1 files changed, 0 insertions, 72 deletions
diff --git a/Bootloaders/TeensyHID/TeensyHID.txt b/Bootloaders/TeensyHID/TeensyHID.txt
deleted file mode 100644
index adc541254..000000000
--- a/Bootloaders/TeensyHID/TeensyHID.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
- 
-/** \mainpage Teensy HID Class USB AVR Bootloader
- *
- *  \section SSec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  - AT90USB162 (Teensy 1.0)
- *  - AT90USB646 (Teensy++ 1.0)
- *  - ATMEGA32U4 (Teensy 2.0)
- *  - AT90USB1286 (Teensy++ 2.0)
- *
- *  \section SSec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- * <table>
- *  <tr>
- *   <td><b>USB Mode:</b></td>
- *   <td>Device</td>
- *  </tr>
- *  <tr>
- *   <td><b>USB Class:</b></td>
- *   <td>Human Interface Device Class (HID)</td>
- *  </tr>
- *  <tr> 
- *   <td><b>USB Subclass:</b></td>
- *   <td>N/A</td>
- *  </tr>
- *  <tr>
- *   <td><b>Relevant Standards:</b></td>
- *   <td>USBIF HID Class Standard \n
- *       Teensy Programming Protocol Specification</td>
- *  </tr>
- *  <tr>
- *   <td><b>Usable Speeds:</b></td>
- *   <td>Low Speed Mode \n
- *       Full Speed Mode</td>
- *  </tr>
- * </table>
- *
- *  \section SSec_Description Project Description: 
- *
- * This bootloader enumerates to the host as a HID Class device, allowing for Teensy compatible programming
- * software to load firmware onto the AVR, such as the official software at <a>http://www.pjrc.com/teensy/</a>.
- *  
- * Out of the box this bootloader builds for the ATMEGA32U4, and will fit into 2-4KB of bootloader space. For other
- * devices, the makefile will need to be updated to reflect the altered MCU model and bootloader start address. When
- * calculating the bootloader start address, use (TARGET_FLASH_SIZE_BYTES - 4096) for targets where the bootloader
- * compiles larger than 2KB, or (TARGET_FLASH_SIZE_BYTES - 2048) for smaller targets where the bootloader compiles
- * under 2KB.
- *
- * This spoofs (with permission) the official Teensy bootloader's VID and PID, so that the software remains
- * compatible with no changes.
- *
- *  \section SSec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td>
- *     None
- *    </td>
- *   </tr>
- *  </table>
- */