diff options
Diffstat (limited to 'LUFA/Drivers/USB/LowLevel/Pipe.h')
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.h | 710 |
1 files changed, 389 insertions, 321 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index ee43babfe..0b07cbb25 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -105,6 +105,14 @@ #if !defined(__INCLUDE_FROM_USB_DRIVER) #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #if !defined(ENDPOINT_CONTROLEP) && !defined(__DOXYGEN__) + #define ENDPOINT_CONTROLEP 0 + #endif + #endif /* Public Interface - May be used in end-application: */ /* Macros: */ @@ -195,319 +203,6 @@ */ #define PIPE_EPDIR_MASK 0x80 - /* Pseudo-Function Macros: */ - #if defined(__DOXYGEN__) - /** Indicates the number of bytes currently stored in the current pipes's selected bank. - * - * \note The return width of this function may differ, depending on the maximum pipe bank size - * of the selected AVR model. - * - * \ingroup Group_PipeRW - * - * \return Total number of bytes in the currently selected Pipe's FIFO buffer. - */ - static inline uint16_t Pipe_BytesInPipe(void); - - /** Returns the pipe address of the currently selected pipe. This is typically used to save the - * currently selected pipe number so that it can be restored after another pipe has been manipulated. - * - * \return Index of the currently selected pipe. - */ - static inline uint8_t Pipe_GetCurrentPipe(void); - - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be - * indicated will operate on the currently selected pipe. - * - * \param[in] PipeNumber Index of the pipe to select. - */ - static inline void Pipe_SelectPipe(uint8_t PipeNumber); - - /** Resets the desired pipe, including the pipe banks and flags. - * - * \param[in] PipeNumber Index of the pipe to reset. - */ - static inline void Pipe_ResetPipe(uint8_t PipeNumber); - - /** Enables the currently selected pipe so that data can be sent and received through it to and from - * an attached device. - * - * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). - */ - static inline void Pipe_EnablePipe(void); - - /** Disables the currently selected pipe so that data cannot be sent and received through it to and - * from an attached device. - */ - static inline void Pipe_DisablePipe(void); - - /** Determines if the currently selected pipe is enabled, but not necessarily configured. - * - * \return Boolean True if the currently selected pipe is enabled, false otherwise. - */ - static inline bool Pipe_IsEnabled(void); - - /** Gets the current pipe token, indicating the pipe's data direction and type. - * - * \return The current pipe token, as a PIPE_TOKEN_* mask. - */ - static inline uint8_t Pipe_GetPipeToken(void); - - /** Sets the token for the currently selected pipe to one of the tokens specified by the PIPE_TOKEN_* - * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during - * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices - * which have two endpoints of opposite direction sharing the same endpoint address within the device. - * - * \param[in] Token New pipe token to set the selected pipe to, as a PIPE_TOKEN_* mask. - */ - static inline void Pipe_SetPipeToken(uint8_t Token); - - /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */ - static inline void Pipe_SetInfiniteINRequests(void); - - /** Configures the currently selected pipe to only allow the specified number of IN requests to be - * accepted by the pipe before it is automatically frozen. - * - * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing. - */ - static inline void Pipe_SetFiniteINRequests(uint8_t TotalINRequests); - - /** Determines if the currently selected pipe is configured. - * - * \return Boolean true if the selected pipe is configured, false otherwise. - */ - static inline bool Pipe_IsConfigured(void); - - /** Retrieves the endpoint number of the endpoint within the attached device that the currently selected - * pipe is bound to. - * - * \return Endpoint number the currently selected pipe is bound to. - */ - static inline uint8_t Pipe_BoundEndpointNumber(void); - - /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. - * - * \param[in] Milliseconds Number of milliseconds between each pipe poll. - */ - static inline void Pipe_SetInterruptPeriod(uint8_t Milliseconds); - - /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should - * be serviced. - * - * \return Mask whose bits indicate which pipes have interrupted. - */ - static inline uint8_t Pipe_GetPipeInterrupts(void); - - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type - * pipes). - * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. - * - * \return Boolean true if the specified pipe has interrupted, false otherwise. - */ - static inline bool Pipe_HasPipeInterrupted(uint8_t PipeNumber); - - /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ - static inline void Pipe_Unfreeze(void); - - /** Freezes the selected pipe, preventing it from communicating with an attached device. */ - static inline void Pipe_Freeze(void); - - /** Determines if the currently selected pipe is frozen, and not able to accept data. - * - * \return Boolean true if the currently selected pipe is frozen, false otherwise. - */ - static inline bool Pipe_IsFrozen(void); - - /** Clears the master pipe error flag. */ - static inline void Pipe_ClearError(void); - - /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that - * some sort of hardware error has occurred on the pipe. - * - * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag. - * - * \return Boolean true if an error has occurred on the selected pipe, false otherwise. - */ - static inline bool Pipe_IsError(void); - - /** Clears all the currently selected pipe's hardware error flags, but does not clear the master error - * flag for the pipe. - */ - static inline void Pipe_ClearErrorFlags(void); - - /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This - * value can then be masked against the PIPE_ERRORFLAG_* masks to determine what error has occurred. - * - * \return Mask comprising of PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe. - */ - static inline uint8_t Pipe_GetErrorFlags(void); - - /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe - * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT - * direction). This function will return false if an error has occurred in the pipe, or if the pipe - * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT - * direction and the pipe bank is full. - * - * \note This function is not valid on CONTROL type pipes. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if the currently selected pipe may be read from or written to, depending on its direction. - */ - static inline bool Pipe_IsReadWriteAllowed(void); - - /** Determines if an IN request has been received on the currently selected pipe. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if the current pipe has received an IN packet, false otherwise. - */ - static inline bool Pipe_IsINReceived(void); - - /** Determines if the currently selected pipe is ready to send an OUT request. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if the current pipe is ready for an OUT packet, false otherwise. - */ - static inline bool Pipe_IsOUTReady(void); - - /** Determines if no SETUP request is currently being sent to the attached device on the selected - * CONTROL type pipe. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if the current pipe is ready for a SETUP packet, false otherwise. - */ - static inline bool Pipe_IsSETUPSent(void); - - /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet. - * - * \ingroup Group_PipePacketManagement - */ - static inline void Pipe_ClearSETUP(void); - - /** Acknowledges the reception of a setup IN request from the attached device on the currently selected - * pipe, freeing the bank ready for the next packet. - * - * \ingroup Group_PipePacketManagement - */ - static inline void Pipe_ClearIN(void); - - /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing - * the bank ready for the next packet. - * - * \ingroup Group_PipePacketManagement - */ - static inline void Pipe_ClearOUT(void); - - /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on - * the currently selected pipe. This occurs when the host sends a packet to the device, but the device - * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been - * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet - * can be re-sent. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if an NAK has been received on the current pipe, false otherwise. - */ - static inline bool Pipe_IsNAKReceived(void); - - /** Clears the NAK condition on the currently selected pipe. - * - * \ingroup Group_PipePacketManagement - * - * \see \ref Pipe_IsNAKReceived() for more details. - */ - static inline void Pipe_ClearNAKReceived(void); - - /** Determines if the currently selected pipe has had the STALL condition set by the attached device. - * - * \ingroup Group_PipePacketManagement - * - * \return Boolean true if the current pipe has been stalled by the attached device, false otherwise. - */ - static inline bool Pipe_IsStalled(void); - - /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the - * STALL condition itself (this must be done via a ClearFeature control request to the device). - * - * \ingroup Group_PipePacketManagement - */ - static inline void Pipe_ClearStall(void); - #else - #define Pipe_BytesInPipe() UPBCX - - #define Pipe_GetCurrentPipe() (UPNUM & PIPE_PIPENUM_MASK) - - #define Pipe_SelectPipe(pipenum) MACROS{ UPNUM = (pipenum); }MACROE - - #define Pipe_ResetPipe(pipenum) MACROS{ UPRST = (1 << (pipenum)); UPRST = 0; }MACROE - - #define Pipe_EnablePipe() MACROS{ UPCONX |= (1 << PEN); }MACROE - - #define Pipe_DisablePipe() MACROS{ UPCONX &= ~(1 << PEN); }MACROE - - #define Pipe_IsEnabled() ((UPCONX & (1 << PEN)) ? true : false) - - #define Pipe_GetPipeToken() (UPCFG0X & PIPE_TOKEN_MASK) - - #define Pipe_SetPipeToken(token) MACROS{ UPCFG0X = ((UPCFG0X & ~PIPE_TOKEN_MASK) | (token)); }MACROE - - #define Pipe_SetInfiniteINRequests() MACROS{ UPCONX |= (1 << INMODE); }MACROE - - #define Pipe_SetFiniteINRequests(n) MACROS{ UPCONX &= ~(1 << INMODE); UPINRQX = (n); }MACROE - - #define Pipe_IsConfigured() ((UPSTAX & (1 << CFGOK)) ? true : false) - - #define Pipe_BoundEndpointNumber() ((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK) - - #define Pipe_SetInterruptPeriod(ms) MACROS{ UPCFG2X = (ms); }MACROE - - #define Pipe_GetPipeInterrupts() UPINT - - #define Pipe_HasPipeInterrupted(n) ((UPINT & (1 << (n))) ? true : false) - - #define Pipe_Unfreeze() MACROS{ UPCONX &= ~(1 << PFREEZE); }MACROE - - #define Pipe_Freeze() MACROS{ UPCONX |= (1 << PFREEZE); }MACROE - - #define Pipe_IsFrozen() ((UPCONX & (1 << PFREEZE)) ? true : false) - - #define Pipe_ClearError() MACROS{ UPINTX &= ~(1 << PERRI); }MACROE - - #define Pipe_IsError() ((UPINTX & (1 << PERRI)) ? true : false) - - #define Pipe_ClearErrorFlags() MACROS{ UPERRX = 0; }MACROE - - #define Pipe_GetErrorFlags() ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT | \ - PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID | \ - PIPE_ERRORFLAG_DATATGL)) | \ - (UPSTAX & PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW)) - - #define Pipe_IsReadWriteAllowed() ((UPINTX & (1 << RWAL)) ? true : false) - - #define Pipe_IsINReceived() ((UPINTX & (1 << RXINI)) ? true : false) - - #define Pipe_IsOUTReady() ((UPINTX & (1 << TXOUTI)) ? true : false) - - #define Pipe_IsSETUPSent() ((UPINTX & (1 << TXSTPI)) ? true : false) - - #define Pipe_ClearIN() MACROS{ UPINTX &= ~((1 << RXINI) | (1 << FIFOCON)); }MACROE - - #define Pipe_ClearOUT() MACROS{ UPINTX &= ~((1 << TXOUTI) | (1 << FIFOCON)); }MACROE - - #define Pipe_ClearSETUP() MACROS{ UPINTX &= ~((1 << TXSTPI) | (1 << FIFOCON)); }MACROE - - #define Pipe_IsNAKReceived() ((UPINTX & (1 << NAKEDI)) ? true : false) - - #define Pipe_ClearNAKReceived() MACROS{ UPINTX &= ~(1 << NAKEDI); }MACROE - - #define Pipe_IsStalled() ((UPINTX & (1 << RXSTALLI)) ? true : false) - - #define Pipe_ClearStall() MACROS{ UPINTX &= ~(1 << RXSTALLI); }MACROE - #endif - /* Enums: */ /** Enum for the possible error return codes of the Pipe_WaitUntilReady function. * @@ -545,6 +240,386 @@ }; /* Inline Functions: */ + /** Indicates the number of bytes currently stored in the current pipes's selected bank. + * + * \note The return width of this function may differ, depending on the maximum pipe bank size + * of the selected AVR model. + * + * \ingroup Group_PipeRW + * + * \return Total number of bytes in the currently selected Pipe's FIFO buffer. + */ + static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint16_t Pipe_BytesInPipe(void) + { + return UPBCX; + } + + /** Returns the pipe address of the currently selected pipe. This is typically used to save the + * currently selected pipe number so that it can be restored after another pipe has been manipulated. + * + * \return Index of the currently selected pipe. + */ + static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetCurrentPipe(void) + { + return (UPNUM & PIPE_PIPENUM_MASK); + } + + /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + * indicated will operate on the currently selected pipe. + * + * \param[in] PipeNumber Index of the pipe to select. + */ + static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + { + UPNUM = PipeNumber; + } + + /** Resets the desired pipe, including the pipe banks and flags. + * + * \param[in] PipeNumber Index of the pipe to reset. + */ + static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + { + UPRST = (1 << PipeNumber); + UPRST = 0; + } + + /** Enables the currently selected pipe so that data can be sent and received through it to and from + * an attached device. + * + * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe(). + */ + static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_EnablePipe(void) + { + UPCONX |= (1 << PEN); + } + + /** Disables the currently selected pipe so that data cannot be sent and received through it to and + * from an attached device. + */ + static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_DisablePipe(void) + { + UPCONX &= ~(1 << PEN); + } + + /** Determines if the currently selected pipe is enabled, but not necessarily configured. + * + * \return Boolean True if the currently selected pipe is enabled, false otherwise. + */ + static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsEnabled(void) + { + return ((UPCONX & (1 << PEN)) ? true : false); + } + + /** Gets the current pipe token, indicating the pipe's data direction and type. + * + * \return The current pipe token, as a PIPE_TOKEN_* mask. + */ + static inline uint8_t Pipe_GetPipeToken(void) ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeToken(void) + { + return (UPCFG0X & (0x03 << PTOKEN0)); + } + + /** Sets the token for the currently selected pipe to one of the tokens specified by the PIPE_TOKEN_* + * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during + * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices + * which have two endpoints of opposite direction sharing the same endpoint address within the device. + * + * \param[in] Token New pipe token to set the selected pipe to, as a PIPE_TOKEN_* mask. + */ + static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetPipeToken(const uint8_t Token) + { + UPCFG0X = ((UPCFG0X & ~(0x03 << PTOKEN0)) | Token); + } + + /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */ + static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInfiniteINRequests(void) + { + UPCONX |= (1 << INMODE); + } + + /** Configures the currently selected pipe to only allow the specified number of IN requests to be + * accepted by the pipe before it is automatically frozen. + * + * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing. + */ + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) + { + UPCONX &= ~(1 << INMODE); + UPINRQX = TotalINRequests; + } + + /** Determines if the currently selected pipe is configured. + * + * \return Boolean true if the selected pipe is configured, false otherwise. + */ + static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsConfigured(void) + { + return ((UPSTAX & (1 << CFGOK)) ? true : false); + } + + /** Retrieves the endpoint number of the endpoint within the attached device that the currently selected + * pipe is bound to. + * + * \return Endpoint number the currently selected pipe is bound to. + */ + static inline uint8_t Pipe_BoundEndpointNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_BoundEndpointNumber(void) + { + return ((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK); + } + + /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. + * + * \param[in] Milliseconds Number of milliseconds between each pipe poll. + */ + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE; + static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) + { + UPCFG2X = Milliseconds; + } + + /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should + * be serviced. + * + * \return Mask whose bits indicate which pipes have interrupted. + */ + static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeInterrupts(void) + { + return UPINT; + } + + /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + * pipes). + * + * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * + * \return Boolean true if the specified pipe has interrupted, false otherwise. + */ + static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + { + return ((UPINT & (1 << PipeNumber)) ? true : false); + } + + /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ + static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Unfreeze(void) + { + UPCONX &= ~(1 << PFREEZE); + } + + /** Freezes the selected pipe, preventing it from communicating with an attached device. */ + static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_Freeze(void) + { + UPCONX |= (1 << PFREEZE); + } + + /** Determines if the currently selected pipe is frozen, and not able to accept data. + * + * \return Boolean true if the currently selected pipe is frozen, false otherwise. + */ + static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsFrozen(void) + { + return ((UPCONX & (1 << PFREEZE)) ? true : false); + } + + /** Clears the master pipe error flag. */ + static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearError(void) + { + UPINTX &= ~(1 << PERRI); + } + + /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that + * some sort of hardware error has occurred on the pipe. + * + * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag. + * + * \return Boolean true if an error has occurred on the selected pipe, false otherwise. + */ + static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsError(void) + { + return ((UPINTX & (1 << PERRI)) ? true : false); + } + + /** Clears all the currently selected pipe's hardware error flags, but does not clear the master error + * flag for the pipe. + */ + static inline void Pipe_ClearErrorFlags(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearErrorFlags(void) + { + UPERRX = 0; + } + + /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This + * value can then be masked against the PIPE_ERRORFLAG_* masks to determine what error has occurred. + * + * \return Mask comprising of PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe. + */ + static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetErrorFlags(void) + { + return ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT | + PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID | + PIPE_ERRORFLAG_DATATGL)) | + (UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW))); + } + + /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe + * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT + * direction). This function will return false if an error has occurred in the pipe, or if the pipe + * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT + * direction and the pipe bank is full. + * + * \note This function is not valid on CONTROL type pipes. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if the currently selected pipe may be read from or written to, depending on its direction. + */ + static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsReadWriteAllowed(void) + { + return ((UPINTX & (1 << RWAL)) ? true : false); + } + + /** Determines if an IN request has been received on the currently selected pipe. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if the current pipe has received an IN packet, false otherwise. + */ + static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsINReceived(void) + { + return ((UPINTX & (1 << RXINI)) ? true : false); + } + + /** Determines if the currently selected pipe is ready to send an OUT request. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if the current pipe is ready for an OUT packet, false otherwise. + */ + static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsOUTReady(void) + { + return ((UPINTX & (1 << TXOUTI)) ? true : false); + } + + /** Determines if no SETUP request is currently being sent to the attached device on the selected + * CONTROL type pipe. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if the current pipe is ready for a SETUP packet, false otherwise. + */ + static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsSETUPSent(void) + { + return ((UPINTX & (1 << TXSTPI)) ? true : false); + } + + /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet. + * + * \ingroup Group_PipePacketManagement + */ + static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearSETUP(void) + { + UPINTX &= ~((1 << TXSTPI) | (1 << FIFOCON)); + } + + /** Acknowledges the reception of a setup IN request from the attached device on the currently selected + * pipe, freeing the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement + */ + static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearIN(void) + { + UPINTX &= ~((1 << RXINI) | (1 << FIFOCON)); + } + + /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing + * the bank ready for the next packet. + * + * \ingroup Group_PipePacketManagement + */ + static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearOUT(void) + { + UPINTX &= ~((1 << TXOUTI) | (1 << FIFOCON)); + } + + /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on + * the currently selected pipe. This occurs when the host sends a packet to the device, but the device + * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been + * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet + * can be re-sent. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if an NAK has been received on the current pipe, false otherwise. + */ + static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsNAKReceived(void) + { + return ((UPINTX & (1 << NAKEDI)) ? true : false); + } + + /** Clears the NAK condition on the currently selected pipe. + * + * \ingroup Group_PipePacketManagement + * + * \see \ref Pipe_IsNAKReceived() for more details. + */ + static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearNAKReceived(void) + { + UPINTX &= ~(1 << NAKEDI); + } + + /** Determines if the currently selected pipe has had the STALL condition set by the attached device. + * + * \ingroup Group_PipePacketManagement + * + * \return Boolean true if the current pipe has been stalled by the attached device, false otherwise. + */ + static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_IsStalled(void) + { + return ((UPINTX & (1 << RXSTALLI)) ? true : false); + } + + /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the + * STALL condition itself (this must be done via a ClearFeature control request to the device). + * + * \ingroup Group_PipePacketManagement + */ + static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE; + static inline void Pipe_ClearStall(void) + { + UPINTX &= ~(1 << RXSTALLI); + } + /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes. * * \ingroup Group_PipePrimitiveRW @@ -1046,14 +1121,7 @@ __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1); /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Macros: */ - #define PIPE_TOKEN_MASK (0x03 << PTOKEN0) - - #if !defined(ENDPOINT_CONTROLEP) - #define ENDPOINT_CONTROLEP 0 - #endif - + #if !defined(__DOXYGEN__) /* Function Prototypes: */ void Pipe_ClearPipes(void); |