diff options
Diffstat (limited to 'Demos/Device/LowLevel')
-rw-r--r-- | Demos/Device/LowLevel/AudioInput/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/AudioOutput/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/DualVirtualSerial/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/GenericHID/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/Joystick/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/Keyboard/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/KeyboardMouse/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/MIDI/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/MassStorage/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/Mouse/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/RNDISEthernet/makefile | 6 | ||||
-rw-r--r-- | Demos/Device/LowLevel/VirtualSerial/makefile | 6 |
12 files changed, 36 insertions, 36 deletions
diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 86bc0948c..3e4273a73 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -522,7 +522,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index bf189c309..86bb0b791 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -524,7 +524,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index fbd5d459b..40b5a2c2f 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 9fa56a550..be6da3c6b 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 553a89aee..49697f7ab 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index a7fcdbb2c..3794c5088 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index d59329848..dcd70e04b 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 784709d4a..45a8c06be 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 9f740fb3b..b55334b92 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -523,7 +523,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index af82d9aaf..99467e769 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 0bb88470e..ed17d3662 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -541,7 +541,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index dacd22e8d..89ad42ca4 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -66,7 +66,7 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring # LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. -BOARD = USBKEY +BOARD = USBKEY # Processor frequency. @@ -521,7 +521,7 @@ flip: $(TARGET).hex dfu: $(TARGET).hex dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex + dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex dfu-programmer $(MCU) reset flip-ee: $(TARGET).hex $(TARGET).eep @@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep $(REMOVE) $(TARGET)eep.hex dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep dfu-programmer $(MCU) reset |