| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
| |
is bus-powered only. Add compile time options to reduce the compiled size of the firmware.
|
|
|
|
| |
single command should ever exceed the maximum timeout period. Extend timeout period to 1 second per command, so that an accidental timeout will never occur.
|
|
|
|
| |
project name. Add AVRStudio project file for the AVRISP-MKII project.
|
| |
|
|
|
|
| |
BluetoothEvents.c/.h set of files for clarity in the Incomplete BluetoothHost demo. Add a new stack callback for opened ACL channels, make the demo save the RFCOMM channel when opened so that it does not have to search for it on each iteration of the main program loop.
|
|
|
|
|
|
| |
functions that are more complicated than simple macros. Moved USB_Device_SendRemoteWakeup() to the new Device.c source file and corrected it to unfreeze and restart the USB controller clock before issuing a Remote Wakeup request.
Removed the USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros, as they are now obsolete.
|
| |
|
|
|
|
| |
than looping on the timeout value, as this is already checked inside the loop anyway.
|
|
|
|
| |
XPLAINBridge project loops and into the AVRISP management function.
|
| |
|
|
|
|
| |
the new 1.7 Doxygen's default stylesheet is much better.
|
| |
|
| |
|
|
|
|
| |
Reduce the size of the attribute search list from 15 ranges to 8 to save RAM.
|
|
|
|
|
|
| |
the AVRISP-MKII programmer project to set the VTARGET reference voltage and scale factor.
Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host.
|
|
|
|
|
|
| |
of eeprom_write_byte(), so that only changed bytes are written to EEPROM to preserve its lifespan.
Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile parameters to EEPROM to preserve its lifespan.
|
|
|
|
| |
an ultra lightweight buffer to help improve the reliability of the bridge.
|
| |
|
|
|
|
| |
Protocol code so that it can now correctly match against UUIDs in the service table.
|
| |
|
|
|
|
| |
XMEGA targets when writing to the EEPROM instead of the split write-only command (thanks to Tim Margush).
|
|
|
|
| |
after programming or reading from the last page of FLASH.
|
|
|
|
|
|
| |
request handler of DevChapter9, which broke Set Configuration requests to the device under most circumstances.
Move out the SPI prescaler list to a PROGMEM module-level variable in ISPTarget.c.
|
| |
|
|
|
|
|
|
| |
commands when the extended address boundary is crossed during programming or readback (thanks to Gerard Sexton).
Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled.
|
|
|
|
|
|
| |
AVRISP-MKII projects has been renamed LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver.
Fix Benito makefile which was accidentally changed during testing.
|
|
|
|
| |
correctly converted to the target system's native end of line style.
|
|
|
|
| |
the make tool to be overridden.
|
|
|
|
| |
was very buggy. PDI and TPI must now be implemented via seperate headers instead of the one unified ISP/TPI/PDI header.
|
|
|
|
|
|
|
|
| |
sets the address to 0x00.
Fixed Set Configuration requests not being stalled until the host has set the device's address.
Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte read (thanks to Andrei Krainev).
|
|
|
|
| |
that the stream functions early-abort if the bus is suspended before or during a transfer.
|
|
|
|
| |
project.
|
|
|
|
| |
was failing, and only one or two cycles could be shaved off the compiler generated code.
|
|
|
|
|
|
| |
interrupt itself interruptable and use a seperate assembly file to hand-optimize the ISR code.
Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be selected (thanks to Steffan).
|
|
|
|
| |
while waiting on more bytes in the AVRISP MKII clone project.
|
|
|
|
| |
project abort properly if a timeout occurs while waiting for a response.
|
|
|
|
| |
LowLevel directory as it is hardware-dependent.
|
|
|
|
| |
be done in the user application once all init code has run.
|
|
|
|
| |
keeping track of timeouts while waiting for a Tx/Rx to finish.
|
|
|
|
|
|
|
|
|
|
| |
the BluetoothHost demo.
Added new HCI states to properly initialize the bluetooth dongle and retrieve the local BDADDR.
Factored out Bluetooth state information into a new state structure for easy reference in the user application.
Added new StackInitialized() Bluetooth stack callback function.
|
|
|
|
| |
Ensure that the AVRISP-MKII project's Windows avrdude compatibility define is named properly in all parts of the code.
|
|
|
|
|
|
|
|
| |
connections from remote devices. Add in ability to reject connections based on their bluetooth device address.
Clean up RelayBoard project code.
Make AVRISP project clear the XMEGA target's reset register twice; this does not appear to take affect properly the first time under some circumstances.
|
|
|
|
| |
to make the code compatible with Windows builds of avrdude at the expense of AVRStudio compatibility.
|
|
|
|
|
|
| |
sub-elements in the Device mode demos, bootloaders and projects.
Fix errors in the MouseHostWithParser demo from incorrect use of the HID_ALIGN_DATA() macro.
|
|
|
|
| |
project.
|
| |
|
|
|
|
| |
PDI mode - clearing the XMEGA's reset control register twice is enough to release it from reset. Possible silicon bug, since the official Atmel programmers have the same issue.
|
|
|
|
|
|
| |
programming mode correctly (clear target Reset key twice, set /RESET pin to pullup).
Add newlines to the MIDI event printf() statements in the MIDI host demos.
|
| |
|
|
|
|
|
|
| |
peripheral driver is eventually ported. Make architecture includes explicit for both the AVR32 and the AVR8, to make way for future architecture ports.
Add SPI driver aliases for the old function names in the AVR8 driver, so that existing code will still compile against the new version.
|