 F0 77 - * Control'd | E0 7E E0 F0 7E - * - * Handling: treat these two code sequence as Pause - * - */ -uint8_t matrix_scan(void) -{ - - static enum { - INIT, - F0, - E0, - E0_F0, - // states for Pause/Break - E1, - E1_14, - E1_14_77, - E1_14_77_E1, - E1_14_77_E1_F0, - E1_14_77_E1_F0_14, - E1_14_77_E1_F0_14_F0, - } state = INIT; - - - is_modified = false; - - // Pause/Break off(PS/2 has no break for this key) - if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) { - matrix_break(PAUSE); - } - - uint8_t code; - while ((code = ps2_host_recv())) { - switch (state) { - case INIT: - switch (code) { - case 0xE0: // 2byte make - state = E0; - break; - case 0xF0: // break code - state = F0; - break; - case 0xE1: // Pause/Break - state = E1; - break; - case 0x83: // F8 - matrix_make(F8); - state = INIT; - break; - case 0x84: // PrintScreen - matrix_make(PRINT_SCREEN); - state = INIT; - break; - default: // normal key make - if (code < 0x80) { - matrix_make(code); - } else { - debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case E0: - switch (code) { - case 0x12: // postfix/postfix code for exceptional keys - case 0x59: // postfix/postfix code for exceptional keys - // ignore - state = INIT; - break; - case 0x7E: // former part of Control-Pause[E0 7E E0 F0 7E] - matrix_make(PAUSE); - state = INIT; - break; - case 0xF0: // E0 break - state = E0_F0; - break; - default: // E0 make - if (code < 0x80) { - matrix_make(code|0x80); - } else { - debug("unexpected scan code at E0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case F0: - switch (code) { - case 0x83: - matrix_break(F8); - state = INIT; - break; - case 0x84: - matrix_break(PRINT_SCREEN); - state = INIT; - break; - default: - if (code < 0x80) { - matrix_break(code); - } else { - debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - case E0_F0: // E0 break - switch (code) { - case 0x12: // postfix/postfix code for exceptional keys - case 0x59: // postfix/postfix code for exceptional keys - case 0x7E: // latter part of Control-Pause[E0 7E E0 F0 7E] - // ignore - state = INIT; - break; - default: - if (code < 0x80) { - matrix_break(code|0x80); - } else { - debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n"); - } - state = INIT; - } - break; - /* Pause */ - case E1: - switch (code) { - case 0x14: - state = E1_14; - break; - default: - state = INIT; - } - break; - case E1_14: - switch (code) { - case 0x77: - state = E1_14_77; - break; - default: - state = INIT; - } - break; - case E1_14_77: - switch (code) { - case 0xE1: - state = E1_14_77_E1; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1: - switch (code) { - case 0xF0: - state = E1_14_77_E1_F0; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0: - switch (code) { - case 0x14: - state = E1_14_77_E1_F0_14; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0_14: - switch (code) { - case 0xF0: - state = E1_14_77_E1_F0_14_F0; - break; - default: - state = INIT; - } - break; - case E1_14_77_E1_F0_14_F0: - switch (code) { - case 0x77: - matrix_make(PAUSE); - state = INIT; - break; - default: - state = INIT; - } - break; - default: - state = INIT; - } - } - return 1; -} - -bool matrix_is_modified(void) -{ - return is_modified; -} - -inline -bool matrix_has_ghost(void) -{ -#ifdef MATRIX_HAS_GHOST - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix_has_ghost_in_row(i)) - return true; - } -#endif - return false; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & (1< - -This software is licensed with a Modified BSD License. -All of this is supposed to be Free Software, Open Source, DFSG-free, -GPL-compatible, and OK to use in both free and proprietary applications. -Additions and corrections to this file are welcome. - - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - -* Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - -* Neither the name of the copyright holders nor the names of - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. -*/ -/* -Primitive PS/2 Library for AVR -============================== -Host side is only supported now. -Synchronous USART is used to receive data by hardware process -rather than interrupt. During V-USB interrupt runs, CLOCK interrupt -cannot interpose. In the result it is prone to lost CLOCK edge. - - -I/O control ------------ -High state is asserted by internal pull-up. -If you have a signaling problem, you may need to have -external pull-up resisters on CLOCK and DATA line. - - -PS/2 References ---------------- -http://www.computer-engineering.org/ps2protocol/ -http://www.mcamafia.de/pdf/ibm_hitrc07.pdf -*/ -#include -#include -#include -#include -#include "ps2.h" -#include "debug.h" - - -#if 0 -#define DEBUGP_INIT() do { DDRC = 0xFF; } while (0) -#define DEBUGP(x) do { PORTC = x; } while (0) -#else -#define DEBUGP_INIT() -#define DEBUGP(x) -#endif - -#define WAIT(stat, us, err) do { \ - if (!wait_##stat(us)) { \ - ps2_error = err; \ - goto ERROR; \ - } \ -} while (0) - - -uint8_t ps2_error = PS2_ERR_NONE; - - -static inline void clock_lo(void); -static inline void clock_hi(void); -static inline bool clock_in(void); -static inline void data_lo(void); -static inline void data_hi(void); -static inline bool data_in(void); -static inline uint16_t wait_clock_lo(uint16_t us); -static inline uint16_t wait_clock_hi(uint16_t us); -static inline uint16_t wait_data_lo(uint16_t us); -static inline uint16_t wait_data_hi(uint16_t us); -static inline void idle(void); -static inline void inhibit(void); -#if defined PS2_USE_INT || defined PS2_USE_USART -static inline uint8_t pbuf_dequeue(void); -static inline void pbuf_enqueue(uint8_t data); -#endif - - -void ps2_host_init(void) -{ - DEBUGP_INIT(); - DEBUGP(0x1); - idle(); - PS2_USART_INIT(); - PS2_USART_RX_INT_ON(); -} - -uint8_t ps2_host_send(uint8_t data) -{ - uint8_t res = 0; - bool parity = true; - ps2_error = PS2_ERR_NONE; - - DEBUGP(0x6); - PS2_USART_OFF(); - - /* terminate a transmission if we have */ - inhibit(); - _delay_us(100); - - /* start bit [1] */ - data_lo(); - clock_hi(); - WAIT(clock_lo, 15000, 1); - /* data [2-9] */ - for (uint8_t i = 0; i < 8; i++) { - _delay_us(15); - if (data&(1<>2); - } else { - pbuf_enqueue(data); - } - DEBUGP(0x8); -} - -/* send LED state to keyboard */ -void ps2_host_set_led(uint8_t led) -{ - // send 0xED then keyboard keeps waiting for next LED data - // and keyboard does not send any scan codes during waiting. - // If fail to send LED data keyboard looks like being freezed. - uint8_t retry = 3; - while (retry-- && ps2_host_send(PS2_SET_LED) != PS2_ACK) - ; - retry = 3; - while (retry-- && ps2_host_send(led) != PS2_ACK) - ; -} - - -/*-------------------------------------------------------------------- - * static functions - *------------------------------------------------------------------*/ -static inline void clock_lo() -{ - PS2_CLOCK_PORT &= ~(1< -#include "sendchar.h" - - -int8_t sendchar(uint8_t c) -{ - return 1; -} diff --git a/ps2_vusb/sendchar_usart.c b/ps2_vusb/sendchar_usart.c deleted file mode 100644 index fe18177a3..000000000 --- a/ps2_vusb/sendchar_usart.c +++ /dev/null @@ -1,58 +0,0 @@ -#include -#include "oddebug.h" -#include "sendchar.h" - - -/* from oddebug.h */ -#if defined UBRR -# define ODDBG_UBRR UBRR -#elif defined UBRRL -# define ODDBG_UBRR UBRRL -#elif defined UBRR0 -# define ODDBG_UBRR UBRR0 -#elif defined UBRR0L -# define ODDBG_UBRR UBRR0L -#endif - -#if defined UCR -# define ODDBG_UCR UCR -#elif defined UCSRB -# define ODDBG_UCR UCSRB -#elif defined UCSR0B -# define ODDBG_UCR UCSR0B -#endif - -#if defined TXEN -# define ODDBG_TXEN TXEN -#else -# define ODDBG_TXEN TXEN0 -#endif - -#if defined USR -# define ODDBG_USR USR -#elif defined UCSRA -# define ODDBG_USR UCSRA -#elif defined UCSR0A -# define ODDBG_USR UCSR0A -#endif - -#if defined UDRE -# define ODDBG_UDRE UDRE -#else -# define ODDBG_UDRE UDRE0 -#endif - -#if defined UDR -# define ODDBG_UDR UDR -#elif defined UDR0 -# define ODDBG_UDR UDR0 -#endif - - -/* from oddebug.c */ -int8_t sendchar(uint8_t c) -{ - while(!(ODDBG_USR & (1 << ODDBG_UDRE))); /* wait for data register empty */ - ODDBG_UDR = c; - return 1; -} diff --git a/ps2_vusb/usbconfig.h b/ps2_vusb/usbconfig.h deleted file mode 100644 index 34807066f..000000000 --- a/ps2_vusb/usbconfig.h +++ /dev/null @@ -1,378 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 10 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 100 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 0 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x01 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 't', '.', 'm', '.', 'k', '.' -#define USB_CFG_VENDOR_NAME_LEN 6 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r' -#define USB_CFG_DEVICE_NAME_LEN 23 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -//#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -#endif /* __usbconfig_h_included__ */ diff --git a/tmk.c b/tmk.c index 00b571d54..18a05ffdf 100644 --- a/tmk.c +++ b/tmk.c @@ -30,7 +30,7 @@ #include #include "keyboard.h" #include "usb.h" -#include "matrix_skel.h" +#include "matrix.h" #include "print.h" #include "debug.h" #include "util.h" -- cgit v1.2.3