From 711542ee8986482a12796ffdbc4a32912b267e44 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 16 Jun 2010 11:01:01 +0000 Subject: Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better. --- LUFA/Drivers/USB/HighLevel/Events.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'LUFA/Drivers/USB/HighLevel/Events.h') diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index e8984a419..7e82ff36d 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -188,7 +188,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -206,7 +206,7 @@ * \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller. * this means that the current connection state is derived from the bus suspension and wake up events by default, * which is not always accurate (host may suspend the bus while still connected). If the actual connection state - * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by + * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually. * \n\n @@ -226,7 +226,7 @@ * This event is time-critical; each packet within the request transaction must be acknowledged or * sent within 50ms or the host will abort the transfer. * - * The library interally handles all standard control requests with the exceptions of SYNC FRAME, + * The library internally handles all standard control requests with the exceptions of SYNC FRAME, * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left * for the user to process via this event if desired. If not handled in the user application, requests * are automatically STALLed. @@ -307,7 +307,7 @@ * millisecond timer source when the USB bus is enumerated in device mode to a USB host. * * This event is time-critical; it is run once per millisecond and thus long handlers will significantly - * degrade device performance. This event should only be enabled when needed to reduce device wakeups. + * degrade device performance. This event should only be enabled when needed to reduce device wake-ups. * * \note This event is not normally active - it must be manually enabled and disabled via the * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration. -- cgit v1.2.3