From 57ef7a79b47de41f907f8b704c95b7efaea76847 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 21 Apr 2014 22:38:20 +1000 Subject: Upgrade to latest Doxygen. --- Demos/Device/ClassDriver/AudioInput/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/AudioOutput/doxyfile | 61 ++++++++++++---------- .../Device/ClassDriver/DualVirtualSerial/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/GenericHID/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/Joystick/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/Keyboard/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/KeyboardMouse/doxyfile | 61 ++++++++++++---------- .../ClassDriver/KeyboardMouseMultiReport/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/MIDI/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/MassStorage/doxyfile | 61 ++++++++++++---------- .../ClassDriver/MassStorageKeyboard/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/Mouse/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/RNDISEthernet/doxyfile | 61 ++++++++++++---------- Demos/Device/ClassDriver/VirtualSerial/doxyfile | 61 ++++++++++++---------- .../ClassDriver/VirtualSerialMassStorage/doxyfile | 61 ++++++++++++---------- .../Device/ClassDriver/VirtualSerialMouse/doxyfile | 61 ++++++++++++---------- 16 files changed, 544 insertions(+), 432 deletions(-) (limited to 'Demos/Device/ClassDriver') diff --git a/Demos/Device/ClassDriver/AudioInput/doxyfile b/Demos/Device/ClassDriver/AudioInput/doxyfile index 38bb3b014..8268ae315 100644 --- a/Demos/Device/ClassDriver/AudioInput/doxyfile +++ b/Demos/Device/ClassDriver/AudioInput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/AudioOutput/doxyfile b/Demos/Device/ClassDriver/AudioOutput/doxyfile index 824854c9f..ec4eea7e2 100644 --- a/Demos/Device/ClassDriver/AudioOutput/doxyfile +++ b/Demos/Device/ClassDriver/AudioOutput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile b/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile index cb89def67..e9a373e31 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/GenericHID/doxyfile b/Demos/Device/ClassDriver/GenericHID/doxyfile index a69a18148..350ea9751 100644 --- a/Demos/Device/ClassDriver/GenericHID/doxyfile +++ b/Demos/Device/ClassDriver/GenericHID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -982,7 +993,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1263,7 +1274,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1503,11 +1515,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1795,6 +1807,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1822,18 +1841,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1981,9 +1988,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2003,7 +2010,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/Joystick/doxyfile b/Demos/Device/ClassDriver/Joystick/doxyfile index 40e5b2758..571298a14 100644 --- a/Demos/Device/ClassDriver/Joystick/doxyfile +++ b/Demos/Device/ClassDriver/Joystick/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/Keyboard/doxyfile b/Demos/Device/ClassDriver/Keyboard/doxyfile index 460c00752..ab5ae9a30 100644 --- a/Demos/Device/ClassDriver/Keyboard/doxyfile +++ b/Demos/Device/ClassDriver/Keyboard/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/doxyfile b/Demos/Device/ClassDriver/KeyboardMouse/doxyfile index 0fcff0c30..4c6435708 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/doxyfile +++ b/Demos/Device/ClassDriver/KeyboardMouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile index fabc00912..1777b3d0b 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/MIDI/doxyfile b/Demos/Device/ClassDriver/MIDI/doxyfile index 3f89a0b87..fdeb88023 100644 --- a/Demos/Device/ClassDriver/MIDI/doxyfile +++ b/Demos/Device/ClassDriver/MIDI/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/MassStorage/doxyfile b/Demos/Device/ClassDriver/MassStorage/doxyfile index abb3618e8..fb34d568d 100644 --- a/Demos/Device/ClassDriver/MassStorage/doxyfile +++ b/Demos/Device/ClassDriver/MassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile b/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile index f8759cbef..5df940183 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/Mouse/doxyfile b/Demos/Device/ClassDriver/Mouse/doxyfile index a16ceb48c..a6b0ddb95 100644 --- a/Demos/Device/ClassDriver/Mouse/doxyfile +++ b/Demos/Device/ClassDriver/Mouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/doxyfile b/Demos/Device/ClassDriver/RNDISEthernet/doxyfile index d62da5031..e4a97aa2a 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/doxyfile +++ b/Demos/Device/ClassDriver/RNDISEthernet/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/VirtualSerial/doxyfile b/Demos/Device/ClassDriver/VirtualSerial/doxyfile index a4e76b5ed..b347849b6 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile index 8c078ca02..da22fd93c 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile b/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile index c3ca3f846..d0ad91347 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.7 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = ./Documentation/ CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -271,9 +279,12 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # # Note For files without extension you can use no_extension as a placeholder. # @@ -981,7 +992,7 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the -# clang parser (see: http://clang.llvm.org/) for more acurate parsing at the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the # cost of reduced performance. This can be particularly helpful with template # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. @@ -1262,7 +1273,8 @@ GENERATE_CHI = NO CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1502,11 +1514,11 @@ SEARCHENGINE = NO # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1794,6 +1806,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1821,18 +1840,6 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size @@ -1980,9 +1987,9 @@ PREDEFINED = __DOXYGEN__ \ EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -2002,7 +2009,7 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. -- cgit v1.2.3