From d6edfe35c8a9490407e4a5e34f8e5108c6a260a3 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Mon, 9 Nov 2009 13:15:28 +0000 Subject: Spell check all source code variables, comments and strings. --- LUFA/Drivers/USB/HighLevel/Events.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'LUFA/Drivers/USB/HighLevel/Events.h') diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h index 1e03e7b48..933091a5b 100644 --- a/LUFA/Drivers/USB/HighLevel/Events.h +++ b/LUFA/Drivers/USB/HighLevel/Events.h @@ -192,7 +192,7 @@ * be a standard request that the library has no handler code for, or a class specific request * issued to the device which must be handled appropriately. * - * This event is time-critical; eack packet within the request transaction must be acknowedged or + * This event is time-critical; each packet within the request transaction must be acknowledged or * sent within 50ms or the host will abort the transfer. * * \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see @@ -258,7 +258,7 @@ void EVENT_USB_Device_Reset(void); /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB - * frame, once per millisecond, and is synchronised to the USB bus. This can be used as an accurate + * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate * millisecond timer source when the USB bus is enumerated in device mode to a USB host. * * This event is time-critical; it is run once per millisecond and thus long handlers will significantly -- cgit v1.2.3