1 files changed, 375 insertions, 375 deletions
diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c
index 2daf3ef4b..686eb5ff4 100644
--- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c
+++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c
@@ -1,375 +1,375 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2010.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this 
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the StillImageHost demo. This file contains the main tasks of
- *  the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "StillImageHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- *  enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
-	SetupHardware();
-
-	puts_P(PSTR(ESC_FG_CYAN "Still Image Host Demo running.\r\n" ESC_FG_WHITE));
-
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	sei();
-
-	for (;;)
-	{
-		StillImage_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable Clock Division */
-	CLKPR = (1 << CLKPCE);
-	CLKPR = 0;
-
-	/* Hardware Initialization */
-	SerialStream_Init(9600, false);
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- *  starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- *  stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
-	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- *  enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
-	USB_ShutDown();
-
-	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- *  enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
-{
-	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
-	                         " -- Error Code %d\r\n"
-	                         " -- Sub Error Code %d\r\n"
-	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-	
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated, and to print device information
- *  through the serial port.
- */
-void StillImage_Task(void)
-{
-	uint8_t ErrorCode;
-
-	switch (USB_HostState)
-	{
-		case HOST_STATE_Addressed:
-			puts_P(PSTR("Getting Config Data.\r\n"));
-		
-			/* Get and process the configuration descriptor data */
-			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
-			{
-				if (ErrorCode == ControlError)
-				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
-				else
-				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
-				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-				
-				/* Indicate error via status LEDs */
-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
-				/* Wait until USB device disconnected */
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-
-			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
-			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
-			{
-				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
-				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
-				/* Indicate error via status LEDs */
-				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
-				/* Wait until USB device disconnected */
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-				
-			puts_P(PSTR("Still Image Device Enumerated.\r\n"));
-			USB_HostState = HOST_STATE_Configured;
-			break;
-		case HOST_STATE_Configured:
-			/* Indicate device busy via the status LEDs */
-			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-			
-			puts_P(PSTR("Retrieving Device Info...\r\n"));
-			
-			PIMA_SendBlock = (PIMA_Container_t)
-				{
-					.DataLength    = PIMA_COMMAND_SIZE(0),
-					.Type          = CType_CommandBlock,
-					.Code          = PIMA_OPERATION_GETDEVICEINFO,
-					.TransactionID = 0x00000000,
-					.Params        = {},
-				};
-			
-			/* Send the GETDEVICEINFO block */
-			SImage_SendBlockHeader();
-			
-			/* Receive the response data block */
-			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-			{
-				ShowCommandError(ErrorCode, false);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-			
-			/* Calculate the size of the returned device info data structure */
-			uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
-			
-			/* Create a buffer large enough to hold the entire device info */
-			uint8_t DeviceInfo[DeviceInfoSize];
-
-			/* Read in the data block data (containing device info) */
-			SImage_ReadData(DeviceInfo, DeviceInfoSize);
-			
-			/* Once all the data has been read, the pipe must be cleared before the response can be sent */
-			Pipe_ClearIN();
-			
-			/* Create a pointer for walking through the info dataset */
-			uint8_t* DeviceInfoPos = DeviceInfo;
-			
-			/* Skip over the data before the unicode device information strings */
-			DeviceInfoPos +=  8;                                          // Skip to VendorExtensionDesc String
-			DeviceInfoPos += (1 + UNICODE_STRING_LENGTH(*DeviceInfoPos)); // Skip over VendorExtensionDesc String
-			DeviceInfoPos +=  2;                                          // Skip over FunctionalMode
-			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Operations Array
-			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Events Array
-			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Device Properties Array
-			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Capture Formats Array
-			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Image Formats Array
-			
-			/* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */
-			char Manufacturer[*DeviceInfoPos];
-			UnicodeToASCII(DeviceInfoPos, Manufacturer);
-			printf_P(PSTR("   Manufacturer: %s\r\n"), Manufacturer);
-
-			DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Manufacturer String
-
-			/* Extract and convert the Model Unicode string to ASCII and print it through the USART */
-			char Model[*DeviceInfoPos];
-			UnicodeToASCII(DeviceInfoPos, Model);
-			printf_P(PSTR("   Model: %s\r\n"), Model);
-
-			DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Model String
-
-			/* Extract and convert the Device Version Unicode string to ASCII and print it through the USART */
-			char DeviceVersion[*DeviceInfoPos];
-			UnicodeToASCII(DeviceInfoPos, DeviceVersion);
-			printf_P(PSTR("   Device Version: %s\r\n"), DeviceVersion);
-
-			/* Receive the final response block from the device */
-			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-			{
-				ShowCommandError(ErrorCode, false);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-			
-			/* Verify that the command completed successfully */
-			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-			{
-				ShowCommandError(PIMA_ReceivedBlock.Code, true);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-			
-			puts_P(PSTR("Opening Session...\r\n"));
-			
-			PIMA_SendBlock = (PIMA_Container_t)
-				{
-					.DataLength    = PIMA_COMMAND_SIZE(1),
-					.Type          = CType_CommandBlock,
-					.Code          = PIMA_OPERATION_OPENSESSION,
-					.TransactionID = 0x00000000,
-					.Params        = {0x00000001},
-				};
-			
-			/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
-			SImage_SendBlockHeader();
-			
-			/* Receive the response block from the device */
-			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-			{
-				ShowCommandError(ErrorCode, false);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-			
-			/* Verify that the command completed successfully */
-			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-			{
-				ShowCommandError(PIMA_ReceivedBlock.Code, true);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-
-			puts_P(PSTR("Closing Session...\r\n"));
-
-			PIMA_SendBlock = (PIMA_Container_t)
-				{
-					.DataLength    = PIMA_COMMAND_SIZE(1),
-					.Type          = CType_CommandBlock,
-					.Code          = PIMA_OPERATION_CLOSESESSION,
-					.TransactionID = 0x00000001,
-					.Params        = {0x00000001},
-				};
-			
-			/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
-			SImage_SendBlockHeader();
-			
-			/* Receive the response block from the device */
-			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
-			{
-				ShowCommandError(ErrorCode, false);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-
-			/* Verify that the command completed successfully */
-			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
-			{
-				ShowCommandError(PIMA_ReceivedBlock.Code, true);
-				
-				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-				break;
-			}
-
-			puts_P(PSTR("Done.\r\n"));
-
-			/* Indicate device no longer busy */
-			LEDs_SetAllLEDs(LEDMASK_USB_READY);
-			
-			USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-			break;
-	}
-}
-
-/** Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode
- *  strings which contain ASCII printable characters only.
- *
- *  \param[in] UnicodeString  Pointer to a Unicode encoded input string
- *  \param[out] Buffer        Pointer to a buffer where the converted ASCII string should be stored
- */
-void UnicodeToASCII(uint8_t* UnicodeString, char* Buffer)
-{
-	/* Get the number of characters in the string, skip to the start of the string data */
-	uint8_t CharactersRemaining = *(UnicodeString++);
-	
-	/* Loop through the entire unicode string */
-	while (CharactersRemaining--)
-	{
-		/* Load in the next unicode character (only the lower byte, as only Unicode coded ASCII is supported) */
-		*(Buffer++) = *UnicodeString;
-		
-		/* Jump to the next unicode character */
-		UnicodeString += 2;
-	}
-	
-	/* Null terminate the string */
-	*Buffer = 0;
-}
-
-/** Displays a PIMA command error via the device's serial port.
- *
- *  \param[in] ErrorCode          Error code of the function which failed to complete successfully
- *  \param[in] ResponseCodeError  Indicates if the error is due to a command failed indication from the device, or a communication failure
- */
-void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)
-{
-	char* FailureType = ((ResponseCodeError) ? PSTR("Response Code != OK") : PSTR("Transaction Fail"));
-
-	printf_P(PSTR(ESC_FG_RED "Command Error (%S).\r\n"
-	                         " -- Error Code %d\r\n" ESC_FG_WHITE), FailureType, ErrorCode);
-			
-	/* Indicate error via status LEDs */
-	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Main source file for the StillImageHost demo. This file contains the main tasks of
+ *  the demo and is responsible for the initial application hardware configuration.
+ */
+
+#include "StillImageHost.h"
+
+/** Main program entry point. This routine configures the hardware required by the application, then
+ *  enters a loop to run the application tasks in sequence.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	puts_P(PSTR(ESC_FG_CYAN "Still Image Host Demo running.\r\n" ESC_FG_WHITE));
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	sei();
+
+	for (;;)
+	{
+		StillImage_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable Clock Division */
+	CLKPR = (1 << CLKPCE);
+	CLKPR = 0;
+
+	/* Hardware Initialization */
+	SerialStream_Init(9600, false);
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Host_DeviceAttached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
+ *  stops the library USB task management process.
+ */
+void EVENT_USB_Host_DeviceUnattached(void)
+{
+	puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
+ *  enumerated by the host and is now ready to be used by the application.
+ */
+void EVENT_USB_Host_DeviceEnumerationComplete(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_READY);
+}
+
+/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
+{
+	USB_ShutDown();
+
+	printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+	for(;;);
+}
+
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
+ *  enumerating an attached USB device.
+ */
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
+{
+	printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
+	                         " -- Error Code %d\r\n"
+	                         " -- Sub Error Code %d\r\n"
+	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
+	
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}
+
+/** Task to set the configuration of the attached device after it has been enumerated, and to print device information
+ *  through the serial port.
+ */
+void StillImage_Task(void)
+{
+	uint8_t ErrorCode;
+
+	switch (USB_HostState)
+	{
+		case HOST_STATE_Addressed:
+			puts_P(PSTR("Getting Config Data.\r\n"));
+		
+			/* Get and process the configuration descriptor data */
+			if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
+			{
+				if (ErrorCode == ControlError)
+				  puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
+				else
+				  puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
+
+				printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+				
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
+			if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
+			{
+				printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
+				                         " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
+
+				/* Indicate error via status LEDs */
+				LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+
+				/* Wait until USB device disconnected */
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+				
+			puts_P(PSTR("Still Image Device Enumerated.\r\n"));
+			USB_HostState = HOST_STATE_Configured;
+			break;
+		case HOST_STATE_Configured:
+			/* Indicate device busy via the status LEDs */
+			LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+			
+			puts_P(PSTR("Retrieving Device Info...\r\n"));
+			
+			PIMA_SendBlock = (PIMA_Container_t)
+				{
+					.DataLength    = PIMA_COMMAND_SIZE(0),
+					.Type          = CType_CommandBlock,
+					.Code          = PIMA_OPERATION_GETDEVICEINFO,
+					.TransactionID = 0x00000000,
+					.Params        = {},
+				};
+			
+			/* Send the GETDEVICEINFO block */
+			SImage_SendBlockHeader();
+			
+			/* Receive the response data block */
+			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
+			{
+				ShowCommandError(ErrorCode, false);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Calculate the size of the returned device info data structure */
+			uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0));
+			
+			/* Create a buffer large enough to hold the entire device info */
+			uint8_t DeviceInfo[DeviceInfoSize];
+
+			/* Read in the data block data (containing device info) */
+			SImage_ReadData(DeviceInfo, DeviceInfoSize);
+			
+			/* Once all the data has been read, the pipe must be cleared before the response can be sent */
+			Pipe_ClearIN();
+			
+			/* Create a pointer for walking through the info dataset */
+			uint8_t* DeviceInfoPos = DeviceInfo;
+			
+			/* Skip over the data before the unicode device information strings */
+			DeviceInfoPos +=  8;                                          // Skip to VendorExtensionDesc String
+			DeviceInfoPos += (1 + UNICODE_STRING_LENGTH(*DeviceInfoPos)); // Skip over VendorExtensionDesc String
+			DeviceInfoPos +=  2;                                          // Skip over FunctionalMode
+			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Operations Array
+			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Events Array
+			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Supported Device Properties Array
+			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Capture Formats Array
+			DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1));      // Skip over Image Formats Array
+			
+			/* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */
+			char Manufacturer[*DeviceInfoPos];
+			UnicodeToASCII(DeviceInfoPos, Manufacturer);
+			printf_P(PSTR("   Manufacturer: %s\r\n"), Manufacturer);
+
+			DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Manufacturer String
+
+			/* Extract and convert the Model Unicode string to ASCII and print it through the USART */
+			char Model[*DeviceInfoPos];
+			UnicodeToASCII(DeviceInfoPos, Model);
+			printf_P(PSTR("   Model: %s\r\n"), Model);
+
+			DeviceInfoPos += 1 + UNICODE_STRING_LENGTH(*DeviceInfoPos);   // Skip over Model String
+
+			/* Extract and convert the Device Version Unicode string to ASCII and print it through the USART */
+			char DeviceVersion[*DeviceInfoPos];
+			UnicodeToASCII(DeviceInfoPos, DeviceVersion);
+			printf_P(PSTR("   Device Version: %s\r\n"), DeviceVersion);
+
+			/* Receive the final response block from the device */
+			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
+			{
+				ShowCommandError(ErrorCode, false);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Verify that the command completed successfully */
+			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
+			{
+				ShowCommandError(PIMA_ReceivedBlock.Code, true);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			puts_P(PSTR("Opening Session...\r\n"));
+			
+			PIMA_SendBlock = (PIMA_Container_t)
+				{
+					.DataLength    = PIMA_COMMAND_SIZE(1),
+					.Type          = CType_CommandBlock,
+					.Code          = PIMA_OPERATION_OPENSESSION,
+					.TransactionID = 0x00000000,
+					.Params        = {0x00000001},
+				};
+			
+			/* Send the OPENSESSION block, open a session with an ID of 0x0001 */
+			SImage_SendBlockHeader();
+			
+			/* Receive the response block from the device */
+			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
+			{
+				ShowCommandError(ErrorCode, false);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+			
+			/* Verify that the command completed successfully */
+			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
+			{
+				ShowCommandError(PIMA_ReceivedBlock.Code, true);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Closing Session...\r\n"));
+
+			PIMA_SendBlock = (PIMA_Container_t)
+				{
+					.DataLength    = PIMA_COMMAND_SIZE(1),
+					.Type          = CType_CommandBlock,
+					.Code          = PIMA_OPERATION_CLOSESESSION,
+					.TransactionID = 0x00000001,
+					.Params        = {0x00000001},
+				};
+			
+			/* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
+			SImage_SendBlockHeader();
+			
+			/* Receive the response block from the device */
+			if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError)
+			{
+				ShowCommandError(ErrorCode, false);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			/* Verify that the command completed successfully */
+			if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK))
+			{
+				ShowCommandError(PIMA_ReceivedBlock.Code, true);
+				
+				USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+				break;
+			}
+
+			puts_P(PSTR("Done.\r\n"));
+
+			/* Indicate device no longer busy */
+			LEDs_SetAllLEDs(LEDMASK_USB_READY);
+			
+			USB_HostState = HOST_STATE_WaitForDeviceRemoval;
+			break;
+	}
+}
+
+/** Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode
+ *  strings which contain ASCII printable characters only.
+ *
+ *  \param[in] UnicodeString  Pointer to a Unicode encoded input string
+ *  \param[out] Buffer        Pointer to a buffer where the converted ASCII string should be stored
+ */
+void UnicodeToASCII(uint8_t* UnicodeString, char* Buffer)
+{
+	/* Get the number of characters in the string, skip to the start of the string data */
+	uint8_t CharactersRemaining = *(UnicodeString++);
+	
+	/* Loop through the entire unicode string */
+	while (CharactersRemaining--)
+	{
+		/* Load in the next unicode character (only the lower byte, as only Unicode coded ASCII is supported) */
+		*(Buffer++) = *UnicodeString;
+		
+		/* Jump to the next unicode character */
+		UnicodeString += 2;
+	}
+	
+	/* Null terminate the string */
+	*Buffer = 0;
+}
+
+/** Displays a PIMA command error via the device's serial port.
+ *
+ *  \param[in] ErrorCode          Error code of the function which failed to complete successfully
+ *  \param[in] ResponseCodeError  Indicates if the error is due to a command failed indication from the device, or a communication failure
+ */
+void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError)
+{
+	char* FailureType = ((ResponseCodeError) ? PSTR("Response Code != OK") : PSTR("Transaction Fail"));
+
+	printf_P(PSTR(ESC_FG_RED "Command Error (%S).\r\n"
+	                         " -- Error Code %d\r\n" ESC_FG_WHITE), FailureType, ErrorCode);
+			
+	/* Indicate error via status LEDs */
+	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+}