| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
| |
needs to be cleared, not the buffer pointer.
|
| |
|
| |
|
|
|
|
| |
XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
|
|
|
|
| |
after programming or reading from the last page of FLASH.
|
| |
|
|
|
|
|
|
| |
request handler of DevChapter9, which broke Set Configuration requests to the device under most circumstances.
Move out the SPI prescaler list to a PROGMEM module-level variable in ISPTarget.c.
|
| |
|
|
|
|
|
|
| |
commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton).
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
|
|
|
|
| |
the control endpoint is not properly selected when the ISR completes.
|
|
|
|
|
|
| |
AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver.
Fix Benito makefile which was accidentally changed during testing.
|
| |
|
| |
|
| |
|
|
|
|
| |
endpoint was not selected at the point the USB endpoint interrupt fires when INTERRUPT_CONTROL_ENDPOINT is defined.
|
|
|
|
|
|
| |
host report sending routines.
Renamed internal Host mode Class driver descriptor comparator callback routines so that they all start with a uniform DCOMP_{Class Abbreviation}_ prefix.
|
|
|
|
| |
correctly converted to the target system's native end of line style.
|
|
|
|
|
|
| |
status stage is sent to prevent the host from timing out if another request is immediately fired and the device has a lengthy callback routine.
Inlined currently unused MIDI ProcessControlRequest routine.
|
|
|
|
| |
the alternative addressing scheme.
|
| |
|
|
|
|
| |
function to the Device and Host CDC Class drivers.
|
|
|
|
| |
CDC demos, bootloaders and projects.
|
|
|
|
| |
queried and the bank has become empty.
|
|
|
|
|
|
| |
soft-reset. Reduce size of the TeensyHID bootloader slightly.
Fix the TeensyHID bootloader for the larger USB AVR devices, since Paul uses a different (undocumented) addressing scheme on these devices.
|
|
|
|
| |
register names.
|
|
|
|
| |
was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
|
|
|
|
| |
interrupts from occuring while the control endpoint request is being processed, causing possible lockups if a USB interrupt occurs during a transfer.
|
|
|
|
| |
HID_Host_SendReportByID() was called and the HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set.
|
|
|
|
|
|
|
|
| |
sets the address to 0x00.
Fixed Set Configuration requests not being stalled until the host has set the device's address.
Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
|
|
|
|
| |
that the stream functions early-abort if the bus is suspended before or during a transfer.
|
|
|
|
|
|
| |
interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.
Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
|
|
|
|
| |
functions are now inline, to reduce overhead.
|
|
|
|
| |
the Host mode Class Driver demos.
|
|
|
|
| |
for the other USB driver header files.
|
|
|
|
| |
LowLevel directory as it is hardware-dependent.
|
|
|
|
| |
be done in the user application once all init code has run.
|
|
|
|
|
|
|
|
|
|
| |
the BluetoothHost demo.
Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR.
Factored out Bluetooth state information into a new state structure for easy reference in the user application.
Added new StackInitialized() Bluetooth stack callback function.
|
|
|
|
|
|
| |
host requests a report via the control endpoint and the user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski).
Clean up incomplete BluetoothHost debugging commands to use GCC extension to avoid NULL parameters when no formatting is required.
|
|
|
|
| |
Minor documentation improvements.
|
| |
|
|
|
|
|
|
|
|
| |
applicable to variables also. Add new ATTR_NOINIT attribute for global variables.
Add the beginnings of a SDP implentation to the incomplete BluetoothHost demo.
Add const attribute to the Mass Storage Host driver functions where it was applicable, but missing.
|
|
|
|
|
|
| |
returning a stall to the host.
Make TeensyHID bootloader use an 8 byte control endpoint to match the official Teensy, just in case Paul decides to authenticate on that attribute in the future.
|
|
|
|
|
|
|
|
| |
faster endpoint/pipe code.
Added spacing between multiple paragraphs in Doxygen \note sections.
Removed call to the clock prescaler reset function in the Teensy bootloader to save space - the user application is accessed via a watchdog reset anyway, so the prescale reset would only affect the speed of the bootloader itself.
|
|
|
|
| |
bootloaders can only be replaced with an external programmer.
|
|
|
|
|
|
|
|
| |
signalling command processing routines.
Change over the code so that the bluetooth packet data is read in by the stack rather than the user application, to make it more unform for sending/receiving, and so the library can handle incomming fragmentation in the future.
Start Service Discovery Protocol decoding and processing.
|
|
|
|
| |
determine why Windows machines refuse to connect.
|
|
|
|
| |
Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.
|
|
|
|
|
|
|
|
| |
connections from remote devices. Add in ability to reject connections based on their bluetooth device address.
Clean up RelayBoard project code.
Make AVRISP project clear the XMEGA target's reset register twice; this does not appear to take affect properly the first time under some circumstances.
|
|
|
|
| |
code much easier to read, block less and work correctly.
|
|
|
|
| |
to make the code compatible with Windows builds of avrdude at the expense of AVRStudio compatibility.
|