/* ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file templates/chconf.h * @brief Configuration file template. * @details A copy of this file must be placed in each project directory, it * contains the application specific kernel settings. * * @addtogroup config * @details Kernel related settings and hooks. * @{ */ #ifndef CHCONF_H #define CHCONF_H #define _CHIBIOS_RT_CONF_ /*===========================================================================*/ /** * @name System timers settings * @{ */ /*===========================================================================*/ /** * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ #define CH_CFG_ST_RESOLUTION 32 /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ #define CH_CFG_ST_FREQUENCY 10000 /** * @brief Time delta constant for the tick-less mode. * @note If this value is zero then the system uses the classic * periodic tick. This value represents the minimum number * of ticks that is safe to specify in a timeout directive. * The value one is not valid, timeouts are rounded up to * this value. */ #define CH_CFG_ST_TIMEDELTA 2 /** @} */ /*===========================================================================*/ /** * @name Kernel parameters and options * @{ */ /*===========================================================================*/ /** * @brief Round robin interval. * @details This constant is the number of system ticks allowed for the * threads before preemption occurs. Setting this value to zero * disables the preemption for threads with equal priority and the * round robin becomes cooperative. Note that higher priority * threads can still preempt, the kernel is always preemptive. * @note Disabling the round robin preemption makes the kernel more compact * and generally faster. * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ #define CH_CFG_TIME_QUANTUM 0 /** * @brief Managed RAM size. * @details Size of the RAM area to be managed by the OS. If set to zero * then the whole available RAM is used. The core memory is made * available to the heap allocator and/or can be used directly through * the simplified core memory allocator. * * @note In order to let the OS manage the whole RAM the linker script must * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ #define CH_CFG_MEMCORE_SIZE 0 /** * @brief Idle thread automatic spawn suppression. * @details When this option is activated the function @p chSysInit() * does not spawn the idle thread. The application @p main() * function becomes the idle thread and must implement an * infinite loop. */ #define CH_CFG_NO_IDLE_THREAD FALSE /** @} */ /*===========================================================================*/ /** * @name Performance options * @{ */ /*===========================================================================*/ /** * @brief OS optimization. * @details If enabled then time efficient rather than space efficient code * is used when two possible implementations exist. * * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ #define CH_CFG_OPTIMIZE_SPEED TRUE /** @} */ /*===========================================================================*/ /** * @name Subsystem options * @{ */ /*===========================================================================*/ /** * @brief Time Measurement APIs. * @details If enabled then the time measurement APIs are included in * the kernel. * * @note The default is @p TRUE. */ #define CH_CFG_USE_TM TRUE /** * @brief Threads registry APIs. * @details If enabled then the registry APIs are included in the kernel. * * @note The default is @p TRUE. */ #define CH_CFG_USE_REGISTRY TRUE /** * @brief Threads synchronization APIs. * @details If enabled then the @p chThdWait() function is included in * the kernel. * * @note The default is @p TRUE. */ #define CH_CFG_USE_WAITEXIT TRUE /** * @brief Semaphores APIs. * @details If enabled then the Semaphores APIs are included in the kernel. * * @note The default is @p TRUE. */ #define CH_CFG_USE_SEMAPHORES TRUE /** * @brief Semaphores queuing mode. * @details If enabled then the threads are enqueued on semaphores by * priority rather than in FIFO order. * * @note The default is @p FALSE. Enable this if you have special * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE /** * @brief Mutexes APIs. * @details If enabled then the mutexes APIs are included in the kernel. * * @note The default is @p TRUE. */ #define CH_CFG_USE_MUTEXES TRUE /** * @brief Enables recursive behavior on mutexes. * @note Recursive mutexes are heavier and have an increased * memory footprint. * * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE /** * @brief Conditional Variables APIs. * @details If enabled then the conditional variables APIs are included * in the kernel. * * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ #define CH_CFG_USE_CONDVARS TRUE /** * @brief Conditional Variables APIs with timeout. * @details If enabled then the conditional variables APIs with timeout * specification are included in the kernel. * * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ #define CH_CFG_USE_CONDVARS_TIMEOUT TRUE /** * @brief Events Flags APIs. * @details If enabled then t
/*
LUFA Library
Copyright (C) Dean Camera, 2017.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
/** \file
*
* Header file for TempDataLogger.c.
*/
#ifndef _TEMP_DATALOGGER_H_
#define _TEMP_DATALOGGER_H_
/* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <stdio.h>
#include "Descriptors.h"
#include "Lib/SCSI.h"
#include "Lib/DataflashManager.h"
#include "Lib/FATFs/ff.h"
#include "Lib/RTC.h"
#include "Config/AppConfig.h"
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Temperature.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
#define LEDMASK_USB_NOTREADY LEDS_LED1
/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
#define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
#define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
#define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
#define LEDMASK_USB_BUSY LEDS_LED2
/** Default log interval when the EEPROM is blank, in 500ms ticks. */
#define DEFAULT_LOG_INTERVAL 10
/** Indicates if the disk is write protected or not. */
#define DISK_READ_ONLY false
/* Type Defines: */
typedef struct
{
TimeDate_t TimeDate;
uint8_t LogInterval500MS;
} Device_Report_t;
/* Function Prototypes: */
void SetupHardware(void);
void OpenLogFile(void);
void CloseLogFile(void);
void EVENT_USB_Device_Connect(void);
void EVENT_USB_Device_Disconnect(void);
void EVENT_USB_Device_ConfigurationChanged(void);
void EVENT_USB_Device_ControlRequest(void);
bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo);
bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
uint8_t* const ReportID,
const uint8_t ReportType,
void* ReportData,
uint16_t* const ReportSize);
void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
const uint8_t ReportID,
const uint8_t ReportType,
const void* ReportData,
const uint16_t ReportSize);
#endif