diff options
Diffstat (limited to 'LUFA/Drivers/USB/LowLevel/Endpoint.h')
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 537 |
1 files changed, 20 insertions, 517 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 48e660584..0b0a4721e 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -38,38 +38,33 @@ * dispatch header located in LUFA/Drivers/USB/USB.h. */ -/** \ingroup Group_USB - * @defgroup Group_EndpointManagement Endpoint Management - * - * Functions, macros and enums related to endpoint management when in USB Device mode. This - * module contains the endpoint management macros, as well as endpoint interrupt and data - * send/receive functions for various data types. - * - * @{ - */ - -/** @defgroup Group_EndpointRW Endpoint Data Reading and Writing +/** \ingroup Group_EndpointManagement + * @defgroup Group_EndpointRW Endpoint Data Reading and Writing * * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints. */ -/** \ingroup Group_EndpointRW +/** \ingroup Group_EndpointRW * @defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to endpoints. */ -/** \ingroup Group_EndpointRW - * @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams +/** \ingroup Group_EndpointManagement + * @defgroup Group_EndpointPacketManagement Endpoint Packet Management * - * Functions, macros, variables, enums and types related to data reading and writing of data streams from - * and to endpoints. - */ + * Functions, macros, variables, enums and types related to packet management of endpoints. + */ -/** @defgroup Group_EndpointPacketManagement Endpoint Packet Management +/** \ingroup Group_USB + * @defgroup Group_EndpointManagement Endpoint Management * - * Functions, macros, variables, enums and types related to packet management of endpoints. + * Functions, macros and enums related to endpoint management when in USB Device mode. This + * module contains the endpoint management macros, as well as endpoint interrupt and data + * send/receive functions for various data types. + * + * @{ */ #ifndef __ENDPOINT_H__ @@ -77,17 +72,11 @@ /* Includes: */ #include <avr/io.h> - #include <avr/pgmspace.h> - #include <avr/eeprom.h> #include <stdbool.h> #include "../../../Common/Common.h" #include "../HighLevel/USBTask.h" #include "USBInterrupt.h" - - #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__) - #include "../HighLevel/StreamCallbacks.h" - #endif /* Enable C linkage for C++ Compilers: */ #if defined(__cplusplus) @@ -99,12 +88,6 @@ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. #endif - #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__) - #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback - #else - #define __CALLBACK_PARAM - #endif - /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) /* Macros: */ @@ -259,49 +242,6 @@ * \ref USB_STREAM_TIMEOUT_MS macro. */ }; - - /** Enum for the possible error return codes of the Endpoint_*_Stream_* functions. - * - * \ingroup Group_EndpointStreamRW - */ - enum Endpoint_Stream_RW_ErrorCodes_t - { - ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */ - ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream - * transfer by the host or device. - */ - ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during - * the transfer. - */ - ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and - * no USB endpoint traffic can occur until the bus - * has resumed. - */ - ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet - * within the software timeout period set by the - * \ref USB_STREAM_TIMEOUT_MS macro. - */ - ENDPOINT_RWSTREAM_CallbackAborted = 5, /**< Indicates that the stream's callback function - * aborted the transfer early. - */ - }; - - /** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions.. - * - * \ingroup Group_EndpointStreamRW - */ - enum Endpoint_ControlStream_RW_ErrorCodes_t - { - ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */ - ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */ - ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during - * the transfer. - */ - ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and - * no USB endpoint traffic can occur until the bus - * has resumed. - */ - }; /* Inline Functions: */ /** Configures the specified endpoint number with the given endpoint type, direction, bank size @@ -873,459 +813,22 @@ #endif /* Function Prototypes: */ - /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data - * to be read or written to it. - * - * \note This routine should not be called on CONTROL type endpoints. - * - * \ingroup Group_EndpointRW - * - * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. - */ - uint8_t Endpoint_WaitUntilReady(void); - /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. */ void Endpoint_ClearStatusStage(void); - /** Reads and discards the given number of bytes from the endpoint from the given buffer, - * discarding fully read packets from the host as needed. The last packet is not automatically - * discarded once the remaining bytes has been read; the user is responsible for manually - * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between - * each USB packet, the given stream callback function is executed repeatedly until the next - * packet is ready, allowing for early aborts of stream transfers. - * - * The callback routine should be created according to the information in \ref Group_StreamCallbacks. - * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are - * disabled and this function has the Callback parameter omitted. - * - * \note This routine should not be used on CONTROL type endpoints. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Discard_Stream(uint16_t Length - __CALLBACK_PARAM); - - /** Writes the given number of bytes to the endpoint from the given buffer in little endian, - * sending full packets to the host as needed. The last packet filled is not automatically sent; - * the user is responsible for manually sending the last written packet to the host via the - * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function - * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early - * aborts of stream transfers. - * - * The callback routine should be created according to the information in \ref Group_StreamCallbacks. - * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are - * disabled and this function has the Callback parameter omitted. - * - * \note This routine should not be used on CONTROL type endpoints. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Stream_LE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE(). - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_EStream_LE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE(). - * - * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_PStream_LE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** Writes the given number of bytes to the endpoint from the given buffer in big endian, - * sending full packets to the host as needed. The last packet filled is not automatically sent; - * the user is responsible for manually sending the last written packet to the host via the - * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function - * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early - * aborts of stream transfers. - * - * The callback routine should be created according to the information in \ref Group_StreamCallbacks. - * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are - * disabled and this function has the Callback parameter omitted. - * - * \note This routine should not be used on CONTROL type endpoints. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Stream_BE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE(). - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_EStream_BE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE(). - * - * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_PStream_BE(const void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** Reads the given number of bytes from the endpoint from the given buffer in little endian, - * discarding fully read packets from the host as needed. The last packet is not automatically - * discarded once the remaining bytes has been read; the user is responsible for manually - * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between - * each USB packet, the given stream callback function is executed repeatedly until the endpoint - * is ready to accept the next packet, allowing for early aborts of stream transfers. - * - * The callback routine should be created according to the information in \ref Group_StreamCallbacks. - * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are - * disabled and this function has the Callback parameter omitted. - * - * \note This routine should not be used on CONTROL type endpoints. - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_Stream_LE(void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE(). - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_EStream_LE(void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** Reads the given number of bytes from the endpoint from the given buffer in big endian, - * discarding fully read packets from the host as needed. The last packet is not automatically - * discarded once the remaining bytes has been read; the user is responsible for manually - * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between - * each USB packet, the given stream callback function is executed repeatedly until the endpoint - * is ready to accept the next packet, allowing for early aborts of stream transfers. - * - * The callback routine should be created according to the information in \ref Group_StreamCallbacks. - * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are - * disabled and this function has the Callback parameter omitted. - * - * \note This routine should not be used on CONTROL type endpoints. - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_Stream_BE(void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE(). - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback. - * - * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_EStream_BE(void* Buffer, - uint16_t Length - __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); - - /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian, - * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_EStream_LE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE(). - * - * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_PStream_LE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian, - * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared - * in both failure and success states; the user is responsible for manually clearing the setup OUT to - * finalize the transfer via the \ref Endpoint_ClearOUT() macro. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE(). - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_EStream_BE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE(). - * - * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[in] Buffer Pointer to the source data buffer to read from. - * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Write_Control_PStream_BE(const void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian, - * discarding fully read packets from the host as needed. The device IN acknowledgement is not - * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE(). - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian, - * discarding fully read packets from the host as needed. The device IN acknowledgement is not - * automatically sent after success or failure states; the user is responsible for manually sending the - * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro. - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. - * - * \ingroup Group_EndpointStreamRW - * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. - * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. - */ - uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE(). - * - * \note This function automatically clears the control transfer's status stage. Do not manually attempt - * to clear the status stage when using this routine in a control transaction. - * \n\n - * - * \note This routine should only be used on CONTROL type endpoints. - * - * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained - * together; i.e. the entire stream data must be read or written at the one time. + /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data + * to be read or written to it. * - * \ingroup Group_EndpointStreamRW + * \note This routine should not be called on CONTROL type endpoints. * - * \param[out] Buffer Pointer to the destination data buffer to write to. - * \param[in] Length Number of bytes to send via the currently selected endpoint. + * \ingroup Group_EndpointRW * - * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum. + * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum. */ - uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer, - uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); + uint8_t Endpoint_WaitUntilReady(void); /* Disable C linkage for C++ Compilers: */ #if defined(__cplusplus) |