From 4c25f212c38b4a0788f688c0e582a865d1d97fc1 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 26 Dec 2013 15:09:58 +1100 Subject: Upgrade Doxygen configuration files to the latest version. --- Demos/Device/ClassDriver/AudioInput/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/AudioOutput/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/DualVirtualSerial/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/GenericHID/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/Joystick/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/Keyboard/Doxygen.conf | 39 +++++++++++++++++----- .../Device/ClassDriver/KeyboardMouse/Doxygen.conf | 39 +++++++++++++++++----- .../KeyboardMouseMultiReport/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/MIDI/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/MassStorage/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/MassStorageKeyboard/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/ClassDriver/Mouse/Doxygen.conf | 39 +++++++++++++++++----- .../Device/ClassDriver/RNDISEthernet/Doxygen.conf | 39 +++++++++++++++++----- .../Device/ClassDriver/VirtualSerial/Doxygen.conf | 39 +++++++++++++++++----- .../VirtualSerialMassStorage/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/VirtualSerialMouse/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/AudioInput/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/AudioOutput/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/BulkVendor/Doxygen.conf | 39 +++++++++++++++++----- .../Device/LowLevel/DualVirtualSerial/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/GenericHID/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/Joystick/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/Keyboard/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/MIDI/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/MassStorage/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/Mouse/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf | 39 +++++++++++++++++----- Demos/Device/LowLevel/VirtualSerial/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/MouseHostDevice/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/AndroidAccessoryHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf | 39 +++++++++++++++++----- .../Host/ClassDriver/AudioOutputHost/Doxygen.conf | 39 +++++++++++++++++----- .../JoystickHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf | 39 +++++++++++++++++----- .../KeyboardHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/MIDIHost/Doxygen.conf | 39 +++++++++++++++++----- .../Host/ClassDriver/MassStorageHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/MouseHost/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/MouseHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/PrinterHost/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/RNDISEthernetHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/ClassDriver/StillImageHost/Doxygen.conf | 39 +++++++++++++++++----- .../ClassDriver/VirtualSerialHost/Doxygen.conf | 39 +++++++++++++++++----- .../LowLevel/AndroidAccessoryHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/AudioInputHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf | 39 +++++++++++++++++----- .../LowLevel/JoystickHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/KeyboardHost/Doxygen.conf | 39 +++++++++++++++++----- .../LowLevel/KeyboardHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/MIDIHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/MassStorageHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/MouseHost/Doxygen.conf | 39 +++++++++++++++++----- .../Host/LowLevel/MouseHostWithParser/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/PrinterHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/StillImageHost/Doxygen.conf | 39 +++++++++++++++++----- Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf | 39 +++++++++++++++++----- 59 files changed, 1829 insertions(+), 472 deletions(-) (limited to 'Demos') diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index 6faf6845a..38bb3b014 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index 22208126f..824854c9f 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index 7eb8175a1..cb89def67 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index f094a78b8..a69a18148 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2053,6 +2063,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2253,6 +2270,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index a80227fed..40e5b2758 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 40655f29a..460c00752 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index a2e11a246..0fcff0c30 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index 4af53df2f..fabc00912 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index 9ebc769eb..3f89a0b87 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index 4538567f5..abb3618e8 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index d49fbf06d..f8759cbef 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index b02596369..a16ceb48c 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index 6c076e884..d62da5031 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index 5f4fc608d..a4e76b5ed 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index 42b70fc71..8c078ca02 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index 0395eb329..c3ca3f846 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index 6faf6845a..38bb3b014 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index 22208126f..824854c9f 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/BulkVendor/Doxygen.conf b/Demos/Device/LowLevel/BulkVendor/Doxygen.conf index ab4cb1273..888e4ed8b 100644 --- a/Demos/Device/LowLevel/BulkVendor/Doxygen.conf +++ b/Demos/Device/LowLevel/BulkVendor/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2054,6 +2064,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2254,6 +2271,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index 7eb8175a1..cb89def67 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index f094a78b8..a69a18148 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2053,6 +2063,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2253,6 +2270,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index a80227fed..40e5b2758 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index 40655f29a..460c00752 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index a2e11a246..0fcff0c30 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index 9ebc769eb..3f89a0b87 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index 4538567f5..abb3618e8 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index b02596369..a16ceb48c 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index 6c076e884..d62da5031 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index 5f4fc608d..a4e76b5ed 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf index 0f680df65..3aeffe3fe 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf index cb37e6a41..10228c2f6 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf index 6d53cb60b..ddbbd2855 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf index 290bf4ed0..74d130c43 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf index d31561e1d..96c2b6769 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf index 35f95af76..8ab7024fa 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf index 3974e081b..af19e5633 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf index 179f936c8..5970e0098 100644 --- a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf index b0ca19ac5..88ff9a400 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf index 4a5a11cfa..939c7ee35 100644 --- a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf index c25803d02..b8e37e6bb 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf index a35d6a5d9..4c49a9146 100644 --- a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf index 1fc13598e..2431dd4db 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf index 0eac0d254..7cf90bbc6 100644 --- a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf index 872ca6b8b..dfe507d29 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf index cb37e6a41..10228c2f6 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index 6d53cb60b..ddbbd2855 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 290bf4ed0..74d130c43 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf index d99452c75..d087ba97d 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf +++ b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index d31561e1d..96c2b6769 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf index 35f95af76..8ab7024fa 100644 --- a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 3974e081b..af19e5633 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf index 179f936c8..5970e0098 100644 --- a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf index b0ca19ac5..88ff9a400 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/MouseHost/Doxygen.conf b/Demos/Host/LowLevel/MouseHost/Doxygen.conf index 4a5a11cfa..939c7ee35 100644 --- a/Demos/Host/LowLevel/MouseHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index c25803d02..b8e37e6bb 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf index a35d6a5d9..4c49a9146 100644 --- a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf +++ b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf index 69f71391b..c36515e44 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf index 0eac0d254..7cf90bbc6 100644 --- a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf index 872ca6b8b..dfe507d29 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.5 +# Doxyfile 1.8.6 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -73,12 +73,14 @@ CREATE_SUBDIRS = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. -# Possible values are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese- -# Traditional, Croatian, Czech, Danish, Dutch, English, Esperanto, Farsi, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en, -# Korean, Korean-en, Latvian, Norwegian, Macedonian, Persian, Polish, -# Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, -# Turkish, Ukrainian and Vietnamese. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. # The default value is: English. OUTPUT_LANGUAGE = English @@ -510,6 +512,13 @@ HIDE_SCOPE_NAMES = NO SHOW_INCLUDE_FILES = YES +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -531,7 +540,8 @@ SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. # The default value is: NO. SORT_BRIEF_DOCS = NO @@ -2052,6 +2062,13 @@ CLASS_DIAGRAMS = NO MSCGEN_PATH = +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + # If set to YES, the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2252,6 +2269,12 @@ DOTFILE_DIRS = MSCFILE_DIRS = +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes # larger than this value, doxygen will truncate the graph, which is visualized -- cgit v1.2.3