From 2fcfd5cff7089338385c40a630315939a7a9ebbc Mon Sep 17 00:00:00 2001 From: wanleg <32079073+wanleg@users.noreply.github.com> Date: Thu, 30 Aug 2018 09:34:14 -0700 Subject: Keymap: Wanleg updates (#3794) * various edits and minor additions * updates * updates * updates * lets_split LEDs off instructions * lets_split LEDs off instructions * turn off lets_split LEDs in userspace * one-hand setup for right side --- layouts/community/ortho_4x12/wanleg/readme.md | 40 +++++++++++++++++++++++---- 1 file changed, 35 insertions(+), 5 deletions(-) (limited to 'layouts/community/ortho_4x12/wanleg/readme.md') diff --git a/layouts/community/ortho_4x12/wanleg/readme.md b/layouts/community/ortho_4x12/wanleg/readme.md index 2f89d1de6..1cd41d116 100644 --- a/layouts/community/ortho_4x12/wanleg/readme.md +++ b/layouts/community/ortho_4x12/wanleg/readme.md @@ -16,9 +16,39 @@ Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Window ## Using QMK DFU Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with `make lets_split/rev2::dfu dfu=qmk` -The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` +The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina` ---- -# JJ40 -## To Do -- [ ] Mousekeys not working with Userspace for some reason (jj40 only) \ No newline at end of file +# Let's Split LEDs +In `qmk_firmware/keyboards/lets_split/rev2/rev2.c`, replace contents with +``` +#include "lets_split.h" + + +#ifdef SSD1306OLED +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} +#endif + +void matrix_init_kb(void) { + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + //turn off LEDs on ProMicro + DDRD &= ~(1<<5); + PORTD &= ~(1<<5); + + DDRB &= ~(1<<0); + PORTB &= ~(1<<0); + + matrix_init_user(); +}; +``` +to turn off LEDs -- cgit v1.2.3