diff options
Diffstat (limited to 'Demos/Device/LowLevel')
18 files changed, 84 insertions, 84 deletions
diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index 149f8360a..f03a7229f 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c index db6bc3c75..f2a8867b7 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c @@ -99,7 +99,7 @@ void EVENT_USB_Device_Connect(void) /* PWM speaker timer initialization */ TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0) | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP - TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, Fcpu speed + TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed #endif } diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index f92c91ac2..8aa94ddff 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -63,7 +63,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt index f21bd0c73..5452a07fb 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt @@ -73,7 +73,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> @@ -82,4 +82,4 @@ * </td> * </tr> * </table> - */
\ No newline at end of file + */ diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index 022ce5b5a..e466c0d17 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -57,7 +57,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/Joystick/Joystick.txt b/Demos/Device/LowLevel/Joystick/Joystick.txt index 994aac435..1e885830f 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.txt +++ b/Demos/Device/LowLevel/Joystick/Joystick.txt @@ -61,7 +61,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> @@ -70,4 +70,4 @@ * </td> * </tr> * </table> - */
\ No newline at end of file + */ diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/Demos/Device/LowLevel/Keyboard/Keyboard.txt index 04012222c..7ac8f6526 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.txt +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.txt @@ -55,12 +55,12 @@ * when the USB connection to a host is present. To use the keyboard example, * manipulate the joystick to send the letters a, b, c, d and e. See the USB HID * documentation for more information on sending keyboard event and key presses. Unlike - * other LUFA Keyboard demos, this example shows explicitly how to send multiple keypresses + * other LUFA Keyboard demos, this example shows explicitly how to send multiple key presses * inside the same report to the host. * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index 03d6799f5..ae0ee30b6 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -197,7 +197,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /** Processes a given Keyboard LED report from the host, and sets the board LEDs to match. Since the Keyboard * LED report can be sent through either the control endpoint (via a HID SetReport request) or the HID OUT * endpoint, the processing code is placed here to avoid duplicating it and potentially having different - * behaviour depending on the method used to sent it. + * behavior depending on the method used to sent it. */ void Keyboard_ProcessLEDReport(const uint8_t LEDStatus) { diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt index 6f24efe53..dc94b5b8d 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt @@ -65,7 +65,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/MIDI/MIDI.txt b/Demos/Device/LowLevel/MIDI/MIDI.txt index 56aeec419..1d9fd209f 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.txt +++ b/Demos/Device/LowLevel/MIDI/MIDI.txt @@ -62,7 +62,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c index 07926ccd0..e32618258 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c @@ -30,7 +30,7 @@ /** \file * - * Functions to manage the physical dataflash media, including reading and writing of + * Functions to manage the physical Dataflash media, including reading and writing of * blocks of data. These functions are called by the SCSI layer when data must be stored * or retrieved to/from the physical storage media. If a different media is used (such * as a SD card or EEPROM), functions similar to these will need to be generated. @@ -39,9 +39,9 @@ #define INCLUDE_FROM_DATAFLASHMANAGER_C #include "DataflashManager.h" -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from +/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes - * them to the dataflash in Dataflash page sized blocks. + * them to the Dataflash in Dataflash page sized blocks. * * \param[in] BlockAddress Data block starting address for the write sequence * \param[in] TotalBlocks Number of blocks of data to write @@ -58,13 +58,13 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, Dataflash_SelectChipFromPage(CurrDFPage); #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the dataflash buffer */ + /* Copy selected dataflash's current page contents to the Dataflash buffer */ Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); Dataflash_SendAddressBytes(CurrDFPage, 0); Dataflash_WaitWhileBusy(); #endif - /* Send the dataflash buffer write command */ + /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); @@ -76,7 +76,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, { uint8_t BytesInBlockDiv16 = 0; - /* Write an endpoint packet sized data block to the dataflash */ + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { /* Check if the endpoint is currently empty */ @@ -90,30 +90,30 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, return; } - /* Check if end of dataflash page reached */ + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { - /* Write the dataflash buffer contents back to the dataflash page */ + /* Write the Dataflash buffer contents back to the Dataflash page */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); Dataflash_SendAddressBytes(CurrDFPage, 0); - /* Reset the dataflash buffer counter, increment the page counter */ + /* Reset the Dataflash buffer counter, increment the page counter */ CurrDFPageByteDiv16 = 0; CurrDFPage++; - /* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ + /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) UsingSecondBuffer = !(UsingSecondBuffer); - /* Select the next dataflash chip based on the new dataflash page index */ + /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */ + /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) { - /* Copy selected dataflash's current page contents to the dataflash buffer */ + /* Copy selected dataflash's current page contents to the Dataflash buffer */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -121,12 +121,12 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, } #endif - /* Send the dataflash buffer write command */ + /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - /* Write one 16-byte chunk of data to the dataflash */ + /* Write one 16-byte chunk of data to the Dataflash */ Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); @@ -144,7 +144,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - /* Increment the dataflash page 16 byte block counter */ + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ @@ -159,7 +159,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, TotalBlocks--; } - /* Write the dataflash buffer contents back to the dataflash page */ + /* Write the Dataflash buffer contents back to the Dataflash page */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); Dataflash_SendAddressBytes(CurrDFPage, 0x00); @@ -169,11 +169,11 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearOUT(); - /* Deselect all dataflash chips */ + /* Deselect all Dataflash chips */ Dataflash_DeselectChip(); } -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into +/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash * and writes them in OS sized blocks to the endpoint. * @@ -190,7 +190,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, /* Select the correct starting Dataflash IC for the block requested */ Dataflash_SelectChipFromPage(CurrDFPage); - /* Send the dataflash main memory page read command */ + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); Dataflash_SendByte(0x00); @@ -206,7 +206,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, { uint8_t BytesInBlockDiv16 = 0; - /* Write an endpoint packet sized data block to the dataflash */ + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { /* Check if the endpoint is currently full */ @@ -220,17 +220,17 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, return; } - /* Check if end of dataflash page reached */ + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { - /* Reset the dataflash buffer counter, increment the page counter */ + /* Reset the Dataflash buffer counter, increment the page counter */ CurrDFPageByteDiv16 = 0; CurrDFPage++; - /* Select the next dataflash chip based on the new dataflash page index */ + /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - /* Send the dataflash main memory page read command */ + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); Dataflash_SendByte(0x00); @@ -239,7 +239,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, Dataflash_SendByte(0x00); } - /* Read one 16-byte chunk of data from the dataflash */ + /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -257,7 +257,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - /* Increment the dataflash page 16 byte block counter */ + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ @@ -276,14 +276,14 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); - /* Deselect all dataflash chips */ + /* Deselect all Dataflash chips */ Dataflash_DeselectChip(); } -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board dataflash IC(s), from +/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from * the a given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the - * dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the - * dataflash. + * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the + * Dataflash. * * \param[in] BlockAddress Data block starting address for the write sequence * \param[in] TotalBlocks Number of blocks of data to write @@ -302,13 +302,13 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SelectChipFromPage(CurrDFPage); #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the dataflash buffer */ + /* Copy selected dataflash's current page contents to the Dataflash buffer */ Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); Dataflash_SendAddressBytes(CurrDFPage, 0); Dataflash_WaitWhileBusy(); #endif - /* Send the dataflash buffer write command */ + /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); @@ -316,33 +316,33 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, { uint8_t BytesInBlockDiv16 = 0; - /* Write an endpoint packet sized data block to the dataflash */ + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { - /* Check if end of dataflash page reached */ + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { - /* Write the dataflash buffer contents back to the dataflash page */ + /* Write the Dataflash buffer contents back to the Dataflash page */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); Dataflash_SendAddressBytes(CurrDFPage, 0); - /* Reset the dataflash buffer counter, increment the page counter */ + /* Reset the Dataflash buffer counter, increment the page counter */ CurrDFPageByteDiv16 = 0; CurrDFPage++; - /* Once all the dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ + /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) UsingSecondBuffer = !(UsingSecondBuffer); - /* Select the next dataflash chip based on the new dataflash page index */ + /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); #if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one dataflash page remaining, copy over the existing page to preserve trailing data */ + /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) { - /* Copy selected dataflash's current page contents to the dataflash buffer */ + /* Copy selected dataflash's current page contents to the Dataflash buffer */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -350,17 +350,17 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, } #endif - /* Send the dataflash buffer write command */ + /* Send the Dataflash buffer write command */ Dataflash_ToggleSelectedChipCS(); Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - /* Write one 16-byte chunk of data to the dataflash */ + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - /* Increment the dataflash page 16 byte block counter */ + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ @@ -371,20 +371,20 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, TotalBlocks--; } - /* Write the dataflash buffer contents back to the dataflash page */ + /* Write the Dataflash buffer contents back to the Dataflash page */ Dataflash_WaitWhileBusy(); Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); Dataflash_SendAddressBytes(CurrDFPage, 0x00); Dataflash_WaitWhileBusy(); - /* Deselect all dataflash chips */ + /* Deselect all Dataflash chips */ Dataflash_DeselectChip(); } -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board dataflash IC(s), into +/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into * the a preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read - * the files stored on the dataflash. + * the files stored on the Dataflash. * * \param[in] BlockAddress Data block starting address for the read sequence * \param[in] TotalBlocks Number of blocks of data to read @@ -401,7 +401,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the correct starting Dataflash IC for the block requested */ Dataflash_SelectChipFromPage(CurrDFPage); - /* Send the dataflash main memory page read command */ + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); Dataflash_SendByte(0x00); @@ -413,20 +413,20 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, { uint8_t BytesInBlockDiv16 = 0; - /* Write an endpoint packet sized data block to the dataflash */ + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { - /* Check if end of dataflash page reached */ + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { - /* Reset the dataflash buffer counter, increment the page counter */ + /* Reset the Dataflash buffer counter, increment the page counter */ CurrDFPageByteDiv16 = 0; CurrDFPage++; - /* Select the next dataflash chip based on the new dataflash page index */ + /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - /* Send the dataflash main memory page read command */ + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); Dataflash_SendByte(0x00); @@ -435,11 +435,11 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); } - /* Read one 16-byte chunk of data from the dataflash */ + /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - /* Increment the dataflash page 16 byte block counter */ + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ @@ -450,14 +450,14 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, TotalBlocks--; } - /* Deselect all dataflash chips */ + /* Deselect all Dataflash chips */ Dataflash_DeselectChip(); } -/** Disables the dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ +/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ void DataflashManager_ResetDataflashProtections(void) { - /* Select first dataflash chip, send the read status register command */ + /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); @@ -473,7 +473,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - /* Select second dataflash chip (if present on selected board), send read status register command */ + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); @@ -491,7 +491,7 @@ void DataflashManager_ResetDataflashProtections(void) } #endif - /* Deselect current dataflash chip */ + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h index 7a62ace04..cb613f42c 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h @@ -52,7 +52,7 @@ #endif /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */ + /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */ #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c index d718e7eea..4d2323e0d 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c @@ -245,7 +245,7 @@ static void SCSI_Command_Send_Diagnostic(void) } /** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address - * and total number of blocks to process, then calls the appropriate low-level dataflash routine to handle the actual + * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual * reading and writing of the data. * * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 3489ca033..7c54c3b9f 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -74,7 +74,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt index faa4a4b29..86c149f2b 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.txt +++ b/Demos/Device/LowLevel/Mouse/Mouse.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h index 4b83b42cb..17a34ace7 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h @@ -131,7 +131,7 @@ uint32_t AFListSize; } RNDIS_Initialize_Complete_t; - /** Type define for a RNDIS Keepalive command message. */ + /** Type define for a RNDIS Keep-alive command message. */ typedef struct { uint32_t MessageType; @@ -139,7 +139,7 @@ uint32_t RequestId; } RNDIS_KeepAlive_Message_t; - /** Type define for a RNDIS Keepalive complete message. */ + /** Type define for a RNDIS Keep-alive complete message. */ typedef struct { uint32_t MessageType; diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index ab325ca00..02874f572 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -75,7 +75,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> @@ -119,4 +119,4 @@ * <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td> * </tr> * </table> - */
\ No newline at end of file + */ diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt index a551379c3..ad86cbb02 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt @@ -60,7 +60,7 @@ * * \section SSec_Options Project Options * - * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * The following defines can be found in this demo, which can control the demo behavior when defined, or changed in value. * * <table> * <tr> @@ -69,4 +69,4 @@ * </td> * </tr> * </table> - */
\ No newline at end of file + */ |