From 359fbfe14d00ab378f85a36664820ea9ba538c3f Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 10 May 2012 19:24:58 +0000 Subject: Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros. --- Bootloaders/CDC/BootloaderCDC.c | 48 +- Bootloaders/CDC/BootloaderCDC.h | 5 + Bootloaders/CDC/BootloaderCDC.txt | 6 +- Bootloaders/CDC/Config/AppConfig.h | 50 + Bootloaders/CDC/Config/LUFAConfig.h | 93 + Bootloaders/CDC/Descriptors.c | 10 +- Bootloaders/CDC/Descriptors.h | 12 +- Bootloaders/CDC/makefile | 21 +- Bootloaders/DFU/BootloaderDFU.c | 24 + Bootloaders/DFU/BootloaderDFU.h | 5 + Bootloaders/DFU/BootloaderDFU.txt | 6 +- Bootloaders/DFU/Descriptors.c | 2 +- Bootloaders/DFU/makefile | 2 +- Bootloaders/HID/BootloaderHID.c | 30 +- Bootloaders/HID/BootloaderHID.h | 5 + Bootloaders/HID/BootloaderHID.txt | 8 +- Bootloaders/HID/Descriptors.c | 4 +- Bootloaders/HID/Descriptors.h | 4 +- Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c | 4 - Bootloaders/HID/makefile | 2 +- BuildTests/BoardDriverTest/Board/Buttons.h | 90 + BuildTests/BoardDriverTest/Board/Dataflash.h | 195 +++ BuildTests/BoardDriverTest/Board/Joystick.h | 102 ++ BuildTests/BoardDriverTest/Board/LEDs.h | 130 ++ BuildTests/BoardDriverTest/BoardDeviceMap.cfg | 51 + BuildTests/BoardDriverTest/Test.c | 77 + BuildTests/BoardDriverTest/makefile | 63 + BuildTests/BoardDriverTest/makefile.avr8 | 722 ++++++++ BuildTests/BoardDriverTest/makefile.uc3 | 485 ++++++ BuildTests/BoardDriverTest/makefile.xmega | 704 ++++++++ BuildTests/ModuleTest/makefile | 24 +- BuildTests/SingleUSBModeTest/makefile | 30 +- BuildTests/StaticAnalysisTest/makefile | 3 +- BuildTests/makefile | 5 +- Demos/Device/ClassDriver/AudioInput/AudioInput.c | 11 +- Demos/Device/ClassDriver/AudioInput/Descriptors.c | 2 +- Demos/Device/ClassDriver/AudioInput/Descriptors.h | 11 +- Demos/Device/ClassDriver/AudioOutput/AudioOutput.c | 11 +- Demos/Device/ClassDriver/AudioOutput/Descriptors.c | 2 +- Demos/Device/ClassDriver/AudioOutput/Descriptors.h | 11 +- .../ClassDriver/DualVirtualSerial/Descriptors.c | 20 +- .../ClassDriver/DualVirtualSerial/Descriptors.h | 24 +- .../DualVirtualSerial/DualVirtualSerial.c | 63 +- Demos/Device/ClassDriver/GenericHID/Descriptors.c | 4 +- Demos/Device/ClassDriver/GenericHID/Descriptors.h | 4 +- Demos/Device/ClassDriver/GenericHID/GenericHID.c | 11 +- Demos/Device/ClassDriver/Joystick/Descriptors.c | 4 +- Demos/Device/ClassDriver/Joystick/Descriptors.h | 4 +- Demos/Device/ClassDriver/Joystick/Joystick.c | 11 +- Demos/Device/ClassDriver/Keyboard/Descriptors.c | 4 +- Demos/Device/ClassDriver/Keyboard/Descriptors.h | 4 +- Demos/Device/ClassDriver/Keyboard/Keyboard.c | 11 +- .../Device/ClassDriver/KeyboardMouse/Descriptors.c | 8 +- .../Device/ClassDriver/KeyboardMouse/Descriptors.h | 8 +- .../ClassDriver/KeyboardMouse/KeyboardMouse.c | 21 +- .../KeyboardMouseMultiReport/Descriptors.c | 4 +- .../KeyboardMouseMultiReport/Descriptors.h | 4 +- .../KeyboardMouseMultiReport.c | 11 +- Demos/Device/ClassDriver/MIDI/Descriptors.c | 8 +- Demos/Device/ClassDriver/MIDI/Descriptors.h | 8 +- Demos/Device/ClassDriver/MIDI/MIDI.c | 25 +- Demos/Device/ClassDriver/MassStorage/Descriptors.c | 8 +- Demos/Device/ClassDriver/MassStorage/Descriptors.h | 8 +- Demos/Device/ClassDriver/MassStorage/MassStorage.c | 21 +- .../ClassDriver/MassStorageKeyboard/Descriptors.c | 12 +- .../ClassDriver/MassStorageKeyboard/Descriptors.h | 12 +- .../MassStorageKeyboard/MassStorageKeyboard.c | 32 +- Demos/Device/ClassDriver/Mouse/Descriptors.c | 4 +- Demos/Device/ClassDriver/Mouse/Descriptors.h | 14 +- Demos/Device/ClassDriver/Mouse/Mouse.c | 11 +- .../Device/ClassDriver/RNDISEthernet/Descriptors.c | 10 +- .../Device/ClassDriver/RNDISEthernet/Descriptors.h | 12 +- .../ClassDriver/RNDISEthernet/RNDISEthernet.c | 31 +- .../Device/ClassDriver/VirtualSerial/Descriptors.c | 10 +- .../Device/ClassDriver/VirtualSerial/Descriptors.h | 12 +- .../ClassDriver/VirtualSerial/VirtualSerial.c | 32 +- .../VirtualSerialMassStorage/Descriptors.c | 18 +- .../VirtualSerialMassStorage/Descriptors.h | 20 +- .../VirtualSerialMassStorage.c | 51 +- .../ClassDriver/VirtualSerialMouse/Descriptors.c | 14 +- .../ClassDriver/VirtualSerialMouse/Descriptors.h | 16 +- .../VirtualSerialMouse/VirtualSerialMouse.c | 41 +- Demos/Device/Incomplete/Sideshow/Descriptors.c | 4 +- Demos/Device/Incomplete/Sideshow/Descriptors.h | 4 +- .../Incomplete/Sideshow/Lib/SideshowCommands.c | 32 +- Demos/Device/Incomplete/Sideshow/Sideshow.c | 8 +- .../Incomplete/TestAndMeasurement/Descriptors.c | 10 +- .../Incomplete/TestAndMeasurement/Descriptors.h | 16 +- .../TestAndMeasurement/TestAndMeasurement.c | 13 +- Demos/Device/LowLevel/AudioInput/AudioInput.c | 9 +- Demos/Device/LowLevel/AudioInput/Descriptors.c | 2 +- Demos/Device/LowLevel/AudioInput/Descriptors.h | 11 +- Demos/Device/LowLevel/AudioOutput/AudioOutput.c | 9 +- Demos/Device/LowLevel/AudioOutput/Descriptors.c | 2 +- Demos/Device/LowLevel/AudioOutput/Descriptors.h | 11 +- .../LowLevel/DualVirtualSerial/Descriptors.c | 20 +- .../LowLevel/DualVirtualSerial/Descriptors.h | 24 +- .../LowLevel/DualVirtualSerial/DualVirtualSerial.c | 26 +- Demos/Device/LowLevel/GenericHID/Descriptors.c | 8 +- Demos/Device/LowLevel/GenericHID/Descriptors.h | 8 +- Demos/Device/LowLevel/GenericHID/GenericHID.c | 10 +- Demos/Device/LowLevel/Joystick/Descriptors.c | 4 +- Demos/Device/LowLevel/Joystick/Descriptors.h | 4 +- Demos/Device/LowLevel/Joystick/Joystick.c | 5 +- Demos/Device/LowLevel/Keyboard/Descriptors.c | 8 +- Demos/Device/LowLevel/Keyboard/Descriptors.h | 8 +- Demos/Device/LowLevel/Keyboard/Keyboard.c | 10 +- Demos/Device/LowLevel/KeyboardMouse/Descriptors.c | 12 +- Demos/Device/LowLevel/KeyboardMouse/Descriptors.h | 12 +- .../Device/LowLevel/KeyboardMouse/KeyboardMouse.c | 15 +- Demos/Device/LowLevel/MIDI/Descriptors.c | 8 +- Demos/Device/LowLevel/MIDI/Descriptors.h | 8 +- Demos/Device/LowLevel/MIDI/MIDI.c | 15 +- Demos/Device/LowLevel/MassStorage/Descriptors.c | 8 +- Demos/Device/LowLevel/MassStorage/Descriptors.h | 8 +- Demos/Device/LowLevel/MassStorage/MassStorage.c | 24 +- Demos/Device/LowLevel/Mouse/Descriptors.c | 4 +- Demos/Device/LowLevel/Mouse/Descriptors.h | 14 +- Demos/Device/LowLevel/Mouse/Mouse.c | 5 +- Demos/Device/LowLevel/RNDISEthernet/Descriptors.c | 10 +- Demos/Device/LowLevel/RNDISEthernet/Descriptors.h | 12 +- .../Device/LowLevel/RNDISEthernet/RNDISEthernet.c | 15 +- Demos/Device/LowLevel/VirtualSerial/Descriptors.c | 10 +- Demos/Device/LowLevel/VirtualSerial/Descriptors.h | 12 +- .../Device/LowLevel/VirtualSerial/VirtualSerial.c | 13 +- .../ClassDriver/MouseHostDevice/Descriptors.c | 4 +- .../ClassDriver/MouseHostDevice/Descriptors.h | 4 +- .../ClassDriver/MouseHostDevice/DeviceFunctions.c | 11 +- .../ClassDriver/MouseHostDevice/HostFunctions.c | 13 +- .../AndroidAccessoryHost/AndroidAccessoryHost.c | 16 +- .../ClassDriver/AudioInputHost/AudioInputHost.c | 7 +- .../ClassDriver/AudioOutputHost/AudioOutputHost.c | 7 +- .../JoystickHostWithParser.c | 17 +- Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c | 16 +- .../KeyboardHostWithParser.c | 17 +- Demos/Host/ClassDriver/MIDIHost/MIDIHost.c | 22 +- .../ClassDriver/MassStorageHost/MassStorageHost.c | 15 +- Demos/Host/ClassDriver/MouseHost/MouseHost.c | 16 +- .../MouseHostWithParser/MouseHostWithParser.c | 17 +- Demos/Host/ClassDriver/PrinterHost/PrinterHost.c | 15 +- .../RNDISEthernetHost/RNDISEthernetHost.c | 26 +- .../ClassDriver/StillImageHost/StillImageHost.c | 23 +- .../VirtualSerialHost/VirtualSerialHost.c | 23 +- .../Incomplete/BluetoothHost/ConfigDescriptor.c | 9 +- .../Incomplete/BluetoothHost/ConfigDescriptor.h | 6 +- .../AndroidAccessoryHost/ConfigDescriptor.c | 6 +- .../AndroidAccessoryHost/ConfigDescriptor.h | 7 +- .../LowLevel/AudioInputHost/ConfigDescriptor.c | 3 +- .../LowLevel/AudioInputHost/ConfigDescriptor.h | 4 +- Demos/Host/LowLevel/AudioInputHost/Doxygen.conf | 2 +- .../LowLevel/AudioOutputHost/ConfigDescriptor.c | 3 +- .../LowLevel/AudioOutputHost/ConfigDescriptor.h | 4 +- Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf | 2 +- .../LowLevel/GenericHIDHost/ConfigDescriptor.c | 6 +- .../LowLevel/GenericHIDHost/ConfigDescriptor.h | 8 +- .../JoystickHostWithParser/ConfigDescriptor.c | 3 +- .../JoystickHostWithParser/ConfigDescriptor.h | 4 +- .../LowLevel/JoystickHostWithParser/Doxygen.conf | 2 +- .../Host/LowLevel/KeyboardHost/ConfigDescriptor.c | 3 +- .../Host/LowLevel/KeyboardHost/ConfigDescriptor.h | 4 +- .../KeyboardHostWithParser/ConfigDescriptor.c | 3 +- .../KeyboardHostWithParser/ConfigDescriptor.h | 4 +- .../LowLevel/KeyboardHostWithParser/Doxygen.conf | 2 +- Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c | 6 +- Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h | 8 +- Demos/Host/LowLevel/MIDIHost/MIDIHost.c | 7 +- .../LowLevel/MassStorageHost/ConfigDescriptor.c | 6 +- .../LowLevel/MassStorageHost/ConfigDescriptor.h | 8 +- Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c | 3 +- Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h | 4 +- .../MouseHostWithParser/ConfigDescriptor.c | 3 +- .../MouseHostWithParser/ConfigDescriptor.h | 4 +- .../Host/LowLevel/MouseHostWithParser/Doxygen.conf | 2 +- Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c | 6 +- Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h | 8 +- .../LowLevel/RNDISEthernetHost/ConfigDescriptor.c | 9 +- .../LowLevel/RNDISEthernetHost/ConfigDescriptor.h | 12 +- .../LowLevel/StillImageHost/ConfigDescriptor.c | 9 +- .../LowLevel/StillImageHost/ConfigDescriptor.h | 12 +- .../LowLevel/VirtualSerialHost/ConfigDescriptor.c | 9 +- .../LowLevel/VirtualSerialHost/ConfigDescriptor.h | 12 +- LUFA.pnproj | 2 +- LUFA/CodeTemplates/LUFAConfig.h | 4 + LUFA/Common/ArchitectureSpecific.h | 55 +- LUFA/Common/BoardTypes.h | 10 + LUFA/DoxygenPages/ChangeLog.txt | 30 + LUFA/DoxygenPages/DeviceSupport.txt | 38 + LUFA/DoxygenPages/FutureChanges.txt | 2 - LUFA/DoxygenPages/KnownIssues.txt | 40 + LUFA/DoxygenPages/LUFAPoweredProjects.txt | 2 + LUFA/DoxygenPages/LibraryResources.txt | 5 +- LUFA/DoxygenPages/MainPage.txt | 1 + LUFA/DoxygenPages/MigrationInformation.txt | 25 +- LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h | 17 +- LUFA/Drivers/Board/AVR8/BENITO/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/BENITO/LEDs.h | 8 +- LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h | 11 +- LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h | 10 +- LUFA/Drivers/Board/AVR8/BUI/LEDs.h | 9 +- LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h | 5 + LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h | 10 +- LUFA/Drivers/Board/AVR8/CULV3/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/CULV3/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/DUCE/LEDs.h | 147 ++ LUFA/Drivers/Board/AVR8/EVK527/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h | 5 + LUFA/Drivers/Board/AVR8/EVK527/Joystick.h | 5 + LUFA/Drivers/Board/AVR8/EVK527/LEDs.h | 9 +- LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h | 8 +- LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h | 12 + LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h | 15 +- LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h | 16 +- LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h | 11 +- LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h | 103 ++ LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h | 179 ++ LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h | 103 ++ LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h | 169 ++ LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h | 12 +- LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/STK525/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/STK525/Dataflash.h | 5 + LUFA/Drivers/Board/AVR8/STK525/Joystick.h | 7 +- LUFA/Drivers/Board/AVR8/STK525/LEDs.h | 10 +- LUFA/Drivers/Board/AVR8/STK526/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/STK526/Dataflash.h | 5 + LUFA/Drivers/Board/AVR8/STK526/Joystick.h | 5 + LUFA/Drivers/Board/AVR8/STK526/LEDs.h | 10 +- LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h | 14 +- LUFA/Drivers/Board/AVR8/TUL/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/TUL/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/UDIP/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/UDIP/LEDs.h | 12 +- LUFA/Drivers/Board/AVR8/UNO/LEDs.h | 8 +- LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h | 44 +- LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h | 7 +- LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h | 6 + LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h | 5 + LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h | 10 +- LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h | 5 + LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h | 9 +- LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h | 13 + LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h | 7 +- LUFA/Drivers/Board/Buttons.h | 4 + LUFA/Drivers/Board/LEDs.h | 12 +- LUFA/Drivers/Board/UC3/EVK1100/Buttons.h | 7 + LUFA/Drivers/Board/UC3/EVK1100/Joystick.h | 5 + LUFA/Drivers/Board/UC3/EVK1100/LEDs.h | 12 + LUFA/Drivers/Board/UC3/EVK1101/Buttons.h | 6 + LUFA/Drivers/Board/UC3/EVK1101/Joystick.h | 5 + LUFA/Drivers/Board/UC3/EVK1101/LEDs.h | 8 + LUFA/Drivers/Board/UC3/EVK1104/Buttons.h | 5 + LUFA/Drivers/Board/UC3/EVK1104/LEDs.h | 8 + LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h | 7 + LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h | 18 +- LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h | 6 + LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h | 8 + LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h | 26 +- LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h | 9 + LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h | 9 +- LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h | 11 +- LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h | 15 +- LUFA/Drivers/USB/Class/Device/AudioClassDevice.c | 57 +- LUFA/Drivers/USB/Class/Device/AudioClassDevice.h | 25 +- LUFA/Drivers/USB/Class/Device/CDCClassDevice.c | 69 +- LUFA/Drivers/USB/Class/Device/CDCClassDevice.h | 18 +- LUFA/Drivers/USB/Class/Device/HIDClassDevice.c | 14 +- LUFA/Drivers/USB/Class/Device/HIDClassDevice.h | 4 +- LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c | 46 +- LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h | 9 +- .../USB/Class/Device/MassStorageClassDevice.c | 62 +- .../USB/Class/Device/MassStorageClassDevice.h | 9 +- LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c | 59 +- LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h | 14 +- .../USB/Class/Host/AndroidAccessoryClassHost.c | 64 +- .../USB/Class/Host/AndroidAccessoryClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/AudioClassHost.c | 58 +- LUFA/Drivers/USB/Class/Host/AudioClassHost.h | 17 +- LUFA/Drivers/USB/Class/Host/CDCClassHost.c | 90 +- LUFA/Drivers/USB/Class/Host/CDCClassHost.h | 15 +- LUFA/Drivers/USB/Class/Host/HIDClassHost.c | 68 +- LUFA/Drivers/USB/Class/Host/HIDClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/MIDIClassHost.c | 83 +- LUFA/Drivers/USB/Class/Host/MIDIClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c | 74 +- LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/PrinterClassHost.c | 64 +- LUFA/Drivers/USB/Class/Host/PrinterClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/RNDISClassHost.c | 80 +- LUFA/Drivers/USB/Class/Host/RNDISClassHost.h | 15 +- LUFA/Drivers/USB/Class/Host/StillImageClassHost.c | 92 +- LUFA/Drivers/USB/Class/Host/StillImageClassHost.h | 15 +- LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c | 15 + LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h | 175 +- LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c | 8 +- LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c | 34 +- LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h | 116 +- LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c | 3 +- LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c | 3 +- LUFA/Drivers/USB/Core/DeviceStandardReq.c | 6 +- LUFA/Drivers/USB/Core/Endpoint.h | 12 + LUFA/Drivers/USB/Core/Pipe.h | 18 +- LUFA/Drivers/USB/Core/StdDescriptors.h | 12 +- LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c | 17 + LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h | 205 +-- LUFA/Drivers/USB/Core/UC3/Host_UC3.c | 8 +- LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c | 34 +- LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h | 124 +- LUFA/Drivers/USB/Core/UC3/USBController_UC3.c | 3 +- LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c | 3 +- LUFA/Drivers/USB/Core/USBController.h | 18 + LUFA/Drivers/USB/Core/USBMode.h | 18 + LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h | 12 +- LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c | 30 +- LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h | 182 +- LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c | 19 +- LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h | 4 +- LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c | 3 +- LUFA/Drivers/USB/USB.h | 26 +- LUFA/Platform/XMEGA/ClockManagement.h | 36 +- Maintenance/makefile | 10 +- Projects/AVRISP-MKII/AVRISP-MKII.c | 8 +- Projects/AVRISP-MKII/Descriptors.c | 4 +- Projects/AVRISP-MKII/Descriptors.h | 17 +- Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c | 18 +- Projects/AVRISP-MKII/Lib/V2Protocol.c | 12 +- Projects/AVRISP-MKII/Lib/V2ProtocolParams.c | 2 +- Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c | 2 + Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c | 16 +- Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 2 +- Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c | 2 +- Projects/Benito/Benito.c | 32 +- Projects/Benito/Descriptors.c | 10 +- Projects/Benito/Descriptors.h | 12 +- Projects/HIDReportViewer/HIDReportViewer.c | 17 +- .../Incomplete/StandaloneProgrammer/Descriptors.c | 8 +- .../Incomplete/StandaloneProgrammer/Descriptors.h | 20 +- .../Incomplete/StandaloneProgrammer/DiskDevice.c | 21 +- .../Incomplete/StandaloneProgrammer/DiskHost.c | 15 +- .../StandaloneProgrammer/Lib/PetiteFATFs/diskio.c | 2 +- Projects/LEDNotifier/Descriptors.c | 10 +- Projects/LEDNotifier/Descriptors.h | 12 +- Projects/LEDNotifier/LEDNotifier.c | 32 +- Projects/MIDIToneGenerator/Descriptors.c | 8 +- Projects/MIDIToneGenerator/Descriptors.h | 8 +- Projects/MIDIToneGenerator/MIDIToneGenerator.c | 24 +- Projects/Magstripe/Descriptors.c | 4 +- Projects/Magstripe/Descriptors.h | 4 +- Projects/Magstripe/Magstripe.c | 11 +- Projects/MediaController/Descriptors.c | 4 +- Projects/MediaController/Descriptors.h | 8 +- Projects/MediaController/MediaController.c | 11 +- Projects/MissileLauncher/ConfigDescriptor.c | 6 +- Projects/MissileLauncher/ConfigDescriptor.h | 8 +- Projects/RelayBoard/Doxygen.conf | 2 +- Projects/SerialToLCD/Descriptors.c | 272 +++ Projects/SerialToLCD/Descriptors.h | 90 + Projects/SerialToLCD/Doxygen.conf | 1814 ++++++++++++++++++++ Projects/SerialToLCD/Lib/HD44780.c | 127 ++ Projects/SerialToLCD/Lib/HD44780.h | 64 + Projects/SerialToLCD/SerialToLCD.c | 168 ++ Projects/SerialToLCD/SerialToLCD.h | 63 + Projects/SerialToLCD/SerialToLCD.txt | 97 ++ Projects/SerialToLCD/makefile | 731 ++++++++ Projects/TempDataLogger/Descriptors.c | 12 +- Projects/TempDataLogger/Descriptors.h | 12 +- Projects/TempDataLogger/TempDataLogger.c | 32 +- Projects/USBtoSerial/Descriptors.c | 10 +- Projects/USBtoSerial/Descriptors.h | 12 +- Projects/USBtoSerial/USBtoSerial.c | 30 +- Projects/Webserver/Descriptors.c | 18 +- Projects/Webserver/Descriptors.h | 20 +- Projects/Webserver/USBDeviceMode.c | 54 +- Projects/Webserver/USBHostMode.c | 26 +- Projects/XPLAINBridge/AVRISPDescriptors.c | 4 +- Projects/XPLAINBridge/AVRISPDescriptors.h | 17 +- Projects/XPLAINBridge/Doxygen.conf | 2 +- Projects/XPLAINBridge/USARTDescriptors.c | 10 +- Projects/XPLAINBridge/USARTDescriptors.h | 12 +- Projects/XPLAINBridge/XPLAINBridge.c | 38 +- Projects/XPLAINBridge/XPLAINBridge.h | 2 - Projects/XPLAINBridge/XPLAINBridge.txt | 5 - Projects/makefile | 4 + 395 files changed, 9921 insertions(+), 2765 deletions(-) create mode 100644 Bootloaders/CDC/Config/AppConfig.h create mode 100644 Bootloaders/CDC/Config/LUFAConfig.h create mode 100644 BuildTests/BoardDriverTest/Board/Buttons.h create mode 100644 BuildTests/BoardDriverTest/Board/Dataflash.h create mode 100644 BuildTests/BoardDriverTest/Board/Joystick.h create mode 100644 BuildTests/BoardDriverTest/Board/LEDs.h create mode 100644 BuildTests/BoardDriverTest/BoardDeviceMap.cfg create mode 100644 BuildTests/BoardDriverTest/Test.c create mode 100644 BuildTests/BoardDriverTest/makefile create mode 100644 BuildTests/BoardDriverTest/makefile.avr8 create mode 100644 BuildTests/BoardDriverTest/makefile.uc3 create mode 100644 BuildTests/BoardDriverTest/makefile.xmega create mode 100644 LUFA/DoxygenPages/KnownIssues.txt create mode 100644 LUFA/Drivers/Board/AVR8/DUCE/LEDs.h create mode 100644 LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h create mode 100644 LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h create mode 100644 LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h create mode 100644 LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h create mode 100644 Projects/SerialToLCD/Descriptors.c create mode 100644 Projects/SerialToLCD/Descriptors.h create mode 100644 Projects/SerialToLCD/Doxygen.conf create mode 100644 Projects/SerialToLCD/Lib/HD44780.c create mode 100644 Projects/SerialToLCD/Lib/HD44780.h create mode 100644 Projects/SerialToLCD/SerialToLCD.c create mode 100644 Projects/SerialToLCD/SerialToLCD.h create mode 100644 Projects/SerialToLCD/SerialToLCD.txt create mode 100644 Projects/SerialToLCD/makefile diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c index e9ea8ae35..211b054e3 100644 --- a/Bootloaders/CDC/BootloaderCDC.c +++ b/Bootloaders/CDC/BootloaderCDC.c @@ -56,6 +56,28 @@ static uint32_t CurrAddress; */ static bool RunBootloader = true; +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint32_t MagicBootKey ATTR_NO_INIT; + + +/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application + * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, + * this will force the user application to start via a software jump. + */ +void Application_Jump_Check(void) +{ + /* If the reset source was the bootloader and the key is correct, clear it and jump to the application */ + if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) + { + MagicBootKey = 0; + // cppcheck-suppress constStatement + ((void (*)(void))0x0000)(); + } +} /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously * runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start @@ -80,6 +102,9 @@ int main(void) /* Disconnect from the host - USB interface will be reset later along with the AVR */ USB_Detach(); + + /* Unlock the forced application start mode of the bootloader if it is restarted */ + MagicBootKey = MAGIC_BOOT_KEY; /* Enable the watchdog and force a timeout to reset the AVR */ wdt_enable(WDTO_250MS); @@ -122,17 +147,12 @@ ISR(TIMER1_OVF_vect, ISR_BLOCK) void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup CDC Notification, Rx and Tx Endpoints */ - Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, + CDC_NOTIFICATION_EPSIZE, 1); - Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); - Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, - ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); } /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to @@ -303,7 +323,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command) static uint8_t FetchNextCommandByte(void) { /* Select the OUT endpoint so that the next data byte can be read */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* If OUT endpoint empty, clear it and wait for the next packet from the host */ while (!(Endpoint_IsReadWriteAllowed())) @@ -329,7 +349,7 @@ static uint8_t FetchNextCommandByte(void) static void WriteNextResponseByte(const uint8_t Response) { /* Select the IN endpoint so that the next data byte can be written */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* If IN endpoint full, clear it and wait until ready for the next packet to the host */ if (!(Endpoint_IsReadWriteAllowed())) @@ -353,7 +373,7 @@ static void WriteNextResponseByte(const uint8_t Response) static void CDC_Task(void) { /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Check if endpoint has a command in it sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -549,7 +569,7 @@ static void CDC_Task(void) } /* Select the IN endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Remember if the endpoint is completely full before clearing it */ bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed()); @@ -577,7 +597,7 @@ static void CDC_Task(void) } /* Select the OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Acknowledge the command from the host */ Endpoint_ClearOUT(); diff --git a/Bootloaders/CDC/BootloaderCDC.h b/Bootloaders/CDC/BootloaderCDC.h index 4b9e7d6d8..257e884e6 100644 --- a/Bootloaders/CDC/BootloaderCDC.h +++ b/Bootloaders/CDC/BootloaderCDC.h @@ -67,6 +67,9 @@ /** Eight character bootloader firmware identifier reported to the host when requested */ #define SOFTWARE_IDENTIFIER "LUFACDC" + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42CACA + /* Type Defines: */ /** Type define for a non-returning pointer to the start of the loaded application in flash memory. */ typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; @@ -75,6 +78,8 @@ static void CDC_Task(void); static void SetupHardware(void); + void Application_Jump_Check(void) ATTR_INIT_SECTION(3); + void EVENT_USB_Device_ConfigurationChanged(void); #if defined(INCLUDE_FROM_BOOTLOADERCDC_C) || defined(__DOXYGEN__) diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index d6ab94516..618b95d25 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 * protocol compatible programming software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If - * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU - * values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/CDC/Config/AppConfig.h b/Bootloaders/CDC/Config/AppConfig.h new file mode 100644 index 000000000..ae3e50e1d --- /dev/null +++ b/Bootloaders/CDC/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define NO_BLOCK_SUPPORT + #define NO_EEPROM_BYTE_SUPPORT + #define NO_FLASH_BYTE_SUPPORT + #define NO_LOCK_BYTE_WRITE_SUPPORT + +#endif \ No newline at end of file diff --git a/Bootloaders/CDC/Config/LUFAConfig.h b/Bootloaders/CDC/Config/LUFAConfig.h new file mode 100644 index 000000000..c5a01c2fa --- /dev/null +++ b/Bootloaders/CDC/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/CDC/Descriptors.c b/Bootloaders/CDC/Descriptors.c index 4bf3eced5..9c892f835 100644 --- a/Bootloaders/CDC/Descriptors.c +++ b/Bootloaders/CDC/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,20 +157,20 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Bootloaders/CDC/Descriptors.h b/Bootloaders/CDC/Descriptors.h index e5ef64102..0010fc69b 100644 --- a/Bootloaders/CDC/Descriptors.h +++ b/Bootloaders/CDC/Descriptors.h @@ -92,14 +92,14 @@ #error The selected AVR part is not currently supported by this bootloader. #endif - /** Endpoint number for the CDC control interface event notification endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address for the CDC control interface event notification endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number for the CDC data interface TX (data IN) endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address for the CDC data interface TX (data IN) endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number for the CDC data interface RX (data OUT) endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address for the CDC data interface RX (data OUT) endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size of the CDC data interface TX and RX data endpoint banks, in bytes. */ #define CDC_TXRX_EPSIZE 16 diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 066fb8884..b449ff0c6 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section, and the User Application @@ -124,22 +124,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS - -#LUFA_OPTS += -D NO_BLOCK_SUPPORT -#LUFA_OPTS += -D NO_EEPROM_BYTE_SUPPORT -#LUFA_OPTS += -D NO_FLASH_BYTE_SUPPORT -#LUFA_OPTS += -D NO_LOCK_BYTE_WRITE_SUPPORT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -184,7 +169,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c index 3ce2a6285..233e145ae 100644 --- a/Bootloaders/DFU/BootloaderDFU.c +++ b/Bootloaders/DFU/BootloaderDFU.c @@ -92,6 +92,27 @@ static uint16_t StartAddr = 0x0000; */ static uint16_t EndAddr = 0x0000; +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint32_t MagicBootKey ATTR_NO_INIT; + + +/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application + * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, + * this will force the user application to start via a software jump. + */ +void Application_Jump_Check(void) +{ + // If the reset source was the bootloader and the key is correct, clear it and jump to the application + if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) + { + MagicBootKey = 0; + AppStartPtr(); + } +} /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously * runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start @@ -695,6 +716,9 @@ static void ProcessWriteCommand(void) { if (SentCommand.Data[1] == 0x00) // Start via watchdog { + /* Unlock the forced application start mode of the bootloader if it is restarted */ + MagicBootKey = MAGIC_BOOT_KEY; + /* Start the watchdog to reset the AVR once the communications are finalized */ wdt_enable(WDTO_250MS); } diff --git a/Bootloaders/DFU/BootloaderDFU.h b/Bootloaders/DFU/BootloaderDFU.h index a80775348..46b70c0e9 100644 --- a/Bootloaders/DFU/BootloaderDFU.h +++ b/Bootloaders/DFU/BootloaderDFU.h @@ -66,6 +66,9 @@ /** Minor bootloader version number. */ #define BOOTLOADER_VERSION_REV 0 + + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42CACA /** Complete bootloader version number expressed as a packed byte, constructed from the * two individual bootloader version macros. @@ -206,6 +209,8 @@ static void ProcessWriteCommand(void); static void ProcessReadCommand(void); #endif + + void Application_Jump_Check(void) ATTR_INIT_SECTION(3); #endif diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index d0811b2aa..2c9eaf1de 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming * software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If - * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU - * values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/DFU/Descriptors.c b/Bootloaders/DFU/Descriptors.c index d55159060..ff33b6b64 100644 --- a/Bootloaders/DFU/Descriptors.c +++ b/Bootloaders/DFU/Descriptors.c @@ -111,7 +111,7 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = .DetachTimeout = 0x0000, .TransferSize = 0x0C00, - .DFUSpecification = VERSION_BCD(01.01) + .DFUSpecification = VERSION_BCD(01.10) } }; diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 608564ebe..f78ceb270 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section, and the User Application diff --git a/Bootloaders/HID/BootloaderHID.c b/Bootloaders/HID/BootloaderHID.c index 928000f8b..acc351a30 100644 --- a/Bootloaders/HID/BootloaderHID.c +++ b/Bootloaders/HID/BootloaderHID.c @@ -41,6 +41,29 @@ */ static bool RunBootloader = true; +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint32_t MagicBootKey ATTR_NO_INIT; + + +/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application + * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, + * this will force the user application to start via a software jump. + */ +void Application_Jump_Check(void) +{ + /* If the reset source was the bootloader and the key is correct, clear it and jump to the application */ + if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) + { + MagicBootKey = 0; + // cppcheck-suppress constStatement + ((void (*)(void))0x0000)(); + } +} + /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously * runs the bootloader processing routine until instructed to soft-exit. */ @@ -58,6 +81,9 @@ int main(void) /* Disconnect from the host - USB interface will be reset later along with the AVR */ USB_Detach(); + /* Unlock the forced application start mode of the bootloader if it is restarted */ + MagicBootKey = MAGIC_BOOT_KEY; + /* Enable the watchdog and force a timeout to reset the AVR */ wdt_enable(WDTO_250MS); @@ -85,9 +111,7 @@ static void SetupHardware(void) void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup HID Report Endpoint */ - Endpoint_ConfigureEndpoint(HID_IN_EPNUM, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, HID_IN_EPSIZE, - ENDPOINT_BANK_SINGLE); + Endpoint_ConfigureEndpoint(HID_IN_EPADDR, EP_TYPE_INTERRUPT, HID_IN_EPSIZE, 1); } /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to diff --git a/Bootloaders/HID/BootloaderHID.h b/Bootloaders/HID/BootloaderHID.h index ab5752d3c..af2812a7d 100644 --- a/Bootloaders/HID/BootloaderHID.h +++ b/Bootloaders/HID/BootloaderHID.h @@ -52,9 +52,14 @@ /** Bootloader special address to start the user application */ #define COMMAND_STARTAPPLICATION 0xFFFF + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42CACA + /* Function Prototypes: */ static void SetupHardware(void); + void Application_Jump_Check(void) ATTR_INIT_SECTION(3); + void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt index a774ab485..f6c084d65 100644 --- a/Bootloaders/HID/BootloaderHID.txt +++ b/Bootloaders/HID/BootloaderHID.txt @@ -51,10 +51,10 @@ * from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC * HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it. * - * Out of the box this bootloader builds for the USB1287, and will fit into 2KB of bootloader space for the - * Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for all other models. If you wish to - * enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU values in the - * accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 2KB of bootloader space for the Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for + * all other models. If you wish to alter this size and/or change the AVR model, you will need to edit the MCU, + * FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * \section Sec_Installation Driver Installation * diff --git a/Bootloaders/HID/Descriptors.c b/Bootloaders/HID/Descriptors.c index 5d4271e0c..c1ea8e30e 100644 --- a/Bootloaders/HID/Descriptors.c +++ b/Bootloaders/HID/Descriptors.c @@ -137,10 +137,10 @@ const USB_Descriptor_Configuration_t ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | HID_IN_EPNUM), + .EndpointAddress = HID_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_IN_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Bootloaders/HID/Descriptors.h b/Bootloaders/HID/Descriptors.h index 41c4ee402..ad216038a 100644 --- a/Bootloaders/HID/Descriptors.h +++ b/Bootloaders/HID/Descriptors.h @@ -55,8 +55,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the HID data IN endpoint. */ - #define HID_IN_EPNUM 1 + /** Endpoint address of the HID data IN endpoint. */ + #define HID_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the HID reporting IN endpoint. */ #define HID_IN_EPSIZE 64 diff --git a/Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c b/Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c index 6063e1981..c86b0da9c 100644 --- a/Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c +++ b/Bootloaders/HID/HostLoaderApp/hid_bootloader_cli.c @@ -970,13 +970,9 @@ void parse_options(int argc, char **argv) } else if (strncmp(arg, "-mmcu=", 6) == 0) { arg += 6; - uint8_t valid_prefix = 0; - if (strncmp(arg, "at90usb", 7) == 0) { - valid_prefix = 1; arg += 7; } else if (strncmp(arg, "atmega", 6) == 0) { - valid_prefix = 1; arg += 6; } else { die("Unknown MCU type\n"); diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index efbb6a645..bfefbf695 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section. These formulas diff --git a/BuildTests/BoardDriverTest/Board/Buttons.h b/BuildTests/BoardDriverTest/Board/Buttons.h new file mode 100644 index 000000000..8754721ef --- /dev/null +++ b/BuildTests/BoardDriverTest/Board/Buttons.h @@ -0,0 +1,90 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Button Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Buttons driver, + * for the control of physical board-mounted GPIO pushbuttons. + */ + +#ifndef __BUTTONS_USER_H__ +#define __BUTTONS_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_BUTTONS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Button mask for the first button on the board. */ + #define BUTTONS_BUTTON1 (1 << 0) + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Buttons_Init(void) + { + + } + + static inline void Buttons_Disable(void) + { + + } + + static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Buttons_GetStatus(void) + { + return 0; + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/BuildTests/BoardDriverTest/Board/Dataflash.h b/BuildTests/BoardDriverTest/Board/Dataflash.h new file mode 100644 index 000000000..72561e55b --- /dev/null +++ b/BuildTests/BoardDriverTest/Board/Dataflash.h @@ -0,0 +1,195 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Dataflash Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Dataflash + * driver. +*/ + +#ifndef __DATAFLASH_USER_H__ +#define __DATAFLASH_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_DATAFLASH_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define DATAFLASH_CHIPCS_MASK // TODO: Replace this with a mask of all the /CS pins of all Dataflashes + #define DATAFLASH_CHIPCS_DDR // TODO: Replace with the DDR register name for the board's Dataflash ICs + #define DATAFLASH_CHIPCS_PORT // TODO: Replace with the PORT register name for the board's Dataflash ICs + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Constant indicating the total number of dataflash ICs mounted on the selected board. */ + #define DATAFLASH_TOTALCHIPS 1 // TODO: Replace with the number of Dataflashes on the board, max 2 + + /** Mask for no dataflash chip selected. */ + #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK + + /** Mask for the first dataflash chip selected. */ + #define DATAFLASH_CHIP1 // TODO: Replace with mask to hold /CS of first Dataflash low, and all others high + + /** Mask for the second dataflash chip selected. */ + #define DATAFLASH_CHIP2 // TODO: Replace with mask to hold /CS of second Dataflash low, and all others high + + /** Internal main memory page size for the board's dataflash ICs. */ + #define DATAFLASH_PAGE_SIZE // TODO: Replace with the page size for the Dataflash ICs + + /** Total number of pages inside each of the board's dataflash ICs. */ + #define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs + + /* Inline Functions: */ + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. + * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. + */ + static inline void Dataflash_Init(void) + { + + } + + /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. + * + * \param[in] Byte Byte of data to send to the dataflash + * + * \return Last response byte from the dataflash + */ + static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) + { + return 0; + } + + /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. + * + * \param[in] Byte Byte of data to send to the dataflash + */ + static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline void Dataflash_SendByte(const uint8_t Byte) + { + + } + + /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. + * + * \return Last response byte from the dataflash + */ + static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Dataflash_ReceiveByte(void) + { + return 0; + } + + /** Determines the currently selected dataflash chip. + * + * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected + * or a DATAFLASH_CHIPn mask (where n is the chip number). + */ + static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Dataflash_GetSelectedChip(void) + { + return 0; + } + + /** Selects the given dataflash chip. + * + * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is + * the chip number). + */ + static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; + static inline void Dataflash_SelectChip(const uint8_t ChipMask) + { + + } + + /** Deselects the current dataflash chip, so that no dataflash is selected. */ + static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE; + static inline void Dataflash_DeselectChip(void) + { + + } + + /** Selects a dataflash IC from the given page number, which should range from 0 to + * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one + * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside + * the total number of pages contained in the boards dataflash ICs, all dataflash ICs + * are deselected. + * + * \param[in] PageAddress Address of the page to manipulate, ranging from + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + */ + static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) + { + + } + + /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive + * a new command. + */ + static inline void Dataflash_ToggleSelectedChipCS(void) + { + + } + + /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main + * memory page program or main memory to buffer transfer. + */ + static inline void Dataflash_WaitWhileBusy(void) + { + + } + + /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with + * dataflash commands which require a complete 24-bit address. + * + * \param[in] PageAddress Page address within the selected dataflash IC + * \param[in] BufferByte Address within the dataflash's buffer + */ + static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, const uint16_t BufferByte) + { + + } + +#endif + diff --git a/BuildTests/BoardDriverTest/Board/Joystick.h b/BuildTests/BoardDriverTest/Board/Joystick.h new file mode 100644 index 000000000..f4328389e --- /dev/null +++ b/BuildTests/BoardDriverTest/Board/Joystick.h @@ -0,0 +1,102 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board Joystick Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA Joystick + * driver, for a digital four-way (plus button) joystick. +*/ + +#ifndef __JOYSTICK_USER_H__ +#define __JOYSTICK_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_JOYSTICK_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Mask for the joystick being pushed in the left direction. */ + #define JOY_LEFT // TODO: Add mask to indicate joystick left position here + + /** Mask for the joystick being pushed in the right direction. */ + #define JOY_RIGHT // TODO: Add mask to indicate joystick right position here + + /** Mask for the joystick being pushed in the upward direction. */ + #define JOY_UP // TODO: Add mask to indicate joystick up position here + + /** Mask for the joystick being pushed in the downward direction. */ + #define JOY_DOWN // TODO: Add mask to indicate joystick down position here + + /** Mask for the joystick being pushed inward. */ + #define JOY_PRESS // TODO: Add mask to indicate joystick pressed position here + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Joystick_Init(void) + { + + } + + static inline void Joystick_Disable(void) + { + + } + + static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Joystick_GetStatus(void) + { + return 0; + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/BuildTests/BoardDriverTest/Board/LEDs.h b/BuildTests/BoardDriverTest/Board/LEDs.h new file mode 100644 index 000000000..a0346b258 --- /dev/null +++ b/BuildTests/BoardDriverTest/Board/LEDs.h @@ -0,0 +1,130 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Custom Board LED Hardware Driver (Template) + * + * This is a stub driver header file, for implementing custom board + * layout hardware with compatible LUFA board specific drivers. If + * the library is configured to use the BOARD_USER board mode, this + * driver file should be completed and copied into the "/Board/" folder + * inside the application's folder. + * + * This stub is for the board-specific component of the LUFA LEDs driver, + * for the LEDs (up to four) mounted on most development boards. +*/ + +#ifndef __LEDS_USER_H__ +#define __LEDS_USER_H__ + + /* Includes: */ + // TODO: Add any required includes here + +/* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 (1 << 0) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 1) + + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 (1 << 2) + + /** LED mask for the fourth LED on the board. */ + #define LEDS_LED4 (1 << 3) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4) + + /** LED mask for none of the board LEDs. */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + + } + + static inline void LEDs_Disable(void) + { + + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask) + { + + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return 0; + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + diff --git a/BuildTests/BoardDriverTest/BoardDeviceMap.cfg b/BuildTests/BoardDriverTest/BoardDeviceMap.cfg new file mode 100644 index 000000000..683b1819d --- /dev/null +++ b/BuildTests/BoardDriverTest/BoardDeviceMap.cfg @@ -0,0 +1,51 @@ +# BOARD DEFINE = {ARCH} : {MCU} : +BOARD_USER = avr8 : at90usb1287 : +BOARD_NONE = avr8 : at90usb1287 : +BOARD_USBKEY = avr8 : at90usb1287 : +BOARD_STK525 = avr8 : at90usb647 : +BOARD_STK526 = avr8 : at90usb162 : +BOARD_RZUSBSTICK = avr8 : at90usb1287 : +BOARD_ATAVRUSBRF01 = avr8 : at90usb1287 : +BOARD_BUMBLEB = avr8 : at90usb162 : +BOARD_XPLAIN = avr8 : at90usb1287 : +BOARD_XPLAIN_REV1 = avr8 : at90usb1287 : +BOARD_EVK527 = avr8 : atmega32u4 : +BOARD_TEENSY = avr8 : at90usb162 : +BOARD_USBTINYMKII = avr8 : at90usb162 : +BOARD_BENITO = avr8 : at90usb162 : +BOARD_JMDBU2 = avr8 : atmega32u2 : +BOARD_OLIMEX162 = avr8 : at90usb162 : +BOARD_UDIP = avr8 : atmega32u2 : +BOARD_BUI = avr8 : at90usb646 : +BOARD_UNO = avr8 : atmega8u2 : +BOARD_CULV3 = avr8 : atmega32u4 : +BOARD_BLACKCAT = avr8 : at90usb162 : +BOARD_MAXIMUS = avr8 : at90usb162 : +BOARD_MINIMUS = avr8 : atmega32u2 : +BOARD_ADAFRUITU4 = avr8 : atmega32u4 : +BOARD_MICROSIN162 = avr8 : atmega162 : +BOARD_USBFOO = avr8 : atmega162 : +BOARD_SPARKFUN8U2 = avr8 : atmega8u2 : +BOARD_EVK1101 = uc3 : uc3b0256 : +BOARD_TUL = avr8 : atmega32u4 : +BOARD_EVK1100 = uc3 : uc3a0512 : +BOARD_EVK1104 = uc3 : uc3a3256 : +BOARD_A3BU_XPLAINED = xmega : atxmega256a3bu : +BOARD_TEENSY2 = avr8 : at90usb646 : +BOARD_USB2AX = avr8 : atmega32u4 : +BOARD_USB2AX_V3 = avr8 : atmega32u4 : +BOARD_MICROPENDOUS_32U2 = avr8 : atmega32u2 : +BOARD_MICROPENDOUS_A = avr8 : at90usb1287 : +BOARD_MICROPENDOUS_1 = avr8 : at90usb162 : +BOARD_MICROPENDOUS_2 = avr8 : atmega32u4 : +BOARD_MICROPENDOUS_3 = avr8 : at90usb1287 : +BOARD_MICROPENDOUS_4 = avr8 : at90usb1287 : +BOARD_MICROPENDOUS_DIP = avr8 : at90usb1287 : +BOARD_MICROPENDOUS_REV1 = avr8 : at90usb1287 : +BOARD_MICROPENDOUS_REV2 = avr8 : at90usb1287 : +BOARD_B1_XPLAINED = xmega : atxmega128b1 : +BOARD_MULTIO = avr8 : at90usb162 : +BOARD_BIGMULTIO = avr8 : atmega32u4 : +BOARD_DUCE = avr8 : atmega32u2 : +BOARD_OLIMEX32U4 = avr8 : atmega32u4 : +BOARD_OLIMEXT32U4 = avr8 : atmega32u4 : \ No newline at end of file diff --git a/BuildTests/BoardDriverTest/Test.c b/BuildTests/BoardDriverTest/Test.c new file mode 100644 index 000000000..2d908cb66 --- /dev/null +++ b/BuildTests/BoardDriverTest/Test.c @@ -0,0 +1,77 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include +#include +#include +#include +#include + +int main(void) +{ + uint_reg_t Dummy; + + /* Buttons Compile Check */ + Buttons_Init(); + Dummy = Buttons_GetStatus(); + Buttons_Disable(); + + /* Dataflash Compile Check */ + Dataflash_Init(); + Dataflash_TransferByte(0); + Dataflash_SendByte(0); + Dummy = Dataflash_ReceiveByte(); + Dummy = Dataflash_GetSelectedChip(); + Dataflash_SelectChip(0); + Dataflash_DeselectChip(); + Dataflash_SelectChipFromPage(0); + Dataflash_ToggleSelectedChipCS(); + Dataflash_WaitWhileBusy(); + Dataflash_SendAddressBytes(0, 0); + + /* LEDs Compile Check */ + LEDs_Init(); + LEDs_TurnOnLEDs(LEDS_ALL_LEDS); + LEDs_TurnOffLEDs(LEDS_ALL_LEDS); + LEDs_SetAllLEDs(LEDS_ALL_LEDS); + LEDs_ChangeLEDs(LEDS_ALL_LEDS, LEDS_NO_LEDS); + LEDs_ToggleLEDs(LEDS_ALL_LEDS); + Dummy = LEDs_GetLEDs(); + LEDs_Disable(); + + /* Joystick Compile Check */ + Joystick_Init(); + Dummy = Joystick_GetStatus(); + Joystick_Disable(); + + (void)Dummy; +} + + diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile new file mode 100644 index 000000000..598d953b6 --- /dev/null +++ b/BuildTests/BoardDriverTest/makefile @@ -0,0 +1,63 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2011. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# + +# Makefile for the board driver build test. This +# test attempts to build a dummy project with all +# possible board targets using their respective +# compiler. + +# Path to the root of the LUFA tree to scan +LUFA_ROOT_PATH = ../.. + + +all: begin makeboardlist testboards clean end + +begin: + @echo Executing build test "BoardDriverTest". + @echo + +end: + @echo Build test "BoardDriverTest" complete. + @echo + +makeboardlist: + @grep "BOARD_" $(LUFA_ROOT_PATH)/LUFA/Common/BoardTypes.h | cut -d'#' -f2 | cut -d' ' -f2 | grep "BOARD_" > BoardList.txt + +testboards: + echo "buildtest:" > BuildMakefile + + @while read line; \ + do \ + build_cfg=`grep "$$line " BoardDeviceMap.cfg | sed 's/ //g' | cut -d'=' -f2-`; \ + \ + build_board=$$line; \ + build_arch=`echo $$build_cfg | cut -d':' -f1`; \ + build_mcu=`echo $$build_cfg | cut -d':' -f2`; \ + \ + if ( test -z "$$build_cfg" ); then \ + echo "No matching information set for board $$build_board"; \ + else \ + echo "Found board configuration for $$build_board - $$build_arch, $$build_mcu"; \ + \ + printf "\t@echo Building dummy project for $$build_board...\n" >> BuildMakefile; \ + printf "\tmake -s -f makefile.%s clean\n" $$build_arch >> BuildMakefile; \ + printf "\tmake -s -f makefile.%s MCU=%s BOARD=%s elf\n\n" $$build_arch $$build_mcu $$build_board >> BuildMakefile; \ + fi; \ + done < BoardList.txt + + $(MAKE) -f BuildMakefile buildtest + +clean: + rm -f BuildMakefile + rm -f BoardList.txt + $(MAKE) -f makefile.avr8 clean + $(MAKE) -f makefile.xmega clean + $(MAKE) -f makefile.uc3 clean + +%: + \ No newline at end of file diff --git a/BuildTests/BoardDriverTest/makefile.avr8 b/BuildTests/BoardDriverTest/makefile.avr8 new file mode 100644 index 000000000..1f0d7596f --- /dev/null +++ b/BuildTests/BoardDriverTest/makefile.avr8 @@ -0,0 +1,722 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = at90usb1287 + + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = NONE + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Test + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = Test.c + + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=c99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += $(LUFA_OPTS) +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -fno-split-wide-types +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = jtagmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) reset + +flip-ee: $(TARGET).hex $(TARGET).eep + $(COPY) $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + $(REMOVE) $(TARGET)eep.hex + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash $(TARGET).eep + dfu-programmer $(MCU) reset + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation \($(TARGET)\)... + @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + exit 1; \ + fi; + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ +debug gdb-config checksource diff --git a/BuildTests/BoardDriverTest/makefile.uc3 b/BuildTests/BoardDriverTest/makefile.uc3 new file mode 100644 index 000000000..7e75b5479 --- /dev/null +++ b/BuildTests/BoardDriverTest/makefile.uc3 @@ -0,0 +1,485 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = uc3a3256 + + +# Targeted chip architecture (see library "Architectures" documentation) +ARCH = UC3 + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = NONE + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This should be the frequency the system core runs at, after the system clock +# has been set up correctly and started. +F_CPU = 12000000 + + +# USB controller master clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency of the USB controller's clock generator in Hz. +# +# For the UC3 chips, this should be equal to 48MHz or 96MHz. +F_USB = 48000000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Test + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options and predefined tokens (add '-D' before each token) +LUFA_OPTS = + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = Test.c + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DARCH=ARCH_$(ARCH) +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += -DARCH=ARCH_$(ARCH) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += -DARCH=ARCH_$(ARCH) +CPPDEFS += $(LUFA_OPTS) + + +# Debugging level. +DEBUG = 3 + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +CFLAGS += -masm-addr-pseudos +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -ffunction-sections +CPPFLAGS += -fno-strict-aliasing +CPPFLAGS += -fno-exceptions +CPPFLAGS += -masm-addr-pseudos +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--gc-sections --rodata-writable +LDFLAGS += -Wl,--direct-data +#LDFLAGS += -T linker_script.x + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr32-gcc +OBJCOPY = avr32-objcopy +OBJDUMP = avr32-objdump +SIZE = avr32-size +AR = avr32-ar rcs +NM = avr32-nm +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) reset + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation \($(TARGET)\)... + @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + exit 1; \ + fi; + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex lss sym doxygen clean clean_list clean_doxygen \ +dfu flip checksource + diff --git a/BuildTests/BoardDriverTest/makefile.xmega b/BuildTests/BoardDriverTest/makefile.xmega new file mode 100644 index 000000000..5a048b8e3 --- /dev/null +++ b/BuildTests/BoardDriverTest/makefile.xmega @@ -0,0 +1,704 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = atxmega128a1u + + +# Targeted chip architecture (see library "Architectures" documentation) +ARCH = XMEGA + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = NONE + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This should be the frequency the system core runs at, after the system clock +# has been set up correctly and started. +F_CPU = 24000000 + + +# USB controller master clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency of the USB controller's clock generator in Hz. +# +# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low +# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode. +F_USB = 48000000 + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = Test + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = Test.c + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) +CDEFS += -DARCH=ARCH_$(ARCH) +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += -DARCH=ARCH_$(ARCH) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += -DARCH=ARCH_$(ARCH) +CPPDEFS += $(LUFA_OPTS) + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -ffunction-sections +CPPFLAGS += -fno-strict-aliasing +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = jtagmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) reset + +flip-ee: $(TARGET).hex $(TARGET).eep + $(COPY) $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + $(REMOVE) $(TARGET)eep.hex + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash $(TARGET).eep + dfu-programmer $(MCU) reset + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation \($(TARGET)\)... + @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + exit 1; \ + fi; + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ +debug gdb-config checksource diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile index 974a3ddbb..59700730c 100644 --- a/BuildTests/ModuleTest/makefile +++ b/BuildTests/ModuleTest/makefile @@ -15,7 +15,7 @@ # List of device families per architecture, one device per architecture sub-family AVR8_FAMILIES = at90usb1287 at90usb1286 atmega16u4 atmega16u2 at90usb162 -XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 +XMEGA_FAMILIES = atxmega128a1u atxmega128a3u atxmega256a3bu atxmega128a4u atxmega128b1 atxmega128b3 atxmega128c3 atxmega32c4 UC3_FAMILIES = uc3a0256 uc3a1256 uc3a3256 uc3a4256 uc3b0256 uc3b1256 # List of all device families, with a family postfix @@ -24,6 +24,10 @@ DEVICE_FAMILIES = $(AVR8_FAMILIES:%=%.avr8) $(XMEGA_FAMILIES:%=%.xmega) $(UC3_FA all: begin $(DEVICE_FAMILIES) clean end +arch_avr8: begin $(AVR8_FAMILIES:%=%.avr8) end +arch_xmega: begin $(XMEGA_FAMILIES:%=%.xmega) end +arch_uc3: begin $(UC3_FAMILIES:%=%.uc3) end + begin: @echo Executing build test "ModuleTest". @echo @@ -33,21 +37,21 @@ end: @echo %.avr8: - $(MAKE) -f makefile.avr8 clean -s - $(MAKE) -f makefile.avr8 all MCU=$(@:%.avr8=%) -s + $(MAKE) -s -f makefile.avr8 clean + $(MAKE) -s -f makefile.avr8 all MCU=$(@:%.avr8=%) elf %.xmega: - $(MAKE) -f makefile.xmega clean -s - $(MAKE) -f makefile.xmega all MCU=$(@:%.xmega=%) -s + $(MAKE) -s -f makefile.xmega clean + $(MAKE) -s -f makefile.xmega all MCU=$(@:%.xmega=%) elf %.uc3: - $(MAKE) -f makefile.uc3 clean -s - $(MAKE) -f makefile.uc3 all MCU=$(@:%.uc3=%) -s + $(MAKE) -s -f makefile.uc3 clean + $(MAKE) -s -f makefile.uc3 all MCU=$(@:%.uc3=%) elf clean: - $(MAKE) -f makefile.avr8 clean -s - $(MAKE) -f makefile.xmega clean -s - $(MAKE) -f makefile.uc3 clean -s + $(MAKE) -s -f makefile.avr8 clean + $(MAKE) -s -f makefile.xmega clean + $(MAKE) -s -f makefile.uc3 clean %: \ No newline at end of file diff --git a/BuildTests/SingleUSBModeTest/makefile b/BuildTests/SingleUSBModeTest/makefile index 701a4b930..725f4a50e 100644 --- a/BuildTests/SingleUSBModeTest/makefile +++ b/BuildTests/SingleUSBModeTest/makefile @@ -23,23 +23,23 @@ end: @echo compile: - $(MAKE) -f makefile.avr8 clean -s - $(MAKE) -f makefile.avr8 LUFA_OPTS='-D USB_DEVICE_ONLY' -s - $(MAKE) -f makefile.avr8 clean -s - $(MAKE) -f makefile.avr8 LUFA_OPTS='-D USB_HOST_ONLY' -s - - $(MAKE) -f makefile.xmega clean -s - $(MAKE) -f makefile.xmega LUFA_OPTS='-D USB_DEVICE_ONLY' -s - - $(MAKE) -f makefile.uc3 clean -s - $(MAKE) -f makefile.uc3 LUFA_OPTS='-D USB_DEVICE_ONLY' -s - $(MAKE) -f makefile.uc3 clean -s - $(MAKE) -f makefile.uc3 LUFA_OPTS='-D USB_HOST_ONLY' -s + $(MAKE) -s -f makefile.avr8 clean + $(MAKE) -s -f makefile.avr8 LUFA_OPTS='-D USB_DEVICE_ONLY' elf + $(MAKE) -s -f makefile.avr8 clean + $(MAKE) -s -f makefile.avr8 LUFA_OPTS='-D USB_HOST_ONLY' elf + + $(MAKE) -s -f makefile.xmega clean + $(MAKE) -s -f makefile.xmega LUFA_OPTS='-D USB_DEVICE_ONLY' elf + + $(MAKE) -s -f makefile.uc3 clean + $(MAKE) -s -f makefile.uc3 LUFA_OPTS='-D USB_DEVICE_ONLY' elf + $(MAKE) -s -f makefile.uc3 clean + $(MAKE) -s -f makefile.uc3 LUFA_OPTS='-D USB_HOST_ONLY' elf clean: - $(MAKE) -f makefile.avr8 clean -s - $(MAKE) -f makefile.xmega clean -s - $(MAKE) -f makefile.uc3 clean -s + $(MAKE) -s -f makefile.avr8 clean + $(MAKE) -s -f makefile.xmega clean + $(MAKE) -s -f makefile.uc3 clean %: \ No newline at end of file diff --git a/BuildTests/StaticAnalysisTest/makefile b/BuildTests/StaticAnalysisTest/makefile index 817727ea3..70adf0f15 100644 --- a/BuildTests/StaticAnalysisTest/makefile +++ b/BuildTests/StaticAnalysisTest/makefile @@ -24,7 +24,8 @@ SUPPRESS_WARNINGS = variableScope \ missingInclude # Extra paths to search for include files -INCLUDE_PATHS = $(LUFA_ROOT_PATH)/LUFA/CodeTemplates/ +INCLUDE_PATHS = $(LUFA_ROOT_PATH)/LUFA/CodeTemplates/ \ + $(LUFA_ROOT_PATH)/Projects/AVRISP-MKII/ # Configuration options to pass to cppcheck CPPCHECK_OPTIONS = --template=$(MESSAGE_TEMPLATE) $(INCLUDE_PATHS:%=-I%) $(EXCLUDE_LIST:%=-i%) --inline-suppr --force --error-exitcode=1 --std=c99 diff --git a/BuildTests/makefile b/BuildTests/makefile index e29643613..ac0cde260 100644 --- a/BuildTests/makefile +++ b/BuildTests/makefile @@ -11,11 +11,8 @@ # not intended to be modified or compiled by non-developers. all: - $(MAKE) -C ModuleTest all - $(MAKE) -C SingleUSBModeTest all - $(MAKE) -C StaticAnalysisTest all - %: + $(MAKE) -C BoardDriverTest $@ $(MAKE) -C ModuleTest $@ $(MAKE) -C SingleUSBModeTest $@ $(MAKE) -C StaticAnalysisTest $@ diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index 382446a80..867a09eef 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -46,9 +46,12 @@ USB_ClassInfo_Audio_Device_t Microphone_Audio_Interface = { .ControlInterfaceNumber = 0, .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = AUDIO_STREAM_EPNUM, - .DataINEndpointSize = AUDIO_STREAM_EPSIZE, + .DataINEndpoint = + { + .Address = AUDIO_STREAM_EPADDR, + .Size = AUDIO_STREAM_EPSIZE, + .Banks = 2, + }, }, }; @@ -197,7 +200,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* uint8_t* Data) { /* Check the requested endpoint to see if a supported endpoint is being manipulated */ - if (EndpointAddress == (ENDPOINT_DIR_IN | Microphone_Audio_Interface.Config.DataINEndpointNumber)) + if (EndpointAddress == Microphone_Audio_Interface.Config.DataINEndpoint.Address) { /* Check the requested control to see if a supported control is being manipulated */ if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq) diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/Demos/Device/ClassDriver/AudioInput/Descriptors.c index 6b7593f52..8557e18e5 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/Demos/Device/ClassDriver/AudioInput/Descriptors.h index ac0a536de..359a28730 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.h @@ -42,14 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index 78d81f57a..82f664a9b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -46,9 +46,12 @@ USB_ClassInfo_Audio_Device_t Speaker_Audio_Interface = { .ControlInterfaceNumber = 0, .StreamingInterfaceNumber = 1, - - .DataOUTEndpointNumber = AUDIO_STREAM_EPNUM, - .DataOUTEndpointSize = AUDIO_STREAM_EPSIZE, + .DataOUTEndpoint = + { + .Address = AUDIO_STREAM_EPADDR, + .Size = AUDIO_STREAM_EPSIZE, + .Banks = 2, + }, }, }; @@ -234,7 +237,7 @@ bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* uint8_t* Data) { /* Check the requested endpoint to see if a supported endpoint is being manipulated */ - if (EndpointAddress == (ENDPOINT_DIR_OUT | Speaker_Audio_Interface.Config.DataOUTEndpointNumber)) + if (EndpointAddress == Speaker_Audio_Interface.Config.DataOUTEndpoint.Address) { /* Check the requested control to see if a supported control is being manipulated */ if (EndpointControl == AUDIO_EPCONTROL_SamplingFreq) diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c index 06cc5caf5..0df27453e 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index ac0a536de..d5c8a2b84 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -42,14 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c index 5df6808c6..1a4860ad3 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_NOTIFICATION_EPNUM), + .EndpointAddress = CDC1_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,20 +183,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC1_RX_EPNUM), + .EndpointAddress = CDC1_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC1_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_TX_EPNUM), + .EndpointAddress = CDC1_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC2_IAD = @@ -258,7 +258,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_NOTIFICATION_EPNUM), + .EndpointAddress = CDC2_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -284,20 +284,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC2_RX_EPNUM), + .EndpointAddress = CDC2_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC2_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_TX_EPNUM), + .EndpointAddress = CDC2_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h index 01d10f29b..dc3aa0b86 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h @@ -42,23 +42,23 @@ #include /* Macros: */ - /** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */ - #define CDC1_TX_EPNUM 1 + /** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */ + #define CDC1_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */ - #define CDC1_RX_EPNUM 2 + /** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */ + #define CDC1_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */ - #define CDC1_NOTIFICATION_EPNUM 3 + /** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */ + #define CDC1_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */ - #define CDC2_TX_EPNUM 4 + /** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */ + #define CDC2_TX_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */ - #define CDC2_RX_EPNUM 5 + /** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */ + #define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5) - /** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */ - #define CDC2_NOTIFICATION_EPNUM 6 + /** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */ + #define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6) /** Size in bytes of the CDC device-to-host notification IN endpoints. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c index 8f1eb96cf..a07967c05 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c @@ -45,19 +45,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial1_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC1_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC1_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC1_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC1_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC1_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC1_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -70,19 +76,26 @@ USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 2, - - .DataINEndpointNumber = CDC2_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC2_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .ControlInterfaceNumber = 2, + .DataINEndpoint = + { + .Address = CDC2_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC2_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC2_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, - .NotificationEndpointNumber = CDC2_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, }, }; diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/Demos/Device/ClassDriver/GenericHID/Descriptors.c index ee1ba49c8..a9ca6be1c 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.c +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.c @@ -135,10 +135,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/Demos/Device/ClassDriver/GenericHID/Descriptors.h index ddeef240c..0b9ec8f71 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.h +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c index 36eb8f7fe..aa365bde2 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = GENERIC_IN_EPNUM, - .ReportINEndpointSize = GENERIC_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = GENERIC_IN_EPADDR, + .Size = GENERIC_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.c b/Demos/Device/ClassDriver/Joystick/Descriptors.c index da6fc3d09..903e35c63 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.c +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.c @@ -135,10 +135,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_EPNUM), + .EndpointAddress = JOYSTICK_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.h b/Demos/Device/ClassDriver/Joystick/Descriptors.h index f0ad9c2f1..d2e294316 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.h +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Joystick HID reporting IN endpoint. */ - #define JOYSTICK_EPNUM 1 + /** Endpoint address of the Joystick HID reporting IN endpoint. */ + #define JOYSTICK_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Joystick HID reporting IN endpoint. */ #define JOYSTICK_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.c b/Demos/Device/ClassDriver/Joystick/Joystick.c index 3c1913f8f..4f361daf0 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.c +++ b/Demos/Device/ClassDriver/Joystick/Joystick.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = JOYSTICK_EPNUM, - .ReportINEndpointSize = JOYSTICK_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = JOYSTICK_EPADDR, + .Size = JOYSTICK_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevJoystickHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevJoystickHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/Demos/Device/ClassDriver/Keyboard/Descriptors.c index cb7852667..c74368bb0 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.c @@ -131,10 +131,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/Demos/Device/ClassDriver/Keyboard/Descriptors.h index 370489514..f032b728e 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c index 15a7f1760..24bf8d5fa 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c index d6471d6e7..448fe0537 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c @@ -147,10 +147,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID2_MouseInterface = @@ -184,10 +184,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), + .EndpointAddress = MOUSE_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h index fe41f923e..e35e266c0 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h @@ -62,11 +62,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_IN_EPNUM 3 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_IN_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of each of the HID reporting IN endpoints. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c index cb2eebf81..7b5caa405 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c @@ -52,11 +52,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, @@ -72,10 +73,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = MOUSE_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - + .ReportINEndpoint = + { + .Address = MOUSE_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c index f08cdc717..f80678f19 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.c @@ -194,10 +194,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | HID_IN_EPNUM), + .EndpointAddress = HID_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h index f579edfb8..5632aa849 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the HID reporting IN endpoint. */ - #define HID_IN_EPNUM 1 + /** Endpoint address of the HID reporting IN endpoint. */ + #define HID_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of each of the HID reporting IN endpoint. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c index 7197959bb..c0526abfd 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Device_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = HID_IN_EPNUM, - .ReportINEndpointSize = HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = HID_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.c b/Demos/Device/ClassDriver/MIDI/Descriptors.c index 9ad0e86a5..44db1eee5 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.c +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.c @@ -199,10 +199,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, @@ -224,10 +224,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.h b/Demos/Device/ClassDriver/MIDI/Descriptors.h index c5dc2e217..83844449d 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.h +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.h @@ -42,11 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 2 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 1 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 1) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c index 317c37db0..6a117ab4b 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.c +++ b/Demos/Device/ClassDriver/MIDI/MIDI.c @@ -45,14 +45,18 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface = .Config = { .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = MIDI_STREAM_IN_EPNUM, - .DataINEndpointSize = MIDI_STREAM_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MIDI_STREAM_OUT_EPNUM, - .DataOUTEndpointSize = MIDI_STREAM_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = MIDI_STREAM_IN_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MIDI_STREAM_OUT_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, }, }; @@ -74,7 +78,7 @@ int main(void) MIDI_EventPacket_t ReceivedMIDIEvent; while (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent)) { - if ((ReceivedMIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && (ReceivedMIDIEvent.Data3 > 0)) + if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (ReceivedMIDIEvent.Data3 > 0)) LEDs_SetAllLEDs(ReceivedMIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2); else LEDs_SetAllLEDs(LEDS_NO_LEDS); @@ -151,8 +155,7 @@ void CheckJoystickMovement(void) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { - .CableNumber = 0, - .Command = (MIDICommand >> 4), + .Event = MIDI_EVENT(0, MIDICommand), .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/Demos/Device/ClassDriver/MassStorage/Descriptors.c index fb829423a..5c62f7fb1 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.c @@ -118,20 +118,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/Demos/Device/ClassDriver/MassStorage/Descriptors.h index 813f99520..84879e822 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.h @@ -42,11 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/Demos/Device/ClassDriver/MassStorage/MassStorage.c index 6a720f983..0ba06a5d0 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.c +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.c @@ -45,15 +45,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c index 27909034c..6818a7acb 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c @@ -133,20 +133,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID_KeyboardInterface = @@ -180,10 +180,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h index 86f6cc4c4..fb1a3794f 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h @@ -43,17 +43,17 @@ #include /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPSIZE 8 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c index bfdf09ceb..7e12a5d6e 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c @@ -46,15 +46,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; @@ -71,11 +74,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.c b/Demos/Device/ClassDriver/Mouse/Descriptors.c index 1a7af876c..174d23857 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.c +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.c @@ -136,10 +136,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.h b/Demos/Device/ClassDriver/Mouse/Descriptors.h index da78dd0ff..abcd938a8 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.h +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.h @@ -41,6 +41,13 @@ #include + /* Macros: */ + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Size in bytes of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPSIZE 8 + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -56,13 +63,6 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 - - /** Size in bytes of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPSIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.c b/Demos/Device/ClassDriver/Mouse/Mouse.c index 04d4268f0..00cadb41c 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.c +++ b/Demos/Device/ClassDriver/Mouse/Mouse.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c index 41bc4b59e..d1ca1df04 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,20 +157,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h index 7c40d87a1..6301b83aa 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 3 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c index 2a8ba9735..37fb817de 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c @@ -45,19 +45,24 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, .AdapterVendorDescription = "LUFA RNDIS Demo Adapter", .AdapterMACAddress = {ADAPTER_MAC_ADDRESS}, }, diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c index f4e9fb324..9dcf4e4d4 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,20 +169,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h index fb69344cb..af9183ed2 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c index c3e16edb0..8b11c298c 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c @@ -44,19 +44,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c index 299ddbdca..cfccac02b 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,20 +183,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_Interface = @@ -219,20 +219,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h index b4b5ef67a..544a2b5c0 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 1 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 2 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 3 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 3) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,11 +57,11 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 4 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 5 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 5) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c index d8ffea873..14d6abdd9 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.c @@ -45,18 +45,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -69,15 +75,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 2, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = TOTAL_LUNS, }, }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c index af674563f..999712185 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c @@ -176,7 +176,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -202,20 +202,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID_Interface = @@ -249,10 +249,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h index 2509314b2..06cfd459b 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,8 +57,8 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c index f2d67542d..dbbc8e7b4 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c @@ -45,18 +45,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -72,11 +78,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .Config = { .InterfaceNumber = 2, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.c b/Demos/Device/Incomplete/Sideshow/Descriptors.c index 533c92121..cc1a094c8 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.c +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.c @@ -89,7 +89,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, - EndpointAddress: (ENDPOINT_DIR_IN | SIDESHOW_IN_EPNUM), + EndpointAddress: SIDESHOW_IN_EPADDR, Attributes: EP_TYPE_BULK, EndpointSize: SIDESHOW_IO_EPSIZE, PollingIntervalMS: 0x00 @@ -99,7 +99,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { Header: {Size: sizeof(USB_Descriptor_Endpoint_t), Type: DTYPE_Endpoint}, - EndpointAddress: (ENDPOINT_DIR_OUT | SIDESHOW_OUT_EPNUM), + EndpointAddress: SIDESHOW_OUT_EPADDR, Attributes: EP_TYPE_BULK, EndpointSize: SIDESHOW_IO_EPSIZE, PollingIntervalMS: 0x00 diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.h b/Demos/Device/Incomplete/Sideshow/Descriptors.h index 6c9c6e3d7..1725a7951 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.h +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.h @@ -39,8 +39,8 @@ #include "Sideshow.h" /* Macros: */ - #define SIDESHOW_IN_EPNUM 3 - #define SIDESHOW_OUT_EPNUM 4 + #define SIDESHOW_IN_EPADDR 3 + #define SIDESHOW_OUT_EPADDR 4 #define SIDESHOW_IO_EPSIZE 64 /* Type Defines: */ diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c index 4634036e7..3e2392467 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c @@ -47,7 +47,7 @@ void Sideshow_ProcessCommandPacket(void) { SideShow_PacketHeader_t PacketHeader; - Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_OUT_EPADDR); Endpoint_Read_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); PacketHeader.Type.TypeFields.Response = true; @@ -110,7 +110,7 @@ void Sideshow_ProcessCommandPacket(void) PacketHeader.Length = sizeof(SideShow_PacketHeader_t); PacketHeader.Type.TypeFields.NAK = true; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); @@ -122,7 +122,7 @@ static void SideShow_Ping(SideShow_PacketHeader_t* const PacketHeader) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -137,7 +137,7 @@ static void SideShow_Sync(SideShow_PacketHeader_t* const PacketHeader) if (!(GUID_COMPARE(&ProtocolGUID, (uint32_t[])STANDARD_PROTOCOL_GUID))) PacketHeader->Type.TypeFields.NAK = true; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_Stream_LE(&ProtocolGUID, sizeof(GUID_t), NULL); Endpoint_ClearIN(); @@ -149,7 +149,7 @@ static void SideShow_GetCurrentUser(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + UserSID.LengthInBytes; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); SideShow_Write_Unicode_String(&UserSID); Endpoint_ClearIN(); @@ -162,7 +162,7 @@ static void SideShow_SetCurrentUser(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -254,7 +254,7 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader Property.PropertyGUID.Chunks[2], Property.PropertyGUID.Chunks[3]); } - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); if (!(PacketHeader->Type.TypeFields.NAK)) @@ -288,7 +288,7 @@ static void SideShow_GetString(SideShow_PacketHeader_t* const PacketHeader, PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + ((Unicode_String_t*)UnicodeStruct)->LengthInBytes; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); SideShow_Write_Unicode_String(UnicodeStruct); Endpoint_ClearIN(); @@ -309,7 +309,7 @@ static void SideShow_GetApplicationOrder(SideShow_PacketHeader_t* const PacketHe PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + (TotalApplications * sizeof(GUID_t)); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_32_LE(TotalApplications); @@ -330,7 +330,7 @@ static void SideShow_GetSupportedEndpoints(SideShow_PacketHeader_t* const Packet PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + sizeof(GUID_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_Write_32_LE(1); Endpoint_Write_Stream_LE(&SupportedEndpointGUID, sizeof(GUID_t), NULL); @@ -377,7 +377,7 @@ static void SideShow_AddApplication(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -398,7 +398,7 @@ static void SideShow_DeleteApplication(SideShow_PacketHeader_t* const PacketHead PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -410,7 +410,7 @@ static void SideShow_DeleteAllApplications(SideShow_PacketHeader_t* const Packet for (uint8_t App = 0; App < MAX_APPLICATIONS; App++) InstalledApplications[App].InUse = false; - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -440,7 +440,7 @@ static void SideShow_AddContent(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -465,7 +465,7 @@ static void SideShow_DeleteContent(SideShow_PacketHeader_t* const PacketHeader) PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } @@ -488,7 +488,7 @@ static void SideShow_DeleteAllContent(SideShow_PacketHeader_t* const PacketHeade PacketHeader->Length = sizeof(SideShow_PacketHeader_t); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPADDR); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t), NULL); Endpoint_ClearIN(); } diff --git a/Demos/Device/Incomplete/Sideshow/Sideshow.c b/Demos/Device/Incomplete/Sideshow/Sideshow.c index 3bc58d376..41009f373 100644 --- a/Demos/Device/Incomplete/Sideshow/Sideshow.c +++ b/Demos/Device/Incomplete/Sideshow/Sideshow.c @@ -101,10 +101,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Sideshow Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - SIDESHOW_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - SIDESHOW_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_IN_EPADDR, EP_TYPE_BULK, SIDESHOW_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(SIDESHOW_OUT_EPADDR, EP_TYPE_BULK, SIDESHOW_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -142,7 +140,7 @@ void SideShow_Task(void) return; /* Select the SideShow data out endpoint */ - Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); + Endpoint_SelectEndpoint(SIDESHOW_OUT_EPADDR); /* Check to see if a new SideShow message has been received */ if (Endpoint_IsReadWriteAllowed()) diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c index 14be2ec49..bf16ab08a 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -119,27 +119,27 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | TMC_OUT_EPNUM), + .EndpointAddress = TMC_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .TM_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | TMC_IN_EPNUM), + .EndpointAddress = TMC_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .TM_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | TMC_NOTIFICATION_EPNUM), + .EndpointAddress = TMC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h index 8876f732b..e45654a27 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h @@ -43,20 +43,20 @@ #include /* Macros: */ - /** Endpoint number of the TMC notification IN endpoint. */ - #define TMC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the TMC notification IN endpoint. */ + #define TMC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the TMC device-to-host data IN endpoint. */ - #define TMC_IN_EPNUM 3 + /** Endpoint address of the TMC device-to-host data IN endpoint. */ + #define TMC_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the TMC host-to-device data OUT endpoint. */ - #define TMC_OUT_EPNUM 4 + /** Endpoint address of the TMC host-to-device data OUT endpoint. */ + #define TMC_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the TMC data endpoints. */ - #define TMC_IO_EPSIZE 64 + #define TMC_IO_EPSIZE 64 /** Size in bytes of the TMC notification endpoint. */ - #define TMC_NOTIFICATION_EPSIZE 8 + #define TMC_NOTIFICATION_EPSIZE 8 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index c77b01e1a..5102f101c 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -129,12 +129,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup TMC In, Out and Notification Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -418,7 +415,7 @@ bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader) uint8_t ErrorCode; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(TMC_OUT_EPNUM); + Endpoint_SelectEndpoint(TMC_OUT_EPADDR); /* Abort if no command has been sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -450,7 +447,7 @@ bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader) MessageHeader->InverseTag = ~CurrentTransferTag; /* Select the Data In endpoint */ - Endpoint_SelectEndpoint(TMC_IN_EPNUM); + Endpoint_SelectEndpoint(TMC_IN_EPADDR); /* Send the command header to the host */ BytesTransferred = 0; diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.c b/Demos/Device/LowLevel/AudioInput/AudioInput.c index 60eeaf64c..eb9c4b57c 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.c +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.c @@ -118,8 +118,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Audio Stream Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS, ENDPOINT_DIR_IN, - AUDIO_STREAM_EPSIZE, ENDPOINT_BANK_DOUBLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -165,7 +164,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -190,7 +189,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -215,7 +214,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); /* Select the audio stream endpoint */ - Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); + Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR); /* Check if the current endpoint can be written to and that the audio interface is enabled */ if (Endpoint_IsINReady() && StreamingAudioInterfaceSelected) diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.c b/Demos/Device/LowLevel/AudioInput/Descriptors.c index 0b1652246..ee37affd2 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.h b/Demos/Device/LowLevel/AudioInput/Descriptors.h index ac0a536de..4680294c9 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.h @@ -42,14 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c index 813108a71..ebf4ad51d 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c @@ -144,8 +144,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Audio Stream Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPNUM, EP_TYPE_ISOCHRONOUS, ENDPOINT_DIR_OUT, - AUDIO_STREAM_EPSIZE, ENDPOINT_BANK_DOUBLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AUDIO_STREAM_EPADDR, EP_TYPE_ISOCHRONOUS, AUDIO_STREAM_EPSIZE, 2); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -191,7 +190,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle SET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -216,7 +215,7 @@ void EVENT_USB_Device_ControlRequest(void) uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8); /* Only handle GET CURRENT requests to the audio endpoint's sample frequency property */ - if ((EndpointAddress == (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM)) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) + if ((EndpointAddress == AUDIO_STREAM_EPADDR) && (EndpointControl == AUDIO_EPCONTROL_SamplingFreq)) { uint8_t SampleRate[3]; @@ -241,7 +240,7 @@ ISR(TIMER0_COMPA_vect, ISR_BLOCK) uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint(); /* Select the audio stream endpoint */ - Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); + Endpoint_SelectEndpoint(AUDIO_STREAM_EPADDR); /* Check if the current endpoint can be read from (contains a packet) and the host is sending data */ if (Endpoint_IsOUTReceived() && StreamingAudioInterfaceSelected) diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/Demos/Device/LowLevel/AudioOutput/Descriptors.c index 7f12fc72c..12a5a1562 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.c @@ -220,7 +220,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AUDIO_STREAM_EPNUM), + .EndpointAddress = AUDIO_STREAM_EPADDR, .Attributes = (EP_TYPE_ISOCHRONOUS | ENDPOINT_ATTR_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 0x01 diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/Demos/Device/LowLevel/AudioOutput/Descriptors.h index ac0a536de..e0c756744 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.h @@ -42,14 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Audio isochronous streaming data endpoint. */ - #define AUDIO_STREAM_EPNUM 1 + /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ + #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) - /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires - * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller - * USB AVR models will result in unavoidable distorted output. - */ - #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. */ + #define AUDIO_STREAM_EPSIZE 256 /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c index 5df6808c6..1a4860ad3 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_NOTIFICATION_EPNUM), + .EndpointAddress = CDC1_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,20 +183,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC1_RX_EPNUM), + .EndpointAddress = CDC1_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC1_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC1_TX_EPNUM), + .EndpointAddress = CDC1_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC2_IAD = @@ -258,7 +258,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_NOTIFICATION_EPNUM), + .EndpointAddress = CDC2_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -284,20 +284,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC2_RX_EPNUM), + .EndpointAddress = CDC2_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC2_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC2_TX_EPNUM), + .EndpointAddress = CDC2_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h index 0a172d83d..fee2c8552 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h @@ -42,23 +42,23 @@ #include /* Macros: */ - /** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */ - #define CDC1_TX_EPNUM 1 + /** Endpoint address of the first CDC interface's device-to-host data IN endpoint. */ + #define CDC1_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */ - #define CDC1_RX_EPNUM 2 + /** Endpoint address of the first CDC interface's host-to-device data OUT endpoint. */ + #define CDC1_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */ - #define CDC1_NOTIFICATION_EPNUM 3 + /** Endpoint address of the first CDC interface's device-to-host notification IN endpoint. */ + #define CDC1_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */ - #define CDC2_TX_EPNUM 4 + /** Endpoint address of the second CDC interface's device-to-host data IN endpoint. */ + #define CDC2_TX_EPADDR (ENDPOINT_DIR_IN | 4) - /** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */ - #define CDC2_RX_EPNUM 5 + /** Endpoint address of the second CDC interface's host-to-device data OUT endpoint. */ + #define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5) - /** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */ - #define CDC2_NOTIFICATION_EPNUM 6 + /** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */ + #define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6) /** Size in bytes of the CDC device-to-host notification IN endpoints. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c index 9208b2c44..2db6f4e23 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c @@ -123,20 +123,14 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup first CDC Interface's Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC1_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Setup second CDC Interface's Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC2_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Reset line encoding baud rates so that the host knows to send new values */ LineEncoding1.BaudRateBPS = 0; @@ -224,7 +218,7 @@ void CDC1_Task(void) ActionSent = true; /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC1_TX_EPNUM); + Endpoint_SelectEndpoint(CDC1_TX_EPADDR); /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL); @@ -240,7 +234,7 @@ void CDC1_Task(void) } /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC1_RX_EPNUM); + Endpoint_SelectEndpoint(CDC1_RX_EPADDR); /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) @@ -257,7 +251,7 @@ void CDC2_Task(void) return; /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC2_RX_EPNUM); + Endpoint_SelectEndpoint(CDC2_RX_EPADDR); /* Check to see if any data has been received */ if (Endpoint_IsOUTReceived()) @@ -275,7 +269,7 @@ void CDC2_Task(void) Endpoint_ClearOUT(); /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC2_TX_EPNUM); + Endpoint_SelectEndpoint(CDC2_TX_EPADDR); /* Write the received data to the endpoint */ Endpoint_Write_Stream_LE(&Buffer, DataLength, NULL); diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.c b/Demos/Device/LowLevel/GenericHID/Descriptors.c index 2dcdcf030..3a6f13526 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.c +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.c @@ -143,20 +143,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | GENERIC_OUT_EPNUM), + .EndpointAddress = GENERIC_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.h b/Demos/Device/LowLevel/GenericHID/Descriptors.h index 4647a05f0..e47220a1c 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.h +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.h @@ -58,11 +58,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Generic HID reporting OUT endpoint. */ - #define GENERIC_OUT_EPNUM 2 + /** Endpoint address of the Generic HID reporting OUT endpoint. */ + #define GENERIC_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c index 4d61acfb6..c36c33f7e 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.c +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c @@ -95,10 +95,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - GENERIC_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - GENERIC_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_IN_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(GENERIC_OUT_EPADDR, EP_TYPE_INTERRUPT, GENERIC_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -200,7 +198,7 @@ void HID_Task(void) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM); + Endpoint_SelectEndpoint(GENERIC_OUT_EPADDR); /* Check to see if a packet has been sent from the host */ if (Endpoint_IsOUTReceived()) @@ -222,7 +220,7 @@ void HID_Task(void) Endpoint_ClearOUT(); } - Endpoint_SelectEndpoint(GENERIC_IN_EPNUM); + Endpoint_SelectEndpoint(GENERIC_IN_EPADDR); /* Check to see if the host is ready to accept another packet */ if (Endpoint_IsINReady()) diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.c b/Demos/Device/LowLevel/Joystick/Descriptors.c index 272595d99..bcadacda5 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.c +++ b/Demos/Device/LowLevel/Joystick/Descriptors.c @@ -155,10 +155,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | JOYSTICK_EPNUM), + .EndpointAddress = JOYSTICK_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.h b/Demos/Device/LowLevel/Joystick/Descriptors.h index 93b315b4e..bc90fb7cc 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.h +++ b/Demos/Device/LowLevel/Joystick/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Joystick HID reporting IN endpoint. */ - #define JOYSTICK_EPNUM 1 + /** Endpoint address of the Joystick HID reporting IN endpoint. */ + #define JOYSTICK_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Joystick HID reporting IN endpoint. */ #define JOYSTICK_EPSIZE 8 diff --git a/Demos/Device/LowLevel/Joystick/Joystick.c b/Demos/Device/LowLevel/Joystick/Joystick.c index 9e84b61f9..cfdfaae2f 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.c +++ b/Demos/Device/LowLevel/Joystick/Joystick.c @@ -96,8 +96,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - JOYSTICK_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(JOYSTICK_EPADDR, EP_TYPE_INTERRUPT, JOYSTICK_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -183,7 +182,7 @@ void HID_Task(void) return; /* Select the Joystick Report Endpoint */ - Endpoint_SelectEndpoint(JOYSTICK_EPNUM); + Endpoint_SelectEndpoint(JOYSTICK_EPADDR); /* Check to see if the host is ready for another packet */ if (Endpoint_IsINReady()) diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.c b/Demos/Device/LowLevel/Keyboard/Descriptors.c index 46b9fdec5..f4e294239 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.c +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.c @@ -160,20 +160,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | KEYBOARD_OUT_EPNUM), + .EndpointAddress = KEYBOARD_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.h b/Demos/Device/LowLevel/Keyboard/Descriptors.h index 3c0ea1797..2e1fe3c81 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.h +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.h @@ -59,11 +59,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Keyboard HID reporting OUT endpoint. */ - #define KEYBOARD_OUT_EPNUM 2 + /** Endpoint address of the Keyboard HID reporting OUT endpoint. */ + #define KEYBOARD_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c index 45bf010fc..3755d09de 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.c +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c @@ -117,10 +117,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, KEYBOARD_EPSIZE, 1); /* Turn on Start-of-Frame events for tracking HID report period expiry */ USB_Device_EnableSOFEvents(); @@ -315,7 +313,7 @@ void SendNextReport(void) } /* Select the Keyboard Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR); /* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */ if (Endpoint_IsReadWriteAllowed() && SendReport) @@ -335,7 +333,7 @@ void SendNextReport(void) void ReceiveNextReport(void) { /* Select the Keyboard LED Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR); /* Check if Keyboard LED Endpoint contains a packet */ if (Endpoint_IsOUTReceived()) diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c index 9d02fa45c..a058373fa 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c @@ -195,20 +195,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), + .EndpointAddress = KEYBOARD_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID1_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | KEYBOARD_OUT_EPNUM), + .EndpointAddress = KEYBOARD_OUT_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID2_MouseInterface = @@ -242,10 +242,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), + .EndpointAddress = MOUSE_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h index 573cb65b6..178f5ed99 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h @@ -65,14 +65,14 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Keyboard HID reporting IN endpoint. */ - #define KEYBOARD_IN_EPNUM 1 + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the Keyboard HID reporting OUT endpoint. */ - #define KEYBOARD_OUT_EPNUM 2 + /** Endpoint address of the Keyboard HID reporting OUT endpoint. */ + #define KEYBOARD_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_IN_EPNUM 3 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_IN_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of each of the HID reporting IN and OUT endpoints. */ #define HID_EPSIZE 8 diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index 4de6f64c9..a916659ea 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -104,14 +104,11 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Keyboard HID Report Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(KEYBOARD_OUT_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); /* Setup Mouse HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - HID_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_IN_EPADDR, EP_TYPE_INTERRUPT, HID_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -236,7 +233,7 @@ void Keyboard_HID_Task(void) } /* Select the Keyboard Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_IN_EPADDR); /* Check if Keyboard Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) @@ -252,7 +249,7 @@ void Keyboard_HID_Task(void) } /* Select the Keyboard LED Report Endpoint */ - Endpoint_SelectEndpoint(KEYBOARD_OUT_EPNUM); + Endpoint_SelectEndpoint(KEYBOARD_OUT_EPADDR); /* Check if Keyboard LED Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) @@ -294,7 +291,7 @@ void Mouse_HID_Task(void) } /* Select the Mouse Report Endpoint */ - Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); + Endpoint_SelectEndpoint(MOUSE_IN_EPADDR); /* Check if Mouse Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.c b/Demos/Device/LowLevel/MIDI/Descriptors.c index 9ad0e86a5..44db1eee5 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.c +++ b/Demos/Device/LowLevel/MIDI/Descriptors.c @@ -199,10 +199,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, @@ -224,10 +224,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.h b/Demos/Device/LowLevel/MIDI/Descriptors.h index 5415a31cd..7947a463c 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.h +++ b/Demos/Device/LowLevel/MIDI/Descriptors.h @@ -42,11 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 1 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 2 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Demos/Device/LowLevel/MIDI/MIDI.c b/Demos/Device/LowLevel/MIDI/MIDI.c index a29a8c86b..335c7143e 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.c +++ b/Demos/Device/LowLevel/MIDI/MIDI.c @@ -94,10 +94,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup MIDI Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_IN_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MIDI_STREAM_OUT_EPADDR, EP_TYPE_BULK, MIDI_STREAM_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -114,7 +112,7 @@ void MIDI_Task(void) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPNUM); + Endpoint_SelectEndpoint(MIDI_STREAM_IN_EPADDR); if (Endpoint_IsINReady()) { @@ -162,8 +160,7 @@ void MIDI_Task(void) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { - .CableNumber = 0, - .Command = (MIDICommand >> 4), + .Event = MIDI_EVENT(0, MIDICommand), .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, @@ -182,7 +179,7 @@ void MIDI_Task(void) } /* Select the MIDI OUT stream */ - Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPNUM); + Endpoint_SelectEndpoint(MIDI_STREAM_OUT_EPADDR); /* Check if a MIDI command has been received */ if (Endpoint_IsOUTReceived()) @@ -193,7 +190,7 @@ void MIDI_Task(void) Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent), NULL); /* Check to see if the sent command is a note on message with a non-zero velocity */ - if ((MIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && (MIDIEvent.Data3 > 0)) + if ((MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && (MIDIEvent.Data3 > 0)) { /* Change LEDs depending on the pitch of the sent note */ LEDs_SetAllLEDs(MIDIEvent.Data2 > 64 ? LEDS_LED1 : LEDS_LED2); diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.c b/Demos/Device/LowLevel/MassStorage/Descriptors.c index fb829423a..5c62f7fb1 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.c +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.c @@ -118,20 +118,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h index 0e7a91ffd..34a85f6d1 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.h +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h @@ -42,11 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c index 947636cf8..0e8e1083b 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.c +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c @@ -118,10 +118,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup Mass Storage Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_IN_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MASS_STORAGE_OUT_EPADDR, EP_TYPE_BULK, MASS_STORAGE_IO_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -180,7 +178,7 @@ void MassStorage_Task(void) /* Check direction of command, select Data IN endpoint if data is from the device */ if (CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN) - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); /* Decode the received SCSI command, set returned status code */ CommandStatus.Status = SCSI_DecodeSCSICommand() ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail; @@ -206,13 +204,13 @@ void MassStorage_Task(void) if (IsMassStoreReset) { /* Reset the data endpoint banks */ - Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPNUM); - Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_ResetEndpoint(MASS_STORAGE_OUT_EPADDR); + Endpoint_ResetEndpoint(MASS_STORAGE_IN_EPADDR); - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); @@ -231,7 +229,7 @@ static bool ReadInCommandBlock(void) uint16_t BytesTransferred; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); /* Abort if no command has been sent from the host */ if (!(Endpoint_IsOUTReceived())) @@ -256,7 +254,7 @@ static bool ReadInCommandBlock(void) { /* Stall both data pipes until reset by host */ Endpoint_StallTransaction(); - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); Endpoint_StallTransaction(); return false; @@ -286,7 +284,7 @@ static void ReturnCommandStatus(void) uint16_t BytesTransferred; /* Select the Data Out endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPADDR); /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ while (Endpoint_IsStalled()) @@ -297,7 +295,7 @@ static void ReturnCommandStatus(void) } /* Select the Data In endpoint */ - Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); + Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPADDR); /* While data pipe is stalled, wait until the host issues a control request to clear the stall */ while (Endpoint_IsStalled()) diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.c b/Demos/Device/LowLevel/Mouse/Descriptors.c index d42fb835c..03ea0e71f 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.c +++ b/Demos/Device/LowLevel/Mouse/Descriptors.c @@ -155,10 +155,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.h b/Demos/Device/LowLevel/Mouse/Descriptors.h index da78dd0ff..abcd938a8 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.h +++ b/Demos/Device/LowLevel/Mouse/Descriptors.h @@ -41,6 +41,13 @@ #include + /* Macros: */ + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Size in bytes of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPSIZE 8 + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -56,13 +63,6 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 - - /** Size in bytes of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPSIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c index 98da9be92..e9f92e4a2 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.c +++ b/Demos/Device/LowLevel/Mouse/Mouse.c @@ -116,8 +116,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup HID Report Endpoint */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(MOUSE_EPADDR, EP_TYPE_INTERRUPT, MOUSE_EPSIZE, 1); /* Turn on Start-of-Frame events for tracking HID report period expiry */ USB_Device_EnableSOFEvents(); @@ -271,7 +270,7 @@ void SendNextReport(void) } /* Select the Mouse Report Endpoint */ - Endpoint_SelectEndpoint(MOUSE_EPNUM); + Endpoint_SelectEndpoint(MOUSE_EPADDR); /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */ if (Endpoint_IsReadWriteAllowed() && SendReport) diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c index 41bc4b59e..d1ca1df04 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,20 +157,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h index 9ffa5262f..6337335ac 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 3 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 64 diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c index a36ecf4bb..c041bb91a 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c @@ -104,12 +104,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup RNDIS Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); /* Indicate endpoint configuration success or failure */ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); @@ -170,7 +167,7 @@ void EVENT_USB_Device_ControlRequest(void) void RNDIS_Task(void) { /* Select the notification endpoint */ - Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); + Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPADDR); /* Check if a message response is ready for the host */ if (Endpoint_IsINReady() && ResponseReady) @@ -201,7 +198,7 @@ void RNDIS_Task(void) RNDIS_Packet_Message_t RNDISPacketHeader; /* Select the data OUT endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Check if the data OUT endpoint contains data, and that the IN buffer is empty */ if (Endpoint_IsOUTReceived() && !(FrameIN.FrameLength)) @@ -227,7 +224,7 @@ void RNDIS_Task(void) } /* Select the data IN endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */ if (Endpoint_IsINReady() && FrameOUT.FrameLength) diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c index f4e9fb324..9dcf4e4d4 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,20 +169,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h index 765345bc3..36ec8f9ff 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c index 93fd4353e..7d185481d 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c @@ -109,12 +109,9 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup CDC Data Endpoints */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CDC_NOTIFICATION_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); - ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - CDC_TXRX_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, CDC_NOTIFICATION_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); + ConfigSuccess &= Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1); /* Reset line encoding baud rate so that the host knows to send new values */ LineEncoding.BaudRateBPS = 0; @@ -201,7 +198,7 @@ void CDC_Task(void) ActionSent = true; /* Select the Serial Tx Endpoint */ - Endpoint_SelectEndpoint(CDC_TX_EPNUM); + Endpoint_SelectEndpoint(CDC_TX_EPADDR); /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString), NULL); @@ -225,7 +222,7 @@ void CDC_Task(void) } /* Select the Serial Rx Endpoint */ - Endpoint_SelectEndpoint(CDC_RX_EPNUM); + Endpoint_SelectEndpoint(CDC_RX_EPADDR); /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c index 2ee35de87..71643be29 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c @@ -136,10 +136,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_EPNUM), + .EndpointAddress = MOUSE_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h index da78dd0ff..14cb8e9a3 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h @@ -57,8 +57,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Mouse HID reporting IN endpoint. */ - #define MOUSE_EPNUM 1 + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c index 16fc3fb2b..39a682a60 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MOUSE_EPNUM, - .ReportINEndpointSize = MOUSE_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MOUSE_EPADDR, + .Size = MOUSE_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c index a71e85b5a..29def30d5 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c @@ -44,9 +44,16 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataOUTPipeNumber = 2, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataINPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_MouseBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c index d0737acd7..4c53cc221 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_AOA_Host_t AndroidDevice_AOA_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .PropertyStrings = { [AOA_STRING_Manufacturer] = "Dean Camera", diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c index 3e4a69a05..aa274932f 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c +++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.c @@ -44,7 +44,10 @@ USB_ClassInfo_Audio_Host_t Microphone_Audio_Interface = { .Config = { - .DataINPipeNumber = 1, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + }, }, }; @@ -179,7 +182,7 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void) } USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000); - if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipeNumber, + if (Audio_Host_GetSetEndpointProperty(&Microphone_Audio_Interface, Microphone_Audio_Interface.Config.DataINPipe.Address, AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq, sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful) { diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c index 783b0a5e5..833be1b2c 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c @@ -44,7 +44,10 @@ USB_ClassInfo_Audio_Host_t Speaker_Audio_Interface = { .Config = { - .DataOUTPipeNumber = 1, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + }, }, }; @@ -187,7 +190,7 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void) } USB_Audio_SampleFreq_t SampleRate = AUDIO_SAMPLE_FREQ(48000); - if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipeNumber, + if (Audio_Host_GetSetEndpointProperty(&Speaker_Audio_Interface, Speaker_Audio_Interface.Config.DataOUTPipe.Address, AUDIO_REQ_SetCurrent, AUDIO_EPCONTROL_SamplingFreq, sizeof(SampleRate), &SampleRate) != HOST_SENDCONTROL_Successful) { diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c index 5d912497d..18c02d769 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Joystick_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c index f67cd1161..69499089b 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_KeyboardBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c index 4247e9e56..6ef182000 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c index 8293fbd3b..472d19aee 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_MIDI_Host_t Keyboard_MIDI_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; @@ -106,8 +111,8 @@ void JoystickHost_Task(void) MIDI_EventPacket_t MIDIEvent; while (MIDI_Host_ReceiveEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent)) { - bool NoteOnEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_ON >> 4)); - bool NoteOffEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_OFF >> 4)); + bool NoteOnEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)); + bool NoteOffEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF)); /* Display note events from the host */ if (NoteOnEvent || NoteOffEvent) @@ -168,8 +173,7 @@ void CheckJoystickMovement(void) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { - .CableNumber = 0, - .Command = (MIDICommand >> 4), + .Event = MIDI_EVENT(0, MIDICommand), .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c index 10c7f7921..aacc07879 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_MS_Host_t FlashDisk_MS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.c b/Demos/Host/ClassDriver/MouseHost/MouseHost.c index 4272591d5..1290e4855 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.c +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.c @@ -44,12 +44,16 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_MouseBootProtocol, }, }; diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c index 857d49412..8004b5ca1 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c index 3df0eedf2..51157a315 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c @@ -44,11 +44,16 @@ USB_ClassInfo_PRNT_Host_t Printer_PRNT_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c index f03ee4967..d27aab143 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c @@ -47,16 +47,22 @@ USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, - - .HostMaxPacketSize = sizeof(PacketBuffer), + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, + .HostMaxPacketSize = sizeof(PacketBuffer), }, }; diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c index eeac14d11..9a89452af 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c @@ -44,14 +44,21 @@ USB_ClassInfo_SI_Host_t DigitalCamera_SI_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .EventsPipeNumber = 3, - .EventsPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .EventsPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c index 631925e45..bce7804b4 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c @@ -44,14 +44,21 @@ USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, }, }; diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c index 7d1050601..fa19052a8 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c @@ -105,16 +105,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Bluetooth data IN pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Bluetooth data OUT pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the Bluetooth events pipe */ - Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h index 9c40fcdcb..c46add71a 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h @@ -40,9 +40,9 @@ #include /* Macros: */ - #define BLUETOOTH_DATA_IN_PIPE 1 - #define BLUETOOTH_DATA_OUT_PIPE 2 - #define BLUETOOTH_EVENTS_PIPE 3 + #define BLUETOOTH_DATA_IN_PIPE (PIPE_DIR_IN | 1) + #define BLUETOOTH_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) + #define BLUETOOTH_EVENTS_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c index 1b8613b69..6db853267 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.c @@ -95,12 +95,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Android Accessory data IN pipe */ - Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(ANDROID_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Android Accessory data OUT pipe */ - Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(ANDROID_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h index 05e1b91e1..53b7280b4 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/ConfigDescriptor.h @@ -40,8 +40,11 @@ #include /* Macros: */ - #define ANDROID_DATA_IN_PIPE 1 - #define ANDROID_DATA_OUT_PIPE 2 + /** Pipe address of the Android Accessory data IN pipe. */ + #define ANDROID_DATA_IN_PIPE (PIPE_DIR_IN | 1) + + /** Pipe address of the Android Accessory data OUT pipe. */ + #define ANDROID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c index b26dbb80e..9274e633d 100644 --- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.c @@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void) StreamingEndpointAddress = DataINEndpoint->EndpointAddress; /* Configure the Audio data IN pipe */ - Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_DOUBLE); + Pipe_ConfigurePipe(AUDIO_DATA_IN_PIPE, EP_TYPE_ISOCHRONOUS, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 2); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h index a5f425900..84d27c7e6 100644 --- a/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AudioInputHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "AudioInputHost.h" /* Macros: */ - /** Pipe number for the Audio data IN pipe. */ - #define AUDIO_DATA_IN_PIPE 1 + /** Pipe address for the Audio data IN pipe. */ + #define AUDIO_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index b98cf1f14..44513ef35 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Audio Input Host" +PROJECT_NAME = "LUFA Library - Audio Input Host Demo" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c index 99980fd3d..cc2506274 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.c @@ -130,8 +130,7 @@ uint8_t ProcessConfigurationDescriptor(void) StreamingEndpointAddress = DataOUTEndpoint->EndpointAddress; /* Configure the Audio data OUT pipe */ - Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_DOUBLE); + Pipe_ConfigurePipe(AUDIO_DATA_OUT_PIPE, EP_TYPE_ISOCHRONOUS, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 2); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h index dcf367e15..0c4f06766 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "AudioOutputHost.h" /* Macros: */ - /** Pipe number for the Audio data OUT pipe. */ - #define AUDIO_DATA_OUT_PIPE 1 + /** Pipe address for the Audio data OUT pipe. */ + #define AUDIO_DATA_OUT_PIPE (PIPE_DIR_OUT | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 55c9bb563..9cb0e55a2 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Audio Output Host" +PROJECT_NAME = "LUFA Library - Audio Output Host Demo" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c index 6df253cb5..9067450e2 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c @@ -109,16 +109,14 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Check if the HID interface contained an optional OUT data endpoint */ if (DataOUTEndpoint) { /* Configure the HID data OUT pipe */ - Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); } /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h index 4614893d5..547f1545b 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h @@ -42,11 +42,11 @@ #include "GenericHIDHost.h" /* Macros: */ - /** Pipe number for the HID data IN pipe. */ - #define HID_DATA_IN_PIPE 1 + /** Pipe address for the HID data IN pipe. */ + #define HID_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the HID data OUT pipe. */ - #define HID_DATA_OUT_PIPE 2 + /** Pipe address for the HID data OUT pipe. */ + #define HID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c index 4f7a0d61b..be6eb09cd 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h index 69fdfedf2..fba5713b2 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the joystick report data pipe. */ - #define JOYSTICK_DATA_IN_PIPE 1 + /** Pipe address for the joystick report data pipe. */ + #define JOYSTICK_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 4366e6edd..65c60866b 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Joystick Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Joystick Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c index cfcee7b8b..73dc5dfe5 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c @@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h index 5b44d3fd5..eb09f695f 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "KeyboardHost.h" /* Macros: */ - /** Pipe number for the keyboard data IN pipe. */ - #define KEYBOARD_DATA_IN_PIPE 1 + /** Pipe address for the keyboard data IN pipe. */ + #define KEYBOARD_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c index 765b325f0..ddd43590b 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h index ffa2afd8e..c40211cb0 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the keyboard report data pipe. */ - #define KEYBOARD_DATA_IN_PIPE 1 + /** Pipe address for the keyboard report data IN pipe. */ + #define KEYBOARD_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 9f76d7efd..3e481571d 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Keyboard Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Keyboard Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c index 39e513cf6..70381ea56 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c @@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the MIDI data IN pipe */ - Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the MIDI data OUT pipe */ - Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MIDI_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h index d41513e4e..40d4dc9cc 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h @@ -42,11 +42,11 @@ #include "MIDIHost.h" /* Macros: */ - /** Pipe number for the MIDI data IN pipe. */ - #define MIDI_DATA_IN_PIPE 1 + /** Pipe address for the MIDI data IN pipe. */ + #define MIDI_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the MIDI data OUT pipe. */ - #define MIDI_DATA_OUT_PIPE 2 + /** Pipe address for the MIDI data OUT pipe. */ + #define MIDI_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c index 060761f58..f4a52accd 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c @@ -177,8 +177,8 @@ void MIDIHost_Task(void) if (!(Pipe_BytesInPipe())) Pipe_ClearIN(); - bool NoteOnEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_ON >> 4)); - bool NoteOffEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_OFF >> 4)); + bool NoteOnEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)); + bool NoteOffEvent = (MIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF)); if (NoteOnEvent || NoteOffEvent) { @@ -237,8 +237,7 @@ void MIDIHost_Task(void) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { - .CableNumber = 0, - .Command = (MIDICommand >> 4), + .Event = MIDI_EVENT(0, MIDICommand), .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c index 566cdb10c..0e967f972 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c @@ -105,12 +105,10 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Mass Storage data IN pipe */ - Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Mass Storage data OUT pipe */ - Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MASS_STORE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h index a40debd98..eb0746b04 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h @@ -51,11 +51,11 @@ /** Interface Protocol value for the Bulk Only transport protocol. */ #define MASS_STORE_PROTOCOL 0x50 - /** Pipe number of the Mass Storage data IN pipe. */ - #define MASS_STORE_DATA_IN_PIPE 1 + /** Pipe address of the Mass Storage data IN pipe. */ + #define MASS_STORE_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Mass Storage data OUT pipe. */ - #define MASS_STORE_DATA_OUT_PIPE 2 + /** Pipe address of the Mass Storage data OUT pipe. */ + #define MASS_STORE_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c index c33e08769..4992e3a67 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c @@ -98,8 +98,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h index 9619c44ac..14051a6a9 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "MouseHost.h" /* Macros: */ - /** Pipe number for the mouse data IN pipe. */ - #define MOUSE_DATA_IN_PIPE 1 + /** Pipe address for the mouse data IN pipe. */ + #define MOUSE_DATA_IN_PIPE (PIPE_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c index c6647007c..7d63d2bdb 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c @@ -110,8 +110,7 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Get the HID report size from the HID report descriptor */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h index 799761bba..0a2582bfe 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h @@ -42,8 +42,8 @@ #include "HIDReport.h" /* Macros: */ - /** Pipe number for the mouse report data pipe. */ - #define MOUSE_DATA_IN_PIPE 1 + /** Pipe address for the mouse report data IN pipe. */ + #define MOUSE_DATA_IN_PIPE (ENDPOINT_DIR_IN | 1) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index fcf83567f..b41e8d85a 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - Mouse Host (Using HID Descriptor Parser)" +PROJECT_NAME = "LUFA Library - Mouse Host Demo (Using HID Descriptor Parser)" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c index f259c1fd8..922734f33 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c @@ -108,12 +108,10 @@ uint8_t ProcessConfigurationDescriptor(void) PrinterAltSetting = PrinterInterface->AlternateSetting; /* Configure the Printer data IN pipe */ - Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Printer data OUT pipe */ - Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(PRINTER_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Valid data found, return success */ return SuccessfulConfigRead; diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h index cc9e2cb44..d5a32cddf 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h @@ -38,11 +38,11 @@ #include "Lib/PrinterCommands.h" /* Macros: */ - /** Pipe number of the Printer data IN pipe. */ - #define PRINTER_DATA_IN_PIPE 1 + /** Pipe address of the Printer data IN pipe. */ + #define PRINTER_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Printer data OUT pipe. */ - #define PRINTER_DATA_OUT_PIPE 2 + /** Pipe address of the Printer data OUT pipe. */ + #define PRINTER_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c index 04930009e..df317ef62 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c @@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the RNDIS data IN pipe */ - Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the RNDIS data OUT pipe */ - Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the RNDIS notification pipe */ - Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(RNDIS_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h index e9cf19f4c..19f26b408 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "RNDISEthernetHost.h" /* Macros: */ - /** Pipe number for the RNDIS data IN pipe. */ - #define RNDIS_DATA_IN_PIPE 1 + /** Pipe address for the RNDIS data IN pipe. */ + #define RNDIS_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the RNDIS data OUT pipe. */ - #define RNDIS_DATA_OUT_PIPE 2 + /** Pipe address for the RNDIS data OUT pipe. */ + #define RNDIS_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number for the RNDIS notification pipe. */ - #define RNDIS_NOTIFICATION_PIPE 3 + /** Pipe address for the RNDIS notification IN pipe. */ + #define RNDIS_NOTIFICATION_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c index 269dc3ba4..c5c78ce60 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c @@ -115,16 +115,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the Still Image data IN pipe */ - Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the Still Image data OUT pipe */ - Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the Still Image events pipe */ - Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(SIMAGE_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h index 04b81a281..93dcfc644 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "StillImageHost.h" /* Macros: */ - /** Pipe number of the Still Image data IN pipe. */ - #define SIMAGE_DATA_IN_PIPE 1 + /** Pipe address of the Still Image data IN pipe. */ + #define SIMAGE_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number of the Still Image data OUT pipe. */ - #define SIMAGE_DATA_OUT_PIPE 2 + /** Pipe address of the Still Image data OUT pipe. */ + #define SIMAGE_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number of the Still Image events pipe. */ - #define SIMAGE_EVENTS_PIPE 3 + /** Pipe address of the Still Image events IN pipe. */ + #define SIMAGE_EVENTS_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c index 4126d761d..552b02aff 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c @@ -131,16 +131,13 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the CDC data IN pipe */ - Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); /* Configure the CDC data OUT pipe */ - Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); /* Configure the CDC notification pipe */ - Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(CDC_NOTIFICATION_PIPE, EP_TYPE_INTERRUPT, NotificationEndpoint->EndpointAddress, NotificationEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(NotificationEndpoint->PollingIntervalMS); /* Valid data found, return success */ diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h index c5a60b48a..e9f12dcc4 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h @@ -42,14 +42,14 @@ #include "VirtualSerialHost.h" /* Macros: */ - /** Pipe number for the CDC data IN pipe. */ - #define CDC_DATA_IN_PIPE 1 + /** Pipe address for the CDC data IN pipe. */ + #define CDC_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the CDC data OUT pipe. */ - #define CDC_DATA_OUT_PIPE 2 + /** Pipe address for the CDC data OUT pipe. */ + #define CDC_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - /** Pipe number for the CDC notification pipe. */ - #define CDC_NOTIFICATION_PIPE 3 + /** Pipe address for the CDC notification IN pipe. */ + #define CDC_NOTIFICATION_PIPE (PIPE_DIR_IN | 3) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/LUFA.pnproj b/LUFA.pnproj index 4fc91f63c..16ad85f30 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/LUFA/CodeTemplates/LUFAConfig.h b/LUFA/CodeTemplates/LUFAConfig.h index 35e8f6586..0c9dca363 100644 --- a/LUFA/CodeTemplates/LUFAConfig.h +++ b/LUFA/CodeTemplates/LUFAConfig.h @@ -157,6 +157,10 @@ // #define NO_AUTO_VBUS_MANAGEMENT // #define INVERTED_VBUS_ENABLE_LINE + #else + + #error Unsupported architecture for this LUFA configuration file. + #endif #endif diff --git a/LUFA/Common/ArchitectureSpecific.h b/LUFA/Common/ArchitectureSpecific.h index 3ba7a5c0a..f7dca6631 100644 --- a/LUFA/Common/ArchitectureSpecific.h +++ b/LUFA/Common/ArchitectureSpecific.h @@ -63,25 +63,27 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) - /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG - * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO - * mode. - * - * \note This macro is not available for all architectures. - */ - #define JTAG_DISABLE() MACROS{ \ - __asm__ __volatile__ ( \ - "in __tmp_reg__,__SREG__" "\n\t" \ - "cli" "\n\t" \ - "out %1, %0" "\n\t" \ - "out __SREG__, __tmp_reg__" "\n\t" \ - "out %1, %0" "\n\t" \ - : \ - : "r" (1 << JTD), \ - "M" (_SFR_IO_ADDR(MCUCR)) \ - : "r0"); \ - }MACROE + #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__) + #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) + /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG + * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO + * mode. + * + * \note This macro is not available for all architectures. + */ + #define JTAG_DISABLE() MACROS{ \ + __asm__ __volatile__ ( \ + "in __tmp_reg__,__SREG__" "\n\t" \ + "cli" "\n\t" \ + "out %1, %0" "\n\t" \ + "out __SREG__, __tmp_reg__" "\n\t" \ + "out %1, %0" "\n\t" \ + : \ + : "r" (1 << JTD), \ + "M" (_SFR_IO_ADDR(MCUCR)) \ + : "r0"); \ + }MACROE + #endif /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer @@ -116,9 +118,10 @@ * * \param[in] Condition Condition that will be evaluated, */ - #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { printf_P(PSTR("%s: Function \"%s\", Line %d: " \ - "Assertion \"%s\" failed.\r\n"), \ - __FILE__, __func__, __LINE__, #Condition); } }MACROE + #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \ + printf_P(PSTR("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n"), \ + __FILE__, __func__, __LINE__, #Condition); } }MACROE #if !defined(pgm_read_ptr) || defined(__DOXYGEN__) /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is currently a wrapper for the @@ -135,6 +138,14 @@ */ #define pgm_read_ptr(Address) (void*)pgm_read_word(Address) #endif + #elif (ARCH == ARCH_UC3) + #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::) + #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::) + #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE + #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \ + printf("%s: Function \"%s\", Line %d: " \ + "Assertion \"%s\" failed.\r\n"), \ + __FILE__, __func__, __LINE__, #Condition); } }MACROE #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Common/BoardTypes.h b/LUFA/Common/BoardTypes.h index 1a3fccb28..0a40b1910 100644 --- a/LUFA/Common/BoardTypes.h +++ b/LUFA/Common/BoardTypes.h @@ -204,6 +204,16 @@ /** Selects the Bitwizard Big-Multio specific board drivers, including the driver for the board LEDs. */ #define BOARD_BIGMULTIO 46 + /** Selects the DorkbotPDX Duce specific board drivers, including the driver for the board LEDs. */ + #define BOARD_DUCE 47 + + /** Selects the Olimex AVR-USB-32U4 specific board drivers, including the Button and LED drivers. */ + #define BOARD_OLIMEX32U4 48 + + /** Selects the Olimex AVR-USB-T32U4 specific board drivers, including the Button and LED drivers. */ + #define BOARD_OLIMEXT32U4 49 + + #if !defined(__DOXYGEN__) #define BOARD_ BOARD_NONE diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index b35a39cb8..f8e1b8f48 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -10,9 +10,15 @@ * New: * - Core: * - Added support for the BitWizard Multio and Big-Multio boards + * - Added support for the DorkbotPDX Duce board + * - Added support for the Olimex AVR-USB-32U4 board + * - Added support for the Olimex AVR-USB-T32U4 board + * - Added new Endpoint_ConfigureEndpointTable() function + * - Added new Pipe_ConfigurePipeTable() function * - Library Applications: * - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices * - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use + * - Added new SerialToLCD user project contributed by Simon Foster * * Changed: * - Core: @@ -20,10 +26,26 @@ * - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments * - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure * - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release + * - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index + * - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint + * address and type + * - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters + * - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index + * - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type + * - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter + * - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters + * - Added support for various assert and debugging macros for the UC3 devices + * - Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues + * on some architectures (thanks to Darren Gibbs) + * - Changed board LED driver implementations of LEDs_ToggleLEDs() for the AVR8 architecture to use the fast PIN register toggle alternative function for speed * - Library Applications: * - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target * - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders * - Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed + * - The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally + * during the reset phase + * - Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen) * * Fixed: * - Core: @@ -33,11 +55,19 @@ * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid) * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin) * - Fixed inverted LED logic in the OLIMEX162 board LED driver + * - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock) + * - Fixed inverted LED logic in the USB2AX board LED driver + * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by + * the stack (thanks to Jonathan Hudgins) + * - Fixed broken MIDI host driver MIDI_Host_ReceiveEventPacket() function due to not unfreezing the MIDI data IN pipe before use (thanks to Michael Brown) * - Library Applications: * - Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter) * - Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is * defined (thanks to Steven Morehouse) + * - Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used * - Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock) + * - Fixed incorrect DFU version number reported to the host in the DFU bootloader descriptors (thanks to Georg Glock) + * - Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock) * * \section Sec_ChangeLog120219 Version 120219 * New: diff --git a/LUFA/DoxygenPages/DeviceSupport.txt b/LUFA/DoxygenPages/DeviceSupport.txt index c8083d275..d1fe4f3cb 100644 --- a/LUFA/DoxygenPages/DeviceSupport.txt +++ b/LUFA/DoxygenPages/DeviceSupport.txt @@ -106,6 +106,7 @@ * - Busware BUI * - Busware CUL V3 * - Busware TUL + * - DorkbotPDX Duce * - Fletchtronics Bumble-B (using manufacturer recommended peripheral layout) * - Kernel Concepts USBFOO * - Linnix UDIP @@ -115,6 +116,8 @@ * - Microsin AVR-USB162 * - Minimus USB * - Olimex AVR-USB-162 + * - Olimex AVR-USB-32U4 + * - Olimex AVR-USB-T32U4 * - Paranoid Studio's US2AX (V1, V2 and V3 hardware revisions) * - PJRC Teensy (1.x and 2.x versions) * - Sparkfun U2 Breakout Board @@ -377,6 +380,41 @@ * Yes * No * + * + * ATXMEGA64C3 + * Yes + * No + * + * + * ATXMEGA128C3 + * Yes + * No + * + * + * ATXMEGA192C3 + * Yes + * No + * + * + * ATXMEGA256C3 + * Yes + * No + * + * + * ATXMEGA384C3 + * Yes + * No + * + * + * ATXMEGA16C4 + * Yes + * No + * + * + * ATXMEGA32C4 + * Yes + * No + * * * * \section Sec_XMEGASupport_Boards Supported Atmel Boards diff --git a/LUFA/DoxygenPages/FutureChanges.txt b/LUFA/DoxygenPages/FutureChanges.txt index b75e94d7a..d0453a207 100644 --- a/LUFA/DoxygenPages/FutureChanges.txt +++ b/LUFA/DoxygenPages/FutureChanges.txt @@ -22,12 +22,10 @@ * -# Pull out third party libraries into a separate folder and reference them as required * -# Add a LUFA_YIELD macro for integration into a third-party RTOS * -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects - * -# Consider switch from endpoint numbers to full endpoint addresses to ease future architecture expansion * -# Fix HID report parser usage support for array types * -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed * -# Add MANDATORY_EVENT_FUNCTIONS compile time option * -# Add watchdog support to the library and apps/bootloaders - * -# Fix Still Image Host class driver - missing reqs, parameters * - Testing/Verification * -# Re-run USBIF test suite on all classes to formally verify operation * -# Implement automated functional testing of all demos diff --git a/LUFA/DoxygenPages/KnownIssues.txt b/LUFA/DoxygenPages/KnownIssues.txt new file mode 100644 index 000000000..9b648144b --- /dev/null +++ b/LUFA/DoxygenPages/KnownIssues.txt @@ -0,0 +1,40 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + + /** \page Page_KnownIssues Known Issues + * The following are known issues present in each official LUFA release. This list should contain all known + * issues in the library. Most of these issues should be corrected in the future release - see + * \ref Page_FutureChanges for a list of planned changes in future releases. + * + * \section Sec_KnownIssuesXXXXXX Version XXXXXX + * - AVR8 Architecture + * - No known issues. + * - XMEGA Architecture + * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release, + * although the architecture is supported in the LUFA core library. + * - Endpoints of more than 64 bytes are not currently supported in this release. + * - Isochronous endpoints are not currently supported in this release. As a result, the audio class + * cannot be used on XMEGA devices. + * - Multiple-bank endpoints are not currently supported in this release. + * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata + * relating to the USB controller. + * - UC3 Architecture + * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release, + * although the architecture is supported in the LUFA core library. + * - DMA transfers to and from the USB controller are not yet implemented for this release. + * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their + * altered USB controller design. + * - The various \c CreateStream() functions for creating standard \c compatible virtual file + * streams are not available on the UC3 architecture, due to a lack of suitable library support. + * - Architecture Independant + * - The HID parser fails for array type elements that have a MIN and MAX usage applied; each element + * in the array will receive a unique incrementing usage from the MIN value, up to MAX. + * - The current application makefiles do not work if the output directory is not the same directory + * as the makefile itself. + * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used + * and a lengthy USB operation is initiated. + */ + diff --git a/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/LUFA/DoxygenPages/LUFAPoweredProjects.txt index ea0870515..842d98fd9 100644 --- a/LUFA/DoxygenPages/LUFAPoweredProjects.txt +++ b/LUFA/DoxygenPages/LUFAPoweredProjects.txt @@ -20,6 +20,7 @@ * * \li AVR-USB-162, a USBKEY-like development board for the AT90USB162: http://olimex.com/dev/avr-usb-162.html * \li Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito + * \li Duce, the sucessor to the Benito #7: http://dorkbotpdx.org/wiki/duce * \li JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html * \li Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/ * \li Microsin AVR-USB162 breakout board, a DIY AT90USB162 development board: http://microsin.ru/content/view/685/44/ @@ -36,6 +37,7 @@ * The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library * can be incorporated into many different applications. * + * \li Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/ * \li Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia * \li Arcade Joystick: http://jamie.lentin.co.uk/embedded/arcade-joystick/ * \li AttoBasic AVR BASIC interpreter: http://www.cappels.org/dproj/AttoBasic2_1/AttoBasic_2.1_with_USB_and_Arduino_support.html diff --git a/LUFA/DoxygenPages/LibraryResources.txt b/LUFA/DoxygenPages/LibraryResources.txt index 7137a56a0..ac1915c53 100644 --- a/LUFA/DoxygenPages/LibraryResources.txt +++ b/LUFA/DoxygenPages/LibraryResources.txt @@ -9,6 +9,7 @@ * * \section Sec_UnofficialResources Unofficial Resources * Unofficial Russian LUFA documentation translation: http://microsin.ru/Download.cnt/doc/LUFA/ \n + * Tutorial for LUFA USB Control Transfers: http://www.avrbeginners.net/new/tutorials/usb-control-transfers-with-lufa/ * * \section Sec_ProjectPages LUFA Related Webpages * Project Homepage: http://www.lufa-lib.org \n @@ -22,8 +23,8 @@ * * \section Sec_InDevelopment Latest In-Development Source Code * Issue Tracker: http://www.lufa-lib.org/tracker \n - * SVN Access: http://www.lufa-lib.org/svn \n - * GIT Access: http://www.lufa-lib.org/git \n + * Public SVN Repository: http://www.lufa-lib.org/svn \n + * Public GIT Repository: http://www.lufa-lib.org/git \n * Latest Repository Source Archive: http://www.lufa-lib.org/latest-archive \n * Commit RSS Feed: http://www.lufa-lib.org/rss \n * diff --git a/LUFA/DoxygenPages/MainPage.txt b/LUFA/DoxygenPages/MainPage.txt index ed96d1a66..e737c39b5 100644 --- a/LUFA/DoxygenPages/MainPage.txt +++ b/LUFA/DoxygenPages/MainPage.txt @@ -42,6 +42,7 @@ * \li \subpage Page_Donating - Donating to support this project * \li \subpage Page_DeviceSupport - Current Device and Hardware Support * \li \subpage Page_ChangeLog - Project Changelog + * \li \subpage Page_KnownIssues - Known Issues * \li \subpage Page_FutureChanges - Planned Changes to the Library * \li \subpage Page_GettingStarted - Getting started with LUFA * \li \subpage Page_DevelopingWithLUFA - Developing with LUFA diff --git a/LUFA/DoxygenPages/MigrationInformation.txt b/LUFA/DoxygenPages/MigrationInformation.txt index 93082bb5c..f0fd9b210 100644 --- a/LUFA/DoxygenPages/MigrationInformation.txt +++ b/LUFA/DoxygenPages/MigrationInformation.txt @@ -17,10 +17,33 @@ * - The HID_DESCRIPTOR_JOYSTICK() macro no longer takes a variable number of axis as a parameter, due to OS incompatibilities; this macro now uses a fixed * 3 axis of data. User applications should update their calls to this macro and their report structures to suit a fixed 3-axis joystick report. If a user * application requires more than 3 axis' of data, a custom report descriptor will need to be constructed by hand. + * - The \ref Endpoint_ConfigureEndpoint() function no longer takes in masks for the banks and direction; the number of banks is now an integer argument, and + * the direction is obtained from the full endpoint address within the device. Applications calling Endpoint_ConfigureEndpoint() should update their API + * call to use a full endpoint address (including ENDPOINT_DIR_IN or ENDPOINT_DIR_OUT direction in the MSB of the endpoint address) and an integer number + * of banks. + * - All endpoint functions now operate on full endpoint addresses within the device, rather than a directionless endpoint index. Applications should update + * their API calls to use full endpoint addresses when required within the device. + * - All device mode class drivers have been updated to use a new unified endpoint description structure for all endpoints; existing applications will need + * to update their class driver struct instantiation to match the new scheme (see \ref USB_Endpoint_Table_t). + * - The \c ENDPOINT_BANKS_SUPPORTED() and \c ENDPOINT_MAX_ENDPOINT_SIZE() macros have been removed, as these do not function correctly with the new addressing + * scheme for the endpoint APIs. Please refer to the target device's datasheet for the maximum bank size of each endpoint. + * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains seperate \c CableIndex and \c Command entries; these have been combined + * into a single \c Event element which can be contructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure + * element name. * * Host Mode * - The Android Accessory Host class driver property strings are now a array of \c char* rather than a struct of named pointers. Existing applications * should use C99 Designated Initializers with the property string indexes located in \ref AOA_Strings_t instead. + * - The \ref Pipe_ConfigurePipe() function no longer takes in masks for the banks and token; the number of banks is now an integer argument, and the token + * is now inferred from the full pipe address within the device, and the pipe type. Applications calling Pipe_ConfigurePipe() should update their API + * call to use a full pipe address (including PIPE_DIR_IN or PIPE_DIR_OUT direction in the MSB of the pipe address) and an integer number of banks. + * - All pipe functions now operate on full pipe addresses within the device, rather than a directionless pipe index. Applications should update their API + * calls to use full pipe addresses when required within the device. + * - All host mode class drivers have been updated to use a new unified pipe description structure for all pipes; existing applications will need to update + * their class driver struct instantiation to match the new scheme (see \ref USB_Pipe_Table_t). + * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains seperate \c CableIndex and \c Command entries; these have been combined + * into a single \c Event element which can be contructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure + * element name. * * \section Sec_Migration120219 Migrating from 111009 to 120219 * USB Core @@ -130,7 +153,7 @@ * eliminate any casting of descriptor pointers to a non \c const pointer. * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation * for each class driver for the new class specific descriptor type names. - * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \ref ENDPOINT_BANKS_SUPPORTED() and now returns the total number of + * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \c ENDPOINT_BANKS_SUPPORTED() and now returns the total number of * banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the * macro is equal to or greater than 2 to regain the previous functionality. * - The \c EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after) diff --git a/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h b/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h index 3fca6562e..661749beb 100644 --- a/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Adafruit U4 Breakout board (http://ladyada.net/products/atmega32u4breakout). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTE.6
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTE ^= LEDMask; + PINE = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h index adec49adf..c7cce17c2 100644 --- a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel ATAVRUSBRF01. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h index 77fc05bee..2cc953b03 100644 --- a/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h @@ -42,6 +42,12 @@ * * Board specific LED driver header for the Atmel ATAVRUSBRF01. * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenRX LEDHighPORTD.0
LEDS_LED2RedTX LEDHighPORTD.1
+ * * @{ */ @@ -61,15 +67,6 @@ #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. #endif - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Macros: */ - #define LEDS_PORTD_LEDS (LEDS_LED1 | LEDS_LED2) - #define LEDS_PORTE_LEDS (LEDS_LED3 | LEDS_LED4) - - #define LEDS_PORTE_MASK_SHIFT 4 - #endif - /* Public Interface - May be used in end-application: */ /* Macros: */ /** LED mask for the first LED on the board. */ @@ -121,7 +118,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h b/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h index a7ce1b5c7..800fa1544 100644 --- a/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h b/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h index 6e7de0786..875130fbf 100644 --- a/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h @@ -42,6 +42,12 @@ * * Board specific LED driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito). * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenTX LEDLowPORTC.7
LEDS_LED2RedRX LEDLowPORTC.6
+ * * @{ */ @@ -112,7 +118,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTC ^= LEDMask; + PINC = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h b/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h index 77b7d97ae..89516dca0 100644 --- a/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio). * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1UnknownLED0HighPORTF.6
LEDS_LED2UnknownLED1HighPORTF.7
LEDS_LED3UnknownLED2HighPORTE.2
+ * * @{ */ @@ -132,8 +139,8 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTF ^= (LEDMask & LEDS_PORTF_LEDS); - PORTE ^= (LEDMask & LEDS_PORTE_LEDS); + PINF = (LEDMask & LEDS_PORTF_LEDS); + PINE = (LEDMask & LEDS_PORTE_LEDS); } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h b/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h index 4313db570..12124209d 100644 --- a/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h @@ -40,7 +40,13 @@ * \defgroup Group_LEDs_BLACKCAT BLACKCAT * \brief Board specific LED driver header for the BLACKCAT USB JTAG. * - * Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB/. + * Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB). + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1UnknownLED0HighPORTD.6
LEDS_LED2UnknownLED1HighPORTD.3
* * @{ */ @@ -112,7 +118,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/BUI/LEDs.h b/LUFA/Drivers/Board/AVR8/BUI/LEDs.h index f49f51d13..039e9efa7 100644 --- a/LUFA/Drivers/Board/AVR8/BUI/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/BUI/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for the Busware BUI (http://www.busware.de/tiki-index.php?page=BUI). * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1RedRGB LEDHighPORTC.2
LEDS_LED2GreenRGB LEDHighPORTC.3
LEDS_LED3BlueRGB LEDHighPORTC.4
+ * * @{ */ @@ -115,7 +122,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTC ^= LEDMask; + PINC = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h index 8fdd00202..a4d816975 100644 --- a/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h @@ -44,6 +44,11 @@ * third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral * layout for buttons, LEDs and a Joystick. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h index f95253682..6b0df050b 100644 --- a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h @@ -44,6 +44,11 @@ * third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral * layout for buttons, LEDs and a Joystick. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
PORTD.2PORTD.3PORTD.0PORTD.1PORTD.4
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h index 9f82cc1ff..a09ab9698 100644 --- a/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h @@ -44,6 +44,14 @@ * third-party board does not include any on-board peripherals, but does have an officially recommended external * peripheral layout for buttons, LEDs and a Joystick. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1N/AUser SuppliedHighPORTB.4
LEDS_LED2N/AUser SuppliedHighPORTB.5
LEDS_LED3N/AUser SuppliedHighPORTB.6
LEDS_LED4N/AUser SuppliedHighPORTB.7
+ * * @{ */ @@ -120,7 +128,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= LEDMask; + PINB = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h index 19e09fe80..16feb7d23 100644 --- a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h b/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h index 3fb8c874b..617291204 100644 --- a/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1YellowGeneral IndicatorHighPORTE.6
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTE ^= LEDMask; + PINE = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h b/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h new file mode 100644 index 000000000..1063d752d --- /dev/null +++ b/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h @@ -0,0 +1,147 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Board specific LED driver header for the DorkbotPDX Duce. + * \copydetails Group_LEDs_DUCE + * + * \note This file should not be included directly. It is automatically included as needed by the LEDs driver + * dispatch header located in LUFA/Drivers/Board/LEDs.h. + */ + +/** \ingroup Group_LEDs + * \defgroup Group_LEDs_DUCE DUCE + * \brief Board specific LED driver header for the DorkbotPDX Duce. + * + * Board specific LED driver header for the DorkbotPDX Duce (http://dorkbotpdx.org/wiki/duce). + * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1RedBicolor Indicator 1HighPORTC.4
LEDS_LED2GreenBicolor Indicator 1HighPORTC.5
LEDS_LED3RedBicolor Indicator 2HighPORTC.6
LEDS_LED4GreenBicolor Indicator 2HighPORTC.7
+ * + * @{ + */ + +#ifndef __LEDS_DUCE_H__ +#define __LEDS_DUCE_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 (1 << 4) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 5) + + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 (1 << 6) + + /** LED mask for the fourth LED on the board. */ + #define LEDS_LED4 (1 << 7) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4) + + /** LED mask for none of the board LEDs. */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + DDRC |= LEDS_ALL_LEDS; + PORTC &= ~LEDS_ALL_LEDS; + } + + static inline void LEDs_Disable(void) + { + DDRC &= ~LEDS_ALL_LEDS; + PORTC &= ~LEDS_ALL_LEDS; + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + PORTC |= LEDMask; + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + PORTC &= ~LEDMask; + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + PORTC = ((PORTC & ~LEDS_ALL_LEDS) | LEDMask); + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, + const uint8_t ActiveMask) + { + PORTC = ((PORTC & ~LEDMask) | ActiveMask); + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + PINC = LEDMask; + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return (PORTC & LEDS_ALL_LEDS); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h b/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h index 89ba2742e..829f35650 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel EVK527. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h index 595492fe2..0f7b6745d 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h @@ -42,6 +42,11 @@ * * Board specific Dataflash driver header for the Atmel EVK527. * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB321C (4MB)PORTE.6SPI0
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h b/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h index 5315c2e07..b264f475f 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel EVK527. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
PORTF.4PORTF.5PORTF.7PORTC.6PORTF.6
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h b/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h index 551bba613..7e3dc4f5b 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for the Atmel EVK527. * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.5
LEDS_LED2GreenGeneral IndicatorHighPORTD.6
LEDS_LED3GreenGeneral IndicatorHighPORTD.7
+ * * @{ */ @@ -115,7 +122,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h b/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h index a3a246dd9..d36a115ef 100644 --- a/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h b/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h index 3361f58ac..adca2dee4 100644 --- a/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.4
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h index 45ca1243f..815fc29b2 100644 --- a/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h @@ -42,6 +42,12 @@ * * Board specific LED driver header for the Maximus (http://www.avrusb.com/). * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenLGHighPORTB.6
LEDS_LED2RedLRHighPORTB.7
+ * * @{ */ @@ -112,7 +118,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= LEDMask; + PINB = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h index 5c5825afb..731d1b05b 100644 --- a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h @@ -100,6 +100,18 @@ * * Board specific Buttons driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2). * + * BOARD_MICROPENDOUS_1 and BOARD_MICROPENDOUS_32U2: + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * + * Other Revisions: + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h index 649d961e9..963c15ae4 100644 --- a/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h @@ -56,6 +56,18 @@ * * Board specific LED driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2). * + * BOARD_MICROPENDOUS_32U2: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.6
+ * + * Other Revisions: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTB.1
+ * * @{ */ @@ -92,6 +104,7 @@ #define _BOARD_LED_CONCAT(Reg, Letter) _BOARD_LED_CONCAT2(Reg, Letter) #define _BOARD_LED_PORT _BOARD_LED_CONCAT(PORT, _BOARD_LED_PORTLETTER) + #define _BOARD_LED_PIN _BOARD_LED_CONCAT(PIN, _BOARD_LED_PORTLETTER) #define _BOARD_LED_DDR _BOARD_LED_CONCAT(DDR, _BOARD_LED_PORTLETTER) #endif @@ -143,7 +156,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - _BOARD_LED_PORT ^= LEDMask; + _BOARD_LED_PIN = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h b/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h index 27d75bfed..3105ba8a1 100644 --- a/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h b/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h index 36f610d04..31aaa6707 100644 --- a/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorLowPORTD.4
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h b/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h index 016ea2d37..f8666cf13 100644 --- a/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the MINIMUS. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h b/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h index 11ab648ba..f23317d1c 100644 --- a/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for the Minimus USB (http://www.minimususb.com/). * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1RedGeneral IndicatorLowPORTD.5
LEDS_LED2GreenGeneral IndicatorLowPORTD.6
LEDS_LED3BlueGeneral IndicatorLowPORTD.7
+ * * @{ */ @@ -69,11 +76,14 @@ /** LED mask for the second LED on the board. */ #define LEDS_LED2 (1 << 6) + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 (1 << 7) + /** LED mask for all the LEDs on the board. */ - #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2) + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3) /** LED mask for the none of the board LEDs. */ - #define LEDS_NO_LEDS 1 + #define LEDS_NO_LEDS 0 /* Inline Functions: */ #if !defined(__DOXYGEN__) @@ -112,7 +122,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h b/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h index af2f7b377..64f68a53d 100644 --- a/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for the Bitwizard Multio (http://www.bitwizard.nl/wiki/index.php/USB-multio). * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.0
LEDS_LED2GreenGeneral IndicatorHighPORTC.2
LEDS_LED3GreenGeneral IndicatorHighPORTD.7
+ * * @{ */ @@ -132,8 +139,8 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= (LEDMask & LEDS_PORTD_LEDS); - PORTC ^= (LEDMask & LEDS_PORTC_LEDS); + PIND = (LEDMask & LEDS_PORTD_LEDS); + PINC = (LEDMask & LEDS_PORTC_LEDS); } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h b/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h index b6d75bed0..1b7c2910f 100644 --- a/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Olimex AVR-USB-162 Development Board (http://www.olimex.com/dev/avr-usb-162.html). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h b/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h index c9bd3f135..21fb500cc 100644 --- a/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Olimex AVR-USB-162 (http://www.olimex.com/dev/avr-usb-162.html). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1YellowGeneral IndicatorHighPORTD.4
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h b/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h new file mode 100644 index 000000000..d42c43474 --- /dev/null +++ b/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h @@ -0,0 +1,103 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board. + * \copydetails Group_Buttons_OLIMEX32U4 + * + * \note This file should not be included directly. It is automatically included as needed by the Buttons driver + * dispatch header located in LUFA/Drivers/Board/Buttons.h. + */ + +/** \ingroup Group_Buttons + * \defgroup Group_Buttons_OLIMEX32U4 OLIMEX32U4 + * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board. + * + * Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board (http://www.olimex.com/dev/olimexino-32u4.html). + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * + * @{ + */ + +#ifndef __BUTTONS_OLIMEX32U4_H__ +#define __BUTTONS_OLIMEX32U4_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_BUTTONS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Button mask for the first button on the board. */ + #define BUTTONS_BUTTON1 (1 << 2) + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Buttons_Init(void) + { + DDRE &= ~BUTTONS_BUTTON1; + PORTE |= BUTTONS_BUTTON1; + } + + static inline void Buttons_Disable(void) + { + DDRE &= ~BUTTONS_BUTTON1; + PORTE &= ~BUTTONS_BUTTON1; + } + + static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Buttons_GetStatus(void) + { + return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h b/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h new file mode 100644 index 000000000..62b7c7829 --- /dev/null +++ b/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h @@ -0,0 +1,179 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Board specific LED driver header for the Olimex AVR-USB-32U4. + * \copydetails Group_LEDs_OLIMEX32U4 + * + * \note This file should not be included directly. It is automatically included as needed by the LEDs driver + * dispatch header located in LUFA/Drivers/Board/LEDs.h. + */ + +/** \ingroup Group_LEDs + * \defgroup Group_LEDs_OLIMEX32U4 OLIMEX32U4 + * \brief Board specific LED driver header for the Olimex AVR-USB-32U4. + * + * Board specific LED driver header for the Olimex AVR-USB-32U4 (http://www.olimex.com/dev/olimexino-32u4.html). + * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenTXHighPORTD.5
LEDS_LED2YellowRXHighPORTB.0
LEDS_LED3GreenGeneral Indicator (Default Unconnected)HighPORTE.6
LEDS_LED4YellowGeneral Indicator (Default Unconnected)HighPORTB.5
+ * + * @{ + */ + +#ifndef __LEDS_OLIMEX32U4_H__ +#define __LEDS_OLIMEX32U4_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define LEDS_PORTB_LEDS (LEDS_LED2 | LEDS_LED4) + #define LEDS_PORTD_LEDS (LEDS_LED1) + #define LEDS_PORTE_LEDS (LEDS_LED3) + + #define LEDS_PORTD_MASK_SHIFT 1 + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 ((1 << 5) >> LEDS_PORTD_MASK_SHIFT) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 0) + + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 (1 << 5) + + /** LED mask for the fourth LED on the board. */ + #define LEDS_LED4 (1 << 6) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4) + + /** LED mask for none of the board LEDs. */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + DDRB |= LEDS_PORTB_LEDS; + PORTB &= ~LEDS_PORTB_LEDS; + DDRD |= (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT); + PORTD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT); + DDRE |= LEDS_PORTE_LEDS; + PORTE &= ~LEDS_PORTE_LEDS; + } + + static inline void LEDs_Disable(void) + { + DDRB &= LEDS_PORTB_LEDS; + PORTB &= ~LEDS_PORTB_LEDS; + DDRD &= (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT); + PORTD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT); + DDRE &= LEDS_PORTE_LEDS; + PORTE &= ~LEDS_PORTE_LEDS; + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + PORTB |= (LEDMask & LEDS_PORTB_LEDS); + PORTD |= ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT); + PORTE |= (LEDMask & LEDS_PORTE_LEDS); + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + PORTB &= ~(LEDMask & LEDS_PORTB_LEDS); + PORTD &= ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT); + PORTE &= ~(LEDMask & LEDS_PORTE_LEDS); + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + PORTB = ((PORTB & ~LEDS_PORTB_LEDS) | (LEDMask & LEDS_PORTB_LEDS)); + PORTD = ((PORTD & ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT)) | + ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT)); + PORTE = ((PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS)); + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, + const uint8_t ActiveMask) + { + PORTB = ((PORTB & ~(LEDMask & LEDS_PORTB_LEDS)) | (ActiveMask & LEDS_PORTB_LEDS)); + PORTD = ((PORTD & ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT)) | + ((ActiveMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT)); + PORTE = ((PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS)); + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + PINB = (LEDMask & LEDS_PORTB_LEDS); + PIND = ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT); + PINE = (LEDMask & LEDS_PORTE_LEDS); + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return ((PORTB & LEDS_PORTB_LEDS) | + ((PORTD & (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT)) >> LEDS_PORTD_MASK_SHIFT) | + (PORTE & LEDS_PORTE_LEDS)); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h b/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h new file mode 100644 index 000000000..106687a0d --- /dev/null +++ b/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h @@ -0,0 +1,103 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Board specific Buttons driver header for the Olimex AVR-USB-T32U4 Development Board. + * \copydetails Group_Buttons_OLIMEXT32U4 + * + * \note This file should not be included directly. It is automatically included as needed by the Buttons driver + * dispatch header located in LUFA/Drivers/Board/Buttons.h. + */ + +/** \ingroup Group_Buttons + * \defgroup Group_Buttons_OLIMEXT32U4 OLIMEXT32U4 + * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board. + * + * Board specific Buttons driver header for the Olimex AVR-USB-T32U4 Development Board (http://www.olimex.com/dev/avr-t32u4.html). + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * + * @{ + */ + +#ifndef __BUTTONS_OLIMEXT32U4_H__ +#define __BUTTONS_OLIMEXT32U4_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_BUTTONS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Button mask for the first button on the board. */ + #define BUTTONS_BUTTON1 (1 << 2) + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void Buttons_Init(void) + { + DDRE &= ~BUTTONS_BUTTON1; + PORTE |= BUTTONS_BUTTON1; + } + + static inline void Buttons_Disable(void) + { + DDRE &= ~BUTTONS_BUTTON1; + PORTE &= ~BUTTONS_BUTTON1; + } + + static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t Buttons_GetStatus(void) + { + return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h b/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h new file mode 100644 index 000000000..1602af842 --- /dev/null +++ b/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h @@ -0,0 +1,169 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Board specific LED driver header for the Olimex AVR-USB-T32U4. + * \copydetails Group_LEDs_OLIMEXT32U4 + * + * \note This file should not be included directly. It is automatically included as needed by the LEDs driver + * dispatch header located in LUFA/Drivers/Board/LEDs.h. + */ + +/** \ingroup Group_LEDs + * \defgroup Group_LEDs_OLIMEXT32U4 OLIMEXT32U4 + * \brief Board specific LED driver header for the Olimex AVR-USB-T32U4. + * + * Board specific LED driver header for the Olimex AVR-USB-T32U4 (http://www.olimex.com/dev/avr-t32u4.html). + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenTXHighPORTD.5
LEDS_LED2YellowRXHighPORTB.0
LEDS_LED3N/AGeneral Indicator (Not Mounted)HighPORTE.6
+ * + * @{ + */ + +#ifndef __LEDS_OLIMEXT32U4_H__ +#define __LEDS_OLIMEXT32U4_H__ + + /* Includes: */ + #include "../../../../Common/Common.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_LEDS_H) + #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead. + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define LEDS_PORTB_LEDS (LEDS_LED2) + #define LEDS_PORTD_LEDS (LEDS_LED1) + #define LEDS_PORTE_LEDS (LEDS_LED3) + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** LED mask for the first LED on the board. */ + #define LEDS_LED1 (1 << 5) + + /** LED mask for the second LED on the board. */ + #define LEDS_LED2 (1 << 0) + + /** LED mask for the third LED on the board. */ + #define LEDS_LED3 (1 << 6) + + /** LED mask for all the LEDs on the board. */ + #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3) + + /** LED mask for none of the board LEDs. */ + #define LEDS_NO_LEDS 0 + + /* Inline Functions: */ + #if !defined(__DOXYGEN__) + static inline void LEDs_Init(void) + { + DDRB |= LEDS_PORTB_LEDS; + PORTB &= ~LEDS_PORTB_LEDS; + DDRD |= LEDS_PORTD_LEDS; + PORTD &= ~LEDS_PORTD_LEDS; + DDRE |= LEDS_PORTE_LEDS; + PORTE &= ~LEDS_PORTE_LEDS; + } + + static inline void LEDs_Disable(void) + { + DDRB &= LEDS_PORTB_LEDS; + PORTB &= ~LEDS_PORTB_LEDS; + DDRD &= LEDS_PORTD_LEDS; + PORTD &= ~LEDS_PORTD_LEDS; + DDRE &= LEDS_PORTE_LEDS; + PORTE &= ~LEDS_PORTE_LEDS; + } + + static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) + { + PORTB |= (LEDMask & LEDS_PORTB_LEDS); + PORTD |= (LEDMask & LEDS_PORTD_LEDS); + PORTE |= (LEDMask & LEDS_PORTE_LEDS); + } + + static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) + { + PORTB &= ~(LEDMask & LEDS_PORTB_LEDS); + PORTD &= ~(LEDMask & LEDS_PORTD_LEDS); + PORTE &= ~(LEDMask & LEDS_PORTE_LEDS); + } + + static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) + { + PORTB = ((PORTB & ~LEDS_PORTB_LEDS) | (LEDMask & LEDS_PORTB_LEDS)); + PORTD = ((PORTD & ~LEDS_PORTD_LEDS) | (LEDMask & LEDS_PORTD_LEDS)); + PORTE = ((PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS)); + } + + static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, + const uint8_t ActiveMask) + { + PORTB = ((PORTB & ~(LEDMask & LEDS_PORTB_LEDS)) | (ActiveMask & LEDS_PORTB_LEDS)); + PORTD = ((PORTD & ~(LEDMask & LEDS_PORTD_LEDS)) | (ActiveMask & LEDS_PORTD_LEDS)); + PORTE = ((PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS)); + } + + static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) + { + PINB = (LEDMask & LEDS_PORTB_LEDS); + PIND = (LEDMask & LEDS_PORTD_LEDS); + PINE = (LEDMask & LEDS_PORTE_LEDS); + } + + static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; + static inline uint8_t LEDs_GetLEDs(void) + { + return ((PORTB & LEDS_PORTB_LEDS) | (PORTD & LEDS_PORTD_LEDS) | (PORTE & LEDS_PORTE_LEDS)); + } + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h b/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h index c85d8ad08..7be9b378f 100644 --- a/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel RZUSBSTICK. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1BlueGeneral IndicatorHighPORTD.7
LEDS_LED1RedGeneral IndicatorLowPORTD.5
LEDS_LED1GreenGeneral IndicatorLowPORTE.6
LEDS_LED1YellowGeneral IndicatorLowPORTE.7
+ * * @{ */ @@ -144,8 +152,8 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= (LEDMask & LEDS_PORTD_LEDS); - PORTE ^= ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT); + PIND = (LEDMask & LEDS_PORTD_LEDS); + PINE = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT); } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h b/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h index 898530651..6998fd3f3 100644 --- a/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Sparkfun ATMEGA8U2 breakout board (http://www.sparkfun.com/products/10277). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorLowPORTB.4
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= LEDMask; + PINB = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/STK525/Buttons.h b/LUFA/Drivers/Board/AVR8/STK525/Buttons.h index 13abb8325..a08fa5df5 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/STK525/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel STK525. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h index 67742977c..60375f99a 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h @@ -42,6 +42,11 @@ * * Board specific Dataflash driver header for the Atmel STK525. * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB321C (4MB)PORTB.4SPI0
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/STK525/Joystick.h b/LUFA/Drivers/Board/AVR8/STK525/Joystick.h index 8cc565351..fb6c857a9 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/STK525/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel STK525. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
PORTB.6PORTB.7PORTE.4PORTE.5PORTB.5
+ * * @{ */ @@ -76,7 +81,7 @@ #define JOY_LEFT (1 << 6) /** Mask for the joystick being pushed in the right direction. */ - #define JOY_RIGHT ((1 << 4) >> 1) + #define JOY_RIGHT ((1 << 4) >> JOY_PORTE_MASK_SHIFT) /** Mask for the joystick being pushed in the upward direction. */ #define JOY_UP (1 << 7) diff --git a/LUFA/Drivers/Board/AVR8/STK525/LEDs.h b/LUFA/Drivers/Board/AVR8/STK525/LEDs.h index c0111a263..04d566204 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/STK525/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel STK525. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.4
LEDS_LED2GreenGeneral IndicatorHighPORTD.5
LEDS_LED3GreenGeneral IndicatorHighPORTD.6
LEDS_LED4GreenGeneral IndicatorHighPORTD.7
+ * * @{ */ @@ -118,7 +126,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/STK526/Buttons.h b/LUFA/Drivers/Board/AVR8/STK526/Buttons.h index 2c6b92807..13ec37601 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/STK526/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel STK526. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h index ce20ff1e7..d58ad057c 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h @@ -42,6 +42,11 @@ * * Board specific Dataflash driver header for the Atmel STK525. * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB642D (8MB)PORTC.2SPI0
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/STK526/Joystick.h b/LUFA/Drivers/Board/AVR8/STK526/Joystick.h index 3ab6e8427..823fbf1af 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/STK526/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel STK526. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
PORTB.4PORTB.5PORTB.6PORTB.7PORTB.0
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/STK526/LEDs.h b/LUFA/Drivers/Board/AVR8/STK526/LEDs.h index ed83356af..d254a69b4 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/STK526/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel STK526. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.1
LEDS_LED2GreenGeneral IndicatorHighPORTD.0
LEDS_LED3GreenGeneral IndicatorHighPORTD.5
LEDS_LED4GreenGeneral IndicatorHighPORTD.4
+ * * @{ */ @@ -118,7 +126,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h b/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h index 9a71cf5d5..7149923ea 100644 --- a/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h @@ -51,6 +51,18 @@ * * Board specific LED driver header for the PJRC Teensy boards (http://www.pjrc.com/teensy/index.html). * + * TEENSY: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.6
+ * + * TEENSY2: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorLowPORTD.6
+ * * @{ */ @@ -139,7 +151,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/TUL/Buttons.h b/LUFA/Drivers/Board/AVR8/TUL/Buttons.h index 3eed13a49..76c9d858a 100644 --- a/LUFA/Drivers/Board/AVR8/TUL/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/TUL/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/TUL/LEDs.h b/LUFA/Drivers/Board/AVR8/TUL/LEDs.h index 121f3f483..e659a9a9c 100644 --- a/LUFA/Drivers/Board/AVR8/TUL/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/TUL/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTF.0
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTF ^= LEDMask; + PINF = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h b/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h index b07836418..3df6bacd9 100644 --- a/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Linnix UDIP (http://linnix.com/udip/). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h b/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h index 30eb9ad79..7ad6c44b3 100644 --- a/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Linnix UDIP (http://linnix.com/udip/). * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenBicolor Indicator 1HighPORTB.6
LEDS_LED2RedBicolor Indicator 1HighPORTB.5
LEDS_LED3GreenBicolor Indicator 2HighPORTD.5
LEDS_LED4RedBicolor Indicator 2HighPORTD.4
+ * * @{ */ @@ -133,8 +141,8 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= (LEDMask & LEDS_PORTB_LEDS); - PORTD ^= ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT); + PINB = (LEDMask & LEDS_PORTB_LEDS); + PIND = ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT); } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/UNO/LEDs.h b/LUFA/Drivers/Board/AVR8/UNO/LEDs.h index 1fddba7da..2a6178caa 100644 --- a/LUFA/Drivers/Board/AVR8/UNO/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/UNO/LEDs.h @@ -42,6 +42,12 @@ * * Board specific LED driver header for the Arduino Uno (http://arduino.cc/en/Main/ArduinoBoardUno). * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1YellowRXLowPORTD.4
LEDS_LED2YellowTXLowPORTD.5
+ * * @{ */ @@ -112,7 +118,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h b/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h index 9b83acf9a..73d05a5b3 100644 --- a/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h @@ -51,6 +51,11 @@ * * Board specific Buttons driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h b/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h index c34715e58..12fa73cd1 100644 --- a/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h @@ -51,6 +51,18 @@ * * Board specific LED driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX). * + * USB2AX: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTC.6
+ * + * USB2AX_V3: + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorHighPORTD.1
+ * * @{ */ @@ -96,11 +108,11 @@ static inline void LEDs_Init(void) { #if (BOARD == BOARD_USB2AX) - DDRC |= LEDS_ALL_LEDS; - PORTC |= LEDS_ALL_LEDS; + DDRC |= LEDS_ALL_LEDS; + PORTC &= ~LEDS_ALL_LEDS; #else - DDRD |= LEDS_ALL_LEDS; - PORTD |= LEDS_ALL_LEDS; + DDRD |= LEDS_ALL_LEDS; + PORTD &= ~LEDS_ALL_LEDS; #endif } @@ -118,27 +130,27 @@ static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask) { #if (BOARD == BOARD_USB2AX) - PORTC &= ~LEDMask; + PORTC |= LEDMask; #else - PORTD &= ~LEDMask; + PORTD |= LEDMask; #endif } static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask) { #if (BOARD == BOARD_USB2AX) - PORTC |= LEDMask; + PORTC &= ~LEDMask; #else - PORTD |= LEDMask; + PORTD &= ~LEDMask; #endif } static inline void LEDs_SetAllLEDs(const uint8_t LEDMask) { #if (BOARD == BOARD_USB2AX) - PORTC = ((PORTC | LEDS_ALL_LEDS) & ~LEDMask); + PORTC = ((PORTC & ~LEDS_ALL_LEDS) | LEDMask); #else - PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask); + PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask); #endif } @@ -146,18 +158,18 @@ const uint8_t ActiveMask) { #if (BOARD == BOARD_USB2AX) - PORTC = ((PORTC | LEDMask) & ~ActiveMask); + PORTC = ((PORTC & ~LEDMask) | ActiveMask); #else - PORTD = ((PORTD | LEDMask) & ~ActiveMask); + PORTD = ((PORTD & ~LEDMask) | ActiveMask); #endif } static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { #if (BOARD == BOARD_USB2AX) - PORTC ^= LEDMask; + PINC = LEDMask; #else - PORTD ^= LEDMask; + PIND = LEDMask; #endif } @@ -165,9 +177,9 @@ static inline uint8_t LEDs_GetLEDs(void) { #if (BOARD == BOARD_USB2AX) - return (~PORTC & LEDS_ALL_LEDS); + return (PORTC & LEDS_ALL_LEDS); #else - return (~PORTD & LEDS_ALL_LEDS); + return (PORTD & LEDS_ALL_LEDS); #endif } #endif diff --git a/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h b/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h index d03918ced..111f7ecf5 100644 --- a/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h b/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h index f838983c7..2d68caf02 100644 --- a/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h @@ -42,6 +42,11 @@ * * Board specific LED driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102). * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorLowPORTD.4
+ * * @{ */ @@ -109,7 +114,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h b/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h index 3180725b8..9399f4fa8 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel USBKEY. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTE.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h index 5b71d7d88..32f7ff905 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h @@ -42,6 +42,12 @@ * * Board specific Dataflash driver header for the Atmel USBKEY board. * + * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB642D (8MB)PORTE.0SPI0
DATAFLASH_CHIP2AT45DB642D (8MB)PORTE.1SPI0
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h b/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h index 8b6935b39..4136f7959 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel USBKEY. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
PORTB.6PORTB.7PORTE.4PORTE.5PORTB.5
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h b/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h index 4ca7691af..25a90a74e 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel USBKEY. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1RedBicolor Indicator 1LowPORTD.4
LEDS_LED2GreenBicolor Indicator 1LowPORTD.5
LEDS_LED3RedBicolor Indicator 2LowPORTD.6
LEDS_LED4GreenBicolor Indicator 2LowPORTD.7
+ * * @{ */ @@ -118,7 +126,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTD ^= LEDMask; + PIND = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h b/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h index 6a6d78c1d..7313db229 100644 --- a/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/). * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1HWB ButtonLowPORTD.7
+ * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h b/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h index 0fcbf0746..96acd6212 100644 --- a/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h @@ -42,6 +42,13 @@ * * Board specific LED driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/). * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1RedBicolor Indicator 1HighPORTB.6
LEDS_LED2GreenBicolor Indicator 1HighPORTB.7
LEDS_LED3RedTarget PowerHighPORTB.5
+ * * @{ */ @@ -115,7 +122,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= LEDMask; + PINB = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h index c9bdbdc3a..9647cc1a3 100644 --- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h @@ -51,6 +51,18 @@ * * Board specific Dataflash driver header for the Atmel XPLAIN. * + * Revision 1 Boards: + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB041D (512KB)PORTB.5SPI0
+ * + * Other Board Revisions: + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB642D (8MB)PORTB.5SPI0
+ * * @{ */ @@ -59,6 +71,7 @@ /* Includes: */ #include "../../../../Common/Common.h" + #include "../../../Misc/AT45DB642D.h" #include "../../../Peripheral/SPI.h" diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h b/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h index 938154878..879d656c1 100644 --- a/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h +++ b/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h @@ -49,6 +49,11 @@ * * Board specific LED driver header for the Atmel XPLAIN. * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenGeneral IndicatorLowPORTB.6
+ * * @{ */ @@ -116,7 +121,7 @@ static inline void LEDs_ToggleLEDs(const uint8_t LEDMask) { - PORTB ^= LEDMask; + PINB = LEDMask; } static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT; diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index bf8524685..c3d6c0d00 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -143,6 +143,10 @@ #include "AVR8/MICROPENDOUS/Buttons.h" #elif (BOARD == BOARD_B1_XPLAINED) #include "XMEGA/B1_XPLAINED/Buttons.h" + #elif (BOARD == BOARD_OLIMEX32U4) + #include "AVR8/OLIMEX32U4/Buttons.h" + #elif (BOARD == BOARD_OLIMEXT32U4) + #include "AVR8/OLIMEXT32U4/Buttons.h" #else #include "Board/Buttons.h" #endif diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 46589c28d..f6f9d82ff 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -80,11 +80,11 @@ * // Turn on each of the four LEDs in turn * LEDs_SetAllLEDs(LEDS_LED1); * Delay_MS(500); - * LEDs_SetAllLEDs(LEDS_LED1); + * LEDs_SetAllLEDs(LEDS_LED2); * Delay_MS(500); - * LEDs_SetAllLEDs(LEDS_LED1); + * LEDs_SetAllLEDs(LEDS_LED3); * Delay_MS(500); - * LEDs_SetAllLEDs(LEDS_LED1); + * LEDs_SetAllLEDs(LEDS_LED4); * Delay_MS(500); * * // Turn on all LEDs @@ -185,6 +185,12 @@ #include "AVR8/MULTIO/LEDs.h" #elif (BOARD == BOARD_BIGMULTIO) #include "AVR8/BIGMULTIO/LEDs.h" + #elif (BOARD == BOARD_DUCE) + #include "AVR8/DUCE/LEDs.h" + #elif (BOARD == BOARD_OLIMEX32U4) + #include "AVR8/OLIMEX32U4/LEDs.h" + #elif (BOARD == BOARD_OLIMEXT32U4) + #include "AVR8/OLIMEXT32U4/LEDs.h" #else #include "Board/LEDs.h" #endif diff --git a/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h index e1b34b18d..a5a0fd62b 100644 --- a/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h +++ b/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h @@ -42,6 +42,13 @@ * * Board specific Buttons driver header for the Atmel EVK1100. * + * + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1SW0 ButtonLowGPIO88
BUTTONS_BUTTON2SW1 ButtonLowGPIO85
BUTTONS_BUTTON3SW2 ButtonLowGPIO82
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h b/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h index b9dbfbc00..256da60ee 100644 --- a/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h +++ b/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel EVK1100. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
GPIO25GPIO26GPIO28GPIO27GPIO20
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h index 43c3ecb47..4663baf21 100644 --- a/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h +++ b/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h @@ -42,6 +42,18 @@ * * Board specific LED driver header for the Atmel EVK1100. * + * + * + * + * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenLED0 LEDLowGPIO51
LEDS_LED2GreenLED1 LEDLowGPIO52
LEDS_LED3GreenLED2 LEDLowGPIO53
LEDS_LED4GreenLED3 LEDLowGPIO54
LEDS_LED5GreenLED4 LEDLowGPIO59
LEDS_LED6GreenLED5 LEDLowGPIO60
LEDS_LED7GreenLED6 LEDLowGPIO61
LEDS_LED8GreenLED7 LEDLowGPIO62
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h index 2e89af453..897147902 100644 --- a/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h +++ b/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h @@ -42,6 +42,12 @@ * * Board specific Buttons driver header for the Atmel EVK1101. * + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1SW0 ButtonLowGPIO34
BUTTONS_BUTTON2SW1 ButtonLowGPIO35
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h b/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h index 9983374c1..7850bfb15 100644 --- a/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h +++ b/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h @@ -42,6 +42,11 @@ * * Board specific joystick driver header for the Atmel EVK1101. * + * + * + * + *
Left Port PinUp Port PinRight Port PinDown Port PinPress Port Pin
GPIO38GPIO39GPIO41GPIO40GPIO13
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h index 43f3949d0..79a95b7a7 100644 --- a/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h +++ b/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel EVK1101. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenLED0 LEDLowGPIO7
LEDS_LED2GreenLED1 LEDLowGPIO8
LEDS_LED3GreenLED2 LEDLowGPIO21
LEDS_LED4GreenLED3 LEDLowGPIO22
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h b/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h index af8246d5f..d255c0ac0 100644 --- a/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h +++ b/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h @@ -42,6 +42,11 @@ * * Board specific Buttons driver header for the Atmel EVK1104. * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1SW0 ButtonLowGPIO42
+ * * @{ */ diff --git a/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h b/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h index 1f5863b04..e1caf1938 100644 --- a/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h +++ b/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h @@ -42,6 +42,14 @@ * * Board specific LED driver header for the Atmel EVK1104. * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1GreenLED0 LEDLowGPIO67
LEDS_LED2GreenLED1 LEDLowGPIO101
LEDS_LED3GreenLED2 LEDLowGPIO102
LEDS_LED4GreenLED3 LEDLowGPIO105
+ * * @{ */ diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h index d4e208407..8146ee36b 100644 --- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h +++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h @@ -42,6 +42,13 @@ * * Board specific Buttons driver header for the Atmel XMEGA A3BU Xplained. * + * + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1SW0 ButtonLowPORTE.5
BUTTONS_BUTTON2SW1 ButtonLowPORTF.1
BUTTONS_BUTTON3SW2 ButtonLowPORTF.2
+ * * @{ */ diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h index abc8d85d1..672d4eb07 100644 --- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h +++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h @@ -42,6 +42,11 @@ * * Board specific Dataflash driver header for the Atmel XMEGA B1 Xplained board. * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB642D (8MB)PORTF.4USARTD0 (In SPI Mode)
+ * * @{ */ @@ -71,10 +76,10 @@ #define DATAFLASH_TOTALCHIPS 1 /** Mask for no dataflash chip selected. */ - #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK + #define DATAFLASH_NO_CHIP 0 /** Mask for the first dataflash chip selected. */ - #define DATAFLASH_CHIP1 0 + #define DATAFLASH_CHIP1 (1 << 4) /** Internal main memory page size for the board's dataflash ICs. */ #define DATAFLASH_PAGE_SIZE 1024 @@ -88,8 +93,10 @@ */ static inline void Dataflash_Init(void) { - DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; - DATAFLASH_CHIPCS_PORT.OUTSET = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; + + PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm; } /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. @@ -143,7 +150,8 @@ static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; static inline void Dataflash_SelectChip(const uint8_t ChipMask) { - DATAFLASH_CHIPCS_PORT.OUT = ((DATAFLASH_CHIPCS_PORT.OUT & ~DATAFLASH_CHIPCS_MASK) | ChipMask); + DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.OUTSET = ChipMask; } /** Deselects the current dataflash chip, so that no dataflash is selected. */ diff --git a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h index 6212c9aed..b47199bbb 100644 --- a/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h +++ b/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h @@ -42,6 +42,12 @@ * * Board specific LED driver header for the Atmel XMEGA A3BU Xplained. * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1YellowLED0 LEDLowPORTR.0
LEDS_LED2YellowLED1 LEDLowPORTR.1
+ * * @{ */ diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h index 2a08ed565..0e098326e 100644 --- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h +++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h @@ -42,6 +42,14 @@ * * Board specific Buttons driver header for the Atmel XMEGA B1 Xplained. * + * + * + * + * + * + * + *
NameInfoActive LevelPort Pin
BUTTONS_BUTTON1Touch CS0 ButtonLowPORTE.0
BUTTONS_BUTTON2Touch CS1 ButtonLowPORTE.1
BUTTONS_BUTTON3Touch CS2 ButtonLowPORTE.2
BUTTONS_BUTTON4Touch CS3 ButtonLowPORTE.3
+ * * @{ */ diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h index f1e6da5f0..d7ad64a5c 100644 --- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h +++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h @@ -42,6 +42,11 @@ * * Board specific Dataflash driver header for the Atmel XMEGA A3BU Xplained board. * + * + * + * + *
NameInfoSelect PinSPI Port
DATAFLASH_CHIP1AT45DB642D (8MB)PORTD.2USARTC0 (In SPI Mode, Remapped)
+ * * @{ */ @@ -71,10 +76,10 @@ #define DATAFLASH_TOTALCHIPS 1 /** Mask for no dataflash chip selected. */ - #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK + #define DATAFLASH_NO_CHIP 0 /** Mask for the first dataflash chip selected. */ - #define DATAFLASH_CHIP1 0 + #define DATAFLASH_CHIP1 (1 << 2) /** Internal main memory page size for the board's dataflash ICs. */ #define DATAFLASH_PAGE_SIZE 1024 @@ -88,10 +93,12 @@ */ static inline void Dataflash_Init(void) { - DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; - DATAFLASH_CHIPCS_PORT.OUTSET = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK; + + PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm; - PORTE.REMAP |= PORT_USART0_bm; + PORTC.REMAP |= PORT_USART0_bm; } /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash. @@ -103,7 +110,7 @@ static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) { - return SerialSPI_TransferByte(&USARTE0, Byte); + return SerialSPI_TransferByte(&USARTC0, Byte); } /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash. @@ -113,7 +120,7 @@ static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; static inline void Dataflash_SendByte(const uint8_t Byte) { - SerialSPI_SendByte(&USARTE0, Byte); + SerialSPI_SendByte(&USARTC0, Byte); } /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash. @@ -123,7 +130,7 @@ static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; static inline uint8_t Dataflash_ReceiveByte(void) { - return SerialSPI_ReceiveByte(&USARTE0); + return SerialSPI_ReceiveByte(&USARTC0); } /** Determines the currently selected dataflash chip. @@ -145,7 +152,8 @@ static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE; static inline void Dataflash_SelectChip(const uint8_t ChipMask) { - DATAFLASH_CHIPCS_PORT.OUT = ((DATAFLASH_CHIPCS_PORT.OUT & ~DATAFLASH_CHIPCS_MASK) | ChipMask); + DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK; + DATAFLASH_CHIPCS_PORT.OUTSET = (ChipMask & DATAFLASH_CHIPCS_MASK); } /** Deselects the current dataflash chip, so that no dataflash is selected. */ diff --git a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h index 184978727..54a678eef 100644 --- a/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h +++ b/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h @@ -42,6 +42,15 @@ * * Board specific LED driver header for the Atmel XMEGA B1 Xplained. * + * + * + * + * + * + * + * + *
NameColorInfoActive LevelPort Pin
LEDS_LED1YellowLED0 LEDHighPORTB.4
LEDS_LED2YellowLED1 LEDHighPORTB.5
LEDS_LED3YellowLED2 LEDHighPORTB.6
LEDS_LED4YellowLED3 LEDHighPORTB.7
LEDS_LED5GreenUSB LEDLowPORTE.4
+ * * @{ */ diff --git a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h index 0126630ac..562aaecfd 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h @@ -176,9 +176,7 @@ */ static inline void SerialSPI_SendByte(const uint8_t DataByte) { - UDR1 = DataByte; - while (!(UCSR1A & (1 << TXC1))); - UCSR1A = (1 << TXC1); + SerialSPI_TransferByte(DataByte); } /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response @@ -188,10 +186,7 @@ */ static inline uint8_t SerialSPI_ReceiveByte(void) { - UDR1 = 0; - while (!(UCSR1A & (1 << TXC1))); - UCSR1A = (1 << TXC1); - return UDR1; + return SerialSPI_TransferByte(0); } /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h index 6f8251f60..a0e9e3370 100644 --- a/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h +++ b/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h @@ -52,7 +52,7 @@ * * \code * // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud - * SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000); + * SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000); * * // Send several bytes, ignoring the returned data * SerialSPI_SendByte(&USARTD0, 0x01); @@ -177,9 +177,7 @@ static inline void SerialSPI_SendByte(USART_t* const USART, const uint8_t DataByte) { - USART->DATA = DataByte; - while (!(USART->STATUS & USART_TXCIF_bm)); - USART->STATUS = USART_TXCIF_bm; + SerialSPI_TransferByte(USART, DataByte); } /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response @@ -191,10 +189,7 @@ */ static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART) { - USART->DATA = 0; - while (!(USART->STATUS & USART_TXCIF_bm)); - USART->STATUS = USART_TXCIF_bm; - return USART->DATA; + return SerialSPI_TransferByte(USART, 0); } /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h b/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h index 60b0908f3..25b80b7d4 100644 --- a/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h +++ b/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h @@ -84,8 +84,20 @@ * addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address. * * \param[in] channel MIDI channel number to address. + * + * \return Constructed MIDI channel ID. */ #define MIDI_CHANNEL(channel) ((channel) - 1) + + /** Constructs a MIDI event ID from a given MIDI command and a virtual MIDI cable index. This can then be + * used to create and decode \ref MIDI_EventPacket_t MIDI event packets. + * + * \param[in] virtualcable Index of the virtual MIDI cable the event relates to + * \param[in] command MIDI command to send through the virtual MIDI cable + * + * \return Constructed MIDI event ID. + */ + #define MIDI_EVENT(virtualcable, command) ((virtualcable << 4) | (command >> 4)) /* Enums: */ /** Enum for the possible MIDI jack types in a MIDI device jack descriptor. */ @@ -290,8 +302,7 @@ */ typedef struct { - unsigned Command : 4; /**< Upper nibble of the MIDI command being sent or received in the event packet. */ - unsigned CableNumber : 4; /**< Virtual cable number of the event being sent or received in the given MIDI interface. */ + uint8_t Event; /**< MIDI event type, constructed with the \ref MIDI_EVENT() macro. */ uint8_t Data1; /**< First byte of data in the MIDI event. */ uint8_t Data2; /**< Second byte of data in the MIDI event. */ diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c index 15fcd588d..ad79e9b2b 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c @@ -48,15 +48,16 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi if ((InterfaceIndex != AudioInterfaceInfo->Config.ControlInterfaceNumber) && (InterfaceIndex != AudioInterfaceInfo->Config.StreamingInterfaceNumber)) - - return; + { + return; + } } else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { - uint8_t EndpointIndex = (USB_ControlRequest.wIndex & 0xFF); + uint8_t EndpointAddress = (USB_ControlRequest.wIndex & 0xFF); - if ((EndpointIndex != (ENDPOINT_DIR_IN | AudioInterfaceInfo->Config.DataINEndpointNumber)) && - (EndpointIndex != (ENDPOINT_DIR_OUT | AudioInterfaceInfo->Config.DataOUTEndpointNumber))) + if ((EndpointAddress != AudioInterfaceInfo->Config.DataINEndpoint.Address) && + (EndpointAddress != AudioInterfaceInfo->Config.DataOUTEndpoint.Address)) { return; } @@ -88,7 +89,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi case AUDIO_REQ_SetMinimum: case AUDIO_REQ_SetMaximum: case AUDIO_REQ_SetResolution: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)) + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { uint8_t EndpointProperty = USB_ControlRequest.bRequest; uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex; @@ -108,7 +109,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi EndpointControl, &ValueLength, Value); } } - else if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) + else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE) { uint8_t Property = USB_ControlRequest.bRequest; uint8_t Entity = (USB_ControlRequest.wIndex >> 8); @@ -134,7 +135,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi case AUDIO_REQ_GetMinimum: case AUDIO_REQ_GetMaximum: case AUDIO_REQ_GetResolution: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT)) + if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT) { uint8_t EndpointProperty = USB_ControlRequest.bRequest; uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex; @@ -150,7 +151,7 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi Endpoint_ClearOUT(); } } - else if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) + else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE) { uint8_t Property = USB_ControlRequest.bRequest; uint8_t Entity = (USB_ControlRequest.wIndex >> 8); @@ -174,39 +175,15 @@ void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const Audi bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo) { memset(&AudioInterfaceInfo->State, 0x00, sizeof(AudioInterfaceInfo->State)); + + AudioInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_ISOCHRONOUS; - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (EndpointNum == AudioInterfaceInfo->Config.DataINEndpointNumber) - { - Size = AudioInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - } - else if (EndpointNum == AudioInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = AudioInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h index 239126607..a8bfc7833 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h @@ -86,19 +86,8 @@ * structure controls. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming Audio Streaming data, if available - * (zero if unused). - */ - uint16_t DataINEndpointSize; /**< Size in bytes of the incoming Audio Streaming data endpoint, if available - * (zero if unused). - */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing Audio Streaming data, if available - * (zero if unused). - */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing Audio Streaming data endpoint, if available - * (zero if unused). - */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -226,7 +215,7 @@ if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled)) return false; - Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataOUTEndpoint.Address); return Endpoint_IsOUTReceived(); } @@ -247,7 +236,7 @@ if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled)) return false; - Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_IsINReady(); } @@ -341,7 +330,7 @@ { Endpoint_Write_8(Sample); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } @@ -360,7 +349,7 @@ { Endpoint_Write_16_LE(Sample); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } @@ -380,7 +369,7 @@ Endpoint_Write_16_LE(Sample); Endpoint_Write_8(Sample >> 16); - if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpointSize) + if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size) Endpoint_ClearIN(); } diff --git a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c index 5b5343860..ff0f9bb55 100644 --- a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c @@ -69,8 +69,12 @@ void CDC_Device_ProcessControlRequest(USB_ClassInfo_CDC_Device_t* const CDCInter { Endpoint_ClearSETUP(); - while (!(Endpoint_IsOUTReceived())); - + while (!(Endpoint_IsOUTReceived())) + { + if (USB_DeviceState == DEVICE_STATE_Unattached) + return; + } + CDCInterfaceInfo->State.LineEncoding.BaudRateBPS = Endpoint_Read_32_LE(); CDCInterfaceInfo->State.LineEncoding.CharFormat = Endpoint_Read_8(); CDCInterfaceInfo->State.LineEncoding.ParityType = Endpoint_Read_8(); @@ -112,45 +116,18 @@ bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfac { memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + CDCInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + CDCInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + CDCInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT; - if (EndpointNum == CDCInterfaceInfo->Config.DataINEndpointNumber) - { - Size = CDCInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == CDCInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = CDCInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else if (EndpointNum == CDCInterfaceInfo->Config.NotificationEndpointNumber) - { - Size = CDCInterfaceInfo->Config.NotificationEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = CDCInterfaceInfo->Config.NotificationEndpointDoubleBank; - } - else - { - continue; - } + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.NotificationEndpoint, 1))) + return false; return true; } @@ -171,7 +148,7 @@ uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_Write_Stream_LE(String, strlen(String), NULL); } @@ -182,7 +159,7 @@ uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); return Endpoint_Write_Stream_LE(Buffer, Length, NULL); } @@ -192,7 +169,7 @@ uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo, if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return ENDPOINT_RWSTREAM_DeviceDisconnected; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); if (!(Endpoint_IsReadWriteAllowed())) { @@ -215,7 +192,7 @@ uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) uint8_t ErrorCode; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address); if (!(Endpoint_BytesInEndpoint())) return ENDPOINT_READYWAIT_NoError; @@ -240,7 +217,7 @@ uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterface if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return 0; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address); if (Endpoint_IsOUTReceived()) { @@ -267,7 +244,7 @@ int16_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInf int16_t ReceivedByte = -1; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address); if (Endpoint_IsOUTReceived()) { @@ -286,7 +263,7 @@ void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDC if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS)) return; - Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.NotificationEndpointNumber); + Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.NotificationEndpoint.Address); USB_Request_Header_t Notification = (USB_Request_Header_t) { diff --git a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h index cc0dd1b15..508c234d7 100644 --- a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h @@ -99,19 +99,11 @@ { struct { - uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */ - - uint8_t DataINEndpointNumber; /**< Endpoint number of the CDC interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the CDC interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the CDC interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the CDC interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the CDC interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the CDC interface's OUT data endpoint should use double banking. */ - - uint8_t NotificationEndpointNumber; /**< Endpoint number of the CDC interface's IN notification endpoint, if used. */ - uint16_t NotificationEndpointSize; /**< Size in bytes of the CDC interface's IN notification endpoint, if used. */ - bool NotificationEndpointDoubleBank; /**< Indicates if the CDC interface's notification endpoint should use double banking. */ + uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */ + + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ diff --git a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c index 5c8d878e7..e4b565327 100644 --- a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c @@ -141,13 +141,11 @@ bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* const HIDInterfac HIDInterfaceInfo->State.UsingReportProtocol = true; HIDInterfaceInfo->State.IdleCount = 500; - if (!(Endpoint_ConfigureEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber, EP_TYPE_INTERRUPT, - ENDPOINT_DIR_IN, HIDInterfaceInfo->Config.ReportINEndpointSize, - HIDInterfaceInfo->Config.ReportINEndpointDoubleBank ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } + HIDInterfaceInfo->Config.ReportINEndpoint.Type = EP_TYPE_INTERRUPT; + if (!(Endpoint_ConfigureEndpointTable(&HIDInterfaceInfo->Config.ReportINEndpoint, 1))) + return false; + return true; } @@ -159,7 +157,7 @@ void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) if (HIDInterfaceInfo->State.PrevFrameNum == USB_Device_GetFrameNumber()) return; - Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber); + Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address); if (Endpoint_IsReadWriteAllowed()) { @@ -184,7 +182,7 @@ void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) { HIDInterfaceInfo->State.IdleMSRemaining = HIDInterfaceInfo->State.IdleCount; - Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpointNumber); + Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address); if (ReportID) Endpoint_Write_8(ReportID); diff --git a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h index a6361c6b0..e358dec75 100644 --- a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h @@ -85,9 +85,7 @@ { uint8_t InterfaceNumber; /**< Interface number of the HID interface within the device. */ - uint8_t ReportINEndpointNumber; /**< Endpoint number of the HID interface's IN report endpoint. */ - uint16_t ReportINEndpointSize; /**< Size in bytes of the HID interface's IN report endpoint. */ - bool ReportINEndpointDoubleBank; /**< Indicates if the HID interface's IN report endpoint should use double banking. */ + USB_Endpoint_Table_t ReportINEndpoint; /**< Data IN HID report endpoint configuration table. */ void* PrevReportINBuffer; /**< Pointer to a buffer where the previously created HID input report can be * stored by the driver, for comparison purposes to detect report changes that diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c index 9f0506e56..c9553a413 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c @@ -41,38 +41,14 @@ bool MIDI_Device_ConfigureEndpoints(USB_ClassInfo_MIDI_Device_t* const MIDIInter { memset(&MIDIInterfaceInfo->State, 0x00, sizeof(MIDIInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; - - if (EndpointNum == MIDIInterfaceInfo->Config.DataINEndpointNumber) - { - Size = MIDIInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == MIDIInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = MIDIInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + MIDIInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + MIDIInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + + if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataINEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } @@ -95,7 +71,7 @@ uint8_t MIDI_Device_SendEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInter uint8_t ErrorCode; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address); if ((ErrorCode = Endpoint_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != ENDPOINT_RWSTREAM_NoError) return ErrorCode; @@ -113,7 +89,7 @@ uint8_t MIDI_Device_Flush(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) uint8_t ErrorCode; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address); if (Endpoint_BytesInEndpoint()) { @@ -132,7 +108,7 @@ bool MIDI_Device_ReceiveEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInter if (USB_DeviceState != DEVICE_STATE_Configured) return false; - Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataOUTEndpoint.Address); if (!(Endpoint_IsReadWriteAllowed())) return false; diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h index 4fe49af1f..2703600ea 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h @@ -81,13 +81,8 @@ { uint8_t StreamingInterfaceNumber; /**< Index of the Audio Streaming interface within the device this structure controls. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming MIDI IN data, if available (zero if unused). */ - uint16_t DataINEndpointSize; /**< Size in bytes of the incoming MIDI IN data endpoint, if available (zero if unused). */ - bool DataINEndpointDoubleBank; /**< Indicates if the MIDI interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing MIDI OUT data, if available (zero if unused). */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing MIDI OUT data endpoint, if available (zero if unused). */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the MIDI interface's OUT data endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ diff --git a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c index 6294a0a94..153ebbc89 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c @@ -75,38 +75,14 @@ bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { memset(&MSInterfaceInfo->State, 0x00, sizeof(MSInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; + MSInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + MSInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; - if (EndpointNum == MSInterfaceInfo->Config.DataINEndpointNumber) - { - Size = MSInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == MSInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = MSInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else - { - continue; - } + if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataINEndpoint, 1))) + return false; - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; return true; } @@ -116,14 +92,14 @@ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); - if (Endpoint_IsReadWriteAllowed()) + if (Endpoint_IsOUTReceived()) { if (MS_Device_ReadInCommandBlock(MSInterfaceInfo)) { if (MSInterfaceInfo->State.CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN) - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); bool SCSICommandResult = CALLBACK_MS_Device_SCSICommandReceived(MSInterfaceInfo); @@ -141,13 +117,13 @@ void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) if (MSInterfaceInfo->State.IsMassStoreReset) { - Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); - Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); + Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); @@ -159,8 +135,8 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte { uint16_t BytesProcessed; - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); - + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); + BytesProcessed = 0; while (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock, (sizeof(MS_CommandBlockWrapper_t) - 16), &BytesProcessed) == @@ -175,9 +151,9 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte (MSInterfaceInfo->State.CommandBlock.Flags & 0x1F) || (MSInterfaceInfo->State.CommandBlock.SCSICommandLength == 0) || (MSInterfaceInfo->State.CommandBlock.SCSICommandLength > 16)) - { + { Endpoint_StallTransaction(); - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); Endpoint_StallTransaction(); return false; @@ -199,7 +175,7 @@ static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInte static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address); while (Endpoint_IsStalled()) { @@ -211,7 +187,7 @@ static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInt return; } - Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address); while (Endpoint_IsStalled()) { diff --git a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h index c2d536ce2..6b490eca1 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h @@ -81,13 +81,8 @@ { uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the Mass Storage interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the Mass Storage interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the Mass Storage interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the Mass Storage interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the Mass Storage interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the Mass Storage interface's OUT data endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section diff --git a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c index f78a5abf2..e5aa40cd0 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c +++ b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c @@ -115,45 +115,18 @@ bool RNDIS_Device_ConfigureEndpoints(USB_ClassInfo_RNDIS_Device_t* const RNDISIn { memset(&RNDISInterfaceInfo->State, 0x00, sizeof(RNDISInterfaceInfo->State)); - for (uint8_t EndpointNum = 1; EndpointNum < ENDPOINT_TOTAL_ENDPOINTS; EndpointNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Direction; - bool DoubleBanked; - - if (EndpointNum == RNDISInterfaceInfo->Config.DataINEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.DataINEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataINEndpointDoubleBank; - } - else if (EndpointNum == RNDISInterfaceInfo->Config.DataOUTEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.DataOUTEndpointSize; - Direction = ENDPOINT_DIR_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataOUTEndpointDoubleBank; - } - else if (EndpointNum == RNDISInterfaceInfo->Config.NotificationEndpointNumber) - { - Size = RNDISInterfaceInfo->Config.NotificationEndpointSize; - Direction = ENDPOINT_DIR_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = RNDISInterfaceInfo->Config.NotificationEndpointDoubleBank; - } - else - { - continue; - } - - if (!(Endpoint_ConfigureEndpoint(EndpointNum, Type, Direction, Size, - DoubleBanked ? ENDPOINT_BANK_DOUBLE : ENDPOINT_BANK_SINGLE))) - { - return false; - } - } + RNDISInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK; + RNDISInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK; + RNDISInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataINEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataOUTEndpoint, 1))) + return false; + + if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.NotificationEndpoint, 1))) + return false; return true; } @@ -163,7 +136,7 @@ void RNDIS_Device_USBTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo if (USB_DeviceState != DEVICE_STATE_Configured) return; - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.NotificationEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.NotificationEndpoint.Address); if (Endpoint_IsINReady() && RNDISInterfaceInfo->State.ResponseReady) { @@ -454,7 +427,7 @@ bool RNDIS_Device_IsPacketReceived(USB_ClassInfo_RNDIS_Device_t* const RNDISInte return false; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address); return Endpoint_IsOUTReceived(); } @@ -468,7 +441,7 @@ uint8_t RNDIS_Device_ReadPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfa return ENDPOINT_RWSTREAM_DeviceDisconnected; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address); *PacketLength = 0; @@ -505,7 +478,7 @@ uint8_t RNDIS_Device_SendPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfa return ENDPOINT_RWSTREAM_DeviceDisconnected; } - Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataINEndpointNumber); + Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataINEndpoint.Address); if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError) return ErrorCode; diff --git a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h index ccd20e38e..33b807da9 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h @@ -81,17 +81,9 @@ { uint8_t ControlInterfaceNumber; /**< Interface number of the RNDIS control interface within the device. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the RNDIS interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the RNDIS interface's IN data endpoint. */ - bool DataINEndpointDoubleBank; /**< Indicates if the RNDIS interface's IN data endpoint should use double banking. */ - - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the RNDIS interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the RNDIS interface's OUT data endpoint. */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the RNDIS interface's OUT data endpoint should use double banking. */ - - uint8_t NotificationEndpointNumber; /**< Endpoint number of the RNDIS interface's IN notification endpoint, if used. */ - uint16_t NotificationEndpointSize; /**< Size in bytes of the RNDIS interface's IN notification endpoint, if used. */ - bool NotificationEndpointDoubleBank; /**< Indicates if the RNDIS interface's notification endpoint should use double banking. */ + USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */ + USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */ + USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */ char* AdapterVendorDescription; /**< String description of the adapter vendor. */ MAC_Address_t AdapterMACAddress; /**< MAC address of the adapter. */ diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c index eb4c2530d..7c564e012 100644 --- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c @@ -89,45 +89,19 @@ uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == AOAInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = AOAInterfaceInfo->Config.DataINPipeDoubleBank; - - AOAInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == AOAInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = AOAInterfaceInfo->Config.DataOUTPipeDoubleBank; - - AOAInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return AOA_ENUMERROR_PipeConfigurationFailed; - } - } + AOAInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + AOAInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + AOAInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + AOAInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + AOAInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + AOAInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataOUTPipe, 1))) + return false; AOAInterfaceInfo->State.IsActive = true; AOAInterfaceInfo->State.InterfaceNumber = AOAInterface->InterfaceNumber; @@ -260,7 +234,7 @@ uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL); @@ -277,7 +251,7 @@ uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL); @@ -294,7 +268,7 @@ uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -316,7 +290,7 @@ uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) return 0; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -348,7 +322,7 @@ int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) int16_t ReceivedByte = -1; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -372,7 +346,7 @@ uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_BytesInPipe())) diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h index 0ec44e715..678feda45 100644 --- a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h @@ -85,11 +85,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the AOA interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the AOA interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the AOA interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the AOA interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ char* PropertyStrings[AOA_STRING_TOTAL_STRINGS]; /**< Android Accessory property strings, sent to identify the accessory when the * Android device is switched into Open Accessory mode. */ @@ -103,9 +100,6 @@ * Configured state. */ uint8_t InterfaceNumber; /**< Interface index of the AOA interface within the attached device. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the AOA interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the AOA interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * may be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. diff --git a/LUFA/Drivers/USB/Class/Host/AudioClassHost.c b/LUFA/Drivers/USB/Class/Host/AudioClassHost.c index e5591ec1d..12783a6a0 100644 --- a/LUFA/Drivers/USB/Class/Host/AudioClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/AudioClassHost.c @@ -51,8 +51,8 @@ uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfa if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration) return AUDIO_ENUMERROR_InvalidConfigDescriptor; - while ((AudioInterfaceInfo->Config.DataINPipeNumber && !(DataINEndpoint)) || - (AudioInterfaceInfo->Config.DataOUTPipeNumber && !(DataOUTEndpoint))) + while ((AudioInterfaceInfo->Config.DataINPipe.Address && !(DataINEndpoint)) || + (AudioInterfaceInfo->Config.DataOUTPipe.Address && !(DataOUTEndpoint))) { if (!(AudioControlInterface) || USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, @@ -93,45 +93,21 @@ uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfa DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == AudioInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - - AudioInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == AudioInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_ISOCHRONOUS; - DoubleBanked = true; - - AudioInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return AUDIO_ENUMERROR_PipeConfigurationFailed; - } - } + AudioInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + AudioInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + AudioInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataINPipe.Banks = 2; + + AudioInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + AudioInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + AudioInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_ISOCHRONOUS; + AudioInterfaceInfo->Config.DataOUTPipe.Banks = 2; + + if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataOUTPipe, 1))) + return false; AudioInterfaceInfo->State.ControlInterfaceNumber = AudioControlInterface->InterfaceNumber; AudioInterfaceInfo->State.StreamingInterfaceNumber = AudioStreamingInterface->InterfaceNumber; diff --git a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h index a6e425d5f..2d39aa9ca 100644 --- a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h @@ -79,14 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Audio interface's IN data pipe. If this interface should not - * bind to an IN endpoint, this may be set to 0 to disable audio input streaming for - * this driver instance. - */ - uint8_t DataOUTPipeNumber; /**< Pipe number of the Audio interface's OUT data pipe. If this interface should not - * bind to an OUT endpoint, this may be set to 0 to disable audio output streaming for - * this driver instance. - */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -100,9 +94,6 @@ uint8_t StreamingInterfaceNumber; /**< Interface index of the Audio Streaming interface within the attached device. */ uint8_t EnabledStreamingAltIndex; /**< Alternative setting index of the Audio Streaming interface when the stream is enabled. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the Audio interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Audio interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * may be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. @@ -201,7 +192,7 @@ bool SampleReceived = false; - Pipe_SelectPipe(AudioInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(AudioInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); SampleReceived = Pipe_IsINReceived(); Pipe_Freeze(); @@ -226,7 +217,7 @@ if ((USB_HostState != HOST_STATE_Configured) || !(AudioInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(AudioInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(AudioInterfaceInfo->Config.DataOUTPipe.Address); return Pipe_IsOUTReady(); } diff --git a/LUFA/Drivers/USB/Class/Host/CDCClassHost.c b/LUFA/Drivers/USB/Class/Host/CDCClassHost.c index 63df6b0c5..8c79e9c22 100644 --- a/LUFA/Drivers/USB/Class/Host/CDCClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/CDCClassHost.c @@ -99,62 +99,26 @@ uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == CDCInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - CDCInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == CDCInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = CDCInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - CDCInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == CDCInterfaceInfo->Config.NotificationPipeNumber) - { - Size = le16_to_cpu(NotificationEndpoint->EndpointSize); - EndpointAddress = NotificationEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = CDCInterfaceInfo->Config.NotificationPipeDoubleBank; - InterruptPeriod = NotificationEndpoint->PollingIntervalMS; - - CDCInterfaceInfo->State.NotificationPipeSize = NotificationEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return CDC_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + CDCInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + CDCInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + CDCInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + CDCInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + CDCInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize); + CDCInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress; + CDCInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataOUTPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.NotificationPipe, 1))) + return false; CDCInterfaceInfo->State.ControlInterfaceNumber = CDCControlInterface->InterfaceNumber; CDCInterfaceInfo->State.ControlLineStates.HostToDevice = (CDC_CONTROL_LINE_OUT_RTS | CDC_CONTROL_LINE_OUT_DTR); @@ -231,7 +195,7 @@ void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive)) return; - Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -321,7 +285,7 @@ uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL); @@ -338,7 +302,7 @@ uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL); @@ -355,7 +319,7 @@ uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -377,7 +341,7 @@ uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive)) return 0; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -409,7 +373,7 @@ int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) int16_t ReceivedByte = -1; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -433,7 +397,7 @@ uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_BytesInPipe())) diff --git a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h index 5a8df2414..4d79ed951 100644 --- a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h @@ -81,14 +81,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the CDC interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the CDC interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the CDC interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the CDC interface's OUT data pipe should use double banking. */ - - uint8_t NotificationPipeNumber; /**< Pipe number of the CDC interface's IN notification endpoint, if used. */ - bool NotificationPipeDoubleBank; /**< Indicates if the CDC interface's notification pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -100,10 +95,6 @@ */ uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the CDC interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the CDC interface's OUT data pipe. */ - uint16_t NotificationPipeSize; /**< Size in bytes of the CDC interface's IN notification pipe, if used. */ - struct { uint16_t HostToDevice; /**< Control line states from the host to device, as a set of \c CDC_CONTROL_LINE_OUT_* diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.c b/LUFA/Drivers/USB/Class/Host/HIDClassHost.c index f51bdf74f..dad6a5afc 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.c @@ -94,55 +94,19 @@ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == HIDInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = HIDInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = DataINEndpoint->PollingIntervalMS; - - HIDInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == HIDInterfaceInfo->Config.DataOUTPipeNumber) - { - if (DataOUTEndpoint == NULL) - continue; - - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = HIDInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = DataOUTEndpoint->PollingIntervalMS; - - HIDInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - HIDInterfaceInfo->State.DeviceUsesOUTPipe = true; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return HID_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + HIDInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + HIDInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + HIDInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_INTERRUPT; + + HIDInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + HIDInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + HIDInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataOUTPipe, 1))) + return false; HIDInterfaceInfo->State.InterfaceNumber = HIDInterface->InterfaceNumber; HIDInterfaceInfo->State.HIDReportSize = LE16_TO_CPU(HIDDescriptor->HIDReportLength); @@ -227,7 +191,7 @@ uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); uint16_t ReportSize; @@ -277,7 +241,7 @@ uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo { uint8_t ErrorCode; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (ReportID) @@ -320,7 +284,7 @@ bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) bool ReportReceived; - Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); ReportReceived = Pipe_IsINReceived(); diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h index 7bdaad18b..882cc31df 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h @@ -83,11 +83,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the HID interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the HID interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the HID interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the HID interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ uint8_t HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific * boot subclass protocol is required, a protocol value from the @@ -112,9 +109,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the HID interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the HID interface's OUT data pipe. */ - bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot * Protocol when enabled via \ref HID_Host_SetBootProtocol(). */ diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c index 5aadbcc7f..1300577fc 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c @@ -78,45 +78,19 @@ uint8_t MIDI_Host_ConfigurePipes(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceI DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == MIDIInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataINPipeDoubleBank; - - MIDIInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == MIDIInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MIDIInterfaceInfo->Config.DataOUTPipeDoubleBank; - - MIDIInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return MIDI_ENUMERROR_PipeConfigurationFailed; - } - } + MIDIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + MIDIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + MIDIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + MIDIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + MIDIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + MIDIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataOUTPipe, 1))) + return false; MIDIInterfaceInfo->State.InterfaceNumber = MIDIInterface->InterfaceNumber; MIDIInterfaceInfo->State.IsActive = true; @@ -181,7 +155,7 @@ uint8_t MIDI_Host_Flush(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address); if (Pipe_BytesInPipe()) { @@ -202,7 +176,7 @@ uint8_t MIDI_Host_SendEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterface uint8_t ErrorCode; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address); if ((ErrorCode = Pipe_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != PIPE_RWSTREAM_NoError) return ErrorCode; @@ -218,18 +192,27 @@ bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterface { if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive)) return HOST_SENDCONTROL_DeviceDisconnected; + + bool DataReady = false; - Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipeNumber); - - if (!(Pipe_IsReadWriteAllowed())) - return false; + Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipe.Address); + Pipe_Unfreeze(); - Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL); - - if (!(Pipe_IsReadWriteAllowed())) - Pipe_ClearIN(); + if (Pipe_IsINReceived()) + { + if (Pipe_BytesInPipe()) + { + Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL); + DataReady = true; + } - return true; + if (!(Pipe_BytesInPipe())) + Pipe_ClearIN(); + } + + Pipe_Freeze(); + + return DataReady; } #endif diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h index e934ddacb..b9e861143 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h @@ -79,11 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the MIDI interface's streaming IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the MIDI interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the MIDI interface's streaming OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the MIDI interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -94,9 +91,6 @@ * Configured state. */ uint8_t InterfaceNumber; /**< Interface index of the MIDI interface within the attached device. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the MIDI Streaming Data interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the MIDI Streaming Data interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * may be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. diff --git a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c index 24b4edc76..f145881fd 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c @@ -78,45 +78,19 @@ uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == MSInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataINPipeDoubleBank; - - MSInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == MSInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = MSInterfaceInfo->Config.DataOUTPipeDoubleBank; - - MSInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return MS_ENUMERROR_PipeConfigurationFailed; - } - } + MSInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + MSInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + MSInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + MSInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + MSInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + MSInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataOUTPipe, 1))) + return false; MSInterfaceInfo->State.InterfaceNumber = MassStorageInterface->InterfaceNumber; MSInterfaceInfo->State.IsActive = true; @@ -178,7 +152,7 @@ static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInf SCSICommandBlock->Signature = CPU_TO_LE32(MS_CBW_SIGNATURE); SCSICommandBlock->Tag = cpu_to_le32(MSInterfaceInfo->State.TransactionTag); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t), @@ -212,7 +186,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte uint16_t TimeoutMSRem = MS_COMMAND_DATA_TIMEOUT_MS; uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); while (!(Pipe_IsINReceived())) @@ -228,7 +202,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte } Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -238,7 +212,7 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte } Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -251,10 +225,10 @@ static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInte return PIPE_RWSTREAM_DeviceDisconnected; }; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Freeze(); - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Freeze(); return PIPE_RWSTREAM_NoError; @@ -275,7 +249,7 @@ static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfac return ErrorCode; } - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) @@ -285,7 +259,7 @@ static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfac } else { - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError) @@ -313,7 +287,7 @@ static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterf if ((ErrorCode = MS_Host_WaitForDataReceived(MSInterfaceInfo)) != PIPE_RWSTREAM_NoError) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t), @@ -349,12 +323,12 @@ uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; - Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address); if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful) return ErrorCode; diff --git a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h index 25d7e1e5e..a8763dd5b 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h @@ -83,11 +83,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Mass Storage interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Mass Storage interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Mass Storage interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Mass Storage interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -99,9 +96,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the Mass Storage interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Mass Storage interface's OUT data pipe. */ - uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets. */ } State; /**< State data for the USB class interface within the device. All elements in this section * may be set to initial values, but may also be ignored to default to sane values when diff --git a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c index 379ccb01c..dd33b115b 100644 --- a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c @@ -78,45 +78,19 @@ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceI DataOUTEndpoint = EndpointData; } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - bool DoubleBanked; - - if (PipeNum == PRNTInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = PRNTInterfaceInfo->Config.DataINPipeDoubleBank; - - PRNTInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == PRNTInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = PRNTInterfaceInfo->Config.DataOUTPipeDoubleBank; - - PRNTInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return PRNT_ENUMERROR_PipeConfigurationFailed; - } - } + PRNTInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + PRNTInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + PRNTInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + PRNTInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + PRNTInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + PRNTInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataOUTPipe, 1))) + return false; PRNTInterfaceInfo->State.InterfaceNumber = PrinterInterface->InterfaceNumber; PRNTInterfaceInfo->State.AlternateSetting = PrinterInterface->AlternateSetting; @@ -229,7 +203,7 @@ uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) uint8_t ErrorCode; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_BytesInPipe())) @@ -260,7 +234,7 @@ uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t ErrorCode; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -285,7 +259,7 @@ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL)) != PIPE_RWSTREAM_NoError) @@ -309,7 +283,7 @@ uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL)) != PIPE_RWSTREAM_NoError) @@ -329,7 +303,7 @@ uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceI if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive)) return 0; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) @@ -361,7 +335,7 @@ int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo int16_t ReceivedByte = -1; - Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsINReceived()) diff --git a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h index c8c997f74..25878276f 100644 --- a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h @@ -79,11 +79,8 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Printer interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Printer interface's OUT data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -95,9 +92,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Printer interface within the attached device. */ uint8_t AlternateSetting; /**< Alternate setting within the Printer Interface in the attached device. */ - - uint16_t DataINPipeSize; /**< Size in bytes of the Printer interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Printer interface's OUT data pipe. */ } State; /**< State data for the USB class interface within the device. All elements in this section * may be set to initial values, but may also be ignored to default to sane values when * the interface is enumerated. diff --git a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c index a03011d64..e457b5dff 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c @@ -101,62 +101,26 @@ uint8_t RNDIS_Host_ConfigurePipes(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfa } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == RNDISInterfaceInfo->Config.DataINPipeNumber) - { - Size = le16_to_cpu(DataINEndpoint->EndpointSize); - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - RNDISInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == RNDISInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = RNDISInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - RNDISInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == RNDISInterfaceInfo->Config.NotificationPipeNumber) - { - Size = le16_to_cpu(NotificationEndpoint->EndpointSize); - EndpointAddress = NotificationEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = RNDISInterfaceInfo->Config.NotificationPipeDoubleBank; - InterruptPeriod = NotificationEndpoint->PollingIntervalMS; - - RNDISInterfaceInfo->State.NotificationPipeSize = NotificationEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return CDC_ENUMERROR_PipeConfigurationFailed; - } + RNDISInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + RNDISInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + RNDISInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize); + RNDISInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress; + RNDISInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataOUTPipe, 1))) + return false; - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.NotificationPipe, 1))) + return false; RNDISInterfaceInfo->State.ControlInterfaceNumber = RNDISControlInterface->InterfaceNumber; RNDISInterfaceInfo->State.IsActive = true; @@ -419,7 +383,7 @@ bool RNDIS_Host_IsPacketReceived(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfac if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); PacketWaiting = Pipe_IsINReceived(); @@ -437,7 +401,7 @@ uint8_t RNDIS_Host_ReadPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceIn if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive)) return PIPE_READYWAIT_DeviceDisconnected; - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (!(Pipe_IsReadWriteAllowed())) @@ -491,7 +455,7 @@ uint8_t RNDIS_Host_SendPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceIn DeviceMessage.DataOffset = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t)); DeviceMessage.DataLength = cpu_to_le32(PacketLength); - Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t), diff --git a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h index 085bde22c..57087edf9 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h @@ -80,14 +80,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the RNDIS interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the RNDIS interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the RNDIS interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the RNDIS interface's OUT data pipe should use double banking. */ - - uint8_t NotificationPipeNumber; /**< Pipe number of the RNDIS interface's IN notification endpoint, if used. */ - bool NotificationPipeDoubleBank; /**< Indicates if the RNDIS interface's notification pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */ uint32_t HostMaxPacketSize; /**< Maximum size of a packet which can be buffered by the host. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section @@ -101,10 +96,6 @@ */ uint8_t ControlInterfaceNumber; /**< Interface index of the RNDIS control interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the RNDIS interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the RNDIS interface's OUT data pipe. */ - uint16_t NotificationPipeSize; /**< Size in bytes of the RNDIS interface's IN notification pipe, if used. */ - uint32_t DeviceMaxPacketSize; /**< Maximum size of a packet which can be buffered by the attached RNDIS device. */ uint32_t RequestID; /**< Request ID counter to give a unique ID for each command/response pair. */ diff --git a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c index 2b5514a28..5c18d7503 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c +++ b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c @@ -87,63 +87,27 @@ uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, } } - for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) - { - uint16_t Size; - uint8_t Type; - uint8_t Token; - uint8_t EndpointAddress; - uint8_t InterruptPeriod; - bool DoubleBanked; - - if (PipeNum == SIInterfaceInfo->Config.DataINPipeNumber) - { - Size = DataINEndpoint->EndpointSize; - EndpointAddress = DataINEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_BULK; - DoubleBanked = SIInterfaceInfo->Config.DataINPipeDoubleBank; - InterruptPeriod = 0; - - SIInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; - } - else if (PipeNum == SIInterfaceInfo->Config.DataOUTPipeNumber) - { - Size = DataOUTEndpoint->EndpointSize; - EndpointAddress = DataOUTEndpoint->EndpointAddress; - Token = PIPE_TOKEN_OUT; - Type = EP_TYPE_BULK; - DoubleBanked = SIInterfaceInfo->Config.DataOUTPipeDoubleBank; - InterruptPeriod = 0; - - SIInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; - } - else if (PipeNum == SIInterfaceInfo->Config.EventsPipeNumber) - { - Size = EventsEndpoint->EndpointSize; - EndpointAddress = EventsEndpoint->EndpointAddress; - Token = PIPE_TOKEN_IN; - Type = EP_TYPE_INTERRUPT; - DoubleBanked = SIInterfaceInfo->Config.EventsPipeDoubleBank; - InterruptPeriod = EventsEndpoint->PollingIntervalMS; - - SIInterfaceInfo->State.EventsPipeSize = EventsEndpoint->EndpointSize; - } - else - { - continue; - } - - if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, - DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) - { - return SI_ENUMERROR_PipeConfigurationFailed; - } - - if (InterruptPeriod) - Pipe_SetInterruptPeriod(InterruptPeriod); - } + SIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize); + SIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress; + SIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK; + + SIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + SIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress; + SIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK; + + SIInterfaceInfo->Config.EventsPipe.Size = le16_to_cpu(EventsEndpoint->EndpointSize); + SIInterfaceInfo->Config.EventsPipe.EndpointAddress = EventsEndpoint->EndpointAddress; + SIInterfaceInfo->Config.EventsPipe.Type = EP_TYPE_INTERRUPT; + + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataINPipe, 1))) + return false; + + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataOUTPipe, 1))) + return false; + if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.EventsPipe, 1))) + return false; + SIInterfaceInfo->State.InterfaceNumber = StillImageInterface->InterfaceNumber; SIInterfaceInfo->State.IsActive = true; @@ -204,7 +168,7 @@ uint8_t SI_Host_SendBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if (SIInterfaceInfo->State.IsSessionOpen) PIMAHeader->TransactionID = cpu_to_le32(SIInterfaceInfo->State.TransactionID++); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if ((ErrorCode = Pipe_Write_Stream_LE(PIMAHeader, PIMA_COMMAND_SIZE(0), NULL)) != PIPE_RWSTREAM_NoError) @@ -233,7 +197,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); while (!(Pipe_IsINReceived())) @@ -249,7 +213,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf } Pipe_Freeze(); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -259,7 +223,7 @@ uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf } Pipe_Freeze(); - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); if (Pipe_IsStalled()) @@ -298,7 +262,7 @@ uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes, NULL); @@ -318,7 +282,7 @@ uint8_t SI_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo, if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL); @@ -335,7 +299,7 @@ bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return false; - Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address); Pipe_Unfreeze(); if (Pipe_BytesInPipe()) @@ -354,7 +318,7 @@ uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInf if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive)) return PIPE_RWSTREAM_DeviceDisconnected; - Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipeNumber); + Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address); Pipe_Unfreeze(); ErrorCode = Pipe_Read_Stream_LE(PIMAHeader, sizeof(PIMA_Container_t), NULL); diff --git a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h index 4cda70d2e..be616b459 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h @@ -83,14 +83,9 @@ { struct { - uint8_t DataINPipeNumber; /**< Pipe number of the Still Image interface's IN data pipe. */ - bool DataINPipeDoubleBank; /**< Indicates if the Still Image interface's IN data pipe should use double banking. */ - - uint8_t DataOUTPipeNumber; /**< Pipe number of the Still Image interface's OUT data pipe. */ - bool DataOUTPipeDoubleBank; /**< Indicates if the Still Image interface's OUT data pipe should use double banking. */ - - uint8_t EventsPipeNumber; /**< Pipe number of the Still Image interface's IN events endpoint, if used. */ - bool EventsPipeDoubleBank; /**< Indicates if the Still Image interface's events data pipe should use double banking. */ + USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */ + USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */ + USB_Pipe_Table_t EventsPipe; /**< Event notification IN Pipe configuration table. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * must be set or the interface will fail to enumerate and operate correctly. */ @@ -102,10 +97,6 @@ */ uint8_t InterfaceNumber; /**< Interface index of the Still Image interface within the attached device. */ - uint16_t DataINPipeSize; /**< Size in bytes of the Still Image interface's IN data pipe. */ - uint16_t DataOUTPipeSize; /**< Size in bytes of the Still Image interface's OUT data pipe. */ - uint16_t EventsPipeSize; /**< Size in bytes of the Still Image interface's IN events pipe. */ - bool IsSessionOpen; /**< Indicates if a PIMA session is currently open with the attached device. */ uint32_t TransactionID; /**< Transaction ID for the next transaction to send to the device. */ } State; /**< State data for the USB class interface within the device. All elements in this section diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c index bcf904d99..4440b7631 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c @@ -42,6 +42,21 @@ uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; #endif +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + return false; + } + + return true; +} + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, const uint8_t UECFG0XData, const uint8_t UECFG1XData) diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h index 10f69a8fd..37ff220e3 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h @@ -89,35 +89,6 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) - /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) - #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) - - #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) - #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) - - #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 256, 2 - #define ENDPOINT_DETAILS_EP2 64, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 64, 2 - #define ENDPOINT_DETAILS_EP6 64, 2 - #else - #define ENDPOINT_DETAILS_MAXEP 5 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 64, 1 - #define ENDPOINT_DETAILS_EP2 64, 1 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #endif - /* Inline Functions: */ static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE; @@ -145,23 +116,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE (0 << EPBK0) - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE (1 << EPBK0) - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -169,30 +123,16 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different USB AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #else + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 5 + #endif #else #define ENDPOINT_TOTAL_ENDPOINTS 1 #endif @@ -222,28 +162,20 @@ }; /* Inline Functions: */ - /** Configures the specified endpoint number with the given endpoint type, direction, bank size - * and banking mode. Once configured, the endpoint may be read from or written to, depending - * on its direction. + /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware + * banks. Once configured, the endpoint may be read from or written to, depending on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints must have at least two banks. + * \param[in] Banks Number of banks to use for the endpoint being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints must be configured in * ascending order, or bank corruption will occur. @@ -261,19 +193,18 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - return Endpoint_ConfigureEndpoint_Prv(Number, ((Type << EPTYPE0) | (Direction ? (1 << EPDIR) : 0)), - ((1 << ALLOC) | Banks | Endpoint_BytesToEPSizeMask(Size))); + return Endpoint_ConfigureEndpoint_Prv((Address & ENDPOINT_EPNUM_MASK), + ((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)), + ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size))); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -294,9 +225,19 @@ #endif } + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Endpoint_GetEndpointDirection(void) + { + return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT; + } + /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ @@ -304,38 +245,36 @@ static inline uint8_t Endpoint_GetCurrentEndpoint(void) { #if !defined(CONTROL_ONLY_DEVICE) - return (UENUM & ENDPOINT_EPNUM_MASK); + return ((UENUM & ENDPOINT_EPNUM_MASK) | Endpoint_GetEndpointDirection()); #else return ENDPOINT_CONTROLEP; #endif } - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { #if !defined(CONTROL_ONLY_DEVICE) - UENUM = EndpointNumber; + UENUM = (Address & ENDPOINT_EPNUM_MASK); #endif } /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { - UERST = (1 << EndpointNumber); + UERST = (1 << (Address & ENDPOINT_EPNUM_MASK)); UERST = 0; } @@ -441,14 +380,14 @@ /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type * endpoints). * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. * * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) { - return ((Endpoint_GetEndpointInterrupts() & (1 << EndpointNumber)) ? true : false); + return ((Endpoint_GetEndpointInterrupts() & (1 << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); } /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. @@ -576,16 +515,6 @@ UECONX |= (1 << RSTDT); } - /** Determines the currently selected endpoint's direction. - * - * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. - */ - static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointDirection(void) - { - return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT; - } - /** Sets the direction of the currently selected endpoint. * * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. @@ -841,6 +770,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c index 3f27c7631..a1e0fd371 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c @@ -114,9 +114,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); break; case HOST_STATE_Powered_ConfigPipe: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; @@ -151,9 +149,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); break; case HOST_STATE_Default_PostReset: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - USB_Host_ControlPipeSize, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c index 5e68cc725..1ddffb51e 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c @@ -40,21 +40,43 @@ uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; -bool Pipe_ConfigurePipe(const uint8_t Number, +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks) { + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + #if defined(ORDERED_EP_CONFIG) Pipe_SelectPipe(Number); Pipe_EnablePipe(); UPCFG1X = 0; - UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); - UPCFG1X = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); + UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG1X = ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Pipe_BytesToEPSizeMask(Size)); Pipe_SetInfiniteINRequests(); @@ -71,7 +93,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number, if (PNum == Number) { - UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0)); + UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0)); UPCFG1XTemp = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size)); UPCFG2XTemp = 0; UPIENXTemp = 0; diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h index 86792bf22..1012fa060 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h @@ -124,38 +124,22 @@ /** \name Pipe Token Masks */ //@{ - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), * which will trigger a control request on the attached device when data is written to the pipe. */ #define PIPE_TOKEN_SETUP (0 << PTOKEN0) - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), * indicating that the pipe data will flow from device to host. */ #define PIPE_TOKEN_IN (1 << PTOKEN0) - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), * indicating that the pipe data will flow from host to device. */ #define PIPE_TOKEN_OUT (2 << PTOKEN0) //@} - /** \name Pipe Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have one single bank, which requires less USB FIFO memory but results in slower transfers as - * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. - */ - #define PIPE_BANK_SINGLE (0 << EPBK0) - - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have two banks, which requires more USB FIFO memory but results in faster transfers as one - * USB device (the AVR or the attached device) can access one bank while the other accesses the second - * bank. - */ - #define PIPE_BANK_DOUBLE (1 << EPBK0) - //@} - /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value * in the device descriptor of the attached device. */ @@ -203,36 +187,46 @@ return UPBCX; } + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (UPCFG0X & (1 << EPDIR)) ? PIPE_DIR_IN : PIPE_DIR_OUT; + } + /** Returns the pipe address of the currently selected pipe. This is typically used to save the - * currently selected pipe number so that it can be restored after another pipe has been manipulated. + * currently selected pipe address so that it can be restored after another pipe has been manipulated. * * \return Index of the currently selected pipe. */ static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetCurrentPipe(void) { - return (UPNUM & PIPE_PIPENUM_MASK); + return ((UPNUM & PIPE_PIPENUM_MASK) | Pipe_GetPipeDirection()); } - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be * indicated will operate on the currently selected pipe. * - * \param[in] PipeNumber Index of the pipe to select. + * \param[in] Address Address of the pipe to select. */ - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) { - UPNUM = PipeNumber; + UPNUM = (Address & PIPE_PIPENUM_MASK); } /** Resets the desired pipe, including the pipe banks and flags. * - * \param[in] PipeNumber Index of the pipe to reset. + * \param[in] Address Address of the pipe to reset. */ - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) { - UPRST = (1 << PipeNumber); + UPRST = (1 << (Address & PIPE_PIPENUM_MASK)); UPRST = 0; } @@ -326,8 +320,9 @@ static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetBoundEndpointAddress(void) { - return (((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK) | - ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_EPDIR_MASK : 0)); + uint8_t UPCFG0X_Temp = UPCFG0X; + + return (((UPCFG0X_Temp >> PEPNUM0) & PIPE_EPNUM_MASK) | ((UPCFG0X_Temp & PEPNUM1) ? ENDPOINT_DIR_OUT : ENDPOINT_DIR_IN)); } /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. @@ -351,17 +346,17 @@ return UPINT; } - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type * pipes). * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * \param[in] Address Address of the pipe whose interrupt flag should be tested. * * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. */ - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) { - return ((UPINT & (1 << PipeNumber)) ? true : false); + return ((UPINT & (1 << (Address & PIPE_PIPENUM_MASK))) ? true : false); } /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ @@ -810,8 +805,22 @@ extern uint8_t USB_Host_ControlPipeSize; /* Function Prototypes: */ - /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the - * attached device, bank size and banking mode. + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size + * and number of hardware banks. * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or @@ -819,25 +828,19 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. - * - * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low - * Speed USB devices - refer to the USB 2.0 specification. + * \param[in] Address Pipe address to configure. * - * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. - * All pipes (except Control type) are unidirectional - data may only be read from or - * written to the pipe bank based on its direction, not both. + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. * - * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to - * the USB device, or after they have been received from the USB device (depending on - * the pipe's data direction). The bank size must indicate the maximum packet size that - * the pipe can handle. + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. * - * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks - * uses more USB DPRAM, but offers better performance. Isochronous type pipes must - * have at least two banks. + * \param[in] Banks Number of banks to use for the pipe being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Pipes must be configured in ascending order, * or bank corruption will occur. @@ -855,10 +858,9 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - bool Pipe_ConfigurePipe(const uint8_t Number, + bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks); diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c index e31b88d5f..1f37dfd49 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c @@ -232,8 +232,7 @@ static void USB_Init_Device(void) #endif Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Clear(USB_INT_SUSPI); USB_INT_Enable(USB_INT_SUSPI); diff --git a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c index f63cf3eb9..e26c86f12 100644 --- a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c +++ b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c @@ -171,8 +171,7 @@ ISR(USB_GEN_vect, ISR_BLOCK) USB_INT_Enable(USB_INT_WAKEUPI); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); #if defined(INTERRUPT_CONTROL_ENDPOINT) USB_INT_Enable(USB_INT_RXSTPI); diff --git a/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/LUFA/Drivers/USB/Core/DeviceStandardReq.c index 61082cfbb..f5e1cca33 100644 --- a/LUFA/Drivers/USB/Core/DeviceStandardReq.c +++ b/LUFA/Drivers/USB/Core/DeviceStandardReq.c @@ -289,7 +289,6 @@ static void USB_Device_GetStatus(void) switch (USB_ControlRequest.bmRequestType) { - #if !defined(NO_DEVICE_SELF_POWER) || !defined(NO_DEVICE_REMOTE_WAKEUP) case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE): #if !defined(NO_DEVICE_SELF_POWER) if (USB_Device_CurrentlySelfPowered) @@ -301,17 +300,16 @@ static void USB_Device_GetStatus(void) CurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED; #endif break; - #endif - #if !defined(CONTROL_ONLY_DEVICE) case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT): + #if !defined(CONTROL_ONLY_DEVICE) Endpoint_SelectEndpoint((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK); CurrentStatus = Endpoint_IsStalled(); Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP); + #endif break; - #endif default: return; } diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h index 1fcc6b6f3..b349adfc9 100644 --- a/LUFA/Drivers/USB/Core/Endpoint.h +++ b/LUFA/Drivers/USB/Core/Endpoint.h @@ -87,6 +87,18 @@ #endif /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a endpoint table entry, used to configure endpoints in groups via + * \ref Endpoint_ConfigureEndpointTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the endpoint to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the endpoint bank, in bytes. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the endpoint. */ + } USB_Endpoint_Table_t; + /* Macros: */ /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's * numerical address in the device. diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h index bb56b8102..faa803b6d 100644 --- a/LUFA/Drivers/USB/Core/Pipe.h +++ b/LUFA/Drivers/USB/Core/Pipe.h @@ -97,6 +97,19 @@ #endif /* Public Interface - May be used in end-application: */ + /* Type Defines: */ + /** Type define for a pipe table entry, used to configure pipes in groups via + * \ref Pipe_ConfigurePipeTable(). + */ + typedef struct + { + uint8_t Address; /**< Address of the pipe to configure, or zero if the table entry is to be unused. */ + uint16_t Size; /**< Size of the pipe bank, in bytes. */ + uint8_t EndpointAddress; /** Address of the endpoint in the connected device. */ + uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */ + uint8_t Banks; /**< Number of hardware banks to use for the pipe. */ + } USB_Pipe_Table_t; + /* Macros: */ /** Pipe address for the default control pipe, which always resides in address 0. This is * defined for convenience to give more readable code when used with the pipe macros. @@ -113,11 +126,6 @@ */ #define PIPE_EPNUM_MASK 0x0F - /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's - * direction for comparing with the \c ENDPOINT_DIR_* masks. - */ - #define PIPE_EPDIR_MASK 0x80 - /* Architecture Includes: */ #if (ARCH == ARCH_AVR8) #include "AVR8/Pipe_AVR8.h" diff --git a/LUFA/Drivers/USB/Core/StdDescriptors.h b/LUFA/Drivers/USB/Core/StdDescriptors.h index cee2d5ec0..c46129c48 100644 --- a/LUFA/Drivers/USB/Core/StdDescriptors.h +++ b/LUFA/Drivers/USB/Core/StdDescriptors.h @@ -94,8 +94,8 @@ * * \param[in] x Version number to encode as a 16-bit little-endian number, as a floating point number. */ - #define VERSION_BCD(x) CPU_TO_LE16((((VERSION_TENS(x) << 4) | VERSION_ONES(x)) << 8) | \ - ((VERSION_TENTHS(x) << 4) | VERSION_HUNDREDTHS(x))) + #define VERSION_BCD(x) CPU_TO_LE16((VERSION_TENS(x) << 12) | (VERSION_ONES(x) << 8) | \ + (VERSION_TENTHS(x) << 4) | (VERSION_HUNDREDTHS(x) << 0) ) /** String language ID for the English language. Should be used in \ref USB_Descriptor_String_t descriptors * to indicate that the English language is supported by the device in its string descriptors. @@ -722,10 +722,10 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) /* Macros: */ - #define VERSION_TENS(x) (int)((x) / 10) - #define VERSION_ONES(x) (int)((x) - (10 * VERSION_TENS(x))) - #define VERSION_TENTHS(x) (int)(((x) - (int)(x)) * 10) - #define VERSION_HUNDREDTHS(x) (int)((((x) - (int)(x)) * 100) - (10 * VERSION_TENTHS(x))) + #define VERSION_TENS(x) (int)((int)(x) / 10) + #define VERSION_ONES(x) (int)((int)(x) % 10) + #define VERSION_TENTHS(x) (int)(((x * 1) - ((int)(x * 1))) * 10) + #define VERSION_HUNDREDTHS(x) (int)(((x * 10) - ((int)(x * 10))) * 10) #endif /* Disable C linkage for C++ Compilers: */ diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c index fc1b18a2e..c027585a6 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c @@ -45,6 +45,23 @@ uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE; volatile uint32_t USB_Endpoint_SelectedEndpoint = ENDPOINT_CONTROLEP; volatile uint8_t* USB_Endpoint_FIFOPos[ENDPOINT_TOTAL_ENDPOINTS]; +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number, const uint32_t UECFG0Data) { diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h index c919effa7..84801a13f 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h @@ -90,47 +90,6 @@ /* Private Interface - For use in library only: */ #if !defined(__DOXYGEN__) /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) _ENDPOINT_GET_MAXSIZE2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_MAXSIZE2(EPDetails) _ENDPOINT_GET_MAXSIZE3(EPDetails) - #define _ENDPOINT_GET_MAXSIZE3(MaxSize, Banks) (MaxSize) - - #define _ENDPOINT_GET_BANKS(EPIndex) _ENDPOINT_GET_BANKS2(ENDPOINT_DETAILS_EP ## EPIndex) - #define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails) - #define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks) - - #if defined(USB_SERIES_UC3A0_AVR32) || defined(USB_SERIES_UC3A1_AVR32) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 256, 2 - #define ENDPOINT_DETAILS_EP2 256, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 256, 2 - #define ENDPOINT_DETAILS_EP6 256, 2 - #elif defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) - #define ENDPOINT_DETAILS_MAXEP 8 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 512, 3 - #define ENDPOINT_DETAILS_EP2 512, 3 - #define ENDPOINT_DETAILS_EP3 512, 3 - #define ENDPOINT_DETAILS_EP4 512, 3 - #define ENDPOINT_DETAILS_EP5 512, 3 - #define ENDPOINT_DETAILS_EP6 512, 3 - #define ENDPOINT_DETAILS_EP7 512, 3 - #elif defined(USB_SERIES_UC3B0_AVR32) || defined(USB_SERIES_UC3B1_AVR32) - #define ENDPOINT_DETAILS_MAXEP 7 - - #define ENDPOINT_DETAILS_EP0 64, 1 - #define ENDPOINT_DETAILS_EP1 64, 2 - #define ENDPOINT_DETAILS_EP2 64, 2 - #define ENDPOINT_DETAILS_EP3 64, 2 - #define ENDPOINT_DETAILS_EP4 64, 2 - #define ENDPOINT_DETAILS_EP5 256, 2 - #define ENDPOINT_DETAILS_EP6 256, 2 - #endif - #define ENDPOINT_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL) /* Inline Functions: */ @@ -162,34 +121,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE AVR32_USBB_UECFG0_EPBK_SINGLE - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE AVR32_USBB_UECFG0_EPBK_DOUBLE - - #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have three banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the remaining banks. - * - * \note Not available on all AVR models. - */ - #define ENDPOINT_BANK_TRIPLE AVR32_USBB_UECFG0_EPBK_TRIPLE - #endif - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -197,30 +128,16 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP + #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) + #define ENDPOINT_TOTAL_ENDPOINTS 8 + #else + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 7 + #endif #else #define ENDPOINT_TOTAL_ENDPOINTS 1 #endif @@ -250,28 +167,21 @@ }; /* Inline Functions: */ - /** Configures the specified endpoint number with the given endpoint type, direction, bank size + /** Configures the specified endpoint address with the given endpoint type, direction, bank size * and banking mode. Once configured, the endpoint may be read from or written to, depending * on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints must have at least two banks. + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. * * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints must be configured in * ascending order, or bank corruption will occur. @@ -289,22 +199,21 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - return Endpoint_ConfigureEndpoint_Prv(Number, (AVR32_USBB_ALLOC_MASK | - ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) | - ((uint32_t)(Direction ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) | - ((uint32_t)Banks << AVR32_USBB_EPBK_OFFSET) | - Endpoint_BytesToEPSizeMask(Size)))); + return Endpoint_ConfigureEndpoint_Prv((Address & ENDPOINT_EPNUM_MASK), + (AVR32_USBB_ALLOC_MASK | + ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) | + ((uint32_t)(Address & ENDPOINT_DIR_IN) ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) | + ((uint32_t)Banks << AVR32_USBB_EPBK_OFFSET) | + Endpoint_BytesToEPSizeMask(Size))); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -319,41 +228,51 @@ return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].byct; } + /** Determines the currently selected endpoint's direction. + * + * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. + */ + static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointDirection(void) + { + return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT); + } + /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Endpoint_GetCurrentEndpoint(void) { - return USB_Endpoint_SelectedEndpoint; + return (USB_Endpoint_SelectedEndpoint | Endpoint_GetEndpointDirection()); } - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { - USB_Endpoint_SelectedEndpoint = EndpointNumber; + USB_Endpoint_SelectedEndpoint = (Address & ENDPOINT_EPNUM_MASK); } /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint number whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { + uint32_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + AVR32_USBB.uerst |= (AVR32_USBB_EPRST0_MASK << EndpointNumber); AVR32_USBB.uerst &= ~(AVR32_USBB_EPRST0_MASK << EndpointNumber); USB_Endpoint_FIFOPos[EndpointNumber] = &AVR32_USBB_SLAVE[EndpointNumber * ENDPOINT_HSB_ADDRESS_SPACE_SIZE]; @@ -452,8 +371,8 @@ * * \return Mask whose bits indicate which endpoints have interrupted. */ - static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointInterrupts(void) + static inline uint32_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint32_t Endpoint_GetEndpointInterrupts(void) { return ((AVR32_USBB.udint & (AVR32_USBB_EP6INT_MASK | AVR32_USBB_EP5INT_MASK | AVR32_USBB_EP4INT_MASK | AVR32_USBB_EP3INT_MASK | @@ -464,14 +383,14 @@ /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type * endpoints). * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. + * \param[in] Address Address of the endpoint whose interrupt flag should be tested. * * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) { - return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << EndpointNumber)) ? true : false); + return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << (Address & ENDPOINT_EPNUM_MASK))) ? true : false); } /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. @@ -596,16 +515,6 @@ (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rstdts = true; } - /** Determines the currently selected endpoint's direction. - * - * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask. - */ - static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint32_t Endpoint_GetEndpointDirection(void) - { - return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT); - } - /** Sets the direction of the currently selected endpoint. * * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask. @@ -837,6 +746,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/UC3/Host_UC3.c b/LUFA/Drivers/USB/Core/UC3/Host_UC3.c index 49d43f9b5..932381a14 100644 --- a/LUFA/Drivers/USB/Core/UC3/Host_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Host_UC3.c @@ -114,9 +114,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe); break; case HOST_STATE_Powered_ConfigPipe: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - PIPE_CONTROLPIPE_DEFAULT_SIZE, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; @@ -151,9 +149,7 @@ void USB_Host_ProcessNextHostState(void) HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset); break; case HOST_STATE_Default_PostReset: - if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, - PIPE_TOKEN_SETUP, ENDPOINT_CONTROLEP, - USB_Host_ControlPipeSize, PIPE_BANK_SINGLE))) + if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1))) { ErrorCode = HOST_ENUMERROR_PipeConfigError; SubErrorCode = 0; diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c index 4e77a28ff..787244b97 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c @@ -43,13 +43,35 @@ uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE; volatile uint32_t USB_Pipe_SelectedPipe = PIPE_CONTROLPIPE; volatile uint8_t* USB_Pipe_FIFOPos[PIPE_TOTAL_PIPES]; -bool Pipe_ConfigurePipe(const uint8_t Number, +bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks) { + uint8_t Number = (Address & PIPE_EPNUM_MASK); + uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT; + + if (Type == EP_TYPE_CONTROL) + Token = PIPE_TOKEN_SETUP; + USB_Pipe_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * 0x10000]; #if defined(ORDERED_EP_CONFIG) @@ -60,7 +82,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number, (&AVR32_USBB.upcfg0)[Number] = (AVR32_USBB_ALLOC_MASK | ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | - ((uint32_t)Banks << AVR32_USBB_PBK_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | Pipe_BytesToEPSizeMask(Size) | ((EndpointNumber & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); @@ -79,9 +101,9 @@ bool Pipe_ConfigurePipe(const uint8_t Number, UPCFG0Temp = (AVR32_USBB_ALLOC_MASK | ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) | ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) | - ((uint32_t)Banks << AVR32_USBB_PBK_OFFSET) | + ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) | Pipe_BytesToEPSizeMask(Size) | - ((EndpointNumber & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); + ((EndpointAddress & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET)); } else { diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h index f17fa5376..837afe8b8 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -131,49 +131,22 @@ /** \name Pipe Token Masks */ //@{ - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), * which will trigger a control request on the attached device when data is written to the pipe. */ #define PIPE_TOKEN_SETUP AVR32_USBB_UPCFG0_PTOKEN_SETUP - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), * indicating that the pipe data will flow from device to host. */ #define PIPE_TOKEN_IN AVR32_USBB_UPCFG0_PTOKEN_IN - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), * indicating that the pipe data will flow from host to device. */ #define PIPE_TOKEN_OUT AVR32_USBB_UPCFG0_PTOKEN_OUT //@} - /** \name Pipe Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have one single bank, which requires less USB FIFO memory but results in slower transfers as - * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. - */ - #define PIPE_BANK_SINGLE AVR32_USBB_UPCFG0_PBK_SINGLE - - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have two banks, which requires more USB FIFO memory but results in faster transfers as one - * USB device (the AVR or the attached device) can access one bank while the other accesses the second - * bank. - */ - #define PIPE_BANK_DOUBLE AVR32_USBB_UPCFG0_PBK_DOUBLE - - #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the - * pipe should have three banks, which requires more USB FIFO memory but results in faster transfers - * as one USB device (the AVR or the attached device) can access one bank while the other accesses the - * remaining banks. - * - * \note Not available on all AVR models. - */ - #define PIPE_BANK_TRIPLE AVR32_USBB_UPCFG0_PBK_TRIPLE - #endif - //@} - /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value * in the device descriptor of the attached device. */ @@ -224,6 +197,16 @@ return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].pbyct; } + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (((&AVR32_USBB.UPCFG0)[USB_Endpoint_SelectedEndpoint].ptoken == PIPE_TOKEN_OUT) ? PIPE_DIR_OUT : PIPE_DIR_IN); + } + /** Returns the pipe address of the currently selected pipe. This is typically used to save the * currently selected pipe number so that it can be restored after another pipe has been manipulated. * @@ -232,30 +215,32 @@ static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetCurrentPipe(void) { - return USB_Pipe_SelectedPipe; + return (USB_Pipe_SelectedPipe | Pipe_GetPipeDirection()); } - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be * indicated will operate on the currently selected pipe. * - * \param[in] PipeNumber Index of the pipe to select. + * \param[in] Address Address of the pipe to select. */ - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) { - USB_Pipe_SelectedPipe = PipeNumber; + USB_Pipe_SelectedPipe = (Address & PIPE_EPNUM_MASK); } /** Resets the desired pipe, including the pipe banks and flags. * - * \param[in] PipeNumber Index of the pipe to reset. + * \param[in] Address Index of the pipe to reset. */ - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) { + uint32_t PipeNumber = (Address & PIPE_EPNUM_MASK); + AVR32_USBB.uprst |= (AVR32_USBB_PRST0_MASK << PipeNumber); AVR32_USBB.uprst &= ~(AVR32_USBB_PRST0_MASK << PipeNumber); - USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + USB_Pipe_FIFOPos[PipeNumber] = &AVR32_USBB_SLAVE[PipeNumber * PIPE_HSB_ADDRESS_SPACE_SIZE]; } /** Enables the currently selected pipe so that data can be sent and received through it to and from @@ -349,7 +334,7 @@ static inline uint8_t Pipe_GetBoundEndpointAddress(void) { return ((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].pepnum | - ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_EPDIR_MASK : 0)); + ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_DIR_IN : PIPE_DIR_OUT)); } /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. @@ -376,17 +361,17 @@ AVR32_USBB_P0INT_MASK)) >> AVR32_USBB_P0INT_OFFSET); } - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type * pipes). * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * \param[in] Address Address of the pipe whose interrupt flag should be tested. * * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. */ - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) { - return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << PipeNumber)) ? true : false); + return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << (Address & PIPE_EPNUM_MASK))) ? true : false); } /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ @@ -821,8 +806,22 @@ extern uint8_t USB_Host_ControlPipeSize; /* Function Prototypes: */ - /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the - * attached device, bank size and banking mode. + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size + * and number of hardware banks. * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or @@ -830,25 +829,19 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. - * - * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low - * Speed USB devices - refer to the USB 2.0 specification. + * \param[in] Address Pipe address to configure. * - * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. - * All pipes (except Control type) are unidirectional - data may only be read from or - * written to the pipe bank based on its direction, not both. + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. * - * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to - * the USB device, or after they have been received from the USB device (depending on - * the pipe's data direction). The bank size must indicate the maximum packet size that - * the pipe can handle. + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. * - * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks - * uses more USB DPRAM, but offers better performance. Isochronous type pipes must - * have at least two banks. + * \param[in] Banks Number of banks to use for the pipe being configured. * * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes must be configured in ascending order, * or bank corruption will occur. @@ -867,10 +860,9 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - bool Pipe_ConfigurePipe(const uint8_t Number, + bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks); diff --git a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c index 95ca7d9aa..32772446e 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c @@ -191,8 +191,7 @@ static void USB_Init_Device(void) USB_INT_Enable(USB_INT_VBUSTI); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Clear(USB_INT_SUSPI); USB_INT_Enable(USB_INT_SUSPI); diff --git a/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c b/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c index d411a9305..a2a5c4a96 100644 --- a/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c +++ b/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c @@ -121,8 +121,7 @@ ISR(USB_GEN_vect) USB_Device_SetDeviceAddress(0); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); #if defined(INTERRUPT_CONTROL_ENDPOINT) USB_INT_Enable(USB_INT_RXSTPI); diff --git a/LUFA/Drivers/USB/Core/USBController.h b/LUFA/Drivers/USB/Core/USBController.h index a91e18c27..44a10e371 100644 --- a/LUFA/Drivers/USB/Core/USBController.h +++ b/LUFA/Drivers/USB/Core/USBController.h @@ -81,6 +81,24 @@ #define ENDPOINT_DIR_IN 0x80 //@} + /** \name Pipe Direction Masks */ + //@{ + /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's + * direction for comparing with the \c PIPE_DIR_* masks. + */ + #define PIPE_DIR_MASK 0x80 + + /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_OUT 0x00 + + /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with + * the index of the address within a device to obtain the full endpoint address. + */ + #define PIPE_DIR_IN 0x80 + //@} + /** \name Endpoint/Pipe Type Masks */ //@{ /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared diff --git a/LUFA/Drivers/USB/Core/USBMode.h b/LUFA/Drivers/USB/Core/USBMode.h index bc2f86dd5..f62c8c152 100644 --- a/LUFA/Drivers/USB/Core/USBMode.h +++ b/LUFA/Drivers/USB/Core/USBMode.h @@ -137,6 +137,16 @@ */ #define USB_SERIES_B3_XMEGA + /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller + * (i.e. ATXMEGA*C3) when defined. + */ + #define USB_SERIES_C3_XMEGA + + /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller + * (i.e. ATXMEGA*C4) when defined. + */ + #define USB_SERIES_C4_XMEGA + /** Indicates that the target microcontroller and compilation settings allow for the * target to be configured in USB Device mode when defined. */ @@ -219,6 +229,14 @@ #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__)) #define USB_SERIES_B3_XMEGA #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \ + defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \ + defined(__AVR_ATxmega384C3__)) + #define USB_SERIES_C3_XMEGA + #define USB_CAN_BE_DEVICE + #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__)) + #define USB_SERIES_C4_XMEGA + #define USB_CAN_BE_DEVICE #endif #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST)) diff --git a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h index 85be0f1bf..4d75cc2a2 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h @@ -92,10 +92,12 @@ */ #define USB_DEVICE_OPT_LOWSPEED (1 << 0) - /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the - * USB interface should be initialized in full speed (12Mb/s) mode. - */ - #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + #if (F_USB > 6000000) + /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the + * USB interface should be initialized in full speed (12Mb/s) mode. + */ + #define USB_DEVICE_OPT_FULLSPEED (0 << 0) + #endif //@} #if (!defined(NO_INTERNAL_SERIAL) || defined(__DOXYGEN__)) @@ -157,7 +159,7 @@ static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; static inline uint16_t USB_Device_GetFrameNumber(void) { - return USB_EndpointTable.FrameNum; + return ((USB_EndpointTable_t*)USB.EPPTR)->FrameNum; } #if !defined(NO_SOF_EVENTS) diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c index 98e35e59a..1aeb985f8 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c @@ -48,20 +48,36 @@ volatile uint8_t USB_Endpoint_SelectedEndpoint; volatile USB_EP_t* USB_Endpoint_SelectedHandle; volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; -bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Number, - const uint8_t Direction, +bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries) +{ + for (uint8_t i = 0; i < Entries; i++) + { + if (!(Table[i].Address)) + continue; + + if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks))) + { + return false; + } + } + + return true; +} + +bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, const uint8_t Config, const uint8_t Size) { - Endpoint_SelectEndpoint(Number | Direction); + Endpoint_SelectEndpoint(Address); USB_Endpoint_SelectedHandle->CTRL = 0; - USB_Endpoint_SelectedHandle->STATUS = (Direction == ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0; + USB_Endpoint_SelectedHandle->STATUS = (Address & ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0; USB_Endpoint_SelectedHandle->CTRL = Config; USB_Endpoint_SelectedHandle->CNT = 0; USB_Endpoint_SelectedHandle->DATAPTR = (intptr_t)USB_Endpoint_SelectedFIFO->Data; - USB_Endpoint_SelectedFIFO->Length = (Direction == ENDPOINT_DIR_IN) ? Size : 0; + USB_Endpoint_SelectedFIFO->Length = (Address & ENDPOINT_DIR_IN) ? Size : 0; USB_Endpoint_SelectedFIFO->Position = 0; return true; @@ -71,8 +87,8 @@ void Endpoint_ClearEndpoints(void) { for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++) { - USB_EndpointTable.Endpoints[EPNum].IN.CTRL = 0; - USB_EndpointTable.Endpoints[EPNum].OUT.CTRL = 0; + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].IN.CTRL = 0; + ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].OUT.CTRL = 0; } } diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h index 7828f308a..720b5f3b4 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h @@ -88,14 +88,20 @@ #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead. #endif - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) + /* Public Interface - May be used in end-application: */ /* Macros: */ - #define _ENDPOINT_GET_MAXSIZE(EPIndex) 1023 - #define _ENDPOINT_GET_BANKS(EPIndex) 2 - - #define ENDPOINT_DETAILS_MAXEP 16 + #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) + /** Total number of endpoints (including the default control endpoint at address 0) which may + * be used in the device. Different USB AVR models support different amounts of endpoints, + * this value reflects the maximum number of endpoints for the currently selected AVR model. + */ + #define ENDPOINT_TOTAL_ENDPOINTS 16 + #else + #define ENDPOINT_TOTAL_ENDPOINTS 1 + #endif + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) /* Type Defines: */ typedef struct { @@ -112,7 +118,7 @@ } Endpoint_FIFOPair_t; /* External Variables: */ - extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_DETAILS_MAXEP]; + extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS]; extern volatile uint8_t USB_Endpoint_SelectedEndpoint; extern volatile USB_EP_t* USB_Endpoint_SelectedHandle; extern volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO; @@ -135,8 +141,7 @@ } /* Function Prototypes: */ - bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Number, - const uint8_t Direction, + bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address, const uint8_t Config, const uint8_t Size); void Endpoint_ClearEndpoints(void); @@ -144,23 +149,6 @@ /* Public Interface - May be used in end-application: */ /* Macros: */ - /** \name Endpoint Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have one single bank, which requires less USB FIFO memory but results - * in slower transfers as only one USB device (the AVR or the host) can access the endpoint's - * bank at the one time. - */ - #define ENDPOINT_BANK_SINGLE 0 - - /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates - * that the endpoint should have two banks, which requires more USB FIFO memory but results - * in faster transfers as one USB device (the AVR or the host) can access one bank while the other - * accesses the second bank. - */ - #define ENDPOINT_BANK_DOUBLE USB_EP_PINGPONG_bm - //@} - #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__)) /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined. @@ -168,34 +156,6 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrieves the maximum bank size in bytes of a given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_MAX_SIZE(EPIndex) _ENDPOINT_GET_MAXSIZE(EPIndex) - - /** Retrieves the total number of banks supported by the given endpoint. - * - * \attention This macro will only work correctly on endpoint indexes that are compile-time constants - * defined by the preprocessor. - * - * \param[in] EPIndex Endpoint number, a value between 0 and (\ref ENDPOINT_TOTAL_ENDPOINTS - 1) - */ - #define ENDPOINT_BANKS_SUPPORTED(EPIndex) _ENDPOINT_GET_BANKS(EPIndex) - - #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__) - /** Total number of endpoints (including the default control endpoint at address 0) which may - * be used in the device. Different USB AVR models support different amounts of endpoints, - * this value reflects the maximum number of endpoints for the currently selected AVR model. - */ - #define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP - #else - #define ENDPOINT_TOTAL_ENDPOINTS 1 - #endif - /* Enums: */ /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function. * @@ -221,54 +181,47 @@ }; /* Inline Functions: */ - /** Selects the given endpoint number. If the address from the device descriptors is used, the - * value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint - * number (and discarding the endpoint direction bit). + /** Selects the given endpoint address. * - * Any endpoint operations which do not require the endpoint number to be indicated will operate on + * Any endpoint operations which do not require the endpoint address to be indicated will operate on * the currently selected endpoint. * - * \param[in] EndpointNumber Endpoint number to select. + * \param[in] Address Endpoint address to select. */ - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber); - static inline void Endpoint_SelectEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_SelectEndpoint(const uint8_t Address); + static inline void Endpoint_SelectEndpoint(const uint8_t Address) { - USB_Endpoint_SelectedEndpoint = EndpointNumber; + uint8_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK); + + USB_Endpoint_SelectedEndpoint = Address; - if (EndpointNumber & ENDPOINT_DIR_IN) + if (Address & ENDPOINT_DIR_IN) { - USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].IN; - USB_Endpoint_SelectedHandle = &USB_EndpointTable.Endpoints[EndpointNumber & ENDPOINT_EPNUM_MASK].IN; + USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].IN; + USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].IN; } else { - USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT; - USB_Endpoint_SelectedHandle = &USB_EndpointTable.Endpoints[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT; + USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].OUT; + USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].OUT; } } - /** Configures the specified endpoint number with the given endpoint type, direction, bank size + /** Configures the specified endpoint address with the given endpoint type, direction, bank size * and banking mode. Once configured, the endpoint may be read from or written to, depending * on its direction. * - * \param[in] Number Endpoint number to configure. This must be more than 0 and less than - * \ref ENDPOINT_TOTAL_ENDPOINTS. + * \param[in] Address Endpoint address to configure. * * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types * are available on Low Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] Direction Endpoint data direction, either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN. - * All endpoints (except Control type) are unidirectional - data may only be read - * from or written to the endpoint bank based on its direction, not both. - * * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted * to the USB host, or after they have been received from the USB host (depending on * the endpoint's data direction). The bank size must indicate the maximum packet size * that the endpoint can handle. * - * \param[in] Banks Number of banks to use for the endpoint being configured, an \c ENDPOINT_BANK_* mask. - * More banks uses more USB DPRAM, but offers better performance. Isochronous type - * endpoints must have at least two banks. + * \param[in] Banks Number of hardware banks to use for the endpoint being configured. * * \note The default control endpoint should not be manually configured by the user application, as * it is automatically configured by the library internally. @@ -278,21 +231,19 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) ATTR_ALWAYS_INLINE; - static inline bool Endpoint_ConfigureEndpoint(const uint8_t Number, + static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address, const uint8_t Type, - const uint8_t Direction, const uint16_t Size, const uint8_t Banks) { - uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | Banks | Endpoint_BytesToEPSizeMask(Size)); + uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | ((Banks > 1) ? USB_EP_PINGPONG_bm : 0) | Endpoint_BytesToEPSizeMask(Size)); // TODO - Fix once limitations are lifted - if ((Banks != ENDPOINT_BANK_SINGLE) || (Size > 64)) + if ((Banks > 1) || (Size > 64)) return false; switch (Type) @@ -309,9 +260,9 @@ } if (Type == EP_TYPE_CONTROL) - Endpoint_ConfigureEndpoint_PRV(Number, (Direction ^ ENDPOINT_DIR_IN), EPConfigMask, Size); + Endpoint_ConfigureEndpoint_PRV(Address ^ ENDPOINT_DIR_IN, EPConfigMask, Size); - return Endpoint_ConfigureEndpoint_PRV(Number, Direction, EPConfigMask, Size); + return Endpoint_ConfigureEndpoint_PRV(Address, EPConfigMask, Size); } /** Indicates the number of bytes currently stored in the current endpoint's selected bank. @@ -327,8 +278,8 @@ } /** Get the endpoint address of the currently selected endpoint. This is typically used to save - * the currently selected endpoint number so that it can be restored after another endpoint has - * been manipulated. + * the currently selected endpoint so that it can be restored after another endpoint has been + * manipulated. * * \return Index of the currently selected endpoint. */ @@ -341,15 +292,15 @@ /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's * data In and Out pointers to the bank's contents. * - * \param[in] EndpointNumber Endpoint number whose FIFO buffers are to be reset. + * \param[in] Address Endpoint address whose FIFO buffers are to be reset. */ - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) ATTR_ALWAYS_INLINE; - static inline void Endpoint_ResetEndpoint(const uint8_t EndpointNumber) + static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Endpoint_ResetEndpoint(const uint8_t Address) { - if (EndpointNumber & ENDPOINT_DIR_IN) - USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].IN.Position = 0; + if (Address & ENDPOINT_DIR_IN) + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].IN.Position = 0; else - USB_Endpoint_FIFOs[EndpointNumber & ENDPOINT_EPNUM_MASK].OUT.Position = 0; + USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].OUT.Position = 0; } /** Determines if the currently selected endpoint is enabled, but not necessarily configured. @@ -388,10 +339,7 @@ static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline bool Endpoint_IsReadWriteAllowed(void) { - if (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN) - return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length); - else - return (USB_Endpoint_SelectedFIFO->Position > 0); + return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length); } /** Determines if the currently selected endpoint is configured. @@ -404,32 +352,6 @@ return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) ? true : false); } - /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their - * interrupt duration has elapsed. Which endpoints have interrupted can be determined by - * masking the return value against (1 << {Endpoint Number}). - * - * \return Mask whose bits indicate which endpoints have interrupted. - */ - static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline uint8_t Endpoint_GetEndpointInterrupts(void) - { - return 0; // TODO - } - - /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type - * endpoints). - * - * \param[in] EndpointNumber Index of the endpoint whose interrupt flag should be tested. - * - * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise. - */ - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Endpoint_HasEndpointInterrupted(const uint8_t EndpointNumber) - { - (void)EndpointNumber; - return 0; // TODO - } - /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host. * * \ingroup Group_EndpointPacketManagement_XMEGA @@ -800,6 +722,20 @@ #endif /* Function Prototypes: */ + /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple + * endpoints at the same time. + * + * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the + * control endpoint. + * + * \param[in] Table Pointer to a table of endpoint descriptions. + * \param[in] Entries Number of entries in the endpoint table to configure. + * + * \return Boolean \c true if all endpoints configured successfully, \c false otherwise. + */ + bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table, + const uint8_t Entries); + /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically, * with respect to the data direction. This is a convenience function which can be used to * simplify user control request handling. diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c index 387e8e417..844ef650f 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c @@ -43,7 +43,8 @@ volatile uint8_t USB_CurrentMode = USB_MODE_None; volatile uint8_t USB_Options; #endif -USB_EndpointTable_t USB_EndpointTable ATTR_ALIGNED(4); +/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for 8-bit AVR-GCC */ +uint8_t USB_EndpointTable[sizeof(USB_EndpointTable_t) + 1]; void USB_Init( #if defined(USB_CAN_BE_BOTH) @@ -75,8 +76,9 @@ void USB_Init( USB.CAL1 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL1)); NVM.CMD = 0; - USB.EPPTR = (intptr_t)&USB_EndpointTable; - USB.CTRLA = (USB_STFRNUM_bm | USB_MAXEP_gm); + /* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for 8-bit AVR-GCC */ + USB.EPPTR = ((intptr_t)&USB_EndpointTable[1] & ~(1 << 0)); + USB.CTRLA = (USB_STFRNUM_bm | ((ENDPOINT_TOTAL_ENDPOINTS - 1) << USB_MAXEP_gp)); if ((USB_Options & USB_OPT_BUSEVENT_PRIHIGH) == USB_OPT_BUSEVENT_PRIHIGH) USB.INTCTRLA = (3 << USB_INTLVL_gp); @@ -103,13 +105,17 @@ void USB_Disable(void) void USB_ResetInterface(void) { + #if defined(USB_DEVICE_OPT_FULLSPEED) if (USB_Options & USB_DEVICE_OPT_LOWSPEED) CLK.USBCTRL = (((F_USB / 6000000) - 1) << CLK_USBPSDIV_gp); else CLK.USBCTRL = (((F_USB / 48000000) - 1) << CLK_USBPSDIV_gp); - + #else + CLK.USBCTRL = (((F_USB / 6000000) - 1) << CLK_USBPSDIV_gp); + #endif + if (USB_Options & USB_OPT_PLLCLKSRC) - CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm); + CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm); else CLK.USBCTRL |= (CLK_USBSRC_RC32M_gc | CLK_USBSEN_bm); @@ -172,8 +178,7 @@ static void USB_Init_Device(void) USB_Device_SetFullSpeed(); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); USB_INT_Enable(USB_INT_BUSEVENTI); diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h index 2f14f758a..25402e855 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h @@ -69,7 +69,7 @@ } ATTR_PACKED USB_EndpointTable_t; /* External Variables: */ - extern USB_EndpointTable_t USB_EndpointTable; + extern uint8_t USB_EndpointTable[]; #endif @@ -95,7 +95,7 @@ #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile. #endif - #if (F_USB % 6000000) + #if ((F_USB % 6000000) || (F_USB < 6000000)) #error Invalid F_USB specified. F_USB must be a multiple of 6MHz for USB Low Speed operation, and a multiple of 48MHz for Full Speed operation. #endif diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c index b0e52d06e..3554165c1 100644 --- a/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c +++ b/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c @@ -97,8 +97,7 @@ ISR(USB_BUSEVENT_vect) Endpoint_ClearEndpoints(); Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL, - ENDPOINT_DIR_OUT, USB_Device_ControlEndpointSize, - ENDPOINT_BANK_SINGLE); + USB_Device_ControlEndpointSize, 1); EVENT_USB_Device_Reset(); } diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h index 35b285c6d..c99c1d267 100644 --- a/LUFA/Drivers/USB/USB.h +++ b/LUFA/Drivers/USB/USB.h @@ -166,9 +166,12 @@ * .Config = * { * .StreamingInterfaceNumber = 1, - * - * .DataINEndpointNumber = 1, - * .DataINEndpointSize = 256, + * .DataINEndpoint = + * { + * .Address = (ENDPOINT_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, * }, * }; * \endcode @@ -262,11 +265,18 @@ * { * .Config = * { - * .DataINPipeNumber = 1, - * .DataINPipeDoubleBank = false, - * - * .DataOUTPipeNumber = 2, - * .DataOUTPipeDoubleBank = false, + * .DataINPipe = + * { + * .Address = (PIPE_DIR_IN | 1), + * .Size = 64, + * .Banks = 1, + * }, + * .DataOUTPipe = + * { + * .Address = (PIPE_DIR_OUT | 2), + * .Size = 64, + * .Banks = 1, + * }, * }, * }; * \endcode diff --git a/LUFA/Platform/XMEGA/ClockManagement.h b/LUFA/Platform/XMEGA/ClockManagement.h index dcde7dcdb..9b3b56244 100644 --- a/LUFA/Platform/XMEGA/ClockManagement.h +++ b/LUFA/Platform/XMEGA/ClockManagement.h @@ -53,13 +53,13 @@ * * void main(void) * { - * // Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it - * XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, 32000000); - * XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL, F_CPU); + * // Start the PLL to multiply the 2MHz RC oscillator to F_CPU and switch the CPU core to run from it + * XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + * XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); * - * // Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference + * // Start the 32MHz internal RC oscillator and start the DFLL to increase it to F_USB using the USB SOF as a reference * XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); - * XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, 48000000); + * XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); * } * \endcode * @@ -117,6 +117,26 @@ }; /* Inline Functions: */ + /** Write a value to a location protected by the XMEGA CCP protection mechanism. This function uses inline assembly to ensure that + * the protected address is written to within four clock cycles of the CCP key being written. + * + * \param[in] Address Address to write to, a memory address protected by the CCP mechanism + * \param[in] Value Value to write to the protected location + */ + static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value) ATTR_ALWAYS_INLINE; + static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value) + { + __asm__ __volatile__ ( + "out %0, __zero_reg__" "\n\t" /* Zero RAMPZ using fixed zero value register */ + "movw r30, %1" "\n\t" /* Copy address to Z register pair */ + "out %2, %3" "\n\t" /* Write key to CCP register */ + "st Z, %4" "\n\t" /* Indirectly write value to address */ + : /* No output operands */ + : /* Input operands: */ "m" (RAMPZ), "e" (Address), "m" (CCP), "r" (CCP_IOREG_gc), "r" (Value) + : /* Clobbered registers: */ "r30", "r31" + ); + } + /** Starts the external oscillator of the XMEGA microcontroller, with the given options. This routine blocks until * the oscillator is ready for use. * @@ -219,6 +239,9 @@ if (SourceFreq > Frequency) return false; + + if (MulFactor > 31) + return false; switch (Source) { @@ -355,8 +378,7 @@ uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask(); GlobalInterruptDisable(); - CCP = CCP_IOREG_gc; - CLK_CTRL = ClockSourceMask; + XMEGACLK_CCP_Write(&CLK.CTRL, ClockSourceMask); SetGlobalInterruptMask(CurrentGlobalInt); diff --git a/Maintenance/makefile b/Maintenance/makefile index 5cce2bf1c..8daf9c149 100644 --- a/Maintenance/makefile +++ b/Maintenance/makefile @@ -8,11 +8,12 @@ # Maintenance scripts not required by general LUFA users, used for project development purposes. + +# Path to the root of the LUFA tree LUFA_ROOT = ../ all: - # Update all Doxygen configuration files to the latest Doxygen version - force Markdown support to be disabled upgrade-doxygen: @echo Upgrading Doxygen.conf files... @@ -36,13 +37,6 @@ check-documentation-placeholders: fi; @echo Done. -# Test all generated documentation for any bad links -check-documentation-links: - @for html_file in `find $(LUFA_ROOT) -name *.html`; do \ - echo Checking $$html_file...; \ - cat $$html_file | grep -v "doxygen.org" | grep -v "fourwalledcubicle.com" | wget -nv --referer=www.lufa-lib.org --user-agent="lufa-link-check-script" -B $(dir $$html_file) --spider --force-html --input-file=-; \ - done; - # Validate the working branch - compile all documentation, demos/projects/examples and run build tests validate-branch: make -s -C $(LUFA_ROOT) doxygen diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c index 760193ab0..eaf04cb7a 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.c +++ b/Projects/AVRISP-MKII/AVRISP-MKII.c @@ -93,12 +93,10 @@ void EVENT_USB_Device_ConfigurationChanged(void) bool ConfigSuccess = true; /* Setup AVRISP Data Endpoint(s) */ - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #if defined(LIBUSB_DRIVER_COMPAT) - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #endif /* Indicate endpoint configuration success or failure */ @@ -114,7 +112,7 @@ void AVRISP_Task(void) V2Params_UpdateParamValues(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); /* Check to see if a V2 Protocol command has been received */ if (Endpoint_IsOUTReceived()) diff --git a/Projects/AVRISP-MKII/Descriptors.c b/Projects/AVRISP-MKII/Descriptors.c index 12f44f9e2..da57b7113 100644 --- a/Projects/AVRISP-MKII/Descriptors.c +++ b/Projects/AVRISP-MKII/Descriptors.c @@ -106,7 +106,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AVRISP_DATA_IN_EPNUM), + .EndpointAddress = AVRISP_DATA_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A @@ -116,7 +116,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AVRISP_DATA_OUT_EPNUM), + .EndpointAddress = AVRISP_DATA_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A diff --git a/Projects/AVRISP-MKII/Descriptors.h b/Projects/AVRISP-MKII/Descriptors.h index 5a994ba19..1b140f30d 100644 --- a/Projects/AVRISP-MKII/Descriptors.h +++ b/Projects/AVRISP-MKII/Descriptors.h @@ -42,18 +42,15 @@ #include /* Macros: */ - #if !defined(LIBUSB_DRIVER_COMPAT) - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 + #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) + /** Endpoint address of the AVRISP data OUT endpoint. */ + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 2 + /** Endpoint address of the AVRISP data IN endpoint. */ + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 2) #else - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 - - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 3 + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 3) #endif /** Size in bytes of the AVRISP data endpoint. */ diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c index f757ac143..445e088d2 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c @@ -57,7 +57,7 @@ void ISPProtocol_EnterISPMode(void) Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseStatus = STATUS_CMD_FAILED; @@ -115,7 +115,7 @@ void ISPProtocol_LeaveISPMode(void) Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); /* Perform pre-exit delay, release the target /RESET, disable the SPI bus and perform the post-exit delay */ @@ -154,7 +154,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData)) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -175,7 +175,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ProgrammingStatus = STATUS_CMD_OK; @@ -295,7 +295,7 @@ void ISPProtocol_ReadMemory(uint8_t V2Command) Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -368,7 +368,7 @@ void ISPProtocol_ChipErase(void) Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseStatus = STATUS_CMD_OK; @@ -404,7 +404,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ResponseBytes[4]; @@ -435,7 +435,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command) Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); /* Send the Fuse or Lock byte program commands as given by the host to the device */ @@ -463,7 +463,7 @@ void ISPProtocol_SPIMulti(void) Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_SPI_MULTI); diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c index f48581051..e7c43cd01 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.c +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c @@ -150,7 +150,7 @@ void V2Protocol_ProcessCommand(void) TCCR0B = 0; Endpoint_WaitUntilReady(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT); } @@ -169,7 +169,7 @@ static void V2Protocol_UnknownCommand(const uint8_t V2Command) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -181,7 +181,7 @@ static void V2Protocol_UnknownCommand(const uint8_t V2Command) static void V2Protocol_SignOn(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_SIGN_ON); @@ -197,7 +197,7 @@ static void V2Protocol_SignOn(void) static void V2Protocol_ResetProtection(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_RESET_PROTECTION); @@ -220,7 +220,7 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command) ParamValue = Endpoint_Read_8(); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(V2Command); @@ -254,7 +254,7 @@ static void V2Protocol_LoadAddress(void) Endpoint_Read_Stream_BE(&CurrentAddress, sizeof(CurrentAddress), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (CurrentAddress & (1UL << 31)) diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c index 1ec2b042c..2c5ac3f46 100644 --- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c +++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c @@ -37,7 +37,7 @@ #include "V2ProtocolParams.h" /* Non-Volatile Parameter Values for EEPROM storage */ -static uint8_t EEMEM EEPROM_Reset_Polarity = 0x00; +static uint8_t EEMEM EEPROM_Reset_Polarity = 0x01; /* Volatile Parameter Values for RAM storage */ static ParameterItem_t ParameterTable[] = diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c index 97154ea1e..b78247583 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c @@ -174,6 +174,8 @@ void XMEGANVM_DisablePDI(void) */ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand, uint32_t* const CRCDest) { + *CRCDest = 0; + /* Wait until the NVM controller is no longer busy */ if (!(XMEGANVM_WaitWhileNVMControllerBusy())) return false; diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c index d34273093..ad8cd530a 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c @@ -65,7 +65,7 @@ void XPROGProtocol_SetMode(void) Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol; @@ -112,7 +112,7 @@ void XPROGProtocol_Command(void) static void XPROGProtocol_EnterXPROGMode(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); bool NVMBusEnabled = false; @@ -134,7 +134,7 @@ static void XPROGProtocol_EnterXPROGMode(void) static void XPROGProtocol_LeaveXPROGMode(void) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI) @@ -169,7 +169,7 @@ static void XPROGProtocol_Erase(void) Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t EraseCommand; @@ -260,7 +260,7 @@ static void XPROGProtocol_WriteMemory(void) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI) @@ -342,7 +342,7 @@ static void XPROGProtocol_ReadMemory(void) ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint8_t ReadBuffer[256]; @@ -385,7 +385,7 @@ static void XPROGProtocol_ReadCRC(void) Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL); Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); uint32_t MemoryCRC; @@ -467,7 +467,7 @@ static void XPROGProtocol_SetParam(void) } Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPADDR); Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN); Endpoint_Write_8(CMD_XPROG); diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h index 523fc15bd..605653588 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h @@ -51,7 +51,7 @@ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) /* On the XPLAIN board, we only need PDI programming for the ATXMEGA128A1 - disable ISP to prevent hardware - damage. + damage and force-enable XPROG. */ #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c index b2f55520a..5ea94043f 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c @@ -78,7 +78,7 @@ void XPROGTarget_EnableTargetTPI(void) DDRD |= (1 << 5) | (1 << 3); DDRD &= ~(1 << 2); - /* Set up the synchronous USART for TINY communications - 8 data bits, even parity, 2 stop bits */ + /* Set up the synchronous USART for TPI communications - 8 data bits, even parity, 2 stop bits */ UBRR1 = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1); UCSR1B = (1 << TXEN1); UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1); diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c index 8d9ac5302..d68cee3c9 100644 --- a/Projects/Benito/Benito.c +++ b/Projects/Benito/Benito.c @@ -62,19 +62,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/Benito/Descriptors.c b/Projects/Benito/Descriptors.c index 86d8c4d0c..ea73dfe01 100644 --- a/Projects/Benito/Descriptors.c +++ b/Projects/Benito/Descriptors.c @@ -131,7 +131,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -157,20 +157,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/Benito/Descriptors.h b/Projects/Benito/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/Benito/Descriptors.h +++ b/Projects/Benito/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/HIDReportViewer/HIDReportViewer.c b/Projects/HIDReportViewer/HIDReportViewer.c index c0cc11f67..fa44c0843 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.c +++ b/Projects/HIDReportViewer/HIDReportViewer.c @@ -47,14 +47,17 @@ USB_ClassInfo_HID_Host_t Device_HID_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, .HIDInterfaceProtocol = HID_CSCP_NonBootProtocol, - .HIDParserData = &HIDReportInfo }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c index a3319e4ab..61176e607 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c +++ b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c @@ -120,20 +120,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h index 250fcf79b..c0e8f46d7 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h +++ b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 5 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -57,11 +57,11 @@ /** Size in bytes of the CDC data IN and OUT endpoints. */ #define CDC_TXRX_EPSIZE 16 - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c index bc70910e7..73bf5545a 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c +++ b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c @@ -40,15 +40,18 @@ USB_ClassInfo_MS_Device_t DiskDevice_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c index 1dafda43b..c93029c06 100644 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c +++ b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c @@ -39,11 +39,16 @@ USB_ClassInfo_MS_Host_t DiskHost_MS_Interface = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, }, }; diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c index cac0bd957..d953875a2 100644 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c +++ b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c @@ -5,7 +5,7 @@ #include "diskio.h" #include -#include +#include #include "../DataflashManager.h" #include "../../DiskHost.h" diff --git a/Projects/LEDNotifier/Descriptors.c b/Projects/LEDNotifier/Descriptors.c index e362857b4..d5bc6faed 100644 --- a/Projects/LEDNotifier/Descriptors.c +++ b/Projects/LEDNotifier/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,20 +169,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/LEDNotifier/Descriptors.h b/Projects/LEDNotifier/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/LEDNotifier/Descriptors.h +++ b/Projects/LEDNotifier/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/LEDNotifier/LEDNotifier.c b/Projects/LEDNotifier/LEDNotifier.c index 34f29e124..dd3a8ae3a 100644 --- a/Projects/LEDNotifier/LEDNotifier.c +++ b/Projects/LEDNotifier/LEDNotifier.c @@ -44,19 +44,25 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = { .Config = { - .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/MIDIToneGenerator/Descriptors.c b/Projects/MIDIToneGenerator/Descriptors.c index 9ad0e86a5..44db1eee5 100644 --- a/Projects/MIDIToneGenerator/Descriptors.c +++ b/Projects/MIDIToneGenerator/Descriptors.c @@ -199,10 +199,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MIDI_STREAM_OUT_EPNUM), + .EndpointAddress = MIDI_STREAM_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, @@ -224,10 +224,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MIDI_STREAM_IN_EPNUM), + .EndpointAddress = MIDI_STREAM_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MIDI_STREAM_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .Refresh = 0, diff --git a/Projects/MIDIToneGenerator/Descriptors.h b/Projects/MIDIToneGenerator/Descriptors.h index c5dc2e217..83844449d 100644 --- a/Projects/MIDIToneGenerator/Descriptors.h +++ b/Projects/MIDIToneGenerator/Descriptors.h @@ -42,11 +42,11 @@ #include /* Macros: */ - /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ - #define MIDI_STREAM_IN_EPNUM 2 + /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ + #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ - #define MIDI_STREAM_OUT_EPNUM 1 + /** Endpoint address of the MIDI streaming data OUT endpoint, for host-to-device data transfers. */ + #define MIDI_STREAM_OUT_EPADDR (ENDPOINT_DIR_OUT | 1) /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.c b/Projects/MIDIToneGenerator/MIDIToneGenerator.c index 4062bffab..5f17fdd1c 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.c +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.c @@ -45,14 +45,18 @@ USB_ClassInfo_MIDI_Device_t Keyboard_MIDI_Interface = .Config = { .StreamingInterfaceNumber = 1, - - .DataINEndpointNumber = MIDI_STREAM_IN_EPNUM, - .DataINEndpointSize = MIDI_STREAM_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MIDI_STREAM_OUT_EPNUM, - .DataOUTEndpointSize = MIDI_STREAM_EPSIZE, - .DataOUTEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = MIDI_STREAM_IN_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MIDI_STREAM_OUT_EPADDR, + .Size = MIDI_STREAM_EPSIZE, + .Banks = 1, + }, }, }; @@ -96,7 +100,7 @@ int main(void) MIDI_EventPacket_t ReceivedMIDIEvent; if (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent)) { - if ((ReceivedMIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0)) + if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_ON)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0)) { DDSNoteData* LRUNoteStruct = &NoteData[0]; @@ -130,7 +134,7 @@ int main(void) /* Turn on indicator LED to indicate note generation activity */ LEDs_SetAllLEDs(LEDS_LED1); } - else if ((ReceivedMIDIEvent.Command == (MIDI_COMMAND_NOTE_OFF >> 4)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0)) + else if ((ReceivedMIDIEvent.Event == MIDI_EVENT(0, MIDI_COMMAND_NOTE_OFF)) && ((ReceivedMIDIEvent.Data1 & 0x0F) == 0)) { bool FoundActiveNote = false; diff --git a/Projects/Magstripe/Descriptors.c b/Projects/Magstripe/Descriptors.c index aec8b880d..3784609d7 100644 --- a/Projects/Magstripe/Descriptors.c +++ b/Projects/Magstripe/Descriptors.c @@ -132,10 +132,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_EPNUM), + .EndpointAddress = KEYBOARD_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Projects/Magstripe/Descriptors.h b/Projects/Magstripe/Descriptors.h index 27ea9a1c5..f90816a82 100644 --- a/Projects/Magstripe/Descriptors.h +++ b/Projects/Magstripe/Descriptors.h @@ -58,8 +58,8 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the keyboard key press reporting endpoint. */ - #define KEYBOARD_EPNUM 1 + /** Endpoint address of the keyboard key press reporting endpoint. */ + #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) /** Size of the keyboard report endpoints, in bytes. */ #define KEYBOARD_EPSIZE 8 diff --git a/Projects/Magstripe/Magstripe.c b/Projects/Magstripe/Magstripe.c index 6e41ce67f..ecdf68b0b 100644 --- a/Projects/Magstripe/Magstripe.c +++ b/Projects/Magstripe/Magstripe.c @@ -57,11 +57,12 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = KEYBOARD_EPNUM, - .ReportINEndpointSize = KEYBOARD_EPSIZE, - .ReportINEndpointDoubleBank = KEYBOARD_EPSIZE, - + .ReportINEndpoint = + { + .Address = KEYBOARD_EPADDR, + .Size = KEYBOARD_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, diff --git a/Projects/MediaController/Descriptors.c b/Projects/MediaController/Descriptors.c index fc862aa90..b2b583c28 100644 --- a/Projects/MediaController/Descriptors.c +++ b/Projects/MediaController/Descriptors.c @@ -149,10 +149,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MEDIACONTROL_HID_EPNUM), + .EndpointAddress = MEDIACONTROL_HID_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MEDIACONTROL_HID_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Projects/MediaController/Descriptors.h b/Projects/MediaController/Descriptors.h index ec9b33082..3844e3138 100644 --- a/Projects/MediaController/Descriptors.h +++ b/Projects/MediaController/Descriptors.h @@ -57,11 +57,11 @@ } USB_Descriptor_Configuration_t; /* Macros: */ - /** Endpoint number of the Media Control HID reporting IN endpoint. */ - #define MEDIACONTROL_HID_EPNUM 1 + /** Endpoint address of the Media Control HID reporting IN endpoint. */ + #define MEDIACONTROL_HID_EPADDR (ENDPOINT_DIR_IN | 1) - /** Size in bytes of the Media Control HID reporting IN and OUT endpoints. */ - #define MEDIACONTROL_HID_EPSIZE 8 + /** Size in bytes of the Media Control HID reporting IN endpoint. */ + #define MEDIACONTROL_HID_EPSIZE 8 /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, diff --git a/Projects/MediaController/MediaController.c b/Projects/MediaController/MediaController.c index 01405270a..24f02580d 100644 --- a/Projects/MediaController/MediaController.c +++ b/Projects/MediaController/MediaController.c @@ -48,11 +48,12 @@ USB_ClassInfo_HID_Device_t MediaControl_HID_Interface = .Config = { .InterfaceNumber = 0, - - .ReportINEndpointNumber = MEDIACONTROL_HID_EPNUM, - .ReportINEndpointSize = MEDIACONTROL_HID_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = MEDIACONTROL_HID_EPADDR, + .Size = MEDIACONTROL_HID_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevMediaControlHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMediaControlHIDReportBuffer), }, diff --git a/Projects/MissileLauncher/ConfigDescriptor.c b/Projects/MissileLauncher/ConfigDescriptor.c index efcd2be5c..e287d78d3 100644 --- a/Projects/MissileLauncher/ConfigDescriptor.c +++ b/Projects/MissileLauncher/ConfigDescriptor.c @@ -109,16 +109,14 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Configure the HID data IN pipe */ - Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, - DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); /* Check if the HID interface contained an optional OUT data endpoint */ if (DataOUTEndpoint) { /* Configure the HID data OUT pipe */ - Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT, - DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); + Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); } /* Valid data found, return success */ diff --git a/Projects/MissileLauncher/ConfigDescriptor.h b/Projects/MissileLauncher/ConfigDescriptor.h index b05f7efe4..c857bf7c0 100644 --- a/Projects/MissileLauncher/ConfigDescriptor.h +++ b/Projects/MissileLauncher/ConfigDescriptor.h @@ -45,11 +45,11 @@ /** Interface Class value for the Human Interface Device class. */ #define HID_CLASS 0x03 - /** Pipe number for the HID data IN pipe. */ - #define HID_DATA_IN_PIPE 1 + /** Pipe address for the HID data IN pipe. */ + #define HID_DATA_IN_PIPE (PIPE_DIR_IN | 1) - /** Pipe number for the HID data OUT pipe. */ - #define HID_DATA_OUT_PIPE 2 + /** Pipe address for the HID data OUT pipe. */ + #define HID_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf index 953c2af7e..7dc0279fc 100644 --- a/Projects/RelayBoard/Doxygen.conf +++ b/Projects/RelayBoard/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "OB's Dual-Relay outlet control using a Teensy2++" +PROJECT_NAME = "OB's Dual-Relay Outlet Control Project" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Projects/SerialToLCD/Descriptors.c b/Projects/SerialToLCD/Descriptors.c new file mode 100644 index 000000000..ea8ce8c94 --- /dev/null +++ b/Projects/SerialToLCD/Descriptors.c @@ -0,0 +1,272 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + +/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as + * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. + * This allows the host to track a device across insertions on different ports, allowing them to retain allocated + * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices + * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value + * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and + * port location). + */ +#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) + #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. +#endif + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(01.10), + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_NoSpecificSubclass, + .Protocol = CDC_CSCP_NoSpecificProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x204B, + .ReleaseNumber = VERSION_BCD(00.01), + + .ManufacturerStrIndex = 0x01, + .ProductStrIndex = 0x02, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .CDC_CCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 0, + .AlternateSetting = 0, + + .TotalEndpoints = 1, + + .Class = CDC_CSCP_CDCClass, + .SubClass = CDC_CSCP_ACMSubclass, + .Protocol = CDC_CSCP_ATCommandProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_Functional_Header = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Header, + + .CDCSpecification = VERSION_BCD(01.10), + }, + + .CDC_Functional_ACM = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_ACM, + + .Capabilities = 0x06, + }, + + .CDC_Functional_Union = + { + .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, + .Subtype = CDC_DSUBTYPE_CSInterface_Union, + + .MasterInterfaceNumber = 0, + .SlaveInterfaceNumber = 1, + }, + + .CDC_NotificationEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_NOTIFICATION_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_NOTIFICATION_EPSIZE, + .PollingIntervalMS = 0xFF + }, + + .CDC_DCI_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = 1, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = CDC_CSCP_CDCDataClass, + .SubClass = CDC_CSCP_NoDataSubclass, + .Protocol = CDC_CSCP_NoDataProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .CDC_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_RX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .CDC_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = CDC_TX_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = CDC_TXRX_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t PROGMEM LanguageString = +{ + .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, + + .UnicodeString = {LANGUAGE_ID_ENG} +}; + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ManufacturerString = +{ + .Header = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String}, + + .UnicodeString = L"Simon Foster" +}; + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ProductString = +{ + .Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String}, + + .UnicodeString = L"USB-HD44780 Adapter" +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case 0x00: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case 0x01: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case 0x02: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/Projects/SerialToLCD/Descriptors.h b/Projects/SerialToLCD/Descriptors.h new file mode 100644 index 000000000..5a316a2cd --- /dev/null +++ b/Projects/SerialToLCD/Descriptors.h @@ -0,0 +1,90 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include + + #include + + /* Macros: */ + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) + + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size in bytes of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPSIZE 8 + + /** Size in bytes of the CDC data IN and OUT endpoints. */ + #define CDC_TXRX_EPSIZE 16 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // CDC Command Interface + USB_Descriptor_Interface_t CDC_CCI_Interface; + USB_CDC_Descriptor_FunctionalHeader_t CDC_Functional_Header; + USB_CDC_Descriptor_FunctionalACM_t CDC_Functional_ACM; + USB_CDC_Descriptor_FunctionalUnion_t CDC_Functional_Union; + USB_Descriptor_Endpoint_t CDC_NotificationEndpoint; + + // CDC Data Interface + USB_Descriptor_Interface_t CDC_DCI_Interface; + USB_Descriptor_Endpoint_t CDC_DataOutEndpoint; + USB_Descriptor_Endpoint_t CDC_DataInEndpoint; + } USB_Descriptor_Configuration_t; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + +#endif + diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf new file mode 100644 index 000000000..af2e82e97 --- /dev/null +++ b/Projects/SerialToLCD/Doxygen.conf @@ -0,0 +1,1814 @@ +# Doxyfile 1.8.0 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" "). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. + +PROJECT_NAME = "Simon Foster's USB Serial to HD44780 LCD Project" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = 0.0.0 + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful if your file system +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this +# tag. The format is ext=language, where ext is a file extension, and language +# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, +# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make +# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C +# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions +# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = NO + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also makes the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penalty. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will roughly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +SYMBOL_CACHE_SIZE = 0 + +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespaces are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen +# will list include files with double quotes in the documentation +# rather than with sharp brackets. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen +# will sort the (brief and detailed) documentation of class members so that +# constructors and destructors are listed first. If set to NO (the default) +# the constructors will appear in the respective orders defined by +# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. +# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO +# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or macro consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and macros in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command , where is the value of +# the FILE_VERSION_FILTER tag, and is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. The create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. +# You can optionally specify a file name after the option, if omitted +# DoxygenLayout.xml will be used as the name of the layout file. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_NO_PARAMDOC option can be enabled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh +# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py +# *.f90 *.f *.for *.vhd *.vhdl + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = NO + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = YES + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# style sheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. +# Doxygen will adjust the colors in the style sheet and background images +# according to this color. Hue is specified as an angle on a colorwheel, +# see http://en.wikipedia.org/wiki/Hue for more information. +# For instance the value 0 represents red, 60 is yellow, 120 is green, +# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. +# The allowed range is 0 to 359. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of +# the colors in the HTML output. For a value of 0 the output will use +# grayscales only. A value of 255 will produce the most vivid colors. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to +# the luminance component of the colors in the HTML output. Values below +# 100 gradually make the output lighter, whereas values above 100 make +# the output darker. The value divided by 100 is the actual gamma applied, +# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, +# and 100 does not change the gamma. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting +# this to NO can help when comparing the output of multiple runs. + +HTML_TIMESTAMP = NO + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = YES + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated +# that can be used as input for Qt's qhelpgenerator to generate a +# Qt Compressed Help (.qch) of the generated HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to +# add. For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see +# +# Qt Help Project / Custom Filters. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's +# filter section matches. +# +# Qt Help Project / Filter Attributes. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files +# will be generated, which together with the HTML files, form an Eclipse help +# plugin. To install this plugin and make it available under the help contents +# menu in Eclipse, the contents of the directory containing the HTML and XML +# files needs to be copied into the plugins directory of eclipse. The name of +# the directory within the plugins directory should be the same as +# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before +# the help appears. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have +# this name. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. + +ENUM_VALUES_PER_LINE = 1 + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open +# links to external symbols imported via tag files in a separate window. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are +# not supported properly for IE 6.0, but are supported on all modern browsers. +# Note that when changing this option you need to delete any form_*.png files +# in the HTML output before the changes have effect. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax +# (see http://www.mathjax.org) which uses client side Javascript for the +# rendering instead of using prerendered bitmaps. Use this if you do not +# have LaTeX installed or if you want to formulas look prettier in the HTML +# output. When enabled you may also need to install MathJax separately and +# configure the path to it using the MATHJAX_RELPATH option. + +USE_MATHJAX = NO + +# When MathJax is enabled you need to specify the location relative to the +# HTML output directory using the MATHJAX_RELPATH option. The destination +# directory should contain the MathJax.js script. For instance, if the mathjax +# directory is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box +# for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using +# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets +# (GENERATE_DOCSET) there is already a search function so this one should +# typically be disabled. For large projects the javascript based search engine +# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a PHP enabled web server instead of at the web client +# using Javascript. Doxygen will generate the search PHP script and index +# file to put on the web server. The advantage of the server +# based approach is that it scales better to large projects and allows +# full text search. The disadvantages are that it is more difficult to setup +# and does not have live searching capabilities. + +SERVER_BASED_SEARCH = NO + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. +# Note that when enabling USE_PDFLATEX this option is only used for +# generating bitmaps for formulas in the HTML output, but not in the +# Makefile that is written to the output directory. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include +# source code with syntax highlighting in the LaTeX output. +# Note that which sources are shown also depends on other settings +# such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load style sheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# pointed to by INCLUDE_PATH will be searched when a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = __DOXYGEN__ \ + PROGMEM + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option also works with HAVE_DOT disabled, but it is recommended to +# install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is +# allowed to run in parallel. When set to 0 (the default) doxygen will +# base this on the number of processors available in the system. You can set it +# explicitly to a value larger than 0 to get control over the balance +# between CPU load and processing speed. + +DOT_NUM_THREADS = 0 + +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will generate a graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the +# \mscfile command). + +MSCFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 15 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 2 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/Projects/SerialToLCD/Lib/HD44780.c b/Projects/SerialToLCD/Lib/HD44780.c new file mode 100644 index 000000000..7bf989d2c --- /dev/null +++ b/Projects/SerialToLCD/Lib/HD44780.c @@ -0,0 +1,127 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#include "HD44780.h" + +static void HD44780_WriteNibble(const uint8_t nib) +{ + /* Read PORTD and clear the ENABLE and PD0..3 bits + then OR in the data */ + + PORTD = (PORTD & ~(ENABLE | LO4_MASK)) | (nib & LO4_MASK); + + /* Enforce address setup time (tAS) 60ns + 60 @ 16MHz = <1 + Let's us a few NOPs for good measure */ + asm volatile("nop\n\t" + "nop\n\t" + :: ); + + /* Take enable high and enforce Enable High time (tEH=450ns) + 450ns @ 16MHz = 7.2 => 7 NOPs */ + + PORTD |= ENABLE; + + asm volatile("nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + :: ); + + /* Take enable low and enforce Enable Low time (tEL=500ns) + 500ns @ 16MHz = 8.0 => 7 NOPs */ + PORTD &= ~ENABLE; + + asm volatile("nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + "nop\n\t" + :: ); +} + +static void HD44780_WriteByte(const uint8_t c) +{ + HD44780_WriteNibble(HI4(c)); + HD44780_WriteNibble(LO4(c)); +} + +static void HD44780_PowerUp4Bit(void) +{ + /* Wait for more than 40 ms after VCC rises to 2.7 V */ + _delay_ms(40); + HD44780_WriteNibble(0x03); // FN_SET 8-bit + + /* Wait for more than 4.1 ms */ + _delay_ms(5); + HD44780_WriteNibble(0x03); // FN_SET 8-bit + + /* Wait for more than 100 µs */ + _delay_us(100); + HD44780_WriteNibble(0x03); // FN_SET 8-bit + + /* From now on we must allow 40us for each command */ + _delay_us(50); + HD44780_WriteNibble(0x02); // FN_SET 4-bit + + /* The LCD is now in 4-bit mode so we can continue + using the 4-bit API */ + _delay_us(50); +} + +void HD44780_Initialise(void) +{ + PORTD &= ~ALL_BITS; + DDRD |= ALL_BITS; + HD44780_PowerUp4Bit(); +} + +void HD44780_WriteCommand(const uint8_t c) +{ + PORTD &= ~RS; + HD44780_WriteByte(c); + _delay_us(50); +} + +void HD44780_WriteData(const uint8_t c) +{ + PORTD |= RS; + HD44780_WriteByte(c); + PORTD &= ~RS; + _delay_us(50); +} diff --git a/Projects/SerialToLCD/Lib/HD44780.h b/Projects/SerialToLCD/Lib/HD44780.h new file mode 100644 index 000000000..680e69bcf --- /dev/null +++ b/Projects/SerialToLCD/Lib/HD44780.h @@ -0,0 +1,64 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for HD44780.c. + */ + +#ifndef _HD44780_H_ +#define _HD44780_H_ + + /* Includes: */ + #include + #include + #include + + /* Macros: */ + #define RS (1 << 4) /* PD4 */ + #define ENABLE (1 << 7) /* PD7 */ + + #define HI4_MASK 0xF0 + #define LO4_MASK 0x0F /* PD0-PD3 */ + + #define ALL_BITS (RS | ENABLE | LO4_MASK) + + #define HI4(c) ((c & HI4_MASK) >> 4) + #define LO4(c) ((c & LO4_MASK) >> 0) + + #define CMD_DISPLAY_ON 0x0C + + /* Function Prototypes: */ + void HD44780_Initialise(void); + void HD44780_WriteData(const uint8_t c); + void HD44780_WriteCommand(const uint8_t c); + +#endif diff --git a/Projects/SerialToLCD/SerialToLCD.c b/Projects/SerialToLCD/SerialToLCD.c new file mode 100644 index 000000000..952e2d4f2 --- /dev/null +++ b/Projects/SerialToLCD/SerialToLCD.c @@ -0,0 +1,168 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the SerialToLCD program. This file contains the main tasks of + * the project and is responsible for the initial application hardware configuration. + */ + +#include "SerialToLCD.h" + +/** Circular buffer to hold data from the host before it is sent to the LCD */ +static RingBuffer_t FromHost_Buffer; + +/** Underlying data buffer for \ref FromHost_Buffer, where the stored bytes are located. */ +static uint8_t FromHost_Buffer_Data[128]; + +/** LUFA CDC Class driver interface configuration and state information. This structure is + * passed to all CDC Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = + { + .Config = + { + .ControlInterfaceNumber = 0, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, + }, + }; + + +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + SetupHardware(); + + RingBuffer_InitBuffer(&FromHost_Buffer, FromHost_Buffer_Data, sizeof(FromHost_Buffer_Data)); + + sei(); + + for (;;) + { + /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */ + if (!(RingBuffer_IsFull(&FromHost_Buffer))) + { + int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); + + /* Read bytes from the USB OUT endpoint into the USART transmit buffer */ + if (!(ReceivedByte < 0)) + RingBuffer_Insert(&FromHost_Buffer, ReceivedByte); + } + + while (RingBuffer_GetCount(&FromHost_Buffer) > 0) + { + static uint8_t EscapePending = 0; + int16_t HD44780Byte = RingBuffer_Remove(&FromHost_Buffer); + + if (HD44780Byte == COMMAND_ESCAPE) + { + if (EscapePending) + { + HD44780_WriteData(HD44780Byte); + EscapePending = 0; + } + else + { + /* Next received character is the command byte */ + EscapePending = 1; + } + } + else + { + if (EscapePending) + { + HD44780_WriteCommand(HD44780Byte); + EscapePending = 0; + } + else + { + HD44780_WriteData(HD44780Byte); + } + } + } + + CDC_Device_USBTask(&VirtualSerial_CDC_Interface); + USB_USBTask(); + } +} + +/** Configures the board hardware and chip peripherals for the application's functionality. */ +void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Hardware Initialization */ + USB_Init(); + + /* Power up the HD44780 Interface */ + HD44780_Initialise(); + HD44780_WriteCommand(CMD_DISPLAY_ON); + + /* Start the flush timer so that overflows occur rapidly to push received bytes to the USB interface */ + TCCR0B = (1 << CS02); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); +} diff --git a/Projects/SerialToLCD/SerialToLCD.h b/Projects/SerialToLCD/SerialToLCD.h new file mode 100644 index 000000000..52efe4401 --- /dev/null +++ b/Projects/SerialToLCD/SerialToLCD.h @@ -0,0 +1,63 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + Copyright 2012 Simon Foster (simon.foster [at] inbox [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for SerialToLCD.c. + */ + +#ifndef _SERIALTOLCD_H_ +#define _SERIALTOLCD_H_ + + /* Includes: */ + #include + #include + #include + #include + + #include "Descriptors.h" + #include "Lib/HD44780.h" + + #include + #include + #include + + /* Macros: */ + #define COMMAND_ESCAPE 0x1B + + /* Function Prototypes: */ + void SetupHardware(void); + + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + +#endif + diff --git a/Projects/SerialToLCD/SerialToLCD.txt b/Projects/SerialToLCD/SerialToLCD.txt new file mode 100644 index 000000000..84237b45f --- /dev/null +++ b/Projects/SerialToLCD/SerialToLCD.txt @@ -0,0 +1,97 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Simon Foster's USB Serial to HD44780 LCD Project + * + * \section Sec_Compat Project Compatibility: + * + * The following list indicates what microcontrollers are compatible with this project. + * + * - AT90USB162 + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this project. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Communications Device Class (CDC)
USB Subclass:Abstract Control Model (ACM)
Relevant Standards:USBIF CDC Class Standard
Usable Speeds:Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * Firmware for a USB Virtual Serial to HD44780 LCD controller project, by Simon Foster. This + * project connects a standard HD7780 compatible LCD controller to a PC via a virtual serial + * link, so that data supplied by the host can be written to the display. This project is + * designed to use the Minimum USB AVR board, however it can be modified to suit other hardware + * if desired. + * + * LCD Datasheet: http://www.sparkfun.com/datasheets/LCD/HD44780.pdf \n + * More Information: http://en.wikipedia.org/wiki/HD44780_Character_LCD \n + * + * Below are the connections between the AVR Minimus board and LCD. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
AVR Pin:HD44780 LCD Pin:
VCCVCC
GNDGND
PD0DB4
PD1DB5
PD2DB6
PD3DB7
PD4/RS
GND/RW
PD7/E
+ */ diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile new file mode 100644 index 000000000..ad66578e9 --- /dev/null +++ b/Projects/SerialToLCD/makefile @@ -0,0 +1,731 @@ +# Hey Emacs, this is a -*- makefile -*- +#---------------------------------------------------------------------------- +# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. +# >> Modified for use with the LUFA project. << +# +# Released to the Public Domain +# +# Additional material for this makefile was written by: +# Peter Fleury +# Tim Henigan +# Colin O'Flynn +# Reiner Patommel +# Markus Pfaff +# Sander Pool +# Frederik Rouleau +# Carlos Lamas +# Dean Camera +# Opendous Inc. +# Denver Gingerich +# +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make doxygen = Generate DoxyGen documentation for the project (must have +# DoxyGen installed) +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + + +# MCU name +MCU = at90usb162 + + +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + + +# Target board (see library "Board Types" documentation, NONE for projects not requiring +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# "Board" inside the application directory. +BOARD = MINIMUS + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Target file name (without extension). +TARGET = SerialToLCD + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Path to the LUFA library +LUFA_PATH = ../.. + + +# LUFA library compile-time options and predefined tokens +LUFA_OPTS = -D USB_DEVICE_ONLY +LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 +LUFA_OPTS += -D ORDERED_EP_CONFIG +LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 +LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 +LUFA_OPTS += -D USE_FLASH_DESCRIPTORS +LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT + + +# Create the LUFA source path variables by including the LUFA root makefile +include $(LUFA_PATH)/LUFA/makefile + + +# List C source files here. (C dependencies are automatically generated.) +SRC = $(TARGET).c \ + Lib/HD44780.c \ + Descriptors.c \ + $(LUFA_SRC_USB) \ + $(LUFA_SRC_USBCLASS) + + +# List C++ source files here. (C dependencies are automatically generated.) +CPPSRC = + + +# List Assembler source files here. +# Make them always end in a capital .S. Files ending in a lowercase .s +# will not be considered source files but generated files (assembler +# output from the compiler), and will be deleted upon "make clean"! +# Even though the DOS/Win* filesystem matches both .s and .S the same, +# it will preserve the spelling of the filenames, and gcc itself does +# care about how the name is spelled on its command-line. +ASRC = + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRAINCDIRS = $(LUFA_PATH)/ + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += -DF_USB=$(F_USB)UL +CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) +CDEFS += $(LUFA_OPTS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += -DF_USB=$(F_USB)UL +ADEFS += -DBOARD=BOARD_$(BOARD) +ADEFS += $(LUFA_OPTS) + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +CPPDEFS += -DF_USB=$(F_USB)UL +CPPDEFS += -DBOARD=BOARD_$(BOARD) +CPPDEFS += $(LUFA_OPTS) +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fno-inline-small-functions +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -fno-strict-aliasing +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = jtagmkII + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = usb + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + +# Define all listing files. +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf +MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) +FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) + + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + +flip: $(TARGET).hex + batchisp -hardware usb -device $(MCU) -operation erase f + batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + +dfu: $(TARGET).hex + dfu-programmer $(MCU) erase + dfu-programmer $(MCU) flash $(TARGET).hex + dfu-programmer $(MCU) reset + +flip-ee: $(TARGET).hex $(TARGET).eep + $(COPY) $(TARGET).eep $(TARGET)eep.hex + batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase + batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program + batchisp -hardware usb -device $(MCU) -operation start reset 0 + $(REMOVE) $(TARGET)eep.hex + +dfu-ee: $(TARGET).hex $(TARGET).eep + dfu-programmer $(MCU) eeprom-flash $(TARGET).eep + dfu-programmer $(MCU) reset + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + @echo $(MSG_CLEANING) + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) + $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) + $(REMOVE) $(SRC:.c=.s) + $(REMOVE) $(SRC:.c=.d) + $(REMOVE) $(SRC:.c=.i) + $(REMOVEDIR) .dep + +doxygen: + @echo Generating Project Documentation \($(TARGET)\)... + @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ + exit 1; \ + fi; + @echo Documentation Generation Complete. + +clean_doxygen: + rm -rf Documentation + +checksource: + @for f in $(SRC) $(CPPSRC) $(ASRC); do \ + if [ -f $$f ]; then \ + echo "Found Source File: $$f" ; \ + else \ + echo "Source File Not Found: $$f" ; \ + fi; done + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff doxygen clean \ +clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ +debug gdb-config checksource diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c index d930137ad..ffd312df8 100644 --- a/Projects/TempDataLogger/Descriptors.c +++ b/Projects/TempDataLogger/Descriptors.c @@ -136,20 +136,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .HID_Interface = @@ -183,10 +183,10 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | GENERIC_IN_EPNUM), + .EndpointAddress = GENERIC_IN_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, }; diff --git a/Projects/TempDataLogger/Descriptors.h b/Projects/TempDataLogger/Descriptors.h index 87ed01e1b..5f9814308 100644 --- a/Projects/TempDataLogger/Descriptors.h +++ b/Projects/TempDataLogger/Descriptors.h @@ -17,17 +17,17 @@ #include "TempDataLogger.h" /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - /** Endpoint number of the Generic HID reporting IN endpoint. */ - #define GENERIC_IN_EPNUM 1 + /** Endpoint address of the Generic HID reporting IN endpoint. */ + #define GENERIC_IN_EPADDR (ENDPOINT_DIR_IN | 1) /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 16 diff --git a/Projects/TempDataLogger/TempDataLogger.c b/Projects/TempDataLogger/TempDataLogger.c index 83590b311..9ead42ed3 100644 --- a/Projects/TempDataLogger/TempDataLogger.c +++ b/Projects/TempDataLogger/TempDataLogger.c @@ -45,15 +45,18 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = .Config = { .InterfaceNumber = 0, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; @@ -70,11 +73,12 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .Config = { .InterfaceNumber = 1, - - .ReportINEndpointNumber = GENERIC_IN_EPNUM, - .ReportINEndpointSize = GENERIC_EPSIZE, - .ReportINEndpointDoubleBank = false, - + .ReportINEndpoint = + { + .Address = GENERIC_IN_EPADDR, + .Size = GENERIC_EPSIZE, + .Banks = 1, + }, .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, diff --git a/Projects/USBtoSerial/Descriptors.c b/Projects/USBtoSerial/Descriptors.c index e623a541d..b7aa48cb4 100644 --- a/Projects/USBtoSerial/Descriptors.c +++ b/Projects/USBtoSerial/Descriptors.c @@ -143,7 +143,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,20 +169,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/USBtoSerial/Descriptors.h b/Projects/USBtoSerial/Descriptors.h index 03f4e5e7a..e481793b0 100644 --- a/Projects/USBtoSerial/Descriptors.h +++ b/Projects/USBtoSerial/Descriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/USBtoSerial/USBtoSerial.c b/Projects/USBtoSerial/USBtoSerial.c index 194f6b084..7fe67da44 100644 --- a/Projects/USBtoSerial/USBtoSerial.c +++ b/Projects/USBtoSerial/USBtoSerial.c @@ -57,18 +57,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = false, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; diff --git a/Projects/Webserver/Descriptors.c b/Projects/Webserver/Descriptors.c index 54cec1ce3..57519c864 100644 --- a/Projects/Webserver/Descriptors.c +++ b/Projects/Webserver/Descriptors.c @@ -157,7 +157,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -183,20 +183,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_Interface = @@ -219,20 +219,20 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | MASS_STORAGE_IN_EPNUM), + .EndpointAddress = MASS_STORAGE_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | MASS_STORAGE_OUT_EPNUM), + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/Webserver/Descriptors.h b/Projects/Webserver/Descriptors.h index b0e0c1160..591947c89 100644 --- a/Projects/Webserver/Descriptors.h +++ b/Projects/Webserver/Descriptors.h @@ -42,23 +42,23 @@ #include /* Macros: */ - /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 5 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/Webserver/USBDeviceMode.c b/Projects/Webserver/USBDeviceMode.c index 591ee92b0..158e7590f 100644 --- a/Projects/Webserver/USBDeviceMode.c +++ b/Projects/Webserver/USBDeviceMode.c @@ -45,19 +45,24 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = true, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = true, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = true, - + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, .AdapterVendorDescription = "LUFA RNDIS Adapter", .AdapterMACAddress = {{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}, }, @@ -71,16 +76,19 @@ USB_ClassInfo_MS_Device_t Disk_MS_Interface = { .Config = { - .InterfaceNumber = 2, - - .DataINEndpointNumber = MASS_STORAGE_IN_EPNUM, - .DataINEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataINEndpointDoubleBank = false, - - .DataOUTEndpointNumber = MASS_STORAGE_OUT_EPNUM, - .DataOUTEndpointSize = MASS_STORAGE_IO_EPSIZE, - .DataOUTEndpointDoubleBank = false, - + .InterfaceNumber = 2, + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, .TotalLUNs = 1, }, }; diff --git a/Projects/Webserver/USBHostMode.c b/Projects/Webserver/USBHostMode.c index e7091fc89..601ebda45 100644 --- a/Projects/Webserver/USBHostMode.c +++ b/Projects/Webserver/USBHostMode.c @@ -44,16 +44,22 @@ USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host = { .Config = { - .DataINPipeNumber = 1, - .DataINPipeDoubleBank = false, - - .DataOUTPipeNumber = 2, - .DataOUTPipeDoubleBank = false, - - .NotificationPipeNumber = 3, - .NotificationPipeDoubleBank = false, - - .HostMaxPacketSize = UIP_CONF_BUFFER_SIZE, + .DataINPipe = + { + .Address = (PIPE_DIR_IN | 1), + .Banks = 1, + }, + .DataOUTPipe = + { + .Address = (PIPE_DIR_OUT | 2), + .Banks = 1, + }, + .NotificationPipe = + { + .Address = (PIPE_DIR_IN | 3), + .Banks = 1, + }, + .HostMaxPacketSize = UIP_CONF_BUFFER_SIZE, }, }; diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.c b/Projects/XPLAINBridge/AVRISPDescriptors.c index 5f2071ebb..a901e0945 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.c +++ b/Projects/XPLAINBridge/AVRISPDescriptors.c @@ -106,7 +106,7 @@ const AVRISP_USB_Descriptor_Configuration_t PROGMEM AVRISP_ConfigurationDescript { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | AVRISP_DATA_IN_EPNUM), + .EndpointAddress = AVRISP_DATA_IN_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A @@ -116,7 +116,7 @@ const AVRISP_USB_Descriptor_Configuration_t PROGMEM AVRISP_ConfigurationDescript { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | AVRISP_DATA_OUT_EPNUM), + .EndpointAddress = AVRISP_DATA_OUT_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = AVRISP_DATA_EPSIZE, .PollingIntervalMS = 0x0A diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.h b/Projects/XPLAINBridge/AVRISPDescriptors.h index 9487f685b..c0eeedf70 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.h +++ b/Projects/XPLAINBridge/AVRISPDescriptors.h @@ -42,18 +42,15 @@ #include /* Macros: */ - #if !defined(LIBUSB_DRIVER_COMPAT) - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 + #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) + /** Endpoint address of the AVRISP data OUT endpoint. */ + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 2 + /** Endpoint address of the AVRISP data IN endpoint. */ + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 2) #else - /** Endpoint number of the AVRISP data OUT endpoint. */ - #define AVRISP_DATA_OUT_EPNUM 2 - - /** Endpoint number of the AVRISP data IN endpoint. */ - #define AVRISP_DATA_IN_EPNUM 3 + #define AVRISP_DATA_OUT_EPADDR (ENDPOINT_DIR_OUT | 2) + #define AVRISP_DATA_IN_EPADDR (ENDPOINT_DIR_IN | 3) #endif /** Size in bytes of the AVRISP data endpoint. */ diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf index 6b9c96de9..5628d23a7 100644 --- a/Projects/XPLAINBridge/Doxygen.conf +++ b/Projects/XPLAINBridge/Doxygen.conf @@ -26,7 +26,7 @@ DOXYFILE_ENCODING = UTF-8 # identify the project. Note that if you do not use Doxywizard you need # to put quotes around the project name if it contains spaces. -PROJECT_NAME = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Device Demo" +PROJECT_NAME = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Project" # The PROJECT_NUMBER tag can be used to enter a project or revision number. # This could be handy for archiving the generated documentation or diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 30039aa2b..6c131afd4 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -143,7 +143,7 @@ const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM), + .EndpointAddress = CDC_NOTIFICATION_EPADDR, .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF @@ -169,20 +169,20 @@ const USART_USB_Descriptor_Configuration_t PROGMEM USART_ConfigurationDescriptor { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM), + .EndpointAddress = CDC_RX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 }, .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM), + .EndpointAddress = CDC_TX_EPADDR, .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, - .PollingIntervalMS = 0x01 + .PollingIntervalMS = 0x05 } }; diff --git a/Projects/XPLAINBridge/USARTDescriptors.h b/Projects/XPLAINBridge/USARTDescriptors.h index 2569a72a3..4bb771be9 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.h +++ b/Projects/XPLAINBridge/USARTDescriptors.h @@ -42,14 +42,14 @@ #include /* Macros: */ - /** Endpoint number of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPNUM 2 + /** Endpoint address of the CDC device-to-host notification IN endpoint. */ + #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) - /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + /** Endpoint address of the CDC device-to-host data IN endpoint. */ + #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 3) - /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + /** Endpoint address of the CDC host-to-device data OUT endpoint. */ + #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 4) /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index bee770a98..071c13e53 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -48,18 +48,24 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface = .Config = { .ControlInterfaceNumber = 0, - - .DataINEndpointNumber = CDC_TX_EPNUM, - .DataINEndpointSize = CDC_TXRX_EPSIZE, - .DataINEndpointDoubleBank = true, - - .DataOUTEndpointNumber = CDC_RX_EPNUM, - .DataOUTEndpointSize = CDC_TXRX_EPSIZE, - .DataOUTEndpointDoubleBank = true, - - .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, - .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, - .NotificationEndpointDoubleBank = false, + .DataINEndpoint = + { + .Address = CDC_TX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = CDC_RX_EPADDR, + .Size = CDC_TXRX_EPSIZE, + .Banks = 1, + }, + .NotificationEndpoint = + { + .Address = CDC_NOTIFICATION_EPADDR, + .Size = CDC_NOTIFICATION_EPSIZE, + .Banks = 1, + }, }, }; @@ -105,7 +111,7 @@ void AVRISP_Task(void) V2Params_UpdateParamValues(); - Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM); + Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPADDR); /* Check to see if a V2 Protocol command has been received */ if (Endpoint_IsOUTReceived()) @@ -213,12 +219,10 @@ void EVENT_USB_Device_ConfigurationChanged(void) } else { - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #if defined(LIBUSB_DRIVER_COMPAT) - ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN, - AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE); + ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPADDR, EP_TYPE_BULK, AVRISP_DATA_EPSIZE, 1); #endif /* Configure the V2 protocol packet handler */ diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index 5570a1a0a..33c66bf51 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -46,9 +46,7 @@ #include "AVRISPDescriptors.h" #include "USARTDescriptors.h" - // cppcheck-suppress missingInclude #include "Lib/V2Protocol.h" - // cppcheck-suppress missingInclude #include "Lib/SoftUART.h" #include diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index 9dead426e..e71d06ad7 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -79,11 +79,6 @@ * Description: * * - * BUFFER_SIZE - * LightweightRingBuff.h - * Defines the maximum number of bytes which can be buffered in each Ring Buffer when in serial bridge mode. - * - * * LIBUSB_DRIVER_COMPAT * Makefile LUFA_OPTS * Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making diff --git a/Projects/makefile b/Projects/makefile index 707188cf9..d8fe77a89 100644 --- a/Projects/makefile +++ b/Projects/makefile @@ -41,6 +41,9 @@ all: $(MAKE) -C RelayBoard clean $(MAKE) -C RelayBoard all + $(MAKE) -C SerialToLCD clean + $(MAKE) -C SerialToLCD all + $(MAKE) -C TempDataLogger clean $(MAKE) -C TempDataLogger all @@ -63,6 +66,7 @@ all: $(MAKE) -C MIDIToneGenerator $@ $(MAKE) -C MissileLauncher $@ $(MAKE) -C RelayBoard $@ + $(MAKE) -C SerialToLCD $@ $(MAKE) -C TempDataLogger $@ $(MAKE) -C USBtoSerial $@ $(MAKE) -C Webserver $@ -- cgit v1.2.3 From 74fb2d895e3197f9b0204366d7f6f52c9c41b2ff Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 10 May 2012 19:42:42 +0000 Subject: AppConfigHeaders: Update bootloaders to use configuration header files, rather than makefile defines. --- Bootloaders/CDC/BootloaderCDC.h | 1 + Bootloaders/CDC/BootloaderCDC.txt | 8 ++-- Bootloaders/CDC/Config/AppConfig.h | 17 ++++--- Bootloaders/CDC/Config/LUFAConfig.h | 6 +-- Bootloaders/CDC/Doxygen.conf | 3 +- Bootloaders/DFU/BootloaderDFU.txt | 2 +- Bootloaders/DFU/Config/LUFAConfig.h | 93 +++++++++++++++++++++++++++++++++++++ Bootloaders/DFU/Doxygen.conf | 3 +- Bootloaders/DFU/makefile | 14 +----- Bootloaders/HID/Config/LUFAConfig.h | 93 +++++++++++++++++++++++++++++++++++++ Bootloaders/HID/makefile | 14 +----- LUFA.pnproj | 2 +- 12 files changed, 214 insertions(+), 42 deletions(-) create mode 100644 Bootloaders/DFU/Config/LUFAConfig.h create mode 100644 Bootloaders/HID/Config/LUFAConfig.h diff --git a/Bootloaders/CDC/BootloaderCDC.h b/Bootloaders/CDC/BootloaderCDC.h index 257e884e6..36af96216 100644 --- a/Bootloaders/CDC/BootloaderCDC.h +++ b/Bootloaders/CDC/BootloaderCDC.h @@ -47,6 +47,7 @@ #include "Descriptors.h" #include "BootloaderAPI.h" + #include "Config/AppConfig.h" #include #include diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index 618b95d25..9abd7b2f8 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -133,25 +133,25 @@ * * * NO_BLOCK_SUPPORT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable memory block read/write support in the bootloader, requiring all reads and writes to be made * using the byte-level commands. * * * NO_EEPROM_BYTE_SUPPORT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable EEPROM memory byte read/write support in the bootloader, requiring all EEPROM reads and writes * to be made using the block-level commands. * * * NO_FLASH_BYTE_SUPPORT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable FLASH memory byte read/write support in the bootloader, requiring all FLASH reads and writes * to be made using the block-level commands. * * * NO_LOCK_BYTE_WRITE_SUPPORT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable lock byte write support in the bootloader, preventing the lock bits from being set programmatically. * * diff --git a/Bootloaders/CDC/Config/AppConfig.h b/Bootloaders/CDC/Config/AppConfig.h index ae3e50e1d..9f9b1ce25 100644 --- a/Bootloaders/CDC/Config/AppConfig.h +++ b/Bootloaders/CDC/Config/AppConfig.h @@ -29,22 +29,25 @@ */ /** \file - * \brief LUFA Library Configuration Header File + * \brief Application Configuration Header File * * This is a header file which is be used to configure LUFA's * compile time options, as an alternative to the compile time * constants supplied through a makefile. * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. */ #ifndef _APP_CONFIG_H_ #define _APP_CONFIG_H_ - #define NO_BLOCK_SUPPORT - #define NO_EEPROM_BYTE_SUPPORT - #define NO_FLASH_BYTE_SUPPORT - #define NO_LOCK_BYTE_WRITE_SUPPORT +// #define NO_BLOCK_SUPPORT + +// #define NO_EEPROM_BYTE_SUPPORT + +// #define NO_FLASH_BYTE_SUPPORT + +// #define NO_LOCK_BYTE_WRITE_SUPPORT #endif \ No newline at end of file diff --git a/Bootloaders/CDC/Config/LUFAConfig.h b/Bootloaders/CDC/Config/LUFAConfig.h index c5a01c2fa..15ab0599f 100644 --- a/Bootloaders/CDC/Config/LUFAConfig.h +++ b/Bootloaders/CDC/Config/LUFAConfig.h @@ -31,9 +31,9 @@ /** \file * \brief LUFA Library Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. * * For information on what each token does, refer to the LUFA * manual section "Summary of Compile Tokens". diff --git a/Bootloaders/CDC/Doxygen.conf b/Bootloaders/CDC/Doxygen.conf index a5b4bd683..2c655dcff 100644 --- a/Bootloaders/CDC/Doxygen.conf +++ b/Bootloaders/CDC/Doxygen.conf @@ -1531,7 +1531,8 @@ INCLUDE_FILE_PATTERNS = # instead of the = operator. PREDEFINED = __DOXYGEN__ \ - PROGMEM + PROGMEM \ + ATTR_NO_INIT # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index 2c9eaf1de..04f911617 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -139,7 +139,7 @@ * * SECURE_MODE * BootloaderDFU.h - * If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an + * If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an * erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from * being dumped by unauthorized persons. * diff --git a/Bootloaders/DFU/Config/LUFAConfig.h b/Bootloaders/DFU/Config/LUFAConfig.h new file mode 100644 index 000000000..59f67596f --- /dev/null +++ b/Bootloaders/DFU/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 32 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 + #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/DFU/Doxygen.conf b/Bootloaders/DFU/Doxygen.conf index 331b4b417..99c1769ba 100644 --- a/Bootloaders/DFU/Doxygen.conf +++ b/Bootloaders/DFU/Doxygen.conf @@ -1531,7 +1531,8 @@ INCLUDE_FILE_PATTERNS = # instead of the = operator. PREDEFINED = __DOXYGEN__ \ - PROGMEM + PROGMEM \ + ATTR_NO_INIT # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index f78ceb270..a6db90089 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -124,17 +124,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D CONTROL_ONLY_DEVICE -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -179,7 +169,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Bootloaders/HID/Config/LUFAConfig.h b/Bootloaders/HID/Config/LUFAConfig.h new file mode 100644 index 000000000..15ab0599f --- /dev/null +++ b/Bootloaders/HID/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index bfefbf695..b0ae6d6d9 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -122,17 +122,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_RAM_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_SELF_POWER -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_SOF_EVENTS +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -176,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/LUFA.pnproj b/LUFA.pnproj index 16ad85f30..be76ad960 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From 926a83bbc12cc09e026a51b173007dc7cda16117 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 10 May 2012 20:11:47 +0000 Subject: AppConfigHeaders: Update several user projects to use configuration header files, rather than makefile defines. --- Bootloaders/CDC/Config/AppConfig.h | 3 - LUFA.pnproj | 2 +- Projects/AVRISP-MKII/AVRISP-MKII.h | 1 + Projects/AVRISP-MKII/AVRISP-MKII.txt | 30 ++++----- Projects/AVRISP-MKII/Config/AppConfig.h | 64 ++++++++++++++++++ Projects/AVRISP-MKII/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++ Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h | 3 +- Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h | 3 +- Projects/AVRISP-MKII/Lib/V2Protocol.h | 3 +- Projects/AVRISP-MKII/Lib/V2ProtocolParams.h | 3 +- Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h | 3 +- Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h | 3 +- Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h | 3 +- Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h | 3 +- Projects/AVRISP-MKII/makefile | 29 +------- Projects/Benito/Benito.h | 1 + Projects/Benito/Benito.txt | 14 ++-- Projects/Benito/Config/AppConfig.h | 56 ++++++++++++++++ Projects/Benito/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++ Projects/Benito/makefile | 19 +----- Projects/HIDReportViewer/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++ Projects/HIDReportViewer/makefile | 5 +- Projects/LEDNotifier/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++ Projects/LEDNotifier/makefile | 10 +-- Projects/Magstripe/Config/AppConfig.h | 57 ++++++++++++++++ Projects/Magstripe/Config/LUFAConfig.h | 93 ++++++++++++++++++++++++++ Projects/Magstripe/Lib/MagstripeHW.h | 1 + Projects/Magstripe/Magstripe.h | 1 + Projects/Magstripe/Magstripe.txt | 20 +++--- Projects/Magstripe/makefile | 21 +----- 30 files changed, 705 insertions(+), 118 deletions(-) create mode 100644 Projects/AVRISP-MKII/Config/AppConfig.h create mode 100644 Projects/AVRISP-MKII/Config/LUFAConfig.h create mode 100644 Projects/Benito/Config/AppConfig.h create mode 100644 Projects/Benito/Config/LUFAConfig.h create mode 100644 Projects/HIDReportViewer/Config/LUFAConfig.h create mode 100644 Projects/LEDNotifier/Config/LUFAConfig.h create mode 100644 Projects/Magstripe/Config/AppConfig.h create mode 100644 Projects/Magstripe/Config/LUFAConfig.h diff --git a/Bootloaders/CDC/Config/AppConfig.h b/Bootloaders/CDC/Config/AppConfig.h index 9f9b1ce25..6baadf9ad 100644 --- a/Bootloaders/CDC/Config/AppConfig.h +++ b/Bootloaders/CDC/Config/AppConfig.h @@ -43,11 +43,8 @@ #define _APP_CONFIG_H_ // #define NO_BLOCK_SUPPORT - // #define NO_EEPROM_BYTE_SUPPORT - // #define NO_FLASH_BYTE_SUPPORT - // #define NO_LOCK_BYTE_WRITE_SUPPORT #endif \ No newline at end of file diff --git a/LUFA.pnproj b/LUFA.pnproj index be76ad960..d616383cd 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h index 217030524..e7b418418 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.h +++ b/Projects/AVRISP-MKII/AVRISP-MKII.h @@ -52,6 +52,7 @@ #include "Descriptors.h" #include "Lib/V2Protocol.h" + #include "Config/AppConfig.h" /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt index ad58dab1f..a933f386a 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.txt +++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt @@ -214,60 +214,60 @@ * * * AUX_LINE_PORT - * Makefile LUFA_OPTS + * AppConfig.h * PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_PIN - * Makefile LUFA_OPTS + * AppConfig.h * PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_DDR - * Makefile LUFA_OPTS + * AppConfig.h * DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. * \n \n Ignored when compiled for the XPLAIN board. * * * AUX_LINE_MASK - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the programmer's AUX target line. The use of this line varies between the programming protocols, * but is generally used for the target's /RESET line. Must not be the AVR's /SS pin. * \n \n Ignored when compiled for the XPLAIN board. * * * VTARGET_ADC_CHANNEL - * Makefile LUFA_OPTS + * AppConfig.h * ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined. * \n \n Ignored when compiled for targets lacking an ADC. * * * ENABLE_ISP_PROTOCOL - * Makefile LUFA_OPTS + * AppConfig.h * Define to enable SPI programming protocol support. * \n \n Ignored when compiled for the XPLAIN board. * * * ENABLE_XPROG_PROTOCOL - * Makefile LUFA_OPTS + * AppConfig.h * Define to enable PDI and TPI programming protocol support. * \n \n Ignored when compiled for the XPLAIN board. * * * NO_VTARGET_DETECT - * Makefile LUFA_OPTS + * AppConfig.h * Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer * to report a fixed 3.3V target voltage to the host regardless of the real target voltage. * \n \n Ignored when compiled for targets lacking an ADC. * * * VTARGET_REF_VOLTS - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply * voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage * to the ADC. @@ -275,14 +275,14 @@ * * * VTARGET_USE_INTERNAL_REF - * Makefile LUFA_OPTS + * AppConfig.h * Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will * override the VTARGET_REF_VOLTS configuration option. * \n \n Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined. * * * VTARGET_SCALE_FACTOR - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the * ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be * measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set @@ -291,25 +291,25 @@ * * * LIBUSB_DRIVER_COMPAT - * Makefile LUFA_OPTS + * AppConfig.h * Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * * * XCK_RESCUE_CLOCK_ENABLE - * Makefile LUFA_OPTS + * AppConfig.h * Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming * hardware that does not expose the OCR1A pin of the AVR, but may cause some issues with PDI programming mode. * * * INVERTED_ISP_MISO - * Makefile LUFA_OPTS + * AppConfig.h * Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used, * if the translator hardware inverts the received logic level. * * * FIRMWARE_VERSION_MINOR - * Makefile LUFA_OPTS + * AppConfig.h * Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here. * diff --git a/Projects/AVRISP-MKII/Config/AppConfig.h b/Projects/AVRISP-MKII/Config/AppConfig.h new file mode 100644 index 000000000..88ed41f9a --- /dev/null +++ b/Projects/AVRISP-MKII/Config/AppConfig.h @@ -0,0 +1,64 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUX_LINE_PORT PORTB + #define AUX_LINE_PIN PINB + #define AUX_LINE_DDR DDRB + #define AUX_LINE_MASK (1 << 4) + + #define ENABLE_ISP_PROTOCOL + #define ENABLE_XPROG_PROTOCOL + + #define VTARGET_ADC_CHANNEL 2 + #define VTARGET_REF_VOLTS 5 + #define VTARGET_SCALE_FACTOR 1 +// #define VTARGET_USE_INTERNAL_REF +// #define NO_VTARGET_DETECT +// #define XCK_RESCUE_CLOCK_ENABLE +// #define INVERTED_ISP_MISO + +// #define LIBUSB_DRIVER_COMPAT +// #define FIRMWARE_VERSION_MINOR 0x11 + +#endif \ No newline at end of file diff --git a/Projects/AVRISP-MKII/Config/LUFAConfig.h b/Projects/AVRISP-MKII/Config/LUFAConfig.h new file mode 100644 index 000000000..0a7ca2a3c --- /dev/null +++ b/Projects/AVRISP-MKII/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 16 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h index 4ad526390..7f65e46b4 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h @@ -43,7 +43,8 @@ #include #include "../V2Protocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h index 9124b1a6b..25d9720cf 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h @@ -45,7 +45,8 @@ #include #include "../V2ProtocolParams.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.h b/Projects/AVRISP-MKII/Lib/V2Protocol.h index dca97cb2a..0032dec6d 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.h +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.h @@ -48,7 +48,8 @@ #include "V2ProtocolParams.h" #include "ISP/ISPProtocol.h" #include "XPROG/XPROGProtocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h index ab47664d3..55cb64dd9 100644 --- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h +++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h @@ -49,7 +49,8 @@ #include "V2Protocol.h" #include "V2ProtocolConstants.h" #include "ISP/ISPTarget.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Parameter privilege mask to allow the host PC to read the parameter's value. */ #define PARAM_PRIV_READ (1 << 0) diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h index c028321b0..696e5f5b8 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h @@ -45,7 +45,8 @@ #include "XPROGProtocol.h" #include "XPROGTarget.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h index a8704df3c..2789d0217 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h @@ -45,7 +45,8 @@ #include "XPROGProtocol.h" #include "XPROGTarget.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h index 605653588..2d99d5656 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h @@ -46,7 +46,8 @@ #include "../V2Protocol.h" #include "XMEGANVM.h" #include "TINYNVM.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) /* On the XPLAIN board, we only need PDI programming diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h index 09c6ee587..2df1e38a1 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h @@ -45,7 +45,8 @@ #include "../V2Protocol.h" #include "XPROGProtocol.h" - + #include "Config/AppConfig.h" + /* Preprocessor Checks: */ #if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) #undef ENABLE_ISP_PROTOCOL diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile index dbc38cae9..d0c2567fe 100644 --- a/Projects/AVRISP-MKII/makefile +++ b/Projects/AVRISP-MKII/makefile @@ -120,32 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_INTERNAL_SERIAL -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_DEVICE_SELF_POWER - -LUFA_OPTS += -D AUX_LINE_PORT=PORTB -LUFA_OPTS += -D AUX_LINE_PIN=PINB -LUFA_OPTS += -D AUX_LINE_DDR=DDRB -LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D ENABLE_ISP_PROTOCOL -LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL -LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2 -LUFA_OPTS += -D VTARGET_REF_VOLTS=5 -LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1 -#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF -#LUFA_OPTS += -D NO_VTARGET_DETECT -#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT -#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE -#LUFA_OPTS += -D INVERTED_ISP_MISO -#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -197,7 +172,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Benito/Benito.h b/Projects/Benito/Benito.h index 9b91c7c40..184c17385 100644 --- a/Projects/Benito/Benito.h +++ b/Projects/Benito/Benito.h @@ -42,6 +42,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt index f1a4f6acd..bfa707a6f 100644 --- a/Projects/Benito/Benito.txt +++ b/Projects/Benito/Benito.txt @@ -68,37 +68,37 @@ * * * AVR_RESET_LINE_PORT - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the PORT register of the pin used to generate the target /RESET line pulse. * * * AVR_RESET_LINE_DDR - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the DDR register of the pin used to generate the target /RESET line pulse. * * * AVR_RESET_LINE_MASK - * Makefile LUFA_OPTS + * AppConfig.h * Indicates the mask of the pin used to generate the target /RESET line pulse. * * * AVR_RESET_PULSE_MS - * Makefile LUFA_OPTS + * AppConfig.h * Pulse length in milliseconds for the target /RESET pulse. * * * TX_RX_LED_PULSE_MS - * Makefile LUFA_OPTS + * AppConfig.h * Pulse length in milliseconds for the activity Tx/Rx LEDs. * * * PING_PONG_LED_PULSE_MS - * Makefile LUFA_OPTS + * AppConfig.h * Pulse length in milliseconds for the enumeration LED ping-ponging between toggles. * * * RECEIVE_BUFFER_FLUSH_MS - * Makefile LUFA_OPTS + * AppConfig.h * Period between flushings of received data buffer to the attached USB host. * * diff --git a/Projects/Benito/Config/AppConfig.h b/Projects/Benito/Config/AppConfig.h new file mode 100644 index 000000000..c3aeb54d7 --- /dev/null +++ b/Projects/Benito/Config/AppConfig.h @@ -0,0 +1,56 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AVR_RESET_LINE_PORT PORTD + #define AVR_RESET_LINE_DDR DDRD + #define AVR_RESET_LINE_MASK (1 << 4) + + #define AVR_RESET_PULSE_MS 10 + + #define TX_RX_LED_PULSE_MS 30 + #define PING_PONG_LED_PULSE_MS 100 + + #define RECEIVE_BUFFER_FLUSH_MS 10 + +#endif \ No newline at end of file diff --git a/Projects/Benito/Config/LUFAConfig.h b/Projects/Benito/Config/LUFAConfig.h new file mode 100644 index 000000000..3921cd684 --- /dev/null +++ b/Projects/Benito/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile index d397d10af..86b875d49 100644 --- a/Projects/Benito/makefile +++ b/Projects/Benito/makefile @@ -120,22 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -LUFA_OPTS += -D AVR_RESET_LINE_PORT="PORTD" -LUFA_OPTS += -D AVR_RESET_LINE_DDR="DDRD" -LUFA_OPTS += -D AVR_RESET_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D AVR_RESET_PULSE_MS=10 -LUFA_OPTS += -D TX_RX_LED_PULSE_MS=30 -LUFA_OPTS += -D PING_PONG_LED_PULSE_MS=100 -LUFA_OPTS += -D RECEIVE_BUFFER_FLUSH_MS=10 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -180,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/HIDReportViewer/Config/LUFAConfig.h b/Projects/HIDReportViewer/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Projects/HIDReportViewer/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/HIDReportViewer/makefile b/Projects/HIDReportViewer/makefile index 4894b2f7c..4af54e32d 100644 --- a/Projects/HIDReportViewer/makefile +++ b/Projects/HIDReportViewer/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/LEDNotifier/Config/LUFAConfig.h b/Projects/LEDNotifier/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/LEDNotifier/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile index 4ccd01ed6..d11ed0af7 100644 --- a/Projects/LEDNotifier/makefile +++ b/Projects/LEDNotifier/makefile @@ -120,13 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Magstripe/Config/AppConfig.h b/Projects/Magstripe/Config/AppConfig.h new file mode 100644 index 000000000..3fe5456f0 --- /dev/null +++ b/Projects/Magstripe/Config/AppConfig.h @@ -0,0 +1,57 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MAG_T1_CLOCK (1 << 0) + #define MAG_T1_DATA (1 << 1) + #define MAG_T2_CLOCK (1 << 2) + #define MAG_T2_DATA (1 << 3) + #define MAG_T3_CLOCK (1 << 4) + #define MAG_T3_DATA (1 << 5) + #define MAG_CARDPRESENT (1 << 6) + + #define MAG_PORT PORTC + #define MAG_PIN PINC + #define MAG_DDR DDRC + +#endif \ No newline at end of file diff --git a/Projects/Magstripe/Config/LUFAConfig.h b/Projects/Magstripe/Config/LUFAConfig.h new file mode 100644 index 000000000..095bac919 --- /dev/null +++ b/Projects/Magstripe/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h index ef5e90849..177e26b01 100644 --- a/Projects/Magstripe/Lib/MagstripeHW.h +++ b/Projects/Magstripe/Lib/MagstripeHW.h @@ -65,6 +65,7 @@ #include #include + #include "Config/AppConfig.h" /* Private Interface - For use in library only: */ /* Macros: */ diff --git a/Projects/Magstripe/Magstripe.h b/Projects/Magstripe/Magstripe.h index 6e73dcb5b..c7e9d0525 100644 --- a/Projects/Magstripe/Magstripe.h +++ b/Projects/Magstripe/Magstripe.h @@ -46,6 +46,7 @@ #include "Descriptors.h" #include "Lib/MagstripeHW.h" #include "Lib/CircularBitBuffer.h" + #include "Config/AppConfig.h" #include #include diff --git a/Projects/Magstripe/Magstripe.txt b/Projects/Magstripe/Magstripe.txt index 34825ae65..d26b0edcd 100644 --- a/Projects/Magstripe/Magstripe.txt +++ b/Projects/Magstripe/Magstripe.txt @@ -110,52 +110,52 @@ * * * MAG_T1_CLOCK - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's CLOCK line for the reader's track 1 output. * * * MAG_T1_DATA - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's DATA line for the reader's track 1 output. * * * MAG_T2_CLOCK - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's CLOCK line for the reader's track 2 output. * * * MAG_T2_DATA - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's DATA line for the reader's track 2 output. * * * MAG_T3_CLOCK - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's CLOCK line for the reader's track 3 output. * * * MAG_T3_DATA - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's DATA line for the reader's track 3 output. * * * MAG_CARDPRESENT - * Makefile LUFA_OPTS + * AppConfig.h * Mask for the magnetic card reader's card detection output. * * * MAG_PIN - * Makefile LUFA_OPTS + * AppConfig.h * PIN register that the magnetic card reader device is attached to. * * * MAG_PORT - * Makefile LUFA_OPTS + * AppConfig.h * PORT register that the magnetic card reader device is attached to. * * * MAG_DDR - * Makefile LUFA_OPTS + * AppConfig.h * DDR register that the magnetic card reader device is attached to. * * diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile index cbf2197b7..fda76eb25 100644 --- a/Projects/Magstripe/makefile +++ b/Projects/Magstripe/makefile @@ -120,24 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MAG_T1_CLOCK="(1 << 0)" -LUFA_OPTS += -D MAG_T1_DATA="(1 << 1)" -LUFA_OPTS += -D MAG_T2_CLOCK="(1 << 2)" -LUFA_OPTS += -D MAG_T2_DATA="(1 << 3)" -LUFA_OPTS += -D MAG_T3_CLOCK="(1 << 4)" -LUFA_OPTS += -D MAG_T3_DATA="(1 << 5)" -LUFA_OPTS += -D MAG_CARDPRESENT="(1 << 6)" -LUFA_OPTS += -D MAG_PIN=PINB -LUFA_OPTS += -D MAG_DDR=DDRB -LUFA_OPTS += -D MAG_PORT=PORTB +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -183,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. -- cgit v1.2.3 From 33d9a75b0332ded9cebc1388a800922ebe1c3dbe Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 10 May 2012 20:28:39 +0000 Subject: AppConfigHeaders: Update several additional user projects to use configuration header files, rather than makefile defines. --- LUFA.pnproj | 2 +- Projects/MIDIToneGenerator/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/MIDIToneGenerator/makefile | 10 +-- Projects/MediaController/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/MediaController/makefile | 8 +- Projects/MissileLauncher/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/MissileLauncher/makefile | 7 +- Projects/RelayBoard/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/RelayBoard/makefile | 11 +-- Projects/SerialToLCD/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/SerialToLCD/makefile | 11 +-- Projects/TempDataLogger/Config/AppConfig.h | 47 ++++++++++++ Projects/TempDataLogger/Config/LUFAConfig.h | 93 +++++++++++++++++++++++ Projects/TempDataLogger/Lib/DS1307.h | 3 + Projects/TempDataLogger/TempDataLogger.h | 3 +- Projects/TempDataLogger/TemperatureDataLogger.txt | 2 +- Projects/TempDataLogger/makefile | 12 +-- 17 files changed, 624 insertions(+), 50 deletions(-) create mode 100644 Projects/MIDIToneGenerator/Config/LUFAConfig.h create mode 100644 Projects/MediaController/Config/LUFAConfig.h create mode 100644 Projects/MissileLauncher/Config/LUFAConfig.h create mode 100644 Projects/RelayBoard/Config/LUFAConfig.h create mode 100644 Projects/SerialToLCD/Config/LUFAConfig.h create mode 100644 Projects/TempDataLogger/Config/AppConfig.h create mode 100644 Projects/TempDataLogger/Config/LUFAConfig.h diff --git a/LUFA.pnproj b/LUFA.pnproj index d616383cd..03295e5cb 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/MIDIToneGenerator/Config/LUFAConfig.h b/Projects/MIDIToneGenerator/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/MIDIToneGenerator/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MIDIToneGenerator/makefile b/Projects/MIDIToneGenerator/makefile index edca01c9e..8736a5531 100644 --- a/Projects/MIDIToneGenerator/makefile +++ b/Projects/MIDIToneGenerator/makefile @@ -120,13 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/MediaController/Config/LUFAConfig.h b/Projects/MediaController/Config/LUFAConfig.h new file mode 100644 index 000000000..3e9c9b213 --- /dev/null +++ b/Projects/MediaController/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MediaController/makefile b/Projects/MediaController/makefile index a452e021c..bc41bef0f 100644 --- a/Projects/MediaController/makefile +++ b/Projects/MediaController/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/MissileLauncher/Config/LUFAConfig.h b/Projects/MissileLauncher/Config/LUFAConfig.h new file mode 100644 index 000000000..f96994ee9 --- /dev/null +++ b/Projects/MissileLauncher/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ + #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile index d6ac02840..47b83662c 100644 --- a/Projects/MissileLauncher/makefile +++ b/Projects/MissileLauncher/makefile @@ -120,10 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D HOST_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/RelayBoard/Config/LUFAConfig.h b/Projects/RelayBoard/Config/LUFAConfig.h new file mode 100644 index 000000000..c238cc65a --- /dev/null +++ b/Projects/RelayBoard/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 + #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile index 1b8c7f8a9..3fb0ccbb5 100644 --- a/Projects/RelayBoard/makefile +++ b/Projects/RelayBoard/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D CONTROL_ONLY_DEVICE -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/SerialToLCD/Config/LUFAConfig.h b/Projects/SerialToLCD/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/SerialToLCD/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/SerialToLCD/makefile b/Projects/SerialToLCD/makefile index ad66578e9..27ac99a33 100644 --- a/Projects/SerialToLCD/makefile +++ b/Projects/SerialToLCD/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -173,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/TempDataLogger/Config/AppConfig.h b/Projects/TempDataLogger/Config/AppConfig.h new file mode 100644 index 000000000..155a76e05 --- /dev/null +++ b/Projects/TempDataLogger/Config/AppConfig.h @@ -0,0 +1,47 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +// #define DUMMY_RTC + +#endif \ No newline at end of file diff --git a/Projects/TempDataLogger/Config/LUFAConfig.h b/Projects/TempDataLogger/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/TempDataLogger/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/TempDataLogger/Lib/DS1307.h b/Projects/TempDataLogger/Lib/DS1307.h index 0736d8ea5..0ad0a4d92 100644 --- a/Projects/TempDataLogger/Lib/DS1307.h +++ b/Projects/TempDataLogger/Lib/DS1307.h @@ -12,6 +12,8 @@ #include #include + + #include "Config/AppConfig.h" /* Type Defines: */ typedef struct @@ -111,6 +113,7 @@ } DS1307_DateTimeRegs_t; /* Macros: */ + /** TWI address of the DS1307 device on the bus. */ #define DS1307_ADDRESS 0xD0 /* Function Prototypes: */ diff --git a/Projects/TempDataLogger/TempDataLogger.h b/Projects/TempDataLogger/TempDataLogger.h index 08419599e..b9c45fc54 100644 --- a/Projects/TempDataLogger/TempDataLogger.h +++ b/Projects/TempDataLogger/TempDataLogger.h @@ -49,7 +49,8 @@ #include "Lib/DataflashManager.h" #include "Lib/FATFs/ff.h" #include "Lib/DS1307.h" - + #include "Config/AppConfig.h" + #include #include #include diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt index 01a080d87..f416d7b26 100644 --- a/Projects/TempDataLogger/TemperatureDataLogger.txt +++ b/Projects/TempDataLogger/TemperatureDataLogger.txt @@ -77,7 +77,7 @@ * * * DUMMY_RTC - * Makefile LUFA_OPTS + * AppConfig.h * When a DS1307 RTC chip is not fitted, this token can be defined to make the demo assume a 1/1/1 01:01:01 date/time * stamp at all times, effectively transforming the project into a basic data logger with no specified sample times. * diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile index 5d1d0bf4f..5cc168de9 100644 --- a/Projects/TempDataLogger/makefile +++ b/Projects/TempDataLogger/makefile @@ -120,15 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -#LUFA_OPTS += -D DUMMY_RTC +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -180,7 +172,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. -- cgit v1.2.3 From 802910d49f2ac175b06a8ebfbcb61551a171b85a Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 12 May 2012 15:32:53 +0000 Subject: AppConfigHeaders: Update several additional user projects to use configuration header files, rather than makefile defines. Remove compile time warnings for projects lacking device serial support, remove incomplete StandaloneProgrammer project. --- .../ClassDriver/DualVirtualSerial/Descriptors.c | 11 - Demos/Device/ClassDriver/MassStorage/Descriptors.c | 11 - .../ClassDriver/MassStorageKeyboard/Descriptors.c | 11 - .../Device/ClassDriver/VirtualSerial/Descriptors.c | 11 - .../VirtualSerialMassStorage/Descriptors.c | 11 - .../ClassDriver/VirtualSerialMouse/Descriptors.c | 11 - .../Incomplete/TestAndMeasurement/Descriptors.c | 11 - .../LowLevel/DualVirtualSerial/Descriptors.c | 11 - Demos/Device/LowLevel/MassStorage/Descriptors.c | 11 - Demos/Device/LowLevel/VirtualSerial/Descriptors.c | 11 - LUFA.pnproj | 2 +- Projects/AVRISP-MKII/Config/AppConfig.h | 7 +- Projects/Benito/Config/AppConfig.h | 7 +- .../Incomplete/StandaloneProgrammer/Descriptors.c | 224 ---- .../Incomplete/StandaloneProgrammer/Descriptors.h | 91 -- .../Incomplete/StandaloneProgrammer/DiskDevice.c | 108 -- .../Incomplete/StandaloneProgrammer/DiskDevice.h | 61 -- .../Incomplete/StandaloneProgrammer/DiskHost.c | 124 --- .../Incomplete/StandaloneProgrammer/DiskHost.h | 62 -- .../StandaloneProgrammer/Lib/DataflashManager.c | 536 ---------- .../StandaloneProgrammer/Lib/DataflashManager.h | 89 -- .../Lib/PetiteFATFs/00readme.txt | 42 - .../StandaloneProgrammer/Lib/PetiteFATFs/diskio.c | 57 - .../StandaloneProgrammer/Lib/PetiteFATFs/diskio.h | 34 - .../StandaloneProgrammer/Lib/PetiteFATFs/integer.h | 38 - .../StandaloneProgrammer/Lib/PetiteFATFs/pff.c | 1114 -------------------- .../StandaloneProgrammer/Lib/PetiteFATFs/pff.h | 193 ---- .../StandaloneProgrammer/Lib/ProgrammerConfig.c | 78 -- .../StandaloneProgrammer/Lib/ProgrammerConfig.h | 45 - .../Incomplete/StandaloneProgrammer/Lib/SCSI.c | 344 ------ .../Incomplete/StandaloneProgrammer/Lib/SCSI.h | 90 -- .../StandaloneProgrammer/Standalone Programmer.inf | 106 -- .../StandaloneProgrammer/StandaloneProgrammer.c | 169 --- .../StandaloneProgrammer/StandaloneProgrammer.h | 89 -- Projects/Incomplete/StandaloneProgrammer/makefile | 738 ------------- Projects/LEDNotifier/Descriptors.c | 11 - Projects/Magstripe/Config/AppConfig.h | 7 +- Projects/SerialToLCD/Descriptors.c | 11 - Projects/TempDataLogger/Config/AppConfig.h | 7 +- Projects/TempDataLogger/Descriptors.c | 11 - Projects/USBtoSerial/Config/LUFAConfig.h | 93 ++ Projects/USBtoSerial/Descriptors.c | 11 - Projects/USBtoSerial/makefile | 11 +- Projects/Webserver/Config/AppConfig.h | 68 ++ Projects/Webserver/Config/LUFAConfig.h | 93 ++ Projects/Webserver/Descriptors.c | 11 - Projects/Webserver/Lib/DHCPClientApp.c | 4 +- Projects/Webserver/Lib/DHCPClientApp.h | 1 + Projects/Webserver/Lib/DHCPCommon.c | 4 +- Projects/Webserver/Lib/DHCPCommon.h | 2 + Projects/Webserver/Lib/DHCPServerApp.c | 4 +- Projects/Webserver/Lib/DHCPServerApp.h | 1 + Projects/Webserver/Lib/HTTPServerApp.h | 2 + Projects/Webserver/Lib/TELNETServerApp.c | 4 +- Projects/Webserver/Lib/TELNETServerApp.h | 2 + Projects/Webserver/Lib/uip/uipopt.h | 2 + Projects/Webserver/Webserver.txt | 8 +- Projects/Webserver/makefile | 31 +- Projects/XPLAINBridge/Config/AppConfig.h | 64 ++ Projects/XPLAINBridge/Config/LUFAConfig.h | 93 ++ Projects/XPLAINBridge/USARTDescriptors.c | 11 - Projects/XPLAINBridge/XPLAINBridge.h | 1 + Projects/XPLAINBridge/XPLAINBridge.txt | 4 +- Projects/XPLAINBridge/makefile | 22 +- 64 files changed, 459 insertions(+), 4693 deletions(-) delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Descriptors.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Descriptors.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/DiskDevice.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/DiskDevice.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/DiskHost.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/DiskHost.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf delete mode 100644 Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c delete mode 100644 Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h delete mode 100644 Projects/Incomplete/StandaloneProgrammer/makefile create mode 100644 Projects/USBtoSerial/Config/LUFAConfig.h create mode 100644 Projects/Webserver/Config/AppConfig.h create mode 100644 Projects/Webserver/Config/LUFAConfig.h create mode 100644 Projects/XPLAINBridge/Config/AppConfig.h create mode 100644 Projects/XPLAINBridge/Config/LUFAConfig.h diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c index 1a4860ad3..a183b7fcb 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/Demos/Device/ClassDriver/MassStorage/Descriptors.c index 5c62f7fb1..36774e804 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c index 6818a7acb..c5d92015e 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c @@ -38,17 +38,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** HID class report descriptor. This is a special descriptor constructed with values from the * USBIF HID class specification to describe the reports and capabilities of the HID device. This diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c index 9dcf4e4d4..0a11dcb79 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c index cfccac02b..607a2b02d 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c index 999712185..3fb00a1a1 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** HID class report descriptor. This is a special descriptor constructed with values from the * USBIF HID class specification to describe the reports and capabilities of the HID device. This diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c index bf16ab08a..31a615414 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -38,17 +38,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c index 1a4860ad3..a183b7fcb 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.c b/Demos/Device/LowLevel/MassStorage/Descriptors.c index 5c62f7fb1..36774e804 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.c +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c index 9dcf4e4d4..0a11dcb79 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/LUFA.pnproj b/LUFA.pnproj index 03295e5cb..e7fecddf8 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/AVRISP-MKII/Config/AppConfig.h b/Projects/AVRISP-MKII/Config/AppConfig.h index 88ed41f9a..b7598a51c 100644 --- a/Projects/AVRISP-MKII/Config/AppConfig.h +++ b/Projects/AVRISP-MKII/Config/AppConfig.h @@ -31,9 +31,10 @@ /** \file * \brief Application Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. * * For information on what each token does, refer to the * \ref Sec_Options section of the application documentation. diff --git a/Projects/Benito/Config/AppConfig.h b/Projects/Benito/Config/AppConfig.h index c3aeb54d7..ce511ebbe 100644 --- a/Projects/Benito/Config/AppConfig.h +++ b/Projects/Benito/Config/AppConfig.h @@ -31,9 +31,10 @@ /** \file * \brief Application Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. * * For information on what each token does, refer to the * \ref Sec_Options section of the application documentation. diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c b/Projects/Incomplete/StandaloneProgrammer/Descriptors.c deleted file mode 100644 index 61176e607..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. - */ - -#include "Descriptors.h" - -#if defined(USB_CAN_BE_DEVICE) - -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif - -/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall - * device characteristics, including the supported USB version, control endpoint size and the - * number of device configurations. The descriptor is read out by the USB host when the enumeration - * process begins. - */ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(01.10), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - .VendorID = 0x03EB, - .ProductID = 0x2063, - .ReleaseNumber = VERSION_BCD(00.01), - - .ManufacturerStrIndex = 0x01, - .ProductStrIndex = 0x02, - .SerialNumStrIndex = USE_INTERNAL_SERIAL, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage - * of the device in one of its supported configurations, including information about any device interfaces - * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting - * a configuration so that the host may correctly communicate with the USB device. - */ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = 1, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - .MS_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = 0, - .AlternateSetting = 0, - - .TotalEndpoints = 2, - - .Class = MS_CSCP_MassStorageClass, - .SubClass = MS_CSCP_SCSITransparentSubclass, - .Protocol = MS_CSCP_BulkOnlyTransportProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .MS_DataInEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = MASS_STORAGE_IN_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x05 - }, - - .MS_DataOutEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = MASS_STORAGE_OUT_EPADDR, - .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MASS_STORAGE_IO_EPSIZE, - .PollingIntervalMS = 0x05 - } -}; - -/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests - * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate - * via the language ID table available at USB.org what languages the device supports for its string descriptors. - */ -const USB_Descriptor_String_t PROGMEM LanguageString = -{ - .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - - .UnicodeString = {LANGUAGE_ID_ENG} -}; - -/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable - * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ManufacturerString = -{ - .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - - .UnicodeString = L"Dean Camera" -}; - -/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, - * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device - * Descriptor. - */ -const USB_Descriptor_String_t PROGMEM ProductString = -{ - .Header = {.Size = USB_STRING_LEN(26), .Type = DTYPE_String}, - - .UnicodeString = L"LUFA Standalone Programmer" -}; - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorNumber = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorNumber) - { - case 0x00: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case 0x01: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case 0x02: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - - break; - } - - *DescriptorAddress = Address; - return Size; -} - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h b/Projects/Incomplete/StandaloneProgrammer/Descriptors.h deleted file mode 100644 index c0e8f46d7..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Descriptors.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - - /* Includes: */ - #include - - #include - - /* Macros: */ - /** Endpoint address of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 5) - - /** Endpoint address of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) - - /** Endpoint address of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPADDR (ENDPOINT_DIR_OUT | 2) - - /** Size in bytes of the CDC device-to-host notification IN endpoint. */ - #define CDC_NOTIFICATION_EPSIZE 8 - - /** Size in bytes of the CDC data IN and OUT endpoints. */ - #define CDC_TXRX_EPSIZE 16 - - /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) - - /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) - - /** Size in bytes of the Mass Storage data endpoints. */ - #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ - /** Type define for the device configuration descriptor structure. This must be defined in the - * application code, as the configuration descriptor contains several sub-descriptors which - * vary between devices, and which describe the device's usage to the host. - */ - typedef struct - { - USB_Descriptor_Configuration_Header_t Config; - - // Mass Storage Interface - USB_Descriptor_Interface_t MS_Interface; - USB_Descriptor_Endpoint_t MS_DataInEndpoint; - USB_Descriptor_Endpoint_t MS_DataOutEndpoint; - } USB_Descriptor_Configuration_t; - - /* Function Prototypes: */ - uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c deleted file mode 100644 index 73bf5545a..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "DiskDevice.h" - -#if defined(USB_CAN_BE_DEVICE) -/** LUFA Mass Storage Class driver interface configuration and state information. This structure is - * passed to all Mass Storage Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_MS_Device_t DiskDevice_MS_Interface = - { - .Config = - { - .InterfaceNumber = 0, - .DataINEndpoint = - { - .Address = MASS_STORAGE_IN_EPADDR, - .Size = MASS_STORAGE_IO_EPSIZE, - .Banks = 1, - }, - .DataOUTEndpoint = - { - .Address = MASS_STORAGE_OUT_EPADDR, - .Size = MASS_STORAGE_IO_EPSIZE, - .Banks = 1, - }, - .TotalLUNs = 1, - }, - }; - - -void DiskDevice_USBTask(void) -{ - MS_Device_USBTask(&DiskDevice_MS_Interface); -} - -/** Event handler for the library USB Connection event. */ -void EVENT_USB_Device_Connect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the library USB Disconnection event. */ -void EVENT_USB_Device_Disconnect(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the library USB Configuration Changed event. */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool ConfigSuccess = true; - - ConfigSuccess &= MS_Device_ConfigureEndpoints(&DiskDevice_MS_Interface); - - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); -} - -/** Event handler for the library USB Control Request reception event. */ -void EVENT_USB_Device_ControlRequest(void) -{ - MS_Device_ProcessControlRequest(&DiskDevice_MS_Interface); -} - -/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced - */ -bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess; - - LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); - LEDs_SetAllLEDs(LEDMASK_USB_READY); - - return CommandSuccess; -} -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.h b/Projects/Incomplete/StandaloneProgrammer/DiskDevice.h deleted file mode 100644 index 80eafbe3f..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskDevice.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DiskDevice.c. - */ - -#ifndef _DISK_DEVICE_H_ -#define _DISK_DEVICE_H_ - - /* Includes: */ - #include - - #include "Descriptors.h" - #include "StandaloneProgrammer.h" - - #include - #include - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - void DiskDevice_USBTask(void); - - void EVENT_USB_Device_Connect(void); - void EVENT_USB_Device_Disconnect(void); - void EVENT_USB_Device_ConfigurationChanged(void); - void EVENT_USB_Device_ControlRequest(void); - - bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c b/Projects/Incomplete/StandaloneProgrammer/DiskHost.c deleted file mode 100644 index c93029c06..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "DiskHost.h" - -#if defined(USB_CAN_BE_HOST) -/** LUFA Mass Storage Class driver interface configuration and state information. This structure is - * passed to all Mass Storage Class driver functions, so that multiple instances of the same class - * within a device can be differentiated from one another. - */ -USB_ClassInfo_MS_Host_t DiskHost_MS_Interface = - { - .Config = - { - .DataINPipe = - { - .Address = (PIPE_DIR_IN | 1), - .Banks = 1, - }, - .DataOUTPipe = - { - .Address = (PIPE_DIR_OUT | 2), - .Banks = 1, - }, - }, - }; - - -void DiskHost_USBTask(void) -{ - MS_Host_USBTask(&DiskHost_MS_Interface); -} - -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - - uint16_t ConfigDescriptorSize; - uint8_t ConfigDescriptorData[512]; - - if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, - sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (MS_Host_ConfigurePipes(&DiskHost_MS_Interface, - ConfigDescriptorSize, ConfigDescriptorData) != MS_ENUMERROR_NoError) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - uint8_t MaxLUNIndex; - if (MS_Host_GetMaxLUN(&DiskHost_MS_Interface, &MaxLUNIndex)) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - if (MS_Host_ResetMSInterface(&DiskHost_MS_Interface)) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - SCSI_Request_Sense_Response_t SenseData; - if (MS_Host_RequestSense(&DiskHost_MS_Interface, 0, &SenseData) != 0) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - pf_mount(&DiskFATState); - - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -void EVENT_USB_Host_DeviceAttached(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -void EVENT_USB_Host_DeviceUnattached(void) -{ - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/DiskHost.h b/Projects/Incomplete/StandaloneProgrammer/DiskHost.h deleted file mode 100644 index 1f8ed212c..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/DiskHost.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DiskHost.c. - */ - -#ifndef _DISK_HOST_H_ -#define _DISK_HOST_H_ - - /* Includes: */ - #include - - #include "Descriptors.h" - #include "StandaloneProgrammer.h" - - #include - #include - - /* External Variables: */ - #if defined(USB_CAN_BE_HOST) - extern USB_ClassInfo_MS_Host_t DiskHost_MS_Interface; - #endif - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_HOST) - void DiskHost_USBTask(void); - - void EVENT_USB_Host_DeviceAttached(void); - void EVENT_USB_Host_DeviceUnattached(void); - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c deleted file mode 100644 index efaf8b096..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Functions to manage the physical Dataflash media, including reading and writing of - * blocks of data. These functions are called by the SCSI layer when data must be stored - * or retrieved to/from the physical storage media. If a different media is used (such - * as a SD card or EEPROM), functions similar to these will need to be generated. - */ - -#define INCLUDE_FROM_DATAFLASHMANAGER_C -#include "DataflashManager.h" - -#if defined(USB_CAN_BE_DEVICE) -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes - * them to the Dataflash in Dataflash page sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - */ -void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently empty */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the current endpoint bank */ - Endpoint_ClearOUT(); - - /* Wait until the host has sent another packet */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* If the endpoint is empty, clear it ready for the next packet from the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearOUT(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the endpoint. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - */ -void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently full */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the endpoint bank to send its contents to the host */ - Endpoint_ClearIN(); - - /* Wait until the endpoint is ready for more data */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* If the endpoint is full, send its contents to the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearIN(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the - * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the - * Dataflash. - * - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - * \param[in] BufferPtr Pointer to the data source RAM buffer - */ -void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - const uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_ToggleSelectedChipCS(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - Dataflash_SendByte(*(BufferPtr++)); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read - * the files stored on the Dataflash. - * - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - * \param[out] BufferPtr Pointer to the data destination RAM buffer - */ -void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - *(BufferPtr++) = Dataflash_ReceiveByte(); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ -void DataflashManager_ResetDataflashProtections(void) -{ - /* Select first Dataflash chip, send the read status register command */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - - /* Select second Dataflash chip (if present on selected board), send read status register command */ - #if (DATAFLASH_TOTALCHIPS == 2) - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - #endif - - /* Deselect current Dataflash chip */ - Dataflash_DeselectChip(); -} - -/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. - * - * \return Boolean true if all media chips are working, false otherwise - */ -bool DataflashManager_CheckDataflashOperation(void) -{ - uint8_t ReturnByte; - - /* Test first Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - - #if (DATAFLASH_TOTALCHIPS == 2) - /* Test second Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - #endif - - return true; -} -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h b/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h deleted file mode 100644 index d353477da..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/DataflashManager.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DataflashManager.c. - */ - -#ifndef _DATAFLASH_MANAGER_H_ -#define _DATAFLASH_MANAGER_H_ - - /* Includes: */ - #include - - #include "../StandaloneProgrammer.h" - #include "../Descriptors.h" - - #include - #include - - /* Preprocessor Checks: */ - #if (DATAFLASH_PAGE_SIZE % 16) - #error Dataflash page size must be a multiple of 16 bytes. - #endif - - /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more dataflash ICs. */ - #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) - - /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying - * storage media (Dataflash) using a different native block size. Do not change this value. - */ - #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - - /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not - * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. - */ - #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - const uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ResetDataflashProtections(void); - bool DataflashManager_CheckDataflashOperation(void); - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt deleted file mode 100644 index 26816072d..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/00readme.txt +++ /dev/null @@ -1,42 +0,0 @@ -Petit FatFs Module Source Files R0.02a (C)ChaN, 2010 - - -FILES - - pff.h Common include file for Petit FatFs and application module. - pff.c Petit FatFs module. - diskio.h Common include file for Petit FatFs and disk I/O module. - diskio.c Skeleton of low level disk I/O module. - integer.h Alternative type definitions for integer variables. - - Low level disk I/O module is not included in this archive because the Petit - FatFs module is only a generic file system layer and not depend on any - specific storage device. You have to provide a low level disk I/O module that - written to control your storage device. - - - -AGREEMENTS - - Petit FatFs module is an open source software to implement FAT file system to - small embedded systems. This is a free software and is opened for education, - research and commercial developments under license policy of following trems. - - Copyright (C) 2010, ChaN, all right reserved. - - * The Petit FatFs module is a free software and there is NO WARRANTY. - * No restriction on use. You can use, modify and redistribute it for - personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. - * Redistributions of source code must retain the above copyright notice. - - - -REVISION HISTORY - - Jun 15, 2009 R0.01a First release (Branched from FatFs R0.07b) - Dec 14, 2009 R0.02 Added multiple code page support. - Added write funciton. - Changed stream read mode interface. - Dec 07,'2010 R0.02a Added some configuration options. - Fixed fails to open objects with DBCS character. - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c deleted file mode 100644 index d953875a2..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.c +++ /dev/null @@ -1,57 +0,0 @@ -/*-----------------------------------------------------------------------*/ -/* Low level disk I/O module skeleton for Petit FatFs (C)ChaN, 2009 */ -/*-----------------------------------------------------------------------*/ - -#include "diskio.h" - -#include -#include -#include "../DataflashManager.h" -#include "../../DiskHost.h" - -/*-----------------------------------------------------------------------*/ -/* Initialize Disk Drive */ -/*-----------------------------------------------------------------------*/ - -DSTATUS disk_initialize (void) -{ - return RES_OK; -} - - - -/*-----------------------------------------------------------------------*/ -/* Read Partial Sector */ -/*-----------------------------------------------------------------------*/ - -DRESULT disk_readp ( - BYTE* dest, /* Pointer to the destination object */ - DWORD sector, /* Sector number (LBA) */ - WORD sofs, /* Offset in the sector */ - WORD count /* Byte count (bit15:destination) */ -) -{ - DRESULT ErrorCode = RES_OK; - uint8_t BlockTemp[512]; - - if (USB_CurrentMode == USB_MODE_Host) - { - #if defined(USB_CAN_BE_HOST) - if (USB_HostState != HOST_STATE_Configured) - ErrorCode = RES_NOTRDY; - else if (MS_Host_ReadDeviceBlocks(&DiskHost_MS_Interface, 0, sector, 1, 512, BlockTemp)) - ErrorCode = RES_ERROR; - #endif - } - else - { - #if defined(USB_CAN_BE_DEVICE) - DataflashManager_ReadBlocks_RAM(sector, 1, BlockTemp); - #endif - } - - memcpy(dest, &BlockTemp[sofs], count); - - return ErrorCode; -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h deleted file mode 100644 index 239d45913..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/diskio.h +++ /dev/null @@ -1,34 +0,0 @@ -/*----------------------------------------------------------------------- -/ PFF - Low level disk interface module include file (C)ChaN, 2010 -/-----------------------------------------------------------------------*/ - -#ifndef _DISKIO - -#include "integer.h" - - -/* Status of Disk Functions */ -typedef BYTE DSTATUS; - - -/* Results of Disk Functions */ -typedef enum { - RES_OK = 0, /* 0: Function succeeded */ - RES_ERROR, /* 1: Disk error */ - RES_NOTRDY, /* 2: Not ready */ - RES_PARERR /* 3: Invalid parameter */ -} DRESULT; - - -/*---------------------------------------*/ -/* Prototypes for disk control functions */ - -DSTATUS disk_initialize (void); -DRESULT disk_readp (BYTE*, DWORD, WORD, WORD); - -#define STA_NOINIT 0x01 /* Drive not initialized */ -#define STA_NODISK 0x02 /* No medium in the drive */ - -#define _DISKIO -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h deleted file mode 100644 index 5408fe6b3..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/integer.h +++ /dev/null @@ -1,38 +0,0 @@ -/*-------------------------------------------*/ -/* Integer type definitions for FatFs module */ -/*-------------------------------------------*/ - -#ifndef _INTEGER -#define _INTEGER - -#ifdef _WIN32 /* FatFs development platform */ - -#include -#include - -#else /* Embedded platform */ - -/* These types must be 16-bit, 32-bit or larger integer */ -typedef int INT; -typedef unsigned int UINT; - -/* These types must be 8-bit integer */ -typedef char CHAR; -typedef unsigned char UCHAR; -typedef unsigned char BYTE; - -/* These types must be 16-bit integer */ -typedef short SHORT; -typedef unsigned short USHORT; -typedef unsigned short WORD; -typedef unsigned short WCHAR; - -/* These types must be 32-bit integer */ -typedef long LONG; -typedef unsigned long ULONG; -typedef unsigned long DWORD; - -#endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c deleted file mode 100644 index 29e44f620..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.c +++ /dev/null @@ -1,1114 +0,0 @@ -/*----------------------------------------------------------------------------/ -/ Petit FatFs - FAT file system module R0.02a (C)ChaN, 2010 -/-----------------------------------------------------------------------------/ -/ Petit FatFs module is an open source software to implement FAT file system to -/ small embedded systems. This is a free software and is opened for education, -/ research and commercial developments under license policy of following trems. -/ -/ Copyright (C) 2010, ChaN, all right reserved. -/ -/ * The Petit FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/-----------------------------------------------------------------------------/ -/ Jun 15,'09 R0.01a First release. (Branched from FatFs R0.07b.) -/ -/ Dec 14,'09 R0.02 Added multiple code page support. -/ Added write funciton. -/ Changed stream read mode interface. -/ Dec 07,'10 R0.02a Added some configuration options. -/ Fixed fails to open objects with DBCS character. -/----------------------------------------------------------------------------*/ - -#include "pff.h" /* Petit FatFs configurations and declarations */ -#include "diskio.h" /* Declarations of low level disk I/O functions */ - - - -/*-------------------------------------------------------------------------- - - Module Private Definitions - ----------------------------------------------------------------------------*/ - - -#if _FS_FAT32 -#define LD_CLUST(dir) (((DWORD)LD_WORD(dir+DIR_FstClusHI)<<16) | LD_WORD(dir+DIR_FstClusLO)) -#else -#define LD_CLUST(dir) LD_WORD(dir+DIR_FstClusLO) -#endif - - -/*--------------------------------------------------------*/ -/* DBCS code ranges and SBCS extend char conversion table */ - -#if _CODE_PAGE == 932 /* Japanese Shift-JIS */ -#define _DF1S 0x81 /* DBC 1st byte range 1 start */ -#define _DF1E 0x9F /* DBC 1st byte range 1 end */ -#define _DF2S 0xE0 /* DBC 1st byte range 2 start */ -#define _DF2E 0xFC /* DBC 1st byte range 2 end */ -#define _DS1S 0x40 /* DBC 2nd byte range 1 start */ -#define _DS1E 0x7E /* DBC 2nd byte range 1 end */ -#define _DS2S 0x80 /* DBC 2nd byte range 2 start */ -#define _DS2E 0xFC /* DBC 2nd byte range 2 end */ - -#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0x80 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 949 /* Korean */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x41 -#define _DS1E 0x5A -#define _DS2S 0x61 -#define _DS2E 0x7A -#define _DS3S 0x81 -#define _DS3E 0xFE - -#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */ -#define _DF1S 0x81 -#define _DF1E 0xFE -#define _DS1S 0x40 -#define _DS1E 0x7E -#define _DS2S 0xA1 -#define _DS2E 0xFE - -#elif _CODE_PAGE == 437 /* U.S. (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 720 /* Arabic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 737 /* Greek (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \ - 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 775 /* Baltic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF} - -#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \ - 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \ - 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 857 /* Turkish (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \ - 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 862 /* Hebrew (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 866 /* Russian (OEM) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \ - 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF} - -#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1253 /* Greek (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \ - 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF} - -#elif _CODE_PAGE == 1254 /* Turkish (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F} - -#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1256 /* Arabic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF} - -#elif _CODE_PAGE == 1257 /* Baltic (Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \ - 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF} - -#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */ -#define _DF1S 0 -#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \ - 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \ - 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F} - -#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */ -#define _DF1S 0 - -#else -#error Unknown code page - -#endif - - - -/* Character code support macros */ - -#define IsUpper(c) (((c)>='A')&&((c)<='Z')) -#define IsLower(c) (((c)>='a')&&((c)<='z')) - -#if _DF1S /* DBCS configuration */ - -#ifdef _DF2S /* Two 1st byte areas */ -#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E)) -#else /* One 1st byte area */ -#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) -#endif - -#ifdef _DS3S /* Three 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E)) -#else /* Two 2nd byte areas */ -#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E)) -#endif - -#else /* SBCS configuration */ - -#define IsDBCS1(c) 0 -#define IsDBCS2(c) 0 - -#endif /* _DF1S */ - - -/* FatFs refers the members in the FAT structures with byte offset instead -/ of structure member because there are incompatibility of the packing option -/ between various compilers. */ - -#define BS_jmpBoot 0 -#define BS_OEMName 3 -#define BPB_BytsPerSec 11 -#define BPB_SecPerClus 13 -#define BPB_RsvdSecCnt 14 -#define BPB_NumFATs 16 -#define BPB_RootEntCnt 17 -#define BPB_TotSec16 19 -#define BPB_Media 21 -#define BPB_FATSz16 22 -#define BPB_SecPerTrk 24 -#define BPB_NumHeads 26 -#define BPB_HiddSec 28 -#define BPB_TotSec32 32 -#define BS_55AA 510 - -#define BS_DrvNum 36 -#define BS_BootSig 38 -#define BS_VolID 39 -#define BS_VolLab 43 -#define BS_FilSysType 54 - -#define BPB_FATSz32 36 -#define BPB_ExtFlags 40 -#define BPB_FSVer 42 -#define BPB_RootClus 44 -#define BPB_FSInfo 48 -#define BPB_BkBootSec 50 -#define BS_DrvNum32 64 -#define BS_BootSig32 66 -#define BS_VolID32 67 -#define BS_VolLab32 71 -#define BS_FilSysType32 82 - -#define MBR_Table 446 - -#define DIR_Name 0 -#define DIR_Attr 11 -#define DIR_NTres 12 -#define DIR_CrtTime 14 -#define DIR_CrtDate 16 -#define DIR_FstClusHI 20 -#define DIR_WrtTime 22 -#define DIR_WrtDate 24 -#define DIR_FstClusLO 26 -#define DIR_FileSize 28 - - - -/*-------------------------------------------------------------------------- - - Private Functions - ----------------------------------------------------------------------------*/ - - -static -FATFS *FatFs; /* Pointer to the file system object (logical drive) */ - - -/* Fill memory */ -static -void mem_set (void* dst, int val, int cnt) { - char *d = (char*)dst; - while (cnt--) *d++ = (char)val; -} - -/* Compare memory to memory */ -static -int mem_cmp (const void* dst, const void* src, int cnt) { - const char *d = (const char *)dst, *s = (const char *)src; - int r = 0; - while (cnt-- && (r = *d++ - *s++) == 0) ; - return r; -} - - - -/*-----------------------------------------------------------------------*/ -/* FAT access - Read value of a FAT entry */ -/*-----------------------------------------------------------------------*/ - -static -CLUST get_fat ( /* 1:IO error, Else:Cluster status */ - CLUST clst /* Cluster# to get the link information */ -) -{ - WORD wc, bc, ofs; - BYTE buf[4]; - FATFS *fs = FatFs; - - - if (clst < 2 || clst >= fs->n_fatent) /* Range check */ - return 1; - - switch (fs->fs_type) { -#if _FS_FAT12 - case FS_FAT12 : - bc = (WORD)clst; bc += bc / 2; - ofs = bc % 512; bc /= 512; - if (ofs != 511) { - if (disk_readp(buf, fs->fatbase + bc, ofs, 2)) break; - } else { - if (disk_readp(buf, fs->fatbase + bc, 511, 1)) break; - if (disk_readp(buf+1, fs->fatbase + bc + 1, 0, 1)) break; - } - wc = LD_WORD(buf); - return (clst & 1) ? (wc >> 4) : (wc & 0xFFF); -#endif - case FS_FAT16 : - if (disk_readp(buf, fs->fatbase + clst / 256, (WORD)(((WORD)clst % 256) * 2), 2)) break; - return LD_WORD(buf); -#if _FS_FAT32 - case FS_FAT32 : - if (disk_readp(buf, fs->fatbase + clst / 128, (WORD)(((WORD)clst % 128) * 4), 4)) break; - return LD_DWORD(buf) & 0x0FFFFFFF; -#endif - } - - return 1; /* An error occured at the disk I/O layer */ -} - - - - -/*-----------------------------------------------------------------------*/ -/* Get sector# from cluster# */ -/*-----------------------------------------------------------------------*/ - -static -DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */ - CLUST clst /* Cluster# to be converted */ -) -{ - FATFS *fs = FatFs; - - - clst -= 2; - if (clst >= (fs->n_fatent - 2)) return 0; /* Invalid cluster# */ - return (DWORD)clst * fs->csize + fs->database; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Rewind directory index */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_rewind ( - DIR *dj /* Pointer to directory object */ -) -{ - CLUST clst; - FATFS *fs = FatFs; - - - dj->index = 0; - clst = dj->sclust; - if (clst == 1 || clst >= fs->n_fatent) /* Check start cluster range */ - return FR_DISK_ERR; - if (_FS_FAT32 && !clst && fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */ - clst = (CLUST)fs->dirbase; - dj->clust = clst; /* Current cluster */ - dj->sect = clst ? clust2sect(clst) : fs->dirbase; /* Current sector */ - - return FR_OK; /* Seek succeeded */ -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Move directory index next */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table */ - DIR *dj /* Pointer to directory object */ -) -{ - CLUST clst; - WORD i; - FATFS *fs = FatFs; - - - i = dj->index + 1; - if (!i || !dj->sect) /* Report EOT when index has reached 65535 */ - return FR_NO_FILE; - - if (!(i % 16)) { /* Sector changed? */ - dj->sect++; /* Next sector */ - - if (dj->clust == 0) { /* Static table */ - if (i >= fs->n_rootdir) /* Report EOT when end of table */ - return FR_NO_FILE; - } - else { /* Dynamic table */ - if (((i / 16) & (fs->csize-1)) == 0) { /* Cluster changed? */ - clst = get_fat(dj->clust); /* Get next cluster */ - if (clst <= 1) return FR_DISK_ERR; - if (clst >= fs->n_fatent) /* When it reached end of dynamic table */ - return FR_NO_FILE; /* Report EOT */ - dj->clust = clst; /* Initialize data for new cluster */ - dj->sect = clust2sect(clst); - } - } - } - - dj->index = i; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Directory handling - Find an object in the directory */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT dir_find ( - DIR *dj, /* Pointer to the directory object linked to the file name */ - BYTE *dir /* 32-byte working buffer */ -) -{ - FRESULT res; - BYTE c; - - - res = dir_rewind(dj); /* Rewind directory object */ - if (res != FR_OK) return res; - - do { - res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */ - ? FR_DISK_ERR : FR_OK; - if (res != FR_OK) break; - c = dir[DIR_Name]; /* First character */ - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ - if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */ - break; - res = dir_next(dj); /* Next entry */ - } while (res == FR_OK); - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read an object from the directory */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR -static -FRESULT dir_read ( - DIR *dj, /* Pointer to the directory object to store read object name */ - BYTE *dir /* 32-byte working buffer */ -) -{ - FRESULT res; - BYTE a, c; - - - res = FR_NO_FILE; - while (dj->sect) { - res = disk_readp(dir, dj->sect, (WORD)((dj->index % 16) * 32), 32) /* Read an entry */ - ? FR_DISK_ERR : FR_OK; - if (res != FR_OK) break; - c = dir[DIR_Name]; - if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */ - a = dir[DIR_Attr] & AM_MASK; - if (c != 0xE5 && c != '.' && !(a & AM_VOL)) /* Is it a valid entry? */ - break; - res = dir_next(dj); /* Next entry */ - if (res != FR_OK) break; - } - - if (res != FR_OK) dj->sect = 0; - - return res; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Pick a segment and create the object name in directory form */ -/*-----------------------------------------------------------------------*/ - -#ifdef _EXCVT - static const BYTE cvt[] = _EXCVT; -#endif - -static -FRESULT create_name ( - DIR *dj, /* Pointer to the directory object */ - const char **path /* Pointer to pointer to the segment in the path string */ -) -{ - BYTE c, d, ni, si, i, *sfn; - const char *p; - - /* Create file name in directory form */ - sfn = dj->fn; - mem_set(sfn, ' ', 11); - si = i = 0; ni = 8; - p = *path; - for (;;) { - c = p[si++]; - if (c <= ' ' || c == '/') break; /* Break on end of segment */ - if (c == '.' || i >= ni) { - if (ni != 8 || c != '.') break; - i = 8; ni = 11; - continue; - } -#ifdef _EXCVT - if (c >= 0x80) /* To upper extended char (SBCS) */ - c = cvt[c - 0x80]; -#endif - if (IsDBCS1(c) && i < ni - 1) { /* DBC 1st byte? */ - d = p[si++]; /* Get 2nd byte */ - sfn[i++] = c; - sfn[i++] = d; - } else { /* Single byte code */ - if (IsLower(c)) c -= 0x20; /* toupper */ - sfn[i++] = c; - } - } - *path = &p[si]; /* Rerurn pointer to the next segment */ - - sfn[11] = (c <= ' ') ? 1 : 0; /* Set last segment flag if end of path */ - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Get file information from directory entry */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR -static -void get_fileinfo ( /* No return code */ - DIR *dj, /* Pointer to the directory object */ - BYTE *dir, /* 32-byte working buffer */ - FILINFO *fno /* Pointer to store the file information */ -) -{ - BYTE i, c; - char *p; - - - p = fno->fname; - if (dj->sect) { - for (i = 0; i < 8; i++) { /* Copy file name body */ - c = dir[i]; - if (c == ' ') break; - if (c == 0x05) c = 0xE5; - *p++ = c; - } - if (dir[8] != ' ') { /* Copy file name extension */ - *p++ = '.'; - for (i = 8; i < 11; i++) { - c = dir[i]; - if (c == ' ') break; - *p++ = c; - } - } - fno->fattrib = dir[DIR_Attr]; /* Attribute */ - fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */ - fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */ - fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */ - } - *p = 0; -} -#endif /* _USE_DIR */ - - - -/*-----------------------------------------------------------------------*/ -/* Follow a file path */ -/*-----------------------------------------------------------------------*/ - -static -FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */ - DIR *dj, /* Directory object to return last directory and found object */ - BYTE *dir, /* 32-byte working buffer */ - const char *path /* Full-path string to find a file or directory */ -) -{ - FRESULT res; - - - while (*path == ' ') path++; /* Skip leading spaces */ - if (*path == '/') path++; /* Strip heading separator */ - dj->sclust = 0; /* Set start directory (always root dir) */ - - if ((BYTE)*path <= ' ') { /* Null path means the root directory */ - res = dir_rewind(dj); - dir[0] = 0; - - } else { /* Follow path */ - for (;;) { - res = create_name(dj, &path); /* Get a segment */ - if (res != FR_OK) break; - res = dir_find(dj, dir); /* Find it */ - if (res != FR_OK) { /* Could not find the object */ - if (res == FR_NO_FILE && !*(dj->fn+11)) - res = FR_NO_PATH; - break; - } - if (*(dj->fn+11)) break; /* Last segment match. Function completed. */ - if (!(dir[DIR_Attr] & AM_DIR)) { /* Cannot follow because it is a file */ - res = FR_NO_PATH; break; - } - dj->sclust = LD_CLUST(dir); - } - } - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Check a sector if it is an FAT boot record */ -/*-----------------------------------------------------------------------*/ - -static -BYTE check_fs ( /* 0:The FAT boot record, 1:Valid boot record but not an FAT, 2:Not a boot record, 3:Error */ - BYTE *buf, /* Working buffer */ - DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */ -) -{ - if (disk_readp(buf, sect, 510, 2)) /* Read the boot sector */ - return 3; - if (LD_WORD(buf) != 0xAA55) /* Check record signature */ - return 2; - - if (!disk_readp(buf, sect, BS_FilSysType, 2) && LD_WORD(buf) == 0x4146) /* Check FAT12/16 */ - return 0; - if (_FS_FAT32 && !disk_readp(buf, sect, BS_FilSysType32, 2) && LD_WORD(buf) == 0x4146) /* Check FAT32 */ - return 0; - return 1; -} - - - - -/*-------------------------------------------------------------------------- - - Public Functions - ---------------------------------------------------------------------------*/ - - - -/*-----------------------------------------------------------------------*/ -/* Mount/Unmount a Locical Drive */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_mount ( - FATFS *fs /* Pointer to new file system object (NULL: Unmount) */ -) -{ - BYTE fmt, buf[36]; - DWORD bsect, fsize, tsect, mclst; - - - FatFs = 0; - if (!fs) return FR_OK; /* Unregister fs object */ - - if (disk_initialize() & STA_NOINIT) /* Check if the drive is ready or not */ - return FR_NOT_READY; - - /* Search FAT partition on the drive */ - bsect = 0; - fmt = check_fs(buf, bsect); /* Check sector 0 as an SFD format */ - if (fmt == 1) { /* Not an FAT boot record, it may be FDISK format */ - /* Check a partition listed in top of the partition table */ - if (disk_readp(buf, bsect, MBR_Table, 16)) { /* 1st partition entry */ - fmt = 3; - } else { - if (buf[4]) { /* Is the partition existing? */ - bsect = LD_DWORD(&buf[8]); /* Partition offset in LBA */ - fmt = check_fs(buf, bsect); /* Check the partition */ - } - } - } - if (fmt == 3) return FR_DISK_ERR; - if (fmt) return FR_NO_FILESYSTEM; /* No valid FAT patition is found */ - - /* Initialize the file system object */ - if (disk_readp(buf, bsect, 13, sizeof(buf))) return FR_DISK_ERR; - - fsize = LD_WORD(buf+BPB_FATSz16-13); /* Number of sectors per FAT */ - if (!fsize) fsize = LD_DWORD(buf+BPB_FATSz32-13); - - fsize *= buf[BPB_NumFATs-13]; /* Number of sectors in FAT area */ - fs->fatbase = bsect + LD_WORD(buf+BPB_RsvdSecCnt-13); /* FAT start sector (lba) */ - fs->csize = buf[BPB_SecPerClus-13]; /* Number of sectors per cluster */ - fs->n_rootdir = LD_WORD(buf+BPB_RootEntCnt-13); /* Nmuber of root directory entries */ - tsect = LD_WORD(buf+BPB_TotSec16-13); /* Number of sectors on the file system */ - if (!tsect) tsect = LD_DWORD(buf+BPB_TotSec32-13); - mclst = (tsect /* Last cluster# + 1 */ - - LD_WORD(buf+BPB_RsvdSecCnt-13) - fsize - fs->n_rootdir / 16 - ) / fs->csize + 2; - fs->n_fatent = (CLUST)mclst; - - fmt = FS_FAT16; /* Determine the FAT sub type */ - if (mclst < 0xFF7) /* Number of clusters < 0xFF5 */ -#if _FS_FAT12 - fmt = FS_FAT12; -#else - return FR_NO_FILESYSTEM; -#endif - if (mclst >= 0xFFF7) /* Number of clusters >= 0xFFF5 */ -#if _FS_FAT32 - fmt = FS_FAT32; -#else - return FR_NO_FILESYSTEM; -#endif - - fs->fs_type = fmt; /* FAT sub-type */ - if (_FS_FAT32 && fmt == FS_FAT32) - fs->dirbase = LD_DWORD(buf+(BPB_RootClus-13)); /* Root directory start cluster */ - else - fs->dirbase = fs->fatbase + fsize; /* Root directory start sector (lba) */ - fs->database = fs->fatbase + fsize + fs->n_rootdir / 16; /* Data start sector (lba) */ - - fs->flag = 0; - FatFs = fs; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Open or Create a File */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_open ( - const char *path /* Pointer to the file name */ -) -{ - FRESULT res; - DIR dj; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) /* Check file system */ - return FR_NOT_ENABLED; - - fs->flag = 0; - dj.fn = sp; - res = follow_path(&dj, dir, path); /* Follow the file path */ - if (res != FR_OK) return res; /* Follow failed */ - if (!dir[0] || (dir[DIR_Attr] & AM_DIR)) /* It is a directory */ - return FR_NO_FILE; - - fs->org_clust = LD_CLUST(dir); /* File start cluster */ - fs->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */ - fs->fptr = 0; /* File pointer */ - fs->flag = FA_OPENED; - - return FR_OK; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read File */ -/*-----------------------------------------------------------------------*/ -#if _USE_READ - -FRESULT pf_read ( - void* buff, /* Pointer to the read buffer (NULL:Forward data to the stream)*/ - WORD btr, /* Number of bytes to read */ - WORD* br /* Pointer to number of bytes read */ -) -{ - DRESULT dr; - CLUST clst; - DWORD sect, remain; - WORD rcnt; - BYTE cs, *rbuff = buff; - FATFS *fs = FatFs; - - - *br = 0; - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - remain = fs->fsize - fs->fptr; - if (btr > remain) btr = (WORD)remain; /* Truncate btr by remaining bytes */ - - while (btr) { /* Repeat until all data transferred */ - if ((fs->fptr % 512) == 0) { /* On the sector boundary? */ - cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */ - if (!cs) { /* On the cluster boundary? */ - clst = (fs->fptr == 0) ? /* On the top of the file? */ - fs->org_clust : get_fat(fs->curr_clust); - if (clst <= 1) goto fr_abort; - fs->curr_clust = clst; /* Update current cluster */ - } - sect = clust2sect(fs->curr_clust); /* Get current sector */ - if (!sect) goto fr_abort; - fs->dsect = sect + cs; - } - rcnt = (WORD)(512 - (fs->fptr % 512)); /* Get partial sector data from sector buffer */ - if (rcnt > btr) rcnt = btr; - dr = disk_readp(!buff ? 0 : rbuff, fs->dsect, (WORD)(fs->fptr % 512), rcnt); - if (dr) goto fr_abort; - fs->fptr += rcnt; rbuff += rcnt; /* Update pointers and counters */ - btr -= rcnt; *br += rcnt; - } - - return FR_OK; - -fr_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Write File */ -/*-----------------------------------------------------------------------*/ -#if _USE_WRITE - -FRESULT pf_write ( - const void* buff, /* Pointer to the data to be written */ - WORD btw, /* Number of bytes to write (0:Finalize the current write operation) */ - WORD* bw /* Pointer to number of bytes written */ -) -{ - CLUST clst; - DWORD sect, remain; - const BYTE *p = buff; - BYTE cs; - WORD wcnt; - FATFS *fs = FatFs; - - - *bw = 0; - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - if (!btw) { /* Finalize request */ - if ((fs->flag & FA__WIP) && disk_writep(0, 0)) goto fw_abort; - fs->flag &= ~FA__WIP; - return FR_OK; - } else { /* Write data request */ - if (!(fs->flag & FA__WIP)) /* Round-down fptr to the sector boundary */ - fs->fptr &= 0xFFFFFE00; - } - remain = fs->fsize - fs->fptr; - if (btw > remain) btw = (WORD)remain; /* Truncate btw by remaining bytes */ - - while (btw) { /* Repeat until all data transferred */ - if (((WORD)fs->fptr % 512) == 0) { /* On the sector boundary? */ - cs = (BYTE)(fs->fptr / 512 & (fs->csize - 1)); /* Sector offset in the cluster */ - if (!cs) { /* On the cluster boundary? */ - clst = (fs->fptr == 0) ? /* On the top of the file? */ - fs->org_clust : get_fat(fs->curr_clust); - if (clst <= 1) goto fw_abort; - fs->curr_clust = clst; /* Update current cluster */ - } - sect = clust2sect(fs->curr_clust); /* Get current sector */ - if (!sect) goto fw_abort; - fs->dsect = sect + cs; - if (disk_writep(0, fs->dsect)) goto fw_abort; /* Initiate a sector write operation */ - fs->flag |= FA__WIP; - } - wcnt = 512 - ((WORD)fs->fptr % 512); /* Number of bytes to write to the sector */ - if (wcnt > btw) wcnt = btw; - if (disk_writep(p, wcnt)) goto fw_abort; /* Send data to the sector */ - fs->fptr += wcnt; p += wcnt; /* Update pointers and counters */ - btw -= wcnt; *bw += wcnt; - if (((WORD)fs->fptr % 512) == 0) { - if (disk_writep(0, 0)) goto fw_abort; /* Finalize the currtent secter write operation */ - fs->flag &= ~FA__WIP; - } - } - - return FR_OK; - -fw_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Seek File R/W Pointer */ -/*-----------------------------------------------------------------------*/ -#if _USE_LSEEK - -FRESULT pf_lseek ( - DWORD ofs /* File pointer from top of file */ -) -{ - CLUST clst; - DWORD bcs, sect, ifptr; - FATFS *fs = FatFs; - - - if (!fs) return FR_NOT_ENABLED; /* Check file system */ - if (!(fs->flag & FA_OPENED)) /* Check if opened */ - return FR_NOT_OPENED; - - if (ofs > fs->fsize) ofs = fs->fsize; /* Clip offset with the file size */ - ifptr = fs->fptr; - fs->fptr = 0; - if (ofs > 0) { - bcs = (DWORD)fs->csize * 512; /* Cluster size (byte) */ - if (ifptr > 0 && - (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */ - fs->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */ - ofs -= fs->fptr; - clst = fs->curr_clust; - } else { /* When seek to back cluster, */ - clst = fs->org_clust; /* start from the first cluster */ - fs->curr_clust = clst; - } - while (ofs > bcs) { /* Cluster following loop */ - clst = get_fat(clst); /* Follow cluster chain */ - if (clst <= 1 || clst >= fs->n_fatent) goto fe_abort; - fs->curr_clust = clst; - fs->fptr += bcs; - ofs -= bcs; - } - fs->fptr += ofs; - sect = clust2sect(clst); /* Current sector */ - if (!sect) goto fe_abort; - fs->dsect = sect + (fs->fptr / 512 & (fs->csize - 1)); - } - - return FR_OK; - -fe_abort: - fs->flag = 0; - return FR_DISK_ERR; -} -#endif - - - -/*-----------------------------------------------------------------------*/ -/* Create a Directroy Object */ -/*-----------------------------------------------------------------------*/ -#if _USE_DIR - -FRESULT pf_opendir ( - DIR *dj, /* Pointer to directory object to create */ - const char *path /* Pointer to the directory path */ -) -{ - FRESULT res; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) { /* Check file system */ - res = FR_NOT_ENABLED; - } else { - dj->fn = sp; - res = follow_path(dj, dir, path); /* Follow the path to the directory */ - if (res == FR_OK) { /* Follow completed */ - if (dir[0]) { /* It is not the root dir */ - if (dir[DIR_Attr] & AM_DIR) /* The object is a directory */ - dj->sclust = LD_CLUST(dir); - else /* The object is not a directory */ - res = FR_NO_PATH; - } - if (res == FR_OK) - res = dir_rewind(dj); /* Rewind dir */ - } - if (res == FR_NO_FILE) res = FR_NO_PATH; - } - - return res; -} - - - - -/*-----------------------------------------------------------------------*/ -/* Read Directory Entry in Sequense */ -/*-----------------------------------------------------------------------*/ - -FRESULT pf_readdir ( - DIR *dj, /* Pointer to the open directory object */ - FILINFO *fno /* Pointer to file information to return */ -) -{ - FRESULT res; - BYTE sp[12], dir[32]; - FATFS *fs = FatFs; - - - if (!fs) { /* Check file system */ - res = FR_NOT_ENABLED; - } else { - dj->fn = sp; - if (!fno) { - res = dir_rewind(dj); - } else { - res = dir_read(dj, dir); - if (res == FR_NO_FILE) { - dj->sect = 0; - res = FR_OK; - } - if (res == FR_OK) { /* A valid entry is found */ - get_fileinfo(dj, dir, fno); /* Get the object information */ - res = dir_next(dj); /* Increment index for next */ - if (res == FR_NO_FILE) { - dj->sect = 0; - res = FR_OK; - } - } - } - } - - return res; -} - -#endif /* _USE_DIR */ - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h b/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h deleted file mode 100644 index 82f8832c7..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/PetiteFATFs/pff.h +++ /dev/null @@ -1,193 +0,0 @@ -/*---------------------------------------------------------------------------/ -/ Petit FatFs - FAT file system module include file R0.02a (C)ChaN, 2010 -/----------------------------------------------------------------------------/ -/ Petit FatFs module is an open source software to implement FAT file system to -/ small embedded systems. This is a free software and is opened for education, -/ research and commercial developments under license policy of following trems. -/ -/ Copyright (C) 2010, ChaN, all right reserved. -/ -/ * The Petit FatFs module is a free software and there is NO WARRANTY. -/ * No restriction on use. You can use, modify and redistribute it for -/ personal, non-profit or commercial use UNDER YOUR RESPONSIBILITY. -/ * Redistributions of source code must retain the above copyright notice. -/ -/----------------------------------------------------------------------------*/ - -#include "integer.h" - -/*---------------------------------------------------------------------------/ -/ Petit FatFs Configuration Options -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FATFS -#define _FATFS - -#define _USE_READ 1 /* 1:Enable pf_read() */ - -#define _USE_DIR 0 /* 1:Enable pf_opendir() and pf_readdir() */ - -#define _USE_LSEEK 0 /* 1:Enable pf_lseek() */ - -#define _USE_WRITE 0 /* 1:Enable pf_write() */ - -#define _FS_FAT12 1 /* 1:Enable FAT12 support */ -#define _FS_FAT32 0 /* 1:Enable FAT32 support */ - - -#define _CODE_PAGE 1 -/* Defines which code page is used for path name. Supported code pages are: -/ 932, 936, 949, 950, 437, 720, 737, 775, 850, 852, 855, 857, 858, 862, 866, -/ 874, 1250, 1251, 1252, 1253, 1254, 1255, 1257, 1258 and 1 (ASCII only). -/ SBCS code pages except for 1 requiers a case conversion table. This -/ might occupy 128 bytes on the RAM on some platforms, e.g. avr-gcc. */ - - -#define _WORD_ACCESS 0 -/* The _WORD_ACCESS option defines which access method is used to the word -/ data in the FAT structure. -/ -/ 0: Byte-by-byte access. Always compatible with all platforms. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned -/ word access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code efficiency. */ - - -/* End of configuration options. Do not change followings without care. */ -/*--------------------------------------------------------------------------*/ - - - -#if _FS_FAT32 -#define CLUST DWORD -#else -#define CLUST WORD -#endif - - -/* File system object structure */ - -typedef struct { - BYTE fs_type; /* FAT sub type */ - BYTE flag; /* File status flags */ - BYTE csize; /* Number of sectors per cluster */ - BYTE pad1; - WORD n_rootdir; /* Number of root directory entries (0 on FAT32) */ - CLUST n_fatent; /* Number of FAT entries (= number of clusters + 2) */ - DWORD fatbase; /* FAT start sector */ - DWORD dirbase; /* Root directory start sector (Cluster# on FAT32) */ - DWORD database; /* Data start sector */ - DWORD fptr; /* File R/W pointer */ - DWORD fsize; /* File size */ - CLUST org_clust; /* File start cluster */ - CLUST curr_clust; /* File current cluster */ - DWORD dsect; /* File current data sector */ -} FATFS; - - - -/* Directory object structure */ - -typedef struct { - WORD index; /* Current read/write index number */ - BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */ - CLUST sclust; /* Table start cluster (0:Static table) */ - CLUST clust; /* Current cluster */ - DWORD sect; /* Current sector */ -} DIR; - - - -/* File status structure */ - -typedef struct { - DWORD fsize; /* File size */ - WORD fdate; /* Last modified date */ - WORD ftime; /* Last modified time */ - BYTE fattrib; /* Attribute */ - char fname[13]; /* File name */ -} FILINFO; - - - -/* File function return code (FRESULT) */ - -typedef enum { - FR_OK = 0, /* 0 */ - FR_DISK_ERR, /* 1 */ - FR_NOT_READY, /* 2 */ - FR_NO_FILE, /* 3 */ - FR_NO_PATH, /* 4 */ - FR_NOT_OPENED, /* 5 */ - FR_NOT_ENABLED, /* 6 */ - FR_NO_FILESYSTEM /* 7 */ -} FRESULT; - - - -/*--------------------------------------------------------------*/ -/* Petit FatFs module application interface */ - -FRESULT pf_mount (FATFS*); /* Mount/Unmount a logical drive */ -FRESULT pf_open (const char*); /* Open a file */ -FRESULT pf_read (void*, WORD, WORD*); /* Read data from the open file */ -FRESULT pf_write (const void*, WORD, WORD*); /* Write data to the open file */ -FRESULT pf_lseek (DWORD); /* Move file pointer of the open file */ -FRESULT pf_opendir (DIR*, const char*); /* Open a directory */ -FRESULT pf_readdir (DIR*, FILINFO*); /* Read a directory item from the open directory */ - - - -/*--------------------------------------------------------------*/ -/* Flags and offset address */ - -/* File status flag (FATFS.flag) */ - -#define FA_OPENED 0x01 -#define FA_WPRT 0x02 -#define FA__WIP 0x40 - - -/* FAT sub type (FATFS.fs_type) */ - -#define FS_FAT12 1 -#define FS_FAT16 2 -#define FS_FAT32 3 - - -/* File attribute bits for directory entry */ - -#define AM_RDO 0x01 /* Read only */ -#define AM_HID 0x02 /* Hidden */ -#define AM_SYS 0x04 /* System */ -#define AM_VOL 0x08 /* Volume label */ -#define AM_LFN 0x0F /* LFN entry */ -#define AM_DIR 0x10 /* Directory */ -#define AM_ARC 0x20 /* Archive */ -#define AM_MASK 0x3F /* Mask of defined bits */ - - -/*--------------------------------*/ -/* Multi-byte word access macros */ - -#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val) -#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val) -#else /* Use byte-by-byte access to the FAT structure */ -#define LD_WORD(ptr) (WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr)) -#define LD_DWORD(ptr) (DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr)) -#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8) -#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24) -#endif - - -#endif /* _FATFS */ - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c b/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c deleted file mode 100644 index 917523669..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "ProgrammerConfig.h" - -struct -{ - uint16_t SigBytes[4]; - bool EnforceSigBytes; - - uint32_t ProgrammingSpeed; -} ProgrammerConfig; - -bool ProgrammerConfig_ProcessConfiguration(void) -{ - memset(&ProgrammerConfig, 0x00, sizeof(ProgrammerConfig)); - - if (!(pf_open("CONF.txt") == FR_OK)) - { - puts(" >> ERROR: CONF.txt File Not Found.\r\n"); - return false; - } - - char LineBuff[100]; - char* CurrentLine; - - do - { - CurrentLine = fgets(LineBuff, sizeof(LineBuff), &DiskStream); - - if (CurrentLine) - { - sscanf(CurrentLine, "SIGNATURE = %02x %02x %02x %02x", &ProgrammerConfig.SigBytes[0], - &ProgrammerConfig.SigBytes[1], - &ProgrammerConfig.SigBytes[2], - &ProgrammerConfig.SigBytes[3]); - - sscanf(CurrentLine, "SPEED = %08lu", &ProgrammerConfig.ProgrammingSpeed); - } - } while (CurrentLine); - - printf(" >> *** Configuration: ***\r\n"); - printf(" >> Device Signature: 0x%02x 0x%02x 0x%02x 0x%02x\r\n", ProgrammerConfig.SigBytes[0], - ProgrammerConfig.SigBytes[1], - ProgrammerConfig.SigBytes[2], - ProgrammerConfig.SigBytes[3]); - printf(" >> Programming Speed: %lu Hz\r\n", ProgrammerConfig.ProgrammingSpeed); - - return true; -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h b/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h deleted file mode 100644 index dbfd0d894..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/ProgrammerConfig.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _PROGRAMMER_CONFIG_H_ -#define _PROGRAMMER_CONFIG_H_ - - /* Includes: */ - #include - #include - #include - - #include "../StandaloneProgrammer.h" - - /* Function Prototypes: */ - bool ProgrammerConfig_ProcessConfiguration(void); - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c deleted file mode 100644 index 2d000b8ea..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage - * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, - * which wrap around standard SCSI device commands for controlling the actual storage medium. - */ - -#define INCLUDE_FROM_SCSI_C -#include "SCSI.h" - -#if defined(USB_CAN_BE_DEVICE) -/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's - * features and capabilities. - */ -static const SCSI_Inquiry_Response_t InquiryData = - { - .DeviceType = DEVICE_TYPE_BLOCK, - .PeripheralQualifier = 0, - - .Removable = true, - - .Version = 0, - - .ResponseDataFormat = 2, - .NormACA = false, - .TrmTsk = false, - .AERC = false, - - .AdditionalLength = 0x1F, - - .SoftReset = false, - .CmdQue = false, - .Linked = false, - .Sync = false, - .WideBus16Bit = false, - .WideBus32Bit = false, - .RelAddr = false, - - .VendorID = "LUFA", - .ProductID = "Dataflash Disk", - .RevisionID = {'0','.','0','0'}, - }; - -/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE - * command is issued. This gives information on exactly why the last command failed to complete. - */ -static SCSI_Request_Sense_Response_t SenseData = - { - .ResponseCode = 0x70, - .AdditionalLength = 0x0A, - }; - - -/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches - * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns - * a command failure due to a ILLEGAL REQUEST. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise - */ -bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess = false; - - /* Run the appropriate SCSI command hander function based on the passed command */ - switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) - { - case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); - break; - case SCSI_CMD_REQUEST_SENSE: - CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); - break; - case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); - break; - case SCSI_CMD_SEND_DIAGNOSTIC: - CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); - break; - case SCSI_CMD_WRITE_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); - break; - case SCSI_CMD_READ_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); - break; - case SCSI_CMD_MODE_SENSE_6: - CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); - break; - case SCSI_CMD_TEST_UNIT_READY: - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - case SCSI_CMD_VERIFY_10: - /* These commands should just succeed, no handling required */ - CommandSuccess = true; - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - break; - default: - /* Update the SENSE key to reflect the invalid command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_COMMAND, - SCSI_ASENSEQ_NO_QUALIFIER); - break; - } - - /* Check if command was successfully processed */ - if (CommandSuccess) - { - SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return true; - } - - return false; -} - -/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features - * and capabilities to the host. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); - uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); - - /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ - if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || - MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) - { - /* Optional but unsupported bits set - update the SENSE key and fail the request */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); - - /* Pad out remaining bytes with 0x00 */ - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, - * including the error code and additional error information so that the host can determine why a command failed to complete. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; - uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); - - Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity - * on the selected Logical Unit (drive), as a number of OS-sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint32_t LastBlockAddressInLUN = (VIRTUAL_MEMORY_BLOCKS - 1); - uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE; - - Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL); - Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - - return true; -} - -/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the - * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is - * supported. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Check to see if the SELF TEST bit is not set */ - if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2))) - { - /* Only self-test supported - update SENSE key and fail the command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Check to see if all attached Dataflash ICs are functional */ - if (!(DataflashManager_CheckDataflashOperation())) - { - /* Update SENSE key with a hardware error condition and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - - return true; -} - -/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address - * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual - * reading and writing of the data. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead) -{ - uint32_t BlockAddress; - uint16_t TotalBlocks; - - /* Check if the disk is write protected or not */ - if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, - SCSI_ASENSE_WRITE_PROTECTED, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ - BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); - - /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ - TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - - /* Check if the block address is outside the maximum allowable value for the LUN */ - if (BlockAddress >= VIRTUAL_MEMORY_BLOCKS) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ - if (IsDataRead == DATA_READ) - DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - else - DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - - return true; -} - -/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about - * the SCSI device, as well as the device's Write Protect status. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean true if the command completed successfully, false otherwise. - */ -static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Send an empty header response with the Write Protect flag status */ - Endpoint_Write_8(0x00); - Endpoint_Write_8(0x00); - Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00); - Endpoint_Write_8(0x00); - Endpoint_ClearIN(); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; - - return true; -} -#endif diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h deleted file mode 100644 index a0940a796..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for SCSI.c. - */ - -#ifndef _SCSI_H_ -#define _SCSI_H_ - - /* Includes: */ - #include - #include - - #include - - #include "../StandaloneProgrammer.h" - #include "../Descriptors.h" - #include "DataflashManager.h" - - /* Macros: */ - /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This - * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about - * the last command failure) in a quick and easy manner. - * - * \param[in] Key New SCSI sense key to set the sense code to - * \param[in] Acode New SCSI additional sense key to set the additional sense code to - * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to - */ - #define SCSI_SET_SENSE(Key, Acode, Aqual) MACROS{ SenseData.SenseKey = (Key); \ - SenseData.AdditionalSenseCode = (Acode); \ - SenseData.AdditionalSenseQualifier = (Aqual); }MACROE - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ - #define DATA_READ true - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ - #define DATA_WRITE false - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ - #define DEVICE_TYPE_BLOCK 0x00 - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ - #define DEVICE_TYPE_CDROM 0x05 - - /* Function Prototypes: */ - #if defined(USB_CAN_BE_DEVICE) - bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - - #if defined(INCLUDE_FROM_SCSI_C) - static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead); - static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - #endif - #endif - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf b/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf deleted file mode 100644 index 8472fefde..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/Standalone Programmer.inf +++ /dev/null @@ -1,106 +0,0 @@ -;************************************************************ -; Windows USB CDC ACM Setup File -; Copyright (c) 2000 Microsoft Corporation - - -[Version] -Signature="$Windows NT$" -Class=Ports -ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} -Provider=%MFGNAME% -LayoutFile=layout.inf -CatalogFile=%MFGFILENAME%.cat -DriverVer=11/15/2007,5.1.2600.0 - -[Manufacturer] -%MFGNAME%=DeviceList, NTamd64 - -[DestinationDirs] -DefaultDestDir=12 - - -;------------------------------------------------------------------------------ -; Windows 2000/XP/Vista-32bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.nt] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.nt -AddReg=DriverInstall.nt.AddReg - -[DriverCopyFiles.nt] -usbser.sys,,,0x20 - -[DriverInstall.nt.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.nt.Services] -AddService=usbser, 0x00000002, DriverService.nt - -[DriverService.nt] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - -;------------------------------------------------------------------------------ -; Vista-64bit Sections -;------------------------------------------------------------------------------ - -[DriverInstall.NTamd64] -include=mdmcpq.inf -CopyFiles=DriverCopyFiles.NTamd64 -AddReg=DriverInstall.NTamd64.AddReg - -[DriverCopyFiles.NTamd64] -%DRIVERFILENAME%.sys,,,0x20 - -[DriverInstall.NTamd64.AddReg] -HKR,,DevLoader,,*ntkern -HKR,,NTMPDriver,,%DRIVERFILENAME%.sys -HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" - -[DriverInstall.NTamd64.Services] -AddService=usbser, 0x00000002, DriverService.NTamd64 - -[DriverService.NTamd64] -DisplayName=%SERVICE% -ServiceType=1 -StartType=3 -ErrorControl=1 -ServiceBinary=%12%\%DRIVERFILENAME%.sys - - -;------------------------------------------------------------------------------ -; Vendor and Product ID Definitions -;------------------------------------------------------------------------------ -; When developing your USB device, the VID and PID used in the PC side -; application program and the firmware on the microcontroller must match. -; Modify the below line to use your VID and PID. Use the format as shown below. -; Note: One INF file can be used for multiple devices with different VID and PIDs. -; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. -;------------------------------------------------------------------------------ -[SourceDisksFiles] -[SourceDisksNames] -[DeviceList] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00 - -[DeviceList.NTamd64] -%DESCRIPTION%=DriverInstall, USB\VID_03EB&PID_2063&MI_00 - - -;------------------------------------------------------------------------------ -; String Definitions -;------------------------------------------------------------------------------ -;Modify these strings to customize your device -;------------------------------------------------------------------------------ -[Strings] -MFGFILENAME="CDC_vista" -DRIVERFILENAME ="usbser" -MFGNAME="CCS, Inc." -INSTDISK="LUFA Benito Programmer Driver Installer" -DESCRIPTION="Communications Port" -SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c deleted file mode 100644 index 86318e9cb..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the Standalone Programmer project. This file contains the main tasks of - * the project and is responsible for the initial application hardware configuration. - */ - -#define INCLUDE_FROM_STANDALONEPROG_C -#include "StandaloneProgrammer.h" - -/** Standard file stream for the currently open file on the disk. */ -FILE DiskStream = FDEV_SETUP_STREAM(NULL, Disk_getchar, _FDEV_SETUP_READ); - -/** Petite FAT Fs structure to hold the internal state of the FAT driver for the Dataflash contents. */ -FATFS DiskFATState; - -/** Stream character fetching routine for the FAT driver so that characters from the currently open file can be - * read in sequence when applied to a stdio stream. - */ -static int Disk_getchar(FILE* Stream) -{ - char ReadByte; - WORD ByteWasRead; - - if (pf_read(&ReadByte, 1, &ByteWasRead) != FR_OK) - return _FDEV_ERR; - - return (ByteWasRead ? ReadByte : _FDEV_EOF); -} - -#if defined(USB_CAN_BE_BOTH) -/** Event to handle mode changes in the library, to clear the FAT library's drive state structure when transitioning - * between modes. This ensures that the library always works with current disk data. - */ -void EVENT_USB_UIDChange(void) -{ - pf_mount(&DiskFATState); -} -#endif - -/** Task to determine if the user is wishes to start the programming sequence, and if so executes the - * required functions to program the attached target (if any) with the files loaded to the Dataflash. - */ -void Programmer_Task(void) -{ - static bool HasAttempted = false; - - if (Buttons_GetStatus() & BUTTONS_BUTTON1) - { - if (!(HasAttempted)) - HasAttempted = true; - else - return; - - puts("==== PROGRAMMING CYCLE STARTED ====\r\n"); - - #if defined(USB_CAN_BE_BOTH) - printf("Using %s Drive...\r\n", (USB_CurrentMode == USB_MODE_Host) ? "External" : "Internal"); - #endif - - puts("Reading Configuration File...\r\n"); - if (!(ProgrammerConfig_ProcessConfiguration())) - goto EndOfProgCycle; - - EndOfProgCycle: - puts("==== PROGRAMMING CYCLE FINISHED ====\r\n"); - } - else - { - HasAttempted = false; - } -} - -/** Main program entry point. This routine contains the overall program flow, including initial - * setup of all components and the main program loop. - */ -int main(void) -{ - SetupHardware(); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); - - for (;;) - { - Programmer_Task(); - - #if defined(USB_CAN_BE_HOST) - if (USB_CurrentMode == USB_MODE_Host) - DiskHost_USBTask(); - #endif - - #if defined(USB_CAN_BE_DEVICE) - if (USB_CurrentMode == USB_MODE_Device) - DiskDevice_USBTask(); - #endif - - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - #if defined(USB_CAN_BE_BOTH) - USB_Init(USB_MODE_UID); - #else - USB_Init(); - #endif - - LEDs_Init(); - SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_SCK_LEAD_FALLING | SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); - Dataflash_Init(); - Buttons_Init(); - Serial_Init(9600, true); - - /* Create a stdio stream for the serial port for stdin and stdout */ - Serial_CreateStream(NULL); - - #if defined(USB_CAN_BE_DEVICE) - /* Check if the Dataflash is working, abort if not */ - if (!(DataflashManager_CheckDataflashOperation())) - { - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); - } - - /* Clear Dataflash sector protections, if enabled */ - DataflashManager_ResetDataflashProtections(); - #endif -} - diff --git a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h b/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h deleted file mode 100644 index 65edc49f5..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/StandaloneProgrammer.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for StandaloneProgrammer.c. - */ - -#ifndef _STANDALONE_PROG_H_ -#define _STANDALONE_PROG_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - - #include "DiskDevice.h" - #include "DiskHost.h" - - #include "Lib/SCSI.h" - #include "Lib/DataflashManager.h" - #include "Lib/ProgrammerConfig.h" - #include "Lib/PetiteFATFs/pff.h" - - #include - #include - #include - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_USB_BUSY LEDS_LED2 - - /* External Variables: */ - extern FILE DiskStream; - extern FATFS DiskFATState; - - /* Function Prototypes: */ - #if defined(INCLUDE_FROM_STANDALONEPROG_C) - static int Disk_getchar(FILE* Stream); - #endif - - void EVENT_USB_UIDChange(void); - - void SetupHardware(void); - void Programmer_Task(void); - -#endif - diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile deleted file mode 100644 index 7d4be5275..000000000 --- a/Projects/Incomplete/StandaloneProgrammer/makefile +++ /dev/null @@ -1,738 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = at90usb1287 - - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USBKEY - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 8000000 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = StandaloneProgrammer - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# Path to the LUFA library -LUFA_PATH = ../../.. - - -# LUFA library compile-time options and predefined tokens -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D HOST_STATE_AS_GPIOR=1 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - Descriptors.c \ - DiskHost.c \ - DiskDevice.c \ - Lib/SCSI.c \ - Lib/DataflashManager.c \ - Lib/ProgrammerConfig.c \ - Lib/PetiteFATFs/diskio.c \ - Lib/PetiteFATFs/pff.c \ - $(LUFA_SRC_USB) \ - $(LUFA_SRC_USBCLASS) \ - $(LUFA_SRC_SERIAL) - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=c99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -CDEFS += -DF_USB=$(F_USB)UL -CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) -CDEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) -ADEFS += -DF_USB=$(F_USB)UL -ADEFS += -DBOARD=BOARD_$(BOARD) -ADEFS += $(LUFA_OPTS) - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -CPPDEFS += -DF_USB=$(F_USB)UL -CPPDEFS += -DBOARD=BOARD_$(BOARD) -CPPDEFS += $(LUFA_OPTS) -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fno-inline-small-functions -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -fno-strict-aliasing -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = jtagmkII - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = usb - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - $(COPY) $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - $(REMOVE) $(TARGET)eep.hex - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) eeprom-flash $(TARGET).eep - dfu-programmer $(MCU) reset - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - -doxygen: - @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ - exit 1; \ - fi; - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -checksource: - @for f in $(SRC) $(CPPSRC) $(ASRC); do \ - if [ -f $$f ]; then \ - echo "Found Source File: $$f" ; \ - else \ - echo "Source File Not Found: $$f" ; \ - fi; done - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff doxygen clean \ -clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config checksource diff --git a/Projects/LEDNotifier/Descriptors.c b/Projects/LEDNotifier/Descriptors.c index d5bc6faed..feff81241 100644 --- a/Projects/LEDNotifier/Descriptors.c +++ b/Projects/LEDNotifier/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/Magstripe/Config/AppConfig.h b/Projects/Magstripe/Config/AppConfig.h index 3fe5456f0..e54151ebc 100644 --- a/Projects/Magstripe/Config/AppConfig.h +++ b/Projects/Magstripe/Config/AppConfig.h @@ -31,9 +31,10 @@ /** \file * \brief Application Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. * * For information on what each token does, refer to the * \ref Sec_Options section of the application documentation. diff --git a/Projects/SerialToLCD/Descriptors.c b/Projects/SerialToLCD/Descriptors.c index ea8ce8c94..f9a1c7a06 100644 --- a/Projects/SerialToLCD/Descriptors.c +++ b/Projects/SerialToLCD/Descriptors.c @@ -38,17 +38,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/TempDataLogger/Config/AppConfig.h b/Projects/TempDataLogger/Config/AppConfig.h index 155a76e05..86f148f0e 100644 --- a/Projects/TempDataLogger/Config/AppConfig.h +++ b/Projects/TempDataLogger/Config/AppConfig.h @@ -31,9 +31,10 @@ /** \file * \brief Application Configuration Header File * - * This is a header file which is be used to configure LUFA's - * compile time options, as an alternative to the compile time - * constants supplied through a makefile. + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. * * For information on what each token does, refer to the * \ref Sec_Options section of the application documentation. diff --git a/Projects/TempDataLogger/Descriptors.c b/Projects/TempDataLogger/Descriptors.c index ffd312df8..551c66ae6 100644 --- a/Projects/TempDataLogger/Descriptors.c +++ b/Projects/TempDataLogger/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** HID class report descriptor. This is a special descriptor constructed with values from the * USBIF HID class specification to describe the reports and capabilities of the HID device. This diff --git a/Projects/USBtoSerial/Config/LUFAConfig.h b/Projects/USBtoSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..4637da529 --- /dev/null +++ b/Projects/USBtoSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/USBtoSerial/Descriptors.c b/Projects/USBtoSerial/Descriptors.c index b7aa48cb4..2b4bb4ceb 100644 --- a/Projects/USBtoSerial/Descriptors.c +++ b/Projects/USBtoSerial/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile index 17919d97e..90c335775 100644 --- a/Projects/USBtoSerial/makefile +++ b/Projects/USBtoSerial/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -172,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Projects/Webserver/Config/AppConfig.h b/Projects/Webserver/Config/AppConfig.h new file mode 100644 index 000000000..e2a9cd4de --- /dev/null +++ b/Projects/Webserver/Config/AppConfig.h @@ -0,0 +1,68 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define ENABLE_DHCP_CLIENT + #define ENABLE_DHCP_SERVER + #define ENABLE_TELNET_SERVER + #define MAX_URI_LENGTH 50 + + #define UIP_CONF_UDP (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)) + #define UIP_CONF_BROADCAST 1 + #define UIP_CONF_TCP 1 + #define UIP_CONF_UDP_CONNS 1 + #define UIP_CONF_MAX_CONNECTIONS 3 + #define UIP_CONF_MAX_LISTENPORTS 5 + #define UIP_CONF_BUFFER_SIZE 1514 + #define UIP_CONF_LL_802154 0 + #define UIP_CONF_LL_80211 0 + #define UIP_CONF_ROUTER 0 + #define UIP_CONF_ICMP6 0 + #define UIP_CONF_ICMP_DEST_UNREACH 1 + #define UIP_URGDATA 0 + #define UIP_ARCH_CHKSUM 0 + #define UIP_ARCH_ADD32 0 + #define UIP_NEIGHBOR_CONF_ADDRTYPE 0 + +#endif \ No newline at end of file diff --git a/Projects/Webserver/Config/LUFAConfig.h b/Projects/Webserver/Config/LUFAConfig.h new file mode 100644 index 000000000..b794426b9 --- /dev/null +++ b/Projects/Webserver/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ + #define HOST_STATE_AS_GPIOR 0 +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/Webserver/Descriptors.c b/Projects/Webserver/Descriptors.c index 57519c864..a82ccc0a4 100644 --- a/Projects/Webserver/Descriptors.c +++ b/Projects/Webserver/Descriptors.c @@ -37,17 +37,6 @@ #include "Descriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/Webserver/Lib/DHCPClientApp.c b/Projects/Webserver/Lib/DHCPClientApp.c index 1a564ca3e..91c0f1f06 100644 --- a/Projects/Webserver/Lib/DHCPClientApp.c +++ b/Projects/Webserver/Lib/DHCPClientApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__) - /** \file * * DHCP Client Application. When connected to the uIP stack, this will retrieve IP configuration settings from the @@ -39,6 +37,8 @@ #define INCLUDE_FROM_DHCPCLIENTAPP_C #include "DHCPClientApp.h" +#if defined(ENABLE_DHCP_CLIENT) || defined(__DOXYGEN__) + /** Initialization function for the DHCP client. */ void DHCPClientApp_Init(void) { diff --git a/Projects/Webserver/Lib/DHCPClientApp.h b/Projects/Webserver/Lib/DHCPClientApp.h index 21c5e435a..b5ce11cbc 100644 --- a/Projects/Webserver/Lib/DHCPClientApp.h +++ b/Projects/Webserver/Lib/DHCPClientApp.h @@ -41,6 +41,7 @@ #include + #include "Config/AppConfig.h" #include "../Webserver.h" #include "DHCPCommon.h" diff --git a/Projects/Webserver/Lib/DHCPCommon.c b/Projects/Webserver/Lib/DHCPCommon.c index f2b999756..b0fe37d04 100644 --- a/Projects/Webserver/Lib/DHCPCommon.c +++ b/Projects/Webserver/Lib/DHCPCommon.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) - /** \file * * Common DHCP routines to manage DHCP packet data. @@ -37,6 +35,8 @@ #include "DHCPCommon.h" +#if defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + /** Sets the given DHCP option in the DHCP packet's option list. This automatically moves the * end of options terminator past the new option in the options list. * diff --git a/Projects/Webserver/Lib/DHCPCommon.h b/Projects/Webserver/Lib/DHCPCommon.h index 797aa571b..dc8dcdfbc 100644 --- a/Projects/Webserver/Lib/DHCPCommon.h +++ b/Projects/Webserver/Lib/DHCPCommon.h @@ -41,6 +41,8 @@ #include #include + #include "Config/AppConfig.h" + #include /* Macros: */ diff --git a/Projects/Webserver/Lib/DHCPServerApp.c b/Projects/Webserver/Lib/DHCPServerApp.c index e2b72af27..05ae4e9e2 100644 --- a/Projects/Webserver/Lib/DHCPServerApp.c +++ b/Projects/Webserver/Lib/DHCPServerApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) - /** \file * * DHCP Server Application. When connected to the uIP stack, this will send IP configuration settings to a @@ -39,6 +37,8 @@ #define INCLUDE_FROM_DHCPSERVERAPP_C #include "DHCPServerApp.h" +#if defined(ENABLE_DHCP_SERVER) || defined(__DOXYGEN__) + struct uip_conn* BroadcastConnection; uint8_t LeasedIPs[255 / 8]; diff --git a/Projects/Webserver/Lib/DHCPServerApp.h b/Projects/Webserver/Lib/DHCPServerApp.h index 151319b5d..d41df3776 100644 --- a/Projects/Webserver/Lib/DHCPServerApp.h +++ b/Projects/Webserver/Lib/DHCPServerApp.h @@ -41,6 +41,7 @@ #include + #include "Config/AppConfig.h" #include "../Webserver.h" #include "DHCPCommon.h" diff --git a/Projects/Webserver/Lib/HTTPServerApp.h b/Projects/Webserver/Lib/HTTPServerApp.h index 526e75804..e3678e845 100644 --- a/Projects/Webserver/Lib/HTTPServerApp.h +++ b/Projects/Webserver/Lib/HTTPServerApp.h @@ -41,6 +41,8 @@ #include #include + + #include "Config/AppConfig.h" #include #include diff --git a/Projects/Webserver/Lib/TELNETServerApp.c b/Projects/Webserver/Lib/TELNETServerApp.c index 3fffae1d1..ff829b9ef 100644 --- a/Projects/Webserver/Lib/TELNETServerApp.c +++ b/Projects/Webserver/Lib/TELNETServerApp.c @@ -28,8 +28,6 @@ this software. */ -#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__) - /** \file * * TELNET Webserver Application. When connected to the uIP stack, @@ -39,6 +37,8 @@ #define INCLUDE_FROM_TELNETSERVERAPP_C #include "TELNETServerApp.h" +#if defined(ENABLE_TELNET_SERVER) || defined(__DOXYGEN__) + /** Welcome message to send to a TELNET client when a connection is first made. */ const char PROGMEM WelcomeHeader[] = "********************************************\r\n" "* LUFA uIP Webserver (TELNET) *\r\n" diff --git a/Projects/Webserver/Lib/TELNETServerApp.h b/Projects/Webserver/Lib/TELNETServerApp.h index 5f3e864c9..df580f53b 100644 --- a/Projects/Webserver/Lib/TELNETServerApp.h +++ b/Projects/Webserver/Lib/TELNETServerApp.h @@ -43,6 +43,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** TCP listen port for incoming TELNET traffic. */ #define TELNET_SERVER_PORT 23 diff --git a/Projects/Webserver/Lib/uip/uipopt.h b/Projects/Webserver/Lib/uip/uipopt.h index 17f703312..520c03f25 100644 --- a/Projects/Webserver/Lib/uip/uipopt.h +++ b/Projects/Webserver/Lib/uip/uipopt.h @@ -62,6 +62,8 @@ #ifndef __UIPOPT_H__ #define __UIPOPT_H__ +#include "Config/AppConfig.h" + #ifndef UIP_LITTLE_ENDIAN #define UIP_LITTLE_ENDIAN 3412 #endif /* UIP_LITTLE_ENDIAN */ diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt index 32bdb597a..9b466d9d0 100644 --- a/Projects/Webserver/Webserver.txt +++ b/Projects/Webserver/Webserver.txt @@ -81,18 +81,18 @@ * * * ENABLE_TELNET_SERVER - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this enables the TELNET server in addition to the HTTP webserver, which listens for incoming connections * and processes user commands. * * * ENABLE_DHCP_CLIENT - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this enables the DHCP client for dynamic IP allocation of the network settings from a DHCP server. * * * ENABLE_DHCP_SERVER - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this enables the DHCP server for dynamic IP allocation of the network settings to a DHCP client. * * @@ -113,7 +113,7 @@ * * * MAX_URI_LENGTH - * Makefile LUFA_OPTS + * AppConfig.h * Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators. * * diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile index b67c6c6f6..53bd17387 100644 --- a/Projects/Webserver/makefile +++ b/Projects/Webserver/makefile @@ -120,34 +120,7 @@ LUFA_PATH = ../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT - -LUFA_OPTS += -D ENABLE_DHCP_CLIENT -LUFA_OPTS += -D ENABLE_DHCP_SERVER -LUFA_OPTS += -D ENABLE_TELNET_SERVER -LUFA_OPTS += -D MAX_URI_LENGTH=50 - -LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)" -LUFA_OPTS += -D UIP_CONF_BROADCAST=1 -LUFA_OPTS += -D UIP_CONF_TCP=1 -LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1 -LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3 -LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5 -LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514 -LUFA_OPTS += -D UIP_CONF_LL_802154=0 -LUFA_OPTS += -D UIP_CONF_LL_80211=0 -LUFA_OPTS += -D UIP_CONF_ROUTER=0 -LUFA_OPTS += -D UIP_CONF_ICMP6=0 -LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1 -LUFA_OPTS += -D UIP_URGDATA=0 -LUFA_OPTS += -D UIP_ARCH_CHKSUM=0 -LUFA_OPTS += -D UIP_ARCH_ADD32=0 -LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -209,7 +182,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/ # Compiler flag to set the C Standard level. diff --git a/Projects/XPLAINBridge/Config/AppConfig.h b/Projects/XPLAINBridge/Config/AppConfig.h new file mode 100644 index 000000000..3fe80171d --- /dev/null +++ b/Projects/XPLAINBridge/Config/AppConfig.h @@ -0,0 +1,64 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUX_LINE_PORT PORTB + #define AUX_LINE_PIN PINB + #define AUX_LINE_DDR DDRB + #define AUX_LINE_MASK (1 << 4) + + #define ENABLE_XPROG_PROTOCOL + + #define VTARGET_ADC_CHANNEL 2 + #define VTARGET_REF_VOLTS 3.3 + #define VTARGET_SCALE_FACTOR 2 +// #define VTARGET_USE_INTERNAL_REF +// #define NO_VTARGET_DETECT +// #define XCK_RESCUE_CLOCK_ENABLE +// #define INVERTED_ISP_MISO + +// #define LIBUSB_DRIVER_COMPAT +// #define FIRMWARE_VERSION_MINOR 0x11 + +#endif \ No newline at end of file diff --git a/Projects/XPLAINBridge/Config/LUFAConfig.h b/Projects/XPLAINBridge/Config/LUFAConfig.h new file mode 100644 index 000000000..4cd8b39f1 --- /dev/null +++ b/Projects/XPLAINBridge/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 16 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 6c131afd4..1b265411c 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -37,17 +37,6 @@ #include "USARTDescriptors.h" -/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as - * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL. - * This allows the host to track a device across insertions on different ports, allowing them to retain allocated - * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices - * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value - * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and - * port location). - */ -#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR) - #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor. -#endif /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall * device characteristics, including the supported USB version, control endpoint size and the diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index 33c66bf51..7bba40fef 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -48,6 +48,7 @@ #include "Lib/V2Protocol.h" #include "Lib/SoftUART.h" + #include "Config/AppConfig.h" #include #include diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt index e71d06ad7..0d02392bb 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.txt +++ b/Projects/XPLAINBridge/XPLAINBridge.txt @@ -80,13 +80,13 @@ * * * LIBUSB_DRIVER_COMPAT - * Makefile LUFA_OPTS + * AppConfig.h * Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making * the code compatible with software such as avrdude (all platforms) that use the libUSB driver. * * * FIRMWARE_VERSION_MINOR - * Makefile LUFA_OPTS + * AppConfig.h * Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible * with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here. * diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile index fec131b4f..63c474eb7 100644 --- a/Projects/XPLAINBridge/makefile +++ b/Projects/XPLAINBridge/makefile @@ -124,25 +124,7 @@ AVRISP_PATH = ../AVRISP-MKII # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0 -LUFA_OPTS += -D ORDERED_EP_CONFIG -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP -LUFA_OPTS += -D NO_DEVICE_SELF_POWER - -LUFA_OPTS += -D AUX_LINE_PORT=PORTB -LUFA_OPTS += -D AUX_LINE_PIN=PINB -LUFA_OPTS += -D AUX_LINE_DDR=DDRB -LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)" -LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2 -LUFA_OPTS += -D VTARGET_REF_VOLTS=3.3 -LUFA_OPTS += -D VTARGET_SCALE_FACTOR=2 -#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT -#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile include $(LUFA_PATH)/LUFA/makefile @@ -196,7 +178,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ $(AVRISP_PATH)/ Config/ # Compiler flag to set the C Standard level. -- cgit v1.2.3 From a268a570b17109bfc6d06f6032f252baa88e37fb Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 12 May 2012 15:44:50 +0000 Subject: AppConfigHeaders: Update project file for Programmers Notepad. --- LUFA.pnproj | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/LUFA.pnproj b/LUFA.pnproj index e7fecddf8..cc4ea4f19 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From f9fb44b01c8594028944b4c361e30c8de3e4057b Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 14:04:29 +0000 Subject: AppConfigHeaders: Remove outdated incomplete BluetoothHost demo - updated Bluetooth stack code is in the ExplorerBot project (http://www.fourwalledcubicle.com/ExplorerBot.php). --- .../Incomplete/BluetoothHost/BluetoothEvents.c | 194 --- .../Incomplete/BluetoothHost/BluetoothEvents.h | 72 - .../Host/Incomplete/BluetoothHost/BluetoothHost.c | 187 -- .../Host/Incomplete/BluetoothHost/BluetoothHost.h | 86 - .../Incomplete/BluetoothHost/ConfigDescriptor.c | 142 -- .../Incomplete/BluetoothHost/ConfigDescriptor.h | 64 - .../Incomplete/BluetoothHost/DeviceDescriptor.c | 68 - .../Incomplete/BluetoothHost/DeviceDescriptor.h | 68 - Demos/Host/Incomplete/BluetoothHost/Doxygen.conf | 1814 -------------------- .../BluetoothHost/Lib/BluetoothACLPackets.c | 809 --------- .../BluetoothHost/Lib/BluetoothACLPackets.h | 200 --- .../BluetoothHost/Lib/BluetoothClassCodes.h | 118 -- .../BluetoothHost/Lib/BluetoothHCICommands.c | 406 ----- .../BluetoothHost/Lib/BluetoothHCICommands.h | 213 --- .../Incomplete/BluetoothHost/Lib/BluetoothStack.c | 74 - .../Incomplete/BluetoothHost/Lib/BluetoothStack.h | 174 -- Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c | 417 ----- Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h | 150 -- .../Incomplete/BluetoothHost/Lib/RFCOMMControl.c | 245 --- .../Incomplete/BluetoothHost/Lib/RFCOMMControl.h | 148 -- Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c | 716 -------- Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h | 250 --- .../Incomplete/BluetoothHost/Lib/SDPServices.c | 184 -- .../Incomplete/BluetoothHost/Lib/SDPServices.h | 174 -- Demos/Host/Incomplete/BluetoothHost/makefile | 733 -------- 25 files changed, 7706 deletions(-) delete mode 100644 Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Doxygen.conf delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c delete mode 100644 Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h delete mode 100644 Demos/Host/Incomplete/BluetoothHost/makefile diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c deleted file mode 100644 index 0bdb7af24..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Bluetooth stack event callback handlers. This module handles the callback events that are - * thrown from the Bluetooth stack in response to changes in the connection and channel - * states. - */ - -#include "BluetoothEvents.h" - -/** Pointer to the opened Bluetooth ACL channel structure for RFCOMM, used to send and receive data between the - * local and remote device once a RFCOMM channel has been opened. - */ -Bluetooth_Channel_t* SerialChannel_ACL = NULL; - -/** Pointer to the opened RFCOMM logical channel between local and remote device, once a RFCOMM ACL channel has been - * negotiated and a logical RFCOMM channel requested. - */ -RFCOMM_Channel_t* SerialChannel_RFCOMM = NULL; - -/** Bluetooth stack callback event for when the Bluetooth stack has fully initialized using the attached - * Bluetooth dongle. - */ -void Bluetooth_StackInitialized(void) -{ - printf_P(PSTR("Stack initialized with local address %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), - Bluetooth_State.LocalBDADDR[5], Bluetooth_State.LocalBDADDR[4], Bluetooth_State.LocalBDADDR[3], - Bluetooth_State.LocalBDADDR[2], Bluetooth_State.LocalBDADDR[1], Bluetooth_State.LocalBDADDR[0]); - - /* Reinitialize the services placed on top of the Bluetooth stack ready for new connections */ - RFCOMM_Initialize(); -} - -/** Bluetooth stack callback event for a Bluetooth connection request. When this callback fires, the - * user application must indicate if the connection is to be allowed or rejected. - * - * \param[in] RemoteAddress Bluetooth address of the remote device attempting the connection - * - * \return Boolean true to accept the connection, false to reject it - */ -bool Bluetooth_ConnectionRequest(const uint8_t* RemoteAddress) -{ - printf_P(PSTR("Connection Request from Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), - RemoteAddress[5], RemoteAddress[4], RemoteAddress[3], RemoteAddress[2], - RemoteAddress[1], RemoteAddress[0]); - - /* Always accept connections from remote devices */ - return true; -} - -/** Bluetooth stack callback event for a completed Bluetooth connection. When this callback is made, - * the connection information can be accessed through the global \ref Bluetooth_Connection structure. - */ -void Bluetooth_ConnectionComplete(void) -{ - printf_P(PSTR("Connection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), - Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4], - Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2], - Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0]); - - LEDs_SetAllLEDs(LEDMASK_USB_BUSY); -} - -/** Bluetooth stack callback event for a completed Bluetooth disconnection. When this callback is made, - * the connection information in the global \ref Bluetooth_Connection structure is invalidated with the - * exception of the RemoteAddress element, which can be used to determine the address of the device that - * was disconnected. - */ -void Bluetooth_DisconnectionComplete(void) -{ - printf_P(PSTR("Disconnection Complete to Device %02X:%02X:%02X:%02X:%02X:%02X.\r\n"), - Bluetooth_Connection.RemoteAddress[5], Bluetooth_Connection.RemoteAddress[4], - Bluetooth_Connection.RemoteAddress[3], Bluetooth_Connection.RemoteAddress[2], - Bluetooth_Connection.RemoteAddress[1], Bluetooth_Connection.RemoteAddress[0]); - - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -/** Bluetooth stack callback event for a Bluetooth ACL Channel connection request. When is callback fires, - * the user application must indicate if the channel connection should be rejected or not, based on the - * protocol (PSM) value of the requested channel. - * - * \param[in] PSM Protocol PSM value for the requested channel - * - * \return Boolean true to accept the channel connection request, false to reject it - */ -bool Bluetooth_ChannelConnectionRequest(const uint16_t PSM) -{ - /* Only accept connections for channels that will be used for RFCOMM or SDP data */ - return ((PSM == CHANNEL_PSM_RFCOMM) || (PSM == CHANNEL_PSM_SDP)); -} - -/** Bluetooth stack callback event for when a Bluetooth ACL channel has been fully created and configured, - * either at the request of the local device, or the remote device. - * - * \param[in] ACLChannel Bluetooth ACL data channel information structure for the channel that can now be used - */ -void Bluetooth_ChannelOpened(Bluetooth_Channel_t* const ACLChannel) -{ - /* Save the RFCOMM channel for later use when we want to send RFCOMM data */ - if (ACLChannel->PSM == CHANNEL_PSM_RFCOMM) - SerialChannel_ACL = ACLChannel; -} - -/** Bluetooth stack callback event for a non-signal ACL packet reception. This callback fires once a connection - * to a remote Bluetooth device has been made, and the remote device has sent a non-signaling ACL packet. - * - * \param[in] Data Pointer to a buffer where the received data is stored - * \param[in] DataLen Length of the packet data, in bytes - * \param[in] ACLChannel Bluetooth ACL data channel information structure for the packet's destination channel - */ -void Bluetooth_PacketReceived(void* Data, uint16_t DataLen, Bluetooth_Channel_t* const ACLChannel) -{ - /* Run the correct packet handler based on the received packet's PSM, which indicates the service being carried */ - switch (ACLChannel->PSM) - { - case CHANNEL_PSM_SDP: - /* Service Discovery Protocol packet */ - SDP_ProcessPacket(Data, ACLChannel); - break; - case CHANNEL_PSM_RFCOMM: - /* RFCOMM (Serial Port) Protocol packet */ - RFCOMM_ProcessPacket(Data, ACLChannel); - break; - } -} - -/** RFCOMM layer callback for event for when a RFCOMM logical channel has been fully opened and configured between - * the local and remote device. Once open, this RFCOMM channel can be read from and written to freely until is it - * closed by either end. - * - * \param[in] RFCOMMChannel RFCOMM channel that was opened - */ -void RFCOMM_ChannelOpened(RFCOMM_Channel_t* const RFCOMMChannel) -{ - /* Save the serial port RFCOMM logical channel for later use */ - SerialChannel_RFCOMM = RFCOMMChannel; -} - -/** RFCOMM layer callback event for when a packet is received on an open RFCOMM channel. - * - * \param[in] ACLChannel RFCOMM ACL channel that the data was directed to - * \param[in] DataLen Length of the received data, in bytes - * \param[in] Data Pointer to a buffer where the received data is stored - */ -void RFCOMM_DataReceived(RFCOMM_Channel_t* const ACLChannel, uint16_t DataLen, const uint8_t* Data) -{ - /* Write the received bytes to the serial port */ - for (uint8_t i = 0; i < DataLen; i++) - putchar(Data[i]); - - /* Echo the data back to the sending device */ - RFCOMM_SendData(DataLen, Data, SerialChannel_RFCOMM, SerialChannel_ACL); -} - -/** RFCOMM layer callback event for when the remote device has updated the channel terminal control signals - * for a particular RFCOMM channel. - * - * \param[in] RFCOMMChannel RFCOMM logical channel whose signals were altered - */ -void RFCOMM_ChannelSignalsReceived(RFCOMM_Channel_t* const RFCOMMChannel) -{ - // Currently do nothing in response to the remote device sending new terminal control signals -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h deleted file mode 100644 index ae235fb65..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BluetoothEvents.c. - */ - -#ifndef _BLUETOOTH_EVENTS_H_ -#define _BLUETOOTH_EVENTS_H_ - - /* Includes: */ - #include - #include - - #include "BluetoothHost.h" - #include "Lib/BluetoothStack.h" - #include "Lib/SDP.h" - #include "Lib/RFCOMM.h" - - #include - #include - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_USB_BUSY LEDS_LED2 - - /* External Variables: */ - extern Bluetooth_Channel_t* SerialChannel_ACL; - extern RFCOMM_Channel_t* SerialChannel_RFCOMM; - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c deleted file mode 100644 index 14ba26f65..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the BluetoothHost demo. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "BluetoothHost.h" - -/** Bluetooth configuration structure. This structure configures the Bluetooth stack's user alterable settings. */ -Bluetooth_Device_t Bluetooth_DeviceConfiguration = - { - Class: (DEVICE_CLASS_SERVICE_CAPTURING | DEVICE_CLASS_MAJOR_COMPUTER | DEVICE_CLASS_MINOR_COMPUTER_PALM), - PINCode: "0000", - Name: "LUFA Bluetooth Demo" - }; - -/** Main program entry point. This routine configures the hardware required by the application, then - * enters a loop to run the application tasks in sequence. - */ -int main(void) -{ - SetupHardware(); - - puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE)); - - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); - sei(); - - for (;;) - { - RFCOMM_ServiceChannels(SerialChannel_ACL); - - Bluetooth_Stack_USBTask(); - USB_USBTask(); - } -} - -/** Configures the board hardware and chip peripherals for the demo's functionality. */ -void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - Serial_Init(9600, false); - LEDs_Init(); - USB_Init(); - - /* Create a stdio stream for the serial port for stdin and stdout */ - Serial_CreateStream(NULL); -} - -/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_Host_DeviceAttached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); -} - -/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and - * stops the library USB task management process. - */ -void EVENT_USB_Host_DeviceUnattached(void) -{ - puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE)); - LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); -} - -/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully - * enumerated by the host and is now ready to be used by the application. - */ -void EVENT_USB_Host_DeviceEnumerationComplete(void) -{ - puts_P(PSTR("Getting Device Data.\r\n")); - - uint8_t ErrorCode; - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead) - { - if (ErrorCode == DevControlError) - puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n")); - else - puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - puts_P(PSTR("Getting Config Data.\r\n")); - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) - { - if (ErrorCode == ControlError) - puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n")); - else - puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ - if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) - { - printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - return; - } - - puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n")); - - /* Initialize the Bluetooth stack */ - Bluetooth_Stack_Init(); - - LEDs_SetAllLEDs(LEDMASK_USB_READY); -} - -/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_Host_HostError(const uint8_t ErrorCode) -{ - USB_Disable(); - - printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n" - " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - for(;;); -} - -/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while - * enumerating an attached USB device. - */ -void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode) -{ - printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n" - " -- Error Code %d\r\n" - " -- Sub Error Code %d\r\n" - " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - - LEDs_SetAllLEDs(LEDMASK_USB_ERROR); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h deleted file mode 100644 index 77d054fe2..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BluetoothHost.c. - */ - -#ifndef _BLUETOOTH_HOST_H_ -#define _BLUETOOTH_HOST_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - #include - - #include "BluetoothEvents.h" - #include "DeviceDescriptor.h" - #include "ConfigDescriptor.h" - #include "Lib/BluetoothStack.h" - - #include - #include - #include - #include - #include - - /* Macros: */ - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ - #define LEDMASK_USB_NOTREADY LEDS_LED1 - - /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ - #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ - #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) - - /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ - #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - - /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ - #define LEDMASK_USB_BUSY LEDS_LED2 - - /* Event Handlers: */ - void EVENT_USB_Host_DeviceAttached(void); - void EVENT_USB_Host_DeviceUnattached(void); - void EVENT_USB_Host_DeviceEnumerationComplete(void); - void EVENT_USB_Host_HostError(const uint8_t ErrorCode); - void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, - const uint8_t SubErrorCode); - - /* Function Prototypes: */ - void SetupHardware(void); - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c deleted file mode 100644 index fa19052a8..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations - * needed to communication with an attached USB device. Descriptors are special computer-readable structures - * which the host requests upon device enumeration, to determine the device's capabilities and functions. - */ - -#include "ConfigDescriptor.h" - -/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This - * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate - * with compatible devices. - * - * This routine searches for a BT interface descriptor containing bulk IN and OUT data endpoints. - * - * \return An error code from the \ref BluetoothHost_GetConfigDescriptorDataCodes_t enum. - */ -uint8_t ProcessConfigurationDescriptor(void) -{ - uint8_t ConfigDescriptorData[512]; - void* CurrConfigLocation = ConfigDescriptorData; - uint16_t CurrConfigBytesRem; - - USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; - USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; - USB_Descriptor_Endpoint_t* EventsEndpoint = NULL; - - /* Retrieve the entire configuration descriptor into the allocated buffer */ - switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData))) - { - case HOST_GETCONFIG_Successful: - break; - case HOST_GETCONFIG_InvalidData: - return InvalidConfigDataReturned; - case HOST_GETCONFIG_BuffOverflow: - return DescriptorTooLarge; - default: - return DevControlError; - } - - /* The Bluetooth USB transport addendum mandates that the data (not streaming voice) endpoints - be in the first interface descriptor (interface 0) */ - USB_GetNextDescriptorOfType(&CurrConfigBytesRem, &CurrConfigLocation, DTYPE_Interface); - - /* Ensure that an interface was found, and the end of the descriptor was not reached */ - if (!(CurrConfigBytesRem)) - return NoCompatibleInterfaceFound; - - while (!(DataINEndpoint) || !(DataOUTEndpoint)) - { - /* Get the next Bluetooth interface's data endpoint descriptor */ - if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, - DComp_NextInterfaceBluetoothDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found) - { - /* Data endpoints not found within the first bluetooth device interface, error out */ - return NoCompatibleInterfaceFound; - } - - /* Retrieve the endpoint address from the endpoint descriptor */ - USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); - - /* If the endpoint is a IN type endpoint */ - if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN) - { - /* Check if the found endpoint is a interrupt or bulk type descriptor */ - if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT) - EventsEndpoint = EndpointData; - else - DataINEndpoint = EndpointData; - } - else - { - DataOUTEndpoint = EndpointData; - } - } - - /* Configure the Bluetooth data IN pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, 1); - - /* Configure the Bluetooth data OUT pipe */ - Pipe_ConfigurePipe(BLUETOOTH_DATA_OUT_PIPE, EP_TYPE_BULK, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, 1); - - /* Configure the Bluetooth events pipe */ - Pipe_ConfigurePipe(BLUETOOTH_EVENTS_PIPE, EP_TYPE_INTERRUPT, EventsEndpoint->EndpointAddress, EventsEndpoint->EndpointSize, 1); - Pipe_SetInterruptPeriod(EventsEndpoint->PollingIntervalMS); - - /* Valid data found, return success */ - return SuccessfulConfigRead; -} - -/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's - * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration - * descriptor processing if an incompatible descriptor configuration is found. - * - * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the - * search if another interface descriptor is found before the required endpoint. - * - * \return A value from the DSEARCH_Return_ErrorCodes_t enum - */ -uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor) -{ - USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); - - /* Determine the type of the current descriptor */ - if (Header->Type == DTYPE_Endpoint) - return DESCRIPTOR_SEARCH_Found; - else if (Header->Type == DTYPE_Interface) - return DESCRIPTOR_SEARCH_Fail; - else - return DESCRIPTOR_SEARCH_NotFound; -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h deleted file mode 100644 index c46add71a..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for ConfigDescriptor.c. - */ - -#ifndef _CONFIGDESCRIPTOR_H_ -#define _CONFIGDESCRIPTOR_H_ - - /* Includes: */ - #include - - /* Macros: */ - #define BLUETOOTH_DATA_IN_PIPE (PIPE_DIR_IN | 1) - #define BLUETOOTH_DATA_OUT_PIPE (PIPE_DIR_OUT | 2) - #define BLUETOOTH_EVENTS_PIPE (PIPE_DIR_IN | 3) - - /* Enums: */ - /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ - enum BluetoothHost_GetConfigDescriptorDataCodes_t - { - SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */ - DevControlError = 1, /**< A control request to the device failed to complete successfully */ - DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */ - InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ - NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ - }; - - /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - - uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor); - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c deleted file mode 100644 index 3ef64765c..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special - * computer-readable structures which the host requests upon device enumeration, to determine information about - * the attached device. - */ - -#include "DeviceDescriptor.h" - -/** Reads and processes an attached device's Device Descriptor, to determine compatibility - * - * This routine checks to ensure that the attached device's class codes match those for Bluetooth devices. - * - * \return An error code from the \ref BluetoothHost_GetDeviceDescriptorDataCodes_t enum. - */ -uint8_t ProcessDeviceDescriptor(void) -{ - USB_Descriptor_Device_t DeviceDescriptor; - - /* Send the request to retrieve the device descriptor */ - if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful) - return DevControlError; - - /* Validate returned data - ensure the returned data is a device descriptor */ - if (DeviceDescriptor.Header.Type != DTYPE_Device) - return InvalidDeviceDataReturned; - - /* Validate returned device Class, SubClass and Protocol values against the Bluetooth spec values */ - if ((DeviceDescriptor.Class != BLUETOOTH_DEVICE_CLASS) || - (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) || - (DeviceDescriptor.Protocol != BLUETOOTH_DEVICE_PROTOCOL)) - { - return IncorrectBTDevice; - } - - return SuccessfulDeviceRead; -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h deleted file mode 100644 index 7f955c824..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DeviceDescriptor.c. - */ - -#ifndef _DEVICEDESCRIPTOR_H_ -#define _DEVICEDESCRIPTOR_H_ - - /* Includes: */ - #include - - #include "BluetoothHost.h" - - /* Macros: */ - /** Device Class value for the Bluetooth Device class. */ - #define BLUETOOTH_DEVICE_CLASS 0xE0 - - /** Device Subclass value for the Bluetooth Device class. */ - #define BLUETOOTH_DEVICE_SUBCLASS 0x01 - - /** Device Protocol value for the Bluetooth Device class. */ - #define BLUETOOTH_DEVICE_PROTOCOL 0x01 - - /* Enums: */ - /** Enum for the possible return codes of the \ref ProcessDeviceDescriptor() function. */ - enum BluetoothHost_GetDeviceDescriptorDataCodes_t - { - SuccessfulDeviceRead = 0, /**< Device Descriptor was processed successfully */ - ControlError = 1, /**< A control request to the device failed to complete successfully */ - InvalidDeviceDataReturned = 2, /**< The device returned an invalid Device Descriptor */ - IncorrectBTDevice = 3, /**< The attached device is not a Bluetooth class device */ - }; - - /* Function Prototypes: */ - uint8_t ProcessDeviceDescriptor(void); - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Doxygen.conf b/Demos/Host/Incomplete/BluetoothHost/Doxygen.conf deleted file mode 100644 index f6629db60..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Doxygen.conf +++ /dev/null @@ -1,1814 +0,0 @@ -# Doxyfile 1.8.0 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. -# -# All text after a hash (#) is considered a comment and will be ignored. -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" "). - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all -# text before the first occurrence of this tag. Doxygen uses libiconv (or the -# iconv built into libc) for the transcoding. See -# http://www.gnu.org/software/libiconv for the list of possible encodings. - -DOXYFILE_ENCODING = UTF-8 - -# The PROJECT_NAME tag is a single word (or sequence of words) that should -# identify the project. Note that if you do not use Doxywizard you need -# to put quotes around the project name if it contains spaces. - -PROJECT_NAME = "LUFA Library - Bluetooth Host Demo" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = 0.0.0 - -# Using the PROJECT_BRIEF tag one can provide an optional one line description -# for a project that appears at the top of each page and should give viewer -# a quick idea about the purpose of the project. Keep the description short. - -PROJECT_BRIEF = - -# With the PROJECT_LOGO tag one can specify an logo or icon that is -# included in the documentation. The maximum height of the logo should not -# exceed 55 pixels and the maximum width should not exceed 200 pixels. -# Doxygen will copy the logo to the output directory. - -PROJECT_LOGO = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = ./Documentation/ - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, -# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, -# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English -# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, -# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. - -OUTPUT_LANGUAGE = English - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful if your file system -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = YES - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like regular Qt-style comments -# (thus requiring an explicit @brief command for a brief description.) - -JAVADOC_AUTOBRIEF = NO - -# If the QT_AUTOBRIEF tag is set to YES then Doxygen will -# interpret the first line (until the first dot) of a Qt-style -# comment as the brief description. If set to NO, the comments -# will behave just like regular Qt-style comments (thus requiring -# an explicit \brief command for a brief description.) - -QT_AUTOBRIEF = NO - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 4 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# This tag can be used to specify a number of word-keyword mappings (TCL only). -# A mapping has the form "name=value". For example adding -# "class=itcl::class" will allow you to use the command class in the -# itcl::class meaning. - -TCL_SUBST = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java -# sources only. Doxygen will then generate output that is more tailored for -# Java. For instance, namespaces will be presented as packages, qualified -# scopes will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran -# sources only. Doxygen will then generate output that is more tailored for -# Fortran. - -OPTIMIZE_FOR_FORTRAN = NO - -# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL -# sources. Doxygen will then generate output that is tailored for -# VHDL. - -OPTIMIZE_OUTPUT_VHDL = NO - -# Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. - -EXTENSION_MAPPING = - -# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all -# comments according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you -# can mix doxygen, HTML, and XML commands with Markdown formatting. -# Disable only in case of backward compatibilities issues. - -MARKDOWN_SUPPORT = NO - -# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want -# to include (a tag file for) the STL sources as input, then you should -# set this tag to YES in order to let doxygen match functions declarations and -# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. -# func(std::string) {}). This also makes the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. - -BUILTIN_STL_SUPPORT = NO - -# If you use Microsoft's C++/CLI language, you should set this option to YES to -# enable parsing support. - -CPP_CLI_SUPPORT = NO - -# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. -# Doxygen will parse them like normal C++ but will assume all classes use public -# instead of private inheritance when no explicit protection keyword is present. - -SIP_SUPPORT = NO - -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. - -IDL_PROPERTY_SUPPORT = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and -# unions are shown inside the group in which they are included (e.g. using -# @ingroup) instead of on a separate page (for HTML and Man pages) or -# section (for LaTeX and RTF). - -INLINE_GROUPED_CLASSES = NO - -# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and -# unions with only public data fields will be shown inline in the documentation -# of the scope in which they are defined (i.e. file, namespace, or group -# documentation), provided this scope is documented. If set to NO (the default), -# structs, classes, and unions are shown on a separate page (for HTML and Man -# pages) or section (for LaTeX and RTF). - -INLINE_SIMPLE_STRUCTS = NO - -# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum -# is documented as struct, union, or enum with the name of the typedef. So -# typedef struct TypeS {} TypeT, will appear in the documentation as a struct -# with name TypeT. When disabled the typedef will appear as a member of a file, -# namespace, or class. And the struct will be named TypeS. This can typically -# be useful for C code in case the coding convention dictates that all compound -# types are typedef'ed and only the typedef is referenced, never the tag name. - -TYPEDEF_HIDES_STRUCT = NO - -# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to -# determine which symbols to keep in memory and which to flush to disk. -# When the cache is full, less often used symbols will be written to disk. -# For small to medium size projects (<1000 input files) the default value is -# probably good enough. For larger projects a too small cache size can cause -# doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penalty. -# If the system has enough physical memory increasing the cache will improve the -# performance by keeping more symbols in memory. Note that the value works on -# a logarithmic scale so increasing the size by one will roughly double the -# memory usage. The cache size is given by this formula: -# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -SYMBOL_CACHE_SIZE = 0 - -# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be -# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given -# their name and scope. Since this can be an expensive process and often the -# same symbol appear multiple times in the code, doxygen keeps a cache of -# pre-resolved symbols. If the cache is too small doxygen will become slower. -# If the cache is too large, memory is wasted. The cache size is given by this -# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols. - -LOOKUP_CACHE_SIZE = 0 - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = YES - -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation. - -EXTRACT_PACKAGE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If this flag is set to YES, the members of anonymous namespaces will be -# extracted and appear in the documentation as a namespace called -# 'anonymous_namespace{file}', where file will be replaced with the base -# name of the file that contains the anonymous namespace. By default -# anonymous namespaces are hidden. - -EXTRACT_ANON_NSPACES = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = NO - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen -# will list include files with double quotes in the documentation -# rather than with sharp brackets. - -FORCE_LOCAL_INCLUDES = NO - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen -# will sort the (brief and detailed) documentation of class members so that -# constructors and destructors are listed first. If set to NO (the default) -# the constructors will appear in the respective orders defined by -# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. -# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO -# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. - -SORT_MEMBERS_CTORS_1ST = NO - -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the -# hierarchy of group names into alphabetical order. If set to NO (the default) -# the group names will appear in their defined order. - -SORT_GROUP_NAMES = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to -# do proper type resolution of all parameters of a function it will reject a -# match between the prototype and the implementation of a member function even -# if there is only one candidate or it is obvious which candidate to choose -# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen -# will still accept a match between prototype and implementation in such cases. - -STRICT_PROTO_MATCHING = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = NO - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = NO - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = NO - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or macro consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and macros in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = YES - -# Set the SHOW_FILES tag to NO to disable the generation of the Files page. -# This will remove the Files entry from the Quick Index and from the -# Folder Tree View (if specified). The default is YES. - -SHOW_FILES = YES - -# Set the SHOW_NAMESPACES tag to NO to disable the generation of the -# Namespaces page. -# This will remove the Namespaces entry from the Quick Index -# and from the Folder Tree View (if specified). The default is YES. - -SHOW_NAMESPACES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from -# the version control system). Doxygen will invoke the program by executing (via -# popen()) the command , where is the value of -# the FILE_VERSION_FILTER tag, and is the name of an input file -# provided by doxygen. Whatever the program writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. -# You can optionally specify a file name after the option, if omitted -# DoxygenLayout.xml will be used as the name of the layout file. - -LAYOUT_FILE = - -# The CITE_BIB_FILES tag can be used to specify one or more bib files -# containing the references data. This must be a list of .bib files. The -# .bib extension is automatically appended if omitted. Using this command -# requires the bibtex tool to be installed. See also -# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style -# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this -# feature you need bibtex and perl available in the search path. - -CITE_BIB_FILES = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# The WARN_NO_PARAMDOC option can be enabled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = ./ - -# This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is -# also the default input encoding. Doxygen uses libiconv (or the iconv built -# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for -# the list of possible encodings. - -INPUT_ENCODING = UTF-8 - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh -# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py -# *.f90 *.f *.for *.vhd *.vhdl - -FILE_PATTERNS = *.h \ - *.c \ - *.txt - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should be -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. -# Note that relative paths are relative to the directory from which doxygen is -# run. - -EXCLUDE = Documentation/ - -# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or -# directories that are symbolic links (a Unix file system feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. Note that the wildcards are matched -# against the file with absolute path, so to exclude all test directories -# for example use the pattern */test/* - -EXCLUDE_PATTERNS = - -# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names -# (namespaces, classes, functions, etc.) that should be excluded from the -# output. The symbol name can be a fully qualified name, a word, or if the -# wildcard * is used, a substring. Examples: ANamespace, AClass, -# AClass::ANamespace, ANamespace::*Test - -EXCLUDE_SYMBOLS = __* \ - INCLUDE_FROM_* - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = * - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. -# If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. -# Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. -# The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty or if -# non of the patterns match the file name, INPUT_FILTER is applied. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file -# pattern. A pattern will override the setting for FILTER_PATTERN (if any) -# and it is also possible to disable source filtering for a specific pattern -# using *.ext= (so without naming a filter). This option only has effect when -# FILTER_SOURCE_FILES is enabled. - -FILTER_SOURCE_PATTERNS = - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = NO - -# If the REFERENCES_RELATION tag is set to YES -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = NO - -# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) -# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from -# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will -# link to the source code. -# Otherwise they will link to the documentation. - -REFERENCES_LINK_SOURCE = NO - -# If the USE_HTAGS tag is set to YES then the references to source code -# will point to the HTML generated by the htags(1) tool instead of doxygen -# built-in source browser. The htags tool is part of GNU's global source -# tagging system (see http://www.gnu.org/software/global/global.html). You -# will need version 4.8.6 or higher. - -USE_HTAGS = NO - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = YES - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. Note that when using a custom header you are responsible -# for the proper inclusion of any scripts and style sheets that doxygen -# needs, which is dependent on the configuration options used. -# It is advised to generate a default header using "doxygen -w html -# header.html footer.html stylesheet.css YourConfigFile" and then modify -# that header. Note that the header is subject to change so you typically -# have to redo this when upgrading to a newer version of doxygen or when -# changing the value of configuration settings such as GENERATE_TREEVIEW! - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# style sheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or -# other source files which should be copied to the HTML output directory. Note -# that these files will be copied to the base HTML output directory. Use the -# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these -# files. In the HTML_STYLESHEET file, use the file name only. Also note that -# the files will be copied as-is; there are no commands or markers available. - -HTML_EXTRA_FILES = - -# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the style sheet and background images -# according to this color. Hue is specified as an angle on a colorwheel, -# see http://en.wikipedia.org/wiki/Hue for more information. -# For instance the value 0 represents red, 60 is yellow, 120 is green, -# 180 is cyan, 240 is blue, 300 purple, and 360 is red again. -# The allowed range is 0 to 359. - -HTML_COLORSTYLE_HUE = 220 - -# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of -# the colors in the HTML output. For a value of 0 the output will use -# grayscales only. A value of 255 will produce the most vivid colors. - -HTML_COLORSTYLE_SAT = 100 - -# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to -# the luminance component of the colors in the HTML output. Values below -# 100 gradually make the output lighter, whereas values above 100 make -# the output darker. The value divided by 100 is the actual gamma applied, -# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, -# and 100 does not change the gamma. - -HTML_COLORSTYLE_GAMMA = 80 - -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting -# this to NO can help when comparing the output of multiple runs. - -HTML_TIMESTAMP = NO - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML -# documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). - -HTML_DYNAMIC_SECTIONS = YES - -# If the GENERATE_DOCSET tag is set to YES, additional index files -# will be generated that can be used as input for Apple's Xcode 3 -# integrated development environment, introduced with OSX 10.5 (Leopard). -# To create a documentation set, doxygen will generate a Makefile in the -# HTML output directory. Running make will produce the docset in that -# directory and running "make install" will install the docset in -# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find -# it at startup. -# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. - -GENERATE_DOCSET = NO - -# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the -# feed. A documentation feed provides an umbrella under which multiple -# documentation sets from a single provider (such as a company or product suite) -# can be grouped. - -DOCSET_FEEDNAME = "Doxygen generated docs" - -# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that -# should uniquely identify the documentation set bundle. This should be a -# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen -# will append .docset to the name. - -DOCSET_BUNDLE_ID = org.doxygen.Project - -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. - -DOCSET_PUBLISHER_ID = org.doxygen.Publisher - -# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher. - -DOCSET_PUBLISHER_NAME = Publisher - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING -# is used to encode HtmlHelp index (hhk), content (hhc) and project file -# content. - -CHM_INDEX_ENCODING = - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = YES - -# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and -# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated -# that can be used as input for Qt's qhelpgenerator to generate a -# Qt Compressed Help (.qch) of the generated HTML documentation. - -GENERATE_QHP = NO - -# If the QHG_LOCATION tag is specified, the QCH_FILE tag can -# be used to specify the file name of the resulting .qch file. -# The path specified is relative to the HTML output folder. - -QCH_FILE = - -# The QHP_NAMESPACE tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#namespace - -QHP_NAMESPACE = org.doxygen.Project - -# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating -# Qt Help Project output. For more information please see -# http://doc.trolltech.com/qthelpproject.html#virtual-folders - -QHP_VIRTUAL_FOLDER = doc - -# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to -# add. For more information please see -# http://doc.trolltech.com/qthelpproject.html#custom-filters - -QHP_CUST_FILTER_NAME = - -# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the -# custom filter to add. For more information please see -# -# Qt Help Project / Custom Filters. - -QHP_CUST_FILTER_ATTRS = - -# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this -# project's -# filter section matches. -# -# Qt Help Project / Filter Attributes. - -QHP_SECT_FILTER_ATTRS = - -# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can -# be used to specify the location of Qt's qhelpgenerator. -# If non-empty doxygen will try to run qhelpgenerator on the generated -# .qhp file. - -QHG_LOCATION = - -# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files -# will be generated, which together with the HTML files, form an Eclipse help -# plugin. To install this plugin and make it available under the help contents -# menu in Eclipse, the contents of the directory containing the HTML and XML -# files needs to be copied into the plugins directory of eclipse. The name of -# the directory within the plugins directory should be the same as -# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before -# the help appears. - -GENERATE_ECLIPSEHELP = NO - -# A unique identifier for the eclipse help plugin. When installing the plugin -# the directory name containing the HTML and XML files should also have -# this name. - -ECLIPSE_DOC_ID = org.doxygen.Project - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) -# at top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. Since the tabs have the same information as the -# navigation tree you can set this option to NO if you already set -# GENERATE_TREEVIEW to YES. - -DISABLE_INDEX = NO - -# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index -# structure should be generated to display hierarchical information. -# If the tag value is set to YES, a side panel will be generated -# containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). -# Windows users are probably better off using the HTML help feature. -# Since the tree basically has the same information as the tab index you -# could consider to set DISABLE_INDEX to NO when enabling this option. - -GENERATE_TREEVIEW = YES - -# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values -# (range [0,1..20]) that doxygen will group on one line in the generated HTML -# documentation. Note that a value of 0 will completely suppress the enum -# values from appearing in the overview section. - -ENUM_VALUES_PER_LINE = 1 - -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. - -USE_INLINE_TREES = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open -# links to external symbols imported via tag files in a separate window. - -EXT_LINKS_IN_WINDOW = NO - -# Use this tag to change the font size of Latex formulas included -# as images in the HTML documentation. The default is 10. Note that -# when you change the font size after a successful doxygen run you need -# to manually remove any form_*.png images from the HTML output directory -# to force them to be regenerated. - -FORMULA_FONTSIZE = 10 - -# Use the FORMULA_TRANPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are -# not supported properly for IE 6.0, but are supported on all modern browsers. -# Note that when changing this option you need to delete any form_*.png files -# in the HTML output before the changes have effect. - -FORMULA_TRANSPARENT = YES - -# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax -# (see http://www.mathjax.org) which uses client side Javascript for the -# rendering instead of using prerendered bitmaps. Use this if you do not -# have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you may also need to install MathJax separately and -# configure the path to it using the MATHJAX_RELPATH option. - -USE_MATHJAX = NO - -# When MathJax is enabled you need to specify the location relative to the -# HTML output directory using the MATHJAX_RELPATH option. The destination -# directory should contain the MathJax.js script. For instance, if the mathjax -# directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to -# the MathJax Content Delivery Network so you can quickly see the result without -# installing MathJax. -# However, it is strongly recommended to install a local -# copy of MathJax from http://www.mathjax.org before deployment. - -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest - -# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension -# names that should be enabled during MathJax rendering. - -MATHJAX_EXTENSIONS = - -# When the SEARCHENGINE tag is enabled doxygen will generate a search box -# for the HTML output. The underlying search engine uses javascript -# and DHTML and should work on any modern browser. Note that when using -# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets -# (GENERATE_DOCSET) there is already a search function so this one should -# typically be disabled. For large projects the javascript based search engine -# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution. - -SEARCHENGINE = NO - -# When the SERVER_BASED_SEARCH tag is enabled the search engine will be -# implemented using a PHP enabled web server instead of at the web client -# using Javascript. Doxygen will generate the search PHP script and index -# file to put on the web server. The advantage of the server -# based approach is that it scales better to large projects and allows -# full text search. The disadvantages are that it is more difficult to setup -# and does not have live searching capabilities. - -SERVER_BASED_SEARCH = NO - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = NO - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. -# Note that when enabling USE_PDFLATEX this option is only used for -# generating bitmaps for formulas in the HTML output, but not in the -# Makefile that is written to the output directory. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for -# the generated latex document. The footer should contain everything after -# the last chapter. If it is left blank doxygen will generate a -# standard footer. Notice: only use this tag if you know what you are doing! - -LATEX_FOOTER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -# If LATEX_SOURCE_CODE is set to YES then doxygen will include -# source code with syntax highlighting in the LaTeX output. -# Note that which sources are shown also depends on other settings -# such as SOURCE_BROWSER. - -LATEX_SOURCE_CODE = NO - -# The LATEX_BIB_STYLE tag can be used to specify the style to use for the -# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See -# http://en.wikipedia.org/wiki/BibTeX for more info. - -LATEX_BIB_STYLE = plain - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load style sheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. -# This is useful -# if you want to understand what is going on. -# On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = YES - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_DEFINED tags. - -EXPAND_ONLY_PREDEF = YES - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# pointed to by INCLUDE_PATH will be searched when a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = __DOXYGEN__ \ - PROGMEM - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition that -# overrules the definition found in the source code. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all references to function-like macros -# that are alone on a line, have an all uppercase name, and do not end with a -# semicolon, because these will confuse the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. For each -# tag file the location of the external documentation should be added. The -# format of a tag file without this location is as follows: -# -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths -# or URLs. Note that each tag file must have a unique name (where the name does -# NOT include the path). If a tag file is not located in the directory in which -# doxygen is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option also works with HAVE_DOT disabled, but it is recommended to -# install and use dot, since it yields more powerful graphs. - -CLASS_DIAGRAMS = NO - -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see -# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is -# allowed to run in parallel. When set to 0 (the default) doxygen will -# base this on the number of processors available in the system. You can set it -# explicitly to a value larger than 0 to get control over the balance -# between CPU load and processing speed. - -DOT_NUM_THREADS = 0 - -# By default doxygen will use the Helvetica font for all dot files that -# doxygen generates. When you want a differently looking font you can specify -# the font name using DOT_FONTNAME. You need to make sure dot is able to find -# the font, which can be done by putting it in a standard location or by setting -# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the -# directory containing the font. - -DOT_FONTNAME = FreeSans - -# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. -# The default size is 10pt. - -DOT_FONTSIZE = 10 - -# By default doxygen will tell dot to use the Helvetica font. -# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to -# set the path where dot can find it. - -DOT_FONTPATH = - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = NO - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = NO - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = NO - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If the UML_LOOK tag is enabled, the fields and methods are shown inside -# the class node. If there are many fields or methods and many nodes the -# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS -# threshold limits the number of items for each type to make the size more -# managable. Set this to 0 for no limit. Note that the threshold may be -# exceeded by 50% before the limit is enforced. - -UML_LIMIT_NUM_FIELDS = 10 - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = NO - -# If the CALL_GRAPH and HAVE_DOT options are set to YES then -# doxygen will generate a call dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable call graphs -# for selected functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then -# doxygen will generate a caller dependency graph for every global function -# or class method. Note that enabling this option will significantly increase -# the time of a run. So in most cases it will be better to enable caller -# graphs for selected functions only using the \callergraph command. - -CALLER_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will generate a graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = NO - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = NO - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are svg, png, jpg, or gif. -# If left blank png will be used. If you choose svg you need to set -# HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible in IE 9+ (other browsers do not have this requirement). - -DOT_IMAGE_FORMAT = png - -# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to -# enable generation of interactive SVG images that allow zooming and panning. -# Note that this requires a modern browser other than Internet Explorer. -# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you -# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files -# visible. Older versions of IE do not have SVG support. - -INTERACTIVE_SVG = NO - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the -# \mscfile command). - -MSCFILE_DIRS = - -# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of -# nodes that will be shown in the graph. If the number of nodes in a graph -# becomes larger than this value, doxygen will truncate the graph, which is -# visualized by representing a node as a red box. Note that doxygen if the -# number of direct children of the root node in a graph is already larger than -# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note -# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. - -DOT_GRAPH_MAX_NODES = 15 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that the size of a graph can be further restricted by -# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. - -MAX_DOT_GRAPH_DEPTH = 2 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not -# seem to support this out of the box. Warning: Depending on the platform used, -# enabling this option may lead to badly anti-aliased labels on the edges of -# a graph (i.e. they become hard to read). - -DOT_TRANSPARENT = YES - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c deleted file mode 100644 index a02a66b7b..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ /dev/null @@ -1,809 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Bluetooth L2CAP layer management code. This module managed the creation, - * configuration and teardown of L2CAP channels, and manages packet reception - * and sending to and from other Bluetooth devices. - */ - -/* - TODO: Make SendPacket respect receiver's MTU - TODO: Make ReceivePacket stitch together MTU fragments (?) - */ - -#define INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C -#include "BluetoothACLPackets.h" - -/** Bluetooth ACL processing task. This task should be called repeatedly the main Bluetooth - * stack task to manage the ACL processing state. - */ -void Bluetooth_ACLTask(void) -{ - /* Process incoming ACL packets, if any */ - Bluetooth_ProcessIncomingACLPackets(); - - /* Check for any half-open channels, send configuration details to the remote device if found */ - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i]; - - bool MustSendConfigReq = true; - - /* Check if we are in a channel state which requires a configuration request to be sent */ - switch (ChannelData->State) - { - case BT_Channel_Config_WaitConfig: - ChannelData->State = BT_Channel_Config_WaitReqResp; - break; - case BT_Channel_Config_WaitSendConfig: - ChannelData->State = BT_Channel_Config_WaitResp; - break; - default: - MustSendConfigReq = false; - break; - } - - /* Only send a configuration request if it the channel was in a state which required it */ - if (MustSendConfigReq) - { - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_ConfigurationReq_t ConfigurationRequest; - - struct - { - BT_Config_Option_Header_t Header; - uint16_t Value; - } Option_LocalMTU; - } PacketData; - - /* Fill out the Signal Command header in the response packet */ - PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; - PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConfigurationRequest) + - sizeof(PacketData.Option_LocalMTU); - - /* Fill out the Configuration Request in the response packet, including local MTU information */ - PacketData.ConfigurationRequest.DestinationChannel = ChannelData->RemoteNumber; - PacketData.ConfigurationRequest.Flags = 0; - PacketData.Option_LocalMTU.Header.Type = BT_CONFIG_OPTION_MTU; - PacketData.Option_LocalMTU.Header.Length = sizeof(PacketData.Option_LocalMTU.Value); - PacketData.Option_LocalMTU.Value = ChannelData->LocalMTU; - - Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Configuration Request"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.ConfigurationRequest.DestinationChannel); - } - } -} - -/** Incoming ACL packet processing task. This task is called by the main ACL processing task to read in and process - * any incoming ACL packets to the device, handling signal requests as they are received or passing along channel - * data to the user application. - */ -static void Bluetooth_ProcessIncomingACLPackets(void) -{ - BT_ACL_Header_t ACLPacketHeader; - BT_DataPacket_Header_t DataHeader; - - Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE); - Pipe_Unfreeze(); - - if (!(Pipe_IsReadWriteAllowed())) - { - Pipe_Freeze(); - return; - } - - /* Read in the received ACL packet headers when it has been discovered that a packet has been received */ - Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader), NULL); - Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader), NULL); - - BT_ACL_DEBUG(2, ""); - BT_ACL_DEBUG(2, "Packet Received"); - BT_ACL_DEBUG(2, "-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF)); - BT_ACL_DEBUG(2, "-- Data Length: 0x%04X", ACLPacketHeader.DataLength); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel); - BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength); - - /* Check the packet's destination channel - signaling channel should be processed by the stack internally */ - if (DataHeader.DestinationChannel == BT_CHANNEL_SIGNALING) - { - /* Read in the Signal Command header of the incoming packet */ - BT_Signal_Header_t SignalCommandHeader; - Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader), NULL); - - /* Dispatch to the appropriate handler function based on the Signal message code */ - switch (SignalCommandHeader.Code) - { - case BT_SIGNAL_CONNECTION_REQUEST: - Bluetooth_Signal_ConnectionReq(&SignalCommandHeader); - break; - case BT_SIGNAL_CONNECTION_RESPONSE: - Bluetooth_Signal_ConnectionResp(&SignalCommandHeader); - break; - case BT_SIGNAL_CONFIGURATION_REQUEST: - Bluetooth_Signal_ConfigurationReq(&SignalCommandHeader); - break; - case BT_SIGNAL_CONFIGURATION_RESPONSE: - Bluetooth_Signal_ConfigurationResp(&SignalCommandHeader); - break; - case BT_SIGNAL_DISCONNECTION_REQUEST: - Bluetooth_Signal_DisconnectionReq(&SignalCommandHeader); - break; - case BT_SIGNAL_DISCONNECTION_RESPONSE: - Bluetooth_Signal_DisconnectionResp(&SignalCommandHeader); - break; - case BT_SIGNAL_ECHO_REQUEST: - Bluetooth_Signal_EchoReq(&SignalCommandHeader); - break; - case BT_SIGNAL_INFORMATION_REQUEST: - Bluetooth_Signal_InformationReq(&SignalCommandHeader); - break; - case BT_SIGNAL_COMMAND_REJECT: - BT_ACL_DEBUG(1, "<< Command Reject"); - - uint16_t RejectReason; - Pipe_Read_Stream_LE(&RejectReason, sizeof(RejectReason), NULL); - Pipe_Discard_Stream(ACLPacketHeader.DataLength - sizeof(RejectReason), NULL); - Pipe_ClearIN(); - Pipe_Freeze(); - - BT_ACL_DEBUG(2, "-- Reason: %d", RejectReason); - break; - default: - BT_ACL_DEBUG(1, "<< Unknown Signaling Command 0x%02X", SignalCommandHeader.Code); - - Pipe_Discard_Stream(ACLPacketHeader.DataLength, NULL); - Pipe_ClearIN(); - Pipe_Freeze(); - break; - } - } - else - { - /* Non-signaling packet received, read in the packet contents and pass to the user application */ - uint8_t PacketData[DataHeader.PayloadLength]; - Pipe_Read_Stream_LE(PacketData, DataHeader.PayloadLength, NULL); - Pipe_ClearIN(); - Pipe_Freeze(); - - Bluetooth_PacketReceived(PacketData, DataHeader.PayloadLength, - Bluetooth_GetChannelData(DataHeader.DestinationChannel, CHANNEL_SEARCH_LOCALNUMBER)); - } -} - -/** Retrieves the channel information structure with the given local or remote channel number from the channel list. - * - * \param[in] SearchValue Value to search for in the channel structure list - * \param[in] SearchKey Key to search within the channel structure, a \c CHANNEL_SEARCH_* mask - * - * \return Pointer to the matching channel information structure in the channel table if found, NULL otherwise - */ -Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue, - const uint8_t SearchKey) -{ - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i]; - - /* Closed channels should be ignored as they are not considered valid data */ - if (ChannelData->State == BT_Channel_Closed) - continue; - - bool FoundMatch = false; - - /* Search the current channel for the search key to see if it matches */ - switch (SearchKey) - { - case CHANNEL_SEARCH_LOCALNUMBER: - FoundMatch = (SearchValue == ChannelData->LocalNumber); - break; - case CHANNEL_SEARCH_REMOTENUMBER: - FoundMatch = (SearchValue == ChannelData->RemoteNumber); - break; - case CHANNEL_SEARCH_PSM: - FoundMatch = (SearchValue == ChannelData->PSM); - break; - } - - if (FoundMatch) - return ChannelData; - } - - return NULL; -} - -/** Sends a packet to the remote device on the specified channel. - * - * \param[in] Data Pointer to a buffer where the data is to be sourced from - * \param[in] DataLen Length of the data to send - * \param[in] ACLChannel ACL channel information structure containing the destination channel's information, NULL - * to send to the remote device's signaling channel - * - * \return A value from the \ref BT_SendPacket_ErrorCodes_t enum - */ -uint8_t Bluetooth_SendPacket(void* Data, - const uint16_t DataLen, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_ACL_Header_t ACLPacketHeader; - BT_DataPacket_Header_t DataHeader; - - /* A remote device must be connected before a packet transmission is attempted */ - if (!(Bluetooth_Connection.IsConnected)) - return BT_SENDPACKET_NotConnected; - - /* If the destination channel is not the signaling channel and it is not currently fully open, abort */ - if ((ACLChannel != NULL) && (ACLChannel->State != BT_Channel_Open)) - return BT_SENDPACKET_ChannelNotOpen; - - /* Fill out the packet's header from the remote device connection information structure */ - ACLPacketHeader.ConnectionHandle = (Bluetooth_Connection.ConnectionHandle | BT_ACL_FIRST_AUTOFLUSH); - ACLPacketHeader.DataLength = sizeof(DataHeader) + DataLen; - DataHeader.PayloadLength = DataLen; - DataHeader.DestinationChannel = (ACLChannel == NULL) ? BT_CHANNEL_SIGNALING : ACLChannel->RemoteNumber; - - Pipe_SelectPipe(BLUETOOTH_DATA_OUT_PIPE); - - Pipe_WaitUntilReady(); - Pipe_Unfreeze(); - - /* Write the packet contents to the pipe so that it can be sent to the remote device */ - Pipe_Write_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader), NULL); - Pipe_Write_Stream_LE(&DataHeader, sizeof(DataHeader), NULL); - Pipe_Write_Stream_LE(Data, DataLen, NULL); - Pipe_ClearOUT(); - - Pipe_Freeze(); - - BT_ACL_DEBUG(2, ""); - BT_ACL_DEBUG(2, "Packet Sent"); - BT_ACL_DEBUG(2, "-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF)); - BT_ACL_DEBUG(2, "-- Data Length: 0x%04X", ACLPacketHeader.DataLength); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DataHeader.DestinationChannel); - BT_ACL_DEBUG(2, "-- Payload Length: 0x%04X", DataHeader.PayloadLength); - - return BT_SENDPACKET_NoError; -} - -/** Opens a Bluetooth channel to the currently connected remote device, so that data can be exchanged. - * - * \note The channel is not immediately opened when this function returns - it must undergo a two way - * connection and configuration process first as the main Bluetooth stack processing task is - * repeatedly called. The returned channel is unusable by the user application until its State - * element has progressed to the Open state. - * - * \param[in] PSM PSM of the service that the channel is to be opened for - * - * \return Pointer to the channel information structure of the opened channel, or NULL if no free channels - */ -Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM) -{ - Bluetooth_Channel_t* ChannelData = NULL; - - /* Search through the channel information list for a free channel item */ - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - if (Bluetooth_Connection.Channels[i].State == BT_Channel_Closed) - { - ChannelData = &Bluetooth_Connection.Channels[i]; - - /* Set the new channel structure's local channel number to a unique value within the connection orientated - channel address space */ - ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i); - break; - } - } - - /* If no free channel item was found in the list, all channels are occupied - abort */ - if (ChannelData == NULL) - return NULL; - - /* Reset and fill out the allocated channel's information structure with defaults */ - ChannelData->RemoteNumber = 0; - ChannelData->PSM = PSM; - ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; - ChannelData->State = BT_Channel_WaitConnectRsp; - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_ConnectionReq_t ConnectionRequest; - } PacketData; - - /* Fill out the Signal Command header in the response packet */ - PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; - PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConnectionRequest); - - /* Fill out the Connection Request in the response packet */ - PacketData.ConnectionRequest.PSM = PSM; - PacketData.ConnectionRequest.SourceChannel = ChannelData->LocalNumber; - - Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Connection Request"); - BT_ACL_DEBUG(2, "-- PSM 0x%04X", PacketData.ConnectionRequest.PSM); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.ConnectionRequest.SourceChannel); - - return ChannelData; -} - -/** Closes a Bluetooth channel that is open to the currently connected remote device, so that no further data - * can be exchanged. - * - * \note The channel is not immediately closed when this function returns - it must undergo an asynchronous - * disconnection process first as the main Bluetooth stack processing task is repeatedly called. The - * returned channel is unusable by the user application upon return however the channel is not completely - * closed until its State element has progressed to the Closed state. - * - * \param[in,out] ACLChannel ACL channel information structure of the channel to close - */ -void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel) -{ - /* Don't try to close a non-existing or already closed channel */ - if ((ACLChannel == NULL) || (ACLChannel->State == BT_Channel_Closed)) - return; - - /* Set the channel's state to the start of the teardown process */ - ACLChannel->State = BT_Channel_WaitDisconnect; - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_DisconnectionReq_t DisconnectionRequest; - } PacketData; - - /* Fill out the Signal Command header in the response packet */ - PacketData.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_REQUEST; - PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; - PacketData.SignalCommandHeader.Length = sizeof(PacketData.DisconnectionRequest); - - /* Fill out the Disconnection Request in the response packet */ - PacketData.DisconnectionRequest.DestinationChannel = ACLChannel->RemoteNumber; - PacketData.DisconnectionRequest.SourceChannel = ACLChannel->LocalNumber; - - Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Disconnection Request"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.DisconnectionRequest.DestinationChannel); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.DisconnectionRequest.SourceChannel); -} - -/** Internal Bluetooth stack Signal Command processing routine for a Connection Request command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_ConnectionReq_t ConnectionRequest; - - Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest), NULL); - - Pipe_ClearIN(); - Pipe_Freeze(); - - BT_ACL_DEBUG(1, "<< L2CAP Connection Request"); - BT_ACL_DEBUG(2, "-- PSM: 0x%04X", ConnectionRequest.PSM); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel); - - /* Try to retrieve the existing channel's information structure if it exists */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionRequest.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - - /* If an existing channel item with the correct remote channel number was not found, find a free channel entry */ - if (ChannelData == NULL) - { - /* Look through the channel information list for a free entry */ - for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) - { - if (Bluetooth_Connection.Channels[i].State == BT_Channel_Closed) - { - ChannelData = &Bluetooth_Connection.Channels[i]; - - /* Set the new channel structure's local channel number to a unique value within the connection orientated - channel address space */ - ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i); - break; - } - } - } - - uint8_t ChannelStatus = BT_CONNECTION_REFUSED_RESOURCES; - - /* Reset the channel item contents only if a channel entry was found for it */ - if (ChannelData != NULL) - { - /* Check if the user application will allow the connection based on its PSM */ - if (Bluetooth_ChannelConnectionRequest(ConnectionRequest.PSM)) - { - ChannelData->RemoteNumber = ConnectionRequest.SourceChannel; - ChannelData->PSM = ConnectionRequest.PSM; - ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; - ChannelData->State = BT_Channel_Config_WaitConfig; - - ChannelStatus = BT_CONNECTION_SUCCESSFUL; - } - else - { - ChannelStatus = BT_CONNECTION_REFUSED_PSM; - } - } - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_ConnectionResp_t ConnectionResponse; - } ResponsePacket; - - /* Fill out the Signal Command header in the response packet */ - ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_RESPONSE; - ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; - ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConnectionResponse); - - /* Fill out the Connection Response in the response packet */ - ResponsePacket.ConnectionResponse.DestinationChannel = (ChannelData != NULL) ? ChannelData->LocalNumber : 0; - ResponsePacket.ConnectionResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0; - ResponsePacket.ConnectionResponse.Result = ChannelStatus; - ResponsePacket.ConnectionResponse.Status = 0x00; - - Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Connection Response"); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConnectionResponse.Result); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.ConnectionResponse.DestinationChannel); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConnectionResponse.SourceChannel); -} - -/** Internal Bluetooth stack Signal Command processing routine for a Connection Response command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_ConnectionResp_t ConnectionResponse; - - Pipe_Read_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse), NULL); - - Pipe_ClearIN(); - Pipe_Freeze(); - - BT_ACL_DEBUG(1, "<< L2CAP Connection Response"); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel); - - /* Search for the referenced channel in the channel information list */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionResponse.SourceChannel, CHANNEL_SEARCH_LOCALNUMBER); - - /* Only progress if the referenced channel data was found */ - if (ChannelData != NULL) - { - /* Set the channel structure's remote channel number to the channel allocated on the remote device */ - ChannelData->RemoteNumber = ConnectionResponse.SourceChannel; - ChannelData->State = (ConnectionResponse.Result == BT_CONNECTION_SUCCESSFUL) ? - BT_Channel_Config_WaitConfig : BT_Channel_Closed; - } -} - -/** Internal Bluetooth stack Signal Command processing routine for a Configuration Request command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_ConfigurationReq_t ConfigurationRequest; - - /* Allocate a buffer large enough to hold the variable number of configuration options in the request */ - uint8_t OptionsLen = (SignalCommandHeader->Length - sizeof(ConfigurationRequest)); - uint8_t Options[OptionsLen]; - - Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest), NULL); - Pipe_Read_Stream_LE(&Options, sizeof(Options), NULL); - - Pipe_ClearIN(); - Pipe_Freeze(); - - /* Search for the referenced channel in the channel information list */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationRequest.DestinationChannel, CHANNEL_SEARCH_LOCALNUMBER); - - BT_ACL_DEBUG(1, "<< L2CAP Configuration Request"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConfigurationRequest.DestinationChannel); - BT_ACL_DEBUG(2, "-- Options Len: 0x%04X", OptionsLen); - - /* Only look at the channel configuration options if a valid channel entry for the local channel number was found */ - if (ChannelData != NULL) - { - /* Iterate through each option in the configuration request to look for ones which can be processed */ - uint8_t OptionPos = 0; - while (OptionPos < OptionsLen) - { - BT_Config_Option_Header_t* OptionHeader = (BT_Config_Option_Header_t*)&Options[OptionPos]; - void* OptionData = &Options[OptionPos + sizeof(BT_Config_Option_Header_t)]; - - BT_ACL_DEBUG(2, "-- Option Type: 0x%04X", OptionHeader->Type); - BT_ACL_DEBUG(2, "-- Option Length: 0x%04X", (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length)); - - /* Store the remote MTU option's value if present */ - if (OptionHeader->Type == BT_CONFIG_OPTION_MTU) - ChannelData->RemoteMTU = *((uint16_t*)OptionData); - - /* Progress to the next option in the packet */ - OptionPos += (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length); - } - } - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_ConfigurationResp_t ConfigurationResponse; - } ResponsePacket; - - /* Fill out the Signal Command header in the response packet */ - ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_RESPONSE; - ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; - ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.ConfigurationResponse); - - /* Fill out the Configuration Response in the response packet */ - ResponsePacket.ConfigurationResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0; - ResponsePacket.ConfigurationResponse.Flags = 0x00; - ResponsePacket.ConfigurationResponse.Result = (ChannelData != NULL) ? BT_CONFIGURATION_SUCCESSFUL : BT_CONFIGURATION_REJECTED; - - Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); - - if (ChannelData != NULL) - { - switch (ChannelData->State) - { - case BT_Channel_Config_WaitConfig: - ChannelData->State = BT_Channel_Config_WaitSendConfig; - break; - case BT_Channel_Config_WaitReqResp: - ChannelData->State = BT_Channel_Config_WaitResp; - break; - case BT_Channel_Config_WaitReq: - ChannelData->State = BT_Channel_Open; - Bluetooth_ChannelOpened(ChannelData); - break; - } - } - - BT_ACL_DEBUG(1, ">> L2CAP Configuration Response"); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.ConfigurationResponse.SourceChannel); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.ConfigurationResponse.Result); -} - -/** Internal Bluetooth stack Signal Command processing routine for a Configuration Response command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_ConfigurationResp_t ConfigurationResponse; - - Pipe_Read_Stream_LE(&ConfigurationResponse, sizeof(ConfigurationResponse), NULL); - - Pipe_ClearIN(); - Pipe_Freeze(); - - BT_ACL_DEBUG(1, "<< L2CAP Configuration Response"); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConfigurationResponse.SourceChannel); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConfigurationResponse.Result); - - /* Search for the referenced channel in the channel information list */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - - /* Only update the channel's state if it was found in the channel list */ - if (ChannelData != NULL) - { - /* Check if the channel configuration completed successfully */ - if (ConfigurationResponse.Result == BT_CONFIGURATION_SUCCESSFUL) - { - switch (ChannelData->State) - { - case BT_Channel_Config_WaitReqResp: - ChannelData->State = BT_Channel_Config_WaitReq; - break; - case BT_Channel_Config_WaitResp: - ChannelData->State = BT_Channel_Open; - Bluetooth_ChannelOpened(ChannelData); - break; - } - } - else - { - /* Configuration failed - close the channel */ - ChannelData->State = BT_Channel_Closed; - } - } -} - -/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Request command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_DisconnectionReq_t DisconnectionRequest; - - Pipe_Read_Stream_LE(&DisconnectionRequest, sizeof(DisconnectionRequest), NULL); - - BT_ACL_DEBUG(1, "<< L2CAP Disconnection Request"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionRequest.DestinationChannel); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionRequest.SourceChannel); - - Pipe_ClearIN(); - Pipe_Freeze(); - - /* Search for the referenced channel in the channel information list */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionRequest.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_DisconnectionResp_t DisconnectionResponse; - } ResponsePacket; - - /* Fill out the Signal Command header in the response packet */ - ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_RESPONSE; - ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; - ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.DisconnectionResponse); - - /* Fill out the Disconnection Response in the response packet */ - ResponsePacket.DisconnectionResponse.DestinationChannel = (ChannelData != NULL) ? ChannelData->RemoteNumber : 0; - ResponsePacket.DisconnectionResponse.SourceChannel = (ChannelData != NULL) ? ChannelData->LocalNumber : 0; - - Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); - - /* If the channel was found in the channel list, close it */ - if (ChannelData != NULL) - ChannelData->State = BT_Channel_Closed; - - BT_ACL_DEBUG(1, ">> L2CAP Disconnection Response"); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ResponsePacket.DisconnectionResponse.SourceChannel); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ResponsePacket.DisconnectionResponse.DestinationChannel); -} - -/** Internal Bluetooth stack Signal Command processing routine for a Disconnection Response command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_DisconnectionResp_t DisconnectionResponse; - - Pipe_Read_Stream_LE(&DisconnectionResponse, sizeof(DisconnectionResponse), NULL); - - BT_ACL_DEBUG(1, "<< L2CAP Disconnection Response"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionResponse.DestinationChannel); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionResponse.SourceChannel); - - Pipe_ClearIN(); - Pipe_Freeze(); - - /* Search for the referenced channel in the channel information list */ - Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - - /* If the channel was found in the channel list, close it */ - if (ChannelData != NULL) - ChannelData->State = BT_Channel_Closed; -} - -/** Internal Bluetooth stack Signal Command processing routine for an Echo Request command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_ACL_DEBUG(1, "<< L2CAP Echo Request"); - - Pipe_ClearIN(); - Pipe_Freeze(); - - struct - { - BT_Signal_Header_t SignalCommandHeader; - } ResponsePacket; - - /* Fill out the Signal Command header in the response packet */ - ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_ECHO_RESPONSE; - ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; - ResponsePacket.SignalCommandHeader.Length = 0; - - Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Echo Response"); -} - -/** Internal Bluetooth stack Signal Command processing routine for an Information Request command. - * - * \param[in] SignalCommandHeader Pointer to the start of the received packet's Signal Command header - */ -static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader) -{ - BT_Signal_InformationReq_t InformationRequest; - - Pipe_Read_Stream_LE(&InformationRequest, sizeof(InformationRequest), NULL); - - BT_ACL_DEBUG(1, "<< L2CAP Information Request"); - BT_ACL_DEBUG(2, "-- Info Type: 0x%04X", InformationRequest.InfoType); - - Pipe_ClearIN(); - Pipe_Freeze(); - - struct - { - BT_Signal_Header_t SignalCommandHeader; - BT_Signal_InformationResp_t InformationResponse; - - uint8_t Data[4]; - } ResponsePacket; - - uint8_t DataLen = 0; - - /* Retrieve the requested information and store it in the outgoing packet, if found */ - switch (InformationRequest.InfoType) - { - case BT_INFOREQ_MTU: - ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL; - DataLen = 2; - - *((uint16_t*)&ResponsePacket.Data) = MAXIMUM_CHANNEL_MTU; - break; - case BT_INFOREQ_EXTENDEDFEATURES: - ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL; - DataLen = 4; - - *((uint32_t*)&ResponsePacket.Data) = 0; - break; - default: - ResponsePacket.InformationResponse.Result = BT_INFORMATION_NOTSUPPORTED; - DataLen = 0; - break; - } - - /* Fill out the Signal Command header in the response packet */ - ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_INFORMATION_RESPONSE; - ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; - ResponsePacket.SignalCommandHeader.Length = sizeof(ResponsePacket.InformationResponse) + DataLen; - - /* Fill out the Information Response in the response packet */ - ResponsePacket.InformationResponse.InfoType = InformationRequest.InfoType; - - Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket) - sizeof(ResponsePacket.Data) + DataLen), NULL); - - BT_ACL_DEBUG(1, ">> L2CAP Information Response"); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.InformationResponse.Result); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h deleted file mode 100644 index c9a4ac4a9..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BluetoothACLPackets.c. - */ - -#ifndef _BLUETOOTH_ACLPACKETS_ -#define _BLUETOOTH_ACLPACKETS_ - - /* Includes: */ - #include - #include - #include - #include - - #include - #include - - #include "BluetoothStack.h" - - /* Macros: */ - #define BT_ACL_DEBUG(l, s, ...) do { if (ACL_DEBUG_LEVEL >= l) printf_P(PSTR("(ACL) " s "\r\n"), ##__VA_ARGS__); } while (0) - #define ACL_DEBUG_LEVEL 0 - - /** Lowest possible channel number for L2CAP data channels. */ - #define BT_CHANNELNUMBER_BASEOFFSET 0x0040 - - /** Bluetooth specification defined channel number for signaling commands. */ - #define BT_CHANNEL_SIGNALING 0x0001 - - /** Bluetooth specification defined channel number for connectionless data. */ - #define BT_CHANNEL_CONNECTIONLESS 0x0002 - - #define BT_ACL_FIRST_AUTOFLUSH (1 << 13) - - #define BT_SIGNAL_COMMAND_REJECT 0x01 - #define BT_SIGNAL_CONNECTION_REQUEST 0x02 - #define BT_SIGNAL_CONNECTION_RESPONSE 0x03 - #define BT_SIGNAL_CONFIGURATION_REQUEST 0x04 - #define BT_SIGNAL_CONFIGURATION_RESPONSE 0x05 - #define BT_SIGNAL_DISCONNECTION_REQUEST 0x06 - #define BT_SIGNAL_DISCONNECTION_RESPONSE 0x07 - #define BT_SIGNAL_ECHO_REQUEST 0x08 - #define BT_SIGNAL_ECHO_RESPONSE 0x09 - #define BT_SIGNAL_INFORMATION_REQUEST 0x0A - #define BT_SIGNAL_INFORMATION_RESPONSE 0x0B - - #define BT_INFOREQ_MTU 0x0001 - #define BT_INFOREQ_EXTENDEDFEATURES 0x0002 - - #define BT_INFORMATION_SUCCESSFUL 0x0000 - #define BT_INFORMATION_NOTSUPPORTED 0x0001 - - #define BT_CONNECTION_SUCCESSFUL 0x0000 - #define BT_CONNECTION_REFUSED_PSM 0x0002 - #define BT_CONNECTION_REFUSED_RESOURCES 0x0004 - - #define BT_CONFIGURATION_SUCCESSFUL 0x0000 - #define BT_CONFIGURATION_REJECTED 0x0002 - #define BT_CONFIGURATION_UNKNOWNOPTIONS 0x0003 - - #define BT_CONFIG_OPTION_MTU 1 - - /* Type Defines: */ - /** Bluetooth ACL header structure, common to all ACL data packets. */ - typedef struct - { - uint16_t ConnectionHandle; /**< Unique device connection handle of the ACL packet */ - uint16_t DataLength; /**< Length of the packet payload, in bytes */ - } BT_ACL_Header_t; - - /** Bluetooth ACL data packet header structure, for ACL packets containing L2CAP data. */ - typedef struct - { - uint16_t PayloadLength; /**< Size of the data payload, in bytes */ - uint16_t DestinationChannel; /**< Destination channel in the device the data is directed to */ - } BT_DataPacket_Header_t; - - /** Bluetooth signaling command header structure, for all ACL packets containing a signaling command. */ - typedef struct - { - uint8_t Code; /**< Signal code, a \c BT_SIGNAL_* mask value */ - uint8_t Identifier; /**< Unique signal command identifier to link requests and responses */ - uint16_t Length; /**< Length of the signaling command data, in bytes */ - } BT_Signal_Header_t; - - /** Connection Request signaling command structure, for channel connection requests. */ - typedef struct - { - uint16_t PSM; /**< Type of data the channel will carry, a \c CHANNEL_PSM_* mask value */ - uint16_t SourceChannel; /**< Channel source on the sending device this channel will link to */ - } BT_Signal_ConnectionReq_t; - - /** Connection response signaling command structure, for responses to channel connection requests. */ - typedef struct - { - uint16_t DestinationChannel; /**< Destination device channel that the connection request was processed on */ - uint16_t SourceChannel; /**< Source device channel address that the connection request came from */ - uint16_t Result; /**< Connection result, a \c BT_CONNECTION_* mask value */ - uint16_t Status; /**< Status of the request if the result was set to the Pending value */ - } BT_Signal_ConnectionResp_t; - - /** Disconnection request signaling command structure, for channel disconnection requests. */ - typedef struct - { - uint16_t DestinationChannel; /**< Destination channel address which is to be disconnected */ - uint16_t SourceChannel; /**< Source channel address which is to be disconnected */ - } BT_Signal_DisconnectionReq_t; - - /** Disconnection response signaling command structure, for responses to channel disconnection requests. */ - typedef struct - { - uint16_t DestinationChannel; /**< Destination channel address which was disconnected */ - uint16_t SourceChannel; /**< Source channel address which was disconnected */ - } BT_Signal_DisconnectionResp_t; - - /** Configuration Request signaling command structure, for channel configuration requests. */ - typedef struct - { - uint16_t DestinationChannel; /**< Destination channel address which is to be configured */ - uint16_t Flags; /**< Configuration flags for the request, including command continuation */ - } BT_Signal_ConfigurationReq_t; - - /** Configuration Response signaling command structure, for responses to channel configuration requests. */ - typedef struct - { - uint16_t SourceChannel; /**< Source channel that the configuration request was directed at */ - uint16_t Flags; /**< Configuration flags for the response, including response continuation */ - uint16_t Result; /**< Configuration result, a \c BT_CONFIGURATION_* mask value */ - } BT_Signal_ConfigurationResp_t; - - /** Information Request signaling command structure, for device information requests. */ - typedef struct - { - uint16_t InfoType; /**< Data type that is being requested, a \c BT_INFOREQ_* mask value */ - } BT_Signal_InformationReq_t; - - /** Information Response signaling command structure, for responses to information requests. */ - typedef struct - { - uint16_t InfoType; /**< Data type that was requested, a \c BT_INFOREQ_* mask value */ - uint16_t Result; /**< Result of the request, a \c BT_INFORMATION_* mask value */ - } BT_Signal_InformationResp_t; - - /** Configuration Option header structure, placed at the start of each option in a Channel Configuration - * request's options list. - */ - typedef struct - { - uint8_t Type; /**< Option type, a \c BT_CONFIG_OPTION_* mask value */ - uint8_t Length; /**< Length of the option's value, in bytes */ - } BT_Config_Option_Header_t; - - /* Function Prototypes: */ - void Bluetooth_ACLTask(void); - - #if defined(INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C) - static void Bluetooth_ProcessIncomingACLPackets(void); - - static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader); - static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader); - #endif - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h deleted file mode 100644 index 589685b75..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h +++ /dev/null @@ -1,118 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Bluetooth class codes, used to describe the type and overall function of a - * Bluetooth device to other Bluetooth devices. - */ - -#ifndef _BLUETOOTH_CLASS_CODES_H_ -#define _BLUETOOTH_CLASS_CODES_H_ - - /* Macros: */ - #define DEVICE_CLASS_SERVICE_POSITIONING (1UL << 16) - #define DEVICE_CLASS_SERVICE_NETWORKING (1UL << 17) - #define DEVICE_CLASS_SERVICE_RENDERING (1UL << 18) - #define DEVICE_CLASS_SERVICE_CAPTURING (1UL << 19) - #define DEVICE_CLASS_SERVICE_OBJECTTRANSFER (1UL << 20) - #define DEVICE_CLASS_SERVICE_AUDIO (1UL << 21) - #define DEVICE_CLASS_SERVICE_TELEPHONY (1UL << 22) - #define DEVICE_CLASS_SERVICE_INFORMATION (1UL << 23) - - #define DEVICE_CLASS_MAJOR_MISC (0x00 << 8) - #define DEVICE_CLASS_MAJOR_COMPUTER (0x01 << 8) - #define DEVICE_CLASS_MAJOR_PHONE (0x02 << 8) - #define DEVICE_CLASS_MAJOR_LAN (0x03 << 8) - #define DEVICE_CLASS_MAJOR_AUDIOVIDEO (0x04 << 8) - #define DEVICE_CLASS_MAJOR_PERIPHERAL (0x05 << 8) - #define DEVICE_CLASS_MAJOR_IMAGING (0x06 << 8) - #define DEVICE_CLASS_MAJOR_UNCLASSIFIED (0x1F << 8) - - #define DEVICE_CLASS_MINOR_COMPUTER_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_DESKTOP (0x01 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_SERVER (0x02 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_LAPTOP (0x03 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_HANDHELD (0x04 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_PALM (0x05 << 2) - #define DEVICE_CLASS_MINOR_COMPUTER_WEARABLE (0x06 << 2) - - #define DEVICE_CLASS_MINOR_PHONE_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_PHONE_CELLULAR (0x01 << 2) - #define DEVICE_CLASS_MINOR_PHONE_CORDLESS (0x02 << 2) - #define DEVICE_CLASS_MINOR_PHONE_SMARTPHONE (0x03 << 2) - #define DEVICE_CLASS_MINOR_PHONE_WIREDMODEM (0x04 << 2) - #define DEVICE_CLASS_MINOR_PHONE_ISDN (0x05 << 2) - - #define DEVICE_CLASS_MINOR_LAN_FULLY_AVAILABLE (0x00 << 5) - #define DEVICE_CLASS_MINOR_LAN_1_TO_17_PC_UTILIZED (0x01 << 5) - #define DEVICE_CLASS_MINOR_LAN_17_TO_33_PC_UTILIZED (0x02 << 5) - #define DEVICE_CLASS_MINOR_LAN_33_TO_50_PC_UTILIZED (0x03 << 5) - #define DEVICE_CLASS_MINOR_LAN_50_TO_67_PC_UTILIZED (0x04 << 5) - #define DEVICE_CLASS_MINOR_LAN_67_TO_83_PC_UTILIZED (0x05 << 5) - #define DEVICE_CLASS_MINOR_LAN_83_TO_99_PC_UTILIZED (0x06 << 5) - #define DEVICE_CLASS_MINOR_LAN_NO_SERVICE_AVAILABLE (0x07 << 5) - - #define DEVICE_CLASS_MINOR_AV_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_AV_HEADSET (0x01 << 2) - #define DEVICE_CLASS_MINOR_AV_HANDSFREE (0x02 << 2) - #define DEVICE_CLASS_MINOR_AV_MICROPHONE (0x04 << 2) - #define DEVICE_CLASS_MINOR_AV_LOUDSPEAKER (0x05 << 2) - #define DEVICE_CLASS_MINOR_AV_HEADPHONES (0x06 << 2) - #define DEVICE_CLASS_MINOR_AV_PORTABLE_AUDIO (0x07 << 2) - #define DEVICE_CLASS_MINOR_AV_CARAUDIO (0x08 << 2) - #define DEVICE_CLASS_MINOR_AV_SETTOP_BOX (0x09 << 2) - #define DEVICE_CLASS_MINOR_AV_HIFI (0x0A << 2) - #define DEVICE_CLASS_MINOR_AV_VCR (0x0B << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_CAMERA (0x0C << 2) - #define DEVICE_CLASS_MINOR_AV_CAMCORDER (0x0D << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_MONITOR (0x0E << 2) - #define DEVICE_CLASS_MINOR_AV_DISPLAY_AND_LOUDSPEAKER (0x0F << 2) - #define DEVICE_CLASS_MINOR_AV_VIDEO_CONFERENCING (0x10 << 2) - #define DEVICE_CLASS_MINOR_AV_GAMING_TOY (0x12 << 2) - - #define DEVICE_CLASS_MINOR_PERIPHERAL_KEYBOARD (0x01 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_POINTING (0x02 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_COMBO (0x03 << 6) - #define DEVICE_CLASS_MINOR_PERIPHERAL_UNCATEGORIZED (0x00 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_JOYSTICK (0x01 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_GAMEPAD (0x02 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_REMOTE_CONTROL (0x03 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_SENSING_DEVICE (0x04 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_DIGITIZER (0x05 << 2) - #define DEVICE_CLASS_MINOR_PERIPHERAL_CARD_READER (0x06 << 2) - - #define DEVICE_CLASS_MINOR_IMAGING_DISPLAY (1 << 4) - #define DEVICE_CLASS_MINOR_IMAGING_CAMERA (1 << 5) - #define DEVICE_CLASS_MINOR_IMAGING_SCANNER (1 << 6) - #define DEVICE_CLASS_MINOR_IMAGING_PRINTER (1 << 7) - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c deleted file mode 100644 index 6c555f7ae..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c +++ /dev/null @@ -1,406 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Bluetooth HCI layer management code. This module manages the overall - * Bluetooth stack connection state to and from other devices, processes - * received events from the Bluetooth controller, and issues commands to - * modify the controller's configuration, such as the broadcast name of the - * device. - */ - -/* - TODO: Add local to remote device connections - */ - -#define INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C -#include "BluetoothHCICommands.h" - -/** Temporary Bluetooth Device Address, for HCI responses which must include the destination address */ -static uint8_t Bluetooth_TempDeviceAddress[6]; - -/** Bluetooth HCI processing task. This task should be called repeatedly the main Bluetooth - * stack task to manage the HCI processing state. - */ -void Bluetooth_HCITask(void) -{ - BT_HCICommand_Header_t HCICommandHeader; - - switch (Bluetooth_State.CurrentHCIState) - { - case Bluetooth_ProcessEvents: - Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE); - Pipe_Unfreeze(); - - if (Pipe_IsReadWriteAllowed()) - { - BT_HCIEvent_Header_t HCIEventHeader; - - /* Read in the event header to fetch the event code and payload length */ - Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader), NULL); - - /* Create a temporary buffer for the event parameters */ - uint8_t EventParams[HCIEventHeader.ParameterLength]; - - /* Read in the event parameters into the temporary buffer */ - Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength, NULL); - Pipe_ClearIN(); - - BT_HCI_DEBUG(1, "Event Received (0x%02X)", HCIEventHeader.EventCode); - - switch (HCIEventHeader.EventCode) - { - case EVENT_COMMAND_COMPLETE: - BT_HCI_DEBUG(1, "<< Command Complete"); - - /* Check which operation was completed in case we need to process the even parameters */ - switch (((BT_HCIEvent_CommandComplete_t*)&EventParams)->Opcode) - { - case (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBDADDR): - /* A READ BDADDR command completed, copy over the local device's BDADDR from the response */ - memcpy(Bluetooth_State.LocalBDADDR, - &((BT_HCIEvent_CommandComplete_t*)&EventParams)->ReturnParams[1], - sizeof(Bluetooth_State.LocalBDADDR)); - break; - } - - Bluetooth_State.CurrentHCIState = Bluetooth_State.NextHCIState; - break; - case EVENT_COMMAND_STATUS: - BT_HCI_DEBUG(1, "<< Command Status"); - BT_HCI_DEBUG(2, "-- Status Code: 0x%02X", (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status)); - - /* If the execution of a command failed, reset the stack */ - if (((BT_HCIEvent_CommandStatus_t*)&EventParams)->Status) - Bluetooth_State.CurrentHCIState = Bluetooth_Init; - break; - case EVENT_CONNECTION_REQUEST: - BT_HCI_DEBUG(1, "<< Connection Request"); - BT_HCI_DEBUG(2, "-- Link Type: 0x%02X", (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType)); - - /* Need to store the remote device's BT address in a temporary buffer for later use */ - memcpy(Bluetooth_TempDeviceAddress, - &((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - - bool IsACLConnection = (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType == 0x01); - - /* Only accept the connection if it is a ACL (data) connection, a device is not already connected - and the user application has indicated that the connection should be allowed */ - Bluetooth_State.CurrentHCIState = (Bluetooth_Connection.IsConnected || !(IsACLConnection) || - !(Bluetooth_ConnectionRequest(Bluetooth_TempDeviceAddress))) ? - Bluetooth_Conn_RejectConnection : Bluetooth_Conn_AcceptConnection; - - BT_HCI_DEBUG(2, "-- Connection %S", (Bluetooth_State.CurrentHCIState == Bluetooth_Conn_RejectConnection) ? - PSTR("REJECTED") : PSTR("ACCEPTED")); - - break; - case EVENT_PIN_CODE_REQUEST: - BT_HCI_DEBUG(1, "<< Pin Code Request"); - - /* Need to store the remote device's BT address in a temporary buffer for later use */ - memcpy(Bluetooth_TempDeviceAddress, - &((BT_HCIEvent_PinCodeReq_t*)&EventParams)->RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - - Bluetooth_State.CurrentHCIState = Bluetooth_Conn_SendPINCode; - break; - case EVENT_LINK_KEY_REQUEST: - BT_HCI_DEBUG(1, "<< Link Key Request"); - - /* Need to store the remote device's BT address in a temporary buffer for later use */ - memcpy(Bluetooth_TempDeviceAddress, - &((BT_HCIEvent_LinkKeyReq_t*)&EventParams)->RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - - Bluetooth_State.CurrentHCIState = Bluetooth_Conn_SendLinkKeyNAK; - break; - case EVENT_CONNECTION_COMPLETE: - BT_HCI_DEBUG(1, "<< Connection Complete"); - BT_HCI_DEBUG(2, "-- Handle: 0x%04X", ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle); - - /* Need to store the remote device's BT address in a temporary buffer for later use */ - memcpy(Bluetooth_Connection.RemoteAddress, - &((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - - /* Store the created connection handle and indicate that the connection has been established */ - Bluetooth_Connection.ConnectionHandle = ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle; - Bluetooth_Connection.IsConnected = true; - - Bluetooth_ConnectionComplete(); - break; - case EVENT_DISCONNECTION_COMPLETE: - BT_HCI_DEBUG(1, "<< Disconnection Complete"); - - /* Device disconnected, indicate connection information no longer valid */ - Bluetooth_Connection.IsConnected = false; - - Bluetooth_DisconnectionComplete(); - break; - } - } - - Pipe_Freeze(); - - break; - case Bluetooth_Init: - BT_HCI_DEBUG(1, "# Init"); - - Bluetooth_State.IsInitialized = false; - - /* Reset the connection information structure to destroy any previous connection state */ - memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection)); - - Bluetooth_State.CurrentHCIState = Bluetooth_Init_Reset; - break; - case Bluetooth_Init_Reset: - BT_HCI_DEBUG(1, "# Reset"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_RESET), - ParameterLength: 0, - }; - - /* Send the command to reset the Bluetooth dongle controller */ - Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0); - - Bluetooth_State.NextHCIState = Bluetooth_Init_ReadBufferSize; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_ReadBufferSize: - BT_HCI_DEBUG(1, "# Read Buffer Size"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE), - ParameterLength: 0, - }; - - /* Send the command to read the Bluetooth buffer size (mandatory before device sends any data) */ - Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0); - - Bluetooth_State.NextHCIState = Bluetooth_Init_GetBDADDR; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_GetBDADDR: - BT_HCI_DEBUG(1, "# Get BDADDR"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBDADDR), - ParameterLength: 0, - }; - - /* Send the command to retrieve the BDADDR of the inserted Bluetooth dongle */ - Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0); - - Bluetooth_State.NextHCIState = Bluetooth_Init_SetLocalName; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_SetLocalName: - BT_HCI_DEBUG(1, "# Set Local Name"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME), - ParameterLength: 248, - }; - - /* Send the command to set the Bluetooth dongle's name for other devices to see */ - Bluetooth_SendHCICommand(&HCICommandHeader, Bluetooth_DeviceConfiguration.Name, strlen(Bluetooth_DeviceConfiguration.Name)); - - Bluetooth_State.NextHCIState = Bluetooth_Init_SetDeviceClass; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_SetDeviceClass: - BT_HCI_DEBUG(1, "# Set Device Class"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE), - ParameterLength: 3, - }; - - /* Send the command to set the class of the device for other devices to see */ - Bluetooth_SendHCICommand(&HCICommandHeader, &Bluetooth_DeviceConfiguration.Class, 3); - - Bluetooth_State.NextHCIState = Bluetooth_Init_WriteScanEnable; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_WriteScanEnable: - BT_HCI_DEBUG(1, "# Write Scan Enable"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_CTRLR_BASEBAND | OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE), - ParameterLength: 1, - }; - - uint8_t Interval = BT_SCANMODE_InquiryAndPageScans; - - /* Send the command to set the remote device scanning mode */ - Bluetooth_SendHCICommand(&HCICommandHeader, &Interval, 1); - - Bluetooth_State.NextHCIState = Bluetooth_Init_FinalizeInit; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Init_FinalizeInit: - Bluetooth_State.IsInitialized = true; - - /* Fire the user application callback to indicate that the stack is now fully initialized */ - Bluetooth_StackInitialized(); - - Bluetooth_State.NextHCIState = Bluetooth_ProcessEvents; - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Conn_AcceptConnection: - BT_HCI_DEBUG(1, "# Accept Connection"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST), - ParameterLength: sizeof(BT_HCICommand_AcceptConnectionReq_t), - }; - - /* Copy over the temporary BT device address saved from the Connection Request event, indicate slave - connection role */ - BT_HCICommand_AcceptConnectionReq_t AcceptConnectionParams; - memcpy(AcceptConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, - sizeof(AcceptConnectionParams.RemoteAddress)); - AcceptConnectionParams.SlaveRole = true; - - /* Send the command to accept the remote connection request */ - Bluetooth_SendHCICommand(&HCICommandHeader, &AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t)); - - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Conn_RejectConnection: - BT_HCI_DEBUG(1, "# Reject Connection"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST), - ParameterLength: sizeof(BT_HCICommand_RejectConnectionReq_t), - }; - - /* Copy over the temporary BT device address saved from the Connection Request event, indicate failure - to accept the connection due to limited device resources or incorrect device address */ - BT_HCICommand_RejectConnectionReq_t RejectConnectionParams; - memcpy(RejectConnectionParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(RejectConnectionParams.RemoteAddress)); - RejectConnectionParams.Reason = Bluetooth_Connection.IsConnected ? ERROR_LIMITED_RESOURCES : ERROR_UNACCEPTABLE_BDADDR; - - /* Send the command to reject the remote connection request */ - Bluetooth_SendHCICommand(&HCICommandHeader, &RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t)); - - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Conn_SendPINCode: - BT_HCI_DEBUG(1, "# Send Pin Code"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY), - ParameterLength: sizeof(BT_HCICommand_PinCodeResp_t), - }; - - /* Copy over the temporary BT device address saved from the PIN Code Request event, copy over the - local PIN authentication code to the response */ - BT_HCICommand_PinCodeResp_t PINCodeRequestParams; - memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress)); - PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode); - memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode)); - - /* Send the command to transmit the device's local PIN number for authentication */ - Bluetooth_SendHCICommand(&HCICommandHeader, &PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t)); - - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - case Bluetooth_Conn_SendLinkKeyNAK: - BT_HCI_DEBUG(1, "# Send Link Key NAK"); - - HCICommandHeader = (BT_HCICommand_Header_t) - { - OpCode: (OGF_LINK_CONTROL | OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY), - ParameterLength: sizeof(BT_HCICommand_LinkKeyNAKResp_t), - }; - - /* Copy over the temporary BT device address saved from the Link Key Request event */ - BT_HCICommand_LinkKeyNAKResp_t LinkKeyNAKParams; - memcpy(LinkKeyNAKParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(LinkKeyNAKParams.RemoteAddress)); - - /* Send the command to transmit the link key NAK to the receiver */ - Bluetooth_SendHCICommand(&HCICommandHeader, &LinkKeyNAKParams, sizeof(BT_HCICommand_LinkKeyNAKResp_t)); - - Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; - break; - } -} - -/** Sends a Bluetooth HCI control command to the attached Bluetooth device. - * - * \param[in] HCICommandHeader HCI command header to send to the attached device - * \param[in] Parameters Pointer to the source of the control parameters (if any) - * \param[in] ParameterLength Length of the parameters to send in bytes - * - * \return A value from the USB_Host_SendControlErrorCodes_t enum. - */ -static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCICommandHeader, - const void* Parameters, - const uint16_t ParameterLength) -{ - /* Need to reserve the amount of bytes given in the header for the complete payload */ - uint8_t CommandBuffer[sizeof(BT_HCICommand_Header_t) + HCICommandHeader->ParameterLength]; - - USB_ControlRequest = (USB_Request_Header_t) - { - .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_DEVICE), - .bRequest = 0, - .wValue = 0, - .wIndex = 0, - .wLength = sizeof(CommandBuffer) - }; - - /* Copy over the HCI command header to the allocated buffer */ - memcpy(CommandBuffer, HCICommandHeader, sizeof(BT_HCICommand_Header_t)); - - /* Zero out the parameter section of the response so that all padding bytes are known to be zero */ - memset(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], 0x00, HCICommandHeader->ParameterLength); - - /* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes - may differ to those in the header; any difference in length is filled with 0x00 padding bytes */ - memcpy(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], Parameters, ParameterLength); - - Pipe_SelectPipe(PIPE_CONTROLPIPE); - return USB_Host_SendControlRequest(CommandBuffer); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h deleted file mode 100644 index 434e3ead4..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h +++ /dev/null @@ -1,213 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BluetoothHCICommands.c. - */ - -#ifndef _BLUETOOTH_HCICOMMANDS_H_ -#define _BLUETOOTH_HCICOMMANDS_H_ - - /* Includes: */ - #include - #include - #include - #include - - #include - #include - - #include "BluetoothStack.h" - #include "BluetoothClassCodes.h" - - /* Macros: */ - #define BT_HCI_DEBUG(l, s, ...) do { if (HCI_DEBUG_LEVEL >= l) printf_P(PSTR("(HCI) " s "\r\n"), ##__VA_ARGS__); } while (0) - #define HCI_DEBUG_LEVEL 0 - - #define OGF_LINK_CONTROL (0x01 << 10) - #define OGF_CTRLR_BASEBAND (0x03 << 10) - #define OGF_CTRLR_INFORMATIONAL (0x04 << 10) - - #define OCF_LINK_CONTROL_INQUIRY 0x0001 - #define OCF_LINK_CONTROL_INQUIRY_CANCEL 0x0002 - #define OCF_LINK_CONTROL_PERIODIC_INQUIRY 0x0003 - #define OCF_LINK_CONTROL_EXIT_PERIODIC_INQUIRY 0x0004 - #define OCF_LINK_CONTROL_CREATE_CONNECTION 0x0005 - #define OCF_LINK_CONTROL_DISCONNECT 0x0006 - #define OCF_LINK_CONTROL_CREATE_CONNECTION_CANCEL 0x0008 - #define OCF_LINK_CONTROL_ACCEPT_CONNECTION_REQUEST 0x0009 - #define OCF_LINK_CONTROL_REJECT_CONNECTION_REQUEST 0x000A - #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_REPLY 0x000B - #define OCF_LINK_CONTROL_LINK_KEY_REQUEST_NEG_REPLY 0x000C - #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_REPLY 0x000D - #define OCF_LINK_CONTROL_PIN_CODE_REQUEST_NEG_REPLY 0x000E - #define OCF_LINK_CONTROL_CHANGE_CONNECTION_PACKET_TYPE 0x000F - #define OCF_LINK_CONTROL_REMOTE_NAME_REQUEST 0x0019 - #define OCF_CTRLR_BASEBAND_SET_EVENT_MASK 0x0001 - #define OCF_CTRLR_BASEBAND_RESET 0x0003 - #define OCF_CTRLR_BASEBAND_WRITE_PIN_TYPE 0x000A - #define OCF_CTRLR_BASEBAND_WRITE_LOCAL_NAME 0x0013 - #define OCF_CTRLR_BASEBAND_READ_LOCAL_NAME 0x0014 - #define OCF_CTRLR_BASEBAND_WRITE_SCAN_ENABLE 0x001A - #define OCF_CTRLR_BASEBAND_WRITE_CLASS_OF_DEVICE 0x0024 - #define OCF_CTRLR_BASEBAND_WRITE_SIMPLE_PAIRING_MODE 0x0056 - #define OCF_CTRLR_BASEBAND_WRITE_AUTHENTICATION_ENABLE 0x0020 - #define OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE 0x0005 - #define OCF_CTRLR_INFORMATIONAL_READBDADDR 0x0009 - - #define EVENT_COMMAND_STATUS 0x0F - #define EVENT_COMMAND_COMPLETE 0x0E - #define EVENT_CONNECTION_COMPLETE 0x03 - #define EVENT_CONNECTION_REQUEST 0x04 - #define EVENT_DISCONNECTION_COMPLETE 0x05 - #define EVENT_REMOTE_NAME_REQUEST_COMPLETE 0x07 - #define EVENT_PIN_CODE_REQUEST 0x16 - #define EVENT_LINK_KEY_REQUEST 0x17 - - #define ERROR_LIMITED_RESOURCES 0x0D - #define ERROR_UNACCEPTABLE_BDADDR 0x0F - - /* Type Defines: */ - typedef struct - { - uint16_t OpCode; - uint8_t ParameterLength; - uint8_t Parameters[]; - } BT_HCICommand_Header_t; - - typedef struct - { - uint8_t EventCode; - uint8_t ParameterLength; - } BT_HCIEvent_Header_t; - - typedef struct - { - uint8_t Status; - uint8_t Packets; - uint16_t OpCode; - } BT_HCIEvent_CommandStatus_t; - - typedef struct - { - uint8_t HCIPacketsAllowable; - uint16_t Opcode; - uint8_t ReturnParams[]; - } BT_HCIEvent_CommandComplete_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t ClassOfDevice_Service; - uint16_t ClassOfDevice_MajorMinor; - uint8_t LinkType; - } BT_HCIEvent_ConnectionRequest_t; - - typedef struct - { - uint8_t Status; - uint16_t ConnectionHandle; - uint8_t RemoteAddress[6]; - uint8_t LinkType; - uint8_t EncryptionEnabled; - } BT_HCIEvent_ConnectionComplete_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - } BT_HCIEvent_PinCodeReq_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - } BT_HCIEvent_LinkKeyReq_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - } BT_HCICommand_LinkKeyNAKResp_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t PINCodeLength; - char PINCode[16]; - } BT_HCICommand_PinCodeResp_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t SlaveRole; - } BT_HCICommand_AcceptConnectionReq_t; - - typedef struct - { - uint8_t RemoteAddress[6]; - uint8_t Reason; - } BT_HCICommand_RejectConnectionReq_t; - - /* Enums: */ - enum BT_ScanEnable_Modes_t - { - BT_SCANMODE_NoScansEnabled = 0, - BT_SCANMODE_InquiryScanOnly = 1, - BT_SCANMODE_PageScanOnly = 2, - BT_SCANMODE_InquiryAndPageScans = 3, - }; - - enum BT_HCIStates_t - { - Bluetooth_ProcessEvents = 0, - Bluetooth_Init = 1, - Bluetooth_Init_Reset = 2, - Bluetooth_Init_ReadBufferSize = 3, - Bluetooth_Init_GetBDADDR = 4, - Bluetooth_Init_SetLocalName = 5, - Bluetooth_Init_SetDeviceClass = 6, - Bluetooth_Init_WriteScanEnable = 7, - Bluetooth_Init_FinalizeInit = 8, - Bluetooth_Conn_AcceptConnection = 9, - Bluetooth_Conn_RejectConnection = 10, - Bluetooth_Conn_SendPINCode = 11, - Bluetooth_Conn_SendLinkKeyNAK = 12, - }; - - /* Function Prototypes: */ - void Bluetooth_HCITask(void); - - #if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C) - static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCICommandHeader, - const void* Parameters, - const uint16_t ParameterLength); - #endif - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c deleted file mode 100644 index ef8aa775c..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main module for the Bluetooth stack. This module contains the overall Bluetooth - * stack state variables and the main Bluetooth stack management functions. - */ - -#include "BluetoothStack.h" - -/** Bluetooth device connection information structure. Once connected to a remote device, this structure tracks the - * connection state of the individual L2CAP channels. - */ -Bluetooth_Connection_t Bluetooth_Connection = { IsConnected: false }; - -/** Bluetooth device state information structure. This structure contains details on the current Bluetooth stack - * state. - */ -Bluetooth_Stack_State_t Bluetooth_State = { IsInitialized: false }; - -/** Bluetooth stack initialization function. This function must be called once to initialize the Bluetooth stack, - * ready for connection to remote devices. - * - * \note This function only begins the initialization process; the stack is initialized as the main Bluetooth stack - * management task is repeatedly called. The initialization process ends when the IsInitialized element of the - * \ref Bluetooth_State structure becomes true and the \ref Bluetooth_StackInitialized() callback fires. - */ -void Bluetooth_Stack_Init(void) -{ - /* Reset the HCI state machine - this will reset the adapter and stack when the Bluetooth stack task is called */ - Bluetooth_State.CurrentHCIState = Bluetooth_Init; - Bluetooth_State.NextHCIState = Bluetooth_Init; -} - -/** Bluetooth stack management task. This task must be repeatedly called to maintain the Bluetooth stack and any connection - * to remote Bluetooth devices, including both the HCI control layer and the ACL channel layer. - */ -void Bluetooth_Stack_USBTask(void) -{ - if (USB_HostState != HOST_STATE_Configured) - return; - - Bluetooth_HCITask(); - Bluetooth_ACLTask(); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h deleted file mode 100644 index ef95bd762..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for BluetoothStack.c. - */ - -#ifndef _BLUETOOTH_STACK_ -#define _BLUETOOTH_STACK_ - - /* Includes: */ - #include - - #include "../ConfigDescriptor.h" - - /* Macros: */ - #define BLUETOOTH_MAX_OPEN_CHANNELS 6 - - #define CHANNEL_PSM_SDP 0x0001 - #define CHANNEL_PSM_UDP 0x0002 - #define CHANNEL_PSM_RFCOMM 0x0003 - #define CHANNEL_PSM_TCP 0x0004 - #define CHANNEL_PSM_IP 0x0009 - #define CHANNEL_PSM_FTP 0x000A - #define CHANNEL_PSM_HTTP 0x000C - #define CHANNEL_PSM_UPNP 0x0010 - #define CHANNEL_PSM_HIDP 0x0011 - - #define CHANNEL_SEARCH_LOCALNUMBER 0 - #define CHANNEL_SEARCH_REMOTENUMBER 1 - #define CHANNEL_SEARCH_PSM 2 - - #define MAXIMUM_CHANNEL_MTU 255 - - /* Enums: */ - /** Enum for the possible states for a Bluetooth ACL channel. */ - enum BT_ChannelStates_t - { - BT_Channel_Closed = 0, /**< Channel is closed and inactive. No data may be sent or received. */ - BT_Channel_WaitConnect = 1, /**< A connection request has been received, but a response has not been sent. */ - BT_Channel_WaitConnectRsp = 2, /**< A connection request has been sent, but a response has not been received. */ - BT_Channel_Config_WaitConfig = 3, /**< Channel has been connected, but not yet configured on either end. */ - BT_Channel_Config_WaitSendConfig = 4, /**< Channel configuration has been received and accepted, but not yet sent. */ - BT_Channel_Config_WaitReqResp = 5, /**< Channel configuration has been sent but not responded to, and a configuration - * request from the remote end has not yet been received. - */ - BT_Channel_Config_WaitResp = 6, /**< Channel configuration has been sent but not accepted, but a configuration request - * from the remote end has been accepted. - */ - BT_Channel_Config_WaitReq = 7, /**< Channel configuration has been sent and accepted, but a configuration request - * from the remote end has not yet been accepted. - */ - BT_Channel_Open = 8, /**< Channel is open and ready to send or receive data */ - BT_Channel_WaitDisconnect = 9, /**< A disconnection request has been sent, but not yet acknowledged. */ - }; - - /** Enum for the possible error codes returned by the \ref Bluetooth_SendPacket() function. */ - enum BT_SendPacket_ErrorCodes_t - { - BT_SENDPACKET_NoError = 0, /**< The packet was sent successfully. */ - BT_SENDPACKET_NotConnected = 1, /**< The Bluetooth stack is not currently connected to a remote device. */ - BT_SENDPACKET_ChannelNotOpen = 2, /**< The given channel is not currently in the Open state. */ - }; - - /* Type Defines: */ - /** Type define for a Bluetooth ACL channel information structure. This structure contains all the relevant - * information on an ACL channel for data transmission and reception by the stack. - */ - typedef struct - { - uint8_t State; /**< Current channel state, a value from the \ref BT_ChannelStates_t enum. */ - uint16_t LocalNumber; /**< Local channel number on the device. */ - uint16_t RemoteNumber; /**< Remote channel number on the connected device. */ - uint16_t PSM; /**< Protocol used on the channel. */ - uint16_t LocalMTU; /**< MTU of data sent from the connected device to the local device. */ - uint16_t RemoteMTU; /**< MTU of data sent from the local device to the connected device. */ - } Bluetooth_Channel_t; - - /** Type define for a Bluetooth device connection information structure. This structure contains all the - * information needed to maintain a connection to a remote Bluetooth device via the Bluetooth stack. - */ - typedef struct - { - bool IsConnected; /**< Indicates if the stack is currently connected to a remote device - if this value is - * false, the remaining elements are invalid. - */ - uint16_t ConnectionHandle; /**< Connection handle to the remote device, used internally in the stack. */ - uint8_t RemoteAddress[6]; /**< Bluetooth device address of the attached remote device. */ - Bluetooth_Channel_t Channels[BLUETOOTH_MAX_OPEN_CHANNELS]; /**< Channel information structures for the connection. */ - uint8_t SignalingIdentifier; /**< Next Signaling Channel unique command sequence identifier. */ - } Bluetooth_Connection_t; - - /** Local Bluetooth device information structure, for the defining of local device characteristics for the Bluetooth stack. */ - typedef struct - { - uint32_t Class; /**< Class of the local device, a mask of \c DEVICE_CLASS_* masks. */ - char PINCode[16]; /**< Pin code required to send or receive in order to authenticate with a remote device. */ - char Name[]; /**< Name of the local Bluetooth device, up to 248 characters. */ - } Bluetooth_Device_t; - - /** Bluetooth stack state information structure, for the containment of the Bluetooth stack state. The values in - * this structure are set by the Bluetooth stack internally, and should all be treated as read only by the user - * application. - */ - typedef struct - { - uint8_t CurrentHCIState; /**< Current HCI state machine state. */ - uint8_t NextHCIState; /**< Next HCI state machine state to progress to once the currently issued command completes. */ - bool IsInitialized; /**< Indicates if the Bluetooth stack is currently initialized and ready for connections - * to or from a remote Bluetooth device. - */ - uint8_t LocalBDADDR[6]; /**< Local Bluetooth adapter's BDADDR, valid when the stack is fully initialized. */ - } Bluetooth_Stack_State_t; - - /* Includes: */ - #include "BluetoothHCICommands.h" - #include "BluetoothACLPackets.h" - - /* Function Prototypes: */ - void Bluetooth_Stack_Init(void); - void Bluetooth_Stack_USBTask(void); - - void Bluetooth_StackInitialized(void); - bool Bluetooth_ConnectionRequest(const uint8_t* RemoteAddress); - void Bluetooth_ConnectionComplete(void); - void Bluetooth_DisconnectionComplete(void); - bool Bluetooth_ChannelConnectionRequest(const uint16_t PSM); - void Bluetooth_PacketReceived(void* Data, uint16_t DataLen, - Bluetooth_Channel_t* const ACLChannel); - void Bluetooth_ChannelOpened(Bluetooth_Channel_t* const ACLChannel); - - Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue, - const uint8_t SearchKey); - Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM); - void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel); - uint8_t Bluetooth_SendPacket(void* Data, - uint16_t DataLen, - Bluetooth_Channel_t* const ACLChannel); - - /* External Variables: */ - extern Bluetooth_Device_t Bluetooth_DeviceConfiguration; - extern Bluetooth_Connection_t Bluetooth_Connection; - extern Bluetooth_Stack_State_t Bluetooth_State; - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c deleted file mode 100644 index c6b7f097c..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c +++ /dev/null @@ -1,417 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * RFCOMM layer module. This module manages the RFCOMM layer of the - * stack, providing virtual serial port channels on top of the lower - * L2CAP layer. - */ - -#define INCLUDE_FROM_RFCOMM_C -#include "RFCOMM.h" - -/** 8-Bit CRC table used by the FCS field of each RFCOMM encoded frame, sourced from the ETSI TS 101 369 V7.2.0 - * specification document, upon which the RFCOMM specification is based. - */ -const uint8_t CRC8_Table[256] PROGMEM = - { - 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B, - 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67, - 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43, - 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F, - 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B, - 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17, - 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33, - 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F, - 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B, - 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87, - 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3, - 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF, - 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB, - 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7, - 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3, - 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF - }; - -/** RFCOMM channel state structure, to retain information about each open channel in the RFCOMM multiplexer. */ -RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS]; - - -/** Initializes the RFCOMM service, ready for new connections from a SDP client. */ -void RFCOMM_Initialize(void) -{ - /* Reset the RFCOMM channel structures, to invalidate any configured RFCOMM channels */ - for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) - RFCOMM_Channels[i].State = RFCOMM_Channel_Closed; -} - -/** Services all the logical RFCOMM channels on the given ACL channel, sending any RFCOMM control requests to - * the remote device as needed to establish new logical RFCOMM channels. This function should be called repeatedly - * in the main program loop when an ACL channel with an RFCOMM PSM has been established between the local and remote - * device. - * - * \param[in] ACLChannel ACL channel which has been previously opened to handle RFCOMM traffic between devices - */ -void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel) -{ - /* Abort if the RFCOMM ACL channel is not currently open */ - if ((ACLChannel == NULL) || (ACLChannel->State != BT_Channel_Open)) - return; - - /* Loop through each of the RFCOMM channels, send any required RFCOMM control commands */ - for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) - { - RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i]; - - if (RFCOMMChannel->State == RFCOMM_Channel_Configure) - { - /* Check if the local signals have not yet been sent on the current channel */ - if (!(RFCOMMChannel->ConfigFlags & RFCOMM_CONFIG_LOCALSIGNALSSENT)) - { - /* Indicate that the local signals have been sent, transmit them to the remote device */ - RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALSSENT; - RFCOMM_SendChannelSignals(RFCOMMChannel, ACLChannel); - } - - /* If signals have been configured in both directions, progress to the open state */ - if ((RFCOMMChannel->ConfigFlags & (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS)) == - (RFCOMM_CONFIG_REMOTESIGNALS | RFCOMM_CONFIG_LOCALSIGNALS)) - { - RFCOMMChannel->State = RFCOMM_Channel_Open; - RFCOMM_ChannelOpened(RFCOMMChannel); - } - } - } -} - -/** Processes an incoming RFCOMM packet on an ACL channel which has been previously opened between the local and - * a remote device to handle RFCOMM traffic. - * - * \param[in] Data Incoming packet data containing the RFCOMM packet - * \param[in] ACLChannel ACL channel the request was issued to by the remote device - */ -void RFCOMM_ProcessPacket(void* Data, - Bluetooth_Channel_t* const ACLChannel) -{ - const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data; - const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t); - uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData); - - /* Decode the RFCOMM frame type from the header */ - switch (FrameHeader->Control & ~FRAME_POLL_FINAL) - { - case RFCOMM_Frame_DM: - RFCOMM_ProcessDM(&FrameHeader->Address, ACLChannel); - break; - case RFCOMM_Frame_DISC: - RFCOMM_ProcessDISC(&FrameHeader->Address, ACLChannel); - break; - case RFCOMM_Frame_SABM: - RFCOMM_ProcessSABM(&FrameHeader->Address, ACLChannel); - break; - case RFCOMM_Frame_UA: - RFCOMM_ProcessUA(&FrameHeader->Address, ACLChannel); - break; - case RFCOMM_Frame_UIH: - RFCOMM_ProcessUIH(&FrameHeader->Address, FrameDataLen, FrameData, ACLChannel); - break; - default: - BT_RFCOMM_DEBUG(1, "<< Unknown Frame Received"); - break; - } -} - -/** Sends an RFCOMM notification to the remote device that the local terminal control signals (located in the - * "Local" structure of the RFCOMM channel) have changed, pushing the new signals to the remote device. - * - * \param[in] RFCOMMChannel RFCOMM logical channel whose local terminal signals have changed - * \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices - */ -void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, ">> MSC Command"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI); - - struct - { - RFCOMM_Command_t CommandHeader; - uint8_t Length; - RFCOMM_MSC_Parameters_t Params; - } MSCommand; - - MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true}; - MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01; - MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true}; - MSCommand.Params.Signals = RFCOMMChannel->Local.Signals; - MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal; - - /* Send the MSC command to the remote device */ - RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel); -} - -/** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a - * RFCOMM channel once it has been opened. - * - * \param[in] DataLen Length of the RFCOMM data to send, in bytes - * \param[in] Data Pointer to a buffer where the data to send is located - * \param[in] RFCOMMChannel RFCOMM logical channel which is to be transmitted to - * \param[in] ACLChannel ACL channel which has been opened to carry RFCOMM traffic between devices - */ -void RFCOMM_SendData(const uint16_t DataLen, - const uint8_t* Data, - const RFCOMM_Channel_t* const RFCOMMChannel, - Bluetooth_Channel_t* const ACLChannel) -{ - if (RFCOMMChannel->State != RFCOMM_Channel_Open) - return; - - BT_RFCOMM_DEBUG(1, ">> UIH Frame"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI); - - /* Send the MSC command to the remote device */ - RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel); -} - -RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI) -{ - /* Find a free entry in the RFCOMM channel multiplexer state array */ - for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) - { - RFCOMM_Channel_t* RFCOMMChannel = &RFCOMM_Channels[i]; - - /* If the channel's state is closed, the channel state entry is free */ - if (RFCOMMChannel->State == RFCOMM_Channel_Closed) - { - RFCOMMChannel->DLCI = DLCI; - RFCOMMChannel->State = RFCOMM_Channel_Configure; - RFCOMMChannel->Priority = 7 + (RFCOMMChannel->DLCI & 0xF8); - RFCOMMChannel->MTU = 0xFFFF; - RFCOMMChannel->Remote.Signals = 0 | (1 << 0); - RFCOMMChannel->Remote.BreakSignal = 0 | (1 << 0); - RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0); - RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0); - RFCOMMChannel->ConfigFlags = 0; - - return RFCOMMChannel; - } - } - - return NULL; -} - -RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI) -{ - /* Search through the RFCOMM channel list, looking for the specified channel */ - for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) - { - RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i]; - - /* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */ - if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI)) - return CurrRFCOMMChannel; - } - - /* Channel not found in the channel state table, return failure */ - return NULL; -} - -uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos) -{ - uint8_t FirstOctet; - uint8_t SecondOctet = 0; - - FirstOctet = **BufferPos; - (*BufferPos)++; - - /* If the field size is more than a single byte, fetch the next byte in the variable length field */ - if (!(FirstOctet & 0x01)) - { - SecondOctet = **BufferPos; - (*BufferPos)++; - - /* Discard any remaining bytes in the variable length field that won't fit in the return value */ - while (!(**BufferPos & 0x01)) - (*BufferPos)++; - } - - /* Bit-shift the bytes that comprise the variable length field so that they form a single integer */ - return (((uint16_t)SecondOctet << 7) | FirstOctet >> 1); -} - -void RFCOMM_SendFrame(const uint8_t DLCI, - const bool CommandResponse, - const uint8_t Control, - const uint16_t DataLen, - const void* Data, - Bluetooth_Channel_t* const ACLChannel) -{ - struct - { - RFCOMM_Header_t FrameHeader; - uint8_t Size[(DataLen < 128) ? 1 : 2]; - uint8_t Data[DataLen]; - uint8_t FCS; - } ResponsePacket; - - /* Set the frame header values to the specified address and frame type */ - ResponsePacket.FrameHeader.Control = Control; - ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse}; - - /* Set the lower 7 bits of the packet length */ - ResponsePacket.Size[0] = (DataLen << 1); - - /* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */ - if (DataLen < 128) - ResponsePacket.Size[0] |= 0x01; - else - ResponsePacket.Size[1] = (DataLen >> 7); - - /* Copy over the packet data from the source buffer to the response packet buffer */ - memcpy(ResponsePacket.Data, Data, DataLen); - - /* Determine the length of the frame which is to be used to calculate the CRC value */ - uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader); - - /* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */ - if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH) - CRCLength += sizeof(ResponsePacket.Size); - - /* Calculate the frame checksum from the appropriate fields */ - ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength); - - /* Send the completed response packet to the sender */ - Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), ACLChannel); -} - -static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, - uint8_t Length) -{ - uint8_t FCS = 0xFF; - - /* Calculate new Frame CRC value via the given data bytes and the CRC table */ - for (uint8_t i = 0; i < Length; i++) - FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]); - - return ~FCS; -} - -static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< DM Received"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); -} - -static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< DISC Received"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); - - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - - /* If the requested channel is currently open, destroy it */ - if (RFCOMMChannel != NULL) - RFCOMMChannel->State = RFCOMM_Channel_Closed; - - BT_RFCOMM_DEBUG(1, ">> UA Sent"); - RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel); -} - -static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< SABM Received"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); - - if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI) - { - BT_RFCOMM_DEBUG(1, ">> UA Sent"); - - /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */ - RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel); - - return; - } - - /* Find the existing channel's entry in the channel table */ - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - - /* Existing entry not found, create a new entry for the channel */ - if (RFCOMMChannel == NULL) - RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI); - - /* If space was found in the channel table for the new channel, ACK the request */ - if (RFCOMMChannel != NULL) - { - BT_RFCOMM_DEBUG(1, ">> UA Sent"); - - /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */ - RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel); - } - else - { - BT_RFCOMM_DEBUG(1, ">> DM Sent"); - - /* No free channel in the multiplexer - decline the SABM by sending a DM frame */ - RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_DM | FRAME_POLL_FINAL), 0, NULL, ACLChannel); - } -} - -static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< UA Received"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); -} - -static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress, - const uint16_t FrameLength, - const uint8_t* FrameData, - Bluetooth_Channel_t* const ACLChannel) -{ - if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI) - { - RFCOMM_ProcessControlCommand(FrameData, ACLChannel); - return; - } - - BT_RFCOMM_DEBUG(1, "<< UIH Received"); - BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); - BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength); - - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - - if (RFCOMMChannel != NULL) - RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h deleted file mode 100644 index 639873ea9..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for RFCOMM.c. - */ - -#ifndef _RFCOMM_H_ -#define _RFCOMM_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - - #include - #include - - #include "BluetoothStack.h" - #include "RFCOMMControl.h" - - /* Macros: */ - #define BT_RFCOMM_DEBUG(l, s, ...) do { if (RFCOMM_DEBUG_LEVEL >= l) printf_P(PSTR("(RFCOMM) " s "\r\n"), ##__VA_ARGS__); } while (0) - #define RFCOMM_DEBUG_LEVEL 0 - - #define FRAME_POLL_FINAL (1 << 4) - - #define RFCOMM_CONTROL_DLCI 0 - #define RFCOMM_MAX_OPEN_CHANNELS 5 - - /* Enums: */ - /** Enum for the types of RFCOMM frames which can be exchanged on a Bluetooth channel. */ - enum RFCOMM_Frame_Types_t - { - RFCOMM_Frame_DM = 0x0F, /**< Disconnected Mode Field */ - RFCOMM_Frame_DISC = 0x43, /**< Disconnect Field */ - RFCOMM_Frame_SABM = 0x2F, /**< Set Asynchronous Balance Mode Field */ - RFCOMM_Frame_UA = 0x63, /**< Unnumbered Acknowledgement Field */ - RFCOMM_Frame_UIH = 0xEF, /**< Unnumbered Information with Header check Field */ - }; - - enum RFCOMM_Channel_States_t - { - RFCOMM_Channel_Closed = 0, - RFCOMM_Channel_Configure = 1, - RFCOMM_Channel_Open = 2, - }; - - /* Type Defines: */ - typedef struct - { - uint8_t DLCI; - uint8_t State; - uint8_t Priority; - uint16_t MTU; - uint8_t ConfigFlags; - struct - { - uint8_t Signals; - uint8_t BreakSignal; - } Remote; - struct - { - uint8_t Signals; - uint8_t BreakSignal; - } Local; - } RFCOMM_Channel_t; - - /* External Variables: */ - extern RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS]; - - /* Function Prototypes: */ - void RFCOMM_Initialize(void); - void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel); - void RFCOMM_ProcessPacket(void* Data, - Bluetooth_Channel_t* const ACLChannel); - - void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel, - Bluetooth_Channel_t* const ACLChannel); - void RFCOMM_SendData(const uint16_t DataLen, - const uint8_t* Data, - const RFCOMM_Channel_t* const RFCOMMChannel, - Bluetooth_Channel_t* const ACLChannel); - - void RFCOMM_ChannelOpened(RFCOMM_Channel_t* const RFCOMMChannel); - void RFCOMM_DataReceived(RFCOMM_Channel_t* const RFCOMMChannel, - uint16_t DataLen, - const uint8_t* Data); - void RFCOMM_ChannelSignalsReceived(RFCOMM_Channel_t* const RFCOMMChannel); - - RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI); - RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI); - uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos); - void RFCOMM_SendFrame(const uint8_t DLCI, - const bool CommandResponse, - const uint8_t Control, - const uint16_t DataLen, - const void* Data, - Bluetooth_Channel_t* const ACLChannel); - - #if defined(INCLUDE_FROM_RFCOMM_C) - static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, - uint8_t Length); - - static void RFCOMM_ProcessDM(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress, - const uint16_t FrameLength, - const uint8_t* FrameData, - Bluetooth_Channel_t* const ACLChannel); - #endif - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c deleted file mode 100644 index 890154468..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * RFCOMM multiplexer control layer module. This module handles multiplexer - * channel commands to the control DLCI in the RFCOMM layer, to open, configure, - * test and close logical RFCOMM channels. - */ - -#define INCLUDE_FROM_RFCOMM_CONTROL_C -#include "RFCOMMControl.h" - -void RFCOMM_ProcessControlCommand(const uint8_t* Command, - Bluetooth_Channel_t* const ACLChannel) -{ - const RFCOMM_Command_t* CommandHeader = (const RFCOMM_Command_t*)Command; - const uint8_t* CommandData = (const uint8_t*)Command + sizeof(RFCOMM_Command_t); - uint8_t CommandDataLen = RFCOMM_GetVariableFieldValue(&CommandData); - - switch (CommandHeader->Command) - { - case RFCOMM_Control_Test: - RFCOMM_ProcessTestCommand(CommandHeader, CommandDataLen, CommandData, ACLChannel); - break; - case RFCOMM_Control_FlowControlEnable: - RFCOMM_ProcessFCECommand(CommandHeader, CommandData, ACLChannel); - break; - case RFCOMM_Control_FlowControlDisable: - RFCOMM_ProcessFCDCommand(CommandHeader, CommandData, ACLChannel); - break; - case RFCOMM_Control_ModemStatus: - RFCOMM_ProcessMSCCommand(CommandHeader, CommandDataLen, CommandData, ACLChannel); - break; - case RFCOMM_Control_RemotePortNegotiation: - RFCOMM_ProcessRPNCommand(CommandHeader, CommandData, ACLChannel); - break; - case RFCOMM_Control_RemoteLineStatus: - RFCOMM_ProcessRLSCommand(CommandHeader, CommandData, ACLChannel); - break; - case RFCOMM_Control_DLCParameterNegotiation: - RFCOMM_ProcessDPNCommand(CommandHeader, CommandData, ACLChannel); - break; - default: - BT_RFCOMM_DEBUG(1, "<< Unknown Command"); - break; - } -} - -static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t CommandDataLen, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - const uint8_t* Params = (const uint8_t*)CommandData; - - BT_RFCOMM_DEBUG(1, "<< TEST Command"); - - struct - { - RFCOMM_Command_t CommandHeader; - uint8_t Length; - uint8_t TestData[CommandDataLen]; - } TestResponse; - - /* Fill out the Test response data */ - TestResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_Test, .EA = true, .CR = false}; - TestResponse.Length = (CommandDataLen << 1) | 0x01; - memcpy(TestResponse.TestData, Params, CommandDataLen); - - BT_RFCOMM_DEBUG(1, ">> TEST Response"); - - /* Send the PDN response to acknowledge the command */ - RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, sizeof(TestResponse), &TestResponse, ACLChannel); -} - -static void RFCOMM_ProcessFCECommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< FCE Command"); -} - -static void RFCOMM_ProcessFCDCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< FCD Command"); -} - -static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t CommandDataLen, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - const RFCOMM_MSC_Parameters_t* Params = (const RFCOMM_MSC_Parameters_t*)CommandData; - - BT_RFCOMM_DEBUG(1, "<< MSC %s", (CommandHeader->CR) ? "Command" : "Response"); - BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->Channel.DLCI); - - /* Ignore status flags sent to the control channel */ - if (Params->Channel.DLCI == RFCOMM_CONTROL_DLCI) - return; - - /* Retrieve existing channel configuration data, if already opened */ - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->Channel.DLCI); - - /* If the channel does not exist, abort */ - if (RFCOMMChannel == NULL) - return; - - /* Check if the MSC packet is a command or a response */ - if (CommandHeader->CR) - { - /* Save the new channel signals to the channel state structure */ - RFCOMMChannel->Remote.Signals = Params->Signals; - RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_REMOTESIGNALS; - - /* If the command contains the optional break signals field, store the value */ - if (CommandDataLen == sizeof(RFCOMM_MSC_Parameters_t)) - RFCOMMChannel->Remote.BreakSignal = Params->BreakSignal; - - /* Notify the user application that the signals have been received */ - RFCOMM_ChannelSignalsReceived(RFCOMMChannel); - - struct - { - RFCOMM_Command_t CommandHeader; - uint8_t Length; - RFCOMM_MSC_Parameters_t Params; - } MSResponse; - - /* Fill out the MS response data */ - MSResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = false}; - MSResponse.Length = (CommandDataLen << 1) | 0x01; - memcpy(&MSResponse.Params, Params, sizeof(RFCOMM_MSC_Parameters_t)); - - BT_RFCOMM_DEBUG(1, ">> MSC Response"); - - /* Send the MSC response to acknowledge the command */ - RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, - (sizeof(MSResponse) - sizeof(MSResponse.Params) + CommandDataLen), &MSResponse, ACLChannel); - } - else - { - /* Indicate that the remote device has acknowledged the sent signals */ - RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALS; - } -} - -static void RFCOMM_ProcessRPNCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< RPN Command"); -} - -static void RFCOMM_ProcessRLSCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - BT_RFCOMM_DEBUG(1, "<< RLS Command"); -} - -static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel) -{ - const RFCOMM_DPN_Parameters_t* Params = (const RFCOMM_DPN_Parameters_t*)CommandData; - - BT_RFCOMM_DEBUG(1, "<< DPN Command"); - BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->DLCI); - - /* Ignore parameter negotiations to the control channel */ - if (Params->DLCI == RFCOMM_CONTROL_DLCI) - return; - - /* Retrieve existing channel configuration data, if already opened */ - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->DLCI); - - /* Check if the channel has no corresponding entry - remote did not open it first */ - if (RFCOMMChannel == NULL) - { - /* Create a new entry in the channel table for the new channel */ - RFCOMMChannel = RFCOMM_GetFreeChannelEntry(Params->DLCI); - - /* No free entry was found, discard the request */ - if (RFCOMMChannel == NULL) - { - BT_RFCOMM_DEBUG(2, "-- No Free Channel"); - return; - } - } - - /* Save the new channel configuration */ - RFCOMMChannel->State = RFCOMM_Channel_Configure; - RFCOMMChannel->Priority = Params->Priority; - RFCOMMChannel->MTU = Params->MaximumFrameSize; - - struct - { - RFCOMM_Command_t CommandHeader; - uint8_t Length; - RFCOMM_DPN_Parameters_t Params; - } DPNResponse; - - /* Fill out the DPN response data */ - DPNResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_DLCParameterNegotiation, .EA = true, .CR = false}; - DPNResponse.Length = (sizeof(DPNResponse.Params) << 1) | 0x01; - memcpy(&DPNResponse.Params, Params, sizeof(RFCOMM_DPN_Parameters_t)); - DPNResponse.Params.ConvergenceLayer = 0x00; // TODO: Enable credit based transaction support - - BT_RFCOMM_DEBUG(1, ">> DPN Response"); - - /* Send the DPN response to acknowledge the command */ - RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, sizeof(DPNResponse), &DPNResponse, ACLChannel); -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h deleted file mode 100644 index 9e3c38b63..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for RFCOMMControl.c. - */ - -#ifndef _RFCOMM_CONTROL_H_ -#define _RFCOMM_CONTROL_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - - #include - #include - - #include "BluetoothStack.h" - #include "RFCOMM.h" - - /* Macros: */ - #define RFCOMM_SIGNAL_FC (1 << 1) - #define RFCOMM_SIGNAL_RTC (1 << 2) - #define RFCOMM_SIGNAL_RTR (1 << 3) - #define RFCOMM_SIGNAL_IC (1 << 6) - #define RFCOMM_SIGNAL_DV (1 << 7) - - #define RFCOMM_CONFIG_REMOTESIGNALS (1 << 0) - #define RFCOMM_CONFIG_LOCALSIGNALS (1 << 1) - #define RFCOMM_CONFIG_LOCALSIGNALSSENT (1 << 2) - #define RFCOMM_CONFIG_ABMMODESET (1 << 3) - - /* Enums: */ - enum RFCOMM_Control_Commands_t - { - RFCOMM_Control_Test = (0x20 >> 2), - RFCOMM_Control_FlowControlEnable = (0xA0 >> 2), - RFCOMM_Control_FlowControlDisable = (0x60 >> 2), - RFCOMM_Control_ModemStatus = (0xE0 >> 2), - RFCOMM_Control_RemotePortNegotiation = (0x90 >> 2), - RFCOMM_Control_RemoteLineStatus = (0x50 >> 2), - RFCOMM_Control_DLCParameterNegotiation = (0x80 >> 2), - RFCOMM_Control_NonSupportedCommand = (0x10 >> 2), - }; - - /* Type Defines: */ - typedef struct - { - unsigned EA : 1; - unsigned CR : 1; - unsigned DLCI : 6; - } RFCOMM_Address_t; - - typedef struct - { - RFCOMM_Address_t Address; - uint8_t Control; - } RFCOMM_Header_t; - - typedef struct - { - unsigned EA : 1; - unsigned CR : 1; - unsigned Command : 6; - } RFCOMM_Command_t; - - typedef struct - { - uint8_t DLCI; - unsigned FrameType : 4; - unsigned ConvergenceLayer : 4; - uint8_t Priority; - uint8_t ACKTimerTicks; - uint16_t MaximumFrameSize; - uint8_t MaxRetransmissions; - uint8_t RecoveryWindowSize; - } RFCOMM_DPN_Parameters_t; - - typedef struct - { - RFCOMM_Address_t Channel; - uint8_t Signals; - uint8_t BreakSignal; - } RFCOMM_MSC_Parameters_t; - - /* Function Prototypes: */ - void RFCOMM_ProcessControlCommand(const uint8_t* Command, - Bluetooth_Channel_t* const Channel); - - #if defined(INCLUDE_FROM_RFCOMM_CONTROL_C) - static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t CommandDataLen, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessFCECommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessFCDCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t CommandDataLen, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessRPNCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessRLSCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t* CommandData, - Bluetooth_Channel_t* const ACLChannel); - #endif - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c deleted file mode 100644 index 94979de66..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c +++ /dev/null @@ -1,716 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SDP layer module. This module implements a simple Service Discovery - * Protocol server, which can broadcast the device's supported services - * to other Bluetooth devices upon request, so that they can determine - * what services are available. - */ - -/* - TODO: Honor remote device's buffer size constraints via continuation state - */ - -#define INCLUDE_FROM_SERVICEDISCOVERYPROTOCOL_C -#include "SDP.h" - -/** Service attribute table list, containing a pointer to each service attribute table the device contains */ -const ServiceAttributeTable_t* SDP_Services_Table[] PROGMEM = - { - SerialPort_Attribute_Table, - }; - -/** Base UUID value common to all standardized Bluetooth services */ -const UUID_t BaseUUID PROGMEM = {0x00000000, BASE_80BIT_UUID}; - -/** Main Service Discovery Protocol packet processing routine. This function processes incoming SDP packets from - * a connected Bluetooth device, and sends back appropriate responses to allow other devices to determine the - * services the local device exposes. - * - * \param[in] Data Incoming packet data containing the SDP request - * \param[in] Channel ACL channel the request was issued to by the remote device - */ -void SDP_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel) -{ - SDP_PDUHeader_t* SDPHeader = (SDP_PDUHeader_t*)Data; - SDPHeader->ParameterLength = SwapEndian_16(SDPHeader->ParameterLength); - - BT_SDP_DEBUG(1, "SDP Packet Received"); - BT_SDP_DEBUG(2, "-- PDU ID: 0x%02X", SDPHeader->PDU); - BT_SDP_DEBUG(2, "-- Param Length: 0x%04X", SDPHeader->ParameterLength); - - /* Dispatch to the correct processing routine for the given SDP packet type */ - switch (SDPHeader->PDU) - { - case SDP_PDU_SERVICESEARCHREQUEST: - SDP_ProcessServiceSearch(SDPHeader, Channel); - break; - case SDP_PDU_SERVICEATTRIBUTEREQUEST: - SDP_ProcessServiceAttribute(SDPHeader, Channel); - break; - case SDP_PDU_SERVICESEARCHATTRIBUTEREQUEST: - SDP_ProcessServiceSearchAttribute(SDPHeader, Channel); - break; - } -} - -/** Internal processing routine for SDP Service Search Requests. - * - * \param[in] SDPHeader Pointer to the start of the issued SDP request - * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to - */ -static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel) -{ - const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t)); - - BT_SDP_DEBUG(1, "<< Service Search"); - - /* Retrieve the list of search UUIDs from the request */ - uint8_t UUIDList[12][UUID_SIZE_BYTES]; - uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); - BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - - /* Retrieve the maximum service record response count from the request */ - uint16_t MaxServiceRecordCount = SDP_ReadData16(&CurrentParameter); - BT_SDP_DEBUG(2, "-- Max Return Service Count: 0x%04X", MaxServiceRecordCount); - - struct - { - SDP_PDUHeader_t SDPHeader; - uint16_t TotalServiceRecordCount; - uint16_t CurrentServiceRecordCount; - uint8_t ResponseData[100]; - } ResponsePacket; - - uint8_t AddedServiceHandles = 0; - - /* Create a pointer to the buffer to indicate the current location for response data to be added */ - void* CurrResponsePos = ResponsePacket.ResponseData; - - /* Search through the global service list an item at a time */ - for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++) - { - /* Read in a pointer to the current UUID table entry's Attribute table */ - ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]); - - if (!(SDP_SearchServiceTable(UUIDList, TotalUUIDs, CurrAttributeTable))) - continue; - - BT_SDP_DEBUG(2, " -- Found search match in table"); - - /* Retrieve a PROGMEM pointer to the value of the service's record handle */ - const void* AttributeValue = SDP_GetAttributeValue(CurrAttributeTable, SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE); - - /* Copy over the service record handle to the response list */ - uint8_t AttrHeaderSize; - uint8_t AttrSize = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttrHeaderSize); - memcpy_P(CurrResponsePos, AttributeValue + AttrHeaderSize, AttrSize); - CurrResponsePos += AttrHeaderSize + AttrSize; - - AddedServiceHandles++; - } - - /* Continuation state - always zero */ - SDP_WriteData8(&CurrResponsePos, 0); - - /* Fill out the service record count values in the returned packet */ - ResponsePacket.TotalServiceRecordCount = SwapEndian_16(AddedServiceHandles); - ResponsePacket.CurrentServiceRecordCount = ResponsePacket.TotalServiceRecordCount; - - /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created service - handle list and the SDP continuation state */ - uint16_t ParamLength = (ResponsePacket.CurrentServiceRecordCount << 2) + - sizeof(ResponsePacket.CurrentServiceRecordCount) + - sizeof(ResponsePacket.TotalServiceRecordCount) + - sizeof(uint8_t); - - /* Fill in the response packet's header */ - ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICESEARCHRESPONSE; - ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID; - ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength); - - BT_SDP_DEBUG(1, ">> Service Search Response"); - - /* Send the completed response packet to the sender */ - Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel); -} - -/** Internal processing routine for SDP Service Attribute Requests. - * - * \param[in] SDPHeader Pointer to the start of the issued SDP request - * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to - */ -static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel) -{ - const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t)); - - BT_SDP_DEBUG(1, "<< Service Attribute"); - - /* Retrieve the service handle whose attributes are to be examined */ - uint32_t ServiceHandle = SDP_ReadData32(&CurrentParameter); - BT_SDP_DEBUG(2, "-- Service Handle: 0x%08lX", ServiceHandle); - - /* Retrieve the maximum Attribute response size from the request */ - uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); - BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); - - /* Retrieve the list of Attributes from the request */ - uint16_t AttributeList[8][2]; - uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter); - BT_SDP_DEBUG(2, "-- Total Attributes: %d", TotalAttributes); - - struct - { - SDP_PDUHeader_t SDPHeader; - uint16_t AttributeListByteCount; - uint8_t ResponseData[100]; - } ResponsePacket; - - /* Create a pointer to the buffer to indicate the current location for response data to be added */ - void* CurrResponsePos = ResponsePacket.ResponseData; - - /* Clamp the maximum attribute size to the size of the allocated buffer */ - if (MaxAttributeSize > sizeof(ResponsePacket.ResponseData)) - MaxAttributeSize = sizeof(ResponsePacket.ResponseData); - - uint16_t TotalResponseSize = 0; - - /* Search through the global UUID list an item at a time */ - for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++) - { - /* Read in a pointer to the current UUID table entry's Attribute table */ - ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]); - - /* Retrieve a PROGMEM pointer to the value of the Service Record Handle */ - const void* ServiceRecord = SDP_GetAttributeValue(CurrAttributeTable, SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE); - - /* Get the size of the header for the Service Record Handle */ - uint8_t AttrHeaderSize; - SDP_GetLocalAttributeContainerSize(ServiceRecord, &AttrHeaderSize); - - /* Retrieve the endian-swapped service handle of the current service being examined */ - uint32_t CurrServiceHandle = SwapEndian_32(pgm_read_dword(ServiceRecord + AttrHeaderSize)); - - /* Check if the current service in the service table has the requested service handle */ - if (ServiceHandle == CurrServiceHandle) - { - /* Add the listed attributes for the found UUID to the response */ - TotalResponseSize = SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes, - &CurrResponsePos); - - /* Requested service found, abort the search through the service table */ - break; - } - } - - /* Continuation state - always zero */ - SDP_WriteData8(&CurrResponsePos, 0); - - /* Set the total response list size to the size of the outer container plus its header size and continuation state */ - ResponsePacket.AttributeListByteCount = SwapEndian_16(TotalResponseSize); - - /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute - value list and the SDP continuation state */ - uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + TotalResponseSize + sizeof(uint8_t)); - - /* Fill in the response packet's header */ - ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICEATTRIBUTERESPONSE; - ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID; - ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength); - - BT_SDP_DEBUG(1, ">> Service Attribute Response"); - BT_SDP_DEBUG(2, "-- Param Len 0x%04X", ParamLength); - - /* Send the completed response packet to the sender */ - Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel); -} - -/** Internal processing routine for SDP Service Search Attribute Requests. - * - * \param[in] SDPHeader Pointer to the start of the issued SDP request - * \param[in] Channel Pointer to the Bluetooth channel structure the request was issued to - */ -static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel) -{ - const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t)); - - BT_SDP_DEBUG(1, "<< Service Search Attribute"); - - /* Retrieve the list of search UUIDs from the request */ - uint8_t UUIDList[12][UUID_SIZE_BYTES]; - uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); - BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - - /* Retrieve the maximum Attribute response size from the request */ - uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); - BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); - - /* Retrieve the list of Attributes from the request */ - uint16_t AttributeList[8][2]; - uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter); - BT_SDP_DEBUG(2, "-- Total Attributes: %d", TotalAttributes); - - struct - { - SDP_PDUHeader_t SDPHeader; - uint16_t AttributeListByteCount; - uint8_t ResponseData[100]; - } ResponsePacket; - - /* Create a pointer to the buffer to indicate the current location for response data to be added */ - void* CurrResponsePos = ResponsePacket.ResponseData; - - /* Clamp the maximum attribute size to the size of the allocated buffer */ - if (MaxAttributeSize > sizeof(ResponsePacket.ResponseData)) - MaxAttributeSize = sizeof(ResponsePacket.ResponseData); - - /* Add the outer Data Element Sequence header for all of the retrieved Attributes */ - uint16_t* TotalResponseSize = SDP_AddSequence16(&CurrResponsePos); - - /* Search through the global service list an item at a time */ - for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++) - { - /* Read in a pointer to the current UUID table entry's Attribute table */ - ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]); - - if (!(SDP_SearchServiceTable(UUIDList, TotalUUIDs, CurrAttributeTable))) - continue; - - BT_SDP_DEBUG(2, " -- Found search match in table"); - - /* Add the listed attributes for the found UUID to the response */ - *TotalResponseSize += SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes, - &CurrResponsePos); - } - - /* Continuation state - always zero */ - SDP_WriteData8(&CurrResponsePos, 0); - - /* Set the total response list size to the size of the outer container plus its header size and continuation state */ - ResponsePacket.AttributeListByteCount = SwapEndian_16(3 + *TotalResponseSize); - - /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute - value list and the SDP continuation state */ - uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + - (3 + *TotalResponseSize) + - sizeof(uint8_t)); - - /* Flip the endianness of the container's size */ - *TotalResponseSize = SwapEndian_16(*TotalResponseSize); - - /* Fill in the response packet's header */ - ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICESEARCHATTRIBUTERESPONSE; - ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID; - ResponsePacket.SDPHeader.ParameterLength = SwapEndian_16(ParamLength); - - BT_SDP_DEBUG(1, ">> Service Search Attribute Response"); - BT_SDP_DEBUG(2, "-- Param Len 0x%04X", ParamLength); - - /* Send the completed response packet to the sender */ - Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket.SDPHeader) + ParamLength), Channel); -} - -/** Adds all the Attributes in the given service table to the response that appear in the Attribute table. - * - * \param[in] AttributeTable Pointer to an Attribute table for the service to examine - * \param[in] AttributeList Pointer to a list of Attribute ranges - * \param[in] TotalAttributes Number of Attributes stored in the Attribute list - * \param[out] BufferPos Pointer to the output buffer position where the retrieved attributes are to be stored - * - * \return Number of bytes added to the output buffer - */ -static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* AttributeTable, - uint16_t AttributeList[][2], - const uint8_t TotalAttributes, - void** const BufferPos) -{ - uint16_t TotalResponseSize; - - /* Add an inner Data Element Sequence header for the current services's found Attributes */ - uint16_t* AttributeListSize = SDP_AddSequence16(BufferPos); - - /* Search through the list of Attributes one at a time looking for values in the current UUID's Attribute table */ - for (uint8_t CurrAttribute = 0; CurrAttribute < TotalAttributes; CurrAttribute++) - { - uint16_t* AttributeIDRange = AttributeList[CurrAttribute]; - void* AttributeValue; - - /* Look through the current service's attribute list, examining all the attributes */ - while ((AttributeValue = pgm_read_ptr(&AttributeTable->Data)) != NULL) - { - /* Get the current Attribute's ID from the current attribute table entry */ - uint16_t CurrAttributeID = pgm_read_word(&AttributeTable->AttributeID); - - /* Check if the current Attribute's ID is within the current Attribute range */ - if ((CurrAttributeID >= AttributeIDRange[0]) && (CurrAttributeID <= AttributeIDRange[1])) - { - /* Increment the current UUID's returned Attribute container size by the number of added bytes */ - *AttributeListSize += SDP_AddAttributeToResponse(CurrAttributeID, AttributeValue, BufferPos); - } - - AttributeTable++; - } - } - - /* Record the total number of added bytes to the buffer */ - TotalResponseSize = 3 + *AttributeListSize; - - /* Fix endianness of the added attribute data element sequence */ - *AttributeListSize = SwapEndian_16(*AttributeListSize); - - return TotalResponseSize; -} - -/** Adds the given attribute ID and value to the response buffer, and advances the response buffer pointer past the added data. - * - * \param[in] AttributeID Attribute ID to add to the response buffer - * \param[in] AttributeValue Pointer to the start of the Attribute's value, located in PROGMEM - * \param[in, out] ResponseBuffer Pointer to a buffer where the Attribute and Attribute Value is to be added - * - * \return Number of bytes added to the response buffer - */ -static uint16_t SDP_AddAttributeToResponse(const uint16_t AttributeID, - const void* AttributeValue, - void** ResponseBuffer) -{ - /* Retrieve the size of the attribute value from its container header */ - uint8_t AttributeHeaderLength; - uint16_t AttributeValueLength = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttributeHeaderLength); - - BT_SDP_DEBUG(2, " -- Add Attribute (0x%04X) 0x%04X", (AttributeHeaderLength + AttributeValueLength), AttributeID); - - /* Add a Data Element header to the response for the Attribute ID */ - SDP_WriteData8(ResponseBuffer, (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit)); - - /* Add the Attribute ID to the created Data Element */ - SDP_WriteData16(ResponseBuffer, AttributeID); - - /* Copy over the Attribute value Data Element container to the response */ - memcpy_P(*ResponseBuffer, AttributeValue, AttributeHeaderLength + AttributeValueLength); - *ResponseBuffer += AttributeHeaderLength + AttributeValueLength; - - return (sizeof(uint8_t) + sizeof(uint16_t) + AttributeHeaderLength + AttributeValueLength); -} - -/** Retrieves a pointer to the value of the given Attribute ID from the given Attribute table. - * - * \param[in] AttributeTable Pointer to the Attribute table to search in - * \param[in] AttributeID Attribute ID to search for within the table - * - * \return Pointer to the start of the Attribute's value if found within the table, NULL otherwise - */ -static void* SDP_GetAttributeValue(const ServiceAttributeTable_t* AttributeTable, - const uint16_t AttributeID) -{ - void* CurrTableItemData; - - /* Search through the current Attribute table, abort when the terminator item has been reached */ - while ((CurrTableItemData = pgm_read_ptr(&AttributeTable->Data)) != NULL) - { - /* Check if the current Attribute ID matches the search ID - if so return a pointer to it */ - if (pgm_read_word(&AttributeTable->AttributeID) == AttributeID) - return CurrTableItemData; - - AttributeTable++; - } - - return NULL; -} - -/** Retrieves the Attribute table for the given UUID list if it exists. - * - * \param[in] UUIDList List of UUIDs which must be matched within the service attribute table - * \param[in] TotalUUIDs Total number of UUIDs stored in the UUID list - * \param[in] CurrAttributeTable Pointer to the service attribute table to search through - * - * \return True if all the UUIDs given in the UUID list appear in the given attribute table, false otherwise - */ -static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES], - const uint8_t TotalUUIDs, - const ServiceAttributeTable_t* CurrAttributeTable) -{ - const void* CurrAttribute; - uint16_t UUIDMatchFlags = 0; - - /* Search through the current attribute table, checking each attribute value for UUID matches */ - while ((CurrAttribute = pgm_read_ptr(&CurrAttributeTable->Data)) != NULL) - { - SDP_CheckUUIDMatch(UUIDList, TotalUUIDs, &UUIDMatchFlags, CurrAttribute); - CurrAttributeTable++; - } - - /* Determine how many UUID matches in the list we have found */ - uint8_t UUIDMatches; - for (UUIDMatches = 0; UUIDMatchFlags; UUIDMatches++) - UUIDMatchFlags &= (UUIDMatchFlags - 1); - - /* If all UUIDs have been matched to the current service, return true */ - return (UUIDMatches == TotalUUIDs); -} - -/** Recursively unwraps the given locally stored attribute (in PROGMEM space), searching for UUIDs to match against - * the given UUID list. As matches are found, they are indicated in the UUIDMatch flag list. - * - * \param[in] UUIDList List of UUIDs which must be matched within the service attribute table - * \param[in] TotalUUIDs Total number of UUIDs stored in the UUID list - * \param[in, out] UUIDMatchFlags Array of flags indicating which UUIDs in the list have already been matched - * \param[in] CurrAttribute Pointer to the current attribute to search through - * - * \return True if all the UUIDs given in the UUID list appear in the given attribute table, false otherwise - */ -static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], - const uint8_t TotalUUIDs, - uint16_t* const UUIDMatchFlags, - const void* CurrAttribute) -{ - uint8_t CurrAttributeType = (pgm_read_byte(CurrAttribute) & ~0x07); - - /* Check the data type of the current attribute value - if UUID, compare, if Sequence, unwrap and recurse */ - if (CurrAttributeType == SDP_DATATYPE_UUID) - { - uint16_t CurrUUIDMatchMask = (1 << 0); - - /* Look for matches in the UUID list against the current attribute UUID value */ - for (uint8_t i = 0; i < TotalUUIDs; i++) - { - /* Check if the current unmatched UUID is identical to the search UUID */ - if (!(*UUIDMatchFlags & CurrUUIDMatchMask) && !(memcmp_P(UUIDList[i], (CurrAttribute + 1), UUID_SIZE_BYTES))) - { - /* Indicate match found for the current attribute UUID and early-abort */ - *UUIDMatchFlags |= CurrUUIDMatchMask; - break; - } - - CurrUUIDMatchMask <<= 1; - } - } - else if (CurrAttributeType == SDP_DATATYPE_Sequence) - { - uint8_t SequenceHeaderSize; - uint16_t SequenceSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &SequenceHeaderSize); - - CurrAttribute += SequenceHeaderSize; - - /* Recursively unwrap the sequence container, and re-search its contents for UUIDs */ - while (SequenceSize) - { - uint8_t InnerHeaderSize; - uint16_t InnerSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &InnerHeaderSize); - - /* Recursively search of the next element in the sequence, trying to match UUIDs with the UUID list */ - SDP_CheckUUIDMatch(UUIDList, TotalUUIDs, UUIDMatchFlags, CurrAttribute); - - /* Skip to the next element in the sequence */ - SequenceSize -= InnerHeaderSize + InnerSize; - CurrAttribute += InnerHeaderSize + InnerSize; - } - } -} - -/** Reads in the collection of Attribute ranges from the input buffer's Data Element Sequence container, into the given - * Attribute list for later use. Once complete, the input buffer pointer is advanced to the end of the Attribute container. - * - * \param[out] AttributeList Pointer to a buffer where the list of Attribute ranges are to be stored - * \param[in] CurrentParameter Pointer to a Buffer containing a Data Element Sequence of Attribute and Attribute Range elements - * - * \return Total number of Attribute ranges stored in the Data Element Sequence - */ -static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2], - const void** const CurrentParameter) -{ - uint8_t ElementHeaderSize; - uint8_t TotalAttributes = 0; - - /* Retrieve the total size of the Attribute container, and unwrap the outer Data Element Sequence container */ - uint16_t AttributeIDListLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - BT_SDP_DEBUG(2, "-- Total Attribute Length: 0x%04X", AttributeIDListLength); - while (AttributeIDListLength) - { - /* Retrieve the size of the next Attribute in the container and get a pointer to the next free Attribute element in the list */ - uint16_t* CurrentAttributeRange = AttributeList[TotalAttributes++]; - uint8_t AttributeLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - - /* Copy over the starting Attribute ID and (if it the current element is a range) the ending Attribute ID */ - memcpy(&CurrentAttributeRange[0], *CurrentParameter, AttributeLength); - - /* If the element is not an Attribute Range, copy over the starting ID to the ending ID to make a range of 1 */ - if (AttributeLength == 2) - CurrentAttributeRange[1] = CurrentAttributeRange[0]; - - /* Swap the endianness of the attribute range values */ - CurrentAttributeRange[0] = SwapEndian_16(CurrentAttributeRange[0]); - CurrentAttributeRange[1] = SwapEndian_16(CurrentAttributeRange[1]); - - BT_SDP_DEBUG(2, "-- Attribute: 0x%04X-0x%04X", CurrentAttributeRange[0], CurrentAttributeRange[1]); - - AttributeIDListLength -= (AttributeLength + ElementHeaderSize); - *CurrentParameter += AttributeLength; - } - - return TotalAttributes; -} - -/** Reads in the collection of UUIDs from the input buffer's Data Element Sequence container, into the given - * UUID list for later use. Once complete, the input buffer pointer is advanced to the end of the UUID container. - * - * \param[out] UUIDList Pointer to a buffer where the list of UUIDs are to be stored - * \param[in] CurrentParameter Pointer to a Buffer containing a Data Element Sequence of UUID elements - * - * \return Total number of UUIDs stored in the Data Element Sequence - */ -static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES], - const void** const CurrentParameter) -{ - uint8_t ElementHeaderSize; - uint8_t TotalUUIDs = 0; - - /* Retrieve the total size of the UUID container, and unwrap the outer Data Element Sequence container */ - uint16_t ServicePatternLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - BT_SDP_DEBUG(2, "-- Total UUID Length: 0x%04X", ServicePatternLength); - while (ServicePatternLength) - { - /* Retrieve the size of the next UUID in the container and get a pointer to the next free UUID element in the list */ - uint8_t* CurrentUUID = UUIDList[TotalUUIDs++]; - uint8_t UUIDLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - - /* Copy over UUID from the container to the free slot */ - if (UUIDLength <= 4) - { - /* Copy over the base UUID value to the free UUID slot in the list */ - memcpy_P(CurrentUUID, &BaseUUID, sizeof(BaseUUID)); - - /* Copy over short UUID */ - memcpy(CurrentUUID + (4 - UUIDLength), *CurrentParameter, UUIDLength); - } - else - { - /* Copy over full UUID */ - memcpy(CurrentUUID, *CurrentParameter, UUIDLength); - } - - BT_SDP_DEBUG(2, "-- UUID (%d): %02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X", - UUIDLength, - CurrentUUID[0], CurrentUUID[1], CurrentUUID[2], CurrentUUID[3], - CurrentUUID[4], CurrentUUID[5], - CurrentUUID[6], CurrentUUID[7], - CurrentUUID[8], CurrentUUID[9], - CurrentUUID[10], CurrentUUID[11], CurrentUUID[12], CurrentUUID[13], CurrentUUID[14], CurrentUUID[15]); - - ServicePatternLength -= (UUIDLength + ElementHeaderSize); - *CurrentParameter += UUIDLength; - } - - return TotalUUIDs; -} - -/** Retrieves the total size of the given locally stored (in PROGMEM) attribute Data Element container. - * - * \param[in] AttributeData Pointer to the start of the Attribute container, located in PROGMEM - * \param[out] HeaderSize Pointer to a location where the header size of the data element is to be stored - * - * \return Size in bytes of the entire attribute container, including the header - */ -static uint32_t SDP_GetLocalAttributeContainerSize(const void* const AttributeData, - uint8_t* const HeaderSize) -{ - /* Fetch the size of the Data Element structure from the header */ - uint8_t SizeIndex = (pgm_read_byte(AttributeData) & 0x07); - - uint32_t ElementValueSize; - - /* Convert the Data Element size index into a size in bytes */ - switch (SizeIndex) - { - case SDP_DATASIZE_Variable8Bit: - *HeaderSize = (1 + sizeof(uint8_t)); - ElementValueSize = pgm_read_byte(AttributeData + 1); - break; - case SDP_DATASIZE_Variable16Bit: - *HeaderSize = (1 + sizeof(uint16_t)); - ElementValueSize = SwapEndian_16(pgm_read_word(AttributeData + 1)); - break; - case SDP_DATASIZE_Variable32Bit: - *HeaderSize = (1 + sizeof(uint32_t)); - ElementValueSize = SwapEndian_32(pgm_read_dword(AttributeData + 1)); - break; - default: - *HeaderSize = 1; - ElementValueSize = (1 << SizeIndex); - break; - } - - return ElementValueSize; -} - -/** Retrieves the size of a Data Element container from the current input buffer, and advances the input buffer - * pointer to the start of the Data Element's contents. - * - * \param[in, out] DataElementHeader Pointer to the start of a Data Element header - * \param[out] ElementHeaderSize Size in bytes of the header that was skipped - * - * \return Size in bytes of the Data Element container's contents, minus the header - */ -static uint32_t SDP_GetDataElementSize(const void** const DataElementHeader, - uint8_t* const ElementHeaderSize) -{ - /* Fetch the size of the Data Element structure from the header, increment the current buffer pos */ - uint8_t SizeIndex = (SDP_ReadData8(DataElementHeader) & 0x07); - - uint32_t ElementValueSize; - - /* Convert the Data Element size index into a size in bytes */ - switch (SizeIndex) - { - case SDP_DATASIZE_Variable8Bit: - *ElementHeaderSize = (1 + sizeof(uint8_t)); - ElementValueSize = SDP_ReadData8(DataElementHeader); - break; - case SDP_DATASIZE_Variable16Bit: - *ElementHeaderSize = (1 + sizeof(uint16_t)); - ElementValueSize = SDP_ReadData16(DataElementHeader); - break; - case SDP_DATASIZE_Variable32Bit: - *ElementHeaderSize = (1 + sizeof(uint32_t)); - ElementValueSize = SDP_ReadData32(DataElementHeader); - break; - default: - *ElementHeaderSize = 1; - ElementValueSize = (1 << SizeIndex); - break; - } - - return ElementValueSize; -} - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h deleted file mode 100644 index 83e67308c..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h +++ /dev/null @@ -1,250 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for ServiceDiscoveryProtocol.c. - */ - -#ifndef _SERVICEDISCOVERYPROTOCOL_H_ -#define _SERVICEDISCOVERYPROTOCOL_H_ - - /* Includes: */ - #include - #include - #include - #include - #include - - #include - #include - - #include "BluetoothStack.h" - #include "SDPServices.h" - - /* Macros: */ - #define BT_SDP_DEBUG(l, s, ...) do { if (SDP_DEBUG_LEVEL >= l) printf_P(PSTR("(SDP) " s "\r\n"), ##__VA_ARGS__); } while (0) - #define SDP_DEBUG_LEVEL 0 - - #define SDP_PDU_ERRORRESPONSE 0x01 - #define SDP_PDU_SERVICESEARCHREQUEST 0x02 - #define SDP_PDU_SERVICESEARCHRESPONSE 0x03 - #define SDP_PDU_SERVICEATTRIBUTEREQUEST 0x04 - #define SDP_PDU_SERVICEATTRIBUTERESPONSE 0x05 - #define SDP_PDU_SERVICESEARCHATTRIBUTEREQUEST 0x06 - #define SDP_PDU_SERVICESEARCHATTRIBUTERESPONSE 0x07 - - /* Enums: */ - /** Data sizes for SDP Data Element headers, to indicate the size of the data contained in the element. When creating - * a Data Element, a value from this enum should be ORed with a value from the \ref ServiceDiscovery_DataTypes_t enum. - */ - enum ServiceDiscovery_DataSizes_t - { - SDP_DATASIZE_8Bit = 0, /**< Contained data is 8 bits in length. */ - SDP_DATASIZE_16Bit = 1, /**< Contained data is 16 bits in length. */ - SDP_DATASIZE_32Bit = 2, /**< Contained data is 32 bits in length. */ - SDP_DATASIZE_64Bit = 3, /**< Contained data is 64 bits in length. */ - SDP_DATASIZE_128Bit = 4, /**< Contained data is 128 bits in length. */ - SDP_DATASIZE_Variable8Bit = 5, /**< Contained data is encoded in an 8 bit size integer following the header. */ - SDP_DATASIZE_Variable16Bit = 6, /**< Contained data is encoded in an 16 bit size integer following the header. */ - SDP_DATASIZE_Variable32Bit = 7, /**< Contained data is encoded in an 32 bit size integer following the header. */ - }; - - /** Data types for SDP Data Element headers, to indicate the type of data contained in the element. When creating - * a Data Element, a value from this enum should be ORed with a value from the \ref ServiceDiscovery_DataSizes_t enum. - */ - enum ServiceDiscovery_DataTypes_t - { - SDP_DATATYPE_Nill = (0 << 3), /**< Indicates the container data is a Nill (null) type. */ - SDP_DATATYPE_UnsignedInt = (1 << 3), /**< Indicates the container data is an unsigned integer. */ - SDP_DATATYPE_SignedInt = (2 << 3), /**< Indicates the container data is a signed integer. */ - SDP_DATATYPE_UUID = (3 << 3), /**< Indicates the container data is a UUID. */ - SDP_DATATYPE_String = (4 << 3), /**< Indicates the container data is an ASCII string. */ - SDP_DATATYPE_Boolean = (5 << 3), /**< Indicates the container data is a logical boolean. */ - SDP_DATATYPE_Sequence = (6 << 3), /**< Indicates the container data is a sequence of containers. */ - SDP_DATATYPE_Alternative = (7 << 3), /**< Indicates the container data is a sequence of alternative containers. */ - SDP_DATATYPE_URL = (8 << 3), /**< Indicates the container data is a URL. */ - }; - - /* Type Defines: */ - /** Header for all SPD transaction packets. This header is sent at the start of all SDP packets sent to or from a SDP - * server. - */ - typedef struct - { - uint8_t PDU; /**< SDP packet type, a \c SDP_PDU_* mask value */ - uint16_t TransactionID; /**< Unique transaction ID number to associate requests and responses */ - uint16_t ParameterLength; /**< Length of the data following the SDP header */ - } SDP_PDUHeader_t; - - /* Inline Functions: */ - /** Writes 8 bits of raw data to the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be written to - * \param[in] Data Data to write to the buffer - */ - static inline void SDP_WriteData8(void** BufferPos, - const uint8_t Data) - { - *((uint8_t*)*BufferPos) = Data; - *BufferPos += sizeof(uint8_t); - } - - /** Writes 16 bits of raw data to the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be written to - * \param[in] Data Data to write to the buffer - */ - static inline void SDP_WriteData16(void** BufferPos, - const uint16_t Data) - { - *((uint16_t*)*BufferPos) = SwapEndian_16(Data); - *BufferPos += sizeof(uint16_t); - } - - /** Writes 32 bits of raw data to the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be written to - * \param[in] Data Data to write to the buffer - */ - static inline void SDP_WriteData32(void** BufferPos, - const uint32_t Data) - { - *((uint32_t*)*BufferPos) = SwapEndian_32(Data); - *BufferPos += sizeof(uint32_t); - } - - /** Reads 8 bits of raw data from the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be read from - * - * \return Data read from the buffer - */ - static inline uint8_t SDP_ReadData8(const void** BufferPos) - { - uint8_t Data = *((const uint8_t*)*BufferPos); - *BufferPos += sizeof(uint8_t); - - return Data; - } - - /** Reads 16 bits of raw data from the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be read from - * - * \return Data read from the buffer - */ - static inline uint16_t SDP_ReadData16(const void** BufferPos) - { - uint16_t Data = SwapEndian_16(*((const uint16_t*)*BufferPos)); - *BufferPos += sizeof(uint16_t); - - return Data; - } - - /** Reads 32 bits of raw data from the given buffer, incrementing the buffer position afterwards. - * - * \param[in, out] BufferPos Current position in the buffer where the data is to be read from - * - * \return Data read from the buffer - */ - static inline uint32_t SDP_ReadData32(const void** BufferPos) - { - uint32_t Data = SwapEndian_32(*((const uint32_t*)*BufferPos)); - *BufferPos += sizeof(uint32_t); - - return Data; - } - - /** Adds a new Data Element Sequence container with a 16-bit size header to the buffer. The buffer - * pointer's position is advanced past the added header once the element has been added. The returned - * size header value is pre-zeroed out so that it can be incremented as data is placed into the Data - * Element Sequence container. - * - * The total added size of the container header is three bytes, regardless of the size of its contents - * as long as the contents' size in bytes fits into a 16-bit integer. - * - * \param[in, out] BufferPos Pointer to a buffer where the container header is to be placed - * - * \return Pointer to the 16-bit size value of the container header, which has been pre-zeroed - */ - static inline uint16_t* SDP_AddSequence16(void** BufferPos) - { - SDP_WriteData8(BufferPos, (SDP_DATASIZE_Variable16Bit | SDP_DATATYPE_Sequence)); - - uint16_t* SizePos = *BufferPos; - SDP_WriteData16(BufferPos, 0); - - return SizePos; - } - - /* Function Prototypes: */ - void SDP_ProcessPacket(void* Data, - Bluetooth_Channel_t* const Channel); - - #if defined(INCLUDE_FROM_SERVICEDISCOVERYPROTOCOL_C) - static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel); - static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel); - static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHeader, - Bluetooth_Channel_t* const Channel); - - static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* AttributeTable, - uint16_t AttributeList[][2], - const uint8_t TotalAttributes, - void** const BufferPos); - static uint16_t SDP_AddAttributeToResponse(const uint16_t AttributeID, - const void* AttributeValue, - void** ResponseBuffer); - static void* SDP_GetAttributeValue(const ServiceAttributeTable_t* AttributeTable, - const uint16_t AttributeID); - - static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES], - const uint8_t TotalUUIDs, - const ServiceAttributeTable_t* CurrAttributeTable); - static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], - const uint8_t TotalUUIDs, - uint16_t* const UUIDMatchFlags, - const void* CurrAttribute); - - static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2], - const void** const CurrentParameter); - static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES], - const void** const CurrentParameter); - - static uint32_t SDP_GetLocalAttributeContainerSize(const void* const AttributeData, - uint8_t* const HeaderSize); - static uint32_t SDP_GetDataElementSize(const void** const AttributeHeader, - uint8_t* const ElementHeaderSize); - #endif - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c deleted file mode 100644 index 1170121e4..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SDP Service Attribute definitions. This file contains the attributes - * and attribute tables of all the services the device supports, which can - * then be retrieved by a connected Bluetooth device via the SDP server. - */ - -#include "SDPServices.h" - -/** Serial Port Profile attribute, listing the unique service handle of the Serial Port service - * within the device. This handle can then be requested by the SDP client in future transactions - * in lieu of a search UUID list. - */ -const struct -{ - uint8_t Header; - uint32_t Data; -} PROGMEM SerialPort_Attribute_ServiceHandle = - { - (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_32Bit), - SWAPENDIAN_32(0x00010001), - }; - -/** Serial Port Profile attribute, listing the implemented Service Class UUIDs of the Serial Port service - * within the device. This list indicates all the class UUIDs that apply to the Serial Port service, so that - * a SDP client can search by a generalized class rather than a specific UUID to determine supported services. - */ -const struct -{ - uint8_t Header; - uint8_t Size; - ItemUUID_t UUIDList[]; -} PROGMEM SerialPort_Attribute_ServiceClassIDs = - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - (sizeof(ItemUUID_t) * 1), - { - {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), SP_CLASS_UUID}, - }, - }; - -/** Serial Port Profile attribute, listing the Protocols (and their attributes) of the Serial Port service - * within the device. This list indicates what protocols the service is layered on top of, as well as any - * configuration information for each layer. - */ -const struct -{ - uint8_t Header; - uint8_t Size; - - ItemProtocol_t L2CAP; - ItemProtocol_8BitParam_t RFCOMM; -} PROGMEM SerialPort_Attribute_ProtocolDescriptor = - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - (sizeof(ItemProtocol_t) + sizeof(ItemProtocol_8BitParam_t)), - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - sizeof(ItemUUID_t), - { - {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), L2CAP_UUID}, - }, - }, - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - (sizeof(ItemUUID_t) + sizeof(Item8Bit_t)), - { - {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), RFCOMM_UUID}, - {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_8Bit), 0x03}, - }, - }, - }; - -/** Serial Port Profile attribute, listing the Browse Group List UUIDs which this service is a member of. - * Browse Group UUIDs give a way to group together services within a device in a simple hierarchy, so that - * a SDP client can progressively narrow down an general browse to a specific service which it requires. - */ -const struct -{ - uint8_t Header; - uint8_t Size; - ItemUUID_t UUIDList[]; -} PROGMEM SerialPort_Attribute_BrowseGroupList = - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - (sizeof(ItemUUID_t) * 1), - { - {(SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit), PUBLICBROWSEGROUP_CLASS_UUID}, - }, - }; - -/** Serial Port Profile attribute, listing the languages (and their encodings) supported - * by the Serial Port service in its text string attributes. - */ -const struct -{ - uint8_t Header; - uint8_t Size; - ItemLangEncoding_t LanguageEncodings[]; -} PROGMEM SerialPort_Attribute_LanguageBaseIDOffset = - { - (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit), - (sizeof(ItemLangEncoding_t) * 1), - { - { - {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x454E)}, - {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x006A)}, - {(SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit), SWAPENDIAN_16(0x0100)}, - }, - }, - }; - -/** Serial Port Profile attribute, listing a human readable name of the service. */ -const struct -{ - uint8_t Header; - uint8_t Size; - char Text[]; -} PROGMEM SerialPort_Attribute_ServiceName = - { - (SDP_DATATYPE_String | SDP_DATASIZE_Variable8Bit), - sizeof("Wireless Serial Port") - 1, - "Wireless Serial Port", - }; - -/** Serial Port Profile attribute, listing a human readable description of the service. */ -const struct -{ - uint8_t Header; - uint8_t Size; - char Text[]; -} PROGMEM SerialPort_Attribute_ServiceDescription = - { - (SDP_DATATYPE_String | SDP_DATASIZE_Variable8Bit), - sizeof("Wireless Serial Port Service") - 1, - "Wireless Serial Port Service", - }; - -/** Service Attribute Table for the Serial Port service, linking each supported attribute ID to its data, so that - * the SDP server can retrieve it for transmission back to a SDP client upon request. - */ -const ServiceAttributeTable_t PROGMEM SerialPort_Attribute_Table[] = - { - {.AttributeID = SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE, .Data = &SerialPort_Attribute_ServiceHandle }, - {.AttributeID = SDP_ATTRIBUTE_ID_SERVICECLASSIDS, .Data = &SerialPort_Attribute_ServiceClassIDs }, - {.AttributeID = SDP_ATTRIBUTE_ID_PROTOCOLDESCRIPTORLIST, .Data = &SerialPort_Attribute_ProtocolDescriptor }, - {.AttributeID = SDP_ATTRIBUTE_ID_BROWSEGROUPLIST, .Data = &SerialPort_Attribute_BrowseGroupList }, - {.AttributeID = SDP_ATTRIBUTE_ID_LANGUAGEBASEATTROFFSET, .Data = &SerialPort_Attribute_LanguageBaseIDOffset}, - {.AttributeID = SDP_ATTRIBUTE_ID_SERVICENAME, .Data = &SerialPort_Attribute_ServiceName }, - {.AttributeID = SDP_ATTRIBUTE_ID_SERVICEDESCRIPTION, .Data = &SerialPort_Attribute_ServiceDescription }, - - SERVICE_ATTRIBUTE_TABLE_TERMINATOR - }; - diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h deleted file mode 100644 index 8850a29f2..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for SDPServices.c. - */ - -#ifndef _SDPSERVICES_H_ -#define _SDPSERVICES_H_ - - /* Includes: */ - #include "SDP.h" - - /* Macros: */ - /** Size of a full 128 bit UUID, in bytes. */ - #define UUID_SIZE_BYTES 16 - - /** First 80 bits common to all standardized Bluetooth services. */ - #define BASE_80BIT_UUID 0x0000, 0x0010, 0x0080, {0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB} - - #define RFCOMM_UUID {SWAPENDIAN_32(0x00000003), BASE_80BIT_UUID} - #define L2CAP_UUID {SWAPENDIAN_32(0x00000100), BASE_80BIT_UUID} - #define SP_CLASS_UUID {SWAPENDIAN_32(0x00001101), BASE_80BIT_UUID} - #define PUBLICBROWSEGROUP_CLASS_UUID {SWAPENDIAN_32(0x00001002), BASE_80BIT_UUID} - - #define SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE 0x0000 - #define SDP_ATTRIBUTE_ID_SERVICECLASSIDS 0x0001 - #define SDP_ATTRIBUTE_ID_PROTOCOLDESCRIPTORLIST 0x0004 - #define SDP_ATTRIBUTE_ID_BROWSEGROUPLIST 0x0005 - #define SDP_ATTRIBUTE_ID_LANGUAGEBASEATTROFFSET 0x0006 - #define SDP_ATTRIBUTE_ID_SERVICENAME 0x0100 - #define SDP_ATTRIBUTE_ID_SERVICEDESCRIPTION 0x0101 - - /** Terminator for a service attribute table of type \ref ServiceAttributeTable_t. */ - #define SERVICE_ATTRIBUTE_TABLE_TERMINATOR {.Data = NULL} - - /* Type Defines: */ - /** Type define for a UUID value structure. This struct can be used to hold full 128-bit UUIDs. */ - typedef struct - { - uint32_t A; /**< Bits 0-31 of the UUID. */ - uint16_t B; /**< Bits 32-47 of the UUID. */ - uint16_t C; /**< Bits 48-63 of the UUID. */ - uint16_t D; /**< Bits 64-79 of the UUID. */ - uint8_t E[6]; /**< Bits 80-127 of the UUID. */ - } UUID_t; - - /** Structure for the association of attribute ID values to an attribute value in FLASH. A table of these - * structures can then be built up for each supported UUID service within the device. - * - * \attention This table must be terminated with a \ref SERVICE_ATTRIBUTE_TABLE_TERMINATOR element. - */ - typedef struct - { - uint16_t AttributeID; /**< Attribute ID of the table element which the UUID service supports */ - const void* Data; /**< Pointer to the attribute data, located in PROGMEM memory space */ - } ServiceAttributeTable_t; - - /** Structure for a list of Data Elements containing 8-bit integers, for service attributes requiring such lists. */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_8Bit) */ - uint8_t Value; /**< Value to store in the list Data Element */ - } Item8Bit_t; - - /** Structure for a list of Data Elements containing 16-bit integers, for service attributes requiring such lists. */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit) */ - uint16_t Value; /**< Value to store in the list Data Element */ - } Item16Bit_t; - - /** Structure for a list of Data Elements containing 32-bit integers, for service attributes requiring such lists. */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_32Bit) */ - uint32_t Value; /**< Value to store in the list Data Element */ - } Item32Bit_t; - - /** Structure for a list of Data Elements containing UUIDs, for service attributes requiring UUID lists. */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit) */ - UUID_t UUID; /**< UUID to store in the list Data Element */ - } ItemUUID_t; - - /** Structure for a list of Data Elements Sequences containing UUID Data Elements, for service attributes requiring - * protocol lists. - */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ - uint8_t Size; /**< Size of the inner Data Element sequence */ - - struct - { - ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ - } Protocol; - } ItemProtocol_t; - - /** Structure for a list of Data Elements Sequences containing UUID Data Elements and an 8-bit param value, for service - * attributes requiring extended protocol lists containing an 8-bit value. - */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ - uint8_t Size; /**< Size of the inner Data Element sequence */ - - struct - { - ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ - Item8Bit_t Param; /**< 8-Bit Parameter associated with the service */ - } Protocol; - } ItemProtocol_8BitParam_t; - - /** Structure for a list of Data Elements Sequences containing UUID Data Elements and an 16-bit param value, for service - * attributes requiring extended protocol lists containing an 16-bit value. - */ - typedef struct - { - uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ - uint8_t Size; /**< Size of the inner Data Element sequence */ - - struct - { - ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ - Item16Bit_t Channel; /**< 16-Bit Parameter associated with the service */ - } Protocol; - } ItemProtocol_16BitParam_t; - - /** Structure for a list of Data Elements containing language encodings, including the language ID, Encoding ID and - * Attribute base offset. - */ - typedef struct - { - Item16Bit_t LanguageID; /**< Language ID for the current language */ - Item16Bit_t EncodingID; /**< Encoding used for the current language */ - Item16Bit_t OffsetID; /**< Attribute offset added to all strings using this language within the service */ - } ItemLangEncoding_t; - - /* External Variables: */ - extern const ServiceAttributeTable_t SerialPort_Attribute_Table[]; - extern const ServiceAttributeTable_t PnP_Attribute_Table[]; - -#endif - diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile deleted file mode 100644 index 14e74b6e5..000000000 --- a/Demos/Host/Incomplete/BluetoothHost/makefile +++ /dev/null @@ -1,733 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make coff = Convert ELF to AVR COFF. -# -# make extcoff = Convert ELF to AVR Extended COFF. -# -# make program = Download the hex file to the device, using avrdude. -# Please customize the avrdude settings below first! -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make dfu-ee = Download the eeprom file to the device, using dfu-programmer -# (must have dfu-programmer installed). -# -# make flip-ee = Download the eeprom file to the device, using Atmel FLIP -# (must have Atmel FLIP installed). -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make debug = Start either simulavr or avarice as specified for debugging, -# with avr-gdb or avr-insight as the front end for debugging. -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = at90usb1287 - - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = USBKEY - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 8000000 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = BluetoothHost - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# Path to the LUFA library -LUFA_PATH = ../../../.. - - -# LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - -# List C source files here. (C dependencies are automatically generated.) -SRC = $(TARGET).c \ - BluetoothEvents.c \ - DeviceDescriptor.c \ - ConfigDescriptor.c \ - Lib/BluetoothStack.c \ - Lib/BluetoothHCICommands.c \ - Lib/BluetoothACLPackets.c \ - Lib/SDP.c \ - Lib/SDPServices.c \ - Lib/RFCOMM.c \ - Lib/RFCOMMControl.c \ - $(LUFA_SRC_USB) \ - $(LUFA_SRC_SERIAL) - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = s - - -# Debugging format. -# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. -# AVR Studio 4.10 requires dwarf-2. -# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. -DEBUG = dwarf-2 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=c99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -CDEFS += -DF_USB=$(F_USB)UL -CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) -CDEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) -ADEFS += -DF_USB=$(F_USB)UL -ADEFS += -DBOARD=BOARD_$(BOARD) -ADEFS += $(LUFA_OPTS) - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -CPPDEFS += -DF_USB=$(F_USB)UL -CPPDEFS += -DBOARD=BOARD_$(BOARD) -CPPDEFS += $(LUFA_OPTS) -#CPPDEFS += -D__STDC_LIMIT_MACROS -#CPPDEFS += -D__STDC_CONSTANT_MACROS - - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fno-inline-small-functions -CFLAGS += -fpack-struct -CFLAGS += -fshort-enums -CFLAGS += -fno-strict-aliasing -CFLAGS += -Wall -CFLAGS += -Wstrict-prototypes -#CFLAGS += -mshort-calls -#CFLAGS += -fno-unit-at-a-time -#CFLAGS += -Wundef -#CFLAGS += -Wunreachable-code -#CFLAGS += -Wsign-compare -CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -fpack-struct -CPPFLAGS += -fshort-enums -CPPFLAGS += -fno-exceptions -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -mshort-calls -#CPPFLAGS += -fno-unit-at-a-time -#CPPFLAGS += -Wstrict-prototypes -#CPPFLAGS += -Wunreachable-code -#CPPFLAGS += -Wsign-compare -CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Library Options ---------------- -# Minimalistic printf version -PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min - -# Floating point printf version (requires MATH_LIB = -lm below) -PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt - -# If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = -#PRINTF_LIB = $(PRINTF_LIB_MIN) -#PRINTF_LIB = $(PRINTF_LIB_FLOAT) - - -# Minimalistic scanf version -SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min - -# Floating point + %[ scanf version (requires MATH_LIB = -lm below) -SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt - -# If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = -#SCANF_LIB = $(SCANF_LIB_MIN) -#SCANF_LIB = $(SCANF_LIB_FLOAT) - - -MATH_LIB = -lm - - -# List any extra directories to look for libraries here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = - - - -#---------------- External Memory Options ---------------- - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# used for variables (.data/.bss) and heap (malloc()). -#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff - -# 64 KB of external RAM, starting after internal RAM (ATmega128!), -# only used for heap (malloc()). -#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff - -EXTMEMOPTS = - - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax -LDFLAGS += -Wl,--gc-sections -LDFLAGS += $(EXTMEMOPTS) -LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) -LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) -#LDFLAGS += -T linker_script.x - - - -#---------------- Programming Options (avrdude) ---------------- - -# Programming hardware -# Type: avrdude -c ? -# to get a full listing. -# -AVRDUDE_PROGRAMMER = jtagmkII - -# com1 = serial port. Use lpt1 to connect to parallel port. -AVRDUDE_PORT = usb - -AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex -#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep - - -# Uncomment the following if you want avrdude's erase cycle counter. -# Note that this counter needs to be initialized first using -Yn, -# see avrdude manual. -#AVRDUDE_ERASE_COUNTER = -y - -# Uncomment the following if you do /not/ wish a verification to be -# performed after programming the device. -#AVRDUDE_NO_VERIFY = -V - -# Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See -# to submit bug reports. -#AVRDUDE_VERBOSE = -v -v - -AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) -AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) -AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) -AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) - - - -#---------------- Debugging Options ---------------- - -# For simulavr only - target MCU frequency. -DEBUG_MFREQ = $(F_CPU) - -# Set the DEBUG_UI to either gdb or insight. -# DEBUG_UI = gdb -DEBUG_UI = insight - -# Set the debugging back-end to either avarice, simulavr. -DEBUG_BACKEND = avarice -#DEBUG_BACKEND = simulavr - -# GDB Init Filename. -GDBINIT_FILE = __avr_gdbinit - -# When using avarice settings for the JTAG -JTAG_DEV = /dev/com1 - -# Debugging port used to communicate between GDB / avarice / simulavr. -DEBUG_PORT = 4242 - -# Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when -# avarice is running on a different computer. -DEBUG_HOST = localhost - - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr-gcc -OBJCOPY = avr-objcopy -OBJDUMP = avr-objdump -SIZE = avr-size -AR = avr-ar rcs -NM = avr-nm -AVRDUDE = avrdude -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_EXTENDED_COFF = Converting to AVR Extended COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex eep lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -eep: $(TARGET).eep -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - -# Program the device. -program: $(TARGET).hex $(TARGET).eep - $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) - -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $(TARGET).hex - dfu-programmer $(MCU) reset - -flip-ee: $(TARGET).hex $(TARGET).eep - $(COPY) $(TARGET).eep $(TARGET)eep.hex - batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - $(REMOVE) $(TARGET)eep.hex - -dfu-ee: $(TARGET).hex $(TARGET).eep - dfu-programmer $(MCU) eeprom-flash $(TARGET).eep - dfu-programmer $(MCU) reset - - -# Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set -# a breakpoint at main(). -gdb-config: - @$(REMOVE) $(GDBINIT_FILE) - @echo define reset >> $(GDBINIT_FILE) - @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) - @echo end >> $(GDBINIT_FILE) - @echo file $(TARGET).elf >> $(GDBINIT_FILE) - @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) -ifeq ($(DEBUG_BACKEND),simulavr) - @echo load >> $(GDBINIT_FILE) -endif - @echo break main >> $(GDBINIT_FILE) - -debug: gdb-config $(TARGET).elf -ifeq ($(DEBUG_BACKEND), avarice) - @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. - @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ - $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) - @$(WINSHELL) /c pause - -else - @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ - $(DEBUG_MFREQ) --port $(DEBUG_PORT) -endif - @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) - - - - -# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. -COFFCONVERT = $(OBJCOPY) --debugging -COFFCONVERT += --change-section-address .data-0x800000 -COFFCONVERT += --change-section-address .bss-0x800000 -COFFCONVERT += --change-section-address .noinit-0x800000 -COFFCONVERT += --change-section-address .eeprom-0x810000 - - - -coff: $(TARGET).elf - @echo - @echo $(MSG_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-avr $< $(TARGET).cof - - -extcoff: $(TARGET).elf - @echo - @echo $(MSG_EXTENDED_COFF) $(TARGET).cof - $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof - - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ - -%.eep: %.elf - @echo - @echo $(MSG_EEPROM) $@ - -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ - --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).eep - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - -doxygen: - @echo Generating Project Documentation \($(TARGET)\)... - @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ - exit 1; \ - fi; - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -checksource: - @for f in $(SRC) $(CPPSRC) $(ASRC); do \ - if [ -f $$f ]; then \ - echo "Found Source File: $$f" ; \ - else \ - echo "Source File Not Found: $$f" ; \ - fi; done - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex eep lss sym coff extcoff doxygen clean \ -clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config checksource -- cgit v1.2.3 From a9f0369facea9b1b29ee9cf7fedc47664e04e3b7 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 14:07:00 +0000 Subject: AppConfigHeaders: Switch DualRole and low level Host mode demos to use LUFAConfig.h configuration header files. --- .../MouseHostDevice/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../DualRole/ClassDriver/MouseHostDevice/makefile | 7 +- .../AndroidAccessoryHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/AndroidAccessoryHost/makefile | 6 +- .../LowLevel/AudioInputHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/AudioInputHost/makefile | 5 +- .../LowLevel/AudioOutputHost/AudioOutputHost.h | 6 ++ .../LowLevel/AudioOutputHost/AudioOutputHost.txt | 4 +- .../LowLevel/AudioOutputHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/AudioOutputHost/makefile | 8 +- .../LowLevel/GenericHIDHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/GenericHIDHost/makefile | 5 +- .../JoystickHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Host/LowLevel/JoystickHostWithParser/makefile | 5 +- .../Host/LowLevel/KeyboardHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/KeyboardHost/makefile | 5 +- .../KeyboardHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Host/LowLevel/KeyboardHostWithParser/makefile | 5 +- Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/MIDIHost/makefile | 5 +- .../LowLevel/MassStorageHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/MassStorageHost/makefile | 6 +- Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/MouseHost/makefile | 5 +- .../MouseHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/MouseHostWithParser/makefile | 5 +- .../Host/LowLevel/PrinterHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/PrinterHost/makefile | 5 +- .../LowLevel/RNDISEthernetHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/RNDISEthernetHost/makefile | 5 +- .../LowLevel/StillImageHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/StillImageHost/makefile | 5 +- .../LowLevel/VirtualSerialHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/LowLevel/VirtualSerialHost/makefile | 5 +- LUFA.pnproj | 2 +- 35 files changed, 1529 insertions(+), 58 deletions(-) create mode 100644 Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h create mode 100644 Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h b/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h new file mode 100644 index 000000000..49e4ebf2f --- /dev/null +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile index 296635cbd..5995864a3 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile @@ -120,10 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS += -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +168,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h new file mode 100644 index 000000000..f3307c61b --- /dev/null +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} + #define HOST_DEVICE_SETTLE_DELAY_MS 0 +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/makefile b/Demos/Host/LowLevel/AndroidAccessoryHost/makefile index bb944a295..63a9a1a55 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/makefile +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/makefile @@ -120,9 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +167,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/AudioInputHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/AudioInputHost/makefile b/Demos/Host/LowLevel/AudioInputHost/makefile index 7ab7c030d..7346fab64 100644 --- a/Demos/Host/LowLevel/AudioInputHost/makefile +++ b/Demos/Host/LowLevel/AudioInputHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h index 1834e7057..7f980cd8b 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h @@ -67,6 +67,12 @@ /** Maximum ADC range for the microphone input. */ #define ADC_MAX_RANGE 0x3FF + /** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */ + #define MICROPHONE_BIASED_TO_HALF_RAIL + + /** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */ + #define USE_TEST_TONE + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt index 0faeedc5c..1108994d0 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt @@ -64,12 +64,12 @@ * * * USE_TEST_TONE - * Makefile LUFA_OPTS + * AudioOutputHost.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * - * MICROPHONE_BIASED_TO_HALF_RAIL + * AudioOutputHost.h * Makefile LUFA_OPTS * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * diff --git a/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/AudioOutputHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/AudioOutputHost/makefile b/Demos/Host/LowLevel/AudioOutputHost/makefile index b1e267b6e..b396f8eef 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/makefile +++ b/Demos/Host/LowLevel/AudioOutputHost/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL -LUFA_OPTS += -D USE_TEST_TONE +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/GenericHIDHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile index d7e0dd0c3..854ad3662 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/makefile +++ b/Demos/Host/LowLevel/GenericHIDHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h b/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile index 0bdccd8cf..9537e6dfe 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile +++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/KeyboardHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile index 3624f0f52..fd22edd36 100644 --- a/Demos/Host/LowLevel/KeyboardHost/makefile +++ b/Demos/Host/LowLevel/KeyboardHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h b/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index b89960a34..bc4a148d2 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/MIDIHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile index 7bc3e5a65..eca942a92 100644 --- a/Demos/Host/LowLevel/MIDIHost/makefile +++ b/Demos/Host/LowLevel/MIDIHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h new file mode 100644 index 000000000..20b0912d4 --- /dev/null +++ b/Demos/Host/LowLevel/MassStorageHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY + #define USB_STREAM_TIMEOUT_MS 5000 +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile index ca783f0bf..dfa343160 100644 --- a/Demos/Host/LowLevel/MassStorageHost/makefile +++ b/Demos/Host/LowLevel/MassStorageHost/makefile @@ -120,9 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/MouseHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile index 694ab18f0..062334ef7 100644 --- a/Demos/Host/LowLevel/MouseHost/makefile +++ b/Demos/Host/LowLevel/MouseHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h b/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/MouseHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile index 67c9547ea..9432c6e20 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/makefile +++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/PrinterHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile index 8532cff0a..8408626de 100644 --- a/Demos/Host/LowLevel/PrinterHost/makefile +++ b/Demos/Host/LowLevel/PrinterHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile index 993361b3d..0a47edc65 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile +++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/StillImageHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile index f3f406710..023c1a1da 100644 --- a/Demos/Host/LowLevel/StillImageHost/makefile +++ b/Demos/Host/LowLevel/StillImageHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h b/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/LowLevel/VirtualSerialHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile index d545a3f87..c9cc1ccc9 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/makefile +++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/LUFA.pnproj b/LUFA.pnproj index 81f9141a3..f6873153e 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From 64d00efd915b8c3842c4fe93605bf8bc73def030 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 14:19:52 +0000 Subject: AppConfigHeaders: Switch class driver Host mode demos to use LUFAConfig.h configuration header files. --- .../AndroidAccessoryHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Host/ClassDriver/AndroidAccessoryHost/makefile | 6 +- .../ClassDriver/AudioInputHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/AudioInputHost/makefile | 5 +- .../ClassDriver/AudioOutputHost/AudioOutputHost.h | 6 ++ .../AudioOutputHost/AudioOutputHost.txt | 4 +- .../AudioOutputHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/AudioOutputHost/makefile | 8 +- .../JoystickHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../ClassDriver/JoystickHostWithParser/makefile | 5 +- .../ClassDriver/KeyboardHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/KeyboardHost/makefile | 5 +- .../KeyboardHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../ClassDriver/KeyboardHostWithParser/makefile | 5 +- .../Host/ClassDriver/MIDIHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/MIDIHost/makefile | 5 +- .../MassStorageHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/MassStorageHost/makefile | 6 +- .../Host/ClassDriver/MouseHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/MouseHost/makefile | 5 +- .../MouseHostWithParser/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Host/ClassDriver/MouseHostWithParser/makefile | 5 +- .../ClassDriver/PrinterHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/PrinterHost/makefile | 5 +- .../RNDISEthernetHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/RNDISEthernetHost/makefile | 5 +- .../ClassDriver/StillImageHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/StillImageHost/makefile | 5 +- .../VirtualSerialHost/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Host/ClassDriver/VirtualSerialHost/makefile | 5 +- LUFA.pnproj | 2 +- 31 files changed, 1339 insertions(+), 50 deletions(-) create mode 100644 Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h create mode 100644 Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h new file mode 100644 index 000000000..f3307c61b --- /dev/null +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} + #define HOST_DEVICE_SETTLE_DELAY_MS 0 +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile b/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile index 7c8df8967..0dc18a4b8 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/makefile @@ -120,9 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D HOST_DEVICE_SETTLE_DELAY_MS=0 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/AudioInputHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/AudioInputHost/makefile b/Demos/Host/ClassDriver/AudioInputHost/makefile index 825fe8c90..916a1939a 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/makefile +++ b/Demos/Host/ClassDriver/AudioInputHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h index 397958877..41a4e9f1d 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h @@ -65,6 +65,12 @@ /** Maximum ADC range for the microphone input. */ #define ADC_MAX_RANGE 0x3FF + /** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */ + #define MICROPHONE_BIASED_TO_HALF_RAIL + + /** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */ + #define USE_TEST_TONE + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt index 0faeedc5c..c28b61e44 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt @@ -64,13 +64,13 @@ * * * USE_TEST_TONE - * Makefile LUFA_OPTS + * AudioOutputHost.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * * MICROPHONE_BIASED_TO_HALF_RAIL - * Makefile LUFA_OPTS + * AudioOutputHost.h * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/AudioOutputHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/AudioOutputHost/makefile b/Demos/Host/ClassDriver/AudioOutputHost/makefile index 0b4fc76bd..9fd0f1e31 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/makefile +++ b/Demos/Host/ClassDriver/AudioOutputHost/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL -LUFA_OPTS += -D USE_TEST_TONE +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h b/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile index 0a341682b..1a6ac7aa7 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/KeyboardHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile index 3de63db59..95b002b71 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/makefile +++ b/Demos/Host/ClassDriver/KeyboardHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h b/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile index 425f1b4a6..d24c5db3d 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/MIDIHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile index f9afe6c42..e40e65cfc 100644 --- a/Demos/Host/ClassDriver/MIDIHost/makefile +++ b/Demos/Host/ClassDriver/MIDIHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h new file mode 100644 index 000000000..20b0912d4 --- /dev/null +++ b/Demos/Host/ClassDriver/MassStorageHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY + #define USB_STREAM_TIMEOUT_MS 5000 +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile index 30a87475f..0df6bb563 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/makefile +++ b/Demos/Host/ClassDriver/MassStorageHost/makefile @@ -120,9 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D USB_STREAM_TIMEOUT_MS=5000 +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -167,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/MouseHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile index 76ac8fdb8..9142dd3b9 100644 --- a/Demos/Host/ClassDriver/MouseHost/makefile +++ b/Demos/Host/ClassDriver/MouseHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h b/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile index 6a9ff6eb9..de349b449 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile +++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/PrinterHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile index bed185f5c..f77b829e3 100644 --- a/Demos/Host/ClassDriver/PrinterHost/makefile +++ b/Demos/Host/ClassDriver/PrinterHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile index b8d6e027d..99dc12e9b 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/StillImageHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile index c30fcc67c..2e1b4c534 100644 --- a/Demos/Host/ClassDriver/StillImageHost/makefile +++ b/Demos/Host/ClassDriver/StillImageHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h b/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h new file mode 100644 index 000000000..dab88310b --- /dev/null +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) +// #define USB_DEVICE_ONLY + #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL +// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here} +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} +// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here} +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile index 39d326ae5..8c7c256b2 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile +++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile @@ -120,8 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_HOST_ONLY -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -166,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/LUFA.pnproj b/LUFA.pnproj index f6873153e..b36f0869b 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From 13085a335125808f3b2f9adc495c6fe26053cebe Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 15:03:17 +0000 Subject: AppConfigHeaders: Switch low level Device mode demos to use LUFAConfig.h configuration header files. --- .../Device/Incomplete/Sideshow/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/Incomplete/Sideshow/makefile | 8 +- .../TestAndMeasurement/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Device/Incomplete/TestAndMeasurement/makefile | 9 +-- Demos/Device/LowLevel/AudioInput/AudioInput.h | 1 + Demos/Device/LowLevel/AudioInput/AudioInput.txt | 4 +- .../Device/LowLevel/AudioInput/Config/AppConfig.h | 0 .../Device/LowLevel/AudioInput/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/AudioInput/makefile | 9 +-- Demos/Device/LowLevel/AudioOutput/AudioOutput.h | 1 + Demos/Device/LowLevel/AudioOutput/AudioOutput.txt | 6 +- .../Device/LowLevel/AudioOutput/Config/AppConfig.h | 49 ++++++++++++ .../LowLevel/AudioOutput/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/AudioOutput/makefile | 12 +-- .../LowLevel/DualVirtualSerial/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/DualVirtualSerial/makefile | 8 +- .../Device/LowLevel/GenericHID/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/GenericHID/makefile | 8 +- Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/Joystick/makefile | 8 +- Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/Keyboard/makefile | 8 +- .../LowLevel/KeyboardMouse/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/KeyboardMouse/makefile | 8 +- Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/MIDI/makefile | 8 +- .../LowLevel/MassStorage/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/MassStorage/makefile | 9 +-- Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/Mouse/makefile | 8 +- .../LowLevel/RNDISEthernet/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../LowLevel/RNDISEthernet/Config/NetworkConfig.h | 55 +++++++++++++ Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h | 8 +- .../LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h | 2 + .../LowLevel/RNDISEthernet/RNDISEthernet.txt | 24 ++++-- Demos/Device/LowLevel/RNDISEthernet/makefile | 16 +--- .../LowLevel/VirtualSerial/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/LowLevel/VirtualSerial/makefile | 8 +- LUFA.pnproj | 2 +- Projects/Webserver/Config/AppConfig.h | 5 ++ Projects/Webserver/Lib/uIPManagement.h | 20 +---- Projects/Webserver/Webserver.txt | 11 ++- 42 files changed, 1477 insertions(+), 140 deletions(-) create mode 100644 Demos/Device/Incomplete/Sideshow/Config/LUFAConfig.h create mode 100644 Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/AudioInput/Config/AppConfig.h create mode 100644 Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h create mode 100644 Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h create mode 100644 Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h create mode 100644 Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h diff --git a/Demos/Device/Incomplete/Sideshow/Config/LUFAConfig.h b/Demos/Device/Incomplete/Sideshow/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/Incomplete/Sideshow/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index 93c71ce6a..5afc17208 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -173,7 +169,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index 918bebeb9..a2ba7c107 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -120,12 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.h b/Demos/Device/LowLevel/AudioInput/AudioInput.h index f274e24b4..fc2093716 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.h +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.h @@ -43,6 +43,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index dd3f6e682..17b476e24 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -73,13 +73,13 @@ * * * USE_TEST_TONE - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * * MICROPHONE_BIASED_TO_HALF_RAIL - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h b/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h new file mode 100644 index 000000000..e69de29bb diff --git a/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h b/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/AudioInput/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 82680a0b0..a917c82f1 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL -LUFA_OPTS += -D USE_TEST_TONE +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h index 8c5a2033b..3bcfc239e 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h @@ -43,6 +43,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index 090f8bed9..77e986617 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -73,17 +73,17 @@ * * * AUDIO_OUT_STEREO - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller. * * * AUDIO_OUT_MONO - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller. * * * AUDIO_OUT_PORTC - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an * external DAC. * diff --git a/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h b/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h new file mode 100644 index 000000000..01101649a --- /dev/null +++ b/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h @@ -0,0 +1,49 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MICROPHONE_BIASED_TO_HALF_RAIL + #define USE_TEST_TONE + +#endif \ No newline at end of file diff --git a/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h b/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/AudioOutput/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index e92ee2db0..4c32b3e2a 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -120,15 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D AUDIO_OUT_STEREO -#LUFA_OPTS += -D AUDIO_OUT_MONO -#LUFA_OPTS += -D AUDIO_OUT_PORTC +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -172,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h b/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index 9db0f9a0f..4e683e9e5 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h b/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 0feee3d83..95ed8b01b 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h b/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index d3fb67263..639304095 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h b/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index 10d71189d..9c36e4eaa 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h b/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index f560f929b..c56d990ff 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h b/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 6d3f2a205..38247459f 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h b/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 79b515f38..e07f1e882 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -120,12 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +166,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h b/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index 6779c88e2..dc4438f91 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h b/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h b/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h new file mode 100644 index 000000000..e6ac093ad --- /dev/null +++ b/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h @@ -0,0 +1,55 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Network Configuration Header File + * + * This header file is used to configure various portions of the + * network stack used by the application. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _NETWORK_CONFIG_H_ +#define _NETWORK_CONFIG_H_ + + #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} + #define SERVER_IP_ADDRESS { 10, 0, 0, 2} + + #define NO_DECODE_ETHERNET + #define NO_DECODE_ARP + #define NO_DECODE_IP + #define NO_DECODE_ICMP + #define NO_DECODE_TCP + #define NO_DECODE_UDP + #define NO_DECODE_DHCP + +#endif diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h index 4cd6a20aa..b878693bd 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h @@ -43,14 +43,10 @@ #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" + + #include "Config/NetworkConfig.h" /* Macros: */ - /** Protocol IP address of the host (client) machine, once assigned by DHCP. */ - #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} - - /** Protocol IP address of the virtual server machine. */ - #define SERVER_IP_ADDRESS { 10, 0, 0, 2} - /** Protocol IP address of the broadcast address. */ #define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF} diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h index 2807b6056..b3ad1affd 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h @@ -45,6 +45,8 @@ #include "EthernetProtocols.h" #include "Ethernet.h" + + #include "Config/NetworkConfig.h" /* Function Prototypes: */ void DecodeEthernetFrameHeader(void* InDataStart); diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index 3099ac0a6..08cb05324 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -84,38 +84,48 @@ * Description: * * + * CLIENT_IP_ADDRESS + * NetworkConfig.h + * Configures the IP address given to the client (PC) via the DHCP server. + * + * + * HOST_IP_ADDRESS + * NetworkConfig.h + * Configures the IP address used in the virtual server for communications to/from the client. + * + * * NO_DECODE_ETHERNET - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received Ethernet headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ARP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received ARP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_IP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received IP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ICMP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received ICMP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_TCP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received TCP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_UDP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received UDP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_DHCP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received DHCP headers will not be decoded and printed to the device serial port. * * diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index cf092e7d5..53afd78e6 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -120,19 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D NO_DECODE_ETHERNET -LUFA_OPTS += -D NO_DECODE_ARP -LUFA_OPTS += -D NO_DECODE_IP -LUFA_OPTS += -D NO_DECODE_ICMP -LUFA_OPTS += -D NO_DECODE_TCP -LUFA_OPTS += -D NO_DECODE_UDP -LUFA_OPTS += -D NO_DECODE_DHCP +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -187,7 +175,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h b/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index b3862a61e..1256bbdab 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -168,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/LUFA.pnproj b/LUFA.pnproj index b36f0869b..8819d27fb 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/Webserver/Config/AppConfig.h b/Projects/Webserver/Config/AppConfig.h index e2a9cd4de..0f26a7a60 100644 --- a/Projects/Webserver/Config/AppConfig.h +++ b/Projects/Webserver/Config/AppConfig.h @@ -48,6 +48,11 @@ #define ENABLE_TELNET_SERVER #define MAX_URI_LENGTH 50 + #define DEVICE_IP_ADDRESS (uint8_t[]){ 10, 0, 0, 2} + #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0} + #define DEVICE_GATEWAY (uint8_t[]){ 10, 0, 0, 1} + #define SERVER_MAC_ADDRESS (uint8_t[]){ 1, 0, 1, 0, 1, 0} + #define UIP_CONF_UDP (defined(ENABLE_DHCP_CLIENT) || defined(ENABLE_DHCP_SERVER)) #define UIP_CONF_BROADCAST 1 #define UIP_CONF_TCP 1 diff --git a/Projects/Webserver/Lib/uIPManagement.h b/Projects/Webserver/Lib/uIPManagement.h index 390d3c448..3e4e6a754 100644 --- a/Projects/Webserver/Lib/uIPManagement.h +++ b/Projects/Webserver/Lib/uIPManagement.h @@ -43,30 +43,14 @@ #include #include #include + + #include "Config/AppConfig.h" #include "DHCPClientApp.h" #include "DHCPServerApp.h" #include "HTTPServerApp.h" #include "TELNETServerApp.h" - /* Macros: */ - /** IP address that the webserver should use once connected to a RNDIS device (when DHCP is disabled). */ - #define DEVICE_IP_ADDRESS (uint8_t[]){10, 0, 0, 2} - - /** Netmask that the webserver should once connected to a RNDIS device (when DHCP is disabled). */ - #define DEVICE_NETMASK (uint8_t[]){255, 255, 255, 0} - - /** IP address of the default gateway the webserver should use when routing outside the local subnet - * (when DHCP is disabled). - */ - #define DEVICE_GATEWAY (uint8_t[]){10, 0, 0, 1} - - /** Ethernet MAC address of the virtual webserver. When in device RNDIS mode, the virtual webserver requires - * a unique MAC address that it can use when sending packets to the RNDIS adapter, which contains a seperate - * MAC address as set in the RNDIS class driver configuration structure. - */ - #define SERVER_MAC_ADDRESS (uint8_t[]){1, 0, 1, 0, 1, 0} - /* External Variables: */ extern struct uip_eth_addr MACAddress; diff --git a/Projects/Webserver/Webserver.txt b/Projects/Webserver/Webserver.txt index 9b466d9d0..d75f874e1 100644 --- a/Projects/Webserver/Webserver.txt +++ b/Projects/Webserver/Webserver.txt @@ -97,17 +97,17 @@ * * * DEVICE_IP_ADDRESS - * Lib/uIPManagement.h + * AppConfig.h * IP address that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined). * * * DEVICE_NETMASK - * Lib/uIPManagement.h + * AppConfig.h * Netmask that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT is not defined). * * * DEVICE_GATEWAY - * Lib/uIPManagement.h + * AppConfig.h * Default routing gateway that the webserver should use when connected to a RNDIS device (when ENABLE_DHCP_CLIENT * is not defined). * @@ -116,6 +116,11 @@ * AppConfig.h * Maximum length of a URI for the Webserver. This is the maximum file path, including subdirectories and separators. * + * + * SERVER_MAC_ADDRESS + * AppConfig.h + * MAC address of the server used when sending Ethernet packets onto the bus. + * * */ -- cgit v1.2.3 From 7f4462267aeb1f40ad6a9d582168d1b07e53d7f2 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 15:11:57 +0000 Subject: AppConfigHeaders: Oops - fix up AppConfig.h for the low level AudioOutput and AudioInput demos. --- .../Device/LowLevel/AudioInput/Config/AppConfig.h | 49 ++++++++++++++++++++++ .../Device/LowLevel/AudioOutput/Config/AppConfig.h | 5 ++- LUFA.pnproj | 2 +- 3 files changed, 53 insertions(+), 3 deletions(-) diff --git a/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h b/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h index e69de29bb..01101649a 100644 --- a/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h +++ b/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h @@ -0,0 +1,49 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MICROPHONE_BIASED_TO_HALF_RAIL + #define USE_TEST_TONE + +#endif \ No newline at end of file diff --git a/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h b/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h index 01101649a..8524166c8 100644 --- a/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h +++ b/Demos/Device/LowLevel/AudioOutput/Config/AppConfig.h @@ -43,7 +43,8 @@ #ifndef _APP_CONFIG_H_ #define _APP_CONFIG_H_ - #define MICROPHONE_BIASED_TO_HALF_RAIL - #define USE_TEST_TONE + #define AUDIO_OUT_STEREO +// #define AUDIO_OUT_MONO +// #define AUDIO_OUT_PORTC #endif \ No newline at end of file diff --git a/LUFA.pnproj b/LUFA.pnproj index 8819d27fb..476c955cb 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From 9a373c409435796165b2f315b7e3d6fa303d5e4a Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 17:17:45 +0000 Subject: AppConfigHeaders: Switch class driver Device mode demos to use LUFAConfig.h configuration header files. --- Demos/Device/ClassDriver/AudioInput/AudioInput.txt | 4 +- .../ClassDriver/AudioInput/Config/AppConfig.h | 49 ++++++++++++ .../ClassDriver/AudioInput/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/AudioInput/makefile | 9 +-- Demos/Device/ClassDriver/AudioOutput/AudioOutput.h | 1 + .../Device/ClassDriver/AudioOutput/AudioOutput.txt | 6 +- .../ClassDriver/AudioOutput/Config/AppConfig.h | 50 ++++++++++++ .../ClassDriver/AudioOutput/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/AudioOutput/makefile | 12 +-- .../DualVirtualSerial/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Device/ClassDriver/DualVirtualSerial/makefile | 8 +- .../ClassDriver/GenericHID/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/GenericHID/makefile | 8 +- .../ClassDriver/Joystick/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/Joystick/makefile | 8 +- .../ClassDriver/Keyboard/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/Keyboard/makefile | 8 +- .../ClassDriver/KeyboardMouse/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/KeyboardMouse/makefile | 8 +- .../KeyboardMouseMultiReport/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../ClassDriver/KeyboardMouseMultiReport/makefile | 8 +- Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/MIDI/makefile | 8 +- .../ClassDriver/MassStorage/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../MassStorageKeyboard/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../ClassDriver/MassStorageKeyboard/makefile | 9 +-- Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/Mouse/makefile | 8 +- .../ClassDriver/RNDISEthernet/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../RNDISEthernet/Config/NetworkConfig.h | 55 +++++++++++++ Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h | 7 +- .../RNDISEthernet/Lib/ProtocolDecoders.h | 1 + .../ClassDriver/RNDISEthernet/RNDISEthernet.txt | 14 ++-- Demos/Device/ClassDriver/RNDISEthernet/makefile | 16 +--- .../ClassDriver/VirtualSerial/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ Demos/Device/ClassDriver/VirtualSerial/makefile | 8 +- .../VirtualSerialMassStorage/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../ClassDriver/VirtualSerialMassStorage/makefile | 8 +- .../VirtualSerialMouse/Config/LUFAConfig.h | 93 ++++++++++++++++++++++ .../Device/ClassDriver/VirtualSerialMouse/makefile | 8 +- .../LowLevel/AudioOutputHost/AudioOutputHost.txt | 2 +- LUFA.pnproj | 2 +- 42 files changed, 1688 insertions(+), 125 deletions(-) create mode 100644 Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h create mode 100644 Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h create mode 100644 Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index dd3f6e682..17b476e24 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -73,13 +73,13 @@ * * * USE_TEST_TONE - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * * MICROPHONE_BIASED_TO_HALF_RAIL - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h b/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h new file mode 100644 index 000000000..01101649a --- /dev/null +++ b/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h @@ -0,0 +1,49 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MICROPHONE_BIASED_TO_HALF_RAIL + #define USE_TEST_TONE + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h b/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/AudioInput/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index bdd2a43aa..5d02c7737 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -120,14 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL -LUFA_OPTS += -D USE_TEST_TONE +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h index 9c6a0fb25..061cb0519 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h @@ -44,6 +44,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 090f8bed9..77e986617 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -73,17 +73,17 @@ * * * AUDIO_OUT_STEREO - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller. * * * AUDIO_OUT_MONO - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller. * * * AUDIO_OUT_PORTC - * Makefile LUFA_OPTS + * AppConfig.h * When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an * external DAC. * diff --git a/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h b/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h new file mode 100644 index 000000000..8524166c8 --- /dev/null +++ b/Demos/Device/ClassDriver/AudioOutput/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define AUDIO_OUT_STEREO +// #define AUDIO_OUT_MONO +// #define AUDIO_OUT_PORTC + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h b/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/AudioOutput/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index c6fae6368..1ce907ca2 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -120,15 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D AUDIO_OUT_STEREO -#LUFA_OPTS += -D AUDIO_OUT_MONO -#LUFA_OPTS += -D AUDIO_OUT_PORTC +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -173,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h b/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 8e4a2e318..5290c4fb1 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h b/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/GenericHID/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index 818bb39bd..5fd04d4e5 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USB_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h b/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/Joystick/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 5c5c48a51..955b5bd4f 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h b/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/Keyboard/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index eeb9e4f52..03913b7be 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h b/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/KeyboardMouse/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index 4892f07c7..ee4e43830 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile index 09768c4c8..93ce28617 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h b/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/MIDI/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 5dd2de5b5..9190344f7 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h b/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/MassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 92770f38a..5e8dbf49d 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -120,12 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" -LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -172,7 +167,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h b/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/Mouse/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index 1f38353c8..f54c896c2 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h b/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h new file mode 100644 index 000000000..a1d748267 --- /dev/null +++ b/Demos/Device/ClassDriver/RNDISEthernet/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h b/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h new file mode 100644 index 000000000..e6ac093ad --- /dev/null +++ b/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h @@ -0,0 +1,55 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Network Configuration Header File + * + * This header file is used to configure various portions of the + * network stack used by the application. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _NETWORK_CONFIG_H_ +#define _NETWORK_CONFIG_H_ + + #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} + #define SERVER_IP_ADDRESS { 10, 0, 0, 2} + + #define NO_DECODE_ETHERNET + #define NO_DECODE_ARP + #define NO_DECODE_IP + #define NO_DECODE_ICMP + #define NO_DECODE_TCP + #define NO_DECODE_UDP + #define NO_DECODE_DHCP + +#endif diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h index 2ed173f57..2d89ad52f 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h @@ -43,14 +43,9 @@ #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" + #include "Config/NetworkConfig.h" /* Macros: */ - /** Protocol IP address of the host (client) machine, once assigned by DHCP. */ - #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} - - /** Protocol IP address of the virtual server machine. */ - #define SERVER_IP_ADDRESS { 10, 0, 0, 2} - /** Protocol IP address of the broadcast address. */ #define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF} diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h index 2807b6056..aadbed822 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h @@ -45,6 +45,7 @@ #include "EthernetProtocols.h" #include "Ethernet.h" + #include "Config/NetworkConfig.h" /* Function Prototypes: */ void DecodeEthernetFrameHeader(void* InDataStart); diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index 3099ac0a6..f05ec65c2 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -85,37 +85,37 @@ * * * NO_DECODE_ETHERNET - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received Ethernet headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ARP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received ARP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_IP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received IP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ICMP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received ICMP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_TCP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received TCP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_UDP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received UDP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_DHCP - * Makefile LUFA_OPTS + * NetworkConfig.h * When defined, received DHCP headers will not be decoded and printed to the device serial port. * * diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 1062ccf56..4cc22a597 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -120,19 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" - -LUFA_OPTS += -D NO_DECODE_ETHERNET -LUFA_OPTS += -D NO_DECODE_ARP -LUFA_OPTS += -D NO_DECODE_IP -LUFA_OPTS += -D NO_DECODE_ICMP -LUFA_OPTS += -D NO_DECODE_TCP -LUFA_OPTS += -D NO_DECODE_UDP -LUFA_OPTS += -D NO_DECODE_DHCP +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -187,7 +175,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h b/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/VirtualSerial/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index 80b0c6076..5539d8ab2 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile index b515c5f45..a3bca4673 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -171,7 +167,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h b/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h new file mode 100644 index 000000000..f91ef1895 --- /dev/null +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 92ac5e890..5cd99d5ff 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -120,11 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_DEVICE_ONLY -LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8 -LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1 -LUFA_OPTS += -D USE_FLASH_DESCRIPTORS -LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)" +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile @@ -169,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt index 1108994d0..c28b61e44 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt @@ -69,8 +69,8 @@ * instead of sampling the board microphone. * * + * MICROPHONE_BIASED_TO_HALF_RAIL * AudioOutputHost.h - * Makefile LUFA_OPTS * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/LUFA.pnproj b/LUFA.pnproj index 476c955cb..e2b9f3948 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file -- cgit v1.2.3 From ae6a51492948d621907d3e62c03c2854e6fcc19c Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 18:42:12 +0000 Subject: AppConfigHeaders: Fix branch validation errors. --- Demos/Device/ClassDriver/AudioInput/makefile | 2 +- Demos/Device/ClassDriver/GenericHID/makefile | 2 +- Demos/Device/ClassDriver/MassStorage/makefile | 2 +- Demos/Device/LowLevel/AudioInput/makefile | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 5d02c7737..a63765eb0 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -165,7 +165,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index 5fd04d4e5..e4d802150 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -120,7 +120,7 @@ LUFA_PATH = ../../../.. # LUFA library compile-time options and predefined tokens -LUFA_OPTS = -D USB_LUFA_CONFIG_HEADER +LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER # Create the LUFA source path variables by including the LUFA root makefile diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index 155723627..be74104a0 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -172,7 +172,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index a917c82f1..c2288f7fc 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -164,7 +164,7 @@ DEBUG = dwarf-2 # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ +EXTRAINCDIRS = $(LUFA_PATH)/ Config/ # Compiler flag to set the C Standard level. -- cgit v1.2.3 From e9e6730d4999bea6e0eaefc2fce062ef090388b8 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 13 May 2012 21:01:23 +0000 Subject: AppConfigHeaders: Move out the last of the demo/app configurations into new AppConfig.h header files. --- Bootloaders/DFU/BootloaderDFU.h | 8 +-- Bootloaders/DFU/BootloaderDFU.txt | 4 +- Bootloaders/DFU/Config/AppConfig.h | 48 +++++++++++++++++ Demos/Device/ClassDriver/AudioInput/AudioInput.c | 2 +- Demos/Device/ClassDriver/AudioInput/AudioInput.h | 7 +-- Demos/Device/ClassDriver/AudioInput/AudioInput.txt | 5 ++ .../ClassDriver/AudioInput/Config/AppConfig.h | 2 + .../ClassDriver/GenericHID/Config/AppConfig.h | 48 +++++++++++++++++ Demos/Device/ClassDriver/GenericHID/Descriptors.h | 5 +- Demos/Device/ClassDriver/GenericHID/GenericHID.h | 3 +- Demos/Device/ClassDriver/GenericHID/GenericHID.txt | 6 +-- .../ClassDriver/MassStorage/Config/AppConfig.h | 50 ++++++++++++++++++ .../ClassDriver/MassStorage/Lib/DataflashManager.h | 3 ++ Demos/Device/ClassDriver/MassStorage/MassStorage.h | 10 +--- .../Device/ClassDriver/MassStorage/MassStorage.txt | 7 ++- .../MassStorageKeyboard/Config/AppConfig.h | 50 ++++++++++++++++++ .../MassStorageKeyboard/Lib/DataflashManager.h | 3 ++ .../MassStorageKeyboard/MassStorageKeyboard.h | 10 +--- .../MassStorageKeyboard/MassStorageKeyboard.txt | 8 ++- .../ClassDriver/RNDISEthernet/Config/AppConfig.h | 60 ++++++++++++++++++++++ .../RNDISEthernet/Config/NetworkConfig.h | 55 -------------------- .../ClassDriver/RNDISEthernet/Lib/Ethernet.h | 6 --- Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h | 2 +- .../RNDISEthernet/Lib/ProtocolDecoders.h | 2 +- .../ClassDriver/RNDISEthernet/RNDISEthernet.txt | 34 +++++++++--- .../VirtualSerialMassStorage/Config/AppConfig.h | 50 ++++++++++++++++++ .../Lib/DataflashManager.h | 3 ++ .../VirtualSerialMassStorage.h | 10 +--- .../VirtualSerialMassStorage.txt | 8 ++- Demos/Device/LowLevel/AudioInput/AudioInput.c | 2 +- Demos/Device/LowLevel/AudioInput/AudioInput.h | 6 --- .../Device/LowLevel/AudioInput/Config/AppConfig.h | 2 + .../Device/LowLevel/GenericHID/Config/AppConfig.h | 48 +++++++++++++++++ Demos/Device/LowLevel/GenericHID/Descriptors.h | 5 +- Demos/Device/LowLevel/GenericHID/GenericHID.h | 3 +- Demos/Device/LowLevel/GenericHID/GenericHID.txt | 6 +-- .../Device/LowLevel/MassStorage/Config/AppConfig.h | 50 ++++++++++++++++++ .../LowLevel/MassStorage/Lib/DataflashManager.h | 7 +-- Demos/Device/LowLevel/MassStorage/MassStorage.h | 4 +- Demos/Device/LowLevel/MassStorage/MassStorage.txt | 7 ++- Demos/Device/LowLevel/Mouse/Mouse.h | 1 + .../LowLevel/RNDISEthernet/Config/AppConfig.h | 60 ++++++++++++++++++++++ .../LowLevel/RNDISEthernet/Config/NetworkConfig.h | 55 -------------------- Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h | 6 --- Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h | 3 +- .../LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h | 3 +- .../LowLevel/RNDISEthernet/RNDISEthernet.txt | 32 ++++++++---- .../ClassDriver/AudioOutputHost/AudioOutputHost.c | 3 ++ .../ClassDriver/AudioOutputHost/AudioOutputHost.h | 14 +---- .../AudioOutputHost/AudioOutputHost.txt | 9 +++- .../ClassDriver/AudioOutputHost/Config/AppConfig.h | 51 ++++++++++++++++++ .../LowLevel/AudioOutputHost/AudioOutputHost.c | 3 ++ .../LowLevel/AudioOutputHost/AudioOutputHost.h | 13 +---- .../LowLevel/AudioOutputHost/AudioOutputHost.txt | 9 +++- .../LowLevel/AudioOutputHost/Config/AppConfig.h | 51 ++++++++++++++++++ LUFA.pnproj | 2 +- Projects/MIDIToneGenerator/Config/AppConfig.h | 48 +++++++++++++++++ Projects/MIDIToneGenerator/MIDIToneGenerator.h | 4 +- Projects/MIDIToneGenerator/MIDIToneGenerator.txt | 2 +- 59 files changed, 760 insertions(+), 258 deletions(-) create mode 100644 Bootloaders/DFU/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h create mode 100644 Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h delete mode 100644 Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h create mode 100644 Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h create mode 100644 Demos/Device/LowLevel/GenericHID/Config/AppConfig.h create mode 100644 Demos/Device/LowLevel/MassStorage/Config/AppConfig.h create mode 100644 Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h delete mode 100644 Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h create mode 100644 Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h create mode 100644 Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h create mode 100644 Projects/MIDIToneGenerator/Config/AppConfig.h diff --git a/Bootloaders/DFU/BootloaderDFU.h b/Bootloaders/DFU/BootloaderDFU.h index 46b70c0e9..ffd330d7f 100644 --- a/Bootloaders/DFU/BootloaderDFU.h +++ b/Bootloaders/DFU/BootloaderDFU.h @@ -49,18 +49,12 @@ #include "Descriptors.h" #include "BootloaderAPI.h" + #include "Config/AppConfig.h" #include #include /* Macros: */ - /** Configuration define. Define this token to true to case the bootloader to reject all memory commands - * until a memory erase has been performed. When used in conjunction with the lockbits of the AVR, this - * can protect the AVR's firmware from being dumped from a secured AVR. When false, memory operations are - * allowed at any time. - */ - #define SECURE_MODE false - /** Major bootloader version number. */ #define BOOTLOADER_VERSION_MINOR 2 diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index c7e1b1ed4..a4cc6e201 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -140,10 +140,10 @@ * * * SECURE_MODE - * BootloaderDFU.h + * AppConfig.h * If defined to \c true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an * erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from - * being dumped by unauthorized persons. + * being dumped by unauthorized persons. When false, all memory operations are allowed at any time. * * */ diff --git a/Bootloaders/DFU/Config/AppConfig.h b/Bootloaders/DFU/Config/AppConfig.h new file mode 100644 index 000000000..26a79b42c --- /dev/null +++ b/Bootloaders/DFU/Config/AppConfig.h @@ -0,0 +1,48 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define SECURE_MODE false + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index 867a09eef..953ecf8b6 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -94,7 +94,7 @@ void SetupHardware(void) USB_Init(); /* Start the ADC conversion in free running mode */ - ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK); + ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL)); } /** ISR to handle the reloading of the data endpoint with the next sample. */ diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/Demos/Device/ClassDriver/AudioInput/AudioInput.h index 6bf5e882a..fb5e69c8b 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.h +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.h @@ -49,14 +49,9 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" /* Macros: */ - /** ADC channel number for the microphone input. */ - #define MIC_IN_ADC_CHANNEL 2 - - /** ADC channel MUX mask for the microphone input. */ - #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 - /** Maximum audio sample value for the microphone input. */ #define SAMPLE_MAX_RANGE 0xFFFF diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index 17b476e24..654536c80 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -72,6 +72,11 @@ * Description: * * + * MIC_IN_ADC_CHANNEL + * AppConfig.h + * Sets the ADC channel used by the demo for the input audio samples from an attached microphone. + * + * * USE_TEST_TONE * AppConfig.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed diff --git a/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h b/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h index 01101649a..7702e259a 100644 --- a/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h +++ b/Demos/Device/ClassDriver/AudioInput/Config/AppConfig.h @@ -43,6 +43,8 @@ #ifndef _APP_CONFIG_H_ #define _APP_CONFIG_H_ + #define MIC_IN_ADC_CHANNEL 2 + #define MICROPHONE_BIASED_TO_HALF_RAIL #define USE_TEST_TONE diff --git a/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h b/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h new file mode 100644 index 000000000..fccd16e3b --- /dev/null +++ b/Demos/Device/ClassDriver/GenericHID/Config/AppConfig.h @@ -0,0 +1,48 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define GENERIC_REPORT_SIZE 8 + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/Demos/Device/ClassDriver/GenericHID/Descriptors.h index 0b9ec8f71..5e2740478 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.h +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.h @@ -40,6 +40,8 @@ #include #include + + #include "Config/AppConfig.h" /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the @@ -63,9 +65,6 @@ /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 - /** Size in bytes of the Generic HID reports (including report ID byte). */ - #define GENERIC_REPORT_SIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/Demos/Device/ClassDriver/GenericHID/GenericHID.h index ed3bb535c..7512fa918 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.h +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.h @@ -44,7 +44,8 @@ #include #include "Descriptors.h" - + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index db8eb1cec..998471a2c 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -67,9 +67,9 @@ * * * GENERIC_REPORT_SIZE - * Descriptors.h - * This token defines the size of the device reports, both sent and received. The value must be an - * integer ranging from 1 to 255. + * AppConfig.h + * This token defines the size of the device reports, both sent and received (including report ID byte). The value + * must be an integer ranging from 1 to 255. * * */ diff --git a/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h b/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h new file mode 100644 index 000000000..2582279ea --- /dev/null +++ b/Demos/Device/ClassDriver/MassStorage/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define TOTAL_LUNS 1 + + #define DISK_READ_ONLY false + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h index 18606eaf1..a7c6105fa 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h @@ -65,6 +65,9 @@ */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ + #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h index da01449d0..bd55dabfb 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h @@ -47,6 +47,7 @@ #include "Lib/SCSI.h" #include "Lib/DataflashManager.h" + #include "Config/AppConfig.h" #include #include @@ -68,15 +69,6 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - /** Total number of logical drives within the device - must be non-zero. */ - #define TOTAL_LUNS 1 - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - /* Function Prototypes: */ void SetupHardware(void); diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index e84e58427..c2761a38d 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -83,10 +83,15 @@ * * * TOTAL_LUNS - * MassStorage.h + * AppConfig.h * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - * this can be set to any positive non-zero amount. * + * + * DISK_READ_ONLY + * AppConfig.h + * Configuration define, indicating if the disk should be write protected or not. + * * */ diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h new file mode 100644 index 000000000..2582279ea --- /dev/null +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define TOTAL_LUNS 1 + + #define DISK_READ_ONLY false + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index f7552dc4a..e5d25e0a9 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -63,6 +63,9 @@ /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ + #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h index 8f8fa0029..dae07f9f5 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h @@ -50,6 +50,7 @@ #include "Lib/SCSI.h" #include "Lib/DataflashManager.h" + #include "Config/AppConfig.h" #include #include @@ -73,15 +74,6 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - /** Total number of logical drives within the device - must be non-zero. */ - #define TOTAL_LUNS 1 - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - /* Function Prototypes: */ void SetupHardware(void); diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index ba0415b85..01bf5772c 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -84,10 +84,14 @@ * * * TOTAL_LUNS - * MassStorage.h + * AppConfig.h * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - * this can be set to any positive non-zero amount. * - * + * + * DISK_READ_ONLY + * AppConfig.h + * Configuration define, indicating if the disk should be write protected or not. + * */ diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h b/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h new file mode 100644 index 000000000..3b1ca5366 --- /dev/null +++ b/Demos/Device/ClassDriver/RNDISEthernet/Config/AppConfig.h @@ -0,0 +1,60 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} + #define SERVER_IP_ADDRESS { 10, 0, 0, 2} + + #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + + #define NO_DECODE_ETHERNET + #define NO_DECODE_ARP + #define NO_DECODE_IP + #define NO_DECODE_ICMP + #define NO_DECODE_TCP + #define NO_DECODE_UDP + #define NO_DECODE_DHCP + +#endif diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h b/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h deleted file mode 100644 index e6ac093ad..000000000 --- a/Demos/Device/ClassDriver/RNDISEthernet/Config/NetworkConfig.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Network Configuration Header File - * - * This header file is used to configure various portions of the - * network stack used by the application. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _NETWORK_CONFIG_H_ -#define _NETWORK_CONFIG_H_ - - #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} - #define SERVER_IP_ADDRESS { 10, 0, 0, 2} - - #define NO_DECODE_ETHERNET - #define NO_DECODE_ARP - #define NO_DECODE_IP - #define NO_DECODE_ICMP - #define NO_DECODE_TCP - #define NO_DECODE_UDP - #define NO_DECODE_DHCP - -#endif diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h index aeebd0ac8..86e1a4038 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h @@ -52,12 +52,6 @@ #include "IP.h" /* Macros: */ - /** Physical MAC address of the USB RNDIS network adapter. */ - #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} - - /** Physical MAC address of the virtual server on the network. */ - #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} - /** Physical MAC address of the network broadcast address. */ #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h index 2d89ad52f..d1a709fbd 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h @@ -43,7 +43,7 @@ #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - #include "Config/NetworkConfig.h" + #include "Config/AppConfig.h" /* Macros: */ /** Protocol IP address of the broadcast address. */ diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h index aadbed822..bb640928d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h @@ -45,7 +45,7 @@ #include "EthernetProtocols.h" #include "Ethernet.h" - #include "Config/NetworkConfig.h" + #include "Config/AppConfig.h" /* Function Prototypes: */ void DecodeEthernetFrameHeader(void* InDataStart); diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index f05ec65c2..a458370da 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -84,38 +84,58 @@ * Description: * * + * CLIENT_IP_ADDRESS + * AppConfig.h + * Configures the IP address given to the client (PC) via the DHCP server. + * + * + * SERVER_IP_ADDRESS + * AppConfig.h + * Configures the IP address of the virtual server. + * + * + * ADAPTER_MAC_ADDRESS + * AppConfig.h + * Configures the MAC address of the RNDIS adapter on the host (PC) side. + * + * + * SERVER_MAC_ADDRESS + * AppConfig.h + * Configures the MAC address of the virtual server on the network. + * + * * NO_DECODE_ETHERNET - * NetworkConfig.h + * AppConfig.h * When defined, received Ethernet headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ARP - * NetworkConfig.h + * AppConfig.h * When defined, received ARP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_IP - * NetworkConfig.h + * AppConfig.h * When defined, received IP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ICMP - * NetworkConfig.h + * AppConfig.h * When defined, received ICMP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_TCP - * NetworkConfig.h + * AppConfig.h * When defined, received TCP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_UDP - * NetworkConfig.h + * AppConfig.h * When defined, received UDP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_DHCP - * NetworkConfig.h + * AppConfig.h * When defined, received DHCP headers will not be decoded and printed to the device serial port. * * diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h new file mode 100644 index 000000000..2582279ea --- /dev/null +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define TOTAL_LUNS 1 + + #define DISK_READ_ONLY false + +#endif \ No newline at end of file diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h index 1d1238658..4b26c245e 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h @@ -65,6 +65,9 @@ */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ + #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h index 486351b2f..49d63d087 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h @@ -47,6 +47,7 @@ #include "Lib/SCSI.h" #include "Lib/DataflashManager.h" + #include "Config/AppConfig.h" #include #include @@ -69,15 +70,6 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - /** Total number of logical drives within the device - must be non-zero. */ - #define TOTAL_LUNS 1 - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt index ff1d3c26e..088f20ac4 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt @@ -77,10 +77,14 @@ * * * TOTAL_LUNS - * MassStorage.h + * AppConfig.h * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive - * this can be set to any positive non-zero amount. * - * + * + * DISK_READ_ONLY + * AppConfig.h + * Configuration define, indicating if the disk should be write protected or not. + * */ diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.c b/Demos/Device/LowLevel/AudioInput/AudioInput.c index eb9c4b57c..925517b39 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.c +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.c @@ -77,7 +77,7 @@ void SetupHardware(void) USB_Init(); /* Start the ADC conversion in free running mode */ - ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK); + ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL)); } /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs, and diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.h b/Demos/Device/LowLevel/AudioInput/AudioInput.h index fc2093716..0539e0694 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.h +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.h @@ -52,12 +52,6 @@ #include /* Macros: */ - /** ADC channel number for the microphone input. */ - #define MIC_IN_ADC_CHANNEL 2 - - /** ADC channel MUX mask for the microphone input. */ - #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 - /** Maximum audio sample value for the microphone input. */ #define SAMPLE_MAX_RANGE 0xFFFF diff --git a/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h b/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h index 01101649a..7702e259a 100644 --- a/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h +++ b/Demos/Device/LowLevel/AudioInput/Config/AppConfig.h @@ -43,6 +43,8 @@ #ifndef _APP_CONFIG_H_ #define _APP_CONFIG_H_ + #define MIC_IN_ADC_CHANNEL 2 + #define MICROPHONE_BIASED_TO_HALF_RAIL #define USE_TEST_TONE diff --git a/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h b/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h new file mode 100644 index 000000000..fccd16e3b --- /dev/null +++ b/Demos/Device/LowLevel/GenericHID/Config/AppConfig.h @@ -0,0 +1,48 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define GENERIC_REPORT_SIZE 8 + +#endif \ No newline at end of file diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.h b/Demos/Device/LowLevel/GenericHID/Descriptors.h index e47220a1c..d9b7d42d3 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.h +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -67,9 +69,6 @@ /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 - /** Size in bytes of the Generic HID reports (including report ID byte). */ - #define GENERIC_REPORT_SIZE 8 - /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.h b/Demos/Device/LowLevel/GenericHID/GenericHID.h index 0fe06bb67..29bcabcbd 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.h +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.h @@ -45,7 +45,8 @@ #include #include "Descriptors.h" - + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index db8eb1cec..998471a2c 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -67,9 +67,9 @@ * * * GENERIC_REPORT_SIZE - * Descriptors.h - * This token defines the size of the device reports, both sent and received. The value must be an - * integer ranging from 1 to 255. + * AppConfig.h + * This token defines the size of the device reports, both sent and received (including report ID byte). The value + * must be an integer ranging from 1 to 255. * * */ diff --git a/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h b/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h new file mode 100644 index 000000000..2582279ea --- /dev/null +++ b/Demos/Device/LowLevel/MassStorage/Config/AppConfig.h @@ -0,0 +1,50 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define TOTAL_LUNS 1 + + #define DISK_READ_ONLY false + +#endif \ No newline at end of file diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h index d70a86c19..7612ddadb 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h @@ -45,7 +45,7 @@ #include #include #include - + /* Preprocessor Checks: */ #if (DATAFLASH_PAGE_SIZE % 16) #error Dataflash page size must be a multiple of 16 bytes. @@ -65,11 +65,6 @@ */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - /** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between - * each drive - this can be set to any positive non-zero amount. - */ - #define TOTAL_LUNS 1 - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.h b/Demos/Device/LowLevel/MassStorage/MassStorage.h index c1573706d..e457a6ed5 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.h +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.h @@ -46,6 +46,7 @@ #include "Lib/SCSI.h" #include "Lib/DataflashManager.h" + #include "Config/AppConfig.h" #include #include @@ -68,9 +69,6 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - /** Indicates if the disk is write protected or not. */ - #define DISK_READ_ONLY false - /* Global Variables: */ extern MS_CommandBlockWrapper_t CommandBlock; extern MS_CommandStatusWrapper_t CommandStatus; diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index 8d0488265..35b47a46a 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -83,10 +83,15 @@ * * * TOTAL_LUNS - * MassStorage.h + * AppConfig.h * Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive * - this can be set to any positive non-zero amount. * + * + * DISK_READ_ONLY + * AppConfig.h + * Indicates if the disk should be write protected or not. + * * */ diff --git a/Demos/Device/LowLevel/Mouse/Mouse.h b/Demos/Device/LowLevel/Mouse/Mouse.h index c04f457a1..182ea2511 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.h +++ b/Demos/Device/LowLevel/Mouse/Mouse.h @@ -45,6 +45,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h b/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h new file mode 100644 index 000000000..3b1ca5366 --- /dev/null +++ b/Demos/Device/LowLevel/RNDISEthernet/Config/AppConfig.h @@ -0,0 +1,60 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} + #define SERVER_IP_ADDRESS { 10, 0, 0, 2} + + #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + + #define NO_DECODE_ETHERNET + #define NO_DECODE_ARP + #define NO_DECODE_IP + #define NO_DECODE_ICMP + #define NO_DECODE_TCP + #define NO_DECODE_UDP + #define NO_DECODE_DHCP + +#endif diff --git a/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h b/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h deleted file mode 100644 index e6ac093ad..000000000 --- a/Demos/Device/LowLevel/RNDISEthernet/Config/NetworkConfig.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Network Configuration Header File - * - * This header file is used to configure various portions of the - * network stack used by the application. - * - * For information on what each token does, refer to the LUFA - * manual section "Summary of Compile Tokens". - */ - -#ifndef _NETWORK_CONFIG_H_ -#define _NETWORK_CONFIG_H_ - - #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} - #define SERVER_IP_ADDRESS { 10, 0, 0, 2} - - #define NO_DECODE_ETHERNET - #define NO_DECODE_ARP - #define NO_DECODE_IP - #define NO_DECODE_ICMP - #define NO_DECODE_TCP - #define NO_DECODE_UDP - #define NO_DECODE_DHCP - -#endif diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h index 37d482de2..06be68926 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h @@ -50,12 +50,6 @@ #include "IP.h" /* Macros: */ - /** Physical MAC address of the USB RNDIS network adapter. */ - #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} - - /** Physical MAC address of the virtual server on the network. */ - #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} - /** Physical MAC address of the network broadcast address. */ #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h index b878693bd..18c1c812b 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h @@ -43,8 +43,7 @@ #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - - #include "Config/NetworkConfig.h" + #include "Config/AppConfig.h" /* Macros: */ /** Protocol IP address of the broadcast address. */ diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h index b3ad1affd..bb640928d 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h @@ -45,8 +45,7 @@ #include "EthernetProtocols.h" #include "Ethernet.h" - - #include "Config/NetworkConfig.h" + #include "Config/AppConfig.h" /* Function Prototypes: */ void DecodeEthernetFrameHeader(void* InDataStart); diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index 08cb05324..a458370da 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -85,47 +85,57 @@ * * * CLIENT_IP_ADDRESS - * NetworkConfig.h + * AppConfig.h * Configures the IP address given to the client (PC) via the DHCP server. * * - * HOST_IP_ADDRESS - * NetworkConfig.h - * Configures the IP address used in the virtual server for communications to/from the client. + * SERVER_IP_ADDRESS + * AppConfig.h + * Configures the IP address of the virtual server. + * + * + * ADAPTER_MAC_ADDRESS + * AppConfig.h + * Configures the MAC address of the RNDIS adapter on the host (PC) side. + * + * + * SERVER_MAC_ADDRESS + * AppConfig.h + * Configures the MAC address of the virtual server on the network. * * * NO_DECODE_ETHERNET - * NetworkConfig.h + * AppConfig.h * When defined, received Ethernet headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ARP - * NetworkConfig.h + * AppConfig.h * When defined, received ARP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_IP - * NetworkConfig.h + * AppConfig.h * When defined, received IP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_ICMP - * NetworkConfig.h + * AppConfig.h * When defined, received ICMP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_TCP - * NetworkConfig.h + * AppConfig.h * When defined, received TCP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_UDP - * NetworkConfig.h + * AppConfig.h * When defined, received UDP headers will not be decoded and printed to the device serial port. * * * NO_DECODE_DHCP - * NetworkConfig.h + * AppConfig.h * When defined, received DHCP headers will not be decoded and printed to the device serial port. * * diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c index 833be1b2c..5f00568f5 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.c @@ -128,6 +128,9 @@ void SetupHardware(void) /* Create a stdio stream for the serial port for stdin and stdout */ Serial_CreateStream(NULL); + + /* Start the ADC conversion in free running mode */ + ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL)); } /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h index 41a4e9f1d..fa4801bfb 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h @@ -51,26 +51,16 @@ #include #include #include + + #include "Config/AppConfig.h" /* Macros: */ - /** ADC channel number for the microphone input. */ - #define MIC_IN_ADC_CHANNEL 2 - - /** ADC channel MUX mask for the microphone input. */ - #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 - /** Maximum audio sample value for the microphone input. */ #define SAMPLE_MAX_RANGE 0xFFFF /** Maximum ADC range for the microphone input. */ #define ADC_MAX_RANGE 0x3FF - /** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */ - #define MICROPHONE_BIASED_TO_HALF_RAIL - - /** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */ - #define USE_TEST_TONE - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt index c28b61e44..b2cd2a8c8 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.txt @@ -63,14 +63,19 @@ * Description: * * + * MIC_IN_ADC_CHANNEL + * AppConfig.h + * Sets the ADC channel used by the demo for the input audio samples from an attached microphone. + * + * * USE_TEST_TONE - * AudioOutputHost.h + * AppConfig.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * * MICROPHONE_BIASED_TO_HALF_RAIL - * AudioOutputHost.h + * AppConfig.h * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h b/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h new file mode 100644 index 000000000..7702e259a --- /dev/null +++ b/Demos/Host/ClassDriver/AudioOutputHost/Config/AppConfig.h @@ -0,0 +1,51 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MIC_IN_ADC_CHANNEL 2 + + #define MICROPHONE_BIASED_TO_HALF_RAIL + #define USE_TEST_TONE + +#endif \ No newline at end of file diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c index a1f255f16..eddd38f97 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.c @@ -74,6 +74,9 @@ void SetupHardware(void) /* Create a stdio stream for the serial port for stdin and stdout */ Serial_CreateStream(NULL); + + /* Start the ADC conversion in free running mode */ + ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_GET_CHANNEL_MASK(MIC_IN_ADC_CHANNEL)); } /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h index 7f980cd8b..2c475821c 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h @@ -53,26 +53,15 @@ #include #include "ConfigDescriptor.h" + #include "Config/AppConfig.h" /* Macros: */ - /** ADC channel number for the microphone input. */ - #define MIC_IN_ADC_CHANNEL 2 - - /** ADC channel MUX mask for the microphone input. */ - #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 - /** Maximum audio sample value for the microphone input. */ #define SAMPLE_MAX_RANGE 0xFFFF /** Maximum ADC range for the microphone input. */ #define ADC_MAX_RANGE 0x3FF - /** Defined to indicate that the microphone input voltage is biased to half the ADC reference voltage. */ - #define MICROPHONE_BIASED_TO_HALF_RAIL - - /** Defined to generate test tone when a button is pressed, rather than use a microphone for audio samples. */ - #define USE_TEST_TONE - /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt index c28b61e44..b2cd2a8c8 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.txt @@ -63,14 +63,19 @@ * Description: * * + * MIC_IN_ADC_CHANNEL + * AppConfig.h + * Sets the ADC channel used by the demo for the input audio samples from an attached microphone. + * + * * USE_TEST_TONE - * AudioOutputHost.h + * AppConfig.h * When defined, this alters the demo to produce a square wave test tone when the first board button is pressed * instead of sampling the board microphone. * * * MICROPHONE_BIASED_TO_HALF_RAIL - * AudioOutputHost.h + * AppConfig.h * When defined, this alters the demo so that the half VCC bias of the microphone input is subtracted. * * diff --git a/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h b/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h new file mode 100644 index 000000000..7702e259a --- /dev/null +++ b/Demos/Host/LowLevel/AudioOutputHost/Config/AppConfig.h @@ -0,0 +1,51 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MIC_IN_ADC_CHANNEL 2 + + #define MICROPHONE_BIASED_TO_HALF_RAIL + #define USE_TEST_TONE + +#endif \ No newline at end of file diff --git a/LUFA.pnproj b/LUFA.pnproj index e2b9f3948..520063da5 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/MIDIToneGenerator/Config/AppConfig.h b/Projects/MIDIToneGenerator/Config/AppConfig.h new file mode 100644 index 000000000..381efe089 --- /dev/null +++ b/Projects/MIDIToneGenerator/Config/AppConfig.h @@ -0,0 +1,48 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2012. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure some of + * the application's compile time options, as an alternative to + * specifying the compile time constants supplied through a + * makefile or build system. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + + #define MAX_SIMULTANEOUS_NOTES 3 + +#endif \ No newline at end of file diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.h b/Projects/MIDIToneGenerator/MIDIToneGenerator.h index 540c59a17..db11d5e0d 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.h +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.h @@ -45,6 +45,7 @@ #include #include "Descriptors.h" + #include "Config/AppConfig.h" #include #include @@ -76,9 +77,6 @@ /** Lowest valid MIDI pitch index */ #define BASE_PITCH_INDEX 21 - /** Maximum number of MIDI notes that can be played simultaneously */ - #define MAX_SIMULTANEOUS_NOTES 3 - /** Number of samples in the virtual sample table (can be expanded to lower maximum frequency, but allow for * more simultaneous notes due to the reduced amount of processing time needed when the samples are spaced out) */ diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.txt b/Projects/MIDIToneGenerator/MIDIToneGenerator.txt index 6332a244e..2650a9c0e 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.txt +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.txt @@ -64,7 +64,7 @@ * * * MAX_SIMULTANEOUS_NOTES - * MIDIToneGenerator.h + * AppConfig.h * Sets the maximum number of MIDI notes that can be generated simultaneously. More notes require more processing time, * and thus a value that is too high will cause audiable sound distortion due to insufficient CPU time. * -- cgit v1.2.3 From cb9e7392c5f9f1c51710df1b4bbe1aa11168576f Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 15 May 2012 19:51:41 +0000 Subject: AppConfigHeaders: Make sure that in applications using an AppConfig.h configuration file, all application headers include the configuration file. --- Bootloaders/CDC/BootloaderAPI.h | 2 ++ Bootloaders/CDC/Descriptors.h | 2 ++ Bootloaders/DFU/BootloaderAPI.h | 2 ++ Bootloaders/DFU/Descriptors.h | 2 ++ Demos/Device/ClassDriver/AudioInput/AudioInput.h | 1 - Demos/Device/ClassDriver/AudioInput/Descriptors.h | 2 ++ Demos/Device/ClassDriver/AudioOutput/AudioOutput.h | 1 - Demos/Device/ClassDriver/AudioOutput/Descriptors.h | 2 ++ Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h | 1 - Demos/Device/ClassDriver/GenericHID/GenericHID.h | 1 - Demos/Device/ClassDriver/Joystick/Joystick.h | 1 - Demos/Device/ClassDriver/Keyboard/Keyboard.h | 1 - Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h | 1 - .../ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h | 1 - Demos/Device/ClassDriver/MIDI/MIDI.h | 1 - Demos/Device/ClassDriver/MassStorage/Descriptors.h | 2 ++ Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h | 3 ++- Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h | 3 ++- Demos/Device/ClassDriver/MassStorage/MassStorage.h | 1 - Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h | 2 ++ Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h | 3 ++- Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h | 3 ++- Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h | 1 - Demos/Device/ClassDriver/Mouse/Mouse.h | 1 - Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h | 2 ++ Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h | 2 ++ Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h | 4 ++-- Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h | 1 - Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h | 2 ++ .../ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h | 1 + Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h | 3 ++- .../ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h | 1 - Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h | 1 - Demos/Device/Incomplete/Sideshow/Sideshow.h | 1 - Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h | 1 - Demos/Device/LowLevel/AudioInput/AudioInput.h | 1 - Demos/Device/LowLevel/AudioInput/Descriptors.h | 2 ++ Demos/Device/LowLevel/AudioOutput/AudioOutput.h | 1 - Demos/Device/LowLevel/AudioOutput/Descriptors.h | 2 ++ Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h | 1 - Demos/Device/LowLevel/GenericHID/GenericHID.h | 1 - Demos/Device/LowLevel/Joystick/Joystick.h | 1 - Demos/Device/LowLevel/Keyboard/Keyboard.h | 1 - Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h | 1 - Demos/Device/LowLevel/MIDI/MIDI.h | 1 - Demos/Device/LowLevel/MassStorage/Descriptors.h | 2 ++ Demos/Device/LowLevel/MassStorage/MassStorage.h | 1 - Demos/Device/LowLevel/Mouse/Mouse.h | 1 - Demos/Device/LowLevel/RNDISEthernet/Descriptors.h | 2 ++ Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h | 2 ++ Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h | 4 ++-- Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h | 1 - Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h | 1 - Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h | 1 - Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h | 1 - Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h | 1 - .../Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h | 1 - Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h | 1 - .../Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h | 1 - Demos/Host/ClassDriver/MIDIHost/MIDIHost.h | 1 - Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h | 1 - Demos/Host/ClassDriver/MouseHost/MouseHost.h | 1 - Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h | 1 - Demos/Host/ClassDriver/PrinterHost/PrinterHost.h | 1 - Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h | 1 - Demos/Host/ClassDriver/StillImageHost/StillImageHost.h | 1 - Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h | 1 - Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h | 1 - Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h | 1 - Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h | 1 - Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h | 3 ++- Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h | 1 - Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h | 1 - Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h | 1 - Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h | 1 - Demos/Host/LowLevel/MIDIHost/MIDIHost.h | 1 - Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h | 1 - Demos/Host/LowLevel/MouseHost/MouseHost.h | 1 - Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h | 1 - Demos/Host/LowLevel/PrinterHost/PrinterHost.h | 1 - Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h | 1 - Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h | 1 - LUFA.pnproj | 2 +- Projects/AVRISP-MKII/AVRISP-MKII.h | 1 - Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h | 3 ++- Projects/AVRISP-MKII/Lib/V2Protocol.h | 2 +- Projects/AVRISP-MKII/Lib/V2ProtocolParams.h | 2 -- Projects/Benito/Benito.h | 1 - Projects/HIDReportViewer/HIDReportViewer.h | 1 - Projects/LEDNotifier/LEDNotifier.h | 1 - Projects/MIDIToneGenerator/Descriptors.h | 2 ++ Projects/MIDIToneGenerator/MIDIToneGenerator.h | 1 - Projects/Magstripe/Magstripe.h | 1 - Projects/MediaController/MediaController.h | 1 - Projects/MissileLauncher/MissileLauncher.h | 1 - Projects/RelayBoard/RelayBoard.h | 1 - Projects/SerialToLCD/SerialToLCD.h | 1 - Projects/TempDataLogger/Descriptors.h | 1 + Projects/TempDataLogger/TempDataLogger.h | 1 - Projects/USBtoSerial/USBtoSerial.h | 1 - Projects/Webserver/Descriptors.h | 2 ++ Projects/Webserver/USBDeviceMode.h | 5 +++-- Projects/Webserver/USBHostMode.h | 1 + Projects/Webserver/Webserver.h | 2 +- Projects/XPLAINBridge/AVRISPDescriptors.h | 2 ++ Projects/XPLAINBridge/Lib/SoftUART.h | 3 ++- Projects/XPLAINBridge/USARTDescriptors.h | 2 ++ Projects/XPLAINBridge/XPLAINBridge.h | 1 - 108 files changed, 69 insertions(+), 89 deletions(-) diff --git a/Bootloaders/CDC/BootloaderAPI.h b/Bootloaders/CDC/BootloaderAPI.h index bd7218421..d47c2efc7 100644 --- a/Bootloaders/CDC/BootloaderAPI.h +++ b/Bootloaders/CDC/BootloaderAPI.h @@ -43,6 +43,8 @@ #include + #include "Config/AppConfig.h" + /* Function Prototypes: */ void BootloaderAPI_ErasePage(const uint32_t Address); void BootloaderAPI_WritePage(const uint32_t Address); diff --git a/Bootloaders/CDC/Descriptors.h b/Bootloaders/CDC/Descriptors.h index 0010fc69b..6eec9d370 100644 --- a/Bootloaders/CDC/Descriptors.h +++ b/Bootloaders/CDC/Descriptors.h @@ -39,6 +39,8 @@ /* Includes: */ #include + #include "Config/AppConfig.h" + /* Macros: */ #if defined(__AVR_AT90USB1287__) #define AVR_SIGNATURE_1 0x1E diff --git a/Bootloaders/DFU/BootloaderAPI.h b/Bootloaders/DFU/BootloaderAPI.h index bd7218421..8d0404979 100644 --- a/Bootloaders/DFU/BootloaderAPI.h +++ b/Bootloaders/DFU/BootloaderAPI.h @@ -43,6 +43,8 @@ #include + #include "Config/AppConfig.h" + /* Function Prototypes: */ void BootloaderAPI_ErasePage(const uint32_t Address); void BootloaderAPI_WritePage(const uint32_t Address); diff --git a/Bootloaders/DFU/Descriptors.h b/Bootloaders/DFU/Descriptors.h index ce9cc9379..e1ad51a80 100644 --- a/Bootloaders/DFU/Descriptors.h +++ b/Bootloaders/DFU/Descriptors.h @@ -39,6 +39,8 @@ /* Includes: */ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Descriptor type value for a DFU class functional descriptor. */ #define DTYPE_DFUFunctional 0x21 diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/Demos/Device/ClassDriver/AudioInput/AudioInput.h index fb5e69c8b..6af4a1efe 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.h +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.h @@ -42,7 +42,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/Demos/Device/ClassDriver/AudioInput/Descriptors.h index 359a28730..a3f7f261a 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h index 061cb0519..19ba276f3 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h @@ -46,7 +46,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index d5c8a2b84..4b294b805 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h index 320f7dc36..e29fdee3e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/Demos/Device/ClassDriver/GenericHID/GenericHID.h index 7512fa918..4c4e33b2a 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.h +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.h @@ -46,7 +46,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.h b/Demos/Device/ClassDriver/Joystick/Joystick.h index 4bc505654..8c51ae62b 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.h +++ b/Demos/Device/ClassDriver/Joystick/Joystick.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.h b/Demos/Device/ClassDriver/Keyboard/Keyboard.h index f79955121..ed6600a32 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.h +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h index 14db865c8..d86a4338b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h @@ -41,7 +41,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h index 14db865c8..d86a4338b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/KeyboardMouseMultiReport.h @@ -41,7 +41,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.h b/Demos/Device/ClassDriver/MIDI/MIDI.h index b4d782726..fe49e89fe 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.h +++ b/Demos/Device/ClassDriver/MIDI/MIDI.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/Demos/Device/ClassDriver/MassStorage/Descriptors.h index 84879e822..643747b36 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h index a7c6105fa..65c4f60b0 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h @@ -41,7 +41,8 @@ #include "../MassStorage.h" #include "../Descriptors.h" - + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h index d44662382..610d3672c 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h @@ -45,7 +45,8 @@ #include "../MassStorage.h" #include "../Descriptors.h" #include "DataflashManager.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h index bd55dabfb..957a880d9 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h @@ -49,7 +49,6 @@ #include "Lib/DataflashManager.h" #include "Config/AppConfig.h" - #include #include #include diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h index fb1a3794f..f79cd2ee6 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h @@ -42,6 +42,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPADDR (ENDPOINT_DIR_IN | 1) diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index e5d25e0a9..68356b2c5 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -41,7 +41,8 @@ #include "../MassStorageKeyboard.h" #include "../Descriptors.h" - + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h index 5c3d3bf97..55ead069c 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h @@ -45,7 +45,8 @@ #include "../MassStorageKeyboard.h" #include "../Descriptors.h" #include "DataflashManager.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h index dae07f9f5..6c0f1d9e1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h @@ -52,7 +52,6 @@ #include "Lib/DataflashManager.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.h b/Demos/Device/ClassDriver/Mouse/Mouse.h index 73f9742a8..4d6c27e51 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.h +++ b/Demos/Device/ClassDriver/Mouse/Mouse.h @@ -47,7 +47,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h index 6301b83aa..9baae86e7 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h index 86e1a4038..4e91bc268 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h @@ -42,6 +42,8 @@ #include + #include "Config/AppConfig.h" + #include "EthernetProtocols.h" #include "ProtocolDecoders.h" #include "ICMP.h" diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h index 6ff089647..e70fd5d63 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h @@ -49,8 +49,8 @@ #include "Lib/TCP.h" #include "Lib/ARP.h" #include "Lib/Webserver.h" - - #include + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h index ce7de149f..3baeafebd 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h index 544a2b5c0..e2d856267 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 1) diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h index 4b26c245e..e9e2ef97f 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h @@ -41,6 +41,7 @@ #include "../VirtualSerialMassStorage.h" #include "../Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h index 83d5646c4..01614cc1c 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h @@ -45,7 +45,8 @@ #include "../VirtualSerialMassStorage.h" #include "../Descriptors.h" #include "DataflashManager.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h index 49d63d087..3d17971d5 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.h @@ -49,7 +49,6 @@ #include "Lib/DataflashManager.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h index 22f86e590..7a5c1d762 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/Incomplete/Sideshow/Sideshow.h b/Demos/Device/Incomplete/Sideshow/Sideshow.h index 71ebe3f2a..dc404ba84 100644 --- a/Demos/Device/Incomplete/Sideshow/Sideshow.h +++ b/Demos/Device/Incomplete/Sideshow/Sideshow.h @@ -40,7 +40,6 @@ #include "Descriptors.h" #include "Lib/SideshowCommands.h" - #include #include #include #include diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h index a688baeb5..bd93154f8 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h @@ -39,7 +39,6 @@ #include "Descriptors.h" - #include #include #include diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.h b/Demos/Device/LowLevel/AudioInput/AudioInput.h index 0539e0694..f534e8198 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.h +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.h @@ -45,7 +45,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.h b/Demos/Device/LowLevel/AudioInput/Descriptors.h index 4680294c9..7c419a2f7 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Audio isochronous streaming data IN endpoint. */ #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_IN | 1) diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h index 3bcfc239e..fad49ec09 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h @@ -45,7 +45,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/Demos/Device/LowLevel/AudioOutput/Descriptors.h index e0c756744..c8b7feaf1 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Audio isochronous streaming data OUT endpoint. */ #define AUDIO_STREAM_EPADDR (ENDPOINT_DIR_OUT | 1) diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h index cf7316ca6..5edbb18fe 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.h b/Demos/Device/LowLevel/GenericHID/GenericHID.h index 29bcabcbd..26e63ce98 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.h +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.h @@ -47,7 +47,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include diff --git a/Demos/Device/LowLevel/Joystick/Joystick.h b/Demos/Device/LowLevel/Joystick/Joystick.h index f3cdf36b7..7a7cf6111 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.h +++ b/Demos/Device/LowLevel/Joystick/Joystick.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.h b/Demos/Device/LowLevel/Keyboard/Keyboard.h index 4936527e3..140fa0265 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.h +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.h @@ -47,7 +47,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h index a50a29e23..fe0c65015 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h @@ -42,7 +42,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/MIDI/MIDI.h b/Demos/Device/LowLevel/MIDI/MIDI.h index 8b08ddc1c..f270c09f9 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.h +++ b/Demos/Device/LowLevel/MIDI/MIDI.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h index 34a85f6d1..3732ee879 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.h +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.h b/Demos/Device/LowLevel/MassStorage/MassStorage.h index e457a6ed5..37f3ae5a3 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.h +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.h @@ -48,7 +48,6 @@ #include "Lib/DataflashManager.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/Mouse/Mouse.h b/Demos/Device/LowLevel/Mouse/Mouse.h index 182ea2511..b304a61bc 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.h +++ b/Demos/Device/LowLevel/Mouse/Mouse.h @@ -47,7 +47,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h index 6337335ac..dd9bdd014 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host data IN endpoint. */ #define CDC_TX_EPADDR (ENDPOINT_DIR_IN | 1) diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h index 06be68926..45ba0cfd4 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h @@ -40,6 +40,8 @@ #include #include + #include "Config/AppConfig.h" + #include "EthernetProtocols.h" #include "ProtocolDecoders.h" #include "ICMP.h" diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h index 6a91586a7..155544cc0 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h @@ -50,8 +50,8 @@ #include "Lib/TCP.h" #include "Lib/ARP.h" #include "Lib/Webserver.h" - - #include + #include "Config/AppConfig.h" + #include #include #include diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h index a62b468e2..311f5090b 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h index 990f28187..1e6971d9b 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h index b1a8bc15e..95cecca5c 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/AndroidAccessoryHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h index b7e1f5ad2..f3424bdc9 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h +++ b/Demos/Host/ClassDriver/AudioInputHost/AudioInputHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h index fa4801bfb..4c0d39fb8 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/ClassDriver/AudioOutputHost/AudioOutputHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h index 7ee25ec29..08047b00e 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h index 8920ff882..730b49c86 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h index 2ad4171bd..20b6356e1 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h index 3607f016b..907335f93 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h index 991cb77d9..28791a2b5 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h @@ -45,7 +45,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.h b/Demos/Host/ClassDriver/MouseHost/MouseHost.h index f8e8cf53d..f3efe7f2e 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.h +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h index 416d17dd7..fd7f0a7c7 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h index 13650cd7f..e450aa163 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h index f0ef90331..e91b70c73 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h index c70a0c73f..61de790b0 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h index 5592db252..571c5bdf7 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h b/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h index c699e2516..454e389f1 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/AndroidAccessoryHost.h @@ -48,7 +48,6 @@ #include "ConfigDescriptor.h" #include "Lib/AndroidAccessoryCommands.h" - #include #include #include #include diff --git a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h index 4568ddd57..10b9d8bbb 100644 --- a/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h +++ b/Demos/Host/LowLevel/AudioInputHost/AudioInputHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h index 2c475821c..189abcfd3 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h +++ b/Demos/Host/LowLevel/AudioOutputHost/AudioOutputHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h index 0c4f06766..0292ea459 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/AudioOutputHost/ConfigDescriptor.h @@ -40,7 +40,8 @@ #include #include "AudioOutputHost.h" - + #include "Config/AppConfig.h" + /* Macros: */ /** Pipe address for the Audio data OUT pipe. */ #define AUDIO_DATA_OUT_PIPE (PIPE_DIR_OUT | 1) diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h index 3e9d9fa5a..22dd516dd 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h index 8fc539e9a..89a073c5f 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h index 68d4bed6d..e0b326849 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h index 680bc47ab..547bd8577 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -39,7 +39,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.h b/Demos/Host/LowLevel/MIDIHost/MIDIHost.h index 780e61552..93a6869d3 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.h +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h index 45baa5588..db15af6a2 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h @@ -50,7 +50,6 @@ #include "Lib/MassStoreCommands.h" - #include #include #include #include diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.h b/Demos/Host/LowLevel/MouseHost/MouseHost.h index 9c5d87c7a..d50105648 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.h +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h index 0c05efcc6..ca18449d1 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.h b/Demos/Host/LowLevel/PrinterHost/PrinterHost.h index dcb826dda..581edd75e 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.h +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.h @@ -48,7 +48,6 @@ #include "ConfigDescriptor.h" #include "Lib/PrinterCommands.h" - #include #include #include #include diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h index a1dc414cd..1a15f9a9b 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h index c9395102b..75cee27cb 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h @@ -44,7 +44,6 @@ #include #include - #include #include #include #include diff --git a/LUFA.pnproj b/LUFA.pnproj index 520063da5..afe7a9b94 100644 --- a/LUFA.pnproj +++ b/LUFA.pnproj @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h index e7b418418..86e30d6c8 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.h +++ b/Projects/AVRISP-MKII/AVRISP-MKII.h @@ -42,7 +42,6 @@ #include #include - #include #include #include diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h index 25d9720cf..4c0ea8245 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h @@ -44,7 +44,8 @@ #include #include - #include "../V2ProtocolParams.h" + #include "../V2Protocol.h" + #include "ISPProtocol.h" #include "Config/AppConfig.h" /* Preprocessor Checks: */ diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.h b/Projects/AVRISP-MKII/Lib/V2Protocol.h index 0032dec6d..35cd13928 100644 --- a/Projects/AVRISP-MKII/Lib/V2Protocol.h +++ b/Projects/AVRISP-MKII/Lib/V2Protocol.h @@ -46,7 +46,7 @@ #include "../Descriptors.h" #include "V2ProtocolConstants.h" #include "V2ProtocolParams.h" - #include "ISP/ISPProtocol.h" +// #include "ISP/ISPProtocol.h" #include "XPROG/XPROGProtocol.h" #include "Config/AppConfig.h" diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h index 55cb64dd9..53cad8ded 100644 --- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h +++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h @@ -40,8 +40,6 @@ #include #include - #include - #if defined(ADC) #include #endif diff --git a/Projects/Benito/Benito.h b/Projects/Benito/Benito.h index 184c17385..8585fc4ad 100644 --- a/Projects/Benito/Benito.h +++ b/Projects/Benito/Benito.h @@ -44,7 +44,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Projects/HIDReportViewer/HIDReportViewer.h b/Projects/HIDReportViewer/HIDReportViewer.h index 64f5843ad..79440b2a2 100644 --- a/Projects/HIDReportViewer/HIDReportViewer.h +++ b/Projects/HIDReportViewer/HIDReportViewer.h @@ -45,7 +45,6 @@ #include #include - #include #include #include #include diff --git a/Projects/LEDNotifier/LEDNotifier.h b/Projects/LEDNotifier/LEDNotifier.h index 8e7249150..8b7754148 100644 --- a/Projects/LEDNotifier/LEDNotifier.h +++ b/Projects/LEDNotifier/LEDNotifier.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include #include #include diff --git a/Projects/MIDIToneGenerator/Descriptors.h b/Projects/MIDIToneGenerator/Descriptors.h index 83844449d..549eeb54e 100644 --- a/Projects/MIDIToneGenerator/Descriptors.h +++ b/Projects/MIDIToneGenerator/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ #define MIDI_STREAM_IN_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/MIDIToneGenerator/MIDIToneGenerator.h b/Projects/MIDIToneGenerator/MIDIToneGenerator.h index db11d5e0d..9ebd828c8 100644 --- a/Projects/MIDIToneGenerator/MIDIToneGenerator.h +++ b/Projects/MIDIToneGenerator/MIDIToneGenerator.h @@ -47,7 +47,6 @@ #include "Descriptors.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Projects/Magstripe/Magstripe.h b/Projects/Magstripe/Magstripe.h index c7e9d0525..2e2f63a72 100644 --- a/Projects/Magstripe/Magstripe.h +++ b/Projects/Magstripe/Magstripe.h @@ -48,7 +48,6 @@ #include "Lib/CircularBitBuffer.h" #include "Config/AppConfig.h" - #include #include /* Macros: */ diff --git a/Projects/MediaController/MediaController.h b/Projects/MediaController/MediaController.h index aeb91e77a..fcfa78072 100644 --- a/Projects/MediaController/MediaController.h +++ b/Projects/MediaController/MediaController.h @@ -46,7 +46,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Projects/MissileLauncher/MissileLauncher.h b/Projects/MissileLauncher/MissileLauncher.h index 49036d394..c333f0f75 100644 --- a/Projects/MissileLauncher/MissileLauncher.h +++ b/Projects/MissileLauncher/MissileLauncher.h @@ -45,7 +45,6 @@ #include #include - #include #include #include #include diff --git a/Projects/RelayBoard/RelayBoard.h b/Projects/RelayBoard/RelayBoard.h index 709c009c2..40f570646 100644 --- a/Projects/RelayBoard/RelayBoard.h +++ b/Projects/RelayBoard/RelayBoard.h @@ -45,7 +45,6 @@ #include "Descriptors.h" - #include #include #include diff --git a/Projects/SerialToLCD/SerialToLCD.h b/Projects/SerialToLCD/SerialToLCD.h index 52efe4401..cd893058e 100644 --- a/Projects/SerialToLCD/SerialToLCD.h +++ b/Projects/SerialToLCD/SerialToLCD.h @@ -46,7 +46,6 @@ #include "Descriptors.h" #include "Lib/HD44780.h" - #include #include #include diff --git a/Projects/TempDataLogger/Descriptors.h b/Projects/TempDataLogger/Descriptors.h index 5f9814308..d48978c46 100644 --- a/Projects/TempDataLogger/Descriptors.h +++ b/Projects/TempDataLogger/Descriptors.h @@ -15,6 +15,7 @@ #include #include "TempDataLogger.h" + #include "Config/AppConfig.h" /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ diff --git a/Projects/TempDataLogger/TempDataLogger.h b/Projects/TempDataLogger/TempDataLogger.h index b9c45fc54..cf2123506 100644 --- a/Projects/TempDataLogger/TempDataLogger.h +++ b/Projects/TempDataLogger/TempDataLogger.h @@ -51,7 +51,6 @@ #include "Lib/DS1307.h" #include "Config/AppConfig.h" - #include #include #include #include diff --git a/Projects/USBtoSerial/USBtoSerial.h b/Projects/USBtoSerial/USBtoSerial.h index d094863e8..ee2bd2f29 100644 --- a/Projects/USBtoSerial/USBtoSerial.h +++ b/Projects/USBtoSerial/USBtoSerial.h @@ -44,7 +44,6 @@ #include "Descriptors.h" - #include #include #include #include diff --git a/Projects/Webserver/Descriptors.h b/Projects/Webserver/Descriptors.h index 591947c89..969f47b18 100644 --- a/Projects/Webserver/Descriptors.h +++ b/Projects/Webserver/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) diff --git a/Projects/Webserver/USBDeviceMode.h b/Projects/Webserver/USBDeviceMode.h index 617c26273..86b3e9196 100644 --- a/Projects/Webserver/USBDeviceMode.h +++ b/Projects/Webserver/USBDeviceMode.h @@ -40,10 +40,11 @@ #include #include "Webserver.h" - #include "Lib/uIPManagement.h" #include "Descriptors.h" + #include "Lib/uIPManagement.h" #include "Lib/SCSI.h" - + #include "Config/AppConfig.h" + /* External Variables: */ extern USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface_Device; diff --git a/Projects/Webserver/USBHostMode.h b/Projects/Webserver/USBHostMode.h index c9186589b..d084e0983 100644 --- a/Projects/Webserver/USBHostMode.h +++ b/Projects/Webserver/USBHostMode.h @@ -41,6 +41,7 @@ #include "Webserver.h" #include "Lib/uIPManagement.h" + #include "Config/AppConfig.h" /* External Variables: */ extern USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface_Host; diff --git a/Projects/Webserver/Webserver.h b/Projects/Webserver/Webserver.h index 199bc8ec9..8c4771164 100644 --- a/Projects/Webserver/Webserver.h +++ b/Projects/Webserver/Webserver.h @@ -43,7 +43,6 @@ #include #include - #include #include #include #include @@ -51,6 +50,7 @@ #include "USBDeviceMode.h" #include "USBHostMode.h" + #include "Config/AppConfig.h" /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ diff --git a/Projects/XPLAINBridge/AVRISPDescriptors.h b/Projects/XPLAINBridge/AVRISPDescriptors.h index c0eeedf70..b3541c82f 100644 --- a/Projects/XPLAINBridge/AVRISPDescriptors.h +++ b/Projects/XPLAINBridge/AVRISPDescriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ #if !defined(LIBUSB_DRIVER_COMPAT) || defined(__DOXYGEN__) /** Endpoint address of the AVRISP data OUT endpoint. */ diff --git a/Projects/XPLAINBridge/Lib/SoftUART.h b/Projects/XPLAINBridge/Lib/SoftUART.h index c30ad651e..e2492ce77 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.h +++ b/Projects/XPLAINBridge/Lib/SoftUART.h @@ -44,7 +44,8 @@ #include #include "../XPLAINBridge.h" - + #include "Config/AppConfig.h" + /* Macros: */ #define SRX PD0 #define SRXPIN PIND diff --git a/Projects/XPLAINBridge/USARTDescriptors.h b/Projects/XPLAINBridge/USARTDescriptors.h index 4bb771be9..cc8db29c9 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.h +++ b/Projects/XPLAINBridge/USARTDescriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/XPLAINBridge/XPLAINBridge.h b/Projects/XPLAINBridge/XPLAINBridge.h index 7bba40fef..688ac7bd6 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.h +++ b/Projects/XPLAINBridge/XPLAINBridge.h @@ -50,7 +50,6 @@ #include "Lib/SoftUART.h" #include "Config/AppConfig.h" - #include #include #include #include -- cgit v1.2.3 From 666088a38818e371cc8ad89360c960d86b311a49 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 15 May 2012 21:01:40 +0000 Subject: AppConfigHeaders: Fix branch validation error. --- Demos/Device/LowLevel/Mouse/Mouse.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Demos/Device/LowLevel/Mouse/Mouse.h b/Demos/Device/LowLevel/Mouse/Mouse.h index b304a61bc..94e74df82 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.h +++ b/Demos/Device/LowLevel/Mouse/Mouse.h @@ -45,8 +45,7 @@ #include #include "Descriptors.h" - #include "Config/AppConfig.h" - + #include #include #include -- cgit v1.2.3 From 28967ef2e8f32e77031eb645970d2fa1a843e255 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 20 May 2012 15:45:53 +0000 Subject: Add missing AppConfig.h includes to project Descriptors.h files. --- Projects/Benito/Descriptors.h | 2 ++ Projects/Magstripe/Descriptors.h | 2 ++ 2 files changed, 4 insertions(+) diff --git a/Projects/Benito/Descriptors.h b/Projects/Benito/Descriptors.h index e481793b0..a1df0b487 100644 --- a/Projects/Benito/Descriptors.h +++ b/Projects/Benito/Descriptors.h @@ -41,6 +41,8 @@ #include + #include "Config/AppConfig.h" + /* Macros: */ /** Endpoint address of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 2) diff --git a/Projects/Magstripe/Descriptors.h b/Projects/Magstripe/Descriptors.h index f90816a82..a03fa54df 100644 --- a/Projects/Magstripe/Descriptors.h +++ b/Projects/Magstripe/Descriptors.h @@ -42,6 +42,8 @@ #include + #include "Config/AppConfig.h" + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which -- cgit v1.2.3 From 1e42f7bd46fbef1e67f50741e4fe1a5ea3a70869 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sun, 27 May 2012 18:31:53 +0000 Subject: AppConfigHeaders: Add missing AppConfig.h file includes. --- Projects/TempDataLogger/Lib/DataflashManager.h | 1 + Projects/TempDataLogger/Lib/SCSI.h | 1 + 2 files changed, 2 insertions(+) diff --git a/Projects/TempDataLogger/Lib/DataflashManager.h b/Projects/TempDataLogger/Lib/DataflashManager.h index 5d598cad5..90236260c 100644 --- a/Projects/TempDataLogger/Lib/DataflashManager.h +++ b/Projects/TempDataLogger/Lib/DataflashManager.h @@ -41,6 +41,7 @@ #include "../TempDataLogger.h" #include "../Descriptors.h" + #include "Config/AppConfig.h" #include #include diff --git a/Projects/TempDataLogger/Lib/SCSI.h b/Projects/TempDataLogger/Lib/SCSI.h index bd16460eb..1bb5d7be5 100644 --- a/Projects/TempDataLogger/Lib/SCSI.h +++ b/Projects/TempDataLogger/Lib/SCSI.h @@ -45,6 +45,7 @@ #include "../TempDataLogger.h" #include "../Descriptors.h" #include "DataflashManager.h" + #include "Config/AppConfig.h" /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This -- cgit v1.2.3