From b36e532b5e0eef219f33075e6e60b68d104484ee Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sat, 4 Jun 2016 00:10:47 -0400 Subject: cleans up folder structure * consolidates docs * deletes converter/ * updates .md references (most) --- converter/sun_usb/Makefile | 85 ----------------- converter/sun_usb/README | 106 --------------------- converter/sun_usb/command_extra.c | 61 ------------ converter/sun_usb/config.h | 95 ------------------- converter/sun_usb/keymap.c | 192 -------------------------------------- converter/sun_usb/keymap_sun3.c | 173 ---------------------------------- converter/sun_usb/led.c | 35 ------- converter/sun_usb/matrix.c | 186 ------------------------------------ 8 files changed, 933 deletions(-) delete mode 100644 converter/sun_usb/Makefile delete mode 100644 converter/sun_usb/README delete mode 100644 converter/sun_usb/command_extra.c delete mode 100644 converter/sun_usb/config.h delete mode 100644 converter/sun_usb/keymap.c delete mode 100644 converter/sun_usb/keymap_sun3.c delete mode 100644 converter/sun_usb/led.c delete mode 100644 converter/sun_usb/matrix.c (limited to 'converter/sun_usb') diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile deleted file mode 100644 index f046bfdd3..000000000 --- a/converter/sun_usb/Makefile +++ /dev/null @@ -1,85 +0,0 @@ -# Target file name (without extension). -TARGET = sun_usb - -# Directory common source filess exist -TMK_DIR = ../../tmk_core - -# Directory keyboard dependent files exist -TARGET_DIR = . - -# keyboard dependent files -SRC = keymap.c \ - matrix.c \ - led.c \ - command_extra.c \ - protocol/serial_soft.c - -CONFIG_H = config.h - - -# MCU name, you MUST set this to match the board you are using -# type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -#MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 -MCU = atmega32u2 - - -# Processor frequency. -# Normally the first thing your program should do is set the clock prescaler, -# so your program will run at the correct speed. You should also set this -# variable to same clock speed. The _delay_ms() macro uses this, and many -# examples use this variable to calculate timings. Do not add a "UL" here. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Build Options -# *Comment out* to disable the options. -# -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -#NKRO_ENABLE = yes # USB Nkey Rollover - - -# Boot Section Size in bytes -# Teensy halfKay 512 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Search Path -VPATH += $(TARGET_DIR) -VPATH += $(TMK_DIR) - - -include $(TMK_DIR)/protocol/lufa.mk -include $(TMK_DIR)/protocol.mk -include $(TMK_DIR)/common.mk -include $(TMK_DIR)/rules.mk diff --git a/converter/sun_usb/README b/converter/sun_usb/README deleted file mode 100644 index 98340dd31..000000000 --- a/converter/sun_usb/README +++ /dev/null @@ -1,106 +0,0 @@ -Sun to USB keyboard protocol converter -====================================== -Target MCU is ATMega32u4 but other USB capable AVR will also work. - -This converter will work with Sun Type 2-5 Keyboards. - - -Tested on: -Sun Type 3 Keyboard: http://blog.daveastels.com.s3-website-us-west-2.amazonaws.com/2014/12/27/type-3-keyboard.html -CTCSP SHORT TYPE KEYBOARD(Type 5): http://imgur.com/a/QIv6p - - -Keymap of Type 3(keymap_sun3.c) were impoted from dastels's repository. -https://github.com/dastels/tmk_keyboard/tree/master/converter/sun3_usb - - - -Connector ---------- - 8Pin mini DIN - ___ ___ - / |_| \ - / 8 7 6 \ - | 5 4 3 | - \_ 2 1 _/ - \_____/ - (receptacle) - - Wiring: - Pin mini DIN MCU - ---------------------------------- - 1 GND GND - 2 GND GND - 3 5V - 4 RX/TX(Mouse) - 5 RX PD3 - 6 TX PD2 - 7 GND GND - 8 5V VCC - - -Protocol --------- -Signal: Asynchronous, Negative logic, 1200baud, No Flow control -Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit - - AVR USART engine expects positive logic while Sun keyboard signal is negative. - To use AVR UART engine you need external inverter in front of RX and TX pin. - Otherwise you can software serial routine to communicate the keyboard. - -This converter uses software method, you doesn't need any inverter part. - - -Commands From System To Keyboard - 0x01 Reset - Keyboard responds with following byte sequence: - Success: 0xFF 0x04 0x7F - Fail: 0x7E 0x01 0x7F - 0x02 Bell On - 0x03 Bell Off - 0x0A Click On - 0x0B Click Off - 0x0E LED - followed by LED status byte: - bit: 3 2 1 0 - LED: CapsLk ScrLk Compose NumLk - 0x0F Layout - Keyboard responds with 'Layout Response' 0xFE 0xXX - -Commands From Keyboard To System - 0x7F Idle - means no keys pressed. - 0xFE Layout Response - 0xFF Reset Response(followed by 0x04) - -Reference - http://kentie.net/article/sunkbd/page2.htm - http://kentie.net/article/sunkbd/KBD.pdf - - -Build Firmware --------------- -Just use 'make' - $ cd sun_usb - $ make -Then, load the binary to MCU with your favorite programmer. - - -Sun commands ------------- -You can send Sun protocol commands with TMK `Magic` key combo. By default `Magic` key is `LShift` + `RShift`, `LAlt` + `RAlt' or `LMeta` + `RMeta`. -https://github.com/tmk/tmk_keyboard#magic-commands - -Following Sun specific commands are available. For example, to send 'Bell On' you can press `LShift` + `RShift` + `Up` keys simultaneously. - -``` ------ Sun converter Help ----- -Up: Bell On -Down: Bell Off -Left: Click On -Right: Click Off -PgUp: LED all On -PgDown: LED all On -Insert: Layout -Delete: Reset -``` diff --git a/converter/sun_usb/command_extra.c b/converter/sun_usb/command_extra.c deleted file mode 100644 index aba3fe6da..000000000 --- a/converter/sun_usb/command_extra.c +++ /dev/null @@ -1,61 +0,0 @@ -#include "stdbool.h" -#include "stdint.h" -#include "keycode.h" -#include "serial.h" -#include "print.h" -#include "command.h" - -bool command_extra(uint8_t code) -{ - switch (code) { - case KC_H: - case KC_SLASH: /* ? */ - print("\n\n----- Sun converter Help -----\n"); - print("Up: Bell On\n"); - print("Down: Bell Off\n"); - print("Left: Click On\n"); - print("Right: Click Off\n"); - print("PgUp: LED all On\n"); - print("PgDown: LED all On\n"); - print("Insert: Layout\n"); - print("Delete: Reset\n"); - return false; - case KC_DEL: - print("Reset\n"); - serial_send(0x01); - break; - case KC_UP: - print("Bell On\n"); - serial_send(0x02); - break; - case KC_DOWN: - print("Bell Off\n"); - serial_send(0x03); - break; - case KC_LEFT: - print("Click On\n"); - serial_send(0x0A); - break; - case KC_RIGHT: - print("Click Off\n"); - serial_send(0x0B); - break; - case KC_PGUP: - print("LED all on\n"); - serial_send(0x0E); - serial_send(0xFF); - break; - case KC_PGDOWN: - print("LED all off\n"); - serial_send(0x0E); - serial_send(0x00); - break; - case KC_INSERT: - print("layout\n"); - serial_send(0x0F); - break; - default: - return false; - } - return true; -} diff --git a/converter/sun_usb/config.h b/converter/sun_usb/config.h deleted file mode 100644 index 66036da93..000000000 --- a/converter/sun_usb/config.h +++ /dev/null @@ -1,95 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3333 -#define DEVICE_VER 0x0100 -#define MANUFACTURER t.m.k. -#define PRODUCT Sun keyboard converter -#define DESCRIPTION converts Sun keyboard protocol into USB - -/* matrix size */ -#define MATRIX_ROWS 16 -#define MATRIX_COLS 8 - -/* key combination for command */ -#define IS_COMMAND() ( \ - keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \ - keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ - keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) - -/* legacy keymap support */ -#define USE_LEGACY_KEYMAP - - -/* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 1200 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#define SERIAL_SOFT_LOGIC_NEGATIVE -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 2 -#define SERIAL_SOFT_RXD_VECT INT2_vect -/* RXD Interupt */ -#ifdef SERIAL_SOFT_LOGIC_NEGATIVE -/* enable interrupt: INT2(rising edge) */ -#define INTR_TRIG_EDGE ((1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include "keycode.h" -#include "util.h" -#include "keymap.h" - - - - -/* Sun type 5 keyboard -,-------. ,---, ,---------------. ,---------------. ,---------------. ,-----------. ,---------------. -| 76 | | | | 05| 06| 08| 0A| | 0C| 0E| 10| 11| | 12| 07| 09| 0B| | 16| 17| 15| | 2D| 02| 04| 30| -`-------' `---' `---------------' `---------------' `---------------' `-----------' `---------------' -,-------. ,-----------------------------------------------------------. ,-----------. ,---------------. -| 01| 03| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2C| 34| 60| | 62| 2E| 2F| 47| -|-------| |-----------------------------------------------------------| |------------ |---------------| -| 19| 1A| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 2B | | 42| 4A| 7B| | 44| 45| 46| | -|-------| |-----------------------------------------------------------| `-----------' |-----------| 7D| -| 31| 33| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| | -|-------| |-----------------------------------------------------------| ,---. |-----------|---| -| 48| 49| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E | | 14| | 70| 71| 72| | -|-------| |-----------------------------------------------------------| .-----------. |-----------| 5A| -| 5F| 61| | 77 | 13| 78 |*73 | 79 |*74 |*75| 7A | 43| 0D| | 18| 1B| 1C| | 5E | 32| | -`-------' `-----------------------------------------------------------' `-----------' `---------------' -*/ -#define KEYMAP( \ - K76, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, K16,K17,K15, K2D,K02,K04,K30, \ - K01,K03, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C,K34,K60, K62,K2E,K2F,K47, \ - K19,K1A, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42,K4A,K7B, K44,K45,K46,K7D, \ - K31,K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K48,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, K70,K71,K72,K5A, \ - K5F,K61, K77,K13, K78, K73, K79, K74, K75, K7A, K43, K0D, K18,K1B,K1C, K5E, K32 \ -) { \ - { KC_NO, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ - { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO, }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ - { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ - { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ - { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ - { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ - { KC_##K48, KC_##K49, KC_##K4A, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ - { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \ - { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ - { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_NO }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ - { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO, KC_##K7D, KC_NO, KC_NO } \ -} - -/* CTCSP SHORT TYPE KEYBOARD */ -#define SHORT_TYPE( \ - K01, K05,K06,K08,K0A,K0C,K0E, K61,K49,K33, K30, K2C,K34,K60, \ - K10,K11,K12,K07,K09,K0B, K42,K4A,K7B, \ - K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, \ - K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, \ - K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, \ - K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K0D,K14,K6E, \ - K77,K13, K78, K79, K7A,K43,K62,K18,K1B,K1C \ -) KEYMAP( \ - HELP, K05,K06,K08,K0A, K0C,K0E,K10,K11, K12,K07,K09,K0B, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,K30, \ - K01, AGAIN, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2C, K34, K60, K62, PSLS,PAST,PMNS, \ - MENU, UNDO, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K2B, K42, K4A, K7B, P7, P8, P9, PPLS, \ - SELECT, K33, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, P4, P5, P6, \ - EXECUTE,K49, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E, K14, P1, P2, P3, PENT, \ - FIND, K61, K77,K13, K78, HENK, K79, MHEN, KANA, K7A,K43,K0D, K18, K1B, K1C, P0, PDOT \ -) - - -// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 2, // Fn0 - 3, // Fn1 - 4, // Fn2 - 0, // Fn3 - 0, // Fn4 - 0, // Fn5 - 0, // Fn6 - 0 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KC_NO, // Fn0 - KC_SCLN, // Fn1 - KC_SLSH, // Fn2 - KC_NO, // Fn3 - KC_NO, // Fn4 - KC_NO, // Fn5 - KC_NO, // Fn6 - KC_NO // Fn7 -}; - - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* - KEYMAP( - HELP, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12, PSCR,SLCK,PAUS, MUTE,VOLD,VOLU,PWR, - STOP, AGAIN, ESC,1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, - MENU, UNDO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, DEL, END, PGDN, P7, P8, P9, PPLS, - SELECT, COPY, LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, - EXECUTE,PASTE, LSFT, Z, X, C, V, B, N, M, COMM,DOT,SLSH, RSFT, UP, P1, P2, P3, PENT, - FIND, CUT, CAPS, LALT, LGUI,HENK, SPC, MHEN,KANA,RGUI,APP, RALT, LEFT,DOWN,RGHT, P0, PDOT - ), -*/ - // 0: default - SHORT_TYPE( - STOP, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, - LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH, RALT,UP, RSFT, - CAPS,LALT,LGUI, SPC, RGUI,APP, NLCK,LEFT,DOWN,RGHT - ), - // 1: with layer keys - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, - LSFT, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,UP, FN0, - CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, LEFT,DOWN,RGHT - ), - // 2: HHKB - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC, - LCTL, VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, - LSFT, Z, X, C, V, B, NO, NO, END, PGDN,DOWN, RSFT,PGUP,FN0, - CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, HOME,PGDN,END - ), - // 3: Mousekey - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, - LCTL, NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, - LSFT, NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, RSFT,UP, NO, - CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT - ), - // 4: Cursor - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, - LCTL, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, - LSFT, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,UP, NO, - CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT - ), -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); -} - -uint8_t keymap_fn_layer(uint8_t index) -{ - return pgm_read_byte(&fn_layer[index]); -} - -uint8_t keymap_fn_keycode(uint8_t index) -{ - return pgm_read_byte(&fn_keycode[index]); -} diff --git a/converter/sun_usb/keymap_sun3.c b/converter/sun_usb/keymap_sun3.c deleted file mode 100644 index 273cd9442..000000000 --- a/converter/sun_usb/keymap_sun3.c +++ /dev/null @@ -1,173 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include "keycode.h" -#include "util.h" -#include "keymap.h" - - -/* Sun type 3 keyboard -,-------. ,-----------------------------------------------------------. ,-----------. -| 01| 03| | 05| 06| 08| 0A| 0C| 0E| 10| 11| 12| 2B| | 15| 16| 17| -|-------| |-----------------------------------------------------------| |-----------| -| 19| 1A| | 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 58| 2A| | 2D| 2E| 2F| -|-------| |-----------------------------------------------------------| |-----------| -| 31| 33| | 35 | 36| 37| 38| 39| 3A| 3B| 3C| 3D| 3E| 3F| 40| 41| 42 | | 44| 45| 46| -|-------| |-----------------------------------------------------------| |-----------| -| 48| 49| | 4C | 4D| 4E| 4F| 50| 51| 52| 53| 54| 55| 56| 57| 59 | | 5B| 5C| 5D| -|-------| |-----------------------------------------------------------| |-----------| -| 5F| 61| | 63 | 64| 65| 66| 67| 68| 69| 6A| 6B| 6C| 6D| 6E| 6F| | 70| 71| 72| -`-------' |-----------------------------------------------------------| `-----------' - | 77 | 78 | 79 | 7A | 13 | - `-----------------------------------------------------------' -*/ - - -#define KEYMAP( \ - K01,K03, K05,K06, K08, K0A, K0C, K0E, K10,K11,K12,K2B, K15,K16,K17, \ - K19,K1A, K1D,K1E,K1F,K20,K21,K22,K23,K24,K25,K26,K27,K28,K29,K58,K2A, K2D,K2E,K2F, \ - K31,K33, K35, K36,K37,K38,K39,K3A,K3B,K3C,K3D,K3E,K3F,K40,K41, K42, K44,K45,K46, \ - K48,K49, K4C, K4D,K4E,K4F,K50,K51,K52,K53,K54,K55,K56,K57, K59, K5B,K5C,K5D, \ - K5F,K61, K63, K64,K65,K66,K67,K68,K69,K6A,K6B,K6C,K6D, K6E,K6F, K70,K71,K72, \ - K77,K78, K79, K7A,K13 \ -) { \ - { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_NO, KC_##K05, KC_##K06, KC_NO }, \ - { KC_##K08, KC_NO, KC_##K0A, KC_NO, KC_##K0C, KC_NO, KC_##K0E, KC_NO }, \ - { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_NO, KC_##K15, KC_##K16, KC_##K17 }, \ - { KC_NO, KC_##K19, KC_##K1A, KC_NO, KC_NO, KC_##K1D, KC_##K1E, KC_##K1F }, \ - { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ - { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D, KC_##K2E, KC_##K2F }, \ - { KC_NO, KC_##K31, KC_NO, KC_##K33, KC_NO, KC_##K35, KC_##K36, KC_##K37 }, \ - { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ - { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_##K44, KC_##K45, KC_##K46, KC_NO }, \ - { KC_##K48, KC_##K49, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ - { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ - { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_##K5D, KC_NO, KC_##K5F }, \ - { KC_NO, KC_##K61, KC_NO, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ - { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \ - { KC_##K70, KC_##K71, KC_##K72, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K77 }, \ - { KC_##K78, KC_##K79, KC_##K7A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ -} - -// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. -static const uint8_t PROGMEM fn_layer[] = { - 2, // Fn0 - 3, // Fn1 - 4, // Fn2 - 0, // Fn3 - 0, // Fn4 - 0, // Fn5 - 0, // Fn6 - 0 // Fn7 -}; - -// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. -// See layer.c for details. -static const uint8_t PROGMEM fn_keycode[] = { - KC_NO, // Fn0 - KC_SCLN, // Fn1 - KC_SLSH, // Fn2 - KC_NO, // Fn3 - KC_NO, // Fn4 - KC_NO, // Fn5 - KC_NO, // Fn6 - KC_NO // Fn7 -}; - - -static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - KEYMAP( - F10, F11, F1, F2, F3, F4, F5, F6, F7, F8, F9, BSPC, VOLD, MUTE, VOLU, - F12, F13, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0,MINS, EQL, BSLS, GRV, MPRV, MPLY, MNXT, - F14, F15, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, DEL, HOME, UP, PGUP, - F16, F17, LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, LEFT, INSERT, RIGHT, - F18, F19, LSFT, Z, X, C, V, B, N, M, COMM,DOT,SLSH, RSFT,RCTL, END, DOWN, PGDOWN, - LGUI, LALT, SPC, RALT,RGUI - ), - /* - // 0: default - SHORT_TYPE( - STOP, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, - LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH, RALT,UP, RSFT, - CAPS,LALT,LGUI, SPC, RGUI,APP, NLCK,LEFT,DOWN,RGHT - ), - // 1: with layer keys - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSLS,GRV, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSPC, - LCTL, A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, - LSFT, Z, X, C, V, B, N, M, COMM,DOT, FN2, RSFT,UP, FN0, - CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, LEFT,DOWN,RGHT - ), - // 2: HHKB - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, BSPC, - LCTL, VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, - LSFT, Z, X, C, V, B, NO, NO, END, PGDN,DOWN, RSFT,PGUP,FN0, - CAPS,LALT,LGUI, SPC, RGUI,RALT,FN0, HOME,PGDN,END - ), - // 3: Mousekey - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSPC, - LCTL, NO, ACL0,ACL1,ACL2,NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, - LSFT, NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, RSFT,UP, NO, - CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT - ), - // 4: Cursor - SHORT_TYPE( - ESC, F1,F2,F3,F4, F5, F6, CUT,PASTE,COPY,PWR, INS, HOME,PGUP, - F7,F8,F9,F10,F11,F12, DEL, END, PGDN, - GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, - CAPS, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSPC, - LCTL, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, - LSFT, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, RSFT,UP, NO, - CAPS,LALT,LGUI, BTN1, RGUI,RALT,NO, LEFT,DOWN,RGHT - ), - */ -}; - - -uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) -{ - return pgm_read_byte(&keymaps[(layer)][(row)][(col)]); -} - -uint8_t keymap_fn_layer(uint8_t index) -{ - return pgm_read_byte(&fn_layer[index]); -} - -uint8_t keymap_fn_keycode(uint8_t index) -{ - return pgm_read_byte(&fn_keycode[index]); -} diff --git a/converter/sun_usb/led.c b/converter/sun_usb/led.c deleted file mode 100644 index 809398faa..000000000 --- a/converter/sun_usb/led.c +++ /dev/null @@ -1,35 +0,0 @@ -/* -Copyright 2012 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "stdint.h" -#include "serial.h" -#include "led.h" -#include "debug.h" - - -void led_set(uint8_t usb_led) -{ - uint8_t sun_led = 0; - if (usb_led & (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include -#include -#include "print.h" -#include "util.h" -#include "matrix.h" -#include "debug.h" -#include "protocol/serial.h" - - -/* - * Matrix Array usage: - * - * ROW: 16(4bits) - * COL: 8(3bits) - * - * 8bit wide - * +---------+ - * 0|00 ... 07| - * 1|08 ... 0F| - * :| ... | - * :| ... | - * E|70 ... 77| - * F|78 ... 7F| - * +---------+ - */ -static uint8_t matrix[MATRIX_ROWS]; -#define ROW(code) ((code>>3)&0xF) -#define COL(code) (code&0x07) - -static bool is_modified = false; - - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - DDRD |= (1<<6); - PORTD |= (1<<6); - //debug_enable = true; - - serial_init(); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - - // wait for keyboard coming up - // otherwise LED status update fails - print("Reseting "); - while (1) { - print("."); - while (serial_recv()); - serial_send(0x01); - _delay_ms(500); - if (serial_recv() == 0xFF) { - _delay_ms(500); - if (serial_recv() == 0x04) - break; - } - } - print(" Done\n"); - return; -} - -uint8_t matrix_scan(void) -{ - is_modified = false; - - uint8_t code; - code = serial_recv(); - if (!code) return 0; - - debug_hex(code); debug(" "); - - switch (code) { - case 0xFF: // reset success: FF 04 - print("reset: "); - _delay_ms(500); - code = serial_recv(); - xprintf("%02X\n", code); - if (code == 0x04) { - // LED status - led_set(host_keyboard_leds()); - } - return 0; - case 0xFE: // layout: FE - print("layout: "); - _delay_ms(500); - xprintf("%02X\n", serial_recv()); - return 0; - case 0x7E: // reset fail: 7E 01 - print("reset fail: "); - _delay_ms(500); - xprintf("%02X\n", serial_recv()); - return 0; - case 0x7F: - // all keys up - for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; - return 0; - } - - if (code&0x80) { - // break code - if (matrix_is_on(ROW(code), COL(code))) { - matrix[ROW(code)] &= ~(1<