From 66d7fc34b2214282fd822f66abca0905ec5a1ffe Mon Sep 17 00:00:00 2001
From: Ryan <fauxpark@gmail.com>
Date: Fri, 21 Feb 2020 17:12:15 +1100
Subject: Add Arm Teensys to mcu_selection.mk (#8026)

* Add Arm Teensys to mcu_selection.mk

* Roll back halfkeyboard keymap changes

* Remove extra newline
---
 keyboards/infinity60/rules.mk | 36 +++++++-----------------------------
 1 file changed, 7 insertions(+), 29 deletions(-)

(limited to 'keyboards/infinity60/rules.mk')

diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index f93766af9..579eab0f3 100644
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -1,16 +1,5 @@
-# project specific files
-SRC =	matrix.c \
-	led.c \
-	led_controller.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
+# MCU name
+MCU = MK20DX128
 
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
@@ -23,14 +12,6 @@ MCU_SERIES = K20x
 #   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX128BLDR4
 
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -40,14 +21,6 @@ MCU_STARTUP = k20x5
 #   - MCHCK_K20 for Infinity KB
 BOARD = MCHCK_K20
 
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
@@ -72,6 +45,11 @@ SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 
+# project specific files
+SRC = matrix.c \
+      led.c \
+      led_controller.c
+
 LAYOUTS = 60_ansi_split_bs_rshift
 
 
-- 
cgit v1.2.3