diff options
Diffstat (limited to 'LUFA/Drivers/USB')
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/HID.c | 63 | ||||
-rw-r--r-- | LUFA/Drivers/USB/Class/Host/HID.h | 38 |
2 files changed, 72 insertions, 29 deletions
diff --git a/LUFA/Drivers/USB/Class/Host/HID.c b/LUFA/Drivers/USB/Class/Host/HID.c index d94c2db4a..992721927 100644 --- a/LUFA/Drivers/USB/Class/Host/HID.c +++ b/LUFA/Drivers/USB/Class/Host/HID.c @@ -153,6 +153,7 @@ void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) }
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, const uint8_t ReportID, void* Buffer)
{
USB_ControlRequest = (USB_Request_Header_t)
@@ -168,7 +169,8 @@ uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceI return USB_Host_SendControlRequest(Buffer);
}
-
+#endif
+
uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, void* Buffer)
{
if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
@@ -181,11 +183,8 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint16_t ReportSize;
- if (HIDInterfaceInfo->State.UsingBootProtocol)
- {
- ReportSize = Pipe_BytesInPipe();
- }
- else
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ if (!(HIDInterfaceInfo->State.UsingBootProtocol))
{
uint8_t ReportID = 0;
@@ -197,6 +196,11 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, ReportSize = USB_GetHIDReportSize(HIDInterfaceInfo->Config.HIDParserData, ReportID, REPORT_ITEM_TYPE_In);
}
+ else
+#endif
+ {
+ ReportSize = Pipe_BytesInPipe();
+ }
if ((ErrorCode = Pipe_Read_Stream_LE(Buffer, ReportSize, NO_STREAM_CALLBACK)) != PIPE_RWSTREAM_NoError)
return ErrorCode;
@@ -207,28 +211,17 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, return PIPE_RWSTREAM_NoError;
}
-uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint8_t ReportID, void* Buffer,
- const uint16_t ReportSize)
+uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ const uint8_t ReportID,
+#endif
+ void* Buffer, const uint16_t ReportSize)
{
if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
return false;
-
- if (!(HIDInterfaceInfo->State.DeviceUsesOUTPipe))
- {
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = REQ_SetReport,
- .wValue = ReportID,
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = ReportSize,
- };
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
- }
- else
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ if (HIDInterfaceInfo->State.DeviceUsesOUTPipe)
{
uint8_t ErrorCode;
@@ -246,6 +239,26 @@ uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo return PIPE_RWSTREAM_NoError;
}
+ else
+#endif
+ {
+ USB_ControlRequest = (USB_Request_Header_t)
+ {
+ .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
+ .bRequest = REQ_SetReport,
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ .wValue = ReportID,
+#else
+ .wValue = 0,
+#endif
+ .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
+ .wLength = ReportSize,
+ };
+
+ Pipe_SelectPipe(PIPE_CONTROLPIPE);
+
+ return USB_Host_SendControlRequest(Buffer);
+ }
}
bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
@@ -295,6 +308,7 @@ uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInf return HOST_SENDCONTROL_Successful;
}
+#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
{
uint8_t ErrorCode;
@@ -346,5 +360,6 @@ uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceI return 0;
}
+#endif
#endif
diff --git a/LUFA/Drivers/USB/Class/Host/HID.h b/LUFA/Drivers/USB/Class/Host/HID.h index 95afbb491..5cac00eb6 100644 --- a/LUFA/Drivers/USB/Class/Host/HID.h +++ b/LUFA/Drivers/USB/Class/Host/HID.h @@ -77,8 +77,14 @@ * \ref HID_BOOT_KEYBOARD_PROTOCOL or \ref HID_NON_BOOT_PROTOCOL if any
* HID device should be enumerated by the interface
*/
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
HID_ReportInfo_t* HIDParserData; /**< HID parser data to store the parsed HID report data, when boot protocol
- * is not used */
+ * is not used
+ *
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined,
+ * this method is unavailable.
+ */
+ #endif
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* <b>must</b> be set or the interface will fail to enumerate and operate correctly.
*/
@@ -157,8 +163,11 @@ */
uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, void* Buffer) ATTR_NON_NULL_PTR_ARG(1, 2);
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
/** Received a HID IN report from the attached device, by the report ID.
*
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
+ *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch
* \param[in] Buffer Buffer to store the received report into
@@ -167,10 +176,14 @@ */
uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, const uint8_t ReportID,
void* Buffer) ATTR_NON_NULL_PTR_ARG(1, 3);
-
+ #endif
+
/** Sends an OUT report to the currently attached HID device, using the device's OUT pipe if available or the device's
* Control pipe if not.
*
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed
+ * from the parameter list of this function.
+ *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
* \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs
* \param[in] Buffer Buffer containing the report to send to the attached device
@@ -179,8 +192,16 @@ * \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
* the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise
*/
- uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, const uint8_t ReportID,
- void* Buffer, const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1, 3);
+ uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ const uint8_t ReportID,
+ #endif
+ void* Buffer, const uint16_t ReportSize)
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
+ ATTR_NON_NULL_PTR_ARG(1, 3);
+ #else
+ ATTR_NON_NULL_PTR_ARG(1, 2);
+ #endif
/** Determines if a HID IN report has been received from the attached device on the data IN pipe.
*
@@ -192,6 +213,9 @@ /** Switches the attached HID device's reporting protocol over to the Boot Report protocol mode, on supported devices.
*
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method must still be called
+ * to explicitly place the attached device into boot protocol mode before use.
+ *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
*
* \return \ref HID_ERROR_LOGICAL if the device does not support Boot Protocol mode, a value from the
@@ -199,12 +223,15 @@ */
uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
/** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
* and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
*
* \note Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
* Report Parser this function references <b>must</b> be implemented in the user code.
*
+ * \note When the HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
+ *
* \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state
*
* \return A value from the \ref USB_Host_SendControlErrorCodes_t enum if an error occurs while retrieving the HID
@@ -213,7 +240,8 @@ * and a value from the \ref HID_Parse_ErrorCodes_t otherwise
*/
uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
+ #endif
+
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
|