From cd0bd7bf90e7e64a42b1efcee5a60cfdfc91d7a2 Mon Sep 17 00:00:00 2001
From: Dean Camera <dean@fourwalledcubicle.com>
Date: Sat, 9 Jun 2012 13:00:56 +0000
Subject: Added new JTAG_ENABLE() macro for the AVR8 architecture. Fixed the
 JTAG_DISABLE() macro clearing all other bits in MCUSR when called.

Moved the XPLAIN board specific bootloader entry condition code to the Application_Jump_Check() function of the DFU bootloader, added support for the original XPLAIN board to the CDC class bootloader.
---
 Bootloaders/DFU/BootloaderDFU.c | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

(limited to 'Bootloaders/DFU')

diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c
index f5c8d170e..64850e3bb 100644
--- a/Bootloaders/DFU/BootloaderDFU.c
+++ b/Bootloaders/DFU/BootloaderDFU.c
@@ -106,8 +106,29 @@ uint32_t MagicBootKey ATTR_NO_INIT;
  */
 void Application_Jump_Check(void)
 {
+	bool JumpToApplication = false;
+
+	#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
+		/* Disable JTAG debugging */
+		JTAG_DISABLE();
+
+		/* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
+		PORTF |= (1 << 4);
+		Delay_MS(10);
+
+		/* If the TCK pin is not jumpered to ground, start the user application instead */
+		JumpToApplication |= ((PINF & (1 << 4)) != 0);
+
+		/* Re-enable JTAG debugging */
+		JTAG_ENABLE();
+	#endif
+
 	/* If the reset source was the bootloader and the key is correct, clear it and jump to the application */
 	if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
+	  JumpToApplication |= true;
+
+	/* If a request has been made to jump to the user application, honor it */
+	if (JumpToApplication)
 	{
 		/* Turn off the watchdog */
 		MCUSR &= ~(1<<WDRF);
@@ -130,23 +151,6 @@ int main(void)
 	/* Configure hardware required by the bootloader */
 	SetupHardware();
 
-	#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
-	/* Disable JTAG debugging */
-	MCUCR |= (1 << JTD);
-	MCUCR |= (1 << JTD);
-
-	/* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
-	PORTF |= (1 << 4);
-	Delay_MS(10);
-
-	/* If the TCK pin is not jumpered to ground, start the user application instead */
-	RunBootloader = (!(PINF & (1 << 4)));
-
-	/* Re-enable JTAG debugging */
-	MCUCR &= ~(1 << JTD);
-	MCUCR &= ~(1 << JTD);
-	#endif
-
 	/* Turn on first LED on the board to indicate that the bootloader has started */
 	LEDs_SetAllLEDs(LEDS_LED1);
 
-- 
cgit v1.2.3