diff options
Diffstat (limited to 'LUFA/Drivers/USB/HighLevel/USBInterrupt.h')
| -rw-r--r-- | LUFA/Drivers/USB/HighLevel/USBInterrupt.h | 107 |
1 files changed, 0 insertions, 107 deletions
diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h index 7fbb33efc..14f693050 100644 --- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h +++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h @@ -45,113 +45,6 @@ extern "C" {
#endif
- /* Public Interface - May be used in end-application: */
- /* Throwable Events: */
- /** This module raises the USB Connected interrupt when the AVR is attached to a host while in device
- * USB mode.
- *
- * \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.
- * this means that the current connection state is derived from the bus suspension and wake up events by default,
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
- * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
- * and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.
- */
- RAISES_EVENT(USB_Connect);
-
- /** This module raises the USB Disconnected interrupt when the AVR is removed from a host while in
- * device USB mode.
- *
- * \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.
- * this means that the current connection state is derived from the bus suspension and wake up events by default,
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
- * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
- * and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.
- */
- RAISES_EVENT(USB_Disconnect);
-
- #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)
- /** This module raises the VBUS Change event when the current VBUS status (present or not present) has
- * changed.
- *
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_VBUSChange);
-
- /** This module raises the VBUS Connect event when the VBUS line is powered.
- *
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_VBUSConnect);
-
- /** This module raises the VBUS Disconnect event when power is removed from the VBUS line.
- *
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_VBUSDisconnect);
- #endif
-
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- /** This module raises the Suspended event when the host suspends the USB interface of the AVR
- * whilst running in device mode.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_Suspend);
-
- /** This module raises the Wake Up event when the host resumes the USB interface of the AVR
- * whilst running in device mode.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_WakeUp);
-
- /** This module raises the USB Reset event when the host resets the USB interface of the AVR
- * whilst running in device mode.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_Reset);
- #endif
-
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
- /** This module raises the Host Error event when the VBUS line voltage dips below the minimum threshold
- * while running in host mode.
- *
- * \note Not all USB AVR models support host mode; this event only exists on supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_HostError);
-
- /** This module raises the Device Unattached event when an attached device is removed from the AVR whilst
- * running in host mode.
- *
- * \note Not all USB AVR models support host mode; this event only exists on supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_DeviceUnattached);
- #endif
-
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
- /** This module raises the UID Change event when the UID line changes in value on dual-role devices.
- *
- * \note Not all USB AVR models support host mode and thus the UID pin; this event only exists on
- * supported AVRs.
- *
- * \see \ref Group_Events for more information on this event.
- */
- RAISES_EVENT(USB_UIDChange);
- #endif
-
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
|