From 34f6e0dd33230441b8a91130467b3164e343853e Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 9 Jun 2009 04:27:53 +0000 Subject: Deleted Host ClassDriver demos -- not yet started, faster to rebase new ClassDriver demos from the newly schedulerless LowLevel host demos rather than re-convert each demo from the previous scheduler-based implementations. Fixes to MassStorageHost demo to improve compatibility with more USB drives. --- Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c | 335 --------------------- 1 file changed, 335 deletions(-) delete mode 100644 Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c (limited to 'Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c') diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c deleted file mode 100644 index 2b9bb2b0b..000000000 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2009. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, and distribute this software - and its documentation for any purpose and without fee is hereby - granted, provided that the above copyright notice appear in all - copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Main source file for the KeyboardHost demo. This file contains the main tasks of - * the demo and is responsible for the initial application hardware configuration. - */ - -#include "KeyboardHost.h" - -/* Scheduler Task List */ -TASK_LIST -{ - { .Task = USB_USBTask , .TaskStatus = TASK_STOP }, - { .Task = USB_Keyboard_Host , .TaskStatus = TASK_STOP }, -}; - - -/** Main program entry point. This routine configures the hardware required by the application, then - * starts the scheduler to run the application tasks. - */ -int main(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - /* Hardware Initialization */ - SerialStream_Init(9600, false); - LEDs_Init(); - - /* Indicate USB not ready */ - UpdateStatus(Status_USBNotReady); - - /* Initialize Scheduler so that it can be used */ - Scheduler_Init(); - - /* Initialize USB Subsystem */ - USB_Init(); - - /* Start-up message */ - puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY - "Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF)); - - /* Scheduling - routine never returns, so put this last in the main function */ - Scheduler_Start(); -} - -/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and - * starts the library USB task to begin the enumeration and USB management process. - */ -void EVENT_USB_DeviceAttached(void) -{ - puts_P(PSTR("Device Attached.\r\n")); - UpdateStatus(Status_USBEnumerating); - - /* Start USB management task to enumerate the device */ - Scheduler_SetTaskMode(USB_USBTask, TASK_RUN); -} - -/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and - * stops the library USB task management process. - */ -void EVENT_USB_DeviceUnattached(void) -{ - /* Stop Keyboard and USB management task */ - Scheduler_SetTaskMode(USB_USBTask, TASK_STOP); - Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_STOP); - - puts_P(PSTR("Device Unattached.\r\n")); - UpdateStatus(Status_USBNotReady); -} - -/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully - * enumerated by the host and is now ready to be used by the application. - */ -void EVENT_USB_DeviceEnumerationComplete(void) -{ - /* Start Keyboard Host task */ - Scheduler_SetTaskMode(USB_Keyboard_Host, TASK_RUN); - - /* Indicate device enumeration complete */ - UpdateStatus(Status_USBReady); -} - -/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */ -void EVENT_USB_HostError(const uint8_t ErrorCode) -{ - USB_ShutDown(); - - puts_P(PSTR(ESC_BG_RED "Host Mode Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); - - UpdateStatus(Status_HardwareError); - for(;;); -} - -/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while - * enumerating an attached USB device. - */ -void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode) -{ - puts_P(PSTR(ESC_BG_RED "Dev Enum Error\r\n")); - printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode); - printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode); - printf_P(PSTR(" -- In State %d\r\n"), USB_HostState); - - UpdateStatus(Status_EnumerationError); -} - -/** Function to manage status updates to the user. This is done via LEDs on the given board, if available, but may be changed to - * log to a serial port, or anything else that is suitable for status updates. - * - * \param CurrentStatus Current status of the system, from the KeyboardHost_StatusCodes_t enum - */ -void UpdateStatus(uint8_t CurrentStatus) -{ - uint8_t LEDMask = LEDS_NO_LEDS; - - /* Set the LED mask to the appropriate LED mask based on the given status code */ - switch (CurrentStatus) - { - case Status_USBNotReady: - LEDMask = (LEDS_LED1); - break; - case Status_USBEnumerating: - LEDMask = (LEDS_LED1 | LEDS_LED2); - break; - case Status_USBReady: - LEDMask = (LEDS_LED2); - break; - case Status_EnumerationError: - case Status_HardwareError: - LEDMask = (LEDS_LED1 | LEDS_LED3); - break; - } - - /* Set the board LEDs to the new LED mask */ - LEDs_SetAllLEDs(LEDMask); -} - -/** Reads in and processes the next report from the attached device, displaying the report - * contents on the board LEDs and via the serial port. - */ -void ReadNextReport(void) -{ - USB_KeyboardReport_Data_t KeyboardReport; - - /* Select keyboard data pipe */ - Pipe_SelectPipe(KEYBOARD_DATAPIPE); - - /* Unfreeze keyboard data pipe */ - Pipe_Unfreeze(); - - /* Check to see if a packet has been received */ - if (!(Pipe_IsINReceived())) - { - /* Refreeze HID data IN pipe */ - Pipe_Freeze(); - - return; - } - - /* Ensure pipe contains data before trying to read from it */ - if (Pipe_IsReadWriteAllowed()) - { - /* Read in keyboard report data */ - Pipe_Read_Stream_LE(&KeyboardReport, sizeof(KeyboardReport)); - - /* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */ - LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0); - - /* Check if a key has been pressed */ - if (KeyboardReport.KeyCode) - { - /* Toggle status LED to indicate keypress */ - if (LEDs_GetLEDs() & LEDS_LED2) - LEDs_TurnOffLEDs(LEDS_LED2); - else - LEDs_TurnOnLEDs(LEDS_LED2); - - char PressedKey = 0; - - /* Retrieve pressed key character if alphanumeric */ - if ((KeyboardReport.KeyCode >= 0x04) && (KeyboardReport.KeyCode <= 0x1D)) - PressedKey = (KeyboardReport.KeyCode - 0x04) + 'A'; - else if ((KeyboardReport.KeyCode >= 0x1E) && (KeyboardReport.KeyCode <= 0x27)) - PressedKey = (KeyboardReport.KeyCode - 0x1E) + '0'; - else if (KeyboardReport.KeyCode == 0x2C) - PressedKey = ' '; - else if (KeyboardReport.KeyCode == 0x28) - PressedKey = '\n'; - - /* Print the pressed key character out through the serial port if valid */ - if (PressedKey) - putchar(PressedKey); - } - } - - /* Clear the IN endpoint, ready for next data packet */ - Pipe_ClearIN(); - - /* Refreeze keyboard data pipe */ - Pipe_Freeze(); -} - -/** Task to set the configuration of the attached device after it has been enumerated, and to read and process - * HID reports from the device and display the results onto the board LEDs. - */ -TASK(USB_Keyboard_Host) -{ - uint8_t ErrorCode; - - switch (USB_HostState) - { - case HOST_STATE_Addressed: - /* Standard request to set the device configuration to configuration 1 */ - USB_ControlRequest = (USB_Request_Header_t) - { - .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE), - .bRequest = REQ_SetConfiguration, - .wValue = 1, - .wIndex = 0, - .wLength = 0, - }; - - /* Select the control pipe for the request transfer */ - Pipe_SelectPipe(PIPE_CONTROLPIPE); - - /* Send the request, display error and wait for device detach if request fails */ - if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) - { - puts_P(PSTR("Control Error (Set Configuration).\r\n")); - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error status */ - UpdateStatus(Status_EnumerationError); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - USB_HostState = HOST_STATE_Configured; - break; - case HOST_STATE_Configured: - puts_P(PSTR("Getting Config Data.\r\n")); - - /* Get and process the configuration descriptor data */ - if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) - { - if (ErrorCode == ControlError) - puts_P(PSTR("Control Error (Get Configuration).\r\n")); - else - puts_P(PSTR("Invalid Device.\r\n")); - - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error status */ - UpdateStatus(Status_EnumerationError); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - /* HID class request to set the keyboard protocol to the Boot Protocol */ - USB_ControlRequest = (USB_Request_Header_t) - { - .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE), - .bRequest = REQ_SetProtocol, - .wValue = 0, - .wIndex = 0, - .wLength = 0, - }; - - /* Select the control pipe for the request transfer */ - Pipe_SelectPipe(PIPE_CONTROLPIPE); - - /* Send the request, display error and wait for device detach if request fails */ - if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) - { - puts_P(PSTR("Control Error (Set Protocol).\r\n")); - printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - - /* Indicate error status */ - UpdateStatus(Status_EnumerationError); - - /* Wait until USB device disconnected */ - while (USB_IsConnected); - break; - } - - puts_P(PSTR("Keyboard Enumerated.\r\n")); - - USB_HostState = HOST_STATE_Ready; - break; - case HOST_STATE_Ready: - /* If a report has been received, read and process it */ - ReadNextReport(); - - break; - } -} -- cgit v1.2.3