#ifndef CONFIG_DEFINITIONS_H #define CONFIG_DEFINITIONS_H #define B0 0x20 #define B1 0x21 #define B2 0x22 #define B3 0x23 #define B4 0x24 #define B5 0x25 #define B6 0x26 #define B7 0x27 #define C0 0x30 #define C1 0x31 #define C2 0x32 #define C3 0x33 #define C4 0x34 #define C5 0x35 #define C6 0x36 #define C7 0x37 #define D0 0x40 #define D1 0x41 #define D2 0x42 #define D3 0x43 #define D4 0x44 #define D5 0x45 #define D6 0x46 #define D7 0x47 #define E0 0x50 #define E1 0x51 #define E2 0x52 #define E3 0x53 #define E4 0x54 #define E5 0x55 #define E6 0x56 #define E7 0x57 #define F0 0x60 #define F1 0x61 #define F2 0x62 #define F3 0x63 #define F4 0x64 #define F5 0x65 #define F6 0x66 #define F7 0x67 #define COL2ROW 0x0 #define ROW2COL 0x1 #ifdef BLUETOOTH_ENABLE #ifdef __AVR_ATmega32U4__ #define SERIAL_UART_BAUD 9600 #define SERIAL_UART_DATA UDR1 #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) #define SERIAL_UART_RXD_VECT USART1_RX_vect #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) #define SERIAL_UART_INIT() do { \ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ UCSR1B = (1<<TXEN1); /* TX: enable */ \ UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ sei(); \ } while(0) #else # error "USART configuration is needed." #endif // I'm fairly sure these aren't needed, but oh well - Jack /* * PS/2 Interrupt configuration */ #ifdef PS2_USE_INT /* uses INT1 for clock line(ATMega32U4) */ #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND #define PS2_CLOCK_DDR DDRD #define PS2_CLOCK_BIT 1 #define PS2_DATA_PORT PORTD #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 0 #define PS2_INT_INIT() do { \ EICRA |= ((1<<ISC11) | \ (0<<ISC10)); \ } while (0) #define PS2_INT_ON() do { \ EIMSK |= (1<<INT1); \ } while (0) #define PS2_INT_OFF() do { \ EIMSK &= ~(1<<INT1); \ } while (0) #define PS2_INT_VECT INT1_vect #endif /* * PS/2 Busywait configuration */ #ifdef PS2_USE_BUSYWAIT #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND #define PS2_CLOCK_DDR DDRD #define PS2_CLOCK_BIT 1 #define PS2_DATA_PORT PORTD #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 0 #endif #endif #endif