From 53a6501d71cabbe4c5c41652cf24fdc059609e5d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 15 May 2018 19:34:34 -0700 Subject: Yet another update to drashna keymaps and userspace (EEPROM, RGB indicators) (#2959) * More Iris Tweaks * Mess with iris arrow keys * Massive layout overhaul to make everything more OLKB * Additional tweaks * Cleanup Userspace Remove unused layer code, and properly set userspace eeprom structure. * EEPROM stuff * Only use indicators if layer indication is enabled * Iris and Orthodox Tweaks (Status Indicators) * Additional tweaks to finish tri layer conversion * Disable ProMicro ligths globally * Add Pro Micro hacking info * Successfully get mod indication working on thumb clusters * Enable printing when console is enabled * Make Modifier Indicator lights more modular * Keymap cleanup * Tapping test changes * Cleanup and minor tweaks --- users/drashna/readme.md | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) (limited to 'users/drashna/readme.md') diff --git a/users/drashna/readme.md b/users/drashna/readme.md index 79758e7e5..ddf24b24f 100644 --- a/users/drashna/readme.md +++ b/users/drashna/readme.md @@ -162,7 +162,7 @@ This tells us where in the EEPROM that the data structure is located, and this s ```c typedef union { - uint32_t raw; + uint8_t raw; struct { bool clicky_enable :1; bool is_overwatch :1; @@ -174,3 +174,23 @@ Then, in your C file, you want to add: `userspace_config_t userspace_config;`, a From there, you'd want to use the data structure (such as `userspace_config.is_overwatch`) when you want to check this value. And if you want to update it, update directly and then use `eeprom_update_byte(EECONFIG_USERSPACE, userspace_config.raw);` to write the value back to the EEPROM. + + +Pro Micro Hacking +----------------- + +Well, you can get the QMK DFU bootloader working on the ProMicro. But you need to change fuses. + +What worked to get into the firmware properly was: + +``` +Low: 0x5E High: 0x99 Extended: 0xF3 Lock: 0xFF +``` + +But some of the columns and rows didn't work, like the pin mapping was wrong. Even when setting the bootloader settings. + + This is here for future reference. And the default fuse settings I believe were: + +``` +Low: 0xFF High: 0xD8 Extended: 0xC3 Lock: 0x3F +``` -- cgit v1.2.3