diff options
Diffstat (limited to 'Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt')
-rw-r--r-- | Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt | 156 |
1 files changed, 78 insertions, 78 deletions
diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt index 7004053c4..0faeedc5c 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt @@ -1,78 +1,78 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Audio Output Host Demo
- *
- * \section Sec_Compat Demo Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this demo.
- *
- * - Series 7 USB AVRs (AT90USBxxx7)
- *
- * \section Sec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this demo.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Host</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Audio Class</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>Standard Audio Device</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF Audio 1.0 Class Specification \n
- * USBIF Audio 1.0 Class Terminal Types Specification \n
- * USBIF Audio 1.0 Data Formats Specification</td>
- * </tr>
- * <tr>
- * <td><b>Usable Speeds:</b></td>
- * <td>Full Speed Mode</td>
- * </tr>
- * </table>
- *
- * \section Sec_Description Project Description:
- *
- * Audio Output host demonstration application. This gives a simple reference
- * application for implementing a USB Audio host, for USB Audio devices using
- * the USB Audio 1.0 class profile.
- *
- * By default, the demo will produce a square wave test tone when the board
- * button is pressed. If USE_TEST_TONE is not defined in the project makefile,
- * incoming audio from the ADC channel 1 will be sampled and sent to the attached
- * USB audio device instead.
- *
- * \section Sec_Options Project Options
- *
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- * <table>
- * <tr>
- * <td><b>Define Name:</b></td>
- * <td><b>Location:</b></td>
- * <td><b>Description:</b></td>
- * </tr>
- * <tr>
- * <td>USE_TEST_TONE</td>
- * <td>Makefile LUFA_OPTS</td>
- * <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed
- * instead of sampling the board microphone.</td>
- * </tr>
- * <tr>
- * <td>MICROPHONE_BIASED_TO_HALF_RAIL</td>
- * <td>Makefile LUFA_OPTS</td>
- * <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td>
- * </tr>
- * </table>
- */
-
+/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Audio Output Host Demo + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * - Series 7 USB AVRs (AT90USBxxx7) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Host</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Audio Class</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Standard Audio Device</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF Audio 1.0 Class Specification \n + * USBIF Audio 1.0 Class Terminal Types Specification \n + * USBIF Audio 1.0 Data Formats Specification</td> + * </tr> + * <tr> + * <td><b>Usable Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * Audio Output host demonstration application. This gives a simple reference + * application for implementing a USB Audio host, for USB Audio devices using + * the USB Audio 1.0 class profile. + * + * By default, the demo will produce a square wave test tone when the board + * button is pressed. If USE_TEST_TONE is not defined in the project makefile, + * incoming audio from the ADC channel 1 will be sampled and sent to the attached + * USB audio device instead. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td><b>Define Name:</b></td> + * <td><b>Location:</b></td> + * <td><b>Description:</b></td> + * </tr> + * <tr> + * <td>USE_TEST_TONE</td> + * <td>Makefile LUFA_OPTS</td> + * <td>When defined, this alters the demo to produce a square wave test tone when the first board button is pressed + * instead of sampling the board microphone.</td> + * </tr> + * <tr> + * <td>MICROPHONE_BIASED_TO_HALF_RAIL</td> + * <td>Makefile LUFA_OPTS</td> + * <td>When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted.</td> + * </tr> + * </table> + */ + |