diff options
Diffstat (limited to 'Projects/XPLAINBridge/XPLAINBridge.c')
| -rw-r--r-- | Projects/XPLAINBridge/XPLAINBridge.c | 12 |
1 files changed, 9 insertions, 3 deletions
diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index 912e68367..c71a42103 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -66,9 +66,15 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */ RingBuff_t USBtoUART_Buffer; +/** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */ +uint8_t USBtoUART_Buffer_Data[128]; + /** Circular buffer to hold data from the serial port before it is sent to the host. */ RingBuff_t UARTtoUSB_Buffer; +/** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */ +uint8_t UARTtoUSB_Buffer_Data[128]; + /** Main program entry point. This routine contains the overall program flow, including initial * setup of all components and the main program loop. @@ -130,7 +136,7 @@ void UARTBridge_Task(void) } /* Check if the UART receive buffer flush timer has expired or buffer is nearly full */ - RingBuff_Count_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer); + uint16_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer); if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200)) { /* Clear flush timer expiry flag */ @@ -199,8 +205,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) TCCR0B = ((1 << CS02) | (1 << CS00)); /* Initialize ring buffers used to hold serial data between USB and software UART interfaces */ - RingBuffer_InitBuffer(&USBtoUART_Buffer); - RingBuffer_InitBuffer(&UARTtoUSB_Buffer); + RingBuffer_InitBuffer(&USBtoUART_Buffer, USBtoUART_Buffer_Data, sizeof(USBtoUART_Buffer_Data)); + RingBuffer_InitBuffer(&UARTtoUSB_Buffer, UARTtoUSB_Buffer_Data, sizeof(UARTtoUSB_Buffer_Data)); /* Start the software USART */ SoftUART_Init(); |