From 071e02c6b6b4837fa9cf0b6d4c749994e02638d7 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 8 May 2010 03:12:14 +0000 Subject: Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. --- LUFA/Drivers/Peripheral/SPI.h | 370 +++++++++++++++++++++--------------------- 1 file changed, 185 insertions(+), 185 deletions(-) (limited to 'LUFA/Drivers/Peripheral/SPI.h') diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h index 041c0788e..9e6475351 100644 --- a/LUFA/Drivers/Peripheral/SPI.h +++ b/LUFA/Drivers/Peripheral/SPI.h @@ -1,185 +1,185 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Master include file for the SPI peripheral driver. - * - * Hardware SPI subsystem driver for the supported USB AVRs models. - */ - -/** \ingroup Group_PeripheralDrivers - * @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h - * - * \section Sec_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - None - * - * \section Module Description - * Driver for the hardware SPI port available on most AVR models. This module provides - * an easy to use driver for the setup of and transfer of data over the AVR's SPI port. - * - * @{ - */ - -#ifndef __SPI_H__ -#define __SPI_H__ - - /* Includes: */ - #include - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* Macros: */ - #define SPI_USE_DOUBLESPEED (1 << SPE) - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 2. */ - #define SPI_SPEED_FCPU_DIV_2 SPI_USE_DOUBLESPEED - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 4. */ - #define SPI_SPEED_FCPU_DIV_4 0 - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 8. */ - #define SPI_SPEED_FCPU_DIV_8 (SPI_USE_DOUBLESPEED | (1 << SPR0)) - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 16. */ - #define SPI_SPEED_FCPU_DIV_16 (1 << SPR0) - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 32. */ - #define SPI_SPEED_FCPU_DIV_32 (SPI_USE_DOUBLESPEED | (1 << SPR1)) - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 64. */ - #define SPI_SPEED_FCPU_DIV_64 (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0)) - - /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */ - #define SPI_SPEED_FCPU_DIV_128 ((1 << SPR1) | (1 << SPR0)) - - /** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */ - #define SPI_SCK_LEAD_RISING (0 << CPOL) - - /** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */ - #define SPI_SCK_LEAD_FALLING (1 << CPOL) - - /** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */ - #define SPI_SAMPLE_LEADING (0 << CPHA) - - /** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */ - #define SPI_SAMPLE_TRAILING (1 << CPHA) - - /** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */ - #define SPI_MODE_SLAVE (0 << MSTR) - - /** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */ - #define SPI_MODE_MASTER (1 << MSTR) - - /* Inline Functions: */ - /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other - * SPI routines. - * - * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*, - * SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks - */ - static inline void SPI_Init(const uint8_t SPIOptions) - { - DDRB |= ((1 << 1) | (1 << 2)); - PORTB |= ((1 << 0) | (1 << 3)); - - SPCR = ((1 << SPE) | SPIOptions); - - if (SPIOptions & SPI_USE_DOUBLESPEED) - SPSR |= (1 << SPI2X); - else - SPSR &= ~(1 << SPI2X); - } - - /** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */ - static inline void SPI_ShutDown(void) - { - DDRB &= ~((1 << 1) | (1 << 2)); - PORTB &= ~((1 << 0) | (1 << 3)); - - SPCR = 0; - SPSR = 0; - } - - /** Sends and receives a byte through the SPI interface, blocking until the transfer is complete. - * - * \param[in] Byte Byte to send through the SPI interface - * - * \return Response byte from the attached SPI device - */ - static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline uint8_t SPI_TransferByte(const uint8_t Byte) - { - SPDR = Byte; - while (!(SPSR & (1 << SPIF))); - return SPDR; - } - - /** Sends a byte through the SPI interface, blocking until the transfer is complete. The response - * byte sent to from the attached SPI device is ignored. - * - * \param[in] Byte Byte to send through the SPI interface - */ - static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; - static inline void SPI_SendByte(const uint8_t Byte) - { - SPDR = Byte; - while (!(SPSR & (1 << SPIF))); - } - - /** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response - * byte from the attached SPI device is returned. - * - * \return The response byte from the attached SPI device - */ - static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; - static inline uint8_t SPI_ReceiveByte(void) - { - SPDR = 0x00; - while (!(SPSR & (1 << SPIF))); - return SPDR; - } - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Master include file for the SPI peripheral driver. + * + * Hardware SPI subsystem driver for the supported USB AVRs models. + */ + +/** \ingroup Group_PeripheralDrivers + * @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - None + * + * \section Module Description + * Driver for the hardware SPI port available on most AVR models. This module provides + * an easy to use driver for the setup of and transfer of data over the AVR's SPI port. + * + * @{ + */ + +#ifndef __SPI_H__ +#define __SPI_H__ + + /* Includes: */ + #include + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Macros: */ + #define SPI_USE_DOUBLESPEED (1 << SPE) + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 2. */ + #define SPI_SPEED_FCPU_DIV_2 SPI_USE_DOUBLESPEED + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 4. */ + #define SPI_SPEED_FCPU_DIV_4 0 + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 8. */ + #define SPI_SPEED_FCPU_DIV_8 (SPI_USE_DOUBLESPEED | (1 << SPR0)) + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 16. */ + #define SPI_SPEED_FCPU_DIV_16 (1 << SPR0) + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 32. */ + #define SPI_SPEED_FCPU_DIV_32 (SPI_USE_DOUBLESPEED | (1 << SPR1)) + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 64. */ + #define SPI_SPEED_FCPU_DIV_64 (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0)) + + /** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */ + #define SPI_SPEED_FCPU_DIV_128 ((1 << SPR1) | (1 << SPR0)) + + /** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */ + #define SPI_SCK_LEAD_RISING (0 << CPOL) + + /** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */ + #define SPI_SCK_LEAD_FALLING (1 << CPOL) + + /** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */ + #define SPI_SAMPLE_LEADING (0 << CPHA) + + /** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */ + #define SPI_SAMPLE_TRAILING (1 << CPHA) + + /** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */ + #define SPI_MODE_SLAVE (0 << MSTR) + + /** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */ + #define SPI_MODE_MASTER (1 << MSTR) + + /* Inline Functions: */ + /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other + * SPI routines. + * + * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the SPI_SPEED_*, + * SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks + */ + static inline void SPI_Init(const uint8_t SPIOptions) + { + DDRB |= ((1 << 1) | (1 << 2)); + PORTB |= ((1 << 0) | (1 << 3)); + + SPCR = ((1 << SPE) | SPIOptions); + + if (SPIOptions & SPI_USE_DOUBLESPEED) + SPSR |= (1 << SPI2X); + else + SPSR &= ~(1 << SPI2X); + } + + /** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */ + static inline void SPI_ShutDown(void) + { + DDRB &= ~((1 << 1) | (1 << 2)); + PORTB &= ~((1 << 0) | (1 << 3)); + + SPCR = 0; + SPSR = 0; + } + + /** Sends and receives a byte through the SPI interface, blocking until the transfer is complete. + * + * \param[in] Byte Byte to send through the SPI interface + * + * \return Response byte from the attached SPI device + */ + static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline uint8_t SPI_TransferByte(const uint8_t Byte) + { + SPDR = Byte; + while (!(SPSR & (1 << SPIF))); + return SPDR; + } + + /** Sends a byte through the SPI interface, blocking until the transfer is complete. The response + * byte sent to from the attached SPI device is ignored. + * + * \param[in] Byte Byte to send through the SPI interface + */ + static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE; + static inline void SPI_SendByte(const uint8_t Byte) + { + SPDR = Byte; + while (!(SPSR & (1 << SPIF))); + } + + /** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response + * byte from the attached SPI device is returned. + * + * \return The response byte from the attached SPI device + */ + static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT; + static inline uint8_t SPI_ReceiveByte(void) + { + SPDR = 0x00; + while (!(SPSR & (1 << SPIF))); + return SPDR; + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ -- cgit v1.2.3