From f01a05415c03b0dd61297849ece2cfcce7f8d3e8 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 1 Jun 2011 14:33:40 +0000 Subject: Spell check library source code files. --- LUFA/CodeTemplates/DriverStubs/Dataflash.h | 2 +- LUFA/Common/Attributes.h | 8 ++++---- LUFA/Common/Common.h | 2 +- LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h | 2 +- LUFA/Drivers/Board/AVR8/STK525/Dataflash.h | 2 +- LUFA/Drivers/Board/AVR8/STK526/Dataflash.h | 2 +- LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h | 2 +- LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h | 2 +- LUFA/Drivers/Board/Buttons.h | 4 ++-- LUFA/Drivers/Board/Dataflash.h | 4 ++-- LUFA/Drivers/Board/Joystick.h | 4 ++-- LUFA/Drivers/Board/LEDs.h | 4 ++-- LUFA/Drivers/Board/Temperature.h | 4 ++-- LUFA/Drivers/Misc/RingBuffer.h | 2 +- LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h | 4 ++-- LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h | 4 ++-- LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h | 2 +- LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h | 8 ++++---- LUFA/Drivers/USB/Class/Common/HID.h | 6 +++--- LUFA/Drivers/USB/Class/Common/HIDParser.h | 6 +++--- LUFA/Drivers/USB/Class/Host/RNDIS.h | 2 +- LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h | 4 ++-- LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h | 2 +- LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h | 2 +- LUFA/Drivers/USB/Core/Endpoint.h | 2 +- LUFA/Drivers/USB/Core/Pipe.h | 2 +- LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h | 4 ++-- LUFA/Drivers/USB/Core/UC3/Host_UC3.h | 2 +- LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h | 2 +- LUFA/ManPages/ChangeLog.txt | 12 ++++++------ LUFA/ManPages/CompileTimeTokens.txt | 4 ++-- LUFA/ManPages/FutureChanges.txt | 2 +- LUFA/ManPages/MigrationInformation.txt | 2 +- 33 files changed, 58 insertions(+), 58 deletions(-) (limited to 'LUFA') diff --git a/LUFA/CodeTemplates/DriverStubs/Dataflash.h b/LUFA/CodeTemplates/DriverStubs/Dataflash.h index 1e451b13a..372d2f2a3 100644 --- a/LUFA/CodeTemplates/DriverStubs/Dataflash.h +++ b/LUFA/CodeTemplates/DriverStubs/Dataflash.h @@ -79,7 +79,7 @@ #define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h index 53cfb6df1..bb0741729 100644 --- a/LUFA/Common/Attributes.h +++ b/LUFA/Common/Attributes.h @@ -42,7 +42,7 @@ * \brief GCC special function/variable attribute macros. * * This module contains macros for applying GCC specific attributes to functions and variables to control various - * optimiser and code generation features of the compiler. Attributes may be placed in the function prototype + * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype * or variable declaration in any order, and multiple attributes can be specified for a single item via a space * separated list. * @@ -85,13 +85,13 @@ */ #define ATTR_NAKED __attribute__ ((naked)) - /** Prevents the compiler from considering a specified function for inlining. When applied, the given - * function will not be inlined under any circumstances. + /** Prevents the compiler from considering a specified function for in-lining. When applied, the given + * function will not be in-lined under any circumstances. */ #define ATTR_NO_INLINE __attribute__ ((noinline)) /** Forces the compiler to inline the specified function. When applied, the given function will be - * inlined under all circumstances. + * in-lined under all circumstances. */ #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline)) diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h index 49a2bcdf1..5635a4ea9 100644 --- a/LUFA/Common/Common.h +++ b/LUFA/Common/Common.h @@ -163,7 +163,7 @@ #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__) /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always - * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimiser + * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer * removes/reorders code to the point where break points cannot reliably be set. * * \note This macro is not available for all architectures. diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h index 9a5d98557..a1e8938d2 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h @@ -83,7 +83,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h index f1c99651a..3b5f1ed63 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h @@ -83,7 +83,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h index 1d07c9e3e..7a5feb725 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h @@ -83,7 +83,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h index 239828f84..c5be10190 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h @@ -86,7 +86,7 @@ #define DATAFLASH_PAGES 8192 /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h index 42c026906..7ecefba5a 100644 --- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h @@ -89,7 +89,7 @@ #endif /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used. */ static inline void Dataflash_Init(void) diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index e4fe21dd0..df74b4631 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -66,7 +66,7 @@ * application. * * \code - * // Initialise the button driver before first use + * // Initialize the button driver before first use * Buttons_Init(); * * printf("Waiting for button press...\r\n"); @@ -131,7 +131,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate + /** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate * I/O pins to an inputs with pull-ups enabled. * * This must be called before any Button driver functions are used. diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index 9d68739af..99679808b 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -66,7 +66,7 @@ * application. * * \code - * // Initialise the SPI and board Dataflash drivers before first use + * // Initialize the SPI and board Dataflash drivers before first use * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); * Dataflash_Init(); @@ -146,7 +146,7 @@ #define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index) /* Inline Functions: */ - /** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC. + /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC. * * \note The microcontroller's SPI driver must be initialized before any of the dataflash commands are used. */ diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index 35b989dec..c517a752b 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -65,7 +65,7 @@ * application. * * \code - * // Initialise the board Joystick driver before first use + * // Initialize the board Joystick driver before first use * Joystick_Init(); * * printf("Waiting for joystick movement...\r\n"); @@ -119,7 +119,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate + /** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate * I/O pins to inputs with their pull-ups enabled. */ static inline void Joystick_Init(void); diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index ac7716b43..100f85214 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -74,7 +74,7 @@ * application. * * \code - * // Initialise the board LED driver before first use + * // Initialize the board LED driver before first use * LEDs_Init(); * * // Turn on each of the four LEDs in turn @@ -187,7 +187,7 @@ /* Pseudo-Functions for Doxygen: */ #if defined(__DOXYGEN__) - /** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port + /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port * I/O pins as outputs, and sets the LEDs to default to off. */ static inline void LEDs_Init(void); diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h index e9f310e53..b41c76290 100644 --- a/LUFA/Drivers/Board/Temperature.h +++ b/LUFA/Drivers/Board/Temperature.h @@ -53,7 +53,7 @@ * application. * * \code - * // Initialise the ADC and board temperature sensor drivers before first use + * // Initialize the ADC and board temperature sensor drivers before first use * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128); * Temperature_Init(); * @@ -102,7 +102,7 @@ #define TEMP_MAX_TEMP ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET_DEGREES) /* Inline Functions: */ - /** Initialises the temperature sensor driver, including setting up the appropriate ADC channel. + /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel. * This must be called before any other temperature sensor routines. * * \pre The ADC itself (not the ADC channel) must be configured separately before calling the diff --git a/LUFA/Drivers/Misc/RingBuffer.h b/LUFA/Drivers/Misc/RingBuffer.h index 504029165..023cc25c4 100644 --- a/LUFA/Drivers/Misc/RingBuffer.h +++ b/LUFA/Drivers/Misc/RingBuffer.h @@ -66,7 +66,7 @@ * RingBuffer_t Buffer; * uint8_t BufferData[128]; * - * // Initialise the buffer with the created storage array + * // Initialize the buffer with the created storage array * RingBuffer_InitBuffer(&Buffer, BufferData, sizeof(BufferData)); * * // Insert some data into the buffer diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h index 99f70d14b..7a02c613a 100644 --- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h @@ -53,7 +53,7 @@ * application. * * \code - * // Initialise the ADC driver before first use + * // Initialize the ADC driver before first use * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32); * * // Must setup the ADC channel to read beforehand @@ -411,7 +411,7 @@ return ADC_GetResult(); } - /** Initialises the ADC, ready for conversions. This must be called before any other ADC operations. + /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations. * The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and * prescaler masks. * diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h index d800fca1a..634c54480 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h @@ -53,7 +53,7 @@ * application. * * \code - * // Initialise the SPI driver before first use + * // Initialize the SPI driver before first use * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); * @@ -159,7 +159,7 @@ //@} /* Inline Functions: */ - /** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other + /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other * SPI routines. * * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*, diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h index bb9ba856e..7f519d3ba 100644 --- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h @@ -51,7 +51,7 @@ * application. * * \code - * // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode) + * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode) * Serial_Init(9600, false); * * // Send a string through the USART diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h index feac8a858..d0c78bc8d 100644 --- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h @@ -52,7 +52,7 @@ * * Low Level API Example: * \code - * // Initialise the TWI driver before first use + * // Initialize the TWI driver before first use * TWI_Init(TWI_BIT_PRESCALE_1, 10); * * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout @@ -91,7 +91,7 @@ * * High Level API Example: * \code - * // Initialise the TWI driver before first use + * // Initialize the TWI driver before first use * TWI_Init(TWI_BIT_PRESCALE_1, 10); * * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout @@ -171,7 +171,7 @@ /** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */ enum TWI_ErrorCodes_t { - TWI_ERROR_NoError = 0, /**< Indicates that the command completed sucessfully. */ + TWI_ERROR_NoError = 0, /**< Indicates that the command completed successfully. */ TWI_ERROR_BusFault = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */ TWI_ERROR_BusCaptureTimeout = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */ TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */ @@ -180,7 +180,7 @@ }; /* Inline Functions: */ - /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be + /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be * before any other TWI operations. * * The generated SCL frequency will be according to the formula 
F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)
. diff --git a/LUFA/Drivers/USB/Class/Common/HID.h b/LUFA/Drivers/USB/Class/Common/HID.h index f02e709d8..a860b6569 100644 --- a/LUFA/Drivers/USB/Class/Common/HID.h +++ b/LUFA/Drivers/USB/Class/Common/HID.h @@ -102,7 +102,7 @@ #define HID_KEYBOARD_LED_KATANA (1 << 3) //@} - /** \name Keyboard Standard Report Key Scancodes */ + /** \name Keyboard Standard Report Key Scan-codes */ //@{ #define HID_KEYBOARD_SC_ERROR_ROLLOVER 0x01 #define HID_KEYBOARD_SC_POST_FAIL 0x02 @@ -483,11 +483,11 @@ /** \hideinitializer * A list of HID report item array elements that describe a typical Vendor Defined byte array HID report descriptor, - * used for transporting abitrary data between the USB host and device via HID reports. The resulting report should be + * used for transporting arbitrary data between the USB host and device via HID reports. The resulting report should be * a uint8_t byte array of the specified length in both Device to Host (IN) and Host to Device (OUT) directions. * * \param[in] VendorPageNum Vendor Defined HID Usage Page index, ranging from 0x00 to 0xFF. - * \param[in] CollectionUsage Vendor Usage for the encompasing report IN and OUT collection, ranging from 0x00 to 0xFF. + * \param[in] CollectionUsage Vendor Usage for the encompassing report IN and OUT collection, ranging from 0x00 to 0xFF. * \param[in] DataINUsage Vendor Usage for the IN report data, ranging from 0x00 to 0xFF. * \param[in] DataOUTUsage Vendor Usage for the OUT report data, ranging from 0x00 to 0xFF. * \param[in] NumBytes Length of the data IN and OUT reports. diff --git a/LUFA/Drivers/USB/Class/Common/HIDParser.h b/LUFA/Drivers/USB/Class/Common/HIDParser.h index c972665ac..e0df87e79 100644 --- a/LUFA/Drivers/USB/Class/Common/HIDParser.h +++ b/LUFA/Drivers/USB/Class/Common/HIDParser.h @@ -54,11 +54,11 @@ * of data exchanged between a HID device and a host, including both the physical encoding of each item * (such as a button, key press or joystick axis) in the sent and received data packets - known as "reports" - * as well as other information about each item such as the usages, data range, physical location and other - * characterstics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it - * is not forced to comply with a given report layout or featureset. + * characteristics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it + * is not forced to comply with a given report layout or feature-set. * * This module also contains routines for the processing of data in an actual HID report, using the parsed report - * descritor data as a guide for the encoding. + * descriptor data as a guide for the encoding. * * @{ */ diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h index 41b235bdf..1d238bd8b 100644 --- a/LUFA/Drivers/USB/Class/Host/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h @@ -155,7 +155,7 @@ */ uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - /** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been + /** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been * configured via the call to \ref RNDIS_Host_ConfigurePipes(). * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state. diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h index 1727da0d8..bdbe31c33 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h @@ -45,7 +45,7 @@ /** \ingroup Group_EndpointPrimitiveRW * \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) - * \brief Endpoint primative read/write definitions for the Atmel AVR8 architecture. + * \brief Endpoint primitive read/write definitions for the Atmel AVR8 architecture. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to endpoints. @@ -182,7 +182,7 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrives the maximum bank size in bytes of a given endpoint. + /** Retrieves the maximum bank size in bytes of a given endpoint. * * \note This macro will only work correctly on endpoint indexes that are compile-time constants * defined by the preprocessor. diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h index 2c2b5068e..6854128d3 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h @@ -330,7 +330,7 @@ */ uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex); - /** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to + /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to * the attached device. * * \note After this routine returns, the control pipe will be selected. diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h index 8022a812a..c7e21f73a 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h @@ -45,7 +45,7 @@ /** \ingroup Group_PipePrimitiveRW * \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8) - * \brief Pipe primative data read/write definitions for the Atmel AVR8 architecture. + * \brief Pipe primitive data read/write definitions for the Atmel AVR8 architecture. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to pipes. diff --git a/LUFA/Drivers/USB/Core/Endpoint.h b/LUFA/Drivers/USB/Core/Endpoint.h index 10b2b9c93..bbd75467f 100644 --- a/LUFA/Drivers/USB/Core/Endpoint.h +++ b/LUFA/Drivers/USB/Core/Endpoint.h @@ -45,7 +45,7 @@ /** \ingroup Group_EndpointRW * \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types - * \brief Endpoint data primative read/write definitions. + * \brief Endpoint data primitive read/write definitions. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to endpoints. diff --git a/LUFA/Drivers/USB/Core/Pipe.h b/LUFA/Drivers/USB/Core/Pipe.h index 5354095a1..8d0864754 100644 --- a/LUFA/Drivers/USB/Core/Pipe.h +++ b/LUFA/Drivers/USB/Core/Pipe.h @@ -45,7 +45,7 @@ /** \ingroup Group_PipeRW * \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types - * \brief Pipe data primative read/write definitions. + * \brief Pipe data primitive read/write definitions. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to pipes. diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h index 4f31a0d86..1c9f6ccf1 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h @@ -45,7 +45,7 @@ /** \ingroup Group_EndpointPrimitiveRW * \defgroup Group_EndpointPrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3) - * \brief Endpoint primative read/write definitions for the Atmel AVR32 UC3 architecture. + * \brief Endpoint primitive read/write definitions for the Atmel AVR32 UC3 architecture. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to endpoints. @@ -198,7 +198,7 @@ #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8 #endif - /** Retrives the maximum bank size in bytes of a given endpoint. + /** Retrieves the maximum bank size in bytes of a given endpoint. * * \note This macro will only work correctly on endpoint indexes that are compile-time constants * defined by the preprocessor. diff --git a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h index 65b8011c9..7fd46a313 100644 --- a/LUFA/Drivers/USB/Core/UC3/Host_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Host_UC3.h @@ -331,7 +331,7 @@ */ uint8_t USB_Host_ClearPipeStall(const uint8_t EndpointIndex); - /** Selects a given alternative setting for the specfied interface, via a SET INTERFACE standard request to + /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to * the attached device. * * \note After this routine returns, the control pipe will be selected. diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h index bda3e8e2c..b6f015c11 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -45,7 +45,7 @@ /** \ingroup Group_PipePrimitiveRW * \defgroup Group_PipePrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3) - * \brief Pipe primative data read/write definitions for the Atmel AVR32 UC3 architecture. + * \brief Pipe primitive data read/write definitions for the Atmel AVR32 UC3 architecture. * * Functions, macros, variables, enums and types related to data reading and writing of primitive data types * from and to pipes. diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt index 777ac0db2..27a25e75f 100644 --- a/LUFA/ManPages/ChangeLog.txt +++ b/LUFA/ManPages/ChangeLog.txt @@ -55,8 +55,8 @@ * - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus) * - Internal restructuring for eventual multiple architecture ports * - Added AVR32 UC3 architecture port (currently incomplete/experimental) - * - Added new architecture independant functions to enable, disable, save and restore the Global Interrupt Enable flags - * - Added new RNDIS Device Classs Driver packet send and receive functions + * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags + * - Added new RNDIS Device Class Driver packet send and receive functions * - Library Applications: * - Added ability to write protect Mass Storage disk write operations from the host OS * - Added new MIDIToneGenerator project @@ -97,7 +97,7 @@ * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures * - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures - * - Seperated out board drivers by architecture in the library internals for better organisation + * - Separated out board drivers by architecture in the library internals for better organisation * - Library Applications: * - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode * via the Input Capture register, to reduce user confusion @@ -108,7 +108,7 @@ * - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition * - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0 * for other uses - * - Updated the software USART code in the XPLAIN Bridge application so that the incomming bits are sampled at their mid-point + * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point * instead of starting point, to give maximum reliability (thanks to Anton Staaf) * * Fixed: @@ -123,7 +123,7 @@ * - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect * error code enum (thanks to Daniel Seibert) * - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used - * - Fixed incorect BUTTONS_BUTTON1 definition for the Minimus board + * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board * - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe) * is found * - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine @@ -168,7 +168,7 @@ * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team) * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management * tasks for each driver is called - * - Added standard keyboard HID report scancode defines (thanks to Laszlo Monda) + * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda) * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions * - Library Applications: * - Added default test tone generation mode to the Device mode AudioInput demos diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt index 660cdcfb2..5e9e0990e 100644 --- a/LUFA/ManPages/CompileTimeTokens.txt +++ b/LUFA/ManPages/CompileTimeTokens.txt @@ -83,8 +83,8 @@ * * ORDERED_EP_CONFIG - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - AVR8 Only \n * The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they must be configured in an ascending order to - * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialisation. This compile - * time token may be used to restrict the intialisation order to ascending indexes only in exchange for a smaller compiled binary size. + * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile + * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size. * * USE_STATIC_OPTIONS=x - (\ref Group_USBManagement) - All Architectures \n * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt index 47815ea44..4016bf52b 100644 --- a/LUFA/ManPages/FutureChanges.txt +++ b/LUFA/ManPages/FutureChanges.txt @@ -19,7 +19,7 @@ * -# Re-add interrupt Pipe/Endpoint support * -# Add makefile includes to reduce boilerplate in user makefiles * -# Update stream APIs to use DMA transfers on supported architectures - * -# Pull out third party libraries into a seperate folder and reference them as required + * -# Pull out third party libraries into a separate folder and reference them as required * -# Add a LUFA_YIELD macro for integration into a third-party RTOS * -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects * - Documentation/Support diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt index 83eb6e6a4..86bf22803 100644 --- a/LUFA/ManPages/MigrationInformation.txt +++ b/LUFA/ManPages/MigrationInformation.txt @@ -37,7 +37,7 @@ * * USB Core * - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of - * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimise the compiled program + * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimize the compiled program * size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering * in exchange for a smaller compiled binary size. * - The previous F_CLOCK symbol, required in the project makefile, has been renamed to F_USB. This is due to the previous name -- cgit v1.2.3