1 files changed, 121 insertions, 121 deletions
diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
index b897f1bb5..2175ecb7f 100644
--- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
+++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt
@@ -1,122 +1,122 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
- 
-/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
- *
- *  \section SSec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  - Series 7 USB AVRs
- *  - Series 6 USB AVRs
- *
- *  \section SSec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC)</td>
- *   </tr>
- *   <tr> 
- *    <td><b>USB Subclass:</b></td>
- *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>Microsoft RNDIS Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Usable Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section SSec_Description Project Description: 
- *
- *  Remote Network Driver Interface demonstration application.
- *  This gives a simple reference application for implementing
- *  a CDC RNDIS device acting as a simple network interface for
- *  ethernet packet exchange. RNDIS is a proprietary Microsoft
- *  standard; this demo will only work on Windows 2000 (manually
- *  patched with the Microsoft RNDIS hotfix) and above (with no
- *  manual patches), or on the latest Linux kernels.
- *  
- *  Before running, you will need to install the INF file that
- *  is located in the RNDISEthernet project directory. This will
- *  enable Windows to use its inbuilt RNDIS drivers, negating the
- *  need for special Windows drivers for the device. To install,
- *  right-click the .INF file and choose the Install option. If
- *  Windows 2000 is used, the Microsoft INF file in the hotfix
- *  will need to be altered to use the VID/PID of the demo and
- *  then chosen instead of the LUFA RNDIS INF file when prompted.
- *  
- *  When enumerated, this demo will install as a new network
- *  adapter which ethernet packets can be sent to and received
- *  from. Running on top of the adapter is a very simple TCP/IP
- *  stack with a HTTP webserver and TELNET host which can be
- *  accessed through a web browser at IP address 10.0.0.2:80 or
- *  through a TELNET client at 10.0.0.2:25. This device also supports
- *  ping echos via the ICMP protocol.
- *  
- *  \note The TCP/IP stack in this demo has a number of limitations
- *  and should serve as an example only - it is not fully featured nor
- *  compliant to the TCP/IP specification. For complete projects, it is 
- *  recommended that it be replaced with an external open source TCP/IP
- *  stack that is feature complete, such as the uIP stack.
- *
- *  \section SSec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ETHERNET</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ARP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_IP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_ICMP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_TCP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_UDP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *   <tr>
- *    <td>NO_DECODE_DHCP</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
- *   </tr>
- *  </table>
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
+ *
+ *  \section SSec_Compat Demo Compatibility:
+ *
+ *  The following list indicates what microcontrollers are compatible with this demo.
+ *
+ *  - Series 7 USB AVRs
+ *  - Series 6 USB AVRs
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>USB Mode:</b></td>
+ *    <td>Device</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>USB Class:</b></td>
+ *    <td>Communications Device Class (CDC)</td>
+ *   </tr>
+ *   <tr> 
+ *    <td><b>USB Subclass:</b></td>
+ *    <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Relevant Standards:</b></td>
+ *    <td>Microsoft RNDIS Specification</td>
+ *   </tr>
+ *   <tr>
+ *    <td><b>Usable Speeds:</b></td>
+ *    <td>Full Speed Mode</td>
+ *   </tr>
+ *  </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  Remote Network Driver Interface demonstration application.
+ *  This gives a simple reference application for implementing
+ *  a CDC RNDIS device acting as a simple network interface for
+ *  ethernet packet exchange. RNDIS is a proprietary Microsoft
+ *  standard; this demo will only work on Windows 2000 (manually
+ *  patched with the Microsoft RNDIS hotfix) and above (with no
+ *  manual patches), or on the latest Linux kernels.
+ *  
+ *  Before running, you will need to install the INF file that
+ *  is located in the RNDISEthernet project directory. This will
+ *  enable Windows to use its inbuilt RNDIS drivers, negating the
+ *  need for special Windows drivers for the device. To install,
+ *  right-click the .INF file and choose the Install option. If
+ *  Windows 2000 is used, the Microsoft INF file in the hotfix
+ *  will need to be altered to use the VID/PID of the demo and
+ *  then chosen instead of the LUFA RNDIS INF file when prompted.
+ *  
+ *  When enumerated, this demo will install as a new network
+ *  adapter which ethernet packets can be sent to and received
+ *  from. Running on top of the adapter is a very simple TCP/IP
+ *  stack with a HTTP webserver and TELNET host which can be
+ *  accessed through a web browser at IP address 10.0.0.2:80 or
+ *  through a TELNET client at 10.0.0.2:25. This device also supports
+ *  ping echos via the ICMP protocol.
+ *  
+ *  \note The TCP/IP stack in this demo has a number of limitations
+ *  and should serve as an example only - it is not fully featured nor
+ *  compliant to the TCP/IP specification. For complete projects, it is 
+ *  recommended that it be replaced with an external open source TCP/IP
+ *  stack that is feature complete, such as the uIP stack.
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ETHERNET</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ARP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_IP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_ICMP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_TCP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_UDP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>NO_DECODE_DHCP</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
+ *   </tr>
+ *  </table>
  */
 \ No newline at end of file