aboutsummaryrefslogtreecommitdiffstats
path: root/Projects
diff options
context:
space:
mode:
Diffstat (limited to 'Projects')
-rw-r--r--Projects/SerialToLCD/SerialToLCD.txt194
-rw-r--r--Projects/SerialToLCD/makefile70
2 files changed, 132 insertions, 132 deletions
diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt
index 8058ee52d..cb30b6bc2 100644
--- a/Projects/SerialToLCD/SerialToLCD.txt
+++ b/Projects/SerialToLCD/SerialToLCD.txt
@@ -1,97 +1,97 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
- *
- * \section Sec_Compat Project Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this project.
- *
- * \li AT90USB162
- *
- * \section Sec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this project.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Communications Device Class (CDC)</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>Abstract Control Model (ACM)</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF CDC Class Standard</td>
- * </tr>
- * <tr>
- * <td><b>Supported USB Speeds:</b></td>
- * <td>Full Speed Mode</td>
- * </tr>
- * </table>
- *
- * \section Sec_Description Project Description:
- *
- * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
- * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
- * link, so that data supplied by the host can be written to the display. This project is
- * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
- * if desired.
- *
- * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
- * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
- *
- * Below are the connections between the AVR Minimus board and LCD.
- *
- * <table>
- * <tr>
- * <td><b>AVR Pin:</b></td>
- * <td><b>HD44780 LCD Pin:</b></td>
- * </tr>
- * <tr>
- * <td>VCC</td>
- * <td>VCC</td>
- * </tr>
- * <tr>
- * <td>GND</td>
- * <td>GND</td>
- * </tr>
- * <tr>
- * <td>PD0</td>
- * <td>DB4</td>
- * </tr>
- * <tr>
- * <td>PD1</td>
- * <td>DB5</td>
- * </tr>
- * <tr>
- * <td>PD2</td>
- * <td>DB6</td>
- * </tr>
- * <tr>
- * <td>PD3</td>
- * <td>DB7</td>
- * </tr>
- * <tr>
- * <td>PD4</td>
- * <td>/RS</td>
- * </tr>
- * <tr>
- * <td>GND</td>
- * <td>/RW</td>
- * </tr>
- * <tr>
- * <td>PD7</td>
- * <td>/E</td>
- * </tr>
- * </table>
- */
+/** \file
+ *
+ * This file contains special DoxyGen information for the generation of the main page and other special
+ * documentation pages. It is not a project source file.
+ */
+
+/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project
+ *
+ * \section Sec_Compat Project Compatibility:
+ *
+ * The following list indicates what microcontrollers are compatible with this project.
+ *
+ * \li AT90USB162
+ *
+ * \section Sec_Info USB Information:
+ *
+ * The following table gives a rundown of the USB utilization of this project.
+ *
+ * <table>
+ * <tr>
+ * <td><b>USB Mode:</b></td>
+ * <td>Device</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Class:</b></td>
+ * <td>Communications Device Class (CDC)</td>
+ * </tr>
+ * <tr>
+ * <td><b>USB Subclass:</b></td>
+ * <td>Abstract Control Model (ACM)</td>
+ * </tr>
+ * <tr>
+ * <td><b>Relevant Standards:</b></td>
+ * <td>USBIF CDC Class Standard</td>
+ * </tr>
+ * <tr>
+ * <td><b>Supported USB Speeds:</b></td>
+ * <td>Full Speed Mode</td>
+ * </tr>
+ * </table>
+ *
+ * \section Sec_Description Project Description:
+ *
+ * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This
+ * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial
+ * link, so that data supplied by the host can be written to the display. This project is
+ * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware
+ * if desired.
+ *
+ * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n
+ * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n
+ *
+ * Below are the connections between the AVR Minimus board and LCD.
+ *
+ * <table>
+ * <tr>
+ * <td><b>AVR Pin:</b></td>
+ * <td><b>HD44780 LCD Pin:</b></td>
+ * </tr>
+ * <tr>
+ * <td>VCC</td>
+ * <td>VCC</td>
+ * </tr>
+ * <tr>
+ * <td>GND</td>
+ * <td>GND</td>
+ * </tr>
+ * <tr>
+ * <td>PD0</td>
+ * <td>DB4</td>
+ * </tr>
+ * <tr>
+ * <td>PD1</td>
+ * <td>DB5</td>
+ * </tr>
+ * <tr>
+ * <td>PD2</td>
+ * <td>DB6</td>
+ * </tr>
+ * <tr>
+ * <td>PD3</td>
+ * <td>DB7</td>
+ * </tr>
+ * <tr>
+ * <td>PD4</td>
+ * <td>/RS</td>
+ * </tr>
+ * <tr>
+ * <td>GND</td>
+ * <td>/RW</td>
+ * </tr>
+ * <tr>
+ * <td>PD7</td>
+ * <td>/E</td>
+ * </tr>
+ * </table>
+ */
diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile
index 4c1fdef61..2c74f5fbc 100644
--- a/Projects/SerialToLCD/makefile
+++ b/Projects/SerialToLCD/makefile
@@ -1,35 +1,35 @@
-#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-MCU = at90usb162
-ARCH = AVR8
-BOARD = MINIMUS
-F_CPU = 16000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = SerialToLCD
-SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
-LUFA_PATH = ../../LUFA/
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
-LD_FLAGS =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa.core.in
-include $(LUFA_PATH)/Build/lufa.sources.in
-include $(LUFA_PATH)/Build/lufa.build.in
-include $(LUFA_PATH)/Build/lufa.cppcheck.in
-include $(LUFA_PATH)/Build/lufa.doxygen.in
-include $(LUFA_PATH)/Build/lufa.dfu.in
-include $(LUFA_PATH)/Build/lufa.avrdude.in
-include $(LUFA_PATH)/Build/lufa.atprogram.in
+#
+# LUFA Library
+# Copyright (C) Dean Camera, 2012.
+#
+# dean [at] fourwalledcubicle [dot] com
+# www.lufa-lib.org
+#
+# --------------------------------------
+# LUFA Project Makefile.
+# --------------------------------------
+
+MCU = at90usb162
+ARCH = AVR8
+BOARD = MINIMUS
+F_CPU = 16000000
+F_USB = $(F_CPU)
+OPTIMIZATION = s
+TARGET = SerialToLCD
+SRC = $(TARGET).c Descriptors.c Lib/HD44780.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH = ../../LUFA/
+CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS =
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa.core.in
+include $(LUFA_PATH)/Build/lufa.sources.in
+include $(LUFA_PATH)/Build/lufa.build.in
+include $(LUFA_PATH)/Build/lufa.cppcheck.in
+include $(LUFA_PATH)/Build/lufa.doxygen.in
+include $(LUFA_PATH)/Build/lufa.dfu.in
+include $(LUFA_PATH)/Build/lufa.avrdude.in
+include $(LUFA_PATH)/Build/lufa.atprogram.in
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-10 03:49:16 +0000