From 645c5fabf24411fe65d2172a3509c26e053651a2 Mon Sep 17 00:00:00 2001 From: Jumail Mundekkat Date: Mon, 27 Jan 2020 09:06:56 +1100 Subject: Add VIA support to MxSS, plus minor tweaks (#7809) * Add VIA support to mxss and general cleanup * Add support for RGB test for FLEDs * Add LAYOUT_all to allow for more configuration * Remove blank layers * Updated readme * Improve use of EEPROM * Credit where its due * Use the latest iteration of rgblight code * Keep the RGB timer running if the front LED is in RGB mode * Fix RGB breathing animation * Better supported RGB animation Only thing not working is alternating, but that's not too important * Abstract front LED handlers from main kb code * Add support for indicator LED color changing * Remove debug statement * Persist indicator LED colors * Mark custom sections in rgblight.c * Light commenting * Fix up keymaps * Add/update comments * Remove bloat from default hex * Tidy a stray tab * Out with the old, in with the new * Out with the old, in with the new * Add LAYER_STATE_8BIT for VIA keymap --- keyboards/mxss/mxss_frontled.h | 57 ++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 25 deletions(-) (limited to 'keyboards/mxss/mxss_frontled.h') diff --git a/keyboards/mxss/mxss_frontled.h b/keyboards/mxss/mxss_frontled.h index 1350266ba..366066865 100644 --- a/keyboards/mxss/mxss_frontled.h +++ b/keyboards/mxss/mxss_frontled.h @@ -1,4 +1,4 @@ -/* Copyright 2018 Jumail Mundekkat / MxBlue +/* Copyright 2020 Jumail Mundekkat / MxBlue * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,11 +16,12 @@ // EEPROM management code taken from Wilba6582 // https://github.com/Wilba6582/qmk_firmware/blob/zeal60/keyboards/zeal60/zeal_eeprom.h - -#ifndef MXSS_FRONTLED_H -#define MXSS_FRONTLED_H +#pragma once + +#include "quantum.h" #include "quantum_keycodes.h" +#include "via.h" // RGBLED index for front LEDs #define RGBLIGHT_FLED1 14 @@ -29,13 +30,13 @@ // Brightness increase step for front LEDs #define FLED_VAL_STEP 8 -// QMK never uses more then 32bytes of EEPROM, so our region starts there -// Magic value to verify the state of the EEPROM -#define EEPROM_MAGIC 0xC3E7 -#define EEPROM_MAGIC_ADDR ((void*)32) - // Front LED settings -#define EEPROM_FRONTLED_ADDR ((void*)34) +#define FRONTLED_CONF_ADDR ((uint8_t*) VIA_EEPROM_CUSTOM_CONFIG_ADDR) +#define FRONTLED_COLOR_CNT_ADDR (FRONTLED_CONF_ADDR + 1) +#define FRONTLED_COLOR_ADDR ((uint16_t*)(FRONTLED_COLOR_CNT_ADDR + 1)) + +// No point persisting more 4, VIA only allows editing of 3 + 1 for caps +#define FRONTLED_COLOR_MAXCNT 4 // Modes for front LEDs #define FLED_OFF 0b00 @@ -43,10 +44,6 @@ #define FLED_RGB 0b10 #define FLED_UNDEF 0b11 -// Hard-coded color for capslock indicator in FLED_INDI mode, H:0% S:100% = Red -#define FLED_CAPS_H 0 -#define FLED_CAPS_S 255 - // Config storage format for EEPROM typedef union { uint8_t raw; @@ -57,25 +54,35 @@ typedef union { } fled_config; // Structure to store hue and saturation values -typedef struct _hs_set { - uint16_t hue; - uint8_t sat; +typedef union { + uint16_t raw; + struct { + uint8_t hue; + uint8_t sat; + }; } hs_set; // Custom keycodes for front LED control enum fled_keycodes { - FLED_MOD = SAFE_RANGE, - FLED_VAI, - FLED_VAD, - NEW_SAFE_RANGE // define a new safe range + FLED_MOD = USER00, // USER00 = VIA custom keycode start + FLED_VAI, + FLED_VAD, + NEW_SAFE_RANGE // define a new safe range }; -bool eeprom_is_valid(void); // Check if EEPROM has been set up -void eeprom_set_valid(bool valid); // Change validity state of EEPROM -void eeprom_update_conf(void); // Store current front LED config to EEPROM +void fled_init(void); // Run init functions for front LEDs +void process_record_fled(uint16_t keycode, keyrecord_t* record); // Process keycodes for front LEDs +void fled_load_conf(void); // Load front LED config from EEPROM +void fled_update_conf(void); // Store current front LED config to EEPROM void fled_mode_cycle(void); // Cycle between the 3 modes for the front LEDs void fled_val_increase(void); // Increase the brightness of the front LEDs void fled_val_decrease(void); // Decrease the brightness of the front LEDs -#endif //MXSS_FRONTLED_H \ No newline at end of file +void fled_layer_update(layer_state_t state); // Process layer update for front LEDs +void fled_lock_update(led_t led_state); // Process lock update for front LEDs + +void set_fled_layer_color(uint8_t layer, hs_set hs); // Set color for a given layer +void set_fled_caps_color(hs_set hs); // Set color for the capslock indicator +hs_set get_fled_caps_color(void); // Get color for the capslock indicator +hs_set get_fled_layer_color(uint8_t layer); // Get color for a given layer -- cgit v1.2.3