From 8b5aa616013811faf53fb5c1f2fdb819dd671b36 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Thu, 24 Nov 2011 01:24:01 +0000 Subject: Add new Android Open Accessory class driver to the library core and add a new Android Open Accessory Host ClassDriver demo. --- LUFA/DoxygenPages/ChangeLog.txt | 1 + LUFA/DoxygenPages/FutureChanges.txt | 1 + LUFA/DoxygenPages/LibraryApps.txt | 3 +- LUFA/Drivers/USB/Class/AndroidAccessoryClass.h | 75 ++++ LUFA/Drivers/USB/Class/AudioClass.h | 4 +- LUFA/Drivers/USB/Class/CDCClass.h | 4 +- .../USB/Class/Common/AndroidAccessoryClassCommon.h | 125 ++++++ LUFA/Drivers/USB/Class/Device/AudioClassDevice.h | 2 +- LUFA/Drivers/USB/Class/Device/CDCClassDevice.h | 2 +- LUFA/Drivers/USB/Class/Device/HIDClassDevice.h | 2 +- LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h | 2 +- .../USB/Class/Device/MassStorageClassDevice.h | 2 +- LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h | 2 +- LUFA/Drivers/USB/Class/HIDClass.h | 4 +- .../USB/Class/Host/AndroidAccessoryClassHost.c | 448 +++++++++++++++++++++ .../USB/Class/Host/AndroidAccessoryClassHost.h | 327 +++++++++++++++ LUFA/Drivers/USB/Class/Host/AudioClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/CDCClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/HIDClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/MIDIClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/PrinterClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/RNDISClassHost.h | 10 +- LUFA/Drivers/USB/Class/Host/StillImageClassHost.h | 2 +- LUFA/Drivers/USB/Class/MIDIClass.h | 4 +- LUFA/Drivers/USB/Class/MassStorageClass.h | 4 +- LUFA/Drivers/USB/Class/PrinterClass.h | 2 +- LUFA/Drivers/USB/Class/RNDISClass.h | 4 +- LUFA/Drivers/USB/Class/StillImageClass.h | 2 +- LUFA/Drivers/USB/USB.h | 6 + LUFA/makefile | 53 +-- 31 files changed, 1068 insertions(+), 83 deletions(-) create mode 100644 LUFA/Drivers/USB/Class/AndroidAccessoryClass.h create mode 100644 LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h create mode 100644 LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c create mode 100644 LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h (limited to 'LUFA') diff --git a/LUFA/DoxygenPages/ChangeLog.txt b/LUFA/DoxygenPages/ChangeLog.txt index a6876520e..6ac480446 100644 --- a/LUFA/DoxygenPages/ChangeLog.txt +++ b/LUFA/DoxygenPages/ChangeLog.txt @@ -12,6 +12,7 @@ * - Added support for the XMEGA A3BU Xplained board * - Added support for the new B series XMEGA devices * - Added support for version 2 of the Teensy boards (thanks to Christoph Redecker) + * - Added new Android Accessory Host class driver * - Library Applications: * - Added User Application APIs to the CDC and DFU class bootloaders * - Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs) diff --git a/LUFA/DoxygenPages/FutureChanges.txt b/LUFA/DoxygenPages/FutureChanges.txt index 438e14a47..9664871ee 100644 --- a/LUFA/DoxygenPages/FutureChanges.txt +++ b/LUFA/DoxygenPages/FutureChanges.txt @@ -40,6 +40,7 @@ * -# Add class driver support for Test and Measurement class * -# Add class driver support for EEM class * -# Add class driver support for ECM class + * -# Add class driver support for the Android Accessory Host class * -# Port all demos to multiple architectures * - Ports * -# Finish USB XMEGA port diff --git a/LUFA/DoxygenPages/LibraryApps.txt b/LUFA/DoxygenPages/LibraryApps.txt index 68c84a914..76dea8b08 100644 --- a/LUFA/DoxygenPages/LibraryApps.txt +++ b/LUFA/DoxygenPages/LibraryApps.txt @@ -66,6 +66,7 @@ * Measurement class * - Host * - ClassDriver + * - AndroidAccessoryHost - Android Accessory host demo, using the library USB Android Open Accessory Class driver framework * - AudioInputHost - Audio Input host demo, using the library USB Audio Class driver framework * - AudioOutputHost - Audio Output host demo, using the library USB Audio Class driver framework * - JoystickHostWithParser - Joystick host demo with HID Descriptor parser, using the library USB HID Class driver framework @@ -79,7 +80,7 @@ * - StillImageHost - Still Image Camera host demo, using the library USB Still Image Class driver framework * - VirtualSerialHost - Virtual Serial Port host demo, using the library USB CDC Class driver framework * - LowLevel - * - AndroidAccessoryHost - Android Accessory host demo, using the low level LUFA APIs to implement the Android Accessory Host class + * - AndroidAccessoryHost - Android Accessory host demo, using the low level LUFA APIs to implement the Android Open Accessory class * - AudioInputHost - Audio Input host demo, using the low level LUFA APIs to implement the USB Audio class * - AudioOutputHost - Audio Output host demo, using the low level LUFA APIs to implement the USB Audio class * - GenericHIDHost - Generic HID host demo, using the low level LUFA APIs to implement the USB HID class diff --git a/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h b/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h new file mode 100644 index 000000000..00eedd8e8 --- /dev/null +++ b/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h @@ -0,0 +1,75 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Master include file for the library USB Android Open Accessory Class driver. + * + * Master include file for the library USB Android Open Accessory Class driver, for both host and device modes, where available. + * + * This file should be included in all user projects making use of this optional class driver, instead of + * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories. + */ + +/** \ingroup Group_USBClassDrivers + * \defgroup Group_USBClassAOA Android Open Accessory Class Driver + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) + * + * \section Sec_ModDescription Module Description + * Android Open Accessory Class Driver module. This module contains an internal implementation of the USB Android Open Accessory + * Class, for Host USB mode. User applications can use this class driver instead of implementing the Android Open Accessory Class + * manually via the low-level LUFA APIs. + * + * This module is designed to simplify the user code by exposing only the required interface needed to interface with + * Host using the USB Android Open Accessory Class. + * + * @{ + */ + +#ifndef _AOA_CLASS_H_ +#define _AOA_CLASS_H_ + + /* Macros: */ + #define __INCLUDE_FROM_USB_DRIVER + #define __INCLUDE_FROM_AOA_DRIVER + + /* Includes: */ + #include "../Core/USBMode.h" + + #if defined(USB_CAN_BE_HOST) + #include "Host/AndroidAccessoryClassHost.h" + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Class/AudioClass.h b/LUFA/Drivers/USB/Class/AudioClass.h index ff6eb9190..ce3b41e8e 100644 --- a/LUFA/Drivers/USB/Class/AudioClass.h +++ b/LUFA/Drivers/USB/Class/AudioClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/Audio.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/Audio.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/AudioClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/AudioClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Audio 1.0 Class Driver module. This module contains an internal implementation of the USB Audio 1.0 Class, for both diff --git a/LUFA/Drivers/USB/Class/CDCClass.h b/LUFA/Drivers/USB/Class/CDCClass.h index 4e3a06d61..ead11c1a9 100644 --- a/LUFA/Drivers/USB/Class/CDCClass.h +++ b/LUFA/Drivers/USB/Class/CDCClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/CDC.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/CDC.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/CDCClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/CDCClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * CDC Class Driver module. This module contains an internal implementation of the USB CDC-ACM class Virtual Serial diff --git a/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h b/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h new file mode 100644 index 000000000..a7ea91638 --- /dev/null +++ b/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h @@ -0,0 +1,125 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Common definitions and declarations for the library USB Android Open Accessory Class driver. + * + * Common definitions and declarations for the library USB Android Open Accessory Class driver. + * + * \note This file should not be included directly. It is automatically included as needed by the USB module driver + * dispatch header located in LUFA/Drivers/USB.h. + */ + +/** \ingroup Group_USBClassAOA + * \defgroup Group_USBClassAOACommon Common Class Definitions + * + * \section Sec_ModDescription Module Description + * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB + * Android Open Accessory Class. + * + * @{ + */ + +#ifndef _AOA_CLASS_COMMON_H_ +#define _AOA_CLASS_COMMON_H_ + + /* Includes: */ + #include "../../Core/StdDescriptors.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_AOA_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. + #endif + + /* Macros: */ + #define ANDROID_VENDOR_ID 0x18D1 + #define ANDROID_ACCESSORY_PRODUCT_ID 0x2D00 + #define ANDROID_ACCESSORY_ADB_PRODUCT_ID 0x2D01 + + /* Enums: */ + /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the + * Android Open Accessory class. + */ + enum AOA_Descriptor_ClassSubclassProtocol_t + { + AOA_CSCP_AOADataClass = 0xFF, /**< Descriptor Class value indicating that the device or interface + * belongs to the AOA data class. + */ + AOA_CSCP_AOADataSubclass = 0x00, /**< Descriptor Subclass value indicating that the device or interface + * belongs to AOA data subclass. + */ + AOA_CSCP_AOADataProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or interface + * belongs to the AOA data class protocol. + */ + }; + + /** Enum for the Android Open Accessory class specific control requests that can be issued by the USB bus host. */ + enum AOA_ClassRequests_t + { + AOA_REQ_GetAccessoryProtocol = 0x33, /**< Android Open Accessory control request to retrieve the device's supported Accessory Protocol version. */ + AOA_REQ_SendString = 0x34, /**< Android Open Accessory control request to set an accessory property string in the device. */ + AOA_REQ_StartAccessoryMode = 0x35, /**< Android Open Accessory control request to switch the device into Accessory mode. */ + }; + + /** Enum for the possible Android Open Accessory property string indexes. */ + enum AOA_Strings_t + { + AOA_STRING_Manufacturer = 0, /**< Index of the Manufacturer property string. */ + AOA_STRING_Model = 1, /**< Index of the Model Name property string. */ + AOA_STRING_Description = 2, /**< Index of the Description property string. */ + AOA_STRING_Version = 3, /**< Index of the Version Number property string. */ + AOA_STRING_URI = 4, /**< Index of the URI Information property string. */ + AOA_STRING_Serial = 5, /**< Index of the Serial Number property string. */ + + #if !defined(__DOXYGEN__) + AOA_STRING_TOTAL_STRINGS + #endif + }; + + /** Enum for the possible Android Open Accessory protocol versions. */ + enum AOA_Protocols_t + { + AOA_PROTOCOL_Accessory = 0x0001, /**< Android Open Accessory version 1. */ + }; + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h index 175bc8bf4..0f2185b8b 100644 --- a/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/Audio.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/AudioClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the Audio 1.0 USB Class driver. diff --git a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h index 449b76afd..24942560f 100644 --- a/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/CDC.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/CDCClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the CDC USB Class driver. diff --git a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h index 40aab3902..4b0622f76 100644 --- a/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/HID.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/HIDClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the HID USB Class driver. diff --git a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h index c73ce43bf..350978033 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/MIDI.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the MIDI USB Class driver. diff --git a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h index ce0bcb787..f55837eed 100644 --- a/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/MassStorage.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver. diff --git a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h index 9953fa1a3..dbef115a3 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h +++ b/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/RNDIS.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Device Mode USB Class driver framework interface, for the RNDIS USB Class driver. diff --git a/LUFA/Drivers/USB/Class/HIDClass.h b/LUFA/Drivers/USB/Class/HIDClass.h index 71a9b2ea4..658f639e2 100644 --- a/LUFA/Drivers/USB/Class/HIDClass.h +++ b/LUFA/Drivers/USB/Class/HIDClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/HID.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/HID.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/HIDClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/HIDClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * - LUFA/Drivers/USB/Class/Host/HIDParser.c (Makefile source module name: LUFA_SRC_USB) * * \section Sec_ModDescription Module Description diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c new file mode 100644 index 000000000..299f294c9 --- /dev/null +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c @@ -0,0 +1,448 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#define __INCLUDE_FROM_USB_DRIVER +#include "../../Core/USBMode.h" + +#if defined(USB_CAN_BE_HOST) + +#define __INCLUDE_FROM_AOA_DRIVER +#define __INCLUDE_FROM_ANDROIDACCESSORY_HOST_C +#include "AndroidAccessoryClassHost.h" + +bool AOA_Host_ValidateAccessoryDevice(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const USB_Descriptor_Device_t* const DeviceDescriptor, + bool* const NeedModeSwitch) +{ + if (DeviceDescriptor->Header.Type != DTYPE_Device) + return false; + + if (DeviceDescriptor->VendorID != ANDROID_VENDOR_ID) + return false; + + *NeedModeSwitch = ((DeviceDescriptor->ProductID != ANDROID_ACCESSORY_PRODUCT_ID) && + (DeviceDescriptor->ProductID != ANDROID_ACCESSORY_ADB_PRODUCT_ID)); + + return true; +} + +uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + uint16_t ConfigDescriptorSize, + void* ConfigDescriptorData) +{ + USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; + USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; + USB_Descriptor_Interface_t* AOAInterface = NULL; + + memset(&AOAInterfaceInfo->State, 0x00, sizeof(AOAInterfaceInfo->State)); + + if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration) + return AOA_ENUMERROR_InvalidConfigDescriptor; + + if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, + DCOMP_AOA_Host_NextAndroidAccessoryInterface) != DESCRIPTOR_SEARCH_COMP_Found) + { + return AOA_ENUMERROR_NoCompatibleInterfaceFound; + } + + AOAInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t); + + while (!(DataINEndpoint) || !(DataOUTEndpoint)) + { + if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData, + DCOMP_AOA_Host_NextInterfaceBulkEndpoint) != DESCRIPTOR_SEARCH_COMP_Found) + { + return AOA_ENUMERROR_NoCompatibleInterfaceFound; + } + + USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t); + + if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN) + DataINEndpoint = EndpointData; + else + DataOUTEndpoint = EndpointData; + } + + for (uint8_t PipeNum = 1; PipeNum < PIPE_TOTAL_PIPES; PipeNum++) + { + uint16_t Size; + uint8_t Type; + uint8_t Token; + uint8_t EndpointAddress; + bool DoubleBanked; + + if (PipeNum == AOAInterfaceInfo->Config.DataINPipeNumber) + { + Size = le16_to_cpu(DataINEndpoint->EndpointSize); + EndpointAddress = DataINEndpoint->EndpointAddress; + Token = PIPE_TOKEN_IN; + Type = EP_TYPE_BULK; + DoubleBanked = AOAInterfaceInfo->Config.DataINPipeDoubleBank; + + AOAInterfaceInfo->State.DataINPipeSize = DataINEndpoint->EndpointSize; + } + else if (PipeNum == AOAInterfaceInfo->Config.DataOUTPipeNumber) + { + Size = le16_to_cpu(DataOUTEndpoint->EndpointSize); + EndpointAddress = DataOUTEndpoint->EndpointAddress; + Token = PIPE_TOKEN_OUT; + Type = EP_TYPE_BULK; + DoubleBanked = AOAInterfaceInfo->Config.DataOUTPipeDoubleBank; + + AOAInterfaceInfo->State.DataOUTPipeSize = DataOUTEndpoint->EndpointSize; + } + else + { + continue; + } + + if (!(Pipe_ConfigurePipe(PipeNum, Type, Token, EndpointAddress, Size, + DoubleBanked ? PIPE_BANK_DOUBLE : PIPE_BANK_SINGLE))) + { + return AOA_ENUMERROR_PipeConfigurationFailed; + } + } + + AOAInterfaceInfo->State.IsActive = true; + AOAInterfaceInfo->State.InterfaceNumber = AOAInterface->InterfaceNumber; + + return AOA_ENUMERROR_NoError; +} + +static uint8_t DCOMP_AOA_Host_NextAndroidAccessoryInterface(void* const CurrentDescriptor) +{ + USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); + + if (Header->Type == DTYPE_Interface) + { + USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t); + + if ((Interface->Class == AOA_CSCP_AOADataClass) && + (Interface->SubClass == AOA_CSCP_AOADataSubclass) && + (Interface->Protocol == AOA_CSCP_AOADataProtocol)) + { + return DESCRIPTOR_SEARCH_Found; + } + } + + return DESCRIPTOR_SEARCH_NotFound; +} + +static uint8_t DCOMP_AOA_Host_NextInterfaceBulkEndpoint(void* const CurrentDescriptor) +{ + USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t); + + if (Header->Type == DTYPE_Endpoint) + { + USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t); + + uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK); + + if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress)))) + return DESCRIPTOR_SEARCH_Found; + } + else if (Header->Type == DTYPE_Interface) + { + return DESCRIPTOR_SEARCH_Fail; + } + + return DESCRIPTOR_SEARCH_NotFound; +} + +void AOA_Host_USBTask(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return; + + #if !defined(NO_CLASS_DRIVER_AUTOFLUSH) + AOA_Host_Flush(AOAInterfaceInfo); + #endif +} + +uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) +{ + uint8_t ErrorCode; + + uint16_t AccessoryProtocol; + if ((ErrorCode = AOA_Host_GetAccessoryProtocol(&AccessoryProtocol)) != HOST_WAITERROR_Successful) + return ErrorCode; + + if (AccessoryProtocol != CPU_TO_LE16(AOA_PROTOCOL_Accessory)) + return AOA_ERROR_LOGICAL_CMD_FAILED; + + for (uint8_t PropertyIndex = 0; PropertyIndex < AOA_STRING_TOTAL_STRINGS; PropertyIndex++) + { + if ((ErrorCode = AOA_Host_SendPropertyString(AOAInterfaceInfo, PropertyIndex)) != HOST_WAITERROR_Successful) + return ErrorCode; + } + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE), + .bRequest = AOA_REQ_StartAccessoryMode, + .wValue = 0, + .wIndex = 0, + .wLength = 0, + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + return USB_Host_SendControlRequest(NULL); +} + +static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol) +{ + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_VENDOR | REQREC_DEVICE), + .bRequest = AOA_REQ_GetAccessoryProtocol, + .wValue = 0, + .wIndex = 0, + .wLength = sizeof(uint16_t), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + return USB_Host_SendControlRequest(Protocol); +} + +static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t StringIndex) +{ + const char* String = ((char**)&AOAInterfaceInfo->Config.PropertyStrings)[StringIndex]; + + if (String == NULL) + String = ""; + + USB_ControlRequest = (USB_Request_Header_t) + { + .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE), + .bRequest = AOA_REQ_SendString, + .wValue = 0, + .wIndex = StringIndex, + .wLength = (strlen(String) + 1), + }; + + Pipe_SelectPipe(PIPE_CONTROLPIPE); + return USB_Host_SendControlRequest((char*)String); +} + +uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t* const Buffer, + const uint16_t Length) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return PIPE_READYWAIT_DeviceDisconnected; + + uint8_t ErrorCode; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + + Pipe_Unfreeze(); + ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL); + Pipe_Freeze(); + + return ErrorCode; +} + +uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const char* const String) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return PIPE_READYWAIT_DeviceDisconnected; + + uint8_t ErrorCode; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + + Pipe_Unfreeze(); + ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL); + Pipe_Freeze(); + + return ErrorCode; +} + +uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t Data) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return PIPE_READYWAIT_DeviceDisconnected; + + uint8_t ErrorCode; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_Unfreeze(); + + if (!(Pipe_IsReadWriteAllowed())) + { + Pipe_ClearOUT(); + + if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError) + return ErrorCode; + } + + Pipe_Write_8(Data); + Pipe_Freeze(); + + return PIPE_READYWAIT_NoError; +} + +uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return 0; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber); + Pipe_Unfreeze(); + + if (Pipe_IsINReceived()) + { + if (!(Pipe_BytesInPipe())) + { + Pipe_ClearIN(); + Pipe_Freeze(); + return 0; + } + else + { + Pipe_Freeze(); + return Pipe_BytesInPipe(); + } + } + else + { + Pipe_Freeze(); + + return 0; + } +} + +int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return -1; + + int16_t ReceivedByte = -1; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipeNumber); + Pipe_Unfreeze(); + + if (Pipe_IsINReceived()) + { + if (Pipe_BytesInPipe()) + ReceivedByte = Pipe_Read_8(); + + if (!(Pipe_BytesInPipe())) + Pipe_ClearIN(); + } + + Pipe_Freeze(); + + return ReceivedByte; +} + +uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) +{ + if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive)) + return PIPE_READYWAIT_DeviceDisconnected; + + uint8_t ErrorCode; + + Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipeNumber); + Pipe_Unfreeze(); + + if (!(Pipe_BytesInPipe())) + return PIPE_READYWAIT_NoError; + + bool BankFull = !(Pipe_IsReadWriteAllowed()); + + Pipe_ClearOUT(); + + if (BankFull) + { + if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError) + return ErrorCode; + + Pipe_ClearOUT(); + } + + Pipe_Freeze(); + + return PIPE_READYWAIT_NoError; +} + +#if defined(FDEV_SETUP_STREAM) +void AOA_Host_CreateStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + FILE* const Stream) +{ + *Stream = (FILE)FDEV_SETUP_STREAM(AOA_Host_putchar, AOA_Host_getchar, _FDEV_SETUP_RW); + fdev_set_udata(Stream, AOAInterfaceInfo); +} + +void AOA_Host_CreateBlockingStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + FILE* const Stream) +{ + *Stream = (FILE)FDEV_SETUP_STREAM(AOA_Host_putchar, AOA_Host_getchar_Blocking, _FDEV_SETUP_RW); + fdev_set_udata(Stream, AOAInterfaceInfo); +} + +static int AOA_Host_putchar(char c, + FILE* Stream) +{ + return AOA_Host_SendByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream), c) ? _FDEV_ERR : 0; +} + +static int AOA_Host_getchar(FILE* Stream) +{ + int16_t ReceivedByte = AOA_Host_ReceiveByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream)); + + if (ReceivedByte < 0) + return _FDEV_EOF; + + return ReceivedByte; +} + +static int AOA_Host_getchar_Blocking(FILE* Stream) +{ + int16_t ReceivedByte; + + while ((ReceivedByte = AOA_Host_ReceiveByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream))) < 0) + { + if (USB_HostState == HOST_STATE_Unattached) + return _FDEV_EOF; + + AOA_Host_USBTask((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream)); + USB_USBTask(); + } + + return ReceivedByte; +} +#endif + +#endif + diff --git a/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h new file mode 100644 index 000000000..262ecbe73 --- /dev/null +++ b/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h @@ -0,0 +1,327 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2011. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Host mode driver for the library USB Android Open Accessory Class driver. + * + * Host mode driver for the library USB Android Open Accessory Class driver. + * + * \note This file should not be included directly. It is automatically included as needed by the USB module driver + * dispatch header located in LUFA/Drivers/USB.h. + */ + +/** \ingroup Group_USBClassAOA + * \defgroup Group_USBClassAndroidAccessoryHost Android Open Accessory Class Host Mode Driver + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) + * + * \section Sec_ModDescription Module Description + * Host Mode USB Class driver framework interface, for the Android Open Accessory USB Class driver. + * + * @{ + */ + +#ifndef __AOA_CLASS_HOST_H__ +#define __AOA_CLASS_HOST_H__ + + /* Includes: */ + #include "../../USB.h" + #include "../Common/AndroidAccessoryClassCommon.h" + + #include + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Preprocessor Checks: */ + #if !defined(__INCLUDE_FROM_AOA_DRIVER) + #error Do not include this file directly. Include LUFA/Drivers/USB.h instead. + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Error code for some Android Open Accessory Host functions, indicating a logical (and not hardware) error. */ + #define AOA_ERROR_LOGICAL_CMD_FAILED 0x80 + + /* Type Defines: */ + /** \brief Android Open Accessory Class Host Mode Configuration and State Structure. + * + * Class state structure. An instance of this structure should be made within the user application, + * and passed to each of the Android Open Accessory class driver functions as the \c AOAInterfaceInfo + * parameter. This stores each Android Open Accessory interface's configuration and state information. + */ + typedef struct + { + const struct + { + uint8_t DataINPipeNumber; /**< Pipe number of the AOA interface's IN data pipe. */ + bool DataINPipeDoubleBank; /**< Indicates if the AOA interface's IN data pipe should use double banking. */ + + uint8_t DataOUTPipeNumber; /**< Pipe number of the AOA interface's OUT data pipe. */ + bool DataOUTPipeDoubleBank; /**< Indicates if the AOA interface's OUT data pipe should use double banking. */ + + struct + { + char* Manufacturer; /**< Device manufacturer string. */ + char* Model; /**< Device model name string. */ + char* Description; /**< Device description string. */ + char* Version; /**< Device version string. */ + char* URI; /**< Device URI information string. */ + char* Serial; /**< Device serial number string. */ + } ATTR_PACKED PropertyStrings; /**< Android Accessory property strings, sent to identify the accessory when the + * Android device is switched into Open Accessory mode. */ + } Config; /**< Config data for the USB class interface within the device. All elements in this section + * must be set or the interface will fail to enumerate and operate correctly. + */ + struct + { + bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid + * after \ref AOA_Host_ConfigurePipes() is called and the Host state machine is in the + * Configured state. + */ + uint8_t InterfaceNumber; /**< Interface index of the AOA interface within the attached device. */ + + uint16_t DataINPipeSize; /**< Size in bytes of the AOA interface's IN data pipe. */ + uint16_t DataOUTPipeSize; /**< Size in bytes of the AOA interface's OUT data pipe. */ + } State; /**< State data for the USB class interface within the device. All elements in this section + * may be set to initial values, but may also be ignored to default to sane values when + * the interface is enumerated. + */ + } USB_ClassInfo_AOA_Host_t; + + /* Enums: */ + /** Enum for the possible error codes returned by the \ref AOA_Host_ConfigurePipes() function. */ + enum AOA_Host_EnumerationFailure_ErrorCodes_t + { + AOA_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */ + AOA_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */ + AOA_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Android Open Accessory interface was not found in the device's Configuration Descriptor. */ + AOA_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */ + }; + + /* Function Prototypes: */ + /** General management task for a given Android Open Accessory host class interface, required for the correct operation of the interface. + * This should be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an Android Open Accessory Class host configuration and state. + */ + void AOA_Host_USBTask(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Validates a device descriptor, to check if the device is a valid Android device, and if it is currently in Android Open Accessory mode. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state. + * \param[in] DeviceDescriptor Pointer a buffer containing the attached device's Device Descriptor. + * \param[out] NeedModeSwitch Pointer to a boolean where the mode switch requirement of the attached device is to be stored. + * + * \return Boolean \c true if the attached device is a valid Android device, \c false otherwise. + */ + bool AOA_Host_ValidateAccessoryDevice(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const USB_Descriptor_Device_t* const DeviceDescriptor, + bool* const NeedModeSwitch) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3); + + /** Host interface configuration routine, to configure a given Android Open Accessory host interface instance using the Configuration + * Descriptor read from an attached USB device. This function automatically updates the given Android Open Accessory Host instance's + * state values and configures the pipes required to communicate with the interface if it is found within the device. This should be + * called once after the stack has enumerated the attached device, while the host state machine is in the Addressed state. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. + * + * \return A value from the \ref AOA_Host_EnumerationFailure_ErrorCodes_t enum. + */ + uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + uint16_t ConfigDescriptorSize, + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + + /** Starts Accessory Mode in the attached Android device. This function will validate the device's Android Open Accessory protocol + * version, send the configured property strings, and request a switch to Android Open Accessory mode. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state. + * + * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occured.. + */ + uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Sends a given data buffer to the attached USB device, if connected. If a device is not connected when the function is + * called, the data will be discarded. Bytes will be queued for transmission to the device until either the pipe bank + * becomes full, or the \ref AOA_Host_Flush() function is called to flush the pending data to the device. This allows for + * multiple bytes to be packed into a single pipe packet, increasing data throughput. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * \param[in] Buffer Pointer to a buffer containing the data to send to the device. + * \param[in] Length Length of the data to send to the device. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t* const Buffer, + const uint16_t Length); + + /** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the + * function is called, the string is discarded. Bytes will be queued for transmission to the device until either the pipe + * bank becomes full, or the \ref AOA_Host_Flush() function is called to flush the pending data to the device. This allows + * for multiple bytes to be packed into a single pipe packet, increasing data throughput. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * \param[in] String Pointer to the null terminated string to send to the device. + * + * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum. + */ + uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); + + /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the + * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the + * \ref AOA_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be + * packed into a single pipe packet, increasing data throughput. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * \param[in] Data Byte of data to send to the device. + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1); + + /** Determines the number of bytes received by the AOA interface from the device, waiting to be read. This indicates the number + * of bytes in the IN pipe bank only, and thus the number of calls to \ref AOA_Host_ReceiveByte() which are guaranteed to succeed + * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be + * released back to the USB controller until all bytes are read. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * + * \return Total number of buffered bytes received from the device. + */ + uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function + * returns a negative value. The \ref AOA_Host_BytesReceived() function may be queried in advance to determine how many bytes + * are currently buffered in the AOA interface's data receive pipe. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * + * \return Next received byte from the device, or a negative value if no data received. + */ + int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared. + * + * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the + * call will fail. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state. + * + * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum. + */ + uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); + + /** Creates a standard character stream for the given AOA Device instance so that it can be used with all the regular + * functions in the standard \c library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created + * stream is bidirectional and can be used for both input and output functions. + * + * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single + * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may + * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own + * line buffering. + * + * \note The created stream can be given as stdout if desired to direct the standard output from all \c functions + * to the given AOA interface. + * \n\n + * + * \note This function is not available on all microcontroller architectures. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class configuration and state. + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed. + */ + void AOA_Host_CreateStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + FILE* const Stream); + + /** Identical to \ref AOA_Host_CreateStream(), except that reads are blocking until the calling stream function terminates + * the transfer. While blocking, the USB and AOA service tasks are called repeatedly to maintain USB communications. + * + * \note This function is not available on all microcontroller architectures. + * + * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class configuration and state. + * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed. + */ + void AOA_Host_CreateBlockingStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + FILE* const Stream); + + /* Private Interface - For use in library only: */ + #if !defined(__DOXYGEN__) + /* Function Prototypes: */ + #if defined(__INCLUDE_FROM_ANDROIDACCESSORY_HOST_C) + #if defined(FDEV_SETUP_STREAM) + static int AOA_Host_putchar(char c, + FILE* Stream) ATTR_NON_NULL_PTR_ARG(2); + static int AOA_Host_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1); + static int AOA_Host_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1); + #endif + + static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol) ATTR_NON_NULL_PTR_ARG(1); + static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo, + const uint8_t StringIndex) ATTR_NON_NULL_PTR_ARG(1); + + static uint8_t DCOMP_AOA_Host_NextAndroidAccessoryInterface(void* const CurrentDescriptor) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + static uint8_t DCOMP_AOA_Host_NextInterfaceBulkEndpoint(void* const CurrentDescriptor) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1); + #endif + #endif + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ + diff --git a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h index 8be5210c2..1940c0de5 100644 --- a/LUFA/Drivers/USB/Class/Host/AudioClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/AudioClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/Audio.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/AudioClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Audio 1.0 USB Class driver. @@ -126,15 +126,15 @@ * device. This should be called once after the stack has enumerated the attached device, while the host state * machine is in the Addressed state. * - * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref AUDIO_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** Starts or stops the audio streaming for the given configured Audio Host interface, allowing for audio samples to be * send and/or received. diff --git a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h index 4de504380..247bf2426 100644 --- a/LUFA/Drivers/USB/Class/Host/CDCClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/CDCClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/CDC.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/CDCClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the CDC USB Class driver. @@ -151,15 +151,15 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref CDC_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** Sets the line encoding for the attached device's virtual serial port. This should be called when the \c LineEncoding * values of the interface have been changed to push the new settings to the USB device. diff --git a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h index 5d8c8e922..4ce4ef377 100644 --- a/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/HIDClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/HID.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/HIDClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the HID USB Class driver. @@ -151,15 +151,15 @@ * \note Once the device pipes are configured, the HID device's reporting protocol must be set via a call * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function. * - * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref HID_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe. diff --git a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h index 3398830e1..bdc4848e6 100644 --- a/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/MIDI.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/MIDIClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the MIDI USB Class driver. @@ -120,15 +120,15 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref MIDI_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t MIDI_Host_ConfigurePipes(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** General management task for a given MIDI host class interface, required for the correct operation of the interface. This should * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). diff --git a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h index 3b3b9fa5a..c03ba2027 100644 --- a/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/MassStorage.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver. @@ -138,15 +138,15 @@ * is found within the device. This should be called once after the stack has enumerated the attached device, while * the host state machine is in the Addressed state. * - * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref MS_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo, uint16_t ConfigDescriptorSize, - void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** Sends a MASS STORAGE RESET control request to the attached device, resetting the Mass Storage Interface * and readying it for the next Mass Storage command. This should be called after a failed SCSI request to diff --git a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h index f0fe8ee98..07342571e 100644 --- a/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/Printer.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/PrinterClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Printer USB Class driver. @@ -121,15 +121,15 @@ * the device. This should be called once after the stack has enumerated the attached device, while the host state * machine is in the Addressed state. * - * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref PRNT_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** General management task for a given Printer host class interface, required for the correct operation of * the interface. This should be called frequently in the main program loop, before the master USB management task diff --git a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h index 7b0acfb5c..de66c86b2 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/RNDIS.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/RNDISClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Microsoft RNDIS Ethernet @@ -131,15 +131,15 @@ * This should be called once after the stack has enumerated the attached device, while the host state machine is in * the Addressed state. * - * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state. - * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. - * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor. + * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state. + * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor. + * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor. * * \return A value from the \ref RNDIS_Host_EnumerationFailure_ErrorCodes_t enum. */ uint8_t RNDIS_Host_ConfigurePipes(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo, uint16_t ConfigDescriptorSize, - void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); + void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3); /** Sends a RNDIS KEEPALIVE command to the device, to ensure that it does not enter standby mode after periods * of long inactivity. diff --git a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h index 44894fe6b..aa3702b36 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h +++ b/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/StillImage.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/StillImageClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Host Mode USB Class driver framework interface, for the Still Image USB Class driver. diff --git a/LUFA/Drivers/USB/Class/MIDIClass.h b/LUFA/Drivers/USB/Class/MIDIClass.h index fae117b39..d995ee871 100644 --- a/LUFA/Drivers/USB/Class/MIDIClass.h +++ b/LUFA/Drivers/USB/Class/MIDIClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/MIDI.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/MIDI.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/MIDIClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * MIDI Class Driver module. This module contains an internal implementation of the USB MIDI Class, for both Device diff --git a/LUFA/Drivers/USB/Class/MassStorageClass.h b/LUFA/Drivers/USB/Class/MassStorageClass.h index 003c63be2..be01c6752 100644 --- a/LUFA/Drivers/USB/Class/MassStorageClass.h +++ b/LUFA/Drivers/USB/Class/MassStorageClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/MassStorage.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/MassStorage.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Mass Storage Class Driver module. This module contains an internal implementation of the USB Mass Storage Class, for both diff --git a/LUFA/Drivers/USB/Class/PrinterClass.h b/LUFA/Drivers/USB/Class/PrinterClass.h index 52edd5208..0d3e2c35e 100644 --- a/LUFA/Drivers/USB/Class/PrinterClass.h +++ b/LUFA/Drivers/USB/Class/PrinterClass.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/Printer.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/PrinterClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Printer Class Driver module. This module contains an internal implementation of the USB Printer Class, for the base diff --git a/LUFA/Drivers/USB/Class/RNDISClass.h b/LUFA/Drivers/USB/Class/RNDISClass.h index a85ba1d06..150750c15 100644 --- a/LUFA/Drivers/USB/Class/RNDISClass.h +++ b/LUFA/Drivers/USB/Class/RNDISClass.h @@ -42,8 +42,8 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Device/RNDIS.c (Makefile source module name: LUFA_SRC_USBCLASS) - * - LUFA/Drivers/USB/Class/Host/RNDIS.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/RNDISClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * RNDIS Class Driver module. This module contains an internal implementation of the Microsoft USB RNDIS Networking diff --git a/LUFA/Drivers/USB/Class/StillImageClass.h b/LUFA/Drivers/USB/Class/StillImageClass.h index 74e93ed21..92f391f9f 100644 --- a/LUFA/Drivers/USB/Class/StillImageClass.h +++ b/LUFA/Drivers/USB/Class/StillImageClass.h @@ -42,7 +42,7 @@ * * \section Sec_Dependencies Module Source Dependencies * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/USB/Class/Host/StillImage.c (Makefile source module name: LUFA_SRC_USBCLASS) + * - LUFA/Drivers/USB/Class/Host/StillImageClassHost.c (Makefile source module name: LUFA_SRC_USBCLASS) * * \section Sec_ModDescription Module Description * Still Image Class Driver module. This module contains an internal implementation of the USB Still Image Class, diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h index a5a743bef..bb1eab218 100644 --- a/LUFA/Drivers/USB/USB.h +++ b/LUFA/Drivers/USB/USB.h @@ -92,6 +92,11 @@ * Host Mode * * + * Android Open Accessory + * No + * Yes + * + * * Audio * Yes * Yes @@ -388,6 +393,7 @@ #include "Core/OTG.h" #endif + #include "Class/AndroidAccessoryClass.h" #include "Class/AudioClass.h" #include "Class/CDCClass.h" #include "Class/HIDClass.h" diff --git a/LUFA/makefile b/LUFA/makefile index 226cf5a75..bfe9b8a04 100644 --- a/LUFA/makefile +++ b/LUFA/makefile @@ -23,33 +23,34 @@ ifeq ($(origin ARCH), undefined) endif # Define module source file lists -LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \ +LUFA_SRC_USB = $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptor.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c -LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \ - $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \ +LUFA_SRC_USBCLASS = $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \ + $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \ $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c LUFA_SRC_TEMPERATURE = $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c LUFA_SRC_SERIAL = $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c -- cgit v1.2.3