diff options
-rw-r--r-- | Bootloaders/CDC/makefile | 6 | ||||
-rw-r--r-- | Bootloaders/DFU/BootloaderDFU.c | 4 | ||||
-rw-r--r-- | Bootloaders/DFU/makefile | 6 | ||||
-rw-r--r-- | LUFA/ManPages/LUFAPoweredProjects.txt | 1 | ||||
-rw-r--r-- | LUFA/ManPages/MigrationInformation.txt | 2 |
5 files changed, 12 insertions, 7 deletions
diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 3e43a168d..3b2e2db0b 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -86,11 +86,13 @@ F_CLOCK = $(F_CPU) # Starting byte address of the bootloader, as a byte address - computed via the formula -# BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024) +# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024) # # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. -BOOT_START = 0x1E000 +FLASH_SIZE_KB = 128 +BOOT_SECTION_SIZE_KB = 4 +BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc) # Output format. (can be srec, ihex, binary) diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c index 2f5abba5c..41b3e37ba 100644 --- a/Bootloaders/DFU/BootloaderDFU.c +++ b/Bootloaders/DFU/BootloaderDFU.c @@ -38,9 +38,9 @@ /** Flag to indicate if the bootloader is currently running in secure mode, disallowing memory operations * other than erase. This is initially set to the value set by SECURE_MODE, and cleared by the bootloader - * once a memory erase has completed. + * once a memory erase has completed in a bootloader session. */ -bool IsSecure = SECURE_MODE; +bool IsSecure = SECURE_MODE; /** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run * via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 061fb39b2..bcb908b1b 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -86,11 +86,13 @@ F_CLOCK = $(F_CPU) # Starting byte address of the bootloader, as a byte address - computed via the formula -# BOOT_START = ((TOTAL_FLASH_BYTES - BOOTLOADER_SECTION_SIZE_BYTES) * 1024) +# BOOT_START = ((FLASH_SIZE_KB - BOOT_SECTION_SIZE_KB) * 1024) # # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. -BOOT_START = 0x1E000 +FLASH_SIZE_KB = 128 +BOOT_SECTION_SIZE_KB = 4 +BOOT_START = 0x$(shell echo "obase=16; ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024" | bc) # Output format. (can be srec, ihex, binary) diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt index b8aa0e9c3..767e3b0cb 100644 --- a/LUFA/ManPages/LUFAPoweredProjects.txt +++ b/LUFA/ManPages/LUFAPoweredProjects.txt @@ -58,6 +58,7 @@ * - MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster * - Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3 * - Moco, a native Arduino Uno MIDI replacement firmware: http://web.mac.com/kuwatay/morecat_lab./MocoLUFA.html + * - Music Playing Alarm Clock (Tutorial): http://www.instructables.com/id/Music-Playing-Alarm-Clock/ * - NeroJTAG, a JTAG dongle: https://github.com/makestuff/neroJtag * - NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm * - Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/ diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt index 25669400f..a85d63f17 100644 --- a/LUFA/ManPages/MigrationInformation.txt +++ b/LUFA/ManPages/MigrationInformation.txt @@ -199,7 +199,7 @@ * \section Sec_Migration090924 Migrating from 090810 to 090924 * * <b>Non-USB Library Components</b> - * - The \c ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library. + * - The \c ADC_Off() function has been renamed to \c ADC_ShutDown() to be consistent with the rest of the library. * - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See * the \ref SPI_Init() function documentation for more details * - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a |