From 5a4def747897c1c6ffbe465506d846c7c686d3e9 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 13 Oct 2010 14:05:35 +0000 Subject: Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda --- Bootloaders/CDC/BootloaderCDC.c | 127 +++++++++++++++++++------------------- Bootloaders/CDC/BootloaderCDC.h | 23 +++---- Bootloaders/CDC/BootloaderCDC.txt | 13 ++-- Bootloaders/CDC/Descriptors.c | 89 +++++++++++++------------- Bootloaders/CDC/Descriptors.h | 17 ++--- Bootloaders/CDC/makefile | 49 ++++++++------- 6 files changed, 162 insertions(+), 156 deletions(-) (limited to 'Bootloaders/CDC') diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c index 234b5ce88..38f78daf3 100644 --- a/Bootloaders/CDC/BootloaderCDC.c +++ b/Bootloaders/CDC/BootloaderCDC.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Main source file for the CDC class bootloader. This file contains the complete bootloader logic. */ - + #define INCLUDE_FROM_BOOTLOADERCDC_C #include "BootloaderCDC.h" @@ -57,7 +57,7 @@ uint32_t CurrAddress; bool RunBootloader = true; -/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously +/** Main program entry point. This routine configures the hardware required by the bootloader, then continuously * runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start * the loaded application code. */ @@ -74,7 +74,7 @@ int main(void) CDC_Task(); USB_USBTask(); } - + /* Disconnect from the host - USB interface will be reset later along with the AVR */ USB_Detach(); @@ -93,11 +93,11 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Relocate the interrupt vector table to the bootloader section */ MCUCR = (1 << IVCE); MCUCR = (1 << IVSEL); - + /* Initialize USB Subsystem */ USB_Init(); } @@ -132,14 +132,14 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { case REQ_GetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { + { Endpoint_ClearSETUP(); /* Write the line coding data to the control endpoint */ Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); Endpoint_ClearOUT(); } - + break; case REQ_SetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -150,7 +150,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); Endpoint_ClearIN(); } - + break; } } @@ -164,20 +164,20 @@ static void ReadWriteMemoryBlock(const uint8_t Command) { uint16_t BlockSize; char MemoryType; - + bool HighByte = false; uint8_t LowByte = 0; - + BlockSize = (FetchNextCommandByte() << 8); BlockSize |= FetchNextCommandByte(); - + MemoryType = FetchNextCommandByte(); if ((MemoryType != 'E') && (MemoryType != 'F')) { /* Send error byte back to the host */ WriteNextResponseByte('?'); - + return; } @@ -195,13 +195,13 @@ static void ReadWriteMemoryBlock(const uint8_t Command) #if (FLASHEND > 0xFFFF) WriteNextResponseByte(pgm_read_byte_far(CurrAddress | HighByte)); #else - WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte)); + WriteNextResponseByte(pgm_read_byte(CurrAddress | HighByte)); #endif - + /* If both bytes in current word have been read, increment the address counter */ if (HighByte) CurrAddress += 2; - + HighByte = !HighByte; } else @@ -211,7 +211,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command) /* Increment the address counter after use */ CurrAddress += 2; - } + } } } else @@ -223,11 +223,11 @@ static void ReadWriteMemoryBlock(const uint8_t Command) boot_page_erase(PageStartAddress); boot_spm_busy_wait(); } - + while (BlockSize--) { if (MemoryType == 'F') - { + { /* If both bytes in current word have been written, increment the address counter */ if (HighByte) { @@ -242,14 +242,14 @@ static void ReadWriteMemoryBlock(const uint8_t Command) else { LowByte = FetchNextCommandByte(); - + HighByte = true; } } else { /* Write the next EEPROM byte from the endpoint */ - eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); + eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); /* Increment the address counter after use */ CurrAddress += 2; @@ -261,13 +261,13 @@ static void ReadWriteMemoryBlock(const uint8_t Command) { /* Commit the flash page to memory */ boot_page_write(PageStartAddress); - + /* Wait until write operation has completed */ boot_spm_busy_wait(); } - + /* Send response byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } } @@ -280,7 +280,7 @@ static uint8_t FetchNextCommandByte(void) { /* Select the OUT endpoint so that the next data byte can be read */ Endpoint_SelectEndpoint(CDC_RX_EPNUM); - + /* If OUT endpoint empty, clear it and wait for the next packet from the host */ while (!(Endpoint_IsReadWriteAllowed())) { @@ -292,7 +292,7 @@ static uint8_t FetchNextCommandByte(void) return 0; } } - + /* Fetch the next byte from the OUT endpoint */ return Endpoint_Read_Byte(); } @@ -306,19 +306,19 @@ static void WriteNextResponseByte(const uint8_t Response) { /* Select the IN endpoint so that the next data byte can be written */ Endpoint_SelectEndpoint(CDC_TX_EPNUM); - + /* If IN endpoint full, clear it and wait until ready for the next packet to the host */ if (!(Endpoint_IsReadWriteAllowed())) { Endpoint_ClearIN(); - + while (!(Endpoint_IsINReady())) { if (USB_DeviceState == DEVICE_STATE_Unattached) return; } } - + /* Write the next byte to the OUT endpoint */ Endpoint_Write_Byte(Response); } @@ -330,7 +330,7 @@ void CDC_Task(void) { /* Select the OUT endpoint */ Endpoint_SelectEndpoint(CDC_RX_EPNUM); - + /* Check if endpoint has a command in it sent from the host */ if (Endpoint_IsOUTReceived()) { @@ -345,7 +345,7 @@ void CDC_Task(void) FetchNextCommandByte(); /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if (Command == 't') { @@ -370,13 +370,13 @@ void CDC_Task(void) else if (Command == 'p') { /* Indicate serial programmer back to the host */ - WriteNextResponseByte('S'); + WriteNextResponseByte('S'); } else if (Command == 'S') { /* Write the 7-byte software identifier to the endpoint */ for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++) - WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]); + WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]); } else if (Command == 'V') { @@ -385,17 +385,17 @@ void CDC_Task(void) } else if (Command == 's') { - WriteNextResponseByte(AVR_SIGNATURE_3); + WriteNextResponseByte(AVR_SIGNATURE_3); WriteNextResponseByte(AVR_SIGNATURE_2); WriteNextResponseByte(AVR_SIGNATURE_1); } else if (Command == 'b') { WriteNextResponseByte('Y'); - + /* Send block size to the host */ WriteNextResponseByte(SPM_PAGESIZE >> 8); - WriteNextResponseByte(SPM_PAGESIZE & 0xFF); + WriteNextResponseByte(SPM_PAGESIZE & 0xFF); } else if (Command == 'e') { @@ -409,9 +409,9 @@ void CDC_Task(void) CurrFlashAddress += SPM_PAGESIZE; } - + /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if (Command == 'l') { @@ -423,7 +423,7 @@ void CDC_Task(void) } else if (Command == 'r') { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS)); + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS)); } else if (Command == 'F') { @@ -431,41 +431,41 @@ void CDC_Task(void) } else if (Command == 'N') { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS)); + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS)); } else if (Command == 'Q') { - WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS)); + WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS)); } else if (Command == 'C') - { + { /* Write the high byte to the current flash page */ boot_page_fill(CurrAddress, FetchNextCommandByte()); /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if (Command == 'c') - { + { /* Write the low byte to the current flash page */ boot_page_fill(CurrAddress | 1, FetchNextCommandByte()); - + /* Increment the address */ CurrAddress += 2; /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if (Command == 'm') { /* Commit the flash page to memory */ boot_page_write(CurrAddress); - + /* Wait until write operation has completed */ boot_spm_busy_wait(); /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if ((Command == 'B') || (Command == 'g')) { @@ -477,9 +477,9 @@ void CDC_Task(void) #if (FLASHEND > 0xFFFF) uint16_t ProgramWord = pgm_read_word_far(CurrAddress); #else - uint16_t ProgramWord = pgm_read_word(CurrAddress); + uint16_t ProgramWord = pgm_read_word(CurrAddress); #endif - + WriteNextResponseByte(ProgramWord >> 8); WriteNextResponseByte(ProgramWord & 0xFF); } @@ -487,12 +487,12 @@ void CDC_Task(void) { /* Read the byte from the endpoint and write it to the EEPROM */ eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte()); - - /* Increment the address after use */ + + /* Increment the address after use */ CurrAddress += 2; - + /* Send confirmation byte back to the host */ - WriteNextResponseByte('\r'); + WriteNextResponseByte('\r'); } else if (Command == 'd') { @@ -520,12 +520,12 @@ void CDC_Task(void) /* Send the endpoint data to the host */ Endpoint_ClearIN(); - + /* If a full endpoint's worth of data was sent, we need to send an empty packet afterwards to signal end of transfer */ if (IsEndpointFull) { while (!(Endpoint_IsINReady())) - { + { if (USB_DeviceState == DEVICE_STATE_Unattached) return; } @@ -535,11 +535,11 @@ void CDC_Task(void) /* Wait until the data has been sent to the host */ while (!(Endpoint_IsINReady())) - { + { if (USB_DeviceState == DEVICE_STATE_Unattached) return; } - + /* Select the OUT endpoint */ Endpoint_SelectEndpoint(CDC_RX_EPNUM); @@ -547,3 +547,4 @@ void CDC_Task(void) Endpoint_ClearOUT(); } } + diff --git a/Bootloaders/CDC/BootloaderCDC.h b/Bootloaders/CDC/BootloaderCDC.h index 98154c2b9..492fbdd92 100644 --- a/Bootloaders/CDC/BootloaderCDC.h +++ b/Bootloaders/CDC/BootloaderCDC.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for BootloaderCDC.c. */ - + #ifndef _CDC_H_ #define _CDC_H_ @@ -55,7 +55,7 @@ /** Version minor of the CDC bootloader. */ #define BOOTLOADER_VERSION_MINOR 0x00 - + /** Hardware version major of the CDC bootloader. */ #define BOOTLOADER_HWVERSION_MAJOR 0x01 @@ -64,7 +64,7 @@ /** Eight character bootloader firmware identifier reported to the host when requested */ #define SOFTWARE_IDENTIFIER "LUFACDC" - + /** CDC Class specific request to get the current virtual serial port configuration settings. */ #define REQ_GetLineEncoding 0x21 @@ -89,7 +89,7 @@ /** Type define for a non-returning pointer to the start of the loaded application in flash memory. */ typedef void (*AppPtr_t)(void) ATTR_NO_RETURN; - + /* Enums: */ /** Enum for the possible line encoding formats of a virtual serial port. */ enum CDCDevice_CDC_LineCodingFormats_t @@ -98,7 +98,7 @@ OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */ TwoStopBits = 2, /**< Each frame contains two stop bits */ }; - + /** Enum for the possible line encoding parity settings of a virtual serial port. */ enum CDCDevice_LineCodingParity_t { @@ -122,3 +122,4 @@ #endif #endif + diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index f4208ee4c..ae1da0804 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage CDC Class USB AVR Bootloader * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * USB Class: * Communications Device Class (CDC) * - * + * * USB Subclass: * Abstract Control Model (ACM) * @@ -42,15 +42,15 @@ * * * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 - * protocol compatible programming software to load firmware onto the AVR. - * + * protocol compatible programming software to load firmware onto the AVR. + * * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU * values in the accompanying makefile. - * + * * This bootloader is compatible with the open source application AVRDUDE, or Atmel's AVRPROG. * * After running this bootloader for the first time on a new computer, you will need to supply the .INF @@ -70,3 +70,4 @@ * * */ + diff --git a/Bootloaders/CDC/Descriptors.c b/Bootloaders/CDC/Descriptors.c index ae9a986a6..ae04fbd67 100644 --- a/Bootloaders/CDC/Descriptors.c +++ b/Bootloaders/CDC/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -45,22 +45,22 @@ USB_Descriptor_Device_t DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x02, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204A, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = NO_DESCRIPTOR, .ProductStrIndex = 0x01, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,102 +71,102 @@ USB_Descriptor_Device_t DeviceDescriptor = */ USB_Descriptor_Configuration_t ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = 0x00, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = 0x02, - + .Capabilities = 0x04, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = 0x06, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0x02 }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t ConfigurationDescriptor = USB_Descriptor_String_t LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -192,7 +192,7 @@ USB_Descriptor_String_t LanguageString = USB_Descriptor_String_t ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"AVR CDC Bootloader" }; @@ -233,10 +233,11 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &ProductString; Size = ProductString.Header.Size; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Bootloaders/CDC/Descriptors.h b/Bootloaders/CDC/Descriptors.h index 15941338b..9af079b9c 100644 --- a/Bootloaders/CDC/Descriptors.h +++ b/Bootloaders/CDC/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -96,7 +96,7 @@ #define CDC_NOTIFICATION_EPNUM 2 /** Endpoint number for the CDC data interface TX (data IN) endpoint. */ - #define CDC_TX_EPNUM 3 + #define CDC_TX_EPNUM 3 /** Endpoint number for the CDC data interface RX (data OUT) endpoint. */ #define CDC_RX_EPNUM 4 @@ -130,7 +130,7 @@ uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */ uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */ } USB_Descriptor_CDC_FunctionalACM_t; - + /** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific * CDC control and data interfaces are related. See the CDC class specification for more details. */ @@ -166,3 +166,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index c23424b9f..305c732b9 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -35,7 +35,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -52,14 +52,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -72,7 +72,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -136,7 +136,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -149,7 +149,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -266,7 +266,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -279,7 +279,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -291,7 +291,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -303,7 +303,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -327,7 +327,7 @@ EXTMEMOPTS = # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref LDFLAGS += -Wl,--section-start=.text=$(BOOT_START) -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -361,7 +361,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See +# reports about avrdude. See # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -395,7 +395,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -424,7 +424,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -443,10 +443,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -511,19 +511,19 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -621,14 +621,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -650,7 +650,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -693,3 +693,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) .PHONY : all begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program debug gdb-config + -- cgit v1.2.3